@inproceedings{SchreiberBarkschatKraft2014,
  author    = {Schreiber, Marc and Barkschat, Kai and Kraft, Bodo},
  title     = {Using Continuous Integration to organize and monitor the annotation process of domain specific corpora},
  series = {5th International Conference on Information and Communication Systems (ICICS) : 1-3 April 2014, Irbid, Jordanien},
  booktitle = {5th International Conference on Information and Communication Systems (ICICS) : 1-3 April 2014, Irbid, Jordanien},
  organization    = {International Conference on Information and Communication Systems <5, 2014, Irbid, Jordanien>},
  isbn      = {978-1-4799-3022-7},
  doi       = {10.1109/IACS.2014.6841958},
  pages     = {1 -- 6},
  year      = {2014},
  language  = {en}
}
@article{BohrnStuetzFleischeretal.2013,
  author    = {Bohrn, Ulrich and St{\"u}tz, Evamaria and Fleischer, Maximilian and Sch{\"o}ning, Michael Josef and Wagner, Patrick},
  title     = {Using a cell-based gas biosensor for investigation of adverse effects of acetone vapors in vitro},
  series = {Biosensors and Bioelectronics. 40 (2013), H. 1},
  journal   = {Biosensors and Bioelectronics. 40 (2013), H. 1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0956-5663},
  pages     = {393 -- 400},
  year      = {2013},
  language  = {en}
}
@article{GarhoferBekBoehmetal.2010,
  author    = {Garhofer, Gerhard and Bek, Toke and Boehm, Andreas G. and Gherghel, Doina and Grundwald, Juan and Jeppesen, Peter and Kergoat, H{\´e}l{\`e}ne and Kotliar, Konstantin and Lanzl, Ines and Lovasik, John V. and Nagel, Edgar and Vilser, Walthard and Orgul, Selim and Schmetterer, Leopold},
  title     = {Use of the retinal vessel analyzer in ocular blood flow research},
  series = {Acta Ophthalmol},
  volume    = {88},
  journal   = {Acta Ophthalmol},
  number    = {7},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1755-3768},
  doi       = {10.1111/j.1755-3768.2009.01587.x},
  pages     = {717 -- 722},
  year      = {2010},
  abstract  = {The present article describes a standard instrument for the continuous online determination of retinal vessel diameters, the commercially available retinal vessel analyzer. This report is intended to provide informed guidelines for measuring ocular blood flow with this system. The report describes the principles underlying the method and the instruments currently available, and discusses clinical protocol and the specific parameters measured by the system. Unresolved questions and the possible limitations of the technique are also discussed.},
  language  = {en}
}
@article{ScheerCamposOrtega1999,
  author    = {Scheer, Nico and Campos-Ortega, Jos{\´e} A.},
  title     = {Use of the Gal4-UAS technique for targeted gene expression in the zebrafish},
  series = {Mechanism of Development},
  volume    = {80},
  journal   = {Mechanism of Development},
  number    = {2},
  issn      = {0925-4773},
  doi       = {10.1016/S0925-4773(98)00209-3},
  pages     = {153 -- 158},
  year      = {1999},
  language  = {en}
}
@article{SiqueiraMakiPaulovichetal.2010,
  author    = {Siqueira, Jose R. and Maki, Rafael M. and Paulovich, Fernando V. and Werner, Frederik and Poghossian, Arshak and Oliveira, Maria C. F. de and Zucolotto, Valtencir and Oliveira, Osvaldo N. Jr. and Sch{\"o}ning, Michael Josef},
  title     = {Use of Information Visualization Methods Eliminating Cross Talk in Multiple Sensing Units Investigated for a Light-Addressable Potentiometric Sensor},
  series = {Analytical Chemistry (2010)},
  journal   = {Analytical Chemistry (2010)},
  isbn      = {0003-2700},
  pages     = {61 -- 65},
  year      = {2010},
  language  = {en}
}
@article{AkimbekovZhubanovaMansurovetal.2010,
  author    = {Akimbekov, Nuraly S. and Zhubanova, A. A. and Mansurov, Z. A. and Digel, Ilya and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Use of Carbonized Rise Shell for the local treatment of wounds},
  series = {Eurasian ChemTech Journal},
  volume    = {12},
  journal   = {Eurasian ChemTech Journal},
  number    = {2},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  issn      = {2522-4867},
  doi       = {10.18321/ectj35},
  pages     = {133 -- 138},
  year      = {2010},
  abstract  = {On the model of musculocutaneous wound in rats, the effect of applicative sorption by carbonized rise shell (CRS) on the healing of festering wound was studied. It has been shown, that cytological changes end with rapid scar formation. The use of CRS at the period of severe purulent wound contributes to its favorable course, prevents the development of complications of the animals from sepsis.},
