@article{TeumerCapitainRossJonesetal.2018,
  author    = {Teumer, T. and Capitain, C. and Ross-Jones, J. and Tippk{\"o}tter, Nils and R{\"a}dle, M. and Methner, F.-J.},
  title     = {In-line Haze Monitoring Using a Spectrally Resolved Back Scattering Sensor},
  series = {BrewingScience},
  volume    = {71},
  journal   = {BrewingScience},
  number    = {5/6},
  publisher = {Fachverlag Hans Carl},
  address   = {N{\"u}rnberg},
  issn      = {1613-2041},
  pages     = {49 -- 55},
  year      = {2018},
  abstract  = {In the present work an optical sensor in combination with a spectrally resolved detection device for in-line particle-size-monitoring for quality control in beer production is presented. The principle relies on the size and wavelength dependent backscatter of growing particles in fluids. Measured interference structures of backscattered light are compared with calculated theoretical values, based on Mie-Theory, and fitted with a linear least square method to obtain particle size distributions. For this purpose, a broadband light source in combination with a process-CCD-spectrometer (charge ? coupled device spectrometer) and process adapted fiber optics are used. The goal is the development of an easy and flexible measurement device for in-line-monitoring of particle size. The presented device can be directly installed in product fill tubes or vessels, follows CIP- (cleaning in place) and removes the need of sample taking. A proof of concept and preliminary results, measuring protein precipitation, are presented.},
  language  = {en}
}
@article{MistlerAnthoineButenweg2007,
  author    = {Mistler, Michael and Anthoine, A. and Butenweg, Christoph},
  title     = {In-plane and out-of-plane homogenisation of masonry},
  series = {Computers \& structures},
  volume    = {Volume 85},
  journal   = {Computers \& structures},
  number    = {Issues 17-18},
  issn      = {1879-2243 (E-Journal); 0045-7949 (Print)},
  doi       = {10.1016/j.compstruc.2006.08.087},
  pages     = {1321 -- 1330},
  year      = {2007},
  language  = {en}
}
@article{Digel2010,
  author    = {Digel, Ilya},
  title     = {In-situ biological decontamination of an ice melting probe},
  year      = {2010},
  language  = {en}
}
@inproceedings{DigelLeimenaDachwaldetal.2010,
  author    = {Digel, Ilya and Leimena, W. and Dachwald, Bernd and Linder, Peter and Porst, Dariusz and Kayser, Peter and Funke, O. and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard},
  title     = {In-situ biological decontamination of an ice melting probe : [abstract]},
  year      = {2010},
  abstract  = {The objective of our study was to investigate the efficacy of different in-situ decontamination protocols in the conditions of thermo-mechanical ice-melting.},
  subject      = {Sonde},
  language  = {en}
}
@article{PrumeReichenbergRoelofsetal.2004,
  author    = {Prume, Klaus and Reichenberg, B. and Roelofs, A. and Waser, R.},
  title     = {In-situ compensation of the parasitic capacitance for nanoscale hysteresis measurements / Schmitz, T. ; Prume, K. ; Reichenberg, B. ; Roelofs, A. ; Waser, R. ; Tiedke, S.},
  series = {Journal of the European Ceramic Society. 24 (2004), H. 6},
  journal   = {Journal of the European Ceramic Society. 24 (2004), H. 6},
  isbn      = {0955-2219},
  pages     = {1145 -- 1147},
  year      = {2004},
  language  = {en}
}
@article{KuhnertBialonskiNoenningetal.2013,
  author    = {Kuhnert, Marie-Therese and Bialonski, Stephan and Noenning, Nina and Mai, Heinke and Hinrichs, Hermann and Helmstaedter, Christoph and Lehnertz, Klaus},
  title     = {Incidental and intentional learning of verbal episodic material differentially modifies functional brain networks},
  series = {Plos one},
  volume    = {8},
  journal   = {Plos one},
  number    = {11},
  publisher = {PLOS},
  address   = {San Francisco},
  doi       = {10.1371/journal.pone.0080273},
  pages     = {e80273},
  year      = {2013},
  abstract  = {Learning- and memory-related processes are thought to result from dynamic interactions in large-scale brain networks that include lateral and mesial structures of the temporal lobes. We investigate the impact of incidental and intentional learning of verbal episodic material on functional brain networks that we derive from scalp-EEG recorded continuously from 33 subjects during a neuropsychological test schedule. Analyzing the networks' global statistical properties we observe that intentional but not incidental learning leads to a significantly increased clustering coefficient, and the average shortest path length remains unaffected. Moreover, network modifications correlate with subsequent recall performance: the more pronounced the modifications of the clustering coefficient, the higher the recall performance. Our findings provide novel insights into the relationship between topological aspects of functional brain networks and higher cognitive functions.},
  language  = {en}
}
@article{SiqueiraMolinnusBegingetal.2014,
  author    = {Siqueira, Jose R. and Molinnus, Denise and Beging, Stefan and Sch{\"o}ning, Michael Josef},
  title     = {Incorporating a hybrid urease-carbon nanotubes sensitive nanofilm on capacitive field-effect sensors for urea detection},
  series = {Analytical chemistry},
  volume    = {86},
  journal   = {Analytical chemistry},
  number    = {11},
  publisher = {ACS Publications},
  address   = {Columbus},
  issn      = {1520-6882 (E-Journal); 0003-2700 (Print); 0096-4484 (Print)},
  doi       = {10.1021/ac500458s},
  pages     = {5370 -- 5375},
  year      = {2014},
  abstract  = {The ideal combination among biomolecules and nanomaterials is the key for reaching biosensing units with high sensitivity. The challenge, however, is to find out a stable and sensitive film architecture that can be incorporated on the sensor's surface. In this paper, we report on the benefits of incorporating a layer-by-layer (LbL) nanofilm of polyamidoamine (PAMAM) dendrimer and carbon nanotubes (CNTs) on capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensors for detecting urea. Three sensor arrangements were studied in order to investigate the adequate film architecture, involving the LbL film with the enzyme urease: (i) urease immobilized directly onto a bare EIS [EIS-urease] sensor; (ii) urease atop the LbL film over the EIS [EIS-(PAMAM/CNT)-urease] sensor; and (iii) urease sandwiched between the LbL film and another CNT layer [EIS-(PAMAM/CNT)-urease-CNT]. The surface morphology of all three urea-based EIS biosensors was investigated by atomic force microscopy (AFM), while the biosensing abilities were studied by means of capacitance-voltage (C/V) and dynamic constant-capacitance (ConCap) measureaments at urea concentrations ranging from 0.1 mM to 100 mM. The EIS-urease and EIS-(PAMAM/CNT)-urease sensors showed similar sensitivity (∼18 mV/decade) and a nonregular signal behavior as the urea concentration increased. On the other hand, the EIS-(PAMAM/CNT)-urease-CNT sensor exhibited a superior output signal performance and higher sensitivity of about 33 mV/decade. The presence of the additional CNT layer was decisive to achieve a urea based EIS sensor with enhanced properties. Such sensitive architecture demonstrates that the incorporation of an adequate hybrid enzyme-nanofilm as sensing unit opens new prospects for biosensing applications using the field-effect sensor platform.},
