@inproceedings{BertschMeineckeWolfetal.2019,
  author    = {Bertsch, Timo and Meinecke, Matthias and Wolf, Martin R. and Schmunk, Karina},
  title     = {Smart-Living-Services nur gegen Daten? Process-Mining als M{\"o}glichkeit zur Steigerung der Akzeptanz!},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  pages     = {216 -- 226},
  year      = {2019},
  abstract  = {Seit Jahren etablieren sich Technologien in unserem Alltag, die mit Hilfe von smarten Komponenten neue Services und Vernetzungsm{\"o}glichkeiten schaffen. Dieses Paper beschreibt die Ergebnisse einer Studie, die die Akzeptanz von IoT-gest{\"u}tzten, smarten Services im privaten Umfeld untersucht. Dabei wird eine zentrale Datenverarbeitung mit automatisierter Erstellung smarter Services der dezentralen Datenverarbeitung mit manueller Serviceerstellung in sieben Kategorien gegen{\"u}bergestellt. Die Auswertung der Studie legt die Forschungsfrage nahe, ob das Nutzerverhalten im Kontext Smart Living nicht auch mit einem dezentralen L{\"o}sungsansatz, und somit unabh{\"a}ngig von großen Unternehmen, analysiert werden kann. Hierf{\"u}r wird im zweiten Teil des Papers die Anwendbarkeit von Process-Mining im Bereich Smart Living untersucht und prototypisch getestet.},
  language  = {de}
}
@inproceedings{StaatDuong2016,
  author    = {Staat, Manfred and Duong, Minh Tuan},
  title     = {Smoothed Finite Element Methods for Nonlinear Solid Mechanics Problems: 2D and 3D Case Studies},
  series = {Proceedings of the National Science and Technology Conference on Mechanical - Transportation Engineering (NSCMET 2016), 13th October 2016, Hanoi, Vietnam, Vol.2},
  booktitle = {Proceedings of the National Science and Technology Conference on Mechanical - Transportation Engineering (NSCMET 2016), 13th October 2016, Hanoi, Vietnam, Vol.2},
  pages     = {440 -- 445},
  year      = {2016},
  abstract  = {The Smoothed Finite Element Method (SFEM) is presented as an edge-based and a facebased techniques for 2D and 3D boundary value problems, respectively. SFEMs avoid shortcomings of the standard Finite Element Method (FEM) with lower order elements such as overly stiff behavior, poor stress solution, and locking effects. Based on the idea of averaging spatially the standard strain field of the FEM over so-called smoothing domains SFEM calculates the stiffness matrix for the same number of degrees of freedom (DOFs) as those of the FEM. However, the SFEMs significantly improve accuracy and convergence even for distorted meshes and/or nearly incompressible materials. Numerical results of the SFEMs for a cardiac tissue membrane (thin plate inflation) and an artery (tension of 3D tube) show clearly their advantageous properties in improving accuracy particularly for the distorted meshes and avoiding shear locking effects.},
  language  = {en}
}
@inproceedings{SteuerDankertLeichtScholten2016,
  author    = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen},
  title     = {Social responsibility and innovation - Key competencies for engineers},
  series = {ICERI 2016: 9th International Conference of Education, Research and Innovation: Conference Proceedings : Seville (Spain), 14-16 November},
  booktitle = {ICERI 2016: 9th International Conference of Education, Research and Innovation: Conference Proceedings : Seville (Spain), 14-16 November},
  isbn      = {978-84-617-5895-1},
  issn      = {2340-1095},
  doi       = {10.21125/iceri.2016.0353},
  pages     = {5967 -- 5976},
  year      = {2016},
  abstract  = {Engineers are of particular importance for the societies of tomorrow. The big social challenges society has to cope with in future, can only be mastered, if engineers link the development and innovation process closely with the requirements of people. As a result, in the frame of the innovation process engineers have to design and develop products for diverse users. Therefore, the consideration of diversity in this process is a core competence engineers should have. Implementing the consideration of diverse requirements into product design is also linked to the development of sustainable products and thus leads to social responsible research and development, the core concept formulated by the EU. For this reason, future engineers should be educated to look at the technical perspectives of a problem embedded in the related questions within societies they are developing their artefacts for. As a result, the aim of teaching engineering should be to prepare engineers for these requirements and to draw attention to the diverse needs in a globalized world. To match the competence profiles of future engineers to the global challenges and the resulting social responsibility, RWTH Aachen University, one of the leading technical universities in Germany, has established the bridging professorship "Gender and Diversity in Engineering" (GDI) which educates engineers with an interdisciplinary approach to expand engineering limits. The interdisciplinary teaching concept of the research group pursues an approach which imparts an application oriented Gender and Diversity expertise to future engineers. In the frame of an established teaching concept, which is a result of experiences and expertise of the research group, students gain theoretical knowledge about Gender and Diversity and learn how to transfer their knowledge into their later field of action. In the frame of the conference the institutional approach will be presented as well as the teaching concept which will be introduced by concrete course examples.},
  language  = {en}
}
@inproceedings{GaldiHartungDugelay2019,
  author    = {Galdi, Chiara and Hartung, Frank and Dugelay, Jean-Luc},
  title     = {Socrates: A database of realistic data for source camera recognition on smartphones},
  series = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  booktitle = {Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM},
  isbn      = {978-989-758-351-3},
