@article{FrankeBosisNapoli2001, author = {Franke, Thomas and Bosis, R. and Napoli, M.-D.}, title = {{\"U}ber das Internet steuerbarer Gebl{\"a}sepr{\"u}fstand mit einstellbaren Eintrittsleitschaufeln}, series = {Virtuelle Instrumente in der Praxis : Begleitband zum Kongreß VIP 2001 / Rahman Jamal ; Hans Jaschinski}, journal = {Virtuelle Instrumente in der Praxis : Begleitband zum Kongreß VIP 2001 / Rahman Jamal ; Hans Jaschinski}, publisher = {H{\"u}thig Verlag}, address = {Heidelberg [u.a.]}, isbn = {3-7785-2829-7}, pages = {219 -- 225}, year = {2001}, language = {de} } @article{GerhardtKonrathLieb2002, author = {Gerhardt, Hans Joachim and Konrath, Bernd and Lieb, Rolf-Dieter}, title = {Zur Druckbel{\"u}ftung von Sicherheitstreppenr{\"a}umen}, series = {vfdb-Zeitschrift. 51 (2002), H. 3}, journal = {vfdb-Zeitschrift. 51 (2002), H. 3}, isbn = {0042-1804}, pages = {122 -- 128}, year = {2002}, language = {de} } @article{WahleWeber2001, author = {Wahle, Michael and Weber, M.}, title = {Zum Stand von Komponentenmodellen im Rahmen der Fahrzeugsimulation}, year = {2001}, language = {de} } @article{BlomePriester1987, author = {Blome, Hans-Joachim and Priester, W.}, title = {Zum Problem des Urknalls: "Big Bang" oder "Big Bounce"? Teil 2}, series = {Sterne und Weltraum. 26 (1987), H. 3}, journal = {Sterne und Weltraum. 26 (1987), H. 3}, isbn = {0039-1263}, pages = {140 -- 144}, year = {1987}, language = {de} } @article{BlomePriester1987, author = {Blome, Hans-Joachim and Priester, W.}, title = {Zum Problem des Urknalls}, series = {Sterne und Weltraum. 26 (1987), H. 2}, journal = {Sterne und Weltraum. 26 (1987), H. 2}, isbn = {0039-1263}, pages = {83 -- 89}, year = {1987}, language = {de} } @article{OverduinBlomeHoell2007, author = {Overduin, James and Blome, Hans-Joachim and Hoell, Josef}, title = {Wolfgang Priester: from the big bounce to the Lambda-dominated universe}, series = {Naturwissenschaften}, volume = {94}, journal = {Naturwissenschaften}, number = {6}, isbn = {0028-1042}, pages = {417 -- 429}, year = {2007}, language = {en} } @article{Gerhardt1991, author = {Gerhardt, Hans Joachim}, title = {Windlastannahmen f{\"u}r große Industriehallen mit Flachdach}, series = {Die Bautechnik. 68 (1991), H. 3}, journal = {Die Bautechnik. 68 (1991), H. 3}, isbn = {0005-6820}, pages = {93 -- 97}, year = {1991}, language = {de} } @article{GerhardtEbert1991, author = {Gerhardt, Hans Joachim and Ebert, U.}, title = {Windklima und Immission. Vergleich von Messungen vor Ort und Modellmessungen im Windkanal}, series = {Staub, Reinhaltung der Luft. 51 (1991), H. 2}, journal = {Staub, Reinhaltung der Luft. 51 (1991), H. 2}, isbn = {0039-0771}, pages = {57 -- 62}, year = {1991}, language = {de} } @article{GerhardtJanser1995, author = {Gerhardt, Hans Joachim and Janser, F.}, title = {Windbelastung bel{\"u}fteter Fassadensysteme}, series = {Der Bauingenieur. 70 (1995), H. 5}, journal = {Der Bauingenieur. 70 (1995), H. 5}, isbn = {0005-6650}, pages = {193 -- 201}, year = {1995}, language = {de} } @article{HoevelerBauknechtWolfetal.2020, author = {Hoeveler, B. and Bauknecht, Andr{\´e} and Wolf, C. Christian and Janser, Frank}, title = {Wind-Tunnel Study of a Wing-Embedded Lifting Fan Remaining Open in Cruise Flight}, series = {Journal of Aircraft}, volume = {57}, journal = {Journal of Aircraft}, number = {4}, publisher = {AIAA}, address = {Reston, Va.