@article{MennickenPeterKaulenetal.2020,
  author    = {Mennicken, Max and Peter, Sophia K. and Kaulen, Corinna and Simon, Ulrich and Karth{\"a}user, Silvia},
  title     = {Transport through Redox-Active Ru-Terpyridine Complexes Integrated in Single Nanoparticle Devices},
  series = {The Journal of Physical Chemistry C},
  volume    = {124},
  journal   = {The Journal of Physical Chemistry C},
  number    = {8},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {1932-7455},
  doi       = {10.1021/acs.jpcc.9b11716},
  pages     = {4881 -- 4889},
  year      = {2020},
  abstract  = {Transition metal complexes are electrofunctional molecules due to their high conductivity and their intrinsic switching ability involving a metal-to-ligand charge transfer. Here, a method is presented to contact reliably a few to single redox-active Ru-terpyridine complexes in a CMOS compatible nanodevice and preserve their electrical functionality. Using hybrid materials from 14 nm gold nanoparticles (AuNP) and bis-{4′-[4-(mercaptophenyl)-2,2′:6′,2″-terpyridine]}-ruthenium(II) complexes a device size of 30² nm² inclusive nanoelectrodes is achieved. Moreover, this method bears the opportunity for further downscaling. The Ru-complex AuNP devices show symmetric and asymmetric current versus voltage curves with a hysteretic characteristic in two well separated conductance ranges. By theoretical approximations based on the single-channel Landauer model, the charge transport through the formed double-barrier tunnel junction is thoroughly analyzed and its sensibility to the molecule/metal contact is revealed. It can be verified that tunneling transport through the HOMO is the main transport mechanism while decoherent hopping transport is present to a minor extent.},
  language  = {en}
}
@inproceedings{BayerHeschelerArtmannetal.2019,
  author    = {Bayer, Robin and Hescheler, J{\"u}rgen and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Treating arterial hypertension in a cell culture well},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH AachenW},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH AachenW},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {5 -- 6},
  year      = {2019},
  abstract  = {Hypertension describes the pathological increase of blood pressure, which is most commonly associated with the increase of vascular wall stiffness [1]. Referring to the "Deutsche Bluthochdruck Liga" this pathology shows a growing trend in our aging society. In order to find novel pharmacological and probably personalized treatments, we want to present a functional approach to study biomechanical properties of a human aortic vascular model. In this method review we will give an overview of recent studies which were carried out with the CellDrum technology [2] and underline the added value to already existing standard procedures known from the field of physiology. Herein described CellDrum technology is a system to measure functional mechanical properties of cell monolayers and thin tissue constructs in-vitro. Additionally, the CellDrum enables to elucidate the mechanical response of cells to pharmacological drugs, toxins and vasoactive agents. Due to its highly flexible polymer support, cells can also be mechanically stimulated by steady and cyclic biaxial stretching.},
  language  = {en}
}
@article{StreunChavanLameetal.2006,
  author    = {Streun, M. and Chavan, U. and Lame, H. and Parl, C. and M{\"u}ller-Veggian, Mattea and Ziemons, Karl},
  title     = {Treating the Gain Non-Uniformity of Multi Channel PMTs by Channel-Specific Trigger Levels},
  series = {2006 IEEE Nuclear Science Symposium Conference Record, Vol. 2.},
  journal   = {2006 IEEE Nuclear Science Symposium Conference Record, Vol. 2.},
  address   = {San Diego, CA},
  issn      = {1082-3654},
  pages     = {1301 -- 1304},
  year      = {2006},
  language  = {en}
}
@article{EilmannRigling2012,