  doi       = {10.5220/0007403706480655},
  pages     = {648 -- 655},
  year      = {2019},
  language  = {en}
}
@inproceedings{SchreiberHirtbachKraftetal.2013,
  author    = {Schreiber, Marc and Hirtbach, Stefan and Kraft, Bodo and Steinmetzler, Andreas},
  title     = {Software in the city: visual guidance through large scale software projects},
  series = {Software Engineering 2013 : Fachtagung des GI-Fachbereichs Softwaretechnik, 26. Februar-1. M{\"a}rz 2013 in Aachen. (GI-Edition ; 213)},
  booktitle = {Software Engineering 2013 : Fachtagung des GI-Fachbereichs Softwaretechnik, 26. Februar-1. M{\"a}rz 2013 in Aachen. (GI-Edition ; 213)},
  editor    = {Kowalewski, Stefan},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-607-7 ; 978-3-88579-609-1},
  pages     = {213 -- 224},
  year      = {2013},
  language  = {en}
}
@inproceedings{AugensteinKuperjans2001,
  author    = {Augenstein, Eckardt and Kuperjans, Isabel},
  title     = {Softwaregest{\"u}tzte Analyse und Konzeption betrieblicher Energieversorgungsanlagen},
  series = {Fortschrittliche Energiewandlung und -anwendung : Schwerpunkt: dezentrale Energiesysteme ; Tagung Bochum, 13. und 14. M{\"a}rz 2001. - (VDI-Berichte ; 1594)},
  booktitle = {Fortschrittliche Energiewandlung und -anwendung : Schwerpunkt: dezentrale Energiesysteme ; Tagung Bochum, 13. und 14. M{\"a}rz 2001. - (VDI-Berichte ; 1594)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091594-3},
  pages     = {313 -- 322},
  year      = {2001},
  language  = {de}
}
@inproceedings{GrundmannBodenCeriottietal.2017,
  author    = {Grundmann, Jan Thimo and Boden, Ralf and Ceriotti, Matteo and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Lange, Caroline and Lichtenheldt, Roy and Pelivan, Ivanka and Peloni, Alessandro and Riemann, Johannes and Spr{\"o}witz, Tom and Tardivel, Simon},
  title     = {Soil to sail-asteroid landers on near-term sailcraft as an evolution of the GOSSAMER small spacecraft solar sail concept for in-situ characterization},
  series = {5th IAA Planetary Defense Conference},
  booktitle = {5th IAA Planetary Defense Conference},
  pages     = {30 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{MichelRosinButenwegetal.2020,
  author    = {Michel, Philipp and Rosin, Julia and Butenweg, Christoph and Klinkel, Sven},
  title     = {Soil-dependent earthquake spectra in the analysis of liquid-storage-tanks on compliant soil},
  series = {Seismic design of industrial facilities 2020},
  booktitle = {Seismic design of industrial facilities 2020},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-729-0},
  pages     = {245 -- 254},
  year      = {2020},
  abstract  = {A further development of the Added-Mass-Method allows the combined representation of the effects of both soil-structure-interaction and fluid-structure interaction on a liquid-filled-tank in one model. This results in a practical method for describing the dynamic fluid pressure on the tank shell during joint movement. The fluid pressure is calculated on the basis of the tank's eigenform and the earthquake acceleration and represented by additional masses on the shell. The bearing on compliant ground is represented by replacement springs, which are calculated dependent on the local soil composition. The influence of the shear modulus of the compliant soil is clearly visible in the pressure curves and the stress distribution in the shell. The acceleration spectra are also dependent on soil stiffness. According to Eurocode-8 the acceleration spectra are determined for fixed soil-classes, instead of calculating the accelerations for each site in direct dependence on the soil composition. This leads to unrealistic sudden changes in the system's response. Therefore, earthquake spectra are calculated for different soil models in direct dependence of the shear modulus. Thus, both the acceleration spectra and the replacement springs match the soil composition. This enables a reasonable and consistent calculation of the system response for the actual conditions at each site.},
  language  = {en}
}
@inproceedings{SchwarzerBiegerRickingetal.1991,
  author    = {Schwarzer, Klemens and Bieger, W. and Ricking, N. and Bansal, Narenda K.},
  title     = {Solar cooker with a rock bed cum oil storage},
  series = {1991 Solar World Congress : : proceedings of the Biennial Congress of the International Solar Energy Society, Denver, Colorado, USA, 19 - 23 August 1991 / ed. by M. E. Arden. Bd. 3,II},
  booktitle = {1991 Solar World Congress : : proceedings of the Biennial Congress of the International Solar Energy Society, Denver, Colorado, USA, 19 - 23 August 1991 / ed. by M. E. Arden. Bd. 3,II},
  publisher = {Pergamon Pr.},
  address   = {Oxford},
  isbn      = {0-08-041690-x},
  pages     = {3751 -- 3756},
  year      = {1991},
  language  = {en}
}
@inproceedings{HerrmannRheinlaenderLippke1997,
  author    = {Herrmann, Ulf and Rheinl{\"a}nder, J. and Lippke, F.},
  title     = {Solar Fields for Direct Steam Generation in Parabolic Trough Collectors},
  series = {Components, tools, facilities and measurement techniques. - (Solar thermal concentrating technologies : proceedings of the 8th international symposium, October, 6 - 11, 1996, K{\"o}ln, Germany ; Vol. 2)},
  booktitle = {Components, tools, facilities and measurement techniques. - (Solar thermal concentrating technologies : proceedings of the 8th international symposium, October, 6 - 11, 1996, K{\"o}ln, Germany ; Vol. 2)},
  editor    = {Becker, Manfred},
  publisher = {M{\"u}ller},
  address   = {Heidelberg},
  isbn      = {3-7880-7616-X},
  pages     = {815 -- 834},
  year      = {1997},
  language  = {en}
}
@inproceedings{DachwaldKahleWie2006,
  author    = {Dachwald, Bernd and Kahle, Ralph and Wie, Bong},
  title     = {Solar sail Kinetic Energy Impactor (KEI) mission design tradeoffs for impacting and deflecting asteroid 99942 Apophis},