}, issn = {1533-3868}, doi = {10.2514/1.C035422}, year = {2020}, abstract = {It is investigated whether a nonrotating lifting fan remaining uncovered during cruise flight, as opposed to being covered by a shutter system, can be realized with limited additional drag and loss of lift during cruise flight. A wind-tunnel study of a wing-embedded lifting fan has been conducted at the Side Wind Test Facility G{\"o}ttingen of DLR, German Aerospace Center in G{\"o}ttingen using force, pressure, and stereoscopic particle image velocimetry techniques. The study showed that a step on the lower side of the wing in front of the lifting fan duct increases the lift-to-drag ratio of the whole model by up to 25\% for all positive angles of attack. Different sizes and inclinations of the step had limited influence on the surface pressure distribution. The data indicate that these parameters can be optimized to maximize the lift-to-drag ratio. A doubling of the curvature radius of the lifting fan duct inlet lip on the upper side of the wing affected the lift-to-drag ratio by less than 1\%. The lifting fan duct inlet curvature can therefore be optimized to maximize the vertical fan thrust of the rotating lifting fan during hovering without affecting the cruise flight performance with a nonrotating fan.}, language = {en} } @article{GoettenHavermannBraunetal.2020, author = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees}, title = {Wind-tunnel and CFD investigations of UAV landing gears and turrets - Improvements in empirical drag estimation}, series = {Aerospace Science and Technology}, volume = {107}, journal = {Aerospace Science and Technology}, number = {Art. 106306}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1270-9638}, doi = {10.1016/j.ast.2020.106306}, year = {2020}, abstract = {This paper analyzes the drag characteristics of several landing gear and turret configurations that are representative of unmanned aircraft tricycle landing gears and sensor turrets. A variety of these components were constructed via 3D-printing and analyzed in a wind-tunnel measurement campaign. Both turrets and landing gears were attached to a modular fuselage that supported both isolated components and multiple components at a time. Selected cases were numerically investigated with a Reynolds-averaged Navier-Stokes approach that showed good accuracy when compared to wind-tunnel data. The drag of main gear struts could be significantly reduced via streamlining their cross-sectional shape and keeping load carrying capabilities similar. The attachment of wheels introduced interference effects that increased strut drag moderately but significantly increased wheel drag compared to isolated cases. Very similar behavior was identified for front landing gears. The drag of an electro-optical and infrared sensor turret was found to be much higher than compared to available data of a clean hemisphere-cylinder combination. This turret drag was merely influenced by geometrical features like sensor surfaces and the rotational mechanism. The new data of this study is used to develop simple drag estimation recommendations for main and front landing gear struts and wheels as well as sensor turrets. These recommendations take geometrical considerations and interference effects into account.}, language = {en} } @article{Gerhardt2006, author = {Gerhardt, Hans Joachim}, title = {Wind- und Temperatureinfl{\"u}sse bei der Planung von Entrauchungseinrichtungen}, series = {VFDB-Zeitschrift : Forschung, Technik und Management im Brandschutz. 55 (2006), H. 3}, journal = {VFDB-Zeitschrift : Forschung, Technik und Management im Brandschutz. 55 (2006), H. 3}, isbn = {0042-1804}, pages = {115 -- 121}, year = {2006}, language = {de} } @article{Blome1989, author = {Blome, Hans-Joachim}, title = {Wie funktionieren die aktiven Kerne der Galaxien?}, series = {Naturwissenschaften. 76 (1989), H. 7}, journal = {Naturwissenschaften. 76 (1989), H. 7}, isbn = {0028-1042}, pages = {310 -- 317}, year = {1989}, language = {de} } @article{SchmitzSchmittDammann1985, author = {Schmitz, G{\"u}nter and Schmitt, H.J. and Dammann, H.}, title = {Weakly Guiding Semileaky Isolator with a Form-Birefringent Top Layer}, series = {Conference on Lasers and Electro-Optics ; (5, 1985, Baltimore, Md.) ; Conference on Lasers and Electro-Optics (CLEO '85) ; (1985.05.21-24 ; Baltimore, Md.)