  language  = {en}
}
@incollection{ZhubanovaMansurovDigel2020,
  author    = {Zhubanova, Azhar A. and Mansurov, Zulkhair A. and Digel, Ilya},
  title     = {Use of Advanced Nanomaterials for Bioremediation of Contaminated Ecosystems},
  series = {Carbon Nanomaterials in Biomedicine and the Environment},
  booktitle = {Carbon Nanomaterials in Biomedicine and the Environment},
  publisher = {Jenny Stanford Publishing},
  address   = {Singapore},
  isbn      = {978-981-4800-27-3},
  doi       = {10.1201/9780429428647-18},
  pages     = {353 -- 378},
  year      = {2020},
  abstract  = {This chapter shows that nanomaterials obtained by high-temperature carbonization of inexpensive plant raw material such as rice husk, grape seeds, and walnut shells can serve as a basis for the production of highly efficient microbial drugs, biodestructors, biosorbents, and biocatalysts, which are promising for the remediation of the ecosystem contaminated with heavy and radioactive metals, oil and oil products. A strong interest in engineering zymology is dictated by the necessity to address the issues of monitoring enzymatic processes, treatment, and diagnosis of a number of common human diseases, environmental pollution, quality control of pharmaceuticals and food. Nanomaterials obtained by high-temperature carbonization of cheap plant raw material such as-rice husks, grape seeds and walnut shells, can serve as a basis for creating of highly effective microbial preparations-biodestructors, biosorbents and biocatalysts, which are promising for the use of contaminated ecosystems, and for restoration of human intestine microecology.},
  language  = {en}
}
@misc{VarrialeKukaTippkoetteretal.2022,
  author    = {Varriale, Ludovica and Kuka, Katrin and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Use of a green biomass in a biorefinery platform},
  series = {Chemie Ingenieur Technik},
  volume    = {94},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.202255095},
  pages     = {1299},
  year      = {2022},
  abstract  = {The emerging environmental issues due to the use of fossil resources are encouraging the exploration of new renewable resources. Biomasses are attracting more interest due to the low environmental impacts, low costs, and high availability on earth. In this scenario, green biorefineries are a promising platform in which green biomasses are used as feedstock. Grasses are mainly composed of cellulose and hemicellulose, and lignin is available in a small amount. In this work, a perennial ryegrass was used as feedstock to develop a green bio-refinery platform. Firstly, the grass was mechanically pretreated, thus obtaining a press juice and a press cake fraction. The press juice has high nutritional values and can be employed as part of fermentation media. The press cake can be employed as a substrate either in enzymatic hydrolysis or in solid-state fermentation. The overall aim of this work was to demonstrate different applications of both the liquid and the solid fractions. For this purpose, the filamentous fungus A. niger and the yeast Y. lipolythica were selected for their ability to produce citric acid. Finally, the possibility was assessed to use the press juice as part of fermentation media to cultivate S. cerevisiae and lactic acid bacteria for ethanol and lactic acid fermentation.},
  language  = {en}
}
@article{SchererBaltenspergerAmmannetal.1993,
  author    = {Scherer, Ulrich W. and Baltensperger, Urs and Ammann, Markus and Bochert, Ulrich K.},
  title     = {Use of 13N for Studies of the Selective Reduction of NO by NH3 over Vanadia/Titania Catalyst at Very Low Reactant Concentrations / Urs Baltensperger, Markus Ammann, Ulrich K. Bochert, Bernd Eichler, Heinz W. G{\"a}ggeler, Dieter T. Jost, Joseph A. Kovacs, An},
  series = {Journal of Physical Chemistry. 97 (1993)},
  journal   = {Journal of Physical Chemistry. 97 (1993)},
  isbn      = {0022-3654},
  pages     = {12325 -- 12330},
  year      = {1993},
  language  = {en}
}
@inproceedings{BungSunMeirelesetal.2012,
  author    = {Bung, Daniel Bernhard and Sun, Q. and Meireles, I. and Matos, J. and Viseu, T.},
  title     = {USBR type III stilling basin performance for steep stepped spillways},
  series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  organization    = {International Symposium on Hydraulic Structures <4, 2012, Porto>},
  isbn      = {978-989-8509-01-7},
  pages     = {Elektronisch publiziert},
  year      = {2012},
  language  = {en}
}
@article{HaselgruberMautnerThiele2010,