  series = {AIAA/AAS Astrodynamics Specialist Conference and Exhibit},
  booktitle = {AIAA/AAS Astrodynamics Specialist Conference and Exhibit},
  doi       = {10.2514/6.2006-6178},
  pages     = {1 -- 20},
  year      = {2006},
  abstract  = {Near-Earth asteroid 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several so-called gravitational keyholes during its 2029-encounter. Several pre-2029-deflection scenarios to prevent Apophis from doing this have been investigated so far. Because the keyholes are less than 1 km in size, a pre-2029 kinetic impact is clearly the best option because it requires only a small change in Apophis' orbit to nudge it out of a keyhole. A single solar sail Kinetic Energy Impactor (KEI) spacecraft that impacts Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages at about 0.75 AU would be a feasible option to do this. The spacecraft consists of a 160 m x 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. In this paper, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, solar sail Kinetic Energy Impactor (KEI) spacecraft are still a feasible option to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value. In this paper, we elaborate potential pre- and post-2029 KEI impact scenarios for a launch in 2020, and investigate tradeoffs between different mission parameters.},
  language  = {en}
}
@inproceedings{Dachwald2004,
  author    = {Dachwald, Bernd},
  title     = {Solar sail performance requirements for missions to the outer solar system and beyond},
  series = {55th International Astronautical Congress 2004},
  booktitle = {55th International Astronautical Congress 2004},
  doi       = {10.2514/6.IAC-04-S.P.11},
  pages     = {1 -- 9},
  year      = {2004},
  abstract  = {Solar sails enable missions to the outer solar system and beyond, although the solar radiation pressure decreases with the square of solar distance. For such missions, the solar sail may gain a large amount of energy by first making one or more close approaches to the sun. Within this paper, optimal trajectories for solar sail missions to the outer planets and into near interstellar space (200 AU) are presented. Thereby, it is shown that even near/medium-term solar sails with relatively moderate performance allow reasonable transfer times to the boundaries of the solar system.},
  language  = {en}
}
@inproceedings{SeboldtDachwald2003,
  author    = {Seboldt, Wolfgang and Dachwald, Bernd},
  title     = {Solar sails for near-term advanced scientific deep space missions},
  series = {Proceedings of the 8th International Workshop on Combustion and Propulsion},
  booktitle = {Proceedings of the 8th International Workshop on Combustion and Propulsion},
  pages     = {14 Seiten},
  year      = {2003},
  abstract  = {Solar sails are propelled in space by reflecting solar photons off large mirroring surfaces, thereby transforming the momentum of the photons into a propulsive force. This innovative concept for low-thrust space propulsion works without any propellant and thus provides a wide range of opportunities for highenergy low-cost missions. Offering an efficient way of propulsion, solar sailcraft could close a gap in transportation options for highly demanding exploration missions within our solar system and even beyond. On December 17th, 1999, a significant step was made towards the realization of this technology: a lightweight solar sail structure with an area of 20 m × 20 m was successfully deployed on ground in a large facility at the German Aerospace Center (DLR) at Cologne. The deployment from a package of 60 cm × 60 cm × 65 cm with a total mass of less than 35 kg was achieved using four extremely light-weight carbon fiber reinforced plastics (CFRP) booms with a specific mass of 100 g/m. The paper briefly reviews the basic principles of solar sails as well as the technical concept and its realization in the ground demonstration experiment, performed in close cooperation between DLR and ESA. Next possible steps are outlined. They could comprise the in-orbit demonstration of the sail deployment on the upper stage of a low-cost rocket and the verification of the propulsion concept by an autonomous and free flying solar sail in the frame of a scientific mission. It is expected that the present design could be extended to sail sizes of about (40 m)2 up to even (70 m)2 without significant mass penalty. With these areas, the maximum achievable thrust at 1 AU would range between 10 and 40 mN - comparable to some electric thrusters. Such prototype sails with a mass between 50 and 150 kg plus a micro-spacecraft of 50 to 250 kg would have a maximum acceleration in the order of 0.1 mm/s2 at 1 AU, corresponding to a maximum ∆V-capability of about 3 km/s per year. Two near/medium-term mission examples to a near-Earth asteroid (NEA) will be discussed: a rendezvous mission and a sample return mission.},
  language  = {en}
}
@inproceedings{GrundmannBauerBorchersetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Wlademar and Borchers, Kai and Dumont, Etienne and Grimm, Christian D. and Ho, Tra-Mi and Jahnke, Rico and Koch, Aaron D. and Lange, Caroline and Maiwald, Volker and Meß, Jan-Gerd and Mikulz, Eugen and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Sasaki, Kaname and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Toth, Norbert and Ceriotti, Matteo and McInnes, Colin and Peloni, Alessandro and Biele, Jens and Krause, Christian and Dachwald, Bernd and Hercik, David and Lichtenheldt, Roy and Wolff, Friederike and Koncz, Alexander and Pelivan, Ivanka and Schmitz, Nicole and Boden, Ralf and Riemann, Johannes and Seboldt, Wolfgang and Wejmo, Elisabet and Ziach, Christian and Mikschl, Tobias and Montenegro, Sergio and Ruffer, Michael and Cordero, Federico and Tardivel, Simon},
  title     = {Solar sails for planetary defense \& high-energy missions},
  series = {IEEE Aerospace Conference Proceedings},
  booktitle = {IEEE Aerospace Conference Proceedings},