}, journal = {Conference on Lasers and Electro-Optics ; (5, 1985, Baltimore, Md.) ; Conference on Lasers and Electro-Optics (CLEO '85) ; (1985.05.21-24 ; Baltimore, Md.)}, publisher = {Optical Society of America}, address = {Washington, DC}, pages = {260}, year = {1985}, language = {en} } @article{SchirraBissonnetteBramesfeld2018, author = {Schirra, Julian and Bissonnette, William and Bramesfeld, G{\"o}tz}, title = {Wake-model effects on induced drag prediction of staggered boxwings}, series = {Aerospace}, volume = {5}, journal = {Aerospace}, number = {1}, issn = {2226-4310}, doi = {10.3390/aerospace5010014}, year = {2018}, language = {en} } @article{SchmitzVomHemdtBreitschuhetal.2002, author = {Schmitz, G{\"u}nter and Vom Hemdt, A. and Breitschuh, S. and Graber, S.}, title = {Virtuelle Praktika f{\"u}r die Ingenieurausbildung}, series = {NetWorlds : Leben und Arbeiten in vernetzten Welten ; VDE-Kongress 2002, 21. bis 23. Oktober 2002 in Dresden / Gesamtleitung: J. Ebersp{\"a}cher}, journal = {NetWorlds : Leben und Arbeiten in vernetzten Welten ; VDE-Kongress 2002, 21. bis 23. Oktober 2002 in Dresden / Gesamtleitung: J. Ebersp{\"a}cher}, publisher = {VDE-Verl.}, address = {Berlin [u.a.]}, isbn = {3-8007-2723-4}, pages = {69 -- 74}, year = {2002}, language = {de} } @article{MathiakWillneckerPlescher2005, author = {Mathiak, Gerhard and Willnecker, Rainer and Plescher, Engelbert}, title = {Vibrational effects on diffusion experiments}, series = {Microgravity science and technology : international journal for microgravity research and applications}, volume = {Vol. 15}, journal = {Microgravity science and technology : international journal for microgravity research and applications}, number = {No. 1}, issn = {0938-0108}, pages = {295 -- 300}, year = {2005}, language = {en} } @article{GerhardtSchoenwaldKonrath2007, author = {Gerhardt, Hans Joachim and Sch{\"o}nwald, J. and Konrath, B.}, title = {Verwendung von Leichtgas bei Brandsimulationen - unzul{\"a}ssig oder sinnvoll?}, series = {VFDB-Zeitschrift : Forschung, Technik und Management im Brandschutz. 56 (2007), H. 1}, journal = {VFDB-Zeitschrift : Forschung, Technik und Management im Brandschutz. 56 (2007), H. 1}, isbn = {0042-1804}, pages = {29 -- 31}, year = {2007}, language = {de} } @article{Dachwald2003, author = {Dachwald, Bernd}, title = {Verwendung eines neuronalen Reglers und evolution{\"a}rer Algorithmen zur Berechnung optimaler interplanetarer Sonnenseglerbahnen}, series = {Deutscher Luft- und Raumfahrtkongress 2003 : M{\"u}nchen, 17. bis 20. November 2003, Motto: 100 Jahre Motorflug - 112 Jahre Menschenflug: Visionen gestalten Zukunft / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). [Red.: Peter Brandt (verantwortlich)]. - Bd. 1. - (Jahrbuch ... der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt)}, journal = {Deutscher Luft- und Raumfahrtkongress 2003 : M{\"u}nchen, 17. bis 20. November 2003, Motto: 100 Jahre Motorflug - 112 Jahre Menschenflug: Visionen gestalten Zukunft / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). [Red.: Peter Brandt (verantwortlich)]. - Bd. 1. - (Jahrbuch ... der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt)}, address = {Bonn}, pages = {211 -- 218}, year = {2003}, language = {de} } @article{HeierliPurvesFelberetal.2004, author = {Heierli, Joachim and Purves, Ross S. and Felber, Andreas and Kowalski, Julia}, title = {Verification of nearest-neighbours interpretations in avalanche forecasting}, series = {Annals of Glaciology}, volume = {38}, journal = {Annals of Glaciology}, number = {1}, isbn = {1727-5644}, pages = {84 -- 88}, year = {2004}, abstract = {This paper examines the positive and negative aspects of a range of interpretations of nearest-neighbours models. Measures-oriented and distributionoriented verification methods are applied to categorial, probabilistic and descriptive interpretations of nearest neighbours used operationally in avalanche forecasting in Scotland and Switzerland. The dependence of skill and accuracy measures on base rate is illustrated. The purpose of the forecast and the definition of events are important variables in determining the quality of the forecast. A discussion of the application of different interpretations in operational avalanche forecasting is presented.