  language  = {en}
}
@article{HeinzelSchaeferMuelleretal.2010,
  author    = {Heinzel, Alexander and Sch{\"a}fer, Ralf and M{\"u}ller, Hans-Wilhelm and Schieffer, Andre and Ingenhag, Ariane and Eickhoff, Simon B. and Northoff, Georg and Franz, Matthias and Hautzel, Hubertus},
  title     = {Increased Activation of the Supragenual Anterior Cingulate Cortex during Visual Emotional Processing in Male Subjects with High Degrees of Alexithymia: An Event-Related fMRI Study},
  series = {Psychotherapy and Psychosomatics},
  volume    = {79},
  journal   = {Psychotherapy and Psychosomatics},
  number    = {6},
  publisher = {Karger},
  address   = {Basel},
  issn      = {0033-3190},
  doi       = {10.1159/000320121},
  pages     = {363 -- 370},
  year      = {2010},
  abstract  = {Background: One of the most prominent neurobiological models of alexithymia assumes an altered function of the anterior cingulate cortex (ACC) as the crucial neural correlate of alexithymia. So far functional imaging studies have yielded inconclusive results. Therefore, we tested this hypothesis in healthy alexithymics and nonalexithymics in an event-related fMRI study. Methods: Thirty high- and 30 low-alexithymic right-handed male subjects (selected by the 20-item Toronto Alexithymia Scale, TAS-20) were investigated with event-related fMRI using a picture viewing paradigm. The stimuli consisted of happy, fearful and neutral facial expressions (Ekman-Friesen) as well as positive, negative and neutral pictures from the International Affective Picture System. Results: Contrasting the high-alexithymic with the low-alexithymic group we observed increased activation of the supragenual ACC for different emotional valences as well as for different emotional stimuli. Moreover, there was a positive correlation of the ACC with the individual TAS-20 scores but no correlations with the individual Beck Depression Inventory scores. Additionally, there was no difference in activity of the amygdala. Conclusions: We demonstrated that the supragenual ACC is constantly activated more strongly in alexithymic subjects and that this activation is related to the symptoms of alexithymia and not to associated symptoms such as depression. Therefore, our findings support the hypothesis of an altered function of the ACC in alexithymia.},
  language  = {en}
}
@article{EngelHoltmannUlberetal.2018,
  author    = {Engel, Mareike and Holtmann, Dirk and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Increased Biobutanol Production by Mediator-Less Electro-Fermentation},
  series = {Biotechnology Journal},
  volume    = {14},
  journal   = {Biotechnology Journal},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1860-7314},
  doi       = {10.1002/biot.201800514},
  year      = {2018},
  abstract  = {A future bio-economy should not only be based on renewable raw materials but also in the raise of carbon yields of existing production routes. Microbial electrochemical technologies are gaining increased attention for this purpose. In this study, the electro-fermentative production of biobutanol with C. acetobutylicum without the use of exogenous mediators is investigated regarding the medium composition and the reactor design. It is shown that the use of an optimized synthetic culture medium allows higher product concentrations, increased biofilm formation, and higher conductivities compared to a synthetic medium supplemented with yeast extract. Moreover, the optimization of the reactor system results in a doubling of the maximum product concentrations for fermentation products. When a working electrode is polarized at -600 mV vs. Ag/AgCl, a shift from butyrate to acetone and butanol production is induced. This leads to an increased final solvent yield of Yᴀᴃᴇ = 0.202 gg⁻¹ (control 0.103 gg⁻¹), which is also reflected in a higher carbon efficiency of 37.6\% compared to 23.3\% (control) as well as a fourfold decrease in simplified E-factor to 0.43. The results are promising for further development of biobutanol production in bioelectrochemical systems in order to fulfil the principles of Green Chemistry.},
  language  = {en}
}
@article{HeinkeKnickerAlbracht2020,
  author    = {Heinke, Lars N. and Knicker, Axel J. and Albracht, Kirsten},
  title     = {Increased shoulder muscle stretch reflex elicitability in supine subject posture},
  series = {Isokinetics and Exercise Science},
  volume    = {28},
  journal   = {Isokinetics and Exercise Science},
  number    = {2},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1878-5913},
  doi       = {10.3233/IES-192219},
  pages     = {139 -- 146},
  year      = {2020},
  abstract  = {BACKGROUND: Muscle stretch reflexes are widely used to examine neural muscle function. The knowledge of reflex response in muscles crossing the shoulder is limited. OBJECTIVE: To quantify reflex modulation according to various subject postures and different procedures of muscle pre-activation steering. METHODS: Thirteen healthy male participants performed two sets of external shoulder rotation stretches in various positions and with different procedures of muscle pre-activation steering on an isokinetic dynamometer over a range of two different pre-activation levels. All stretches were applied with a dynamometer acceleration of 104∘/s2 and a velocity of 150∘/s. Electromyographical response was measured via sEMG. RESULTS: Consistent reflexive response was observed in all tested muscles in all experimental conditions. The reflex elicitation rate revealed a significant muscle main effect (F (5,288) = 2.358, ρ= 0.040; η2= 0.039; f= 0.637) and a significant test condition main effect (F (1,288) = 5.884, ρ= 0.016; η2= 0.020; f= 0.143). Reflex latency revealed a significant muscle pre-activation level main effect (F (1,274) = 5.008, ρ= 0.026; η2= 0.018; f= 0.469). CONCLUSION: Muscular reflexive response was more consistent in the primary internal rotators of the shoulder. Supine posture in combination with visual feedback of muscle pre-activation level enhanced the reflex elicitation rate.},