  doi       = {10.1109/AERO.2019.8741900},
  pages     = {1 -- 21},
  year      = {2019},
  abstract  = {20 years after the successful ground deployment test of a (20 m) 2 solar sail at DLR Cologne, and in the light of the upcoming U.S. NEAscout mission, we provide an overview of the progress made since in our mission and hardware design studies as well as the hardware built in the course of our solar sail technology development. We outline the most likely and most efficient routes to develop solar sails for useful missions in science and applications, based on our developed `now-term' and near-term hardware as well as the many practical and managerial lessons learned from the DLR-ESTEC Gossamer Roadmap. Mission types directly applicable to planetary defense include single and Multiple NEA Rendezvous ((M)NR) for precursor, monitoring and follow-up scenarios as well as sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation. Other mission types such as the Displaced L1 (DL1) space weather advance warning and monitoring or Solar Polar Orbiter (SPO) types demonstrate the capability of near-term solar sails to achieve asteroid rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. Some of these mission types such as SPO, (M)NR and RKI include separable payloads. For one-way access to the asteroid surface, nanolanders like MASCOT are an ideal match for solar sails in micro-spacecraft format, i.e. in launch configurations compatible with ESPA and ASAP secondary payload platforms. Larger landers similar to the JAXA-DLR study of a Jupiter Trojan asteroid lander for the OKEANOS mission can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. The high impact velocities and re-try capability achieved by the RKI mission type on a final orbit identical to the target asteroid's but retrograde to its motion enables small spacecraft size impactors to carry sufficient kinetic energy for deflection.},
  language  = {en}
}
@inproceedings{Hoffschmidt2008,
  author    = {Hoffschmidt, Bernhard},
  title     = {Solar tower power plants},
  series = {DME Seminar Desalination and Renewable Energies : June 19 and 20 2008, Solar Institut J{\"u}lich / Deutsche Meerwasserentsalzung e.V.},
  booktitle = {DME Seminar Desalination and Renewable Energies : June 19 and 20 2008, Solar Institut J{\"u}lich / Deutsche Meerwasserentsalzung e.V.},
  publisher = {DME},
  address   = {Duisbrug},
  isbn      = {978-3-86861-017-8},
  pages     = {219 Bl. in getr. Z{\"a}hlung : zahlr. Ill. und graph. Darst., Kt.},
  year      = {2008},
  language  = {en}
}
@inproceedings{DerschGeyerHerrmannetal.2002,
  author    = {Dersch, J{\"u}rgen and Geyer, Michael and Herrmann, Ulf and Jones, Scott A. and Kelly, Bruce and Kistner, Rainer and Ortmanns, Winfried and Pitz-Paal, Robert and Price, Henry},
  title     = {Solar Trough Integration Into Combined Cycle Systems},
  series = {Solar engineering 2002 : proceedings of the International Solar Energy Conference ; presented at the 2002 International Solar Energy Conference, a part of Solar 2002 - Sunrise on the Reliable Energy Economy, June 15 - 20, 2002, Reno, Nevada},
  booktitle = {Solar engineering 2002 : proceedings of the International Solar Energy Conference ; presented at the 2002 International Solar Energy Conference, a part of Solar 2002 - Sunrise on the Reliable Energy Economy, June 15 - 20, 2002, Reno, Nevada},
  editor    = {Pearson, J. Boise},
  publisher = {ASME},
  isbn      = {0-7918-1689-3},
  doi       = {doi:10.1115/SED2002-1072},
  pages     = {351 -- 359},
  year      = {2002},
  language  = {en}
}
@inproceedings{MelissSpaete1996,
  author    = {Meliß, Michael and Sp{\"a}te, Frank},
  title     = {Solar-Campus J{\"u}lich - an interdisciplinary project},
  series = {EuroSun '96 ; 10. Internationales Sonnenforum : proceedings. Bd 3},
  booktitle = {EuroSun '96 ; 10. Internationales Sonnenforum : proceedings. Bd 3},
  publisher = {DGS-Sonnenenergie},
  address   = {M{\"u}nchen},
  pages     = {1281 -- 1285},
  year      = {1996},
  language  = {en}
}
@inproceedings{SchwarzerFaberMelissetal.1993,
  author    = {Schwarzer, Klemens and Faber, Christian and Meliß, Michael and Sp{\"a}te, F.},
  title     = {Solar-Institut J{\"u}lich (SIJ), Fachhochschule Aachen, Division J{\"u}lich Germany},
  series = {Harmony with nature : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 1: Energy policy, environment, education},
  booktitle = {Harmony with nature : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 1: Energy policy, environment, education},
  publisher = {Hungarian Energy Society},
  address   = {Budapest},
  pages     = {349 -- 354},
  year      = {1993},
  language  = {en}
}
@inproceedings{PeloniCeriottiDachwald2015,
  author    = {Peloni, Alessandro and Ceriotti, Matteo and Dachwald, Bernd},
  title     = {Solar-Sailing Trajectory Design for Close-up NEA Observations Mission},
  series = {4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy},
  booktitle = {4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy},
  pages     = {21 S.},
  year      = {2015},
  language  = {de}
}
@inproceedings{Hartz2004,
  author    = {Hartz, Thomas},
  title     = {Solare Brauchwasserversorgung in Siedlungen - zentral oder dezentral?},
  series = {14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management},
  booktitle = {14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management},
  publisher = {OTTI-Energie-Kolleg},
  address   = {Regensburg},
  isbn      = {3-934681-33-6},
  pages     = {331 -- 336},
  year      = {2004},
  language  = {de}
}
@inproceedings{Faber2004,
  author    = {Faber, Christian},
  title     = {Solare Großb{\"a}ckerei in Burkina Faso als Beispiel eines solaren Prozessw{\"a}rmesystems},
  series = {14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management},
  booktitle = {14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management},