}, language = {en} } @article{Finger2017, author = {Finger, Felix}, title = {Vergleichende Leistungs- und Nutzenbewertung von VTOL- und CTOL-UAVs}, series = {Luft- und Raumfahrt : informieren, vernetzen, f{\"o}rdern / Hrsg.: Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt}, volume = {38}, journal = {Luft- und Raumfahrt : informieren, vernetzen, f{\"o}rdern / Hrsg.: Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt}, number = {1}, issn = {0173-6264}, pages = {44 -- 47}, year = {2017}, language = {de} } @article{EschSaupeFahletal.1994, author = {Esch, Thomas and Saupe, T. and Fahl, E. and Koch, F.}, title = {Verbrauchseinsparung durch bedarfsgerechten Antrieb der Nebenaggregate}, series = {Motortechnische Zeitschrift. 55 (1994), H. 7/8}, journal = {Motortechnische Zeitschrift. 55 (1994), H. 7/8}, isbn = {0024-8525}, pages = {416 -- 431}, year = {1994}, language = {de} } @article{EschWoltersSalberetal.2001, author = {Esch, Thomas and Wolters, P. and Salber, W. and Geiger, J.}, title = {Variable Ventilsteuerung und Direkteinspritzung - vom Wettbewerb zur Synergie}, series = {Motor und Umwelt 2001, Internal Combustion Engine Versus Fuel Cell - Potential and Limitations as Automotive Power Sources, Verbrennungsmotor versus Brennstoffzelle - Potenziale und Grenzen f{\"u}r den Automobilantrieb, Proc., Graz, AT, 6.-7. Sep, 2001}, journal = {Motor und Umwelt 2001, Internal Combustion Engine Versus Fuel Cell - Potential and Limitations as Automotive Power Sources, Verbrennungsmotor versus Brennstoffzelle - Potenziale und Grenzen f{\"u}r den Automobilantrieb, Proc., Graz, AT, 6.-7. Sep, 2001}, pages = {183 -- 206}, year = {2001}, language = {de} } @article{EschGoebelPischinger1995, author = {Esch, Thomas and G{\"o}bel, T. and Pischinger, M.}, title = {Variable Ventilsteuerung - Luft- und Kraftstoffzumessung bei Ottomotoren mit variabler Ventilsteuerung}, series = {Forschungsberichte Verbrennungskraftmaschinen. 578 (1995)}, journal = {Forschungsberichte Verbrennungskraftmaschinen. 578 (1995)}, pages = {1 -- 42}, year = {1995}, language = {de} } @article{GermanMikuckiWelchetal.2021, author = {German, Laura and Mikucki, Jill A. and Welch, Susan A. and Welch, Kathleen A. and Lutton, Anthony and Dachwald, Bernd and Kowalski, Julia and Heinen, Dirk and Feldmann, Marco and Francke, Gero and Espe, Clemens and Lyons, W. Berry}, title = {Validation of sampling antarctic subglacial hypersaline waters with an electrothermal ice melting probe (IceMole) for environmental analytical geochemistry}, series = {International Journal of Environmental Analytical Chemistry}, volume = {101}, journal = {International Journal of Environmental Analytical Chemistry}, number = {15}, publisher = {Taylor \& Francis}, address = {London}, issn = {0306-7319}, doi = {10.1080/03067319.2019.1704750}, pages = {2654 -- 2667}, year = {2021}, abstract = {Geochemical characterisation of hypersaline waters is difficult as high concentrations of salts hinder the analysis of constituents at low concentrations, such as trace metals, and the collection of samples for trace metal analysis in natural waters can be easily contaminated. This is particularly the case if samples are collected by non-conventional techniques such as those required for aquatic subglacial environments. In this paper we present the first analysis of a subglacial brine from Taylor Valley, (~ 