  language  = {en}
}
@article{LevesqueSiegwolfEilmannetal.2014,
  author    = {L{\´e}vesque, Mathieu and Siegwolf, Rolf and Eilmann, Britta and Saurer, Matthias and Rigling, Andreas},
  title     = {Increased water-use efficiency does not lead to enhanced tree growth under xeric and mesic conditions},
  series = {New Phytologist},
  volume    = {203},
  journal   = {New Phytologist},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1469-8137 (Online)},
  doi       = {10.1111/nph.12772},
  pages     = {94 -- 109},
  year      = {2014},
  language  = {en}
}
@article{MartinezJakobTuetal.2013,
  author    = {Martinez, Ronny and Jakob, Felix and Tu, Ran and Siegert, Petra and Maurer, Karl-Heinz and Schwaneberg, Ulrich},
  title     = {Increasing activity and thermal resistance of Bacillus gibsonii alkaline protease (BgAP) by directed evolution},
  series = {Biotechnology and bioengineering},
  volume    = {Vol. 110},
  journal   = {Biotechnology and bioengineering},
  number    = {Iss. 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1097-0290 (E-Journal); 0006-3592 (Print); 0368-1467 (Print)},
  pages     = {711 -- 720},
  year      = {2013},
  language  = {en}
}
@inproceedings{ThenentDahmann2011,
  author    = {Thenent, N. E. and Dahmann, Peter},
  title     = {Increasing aircraft design flexibility - The development of a hydrostatic transmission for gliders with self-launching capability},
  series = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  isbn      = {978-3-9321-8274-7},
  pages     = {865 -- 883},
  year      = {2011},
  language  = {en}
}
@article{KraftHeerRetkowitz2008,
  author    = {Kraft, Bodo and Heer, Thomas and Retkowitz, Daniel},
  title     = {Incremental Ontology Integration / Heer, Thomas ; Retkowitz, Daniel ; Kraft, Bodo},
  series = {Proceedings of the 10th International Conference on Enterprise Information Systems : Barcelona, Spain, June 12 - 16, 2008 / organized by INSTICC, Institute for Systems and Technologies of Information, Control and Communication ... [Ed. by Jos{\´e} Cordeiro ...]},
  journal   = {Proceedings of the 10th International Conference on Enterprise Information Systems : Barcelona, Spain, June 12 - 16, 2008 / organized by INSTICC, Institute for Systems and Technologies of Information, Control and Communication ... [Ed. by Jos{\´e} Cordeiro ...]},
  publisher = {INSTICC},
  address   = {Setubal},
  pages     = {13 -- 28},
  year      = {2008},
  language  = {en}
}
@inproceedings{NiemuellerLakemeyerFerrein2013,
  author    = {Niem{\"u}ller, Tim and Lakemeyer, Gerhard and Ferrein, Alexander},
  title     = {Incremental task-level reasoning in a competitive factory automation scenario},
  series = {Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)},
  booktitle = {Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)},
  editor    = {Boots, Byron},
  organization    = {American Association for Artificial Intelligence},
  isbn      = {9781577356011},
  pages     = {43 -- 48},
  year      = {2013},
  language  = {en}
}
@article{HenriquesJuradoGrieseretal.2020,
  author    = {Henriques, A. and Jurado, B. and Grieser, M. and Denis-Petit, D. and Chiron, T. and Gaudefroy, L. and Glorius, J. and Langer, Christoph and Litvinov, Yu. A. and Mathieu, L. and Meot, V. and Perez-Sanchez, R. and Pibernat, J. and Reifarth, R. and Roig, O. and Thomas, B. and Thomas, B. A. and Thomas, J. C. and Tsekhanovich, I.},
  title     = {Indirect measurements of neutron cross-secti at heavy-ion storage rings},
  series = {Journal of Physics: Conference Series},
  volume    = {1668},
  journal   = {Journal of Physics: Conference Series},
  number    = {Art. 012019},
  publisher = {IOP},
  address   = {Bristol},
  doi       = {10.1088/1742-6596/1668/1/012019},
  year      = {2020},
  abstract  = {Cross sections for neutron-induced reactions of short-lived nuclei are essential for nuclear astrophysics since these reactions in the stars are responsible for the production of most heavy elements in the universe. These reactions are also key in applied domains like energy production and medicine. Nevertheless, neutron-induced cross-section measurements can be extremely challenging or even impossible to perform due to the radioactivity of the targets involved. Indirect measurements through the surrogate-reaction method can help to overcome these difficulties. The surrogate-reaction method relies on the use of an alternative reaction that will lead to the formation of the same excited nucleus as in the neutron-induced reaction of interest. The decay probabilities (for fission, neutron and gamma-ray emission) of the nucleus produced via the surrogate reaction allow one to constrain models and the prediction of the desired neutron cross sections. We propose to perform surrogate reaction measurements in inverse kinematics at heavy-ion storage rings, in particular at the CRYRING@ESR of the GSI/FAIR facility. We present the conceptual idea of the most promising setup to measure for the first time simultaneously the fission, neutron and gamma-ray emission probabilities. The results of the first simulations considering the 238U(d,d') reaction are shown, as well as new technical developments that are being carried out towards this set-up.},
  language  = {en}
}
@inproceedings{HoeflingSchirraSpohretal.2013,
  author    = {Hoefling, J. and Schirra, Julian and Spohr, A. and Sch{\"a}fer, D.},
  title     = {Induced drag computation with wake model schemes for highly non-planar wing systems},
  series = {Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart},
  publisher = {Dt. Ges. f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  organization    = {Deutscher Luft- und Raumfahrtkongress <62, 2013, Stuttgart>},
  pages     = {1 -- 10},
  year      = {2013},
  language  = {en}
}
@article{KernHeidlerZischank1998,
  author    = {Kern, Alexander and Heidler, F. and Zischank, W.},
  title     = {Induced overvoltages in cable ducts taking into account the current flow into earth / F. Heidler ; W. Zischank ... A. Kern ...},
  series = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  journal   = {Conference proceedings : 14th - 18th September 1998, [Burlington Hotel, Birmingham, United Kingdom] / organised by: School of Engineering and Advanced Technology, Staffordshire University, United Kingdom},