  publisher = {OTTI-Energie-Kolleg},
  address   = {Regensburg},
  isbn      = {3-934681-33-6},
  pages     = {500 -- 505},
  year      = {2004},
  language  = {de}
}
@inproceedings{Faber2004,
  author    = {Faber, Christian},
  title     = {Solare Meerwasser-Entsalzungsanlage mit mehrstufiger W{\"a}rmer{\"u}ckgewinnung},
  series = {14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management},
  booktitle = {14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management},
  publisher = {OTTI-Energie-Kolleg},
  address   = {Regensburg},
  isbn      = {3-934681-33-6},
  pages     = {154 -- 161},
  year      = {2004},
  language  = {de}
}
@inproceedings{Anthrakidis2010,
  author    = {Anthrakidis, Anette},
  title     = {Solare-Prozessw{\"a}rme-Standards (Sol-Pro-St)},
  series = {Thermische Solarenergie : 20. Symposium ; 05. bis 07. Mai 2010, Kloster Banz, Bad Staffelstein},
  booktitle = {Thermische Solarenergie : 20. Symposium ; 05. bis 07. Mai 2010, Kloster Banz, Bad Staffelstein},
  publisher = {OTTI},
  address   = {Regensburg},
  isbn      = {978-3-941785-29-8},
  pages     = {182 -- 187},
  year      = {2010},
  language  = {de}
}
@inproceedings{Hoffschmidt2005,
  author    = {Hoffschmidt, Bernhard},
  title     = {Solarer Luftkollektor - Entwicklung und Optimierung von bestehenden Fassadenelementen},
  series = {15. Symposium Thermische Solarenergie : 27. bis 29. April 2005, Kloster Banz, Bad Staffelstein},
  booktitle = {15. Symposium Thermische Solarenergie : 27. bis 29. April 2005, Kloster Banz, Bad Staffelstein},
  publisher = {OTTI-Energie-Kolleg},
  address   = {Regensburg},
  isbn      = {3-934681-39-5},
  pages     = {106 -- 111},
  year      = {2005},
  language  = {de}
}
@inproceedings{KrugRazenSpaeteetal.1998,
  author    = {Krug, Wolfgang and Razen, Manfred and Sp{\"a}te, Frank and Meliß, Michael},
  title     = {Solarpraktikum f{\"u}r Ferieng{\"a}ste},
  series = {Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule K{\"o}ln / 11. Internationales Sonnenforum},
  booktitle = {Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule K{\"o}ln / 11. Internationales Sonnenforum},
  publisher = {Solar Promotion},
  address   = {M{\"u}nchen},
  organization    = {Deutsche Gesellschaft f{\"u}r Sonnenenergie},
  pages     = {1102 -- 1109},
  year      = {1998},
  language  = {de}
}
@inproceedings{Schwarzer2006,
  author    = {Schwarzer, Klemens},
  title     = {Solarthermisches Entsalzungssystem mit W{\"a}rmer{\"u}ckgewinnung - Erste Feldtestergebnisse},
  series = {16. Symposium Thermische Solarenergie : 17. bis 19. Mai 2006, Kloster Banz, Bad Staffelstein},
  booktitle = {16. Symposium Thermische Solarenergie : 17. bis 19. Mai 2006, Kloster Banz, Bad Staffelstein},
  publisher = {Ostbayer. Technologie-Transfer-Inst.},
  address   = {Regensburg},
  isbn      = {3-934681-45-X},
  pages     = {173 -- 178},
  year      = {2006},
  language  = {de}
}
@inproceedings{KaschSchmidtEichleretal.2020,
  author    = {Kasch, Susanne and Schmidt, Thomas and Eichler, Fabian and Thurn, Laura and Jahn, Simon and Bremen, Sebastian},
  title     = {Solution approaches and process concepts for powder bed-based melting of glass},
  series = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  booktitle = {Industrializing Additive Manufacturing. Proceedings of AMPA2020},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-54333-4 (Print)},
  doi       = {10.1007/978-3-030-54334-1_7},
  pages     = {82 -- 95},
  year      = {2020},
  abstract  = {In the study, the process chain of additive manufacturing by means of powder bed fusion will be presented based on the material glass. In order to reliably process components additively, new concepts with different solutions were developed and investigated. Compared to established metallic materials, the properties of glass materials differ significantly. Therefore, the process control was adapted to the material glass in the investigations. With extensive parameter studies based on various glass powders such as borosilicate glass and quartz glass, scientifically proven results on powder bed fusion of glass are presented. Based on the determination of the particle properties with different methods, extensive investigations are made regarding the melting behavior of glass by means of laser beams. Furthermore, the experimental setup was steadily expanded. In addition to the integration of coaxial temperature measurement and regulation, preheating of the building platform is of major importance. This offers the possibility to perform 3D printing at the transformation temperatures of the glass materials. To improve the component's properties, the influence of a subsequent heat treatment was also investigated. The experience gained was incorporated into a new experimental system, which allows a much better exploration of the 3D printing of glass. Currently, studies are being conducted to improve surface texture, building accuracy, and geometrical capabilities using three-dimensional specimen. The contribution shows the development of research in the field of 3D printing of glass, gives an insight into the machine and process engineering as well as an outlook on the possibilities and applications.},
  language  = {en}
}
@inproceedings{Mertens1999,
  author    = {Mertens, Josef},
  title     = {Some important results of the technology programme RaWid},
  series = {New Results in Numerical and Experimental Fluid Mechanics : Contributions to the 11th AG STAB/DGLR Symposium Berlin, Germany 1998. - Vol. 2. - (Notes on Numerical Fluid Mechanics ; 72)},
  booktitle = {New Results in Numerical and Experimental Fluid Mechanics : Contributions to the 11th AG STAB/DGLR Symposium Berlin, Germany 1998. - Vol. 2. - (Notes on Numerical Fluid Mechanics ; 72)},
  editor    = {Nitsche, Wolfgang},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-663-10903-7 (Print)},
  doi       = {10.1007/978-3-663-10901-3_41},