  author    = {Haselgruber, Nikolaus and Mautner, Karin and Thiele, Jan},
  title     = {Usage Space Analysis for Reliability Testing},
  series = {Quality and Reliability Engineering International},
  volume    = {26},
  journal   = {Quality and Reliability Engineering International},
  number    = {8},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1099-1638},
  doi       = {10.1002/qre.1155},
  pages     = {877 -- 885},
  year      = {2010},
  abstract  = {During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.},
  language  = {en}
}
@inproceedings{UlmerBraunChengetal.2022,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Usage of digital twins for gamification applications in manufacturing},
  series = {Procedia CIRP Leading manufacturing systems transformation - Proceedings of the 55th CIRP Conference on Manufacturing Systems 2022},
  volume    = {107},
  booktitle = {Procedia CIRP Leading manufacturing systems transformation - Proceedings of the 55th CIRP Conference on Manufacturing Systems 2022},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2022.05.044},
  pages     = {675 -- 680},
  year      = {2022},
  abstract  = {Gamification applications are on the rise in the manufacturing sector to customize working scenarios, offer user-specific feedback, and provide personalized learning offerings. Commonly, different sensors are integrated into work environments to track workers' actions. Game elements are selected according to the work task and users' preferences. However, implementing gamified workplaces remains challenging as different data sources must be established, evaluated, and connected. Developers often require information from several areas of the companies to offer meaningful gamification strategies for their employees. Moreover, work environments and the associated support systems are usually not flexible enough to adapt to personal needs. Digital twins are one primary possibility to create a uniform data approach that can provide semantic information to gamification applications. Frequently, several digital twins have to interact with each other to provide information about the workplace, the manufacturing process, and the knowledge of the employees. This research aims to create an overview of existing digital twin approaches for digital support systems and presents a concept to use digital twins for gamified support and training systems. The concept is based upon the Reference Architecture Industry 4.0 (RAMI 4.0) and includes information about the whole life cycle of the assets. It is applied to an existing gamified training system and evaluated in the Industry 4.0 model factory by an example of a handle mounting.},
  language  = {en}
}
@article{DigelAkimbekovTuralievaetal.2013,
  author    = {Digel, Ilya and Akimbekov, Nuraly S. and Turalieva, M. and Mansurov, Z. and Temiz Artmann, Ayseg{\"u}l and Eshibaev, A. and Zhubanova, A.},
  title     = {Usage of Carbonized Plant Wastes for Purification of Aqueous Solutions},
  series = {Journal of Industrial Technology and Engineering},
  volume    = {2},
  journal   = {Journal of Industrial Technology and Engineering},
  number    = {07},
  pages     = {47 -- 54},
  year      = {2013},
  language  = {en}
}
@inproceedings{FuchsRitzStrauch2012,
  author    = {Fuchs, Britta and Ritz, Thomas and Strauch, Jakob},
  title     = {Usability of mobile applications : dissemination of usability engineering in small and medium enterprises},
  series = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]},
  booktitle = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]},
  editor    = {Obaidat, Mohammad S.},
  publisher = {SciTePress},
  address   = {[Lissabon]},
  isbn      = {978-989-8565-23-5},
  pages     = {272 -- 277},
  year      = {2012},
  language  = {en}
}
@inproceedings{FuchsRitz2014,
  author    = {Fuchs, Britta and Ritz, Thomas},
  title     = {Usability for Blended Shopping - Solving Major Flaws by Applying Usability Engineering and Proven Integration Technologies},
  series = {Proceedings of the 11th International Conference on e-Business, ICE-B 2014, Vienna, Austria},
  booktitle = {Proceedings of the 11th International Conference on e-Business, ICE-B 2014, Vienna, Austria},
  isbn      = {978-989-758-043-7},
  doi       = {10.5220/0005113502160223},
  pages     = {216 -- 223},
  year      = {2014},
  language  = {en}
}
@article{FoltzSchneiderWolfetal.2008,
  author    = {Foltz, Christian and Schneider, Nicole and Wolf, Martin and Kausch, Bernhard and Schlick, Christopher and Luczak, Holger},