  address   = {Birmingham},
  year      = {1998},
  language  = {en}
}
@article{HeroldBrandtSeibleretal.2008,
  author    = {Herold, Marco J. and Brandt, Jens van den and Seibler, Jost and Reichardt, Holger M.},
  title     = {Inducible and reversible gene silencing by stable integration of an shRNA-encoding lentivirus in transgenic rats},
  series = {Proceedings of the National Academy of Sciences of the United States of America},
  volume    = {105},
  journal   = {Proceedings of the National Academy of Sciences of the United States of America},
  number    = {47},
  issn      = {1091-6490},
  doi       = {10.1073/pnas.0806213105},
  pages     = {18507 -- 18512},
  year      = {2008},
  language  = {en}
}
@article{KotnikPopovaTodirasetal.2009,
  author    = {Kotnik, Katarina and Popova, Elena and Todiras, Mihail and Mori, Marcelo A. and Alenina, Natalia and Seibler, Jost and Bader, Michael},
  title     = {Inducible transgenic rat model for diabetes mellitus based on shRNA-mediated gene knockdown},
  series = {Plos One},
  volume    = {4},
  journal   = {Plos One},
  number    = {4},
  publisher = {Plos},
  address   = {San Francisco, California, US},
  doi       = {10.1371/journal.pone.0005124},
  pages     = {e5124},
  year      = {2009},
  language  = {en}
}
@incollection{KuemmellHillgaertner2015,
  author    = {K{\"u}mmell, Steffen and Hillg{\"a}rtner, Michael},
  title     = {Inductive charging comfortable and nonvisible charging stations for urbanised areas},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_16},
  pages     = {297 -- 309},
  year      = {2015},
  abstract  = {For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today's state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles' needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future's inductive charging infrastructures, several field tests had been carried out and are planned in near future.},
  language  = {en}
}
@inproceedings{HecklWeilerFleischhakeretal.2014,
  author    = {Heckl, O. H. and Weiler, Sascha and Fleischhaker, Robert and Gebs, Raphael and Budnicki, Aleksander and Wolf, M. and Kleinbauer, Jochen and Russ, S. and Kumkar, M. and Sutter, Dirk H.},
  title     = {Industry-grade high average power femtosecond light source},
  series = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)},
  booktitle = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)},
  editor    = {Heisterkamp, Alexander and Herman, Peter R. and Meunier, Michael and Nolte, Stefan},
  publisher = {SPIE, International Society for Optical Engineering},
  doi       = {10.1117/12.2039337},
  pages     = {89720P -- 89720P-7},
  year      = {2014},
  language  = {en}
}
@book{Bialonski2012,
  author    = {Bialonski, Stephan},
  title     = {Inferring complex networks from time series of dynamical systems: Pitfalls, misinterpretations, and possible solutions},
  publisher = {Universit{\"a}ts- und Landesbibliothek Bonn},
  address   = {Bonn},
  pages     = {Online-Ausgabe (III, 135 S. : Ill., graph. Darst.)},
  year      = {2012},
  language  = {en}
}
@article{NguyenDuongTranetal.2012,
  author    = {Nguyen, Nhu Huynh and Duong, Minh Tuan and Tran, Thanh Ngoc and Pham, Phu Tinh and Grottke, O. and Tolba, R. and Staat, Manfred},
  title     = {Influence of a freeze-thaw cycle on the stress-stretch curves of tissues of porcine abdominal organs},
  series = {Journal of Biomechanics},
  volume    = {45},
  journal   = {Journal of Biomechanics},
  number    = {14},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380},
  doi       = {10.1016/j.jbiomech.2012.07.008},
  pages     = {2382 -- 2386},
  year      = {2012},
  abstract  = {The paper investigates both fresh porcine spleen and liver and the possible decomposition of these organs under a freeze-thaw cycle. The effect of tissue preservation condition is an important factor which should be taken into account for protracted biomechanical tests. In this work, tension tests were conducted for a large number of tissue specimens from twenty pigs divided into two groups of 10. Concretely, the first group was tested in fresh state; the other one was tested after a freeze-thaw cycle which simulates the conservation conditions before biomechanical experiments. A modified Fung model for isotropic behavior was adopted for the curve fitting of each kind of tissues. Experimental results show strong effects of the realistic freeze-thaw cycle on the capsule of elastin-rich spleen but negligible effects on the liver which virtually contains no elastin. This different behavior could be explained by the autolysis of elastin by elastolytic enzymes during the warmer period after thawing. Realistic biomechanical properties of elastin-rich organs can only be expected if really fresh tissue is tested. The observations are supported by tests of intestines.},
  language  = {en}
}
@article{KuhnhenneRegerPyschnyetal.2020,
  author    = {Kuhnhenne, Markus and Reger, Vitali and Pyschny, Dominik and D{\"o}ring, Bernd},
  title     = {Influence of airtightness of steel sandwich panel joints on heat losses},
  series = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  volume    = {172},
  journal   = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  number    = {Art. 05008},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  doi       = {10.1051/e3sconf/202017205008},
  pages     = {6},
  year      = {2020},
  abstract  = {Energy saving ordinances requires that buildings must be designed in such a way that the heat transfer surface including the joints is permanently air impermeable. The prefabricated roof and wall panels in lightweight steel constructions are airtight in the area of the steel covering layers. The sealing of the panel joints contributes to fulfil the comprehensive requirements for an airtight building envelope. To improve the airtightness of steel sandwich panels, additional sealing tapes can be installed in the panel joint. The influence of these sealing tapes was evaluated by measurements carried out by the RWTH Aachen University - Sustainable Metal Building Envelopes. Different installation situations were evaluated by carrying out airtightness tests for different joint distances. In addition, the influence on the heat transfer coefficient was also evaluated using the Finite Element Method (FEM). The combination of obtained air volume flow and transmission losses enables to create an "effective heat transfer coefficient" due to transmission and infiltration. This summarizes both effects in one value and is particularly helpful for approximate calculations on energy efficiency.},