  pages     = {315 -- 322},
  year      = {1999},
  language  = {en}
}
@inproceedings{LoPiparoKernMazzetti2012,
  author    = {Lo Piparo, G. B. and Kern, Alexander and Mazzetti, C.},
  title     = {Some masterpoints about risk due to lightning},
  series = {International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna},
  booktitle = {International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Lightning Protection <2012, Wien>},
  isbn      = {978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)},
  pages     = {1 -- 6},
  year      = {2012},
  language  = {en}
}
@inproceedings{KonstantinidisKowalskiMartinezetal.2015,
  author    = {Konstantinidis, K. and Kowalski, Julia and Martinez, C. F. and Dachwald, Bernd and Ewerhart, D. and F{\"o}rstner, R.},
  title     = {Some necessary technologies for in-situ astrobiology on enceladus},
  series = {Proceedings of the International Astronautical Congress},
  booktitle = {Proceedings of the International Astronautical Congress},
  isbn      = {978-151081893-4},
  pages     = {1354 -- 1372},
  year      = {2015},
  language  = {en}
}
@inproceedings{DigelTemizArtmannNojimaetal.2003,
  author    = {Digel, Ilya and Temiz Artmann, Ayseg{\"u}l and Nojima, H. and Artmann, Gerhard},
  title     = {Some peculiarities of application of cluster ions generated by plasma in respect of indoor air purification :[abstract]},
  year      = {2003},
  abstract  = {Recently, the SHARP Corporation, Japan, has developed the world's first "Plasma Cluster Ions (PCI)" air purification technology using plasma discharge to generate cluster ions. The new plasma cluster device releases positive and negative ions into the air, which are able to decompose and deactivate harmful airborne substances by chemical reactions. Because cluster ions consist of positive and negative ions that normally exist in the natural world, they are completely harmless and safe to humans. The amount of ozone generated by cluster ions is less than 0.01 ppm, which is significantly less than the 0.05-ppm standard for industrial operations and consumer electronics. This amount, thus, has no harming effects whatsoever on the human body. But particular properties and chemical processes in PCI treatment are still under study. It has been shown that PCI in most cases show strongly pronounced irreversible killing effects in respect of airborne microflora due to free-radical induced reactions and can be considered as a potent technology to disinfect both home, medical and industrial appliances.},
  subject      = {Clusterion},
  language  = {en}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {South African robotics entity for a collaboration initiative},
  series = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  booktitle = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  publisher = {IEEE},
  isbn      = {978-1-5090-3335-5},
  doi       = {10.1109/RoboMech.2016.7813144},
  pages     = {1 -- 6},
  year      = {2017},
  language  = {en}
}
@inproceedings{GabrielliMathiesGrossmannetal.2015,
  author    = {Gabrielli, Roland Antonius and Mathies, Johannes and Großmann, Agnes and Herdrich, Georg and Fasoulas, Stefanos and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith},
  series = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan},
  year      = {2015},
  language  = {en}
}
@inproceedings{UibelBlass2008,
  author    = {Uibel, Thomas and Blaß, Hans Joachim},
  title     = {Spaltverhalten von Holz beim Eindrehen von selbstbohrenden Holzschrauben},
  series = {Doktorandenkolloquium Holzbau Forschung und Praxis : Stuttgart, 05./06. M{\"a}rz 2008},
  booktitle = {Doktorandenkolloquium Holzbau Forschung und Praxis : Stuttgart, 05./06. M{\"a}rz 2008},
  editor    = {Kuhlmann, U.},
  publisher = {Univ., Inst. f{\"u}r Konstruktion und Entwurf},
  address   = {Stuttgart},
  pages     = {135 -- 142},
  year      = {2008},
  language  = {de}
}
@inproceedings{GoldbachAment2010,
  author    = {Goldbach, Daniel and Ament, Christoph},
  title     = {Stabilized reversing with vehicle trailer combinations},
  series = {Crossing borders within the ABC : automation, biomedical engineering and computer science; proceedings; 55. IWK Internationales Wissenschaftliches Kolloquium; 13 - 17 September 2010, Ilmenau},
  booktitle = {Crossing borders within the ABC : automation, biomedical engineering and computer science; proceedings; 55. IWK Internationales Wissenschaftliches Kolloquium; 13 - 17 September 2010, Ilmenau},
  editor    = {Scharff, Peter},
  publisher = {Verl. ISLE},
  address   = {Ilmenau},
  organization    = {Technische Universit{\"a}t <Ilmenau> / Fakult{\"a}t f{\"u}r Informatik und Automatisierung},
  isbn      = {978-3-938843-53-6},
  pages     = {352 -- 357},
  year      = {2010},
  language  = {en}
}
@inproceedings{KohlSchmidtsKloeseretal.2021,
  author    = {Kohl, Philipp and Schmidts, Oliver and Kl{\"o}ser, Lars and Werth, Henri and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {STAMP 4 NLP - an agile framework for rapid quality-driven NLP applications development},
  series = {Quality of Information and Communications Technology. QUATIC 2021},
  booktitle = {Quality of Information and Communications Technology. QUATIC 2021},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-85346-4},
  doi       = {10.1007/978-3-030-85347-1_12},
  pages     = {156 -- 166},
  year      = {2021},