  title     = {Usability engineering},
  series = {Collaborative and distributed chemical engineering : from understanding to substantial design process support; results of the IMPROVE Project. - (Lecture notes in computer science ; 4970)},
  journal   = {Collaborative and distributed chemical engineering : from understanding to substantial design process support; results of the IMPROVE Project. - (Lecture notes in computer science ; 4970)},
  editor    = {Nagl, Manfred},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70552-9},
  doi       = {10.1007/978-3-540-70552-9_21},
  pages     = {527 -- 554},
  year      = {2008},
  language  = {en}
}
@phdthesis{Seifarth2015,
  author    = {Seifarth, Volker},
  title     = {Ureteral tissue engineering : development of a bioreactor system and subsequent characterization of the generated biohybrids},
  publisher = {Universit{\"a}tsbibliothek Duisburg-Essen},
  address   = {Duisburg ; Essen},
  year      = {2015},
  language  = {en}
}
@incollection{SrivastavaKnolleHoyleretal.2015,
  author    = {Srivastava, Alok and Knolle, Friedhart and Hoyler, Friedrich and Scherer, Ulrich W. and Schnug, Ewald},
  title     = {Uranium Toxicity in the State of Punjab in North-Western India},
  series = {Management of Natural Resources in a Changing Environment},
  booktitle = {Management of Natural Resources in a Changing Environment},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12559-6},
  doi       = {10.1007/978-3-319-12559-6_21},
  pages     = {271 -- 275},
  year      = {2015},
  abstract  = {Lately there has been an increasing concern about uranium toxicity in some districts of Punjab State located in the North Western part of India after the publication of a report (Blaurock-Busch et al. 2010) which showed that the concentration of uranium in hair and urine of children suffering from physical deformities, neurological and mental disorder from Malwa region (Fig. 1) of Punjab State was manifold higher than the reference ranges. A train which connects the affected region with the nearby city of Bikaner which has a Cancer Hospital has been nicknamed as Cancer Express due to the frenzy generated on account of uranium related toxicity.},
  language  = {en}
}
@article{TranKreissigVuetal.2008,
  author    = {Tran, Thanh Ngoc and Kreißig, R. and Vu, Duc Khoi and Staat, Manfred},
  title     = {Upper bound limit and shakedown analysis of shells using the exact Ilyushin yield surface},
  series = {Computer \& Structures. 86 (2008)},
  journal   = {Computer \& Structures. 86 (2008)},
  isbn      = {0045-7949},
  pages     = {1683 -- 1695},
  year      = {2008},
  language  = {en}
}
@phdthesis{Pham2011,
  author    = {Pham, Phu Tinh},
  title     = {Upper bound limit and shakedown analysis of elastic-plastic bounded linearly kinematic hardening structures},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  pages     = {140 S.},
  year      = {2011},
  language  = {en}
}
@article{MuellerVeggianJannsensMasrietal.1976,
  author    = {M{\"u}ller-Veggian, Mattea and Jannsens, R. and Masri, Y. El. and Michel, C.},
  title     = {Untersuchung der Hochspinzust{\"a}nde in ¹⁷⁸,¹⁸⁰ Os},
  series = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft. 11 (1976)},
  journal   = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft. 11 (1976)},
  pages     = {950},
  year      = {1976},
  language  = {en}
}
@article{ValeroBungErpicumetal.2022,
  author    = {Valero, Daniel and Bung, Daniel Bernhard and Erpicum, Sebastien and Peltier, Yann and Dewals, Benjamin},
  title     = {Unsteady shallow meandering flows in rectangular reservoirs: a modal analysis of URANS modelling},
  series = {Journal of Hydro-environment Research},
  journal   = {Journal of Hydro-environment Research},
  number    = {In Press},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1570-6443},
  doi       = {10.1016/j.jher.2022.03.002},
  year      = {2022},