78°S), Antarctica for the trace metals: Ba, Co, Mo, Rb, Sr, V, and U. Samples were collected englacially using an electrothermal melting probe called the IceMole. This probe uses differential heating of a copper head as well as the probe's sidewalls and an ice screw at the melting head to move through glacier ice. Detailed blanks, meltwater, and subglacial brine samples were collected to evaluate the impact of the IceMole and the borehole pump, the melting and collection process, filtration, and storage on the geochemistry of the samples collected by this device. Comparisons between melt water profiles through the glacier ice and blank analysis, with published studies on ice geochemistry, suggest the potential for minor contributions of some species Rb, As, Co, Mn, Ni, NH4+, and NO2-+NO3- from the IceMole. The ability to conduct detailed chemical analyses of subglacial fluids collected with melting probes is critical for the future exploration of the hundreds of deep subglacial lakes in Antarctica.}, language = {en} } @article{BlomePriester1985, author = {Blome, Hans-Joachim and Priester, Wolfgang}, title = {Vacuum energy in cosmic dynamics}, series = {Astrophysics and Space Science. 117 (1985), H. 2}, journal = {Astrophysics and Space Science. 117 (1985), H. 2}, isbn = {0004-640X}, pages = {327 -- 335}, year = {1985}, language = {en} } @article{BlomePriester1984, author = {Blome, Hans-Joachim and Priester, Wolfgang}, title = {Urknall und Evolution des Kosmos. II. Inflation{\"a}r modifizierter Urknall und Eschatologie des Kosmos}, series = {Naturwissenschaften. 71 (1984), H. 10}, journal = {Naturwissenschaften. 71 (1984), H. 10}, isbn = {0028-1042}, pages = {515 -- 527}, year = {1984}, language = {de} } @article{BlomePriester1984, author = {Blome, Hans-Joachim and Priester, Wolfgang}, title = {Urknall und Evolution des Kosmos. I. Einstein-Friedmann-Kosmos und das Neutrino-Problem}, series = {Naturwissenschaften. 71 (1984), H. 9}, journal = {Naturwissenschaften. 71 (1984), H. 9}, isbn = {0028-1042}, pages = {456 -- 467}, year = {1984}, language = {de} } @article{RoethPielenWolffetal.2018, author = {R{\"o}th, Thilo and Pielen, Michael and Wolff, Klaus and L{\"u}diger, Thomas}, title = {Urbane Fahrzeugkonzepte f{\"u}r die Shared Mobility}, series = {Automobiltechnische Zeitschrift - ATZ}, volume = {120}, journal = {Automobiltechnische Zeitschrift - ATZ}, number = {1}, publisher = {Springer Vieweg}, address = {Wiesbaden}, issn = {0001-2785}, doi = {10.1007/s35148-017-0176-8}, pages = {18 -- 23}, year = {2018}, abstract = {Urbane Mobilit{\"a}tskonzepte der Zukunft erfordern neue Unternehmensformen, idealerweise aus Old Economy und New Economy, sowie eine enge Anbindung an die gesellschaftsrelevante Zukunftsforschung. F{\"u}r neue Fahrzeugkonzepte des Carsharing bedeutet dies, dass alle kostenverursachenden Faktoren erfasst und analysiert werden m{\"u}ssen. Die FH Aachen, share2drive und FEV geben einen Ausblick auf die zuk{\"u}nftige Fahrzeugklasse der Personal Public Vehicles als „Rolling Device".}, language = {de} } @article{WittmannGillessenOttoetal.1996, author = {Wittmann, Klaus and Gillessen, F. and Otto, G. and R{\"o}stel, R.}, title = {Undercooling and solidification of metallic melts suspended in a non-nucleating matrix: Experiment NUCAL of the German Spacelab Mission D-2}, series = {Acta Astronautica. 38 (1996), H. 1}, journal = {Acta Astronautica. 