  author    = {Eilmann, Britta and Rigling, Andreas},
  title     = {Tree-growth analyses to estimate tree species' drought tolerance},
  series = {Tree Physiology},
  volume    = {32},
  journal   = {Tree Physiology},
  number    = {2},
  editor    = {Abrams, Marc},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {0829-318X (Print)},
  doi       = {10.1093/treephys/tps004},
  pages     = {178 -- 187},
  year      = {2012},
  abstract  = {Climate change is challenging forestry management and practices. Among other things, tree species with the ability to cope with more extreme climate conditions have to be identified. However, while environmental factors may severely limit tree growth or even cause tree death, assessing a tree species' potential for surviving future aggravated environmental conditions is rather demanding. The aim of this study was to find a tree-ring-based method suitable for identifying very drought-tolerant species, particularly potential substitute species for Scots pine (Pinus sylvestris L.) in Valais. In this inner-Alpine valley, Scots pine used to be the dominating species for dry forests, but today it suffers from high drought-induced mortality. We investigate the growth response of two native tree species, Scots pine and European larch (Larix decidua Mill.), and two non-native species, black pine (Pinus nigra Arnold) and Douglas fir (Pseudotsuga menziesii Mirb. var. menziesii), to drought. This involved analysing how the radial increment of these species responded to increasing water shortage (abandonment of irrigation) and to increasingly frequent drought years. Black pine and Douglas fir are able to cope with drought better than Scots pine and larch, as they show relatively high radial growth even after irrigation has been stopped and a plastic growth response to drought years. European larch does not seem to be able to cope with these dry conditions as it lacks the ability to recover from drought years. The analysis of trees' short-term response to extreme climate events seems to be the most promising and suitable method for detecting how tolerant a tree species is towards drought. However, combining all the methods used in this study provides a complete picture of how water shortage could limit species.},
  language  = {en}
}
@article{Esch2010,
  author    = {Esch, Thomas},
  title     = {Trends in commercial vehicle powertrains},
  series = {ATZautotechnology},
  volume    = {2010},
  journal   = {ATZautotechnology},
  number    = {10},
  publisher = {Vieweg \& Sohn},
  address   = {Wiesbaden},
  issn      = {2192-886X},
  doi       = {10.1007/BF03247185},
  pages     = {26 -- 31},
  year      = {2010},
  abstract  = {Low emission zones and truck bans, the rising price of diesel and increases in road tolls: all of these factors are putting serious pressure on the transport industry. Commercial vehicle manufacturers and their suppliers are in the process of identifying new solutions to these challenges as part of their efforts to meet the EEV (enhanced environmentally friendly vehicle) limits, which are currently the most robust European exhaust and emissions standards for trucks and buses.},
  language  = {en}
}
@article{BucurLazarescuPopetal.2019,
  author    = {Bucur, Alexandru and Lazarescu, Lucian and Pop, Grigore Marian and Achimas, Gheorghe and Gebhardt, Andreas},
  title     = {Tribological performance of biodegradable lubricants under different surface roughness of tools},
  series = {Academic Journal of Manufacturing Engineering},
  volume    = {17},
  journal   = {Academic Journal of Manufacturing Engineering},
  number    = {1},
  issn      = {1583-7904},
  pages     = {172 -- 178},
  year      = {2019},
  language  = {en}
}
@article{BarbazanHagenbachPaulssenetal.2010,
  author    = {Barbaz{\´a}n, Paula and Hagenbach, Adelheid and Paulßen, Elisabeth and Abram, Ulrich and Carballo, Rosa and Rodriguez-Hermida, Sabina and V{\´a}zquez-L{\´o}pez, Ezequiel M.},