  abstract  = {Shallow flows are common in natural and human-made environments. Even for simple rectangular shallow reservoirs, recent laboratory experiments show that the developing flow fields are particularly complex, involving large-scale turbulent structures. For specific combinations of reservoir size and hydraulic conditions, a meandering jet can be observed. While some aspects of this pseudo-2D flow pattern can be reproduced using a 2D numerical model, new 3D simulations, based on the unsteady Reynolds-Averaged Navier-Stokes equations, show consistent advantages as presented herein. A Proper Orthogonal Decomposition was used to characterize the four most energetic modes of the meandering jet at the free surface level, allowing comparison against experimental data and 2D (depth-averaged) numerical results. Three different isotropic eddy viscosity models (RNG k-ε, k-ε, k-ω) were tested. The 3D models accurately predicted the frequency of the modes, whereas the amplitudes of the modes and associated energy were damped for the friction-dominant cases and augmented for non-frictional ones. The performance of the three turbulence models remained essentially similar, with slightly better predictions by RNG k-ε model in the case with the highest Reynolds number. Finally, the Q-criterion was used to identify vortices and study their dynamics, assisting on the identification of the differences between: i) the three-dimensional phenomenon (here reproduced), ii) its two-dimensional footprint in the free surface (experimental observations) and iii) the depth-averaged case (represented by 2D models).},
  language  = {en}
}
@article{FerreinJacobsLakemeyer2005,
  author    = {Ferrein, Alexander and Jacobs, Stefan and Lakemeyer, Gerhard},
  title     = {Unreal Golog Bots / Jacobs, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {IJCAI-05 Workshop on Reasoning, Representation, and Learning in Computer Games},
  journal   = {IJCAI-05 Workshop on Reasoning, Representation, and Learning in Computer Games},
  pages     = {31 -- 36},
  year      = {2005},
  language  = {en}
}
@article{BialonskiWendlerLehnertz2011,
  author    = {Bialonski, Stephan and Wendler, Martin and Lehnertz, Klaus},
  title     = {Unraveling spurious properties of interaction networks with tailored random networks},
  series = {Plos one},
  volume    = {6},
  journal   = {Plos one},
  number    = {8},
  publisher = {Plos},
  address   = {San Francisco},
  doi       = {10.1371/journal.pone.0022826},
  pages     = {e22826},
  year      = {2011},
  abstract  = {We investigate interaction networks that we derive from multivariate time series with methods frequently employed in diverse scientific fields such as biology, quantitative finance, physics, earth and climate sciences, and the neurosciences. Mimicking experimental situations, we generate time series with finite length and varying frequency content but from independent stochastic processes. Using the correlation coefficient and the maximum cross-correlation, we estimate interdependencies between these time series. With clustering coefficient and average shortest path length, we observe unweighted interaction networks, derived via thresholding the values of interdependence, to possess non-trivial topologies as compared to Erd{\"o}s-R{\´e}nyi networks, which would indicate small-world characteristics. These topologies reflect the mostly unavoidable finiteness of the data, which limits the reliability of typically used estimators of signal interdependence. We propose random networks that are tailored to the way interaction networks are derived from empirical data. Through an exemplary investigation of multichannel electroencephalographic recordings of epileptic seizures - known for their complex spatial and temporal dynamics - we show that such random networks help to distinguish network properties of interdependence structures related to seizure dynamics from those spuriously induced by the applied methods of analysis.},
  language  = {en}
}
@article{Stulpe2009,
  author    = {Stulpe, Werner},
  title     = {Unitary Operator},
  series = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  journal   = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70622-9},
  pages     = {807 -- 809},
  year      = {2009},
  language  = {en}
}
@article{ReisselLustfeldHirschfeldetal.2009,
  author    = {Reißel, Martin and Lustfeld, H. and Hirschfeld, J. and Steffen, B.},
  title     = {Uniqueness of magnetotomography for fuel cells and fuel cell stacks / Lustfeld, H. ; Hirschfeld, J. ; Reißel, M ; Steffen, B.},
  series = {Journal of Physics A: Mathematical and Theoretical. 42 (2009), H. 495205},
  journal   = {Journal of Physics A: Mathematical and Theoretical. 42 (2009), H. 495205},
  isbn      = {0022-3689},
  pages     = {9 S.},
  year      = {2009},
  language  = {en}
}
@incollection{KrollLudwigs2008,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Unification of Conflict of Laws in Europe. Matrimonial Property Regimes},
  series = {European Challenges in Contemporary Family Law},
  booktitle = {European Challenges in Contemporary Family Law},
  editor    = {Boele-Woelki, Katharina},
  publisher = {Intersentia},