38 (1996), H. 1}, isbn = {0094-5765}, pages = {63 -- 68}, year = {1996}, language = {en} } @article{Esch2010, author = {Esch, Thomas}, title = {Trends in der Nutzfahrzeugantriebstechnik}, series = {Motortechnische Zeitschrift (MTZ)}, volume = {71}, journal = {Motortechnische Zeitschrift (MTZ)}, number = {10}, publisher = {Springer Nature}, address = {Basel}, isbn = {0024-8525}, doi = {10.1007/bf03225608}, pages = {652 -- 658}, year = {2010}, language = {de} } @article{Esch2010, author = {Esch, Thomas}, title = {Trends in commercial vehicle powertrains}, series = {ATZautotechnology}, volume = {2010}, journal = {ATZautotechnology}, number = {10}, publisher = {Vieweg \& Sohn}, address = {Wiesbaden}, issn = {2192-886X}, doi = {10.1007/BF03247185}, pages = {26 -- 31}, year = {2010}, abstract = {Low emission zones and truck bans, the rising price of diesel and increases in road tolls: all of these factors are putting serious pressure on the transport industry. Commercial vehicle manufacturers and their suppliers are in the process of identifying new solutions to these challenges as part of their efforts to meet the EEV (enhanced environmentally friendly vehicle) limits, which are currently the most robust European exhaust and emissions standards for trucks and buses.}, language = {en} } @article{FischerKowalskiPudasaini2012, author = {Fischer, Jan-Thomas and Kowalski, Julia and Pudasaini, Shiva P.}, title = {Topographic curvature effects in applied avalanche modelling}, series = {Cold Regions Science and Technology}, volume = {74-75}, journal = {Cold Regions Science and Technology}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1872-7441}, doi = {10.1016/j.coldregions.2012.01.005}, pages = {21 -- 30}, year = {2012}, abstract = {This paper describes the implementation of topographic curvature effects within the RApid Mass MovementS (RAMMS) snow avalanche simulation toolbox. RAMMS is based on a model similar to shallow water equations with a Coulomb friction relation and the velocity dependent Voellmy drag. It is used for snow avalanche risk assessment in Switzerland. The snow avalanche simulation relies on back calculation of observed avalanches. The calibration of the friction parameters depends on characteristics of the avalanche track. The topographic curvature terms are not yet included in the above mentioned classical model. Here, we fundamentally improve this model by mathematically and physically including the topographic curvature effects. By decomposing the velocity dependent friction into a topography dependent term that accounts for a curvature enhancement in the Coulomb friction, and a topography independent contribution similar to the classical Voellmy drag, we construct a general curvature dependent frictional resistance, and thus propose new extended model equations. With three site-specific examples, we compare the apparent frictional resistance of the new approach, which includes topographic curvature effects, to the classical one. Our simulation results demonstrate substantial effects of the curvature on the flow dynamics e.g., the dynamic pressure distribution along the slope. The comparison of resistance coefficients between the two models demonstrates that the physically based extension presents an improvement to the classical approach. Furthermore a practical example highlights its influence on the pressure outline in the run out zone of the avalanche. Snow avalanche dynamics modeling natural terrain curvature centrifugal force friction coefficients.}, language = {en} } @article{WeberArentSteffenetal.2017, author = {Weber, Tobias and Arent, Jan-Christoph and Steffen, Lucas and Balvers, Johannes M. and Duhovic, Miro}, title = {Thermal optimization of composite autoclave molds using the shift factor approach for boundary condition estimation}, series = {Journal of Composite Materials}, volume = {51}, journal = {Journal of Composite Materials}, number = {12}, publisher = {Sage}, address = {London}, issn = {1530-793X}, doi = {10.1177/0021998317699868}, pages = {1753 -- 1767}, year = {2017}, language = {en} } @article{WildSchrezenmeierCzupallaetal.2020, author = {Wild, Dominik and Schrezenmeier, Johannes and Czupalla, Markus and F{\"o}rstner, Markus}, title = {Thermal Characterization of additive manufactured