  title     = {Tricarbonyl Rhenium(I) and Technetium(I) Complexes with Hydrazones Derived from 4,5-Diazafluoren-9-one and 1,10-Phenanthroline-5,6-dione},
  series = {European Journal of Inorganic Chemistry},
  journal   = {European Journal of Inorganic Chemistry},
  number    = {29},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1099-0682},
  doi       = {10.1002/ejic.201000522},
  pages     = {4622 -- 4630},
  year      = {2010},
  abstract  = {Tricarbonylrhenium(I) and -technetium(I) halide (halide = Cl and Br) complexes of ligands derived from 4,5-diazafluoren-9-one (df) and 1,10-phenanthroline-5,6-dione (phen) derivatives of benzoic and 2-hydroxybenzoic acid hydrazides have been prepared. The complexes have been characterized by elemental analysis, MS, IR, 1H NMR and absorption and emission UV/Vis spectroscopic methods. The metal centres (ReI and TcI) are coordinated through the nitrogen imine atoms and establish five-membered chelate rings, whereas the hydrazone groups stand uncoordinated. The 1H NMR spectra suggest the same behaviour in solution on the basis of only marginal variations in the chemical shifts of the hydrazine protons.},
  language  = {en}
}
@article{PaulssenNgyugenKahlckeetal.2012,
  author    = {Paulßen, Elisabeth and Ngyugen, Hung Huy and Kahlcke, Nils and Deflon, Victor M. and Abram, Ulrich},
  title     = {Tricarbonyltechnetium(I) and -rhenium(I) complexes with N′-thiocarbamoylpicolylbenzamidines},
  series = {Polyhedron},
  volume    = {40},
  journal   = {Polyhedron},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0277-5387},
  doi       = {10.1016/j.poly.2012.04.008},
  pages     = {153 -- 158},
  year      = {2012},
  abstract  = {N,N-Dialkylamino(thiocarbonyl)-N′-picolylbenzamidines react with (NEt4)2[M(CO)3X3] (M = Re, X = Br; M = Tc, X = Cl) under formation of neutral [M(CO)3L] complexes in high yields. The monoanionic NNS ligands bind in a facial coordination mode and can readily be modified at the (CS)NR1R2 moiety. The complexes [99Tc(CO)3(LPyMor)] and [Re(CO)3(L)] (L = LPyMor, LPyEt) were characterized by X-ray diffraction. Reactions of [99mTc(CO)3(H2O)3]+ with the N′-thiocarbamoylpicolylbenzamidines give the corresponding 99mTc complexes. The ester group in HLPyCOOEt allows linkage between biomolecules and the metal core.},
  language  = {en}
}
@incollection{Helmig2009,
  author    = {Helmig, Ilka},
  title     = {Tristan und Isolde, Samson und Dalila, Capriccio : 3D illustration for posters of Cologne Opera},
  series = {Papercraft [1] : design and art with paper},
  booktitle = {Papercraft [1] : design and art with paper},
  editor    = {Klanten, Robert},
  publisher = {Gestalten Verlag},
  address   = {Berlin},
  isbn      = {978-3-89955-251-5},
  pages     = {202},
  year      = {2009},
  subject      = {Papierkunst},
  language  = {en}
}
@inproceedings{DerschGeyerHerrmannetal.2002,
  author    = {Dersch, J{\"u}rgen and Geyer, Michael and Herrmann, Ulf and Jones, Scott A. and Kelly, Bruce and Kistner, Rainer and Ortmanns, Winfried and Pitz-Paal, Robert and Price, Henry},
  title     = {Trough integration into power plants : a study on the performance and economy of integrated solar combined cycle systems},
  series = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  booktitle = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  editor    = {Steinfeld, Aldo},
  publisher = {Paul Scherrer Inst.},
  address   = {Villingen},
  isbn      = {3-9521409-3-7},
  pages     = {661 -- 671},
  year      = {2002},
  language  = {en}
}
@article{DerschGeyerHerrmannetal.2004,
  author    = {Dersch, J{\"u}rgen and Geyer, Michael and Herrmann, Ulf and Jones, Scott A. and Kelly, Bruce and Kistner, Rainer and Ortmanns, Winfried and Pitz-Paal, Robert and Price, Henry},
  title     = {Trough integration into power plants—a study on the performance and economy of integrated solar combined cycle systems},