  abstract  = {The progress in natural language processing (NLP) research over the last years, offers novel business opportunities for companies, as automated user interaction or improved data analysis. Building sophisticated NLP applications requires dealing with modern machine learning (ML) technologies, which impedes enterprises from establishing successful NLP projects. Our experience in applied NLP research projects shows that the continuous integration of research prototypes in production-like environments with quality assurance builds trust in the software and shows convenience and usefulness regarding the business goal. We introduce STAMP 4 NLP as an iterative and incremental process model for developing NLP applications. With STAMP 4 NLP, we merge software engineering principles with best practices from data science. Instantiating our process model allows efficiently creating prototypes by utilizing templates, conventions, and implementations, enabling developers and data scientists to focus on the business goals. Due to our iterative-incremental approach, businesses can deploy an enhanced version of the prototype to their software environment after every iteration, maximizing potential business value and trust early and avoiding the cost of successful yet never deployed experiments.},
  language  = {en}
}
@inproceedings{Alt2000,
  author    = {Alt, Helmut},
  title     = {Stand der Durchleitungspraxis auf Basis des neuen Energiewirtschaftsgesetzes},
  series = {Energie und Umwelt 2000 : Fachkongreß und Ausstellung mit DBU-Statuskolloquium der Deutschen Bundesstiftung Umwelt: In situ-Bodenreaktor-Technologie, 29. bis 30. M{\"a}rz 2000 in Freiberg, Clemens-Winkler-Bau ; Tagungsband},
  booktitle = {Energie und Umwelt 2000 : Fachkongreß und Ausstellung mit DBU-Statuskolloquium der Deutschen Bundesstiftung Umwelt: In situ-Bodenreaktor-Technologie, 29. bis 30. M{\"a}rz 2000 in Freiberg, Clemens-Winkler-Bau ; Tagungsband},
  organization    = {Technische Universit{\"a}t <Freiberg>},
  pages     = {86 -- 88},
  year      = {2000},
  language  = {de}
}
@inproceedings{SeilerGeorgePfaffetal.2005,
  author    = {Seiler, Friedrich and George, Alfred and Pfaff, Raphael and Srulijes, Julio},
  title     = {Stand der Entwicklung des ISL Dopplerbildverfahrens},
  series = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  booktitle = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  publisher = {Techn. Univ.},
  address   = {Cottbus},
  organization    = {Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik <13, 2005, Cottbus>},
  isbn      = {3-9805613-2-1},
  pages     = {24-1 -- 24-8},
  year      = {2005},
  language  = {de}
}
@inproceedings{ScheibeKern2013,
  author    = {Scheibe, K. and Kern, Alexander},
  title     = {Stand der Normung f{\"u}r {\"U}berspannungsschutzger{\"a}te},
  series = {10. VDE, VBB-Blitzschutztagung : Vortr{\"a}ge der 10. VDE, ABB-Fachtagung vom 24. bis 25. Oktober 2013 in Neu-Ulm. (VDE-Fachbericht ; 70)},
  booktitle = {10. VDE, VBB-Blitzschutztagung : Vortr{\"a}ge der 10. VDE, ABB-Fachtagung vom 24. bis 25. Oktober 2013 in Neu-Ulm. (VDE-Fachbericht ; 70)},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  organization    = {Blitzschutztagung <10, 2013, Neu-Ulm>},
  isbn      = {978-3-8007-3540-2},
  pages     = {23 -- 27},
  year      = {2013},
  language  = {de}
}
@inproceedings{SchwarzerSchwarzer2009,
  author    = {Schwarzer, Klemens and Schwarzer, Tarik},
  title     = {Stand und Entwicklung der Meerwasserentsalzung},
  series = {Neue Herausforderungen und Chancen in der Wasserversorgung : Seminar des Fachgebiets Wasserversorgung und Grundwasserschutz im Rahmen des 1. Darmst{\"a}dter Ingenieurkongresses Bau und Umwelt am 14. und 15.09.2009. Schriftenreihe WAR. 205},
  booktitle = {Neue Herausforderungen und Chancen in der Wasserversorgung : Seminar des Fachgebiets Wasserversorgung und Grundwasserschutz im Rahmen des 1. Darmst{\"a}dter Ingenieurkongresses Bau und Umwelt am 14. und 15.09.2009. Schriftenreihe WAR. 205},
  publisher = {Inst. WAR},
  address   = {Darmstadt},
  isbn      = {978-3-940897-01-5},
  pages     = {99 -- 120},
  year      = {2009},
  language  = {de}
}
@inproceedings{BedburThullMoorkampetal.2019,
  author    = {Bedbur, Christian and Thull, J. and Moorkamp, Wilfried and Uibel, Thomas},
  title     = {Standardbr{\"u}cken f{\"u}r Geh- und Radwege},
  series = {Tagungsband 4. Aachener Holzbautagung 2019: 12. und 13. September an der FH Aachen},
  booktitle = {Tagungsband 4. Aachener Holzbautagung 2019: 12. und 13. September an der FH Aachen},
  publisher = {FH Aachen},
  address   = {Aachen},
  issn      = {2197-4489},
  pages     = {34 -- 45},
  year      = {2019},
  language  = {de}
}
@inproceedings{MaikeLenzWolf2014,
  author    = {Maike, M{\"u}ller and Lenz, Laura and Wolf, Martin R.},
  title     = {Steigerung der Effektivit{\"a}t durch Prozessmodellierungs-Tools - {\"A}nderbarkeit und Transparenz von Prozessen am Beispiel der Business Simulation Apollo 13},
  series = {Informatik 2014},
  booktitle = {Informatik 2014},
  publisher = {Gesellschaft f{\"u}r Informatik e.V.},
  address   = {Bonn},
  isbn      = {978-3-88579-626-8},
  issn      = {1617-5468},
  pages     = {357 -- 369},
  year      = {2014},
  abstract  = {Die Nutzung von Prozessmodellierungsmethoden oder - werkzeugen kann erheblichen Einfluss auf die Effektivit{\"a}t von Prozessen haben. Das gilt insbesondere f{\"u}r Situationen, in denen Personen unter Stress stehen oder unge{\"u}bt sind. In diesen F{\"a}llen geben Prozessmodelle konkrete Empfehlungen, nach denen sich die handelnden Personen richten k{\"o}nnten. In Experimenten mit der Business-Simulation Apollo 13 haben wir den Effekt eines Einsatzes von Prozessmodellierungsmethoden und -werkzeugen untersucht. Bereits bekannte Theorien (z.B. {\"u}ber geeignete Verh{\"a}ltnisse von Kommunikationsinhalten) konnten best{\"a}tigt werden. Dar{\"u}ber hinaus haben wir eine besondere Bedeutung der {\"U}bertragbarkeit von Prozessmodellen in konkrete Handlungen identifiziert.},
  language  = {de}
}
@inproceedings{Dahmann2011,
  author    = {Dahmann, Peter},
  title     = {Stemme S10 VTX als multifunktionales Forschungsflugzeug},
  series = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  isbn      = {978-3-9321-8274-7},
  pages     = {357 -- 364},
  year      = {2011},
  language  = {de}
}
@inproceedings{Gligorevic2013,
  author    = {Gligorevic, Snjezana},