  language  = {en}
}
@incollection{SchneiderWisselinkNoelleetal.2020,
  author    = {Schneider, Dominik and Wisselink, Frank and N{\"o}lle, Nikolai and Czarnecki, Christian},
  title     = {Influence of artificial intelligence on commercial interactions in the consumer market},
  series = {Automatisierung und Personalisierung von Dienstleistungen : Methoden - Potenziale - Einsatzfelder},
  booktitle = {Automatisierung und Personalisierung von Dienstleistungen : Methoden - Potenziale - Einsatzfelder},
  editor    = {Bruhn, Manfred and Hadwich, Karsten},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-30167-5 (Print)},
  doi       = {10.1007/978-3-658-30168-2_7},
  pages     = {183 -- 205},
  year      = {2020},
  abstract  = {Recently, novel AI-based services have emerged in the consumer market. AI-based services can affect the way consumers take commercial decisions. Research on the influence of AI on commercial interactions is in its infancy. In this chapter, a framework creating a first overview of the influence of AI on commercial interactions is introduced. This framework summarizes the findings of comparing numerous customer journeys of novel AI-based services with corresponding non-AI equivalents.},
  language  = {en}
}
@inproceedings{SauerbornArshadiRohrmoser2012,
  author    = {Sauerborn, Markus and Arshadi, S. and Rohrmoser, R.},
  title     = {Influence of clouds and aerosols to the haze of the sunshape},
  series = {30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 5},
  booktitle = {30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 5},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {International Solar Energy Society},
  pages     = {3887 -- 3894},
  year      = {2012},
  language  = {en}
}
@inproceedings{BungLangohrWaldenberger2023,
  author    = {Bung, Daniel Bernhard and Langohr, Phillip and Waldenberger, Lisa},
  title     = {Influence of cycle number in CFD studies of labyrinth weirs},
  series = {Proceedings of the 40th IAHR World Congress (Vienna, 2023)},
  booktitle = {Proceedings of the 40th IAHR World Congress (Vienna, 2023)},
  editor    = {Habersack, Helmut and Tritthart, Michael},
  publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)},
  address   = {Madrid},
  isbn      = {978-90-833476-1-5},
  issn      = {L 2521-7119 (online)},
  doi       = {10.3850/978-90-833476-1-5_iahr40wc-p0531-cd},
  year      = {2023},
  abstract  = {The major advantage of labyrinth weirs over linear weirs is hydraulic efficiency. In hydraulic modeling efforts, this strength contrasts with limited pump capacity as well as limited computational power for CFD simulations. For the latter, reducing the number of investigated cycles can significantly reduce necessary computational time. In this study, a labyrinth weir with different cycle numbers was investigated. The simulations were conducted in FLOW-3D HYDRO as a Large Eddy Simulation. With a mean deviation of 1.75 \% between simulated discharge coefficients and literature design equations, a reasonable agreement was found. For downstream conditions, overall consistent results were observed as well. However, the orientation of labyrinth weirs with a single cycle should be chosen carefully under consideration of the individual research purpose.},
  language  = {en}
}
@article{JanusAchtsnichtTempeletal.2023,
  author    = {Janus, Kevin Alexander and Achtsnicht, Stefan and Tempel, Laura and Drinic, Aleksaner and Kopp, Alexander and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Influence of fibroin membrane composition and curing parameters on the performance of a biodegradable enzymatic biosensor manufactured from Silicon-Free Carbon},
  series = {Physica status solidi : pss. A, Applications and materials science},
  volume    = {220},
  journal   = {Physica status solidi : pss. A, Applications and materials science},
  number    = {22},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6300 (Print)},
  doi       = {10.1002/pssa.202300081},
  pages     = {10 Seiten},
  year      = {2023},
  abstract  = {Herein, fibroin, polylactide (PLA), and carbon are investigated for their suitability as biocompatible and biodegradable materials for amperometric biosensors. For this purpose, screen-printed carbon electrodes on the biodegradable substrates fibroin and PLA are modified with a glucose oxidase membrane and then encapsulated with the biocompatible material Ecoflex. The influence of different curing parameters of the carbon electrodes on the resulting biosensor characteristics is studied. The morphology of the electrodes is investigated by scanning electron microscopy, and the biosensor performance is examined by amperometric measurements of glucose (0.5-10 mM) in phosphate buffer solution, pH 7.4, at an applied potential of 1.2 V versus a Ag/AgCl reference electrode. Instead of Ecoflex, fibroin, PLA, and wound adhesive are tested as alternative encapsulation compounds: a series of swelling tests with different fibroin compositions, PLA, and Ecoflex has been performed before characterizing the most promising candidates by chronoamperometry. Therefore, the carbon electrodes are completely covered with the particular encapsulation material. Chronoamperometric measurements with H2O2 concentrations between 0.5 and 10 mM enable studying the leakage current behavior.},
  language  = {en}
}
@phdthesis{Albracht2010,
  author    = {Albracht, Kirsten},
  title     = {Influence of mechanical properties of the leg extensor muscletendon units on running economy},
  publisher = {Deutsche Sporthochschule K{\"o}ln},
  address   = {K{\"o}ln},
  pages     = {X, 1221 Bl. : graph. Darst.},
  year      = {2010},
  language  = {en}
}
@article{PaulssenLeLengkeeketal.2013,
  author    = {Paulßen, Elisabeth and Le, Van So and Lengkeek, Nigel and Pellegrini, Paul and Jackson, Tim and Greguric, Ivan and Weiner, Ron},
  title     = {Influence of Metal Ions on the 68Ga-labeling of DOTATATE},
  series = {Applied Radiation and Isotopes},
  volume    = {82},
  journal   = {Applied Radiation and Isotopes},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9800},
  doi       = {10.1016/j.apradiso.2013.08.010},
  pages     = {232 -- 238},
  year      = {2013},
  language  = {en}
}
@article{ArtmannSchmidSchoenbeinSchroederetal.1988,
  author    = {Artmann, Gerhard and Schmid-Sch{\"o}nbein, H. and Schr{\"o}der, Susanne and Grebe, R. [u.a.]},