  series = {Energy : the international journal},
  volume    = {29},
  journal   = {Energy : the international journal},
  number    = {5-6 (Special Issue SolarPaces)},
  issn      = {0360-5442},
  doi       = {10.1016/S0360-5442(03)00199-3},
  pages     = {947 -- 959},
  year      = {2004},
  language  = {en}
}
@inproceedings{FerreinBharatheeshaSchifferetal.2019,
  author    = {Ferrein, Alexander and Bharatheesha, Mukunda and Schiffer, Stefan and Corbato, Carlos Hernandez},
  title     = {TRROS 2018 : Teaching Robotics with ROS Workshop at ERF 2018; Proceedings of the Workshop on Teaching Robotics with ROS (held at ERF 2018), co-located with European Robotics Forum 2018 (ERF 2018), Tampere, Finland, March 15th, 2018},
  series = {CEUR Workshop Proceedings},
  booktitle = {CEUR Workshop Proceedings},
  number    = {Vol-2329},
  issn      = {1613-0073},
  pages     = {68 Seiten},
  year      = {2019},
  language  = {en}
}
@article{VitusevichFoersterIndlekoferetal.2000,
  author    = {Vitusevich, S. A. and F{\"o}rster, Arnold and Indlekofer, K.-M. and L{\"u}th, H. and Belyaev, A. E. and Glavin, B. A. and Konakova, R. V.},
  title     = {Tunneling Through X-Valley-Related Impurity States in GaAs/AlAs Resonant-Tunneling Diodes},
  series = {Physical Review . B. 61 (2000), H. 16},
  journal   = {Physical Review . B. 61 (2000), H. 16},
  isbn      = {1550-235X},
  pages     = {10898 -- 10904},
  year      = {2000},
  language  = {en}
}
@techreport{Drescher2021,
  type      = {Working Paper},
  author    = {Drescher, Hans Paul},
  title     = {Turbulence - minimum dissipation and maximum macroscopic momentum exchange},
  pages     = {44 Seiten},
  year      = {2021},
  abstract  = {The minimum dissipation requirement of the thermodynamics of irreversible processes is applied to characterize the existence of laminar and non-laminar, and the co-existence of laminar and turbulent flow zones. Local limitations of the different zones and three different forms of transition are defined. For the Couette flow a non-local "corpuscular" flow mechanism explains the logarithmic law-of-the-wall, maximum turbulent dimensions and a value x=0,415 for the v. K{\´a}rm{\´a}n constant. Limitations of the logarithmic law near the wall and in the centre of the experiment are interpreted.},
  language  = {en}
}
@article{Hoettges1990,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {Turbulence and Mixing Mechanics in Compound Open Channel Flow / Arnold, Uwe; H{\"o}ttges, J{\"o}rg; Rouv{\´e}, Gerhard},
  series = {On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten},
  journal   = {On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten},
  publisher = {Delft Hydraulics},
  address   = {Delft},
  year      = {1990},
  language  = {en}
}
@inproceedings{ValeroBungOertel2016,
  author    = {Valero, Daniel and Bung, Daniel Bernhard and Oertel, M.},
  title     = {Turbulent dispersion in bounded horizontal jets : RANS capabilities and physical modeling comparison},
  series = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  booktitle = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  editor    = {Dewals, Benjamin},
  publisher = {CRC Press},
  isbn      = {978-1-138-02977-4},
  doi       = {10.1201/b21902-13},
  pages     = {49 -- 55},
  year      = {2016},
  language  = {en}
}
@article{BungCrookstonValero2020,
  author    = {Bung, Daniel Bernhard and Crookston, Brian M. and Valero, Daniel},
  title     = {Turbulent free-surface monitoring with an RGB-D sensor: the hydraulic jump case},
  series = {Journal of Hydraulic Research},
  journal   = {Journal of Hydraulic Research},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079},
  doi       = {10.1080/00221686.2020.1844810},
  year      = {2020},
  language  = {en}
}
@article{SelmerHermannJessenetal.2005,
  author    = {Selmer, Thorsten and Hermann, Gloria and Jessen, Holly and Gokarn, Ravi R.},