  title     = {Stochastic modeling of non-stationary channels},
  series = {7th European Conference on Antennas and Propagation (EuCAP) : 8 - 12 April 2013, Gothenburg, Sweden},
  booktitle = {7th European Conference on Antennas and Propagation (EuCAP) : 8 - 12 April 2013, Gothenburg, Sweden},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {European Association on Antennas and Propagation},
  isbn      = {978-1-4673-2187-7 ; 978-88-907018-1-8},
  pages     = {1677 -- 1681},
  year      = {2013},
  language  = {en}
}
@inproceedings{StaatTran2022,
  author    = {Staat, Manfred and Tran, Ngoc Trinh},
  title     = {Strain based brittle failure criteria for rocks},
  series = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  booktitle = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  publisher = {Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)},
  address   = {Hanoi},
  isbn      = {978-604-357-084-7},
  pages     = {500 -- 509},
  year      = {2022},
  abstract  = {When confining pressure is low or absent, extensional fractures are typical, with fractures occurring on unloaded planes in rock. These "paradox" fractures can be explained by a phenomenological extension strain failure criterion. In the past, a simple empirical criterion for fracture initiation in brittle rock has been developed. But this criterion makes unrealistic strength predictions in biaxial compression and tension. A new extension strain criterion overcomes this limitation by adding a weighted principal shear component. The weight is chosen, such that the enriched extension strain criterion represents the same failure surface as the Mohr-Coulomb (MC) criterion. Thus, the MC criterion has been derived as an extension strain criterion predicting failure modes, which are unexpected in the understanding of the failure of cohesive-frictional materials. In progressive damage of rock, the most likely fracture direction is orthogonal to the maximum extension strain. The enriched extension strain criterion is proposed as a threshold surface for crack initiation CI and crack damage CD and as a failure surface at peak P. Examples show that the enriched extension strain criterion predicts much lower volumes of damaged rock mass compared to the simple extension strain criterion.},
  language  = {en}
}
@inproceedings{Mueller2004,
  author    = {M{\"u}ller, Karsten},
  title     = {Strategien der Zustandserfassung von Abwasserkan{\"a}len},
  series = {Entwicklungen in der Kanalisationstechnik : schriftliche Fassungen der Vortr{\"a}ge zur 5. Tagung "Entwicklungen in der Kanalisationstechnik" : am 22. und 23. Juni 2004 in K{\"o}ln / MUNLV, Ministerium f{\"u}r Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen, D{\"u}sseldorf ... Tagungsleitung: Max Dohmann ... Aachener Schriften zur Stadtentwaesserung ASS. Bd. 5},
  booktitle = {Entwicklungen in der Kanalisationstechnik : schriftliche Fassungen der Vortr{\"a}ge zur 5. Tagung "Entwicklungen in der Kanalisationstechnik" : am 22. und 23. Juni 2004 in K{\"o}ln / MUNLV, Ministerium f{\"u}r Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen, D{\"u}sseldorf ... Tagungsleitung: Max Dohmann ... Aachener Schriften zur Stadtentwaesserung ASS. Bd. 5},
  publisher = {Institut f{\"u}r Siedlungswasserwirtschaft der RWTH Aachen},
  address   = {Aachen},
  pages     = {1 -- 16},
  year      = {2004},
  language  = {de}
}
@inproceedings{Mueller2007,
  author    = {M{\"u}ller, Karsten},
  title     = {Strategien zur Zustandserfassung von Kanalisationen},
  series = {Integration in der Abwasserentsorgung : Tagungsband Dresden, 04.10.2007 / Dresdner Kolloquium zur Siedlungswasserwirtschaft / Hrsg.: Peter Krebs. Dresdner Berichte. 29},
  booktitle = {Integration in der Abwasserentsorgung : Tagungsband Dresden, 04.10.2007 / Dresdner Kolloquium zur Siedlungswasserwirtschaft / Hrsg.: Peter Krebs. Dresdner Berichte. 29},
  publisher = {Inst. f{\"u}r Siedlungs- und Industriewasserwirtschaft},
  address   = {Dresden},
  pages     = {39 -- 50},
  year      = {2007},
  language  = {de}
}
@inproceedings{KapoorBollerGiljohannetal.2010,
  author    = {Kapoor, Hrshi and Boller, Christian and Giljohann, Sebastian and Braun, Carsten},
  title     = {Strategies for structural health monitoring implementation potential assessment in aircraft operational life extension considerations},
  series = {2nd International Symposium on NDT in Aerospace : November 22-24, 2010 Hamburg, Germany},
  booktitle = {2nd International Symposium on NDT in Aerospace : November 22-24, 2010 Hamburg, Germany},
  publisher = {Dt. Gesellschaft f{\"u}r Zerst{\"o}rungsfreie Pr{\"u}fung},
  address   = {Berlin},
  organization    = {Deutsche Gesellschaft f{\"u}r Zerst{\"o}rungsfreie Pr{\"u}fung},
  isbn      = {978-3-940283-28-3},
  pages     = {9},
  year      = {2010},
  language  = {en}
}
@inproceedings{ThurnGebhardt2018,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Strategy of Education on Materials for Students},
  series = {Conference Proceedings: „New Perspectives in Science Education"},
  booktitle = {Conference Proceedings: „New Perspectives in Science Education"},
  address   = {Florence, Italy},
  isbn      = {978-88-6292-976-9},
  pages     = {156 -- 161},
  year      = {2018},
  language  = {en}
}
@inproceedings{BroennerHoefkenSchuba2016,
  author    = {Broenner, Simon and H{\"o}fken, Hans-Wilhelm and Schuba, Marko},
  title     = {Streamlining extraction and analysis of android RAM images},
  series = {Proceedings of the 2nd international conference on information systems security and privacy},
  booktitle = {Proceedings of the 2nd international conference on information systems security and privacy},
  organization    = {ICISSP International Conference on Information Systems Security and Privacy <2, 2016, Rome, Italy>},
  isbn      = {978-989-758-167-0},
  doi       = {10.5220/0005652802550264},
  pages     = {255 -- 264},
  year      = {2016},
  language  = {en}
}