Integral Structures for Phase Change Applications}, series = {2020 International Conference on Environmental Systems}, journal = {2020 International Conference on Environmental Systems}, publisher = {Texas Tech University}, year = {2020}, abstract = {"Infused Thermal Solutions" (ITS) introduces a method for passive thermal control to stabilize structural components thermally without active heating and cooling systems, by using phase change material (PCM) in combination with lattice - both embedded into an additive manufactured integral structure. The technology is currently under development. This paper presents the results of the thermal property measurements performed on additive manufactured ITS breadboards. Within the breadboard campaigns key characteristics of the additive manufactured specimens were derived: Mechanical parameters: specimen impermeability, minimum wall thickness, lattice structure, subsequent heat treatment. Thermal properties: thermo-optical surface properties of the additive manufactured raw material, thermal conductivity and specific heat capacity measurements. As a conclusion the paper introduces an overview of potential ITS hardware applications, expected to increase the thermal performance.}, language = {en} } @article{WittmannPadeken1993, author = {Wittmann, Klaus and Padeken, D.}, title = {The User Center for Microgravity MUSC - Support for space experiments}, series = {DLR-Nachrichten. 70 (1993)}, journal = {DLR-Nachrichten. 70 (1993)}, isbn = {0937-0420}, pages = {19 -- 24}, year = {1993}, language = {en} } @article{Blome1994, author = {Blome, Hans-Joachim}, title = {The scale of the universe: a unit of length}, series = {Comments on astrophysics. 17 (1994)}, journal = {Comments on astrophysics. 17 (1994)}, isbn = {0146-2970}, pages = {327 -- 335}, year = {1994}, language = {en} } @article{WittmannBibringRosenbaueretal.2007, author = {Wittmann, Klaus and Bibring, J.-P. and Rosenbauer, H. and Boehnhardt, H.}, title = {The Rosetta Lander ("Philae") Investigations / Bibring, J.-P. ; Rosenbauer, H. ; Boehnhardt, H. ; [...] Wittmann, K.}, series = {Space Science Reviews. 128 (2007), H. 1-4}, journal = {Space Science Reviews. 128 (2007), H. 1-4}, isbn = {0038-6308}, pages = {205 -- 220}, year = {2007}, language = {en} } @article{BlomeWilson2005, author = {Blome, Hans-Joachim and Wilson, Thomas L.}, title = {The quantum temperature of accelerating cosmological models of an entangled Universe}, series = {Advances in Space Research. 35 (2005), H. 1}, journal = {Advances in Space Research. 35 (2005), H. 1}, isbn = {0273-1177}, pages = {111 -- 115}, year = {2005}, language = {en} } @article{BlomePriester1987, author = {Blome, Hans-Joachim and Priester, Wolfgang}, title = {The problem of the primeval explosion: 'Big bang' or 'big bounce'? I}, series = {Sterne und Weltraum. 26 (1987)}, journal = {Sterne und Weltraum. 26 (1987)}, isbn = {0039-1263}, pages = {83 -- 89}, year = {1987}, language = {en} } @article{BlomeKosbow2005, author = {Blome, Hans-Joachim and Kosbow, Michael}, title = {The Pioneer Anomaly in the context of non-Newtonian Gravity}, series = {International Astronautical Congress : final papers : October 17-21, 2005, Fukuoka, Japan}, journal = {International Astronautical Congress : final papers : October 17-21, 2005, Fukuoka, Japan}, publisher = {International Astronautical Federation}, address = {Paris}, pages = {20 -- 20}, year = {2005}, language = {en} } @article{WilsonBlome2009, author = {Wilson, T. L. and Blome, Hans-Joachim}, title = {The Pioneer anomaly and a rotating G{\"o}del universe}, series = {Advances in Space Research}, volume = {44}, journal = {Advances in Space Research}, number = {11}, isbn = {0273-1177}, pages = {1345 -- 1353}, year = {2009}, language = {en} } @article{WittmannSchmidtPadekenetal.1988, author = {Wittmann, Klaus and Schmidt, H. P. and Padeken, D. and Hildmann, B.