  title     = {Influence of Moxaverine-HCL on Membrane Curvature and Microsieve Filterability of Red Cells after Exposure to Hyperosmolarity and Lactacidosis. Schmid-Sch{\"o}nbein, H.; Schr{\"o}der, Susanne; Grebe, R.; Artmann, Gerhard Michael, Eschweiler, H; Teitel, P.},
  series = {Arzneimittelforschung. 38 (1988), H. 5},
  journal   = {Arzneimittelforschung. 38 (1988), H. 5},
  isbn      = {0004-4172},
  pages     = {710 -- 716},
  year      = {1988},
  language  = {en}
}
@article{BullerschenWilhelmiWimmer1985,
  author    = {Bullerschen, Klaus-Gerd and Wilhelmi, Herbert and Wimmer, W.},
  title     = {Influence of non-uniform material properties and water cooling on current density and temperature profiles in arc furnace elektrodes},
  series = {Steel Research. 56 (1985), H. 11},
  journal   = {Steel Research. 56 (1985), H. 11},
  isbn      = {0177-4832},
  pages     = {559 -- 564},
  year      = {1985},
  language  = {en}
}
@article{HavermannKainumaTakayama2005,
  author    = {Havermann, Marc and Kainuma, M. and Takayama, K.},
  title     = {Influence of Physical and Geometrical Parameters on Vortex Rings Generated by a Shock Tube / Havermann, M. ; Kainuma, M. ; Takayama, K.},
  series = {Non-lethal options enhancing security and stability : 3rd European Symposium on Non-Lethal Weapons, May 10 - 12, 2005, Ettlingen, Germany / ICT, Fraunhofer-Institut Chemische Technologie; European Working Group Non-Lethal Weapons},
  journal   = {Non-lethal options enhancing security and stability : 3rd European Symposium on Non-Lethal Weapons, May 10 - 12, 2005, Ettlingen, Germany / ICT, Fraunhofer-Institut Chemische Technologie; European Working Group Non-Lethal Weapons},
  publisher = {ICT},
  address   = {Pfinztal},
  pages     = {getr. Z{\"a}hlung [ca. 600 S.]},
  year      = {2005},
  language  = {en}
}
@inproceedings{ŠakićMilijašMarinkovićetal.2021,
  author    = {Šakić, Bogdan and Milijaš, Aleksa and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven},
  title     = {Influence of prior in-plane damage on the out-of-plane response of non-load bearing unreinforced masonry walls under seismic load},
  series = {Proceedings of COMPDYN 2021},
  booktitle = {Proceedings of COMPDYN 2021},
  editor    = {Papadrakakis, Manolis and Fragiadakis, Michalis},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  isbn      = {9786188507258},
  issn      = {2623-3347},
  doi       = {10.7712/120121.8527.18913},
  pages     = {808 -- 828},
  year      = {2021},
  abstract  = {Reinforced concrete frames with masonry infill walls are popular form of construction all over the world as well in seismic regions. While severe earthquakes can cause high level of damage of both reinforced concrete and masonry infills, earthquakes of lower to medium intensity some-times can cause significant level of damage of masonry infill walls. Especially important is the level of damage of face loaded infill masonry walls (out-of-plane direction) as out-of-plane load cannot only bring high level of damage to the wall, it can also be life-threating for the people near the wall. The response in out-of-plane direction directly depends on the prior in-plane damage, as previous investigation shown that it decreases resistance capacity of the in-fills. Behaviour of infill masonry walls with and without prior in-plane load is investigated in the experimental campaign and the results are presented in this paper. These results are later compared with analytical approaches for the out-of-plane resistance from the literature. Conclusions based on the experimental campaign on the influence of prior in-plane damage on the out-of-plane response of infill walls are compared with the conclusions from other authors who investigated the same problematic.},
  language  = {en}
}
@article{DuongNguyenTranetal.2015,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Tran, Thanh Ngoc and Tolba, R. H. and Staat, Manfred},
  title     = {Influence of refrigerated storage on tensile mechanical properties of porcine liver and spleen},
  series = {International biomechanics},
  volume    = {Vol. 2},
  journal   = {International biomechanics},
  number    = {Iss. 1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {2333-5432},
  doi       = {10.1080/23335432.2015.1049295},
  pages     = {79 -- 88},
  year      = {2015},
  language  = {en}
}
@article{LenzKahmannBehbahanietal.2022,
  author    = {Lenz, Maximilian and Kahmann, Stephanie Lucina and Behbahani, Mehdi and Pennig, Lenhard and Hackl, Michael and Leschinger, Tim and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {Influence of rotator cuff preload on fracture configuration in proximal humerus fractures: a proof of concept for fracture simulation},
  series = {Archives of Orthopaedic and Trauma Surgery},
  journal   = {Archives of Orthopaedic and Trauma Surgery},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1434-3916},
  doi       = {10.1007/s00402-022-04471-9},
  year      = {2022},
  abstract  = {Introduction In regard of surgical training, the reproducible simulation of life-like proximal humerus fractures in human cadaveric specimens is desirable. The aim of the present study was to develop a technique that allows simulation of realistic proximal humerus fractures and to analyse the influence of rotator cuff preload on the generated lesions in regards of fracture configuration. Materials and methods Ten cadaveric specimens (6 left, 4 right) were fractured using a custom-made drop-test bench, in two groups. Five specimens were fractured without rotator cuff preload, while the other five were fractured with the tendons of the rotator cuff preloaded with 2 kg each. The humeral shaft and the shortened scapula were potted. The humerus was positioned at 90° of abduction and 10° of internal rotation to simulate a fall on the elevated arm. In two specimens of each group, the emergence of the fractures was documented with high-speed video imaging. Pre-fracture radiographs were taken to evaluate the deltoid-tuberosity index as a measure of bone density. Post-fracture X-rays and CT scans were performed to define the exact fracture configurations. Neer's classification was used to analyse the fractures. Results In all ten cadaveric specimens life-like proximal humerus fractures were achieved. Two III-part and three IV-part fractures resulted in each group. The preloading of the rotator cuff muscles had no further influence on the fracture configuration. High-speed videos of the fracture simulation revealed identical fracture mechanisms for both groups. We observed a two-step fracture mechanism, with initial impaction of the head segment against the glenoid followed by fracturing of the head and the tuberosities and then with further impaction of the shaft against the acromion, which lead to separation of the tuberosities. Conclusion A high energetic axial impulse can reliably induce realistic proximal humerus fractures in cadaveric specimens. The preload of the rotator cuff muscles had no influence on initial fracture configuration. Therefore, fracture simulation in the proximal humerus is less elaborate. Using the presented technique, pre-fractured specimens are available for real-life surgical education.},