  title     = {Two beta-alanyl-CoA:ammonia lyases in Clostridium propionicum / Herrmann , G. ; Selmer, T. ; Jessen, HJ. ; Gokarn, RR. ; Selifonova, O. ; Gort , SJ. ; , Buckel, W.},
  series = {The FEBS Journal. 272 (2005), H. 3},
  journal   = {The FEBS Journal. 272 (2005), H. 3},
  isbn      = {1742-464X},
  pages     = {813 -- 821},
  year      = {2005},
  language  = {en}
}
@article{NaetherRolkaPoghossianetal.2005,
  author    = {N{\"a}ther, Niko and Rolka, David and Poghossian, Arshak and Koudelka-Hep, M. and Sch{\"o}ning, Michael Josef},
  title     = {Two microcell flow-injection analysis (FIA) platforms for capacitive silicon-based field-effect sensors},
  series = {Electrochimica Acta. 51 (2005), H. 5},
  journal   = {Electrochimica Acta. 51 (2005), H. 5},
  isbn      = {0013-4686},
  doi       = {10.1016/j.electacta.2005.04.066},
  pages     = {924 -- 929},
  year      = {2005},
  language  = {en}
}
@article{HoffschmidtFendPitzPaaletal.2004,
  author    = {Hoffschmidt, Bernhard and Fend, Thomas and Pitz-Paal, Robert and Reutter, Oliver},
  title     = {Two novel high-porosity materials as volumetric receivers for concentrated solar radiation / Thomas Fend ; Robert Pitz-Paal ; Oliver Reutter ... Bernhard Hoffschmidt},
  series = {Solar energy materials \& solar cells. 84 (2004), H. 1},
  journal   = {Solar energy materials \& solar cells. 84 (2004), H. 1},
  isbn      = {0927-0248},
  pages     = {291 -- 304},
  year      = {2004},
  language  = {en}
}
@article{HerrmannKellyPrice2002,
  author    = {Herrmann, Ulf and Kelly, Bruce and Price, Henry},
  title     = {Two Tank Molten Salt Storage for Parabolic Trough Solar Power Plants},
  series = {Energy : the international journal},
  volume    = {29},
  journal   = {Energy : the international journal},
  number    = {5-6 (Special Issue SolarPaces)},
  issn      = {0360-5442},
  doi       = {10.1016/S0360-5442(03)00193-2},
  pages     = {883 -- 893},
  year      = {2002},
  language  = {en}
}
@inproceedings{HerrmannKellyPrice2002,
  author    = {Herrmann, Ulf and Kelly, Bruce and Price, Henry},
  title     = {Two Tank Molten Salt Storage for Parabolic Trough Solar Power Plants},
  series = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  booktitle = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  editor    = {Steinfeld, Aldo},
  publisher = {Paul Scherrer Inst.},
  address   = {Villingen},
  isbn      = {3-9521409-3-7},
  pages     = {517 -- 524},
  year      = {2002},
  language  = {en}
}
@article{SchaeferSchollWaagetal.1993,
  author    = {Sch{\"a}fer, Horst and Scholl, S. and Waag, A. and Hommel, D. (u.a.)},
  title     = {Two-dimensional Shubnikov-de Haas oscillations in modulation-doped CdTe/CdMnTe quantum-well structures},
  series = {Applied Physics Letters. 62 (1993), H. 23},
  journal   = {Applied Physics Letters. 62 (1993), H. 23},
  pages     = {3010 -- 3012},
  year      = {1993},
  language  = {en}
}
@inproceedings{KowalskiBarteltMcElwaine2007,
  author    = {Kowalski, Julia and Bartelt, Perry and McElwaine, J.},
  title     = {Two-phase debris flow modeling},
  series = {Geophysical Research Abstracts},
  booktitle = {Geophysical Research Abstracts},
  year      = {2007},
  language  = {en}
}
@inproceedings{KowalskiMcElwaine2008,
  author    = {Kowalski, Julia and McElwaine, J.},
  title     = {Two-phase debris flow modeling},
  series = {Geophysical Research Abstracts},
  booktitle = {Geophysical Research Abstracts},
  year      = {2008},
  language  = {en}
}
@phdthesis{Kowalski2008,
  author    = {Kowalski, Julia},
  title     = {Two-phase Modeling of Debris Flows},
  publisher = {Mensch und Buch},
  address   = {Berlin},
  isbn      = {978-3-86664-524-0},
  pages     = {148},
  year      = {2008},
  language  = {en}
}
@inproceedings{NakagawaKallweitMichauxetal.2016,
  author    = {Nakagawa, Masaki and Kallweit, Stephan and Michaux, Frank and Hojo, Teppei},