}, title = {The Microgravity User Support Centre (MUSC)}, series = {ESA SP. 277 (1988)}, journal = {ESA SP. 277 (1988)}, isbn = {0379-6566}, pages = {525}, year = {1988}, language = {en} } @article{Wittmann1993, author = {Wittmann, Klaus}, title = {The microgravity User Support Centre}, series = {Space Technology - Industrial and Commercial Applications. 13 (1993), H. 2}, journal = {Space Technology - Industrial and Commercial Applications. 13 (1993), H. 2}, isbn = {0892-9270}, pages = {121 -- 124}, year = {1993}, language = {en} } @article{LyonsMikuckiGermanetal.2019, author = {Lyons, W. Berry and Mikucki, Jill A. and German, Laura A. and Welch, Kathleen A. and Welch, Susan A. and Gardener, Christopher B. and Tulaczyk, Slawek M. and Pettit, Erin C. and Kowalski, Julia and Dachwald, Bernd}, title = {The Geochemistry of Englacial Brine from Taylor Glacier, Antarctica}, series = {Journal of Geophysical Research: Biogeosciences}, journal = {Journal of Geophysical Research: Biogeosciences}, publisher = {Wiley}, address = {Hoboken}, issn = {2169-8961}, doi = {10.1029/2018JG004411}, year = {2019}, language = {en} } @article{BlomeWilson2004, author = {Blome, Hans-Joachim and Wilson, Thomas L.}, title = {The entangled Universe}, series = {Relativistic Astrophysics and Cosmology, Proceedings of the 13th Course of the International School of Cosmic Ray Astrophysics, held in Erice, Italy, 2-14 June 2002 / edited by Maurice M. Shapiro ... [et al.]}, journal = {Relativistic Astrophysics and Cosmology, Proceedings of the 13th Course of the International School of Cosmic Ray Astrophysics, held in Erice, Italy, 2-14 June 2002 / edited by Maurice M. Shapiro ... [et al.]}, publisher = {World Scientific Publishing}, address = {New Jersey, NJ}, isbn = {981-238-727-7}, pages = {23 -- 38}, year = {2004}, language = {en} } @article{CzupallaHorneckBlome2005, author = {Czupalla, Markus and Horneck, G. and Blome, Hans-Joachim}, title = {The conceptual design of a hybrid life support system based on the evaluation and comparison of terrestrial testbeds}, series = {Advances in Space Research}, volume = {35}, journal = {Advances in Space Research}, number = {9}, isbn = {0273-1177}, pages = {1609 -- 1620}, year = {2005}, language = {en} } @article{Gerhardt2005, author = {Gerhardt, Hans Joachim}, title = {Teures Bauen durch starre Genehmigungspraxis}, series = {Der Bausachverst{\"a}ndige : Zeitschrift f{\"u}r Bausch{\"a}den, Grundst{\"u}ckswert und gutachterliche T{\"a}tigkeit. 1 (2005), H. 5}, journal = {Der Bausachverst{\"a}ndige : Zeitschrift f{\"u}r Bausch{\"a}den, Grundst{\"u}ckswert und gutachterliche T{\"a}tigkeit. 1 (2005), H. 5}, isbn = {1614-6123}, pages = {44 -- 45}, year = {2005}, language = {de} } @article{RobinsonRoennaFunke2007, author = {Robinson, A. E. and R{\"o}nna, Uwe and Funke, Harald}, title = {Testing of a 10 kW diffusive micro-mix combustor for hydrogen-fuelled micro-scale gas turbines}, series = {International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications <7, 2007, Freiburg, Breisgau> ; PowerMEMS ; 7}, journal = {International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications <7, 2007, Freiburg, Breisgau> ; PowerMEMS ; 7}, pages = {225 -- 228}, year = {2007}, language = {en} } @article{BecretGrossenTrillaetal.2007, author = {B{\´e}cret, P. and Grossen, J. and Trilla, J. and Robinson, A. and Bosschaerts, W. and Funke, Harald and Hendrick, P.}, title = {Testing and numerical study of a 10 kW hydrogen micro combustor}, series = {International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications <7, 2007, Freiburg, Breisgau> ; PowerMEMS ; 7}, journal = {International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications <7, 2007, Freiburg, Breisgau> ; PowerMEMS ; 7}, pages = {367 -- 370}, year = {2007}, language = {en} }