  language  = {en}
}
@article{ŠakićMarinkovićButenwegetal.2023,
  author    = {Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven},
  title     = {Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls},
  series = {Engineering Structures},
  volume    = {276},
  journal   = {Engineering Structures},
  editor    = {Yang, J.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2022.115342},
  year      = {2023},
  abstract  = {Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural elements. Therefore, their behaviour under earthquake loading in out-of-plane (OOP) direction is investigated by several researches in the past years. However, none of the existing experimental campaigns or analytical approaches consider the influence of prior slab deflection on OOP response of partition walls. Moreover, none of the existing construction techniques for the connection of partition walls with surrounding reinforced concrete (RC) is investigated for the combined slab deflection and OOP loading. However, the inevitable time-dependent behaviour of RC slabs leads to high values of final slab deflections which can further influence boundary conditions of partition walls. Therefore, a comprehensive study on the influence of slab deflection on the OOP capacity of masonry partitions is conducted. In the first step, experimental tests are carried out. Results of experimental tests are further used for the calibration of the numerical model employed for a parametric study. Based on the results, behaviour under combined loading for different construction techniques is explained. The results show that slab deflection leads either to severe damage or to a high reduction of OOP capacity. Existing practical solutions do not account for these effects. In this contribution, recommendations to overcome the problems of combined slab deflection and OOP loading on masonry partition walls are given. Possible interaction of in-plane (IP) loading, with the combined slab deflection and OOP loading on partition walls, is not investigated in this study.},
  language  = {en}
}
@article{BertzSchoeningMolinnusetal.2024,
  author    = {Bertz, Morten and Sch{\"o}ning, Michael Josef and Molinnus, Denise and Homma, Takayuki},
  title     = {Influence of temperature, light, and H₂O₂ concentration on microbial spore inactivation: in-situ Raman spectroscopy combined with optical trapping},
  series = {Physica status solidi (a) applications and materials science},
  journal   = {Physica status solidi (a) applications and materials science},
  number    = {Early View},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {1862-6319 (Online)},
  doi       = {10.1002/pssa.202300866},
  pages     = {8 Seiten},
  year      = {2024},
  abstract  = {To gain insight on chemical sterilization processes, the influence of temperature (up to 70 °C), intense green light, and hydrogen peroxide (H₂O₂) concentration (up to 30\% in aqueous solution) on microbial spore inactivation is evaluated by in-situ Raman spectroscopy with an optical trap. Bacillus atrophaeus is utilized as a model organism. Individual spores are isolated and their chemical makeup is monitored under dynamically changing conditions (temperature, light, and H₂O₂ concentration) to mimic industrially relevant process parameters for sterilization in the field of aseptic food processing. While isolated spores in water are highly stable, even at elevated temperatures of 70 °C, exposure to H₂O₂ leads to a loss of spore integrity characterized by the release of the key spore biomarker dipicolinic acid (DPA) in a concentration-dependent manner, which indicates damage to the inner membrane of the spore. Intensive light or heat, both of which accelerate the decomposition of H₂O₂ into reactive oxygen species (ROS), drastically shorten the spore lifetime, suggesting the formation of ROS as a rate-limiting step during sterilization. It is concluded that Raman spectroscopy can deliver mechanistic insight into the mode of action of H₂O₂-based sterilization and reveal the individual contributions of different sterilization methods acting in tandem.},
  language  = {en}
}
@article{KoppSchunckGosauetal.2020,
  author    = {Kopp, Alexander and Schunck, Laura and Gosau, Martin and Smeets, Ralf and Burg, Simon and Fuest, Sandra and Kr{\"o}ger, Nadja and Zinser, Max and Krohn, Sebastian and Behbahani, Mehdi and K{\"o}pf, Marius and Lauts, Lisa and Rutkowski, Rico},
  title     = {Influence of the casting concentration on the mechanical and optical properties of Fa/CaCl2-derived silk fibroin membranes},
  series = {International Journal of Molecular Sciences},
  volume    = {21},
  journal   = {International Journal of Molecular Sciences},
  number    = {18 art. no. 6704},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1422-0067},
  doi       = {10.3390/ijms21186704},
  year      = {2020},
  abstract  = {In this study, we describe the manufacturing and characterization of silk fibroin membranes derived from the silkworm Bombyx mori. To date, the dissolution process used in this study has only been researched to a limited extent, although it entails various potential advantages, such as reduced expenses and the absence of toxic chemicals in comparison to other conventional techniques. Therefore, the aim of this study was to determine the influence of different fibroin concentrations on the process output and resulting membrane properties. Casted membranes were thus characterized with regard to their mechanical, structural and optical assets via tensile testing, SEM, light microscopy and spectrophotometry. Cytotoxicity was evaluated using BrdU, XTT, and LDH assays, followed by live-dead staining. The formic acid (FA) dissolution method was proven to be suitable for the manufacturing of transparent and mechanically stable membranes. The fibroin concentration affects both thickness and transparency of the membranes. The membranes did not exhibit any signs of cytotoxicity. When compared to other current scientific and technical benchmarks, the manufactured membranes displayed promising potential for various biomedical applications. Further research is nevertheless necessary to improve reproducible manufacturing, including a more uniform thickness, less impurity and physiological pH within the membranes.},