  title     = {Typical Velocity Fields and Vortical Structures around a Formula One Car, based on Experimental Investigations using Particle Image Velocimetry},
  series = {SAE International Journal of Passenger Cars - Mechanical Systems},
  booktitle = {SAE International Journal of Passenger Cars - Mechanical Systems},
  issn      = {1946-4002},
  doi       = {10.4271/2016-01-1611},
  pages     = {18 S.},
  year      = {2016},
  language  = {en}
}
@inproceedings{WalterGligorevicDetertetal.2010,
  author    = {Walter, Michael and Gligorevic, Snjezana and Detert, Thorben and Schnell, Michael},
  title     = {UHF/VHF air-to-air propagation measurements},
  series = {Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain},
  booktitle = {Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain},
  organization    = {European Association on Antennas and Propagation},
  isbn      = {978-1-4244-6431-9 ; 978-84-7653-472-4},
  pages     = {1 -- 5},
  year      = {2010},
  language  = {en}
}
@article{HeuermannSadeghfamBoehm2005,
  author    = {Heuermann, Holger and Sadeghfam, Arash and Boehm, H.},
  title     = {Ultra Compact Multi-Mode Filter with Novel Rat-Race Inductor. Sadeghfam, Arash; Heuermann, Holger; Boehm, H.},
  series = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 2},
  journal   = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 2},
  publisher = {Horizon House Publ},
  address   = {London},
  isbn      = {2-9600551-0-1},
  pages     = {4 pp.},
  year      = {2005},
  language  = {en}
}
@article{SchererJacobiCastilloetal.2009,
  author    = {Scherer, Ulrich W. and Jacobi, M. and Castillo, J. and Foerstel, D. H.},
  title     = {Ultra-low-level measurements of 3H and 14C in wines and champagne / Scherer, U. W. ; Jacobi, M. ; Castillo, J. ; Foerstel, D. H.},
  series = {Radiation effects and defects in solids. 164 (2009), H. 5-6},
  journal   = {Radiation effects and defects in solids. 164 (2009), H. 5-6},
  isbn      = {1042-0150},
  pages     = {382 -- 385},
  year      = {2009},
  language  = {en}
}
@article{FoersterMikulicsWuetal.2006,
  author    = {F{\"o}rster, Arnold and Mikulics, M. and Wu, S. and Marso, M.},
  title     = {Ultrafast and Highly Sensitive Photodetectors With Recessed Electrodes Fabricated on Low-Temperature-Grown GaAs. Mikulics, M.; Wu, S.; Marso, M.; Adam, R.; F{\"o}rster, A.; van der Hart, A.; Kordos, P.; L{\"u}th, H.; Sobolewski, R.},
  series = {IEEE Photonics Technology Letters. 18 (2006), H. 7},
  journal   = {IEEE Photonics Technology Letters. 18 (2006), H. 7},
  pages     = {820 -- 822},
  year      = {2006},
  language  = {en}
}
@article{MikulicsAdamKordosetal.2005,
  author    = {Mikulics, M. and Adam, R. and Kordos, P. and F{\"o}rster, Arnold and L{\"u}th, H. and Wu, S. and Zheng, X. and Sobolewski, R.},
  title     = {Ultrafast low-temperature-grown epitaxial GaAs photodetectors transferred on flexible plastic substrates},
  series = {IEEE photonics technology letters : IEEE PTL. 17 (2005), H. 8},
  journal   = {IEEE photonics technology letters : IEEE PTL. 17 (2005), H. 8},
  isbn      = {1041-1135},
  pages     = {1725 -- 1727},
  year      = {2005},
  language  = {en}
}
@article{FoersterMarsoMikulicsetal.2005,
  author    = {F{\"o}rster, Arnold and Marso, M. and Mikulics, V. V. and Adam, R.},
  title     = {Ultrafast Phenomena in Freestanding LT-GaAs Devices. Marso, M.; Mikulics, V. V.; Adam, R.; Wu, S.; Zheng, X.; Camara, I.; Siebe, N. Y.; F{\"o}rster, A.; G{\"u}sten, R.; Kordos, P.; Sobolewski, R.},
  series = {Acta physica Polonica / A. 107 (2005), H. 1},
  journal   = {Acta physica Polonica / A. 107 (2005), H. 1},
  isbn      = {0587-4246},
  pages     = {109 -- 117},
  year      = {2005},
  language  = {en}
}
@article{Foerster1995,
  author    = {F{\"o}rster, Arnold},