  language  = {en}
}
@inproceedings{ZillerDoering2003,
  author    = {Ziller, Claudia and D{\"o}ring, Bernd},
  title     = {Influence of the external dynamic wind pressure on the ventilation of double facades},
  series = {Research in building physics: proceedings of the Second International Conference on Building Physics : Leuven, Belgium, 14-18 September 2003},
  booktitle = {Research in building physics: proceedings of the Second International Conference on Building Physics : Leuven, Belgium, 14-18 September 2003},
  editor    = {Carmeliet, J. and Hens, H. and Vermeir, G.},
  publisher = {Taylor and Francis},
  address   = {Hoboken},
  organization    = {International Conference on Building Physics <2, 2003, Leuven>},
  isbn      = {9058095657, 9789058095657},
  pages     = {527 -- 533},
  year      = {2003},
  language  = {en}
}
@article{HagemannBachmannLadeetal.1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Bachmann, P. K. and Lade, H. and Leers, D.},
  title     = {Influence of the gas phase on diamond deposition and diamond properties. Bachmann, P. K.; Hagemann, H.J.; Lade, H.; Leers, D.; Picht, F.; Wiechert, D. U.},
  series = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo},
  journal   = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo},
  publisher = {International Communications Specialists, Inc.},
  address   = {Tokyo},
  pages     = {115 -- 120},
  year      = {1994},
  language  = {en}
}
@article{AlbrachtArampatzis2006,
  author    = {Albracht, Kirsten and Arampatzis, Adamantios},
  title     = {Influence of the mechanical properties of the muscle-tendon unit on force generation in runners with different running economy},
  series = {Biological Cybernetics},
  volume    = {95},
  journal   = {Biological Cybernetics},
  number    = {1},
  issn      = {1432-0770},
  doi       = {10.1007/s00422-006-0070-z},
  pages     = {87 -- 96},
  year      = {2006},
  language  = {en}
}
@article{Hoepner2004,
  author    = {Hoepner, Gert},
  title     = {Info-Web-Generation},
  series = {Dm-compact : academic news for marketeers / Deutscher Direktmarketing Verband e. V.. 2 (2004), H. 3-4},
  journal   = {Dm-compact : academic news for marketeers / Deutscher Direktmarketing Verband e. V.. 2 (2004), H. 3-4},
  isbn      = {1573-3181},
  pages     = {14 -- 20},
  year      = {2004},
  language  = {en}
}
@incollection{RahierRitzWallenborn2015,
  author    = {Rahier, Michael and Ritz, Thomas and Wallenborn, Ramona},
  title     = {Information and communication technology for integrated mobility concepts such as E-carsharing},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_17},
  pages     = {311 -- 326},
  year      = {2015},
  abstract  = {During the past decade attitude towards sharing things has changed extremely. Not just personal data is shared (e.g. in social networks) but also mobility. Together with the increased ecological awareness of the recent years, new mobility concepts have evolved. E-carsharing has become a symbol for these changes of attitude. The management of a shared car fleet, the energy management of electric mobility and the management of various carsharing users with individual likes and dislikes are just some of the major challenges of e-carsharing. Weaving it into integrated mobility concepts, this raises complexity even further. These challenges can only be overcome by an appropriate amount of well-shaped information available at the right place and time. In order to gather, process and share the required information, fleet cars have to be equipped with modern information and communication technology (ICT) and become so-called fully connected cars. Ensuring the usability of these ICT systems is another challenge that is often neglected, even though it is usability that makes carsharing comfortable, attractive and supports users' new attitudes. By means of an integrated and consistent concept for human-machine interaction (HMI), the usability of such systems can be raised tremendously.},
  language  = {en}
}
@article{Ritz2000,
  author    = {Ritz, Thomas},
  title     = {Information Channels},
  series = {Information Technology. Nr. 52 (2000), H. 08. Mai 2000},
  journal   = {Information Technology. Nr. 52 (2000), H. 08. Mai 2000},
  pages     = {15 -- 15},
  year      = {2000},
  language  = {en}
}
@article{StulpeSinger1990,
  author    = {Stulpe, Werner and Singer, Matthias},
  title     = {Informational Incompleteness of the Observables Sx,Sy,Sz for Spin-1 Systems. Singer, Matthias; Stulpe, W.},
  series = {Foundations of Physics. 20 (1990), H. 4},
  journal   = {Foundations of Physics. 20 (1990), H. 4},
  isbn      = {1572-9516},
  pages     = {471 -- 472},
  year      = {1990},
  language  = {en}
}
@article{ArtmannZhouStacheBuettneretal.2002,
  author    = {Artmann, Gerhard and Zhou-Stache, J. and Buettner, R. and Mittermayer, C. [u.a.]},
  title     = {Inhibition of TNF-alpha induced cell death in HUVEC and Jurkat cells by protocatechuic acid. Zhou-Stache, J.; Buettner, R.; Artmann, Gerhard Michael; Mittermayer, C.; Bosserhoff, A. K.},
  series = {Medical and Biological Engineering and Computing. 40 (2002), H. 6},
  journal   = {Medical and Biological Engineering and Computing. 40 (2002), H. 6},
  isbn      = {0140-0118},
  pages     = {698 -- 703},
  year      = {2002},
  language  = {en}
}
@inproceedings{FingerGoettenBraun2018,
  author    = {Finger, Felix and G{\"o}tten, Falk and Braun, Carsten},
  title     = {Initial Sizing for a Family of Hybrid-Electric VTOL General Aviation Aircraft},
  series = {67. Deutscher Luft- und Raumfahrtkongress 2018},
  booktitle = {67. Deutscher Luft- und Raumfahrtkongress 2018},
  pages     = {14 S.},
  year      = {2018},
  language  = {en}
}
@article{FingerBilBraun2019,
  author    = {Finger, Felix and Bil, Cees and Braun, Carsten},
  title     = {Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft},
  series = {Journal of Aircraft},
  volume    = {57},
  journal   = {Journal of Aircraft},
  number    = {2},
  issn      = {1533-3868},
  doi       = {10.2514/1.C035428},
  pages     = {245 -- 255},
  year      = {2019},
  language  = {en}
}