  title     = {Ultrahigh frequency measurements of magnetic penetration length and surface impedance of YBa2Cu3O7-x microstriplines on Si and GaAs substrates . R{\"u}ders, F; Hollricher, O.; Copetti, C. A. ; F{\"o}rster, A. ; Buchal, Ch. ; Prusseit, W. ; Kinder, H.},
  series = {Journal of Applied Physics. 77 (1995), H. 10},
  journal   = {Journal of Applied Physics. 77 (1995), H. 10},
  isbn      = {1089-7550},
  pages     = {5282 -- 5286},
  year      = {1995},
  language  = {en}
}
@article{SeynnesBojsenMollerAlbrachtetal.2015,
  author    = {Seynnes, O. R. and Bojsen-Moller, J. and Albracht, Kirsten and Arndt, A. and Cronin, N. J. and Finni, T. and Magnusson, S. P.},
  title     = {Ultrasound-based testing of tendon mechanical properties: a critical evaluation},
  series = {Journal of Applied Physiology},
  volume    = {118},
  journal   = {Journal of Applied Physiology},
  number    = {2},
  issn      = {8750-7587},
  doi       = {10.1152/japplphysiol.00849.2014},
  pages     = {133 -- 141},
  year      = {2015},
  language  = {en}
}
@inproceedings{KirchhofKraft2004,
  author    = {Kirchhof, M. and Kraft, Bodo},
  title     = {UML-based modeling of architectural knowledge and design},
  year      = {2004},
  abstract  = {IASSE-2004 - 13th International Conference on Intelligent and Adaptive Systems and Software Engineering eds. W. Dosch, N. Debnath, pp. 245-250, ISCA, Cary, NC, 1-3 July 2004, Nice, France We introduce a UML-based model for conceptual design support in civil engineering. Therefore, we identify required extensions to standard UML. Class diagrams are used for elaborating building typespecific knowledge: Object diagrams, implicitly contained in the architect's sketch, are validated against the defined knowledge. To enable the use of industrial, domain-specific tools, we provide an integrated conceptual design extension. The developed tool support is based on graph rewriting. With our approach architects are enabled to deal with semantic objects during early design phase, assisted by incremental consistency checks.},
  subject      = {UML},
  language  = {en}
}
@book{BenknerStepping2002,
  author    = {Benkner, Thorsten and Stepping, Christoph},
  title     = {UMTS - Universal Mobile Telecommunications System},
  publisher = {Schlembach},
  address   = {Weil der Stadt},
  isbn      = {3-935340-07-9},
  pages     = {XVI, 511 S. : graph. Darst.},
  year      = {2002},
  language  = {en}
}
@article{SchubaBusboomHerwonoetal.2002,
  author    = {Schuba, Marko and Busboom, Axel and Herwono, Ian and Zavagli, Guido},
  title     = {Unambiguous Device Identification and Fast Connection Setup in Bluetooth / Busboom, Axel ; Herwono, Ian ; Schuba, Marko ; Zavagli, Guido},
  series = {European wireless 2002 : next generation wireless networks: technologies, protocols, services and applications ; technical sessions: 26 - 28 February 2002, tutorials: 25 February 2002, Centro Affari, Florence, Italy ; proceedings / sponsored by EUREL ... General chair: Luciano Lenzini},
  journal   = {European wireless 2002 : next generation wireless networks: technologies, protocols, services and applications ; technical sessions: 26 - 28 February 2002, tutorials: 25 February 2002, Centro Affari, Florence, Italy ; proceedings / sponsored by EUREL ... General chair: Luciano Lenzini},
  pages     = {1 -- 5},
  year      = {2002},
  language  = {en}
}
@inproceedings{TranStaat2014,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Uncertain multimode failure and limit analysis of shells},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{FellinKingKirschetal.2009,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  booktitle = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  publisher = {CRC Pr.},
  address   = {Boca Raton, Fla. [u.a.]},
  organization    = {International Conference on Structural Safety and Reliability <10, 2009, Osaka>},
  isbn      = {978-0-415-47557-0},
  pages     = {112 -- 114},
  year      = {2009},
  language  = {en}
}
@article{FellinKingKirschetal.2010,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Structural safety},
  volume    = {32},
  journal   = {Structural safety},
  number    = {6},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-4730},
  doi       = {10.1016/j.strusafe.2010.06.001},
  pages     = {402 -- 410},
  year      = {2010},
  abstract  = {This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.},
  language  = {en}
}
@incollection{TranStaat2015,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Uncertainty multimode failure and shakedown analysis of shells},
  series = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  booktitle = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)},
  doi       = {10.1007/978-3-319-12928-0_14},
  pages     = {279 -- 298},
  year      = {2015},
  abstract  = {This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.},
  language  = {en}
}
@article{WittmannGillessenOttoetal.1996,
  author    = {Wittmann, Klaus and Gillessen, F. and Otto, G. and R{\"o}stel, R.},
  title     = {Undercooling and solidification of metallic melts suspended in a non-nucleating matrix: Experiment NUCAL of the German Spacelab Mission D-2},
  series = {Acta Astronautica. 38 (1996), H. 1},
  journal   = {Acta Astronautica. 38 (1996), H. 1},
  isbn      = {0094-5765},
  pages     = {63 -- 68},
  year      = {1996},
  language  = {en}
}
@article{FredebeulKreinVogel2006,
  author    = {Fredebeul-Krein, Markus and Vogel, Erika},
  title     = {Underground Storage Facilities in the German natural gas market: A need for access regulation to ensure competition?},
  series = {Zeitschrift f{\"u}r Energiewirtschaft. 30 (2006), H. 4},
  journal   = {Zeitschrift f{\"u}r Energiewirtschaft. 30 (2006), H. 4},
  isbn      = {0343-5377},
  pages     = {257 -- 270},
  year      = {2006},
  language  = {en}
}
@book{Gebhardt2011,
  author    = {Gebhardt, Andreas},
  title     = {Understanding Additive Manufacturing : Rapid Prototyping - Rapid Tooling - Rapid Manufacturing},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-42552-1},
  pages     = {VIII, 164 S. : farb. Ill.},
  year      = {2011},
  language  = {en}
}
@inproceedings{Eggert2019,
  author    = {Eggert, Mathias},
  title     = {Understanding the acceptance of smart home-based insurances},
  series = {Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm \& Uppsala, Sweden, June 8-14, 2019},
  booktitle = {Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm \& Uppsala, Sweden, June 8-14, 2019},
  isbn      = {978-1-7336325-0-8},
  pages     = {1 -- 15},
  year      = {2019},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@incollection{KrollLudwigs2008,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Unification of Conflict of Laws in Europe. Matrimonial Property Regimes},
  series = {European Challenges in Contemporary Family Law},
  booktitle = {European Challenges in Contemporary Family Law},
  editor    = {Boele-Woelki, Katharina},
  publisher = {Intersentia},
  address   = {Antwerpen},
  isbn      = {978-90-5095-692-5},
  pages     = {379 -- 393},
  year      = {2008},
  language  = {en}
}
@article{ReisselLustfeldHirschfeldetal.2009,
  author    = {Reißel, Martin and Lustfeld, H. and Hirschfeld, J. and Steffen, B.},
  title     = {Uniqueness of magnetotomography for fuel cells and fuel cell stacks / Lustfeld, H. ; Hirschfeld, J. ; Reißel, M ; Steffen, B.},
  series = {Journal of Physics A: Mathematical and Theoretical. 42 (2009), H. 495205},
  journal   = {Journal of Physics A: Mathematical and Theoretical. 42 (2009), H. 495205},
  isbn      = {0022-3689},
  pages     = {9 S.},
  year      = {2009},
  language  = {en}
}
@article{Stulpe2009,
  author    = {Stulpe, Werner},
  title     = {Unitary Operator},
  series = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  journal   = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70622-9},
  pages     = {807 -- 809},
  year      = {2009},
  language  = {en}
}