  address   = {Antwerpen},
  isbn      = {978-90-5095-692-5},
  pages     = {379 -- 393},
  year      = {2008},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@inproceedings{Eggert2019,
  author    = {Eggert, Mathias},
  title     = {Understanding the acceptance of smart home-based insurances},
  series = {Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm \& Uppsala, Sweden, June 8-14, 2019},
  booktitle = {Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm \& Uppsala, Sweden, June 8-14, 2019},
  isbn      = {978-1-7336325-0-8},
  pages     = {1 -- 15},
  year      = {2019},
  language  = {en}
}
@book{Gebhardt2011,
  author    = {Gebhardt, Andreas},
  title     = {Understanding Additive Manufacturing : Rapid Prototyping - Rapid Tooling - Rapid Manufacturing},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-42552-1},
  pages     = {VIII, 164 S. : farb. Ill.},
  year      = {2011},
  language  = {en}
}
@article{FredebeulKreinVogel2006,
  author    = {Fredebeul-Krein, Markus and Vogel, Erika},
  title     = {Underground Storage Facilities in the German natural gas market: A need for access regulation to ensure competition?},
  series = {Zeitschrift f{\"u}r Energiewirtschaft. 30 (2006), H. 4},
  journal   = {Zeitschrift f{\"u}r Energiewirtschaft. 30 (2006), H. 4},
  isbn      = {0343-5377},
  pages     = {257 -- 270},
  year      = {2006},
  language  = {en}
}
@article{WittmannGillessenOttoetal.1996,
  author    = {Wittmann, Klaus and Gillessen, F. and Otto, G. and R{\"o}stel, R.},
  title     = {Undercooling and solidification of metallic melts suspended in a non-nucleating matrix: Experiment NUCAL of the German Spacelab Mission D-2},
  series = {Acta Astronautica. 38 (1996), H. 1},
  journal   = {Acta Astronautica. 38 (1996), H. 1},
  isbn      = {0094-5765},
  pages     = {63 -- 68},
  year      = {1996},
  language  = {en}
}
@incollection{TranStaat2015,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Uncertainty multimode failure and shakedown analysis of shells},
  series = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  booktitle = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)},
  doi       = {10.1007/978-3-319-12928-0_14},
  pages     = {279 -- 298},
  year      = {2015},
  abstract  = {This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.},
  language  = {en}
}
@inproceedings{FellinKingKirschetal.2009,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  booktitle = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  publisher = {CRC Pr.},
  address   = {Boca Raton, Fla. [u.a.]},
  organization    = {International Conference on Structural Safety and Reliability <10, 2009, Osaka>},
  isbn      = {978-0-415-47557-0},
  pages     = {112 -- 114},
  year      = {2009},
  language  = {en}
}
@article{FellinKingKirschetal.2010,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Structural safety},
  volume    = {32},
  journal   = {Structural safety},
  number    = {6},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-4730},
  doi       = {10.1016/j.strusafe.2010.06.001},
  pages     = {402 -- 410},
  year      = {2010},
  abstract  = {This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.},
  language  = {en}
}
@article{SchubaBusboomHerwonoetal.2002,
  author    = {Schuba, Marko and Busboom, Axel and Herwono, Ian and Zavagli, Guido},
  title     = {Unambiguous Device Identification and Fast Connection Setup in Bluetooth / Busboom, Axel ; Herwono, Ian ; Schuba, Marko ; Zavagli, Guido},
  series = {European wireless 2002 : next generation wireless networks: technologies, protocols, services and applications ; technical sessions: 26 - 28 February 2002, tutorials: 25 February 2002, Centro Affari, Florence, Italy ; proceedings / sponsored by EUREL ... General chair: Luciano Lenzini},
  journal   = {European wireless 2002 : next generation wireless networks: technologies, protocols, services and applications ; technical sessions: 26 - 28 February 2002, tutorials: 25 February 2002, Centro Affari, Florence, Italy ; proceedings / sponsored by EUREL ... General chair: Luciano Lenzini},
  pages     = {1 -- 5},
  year      = {2002},
  language  = {en}
}
@book{BenknerStepping2002,
  author    = {Benkner, Thorsten and Stepping, Christoph},
  title     = {UMTS - Universal Mobile Telecommunications System},
  publisher = {Schlembach},
  address   = {Weil der Stadt},
  isbn      = {3-935340-07-9},
  pages     = {XVI, 511 S. : graph. Darst.},
  year      = {2002},
  language  = {en}
}
@article{SeynnesBojsenMollerAlbrachtetal.2015,
  author    = {Seynnes, O. R. and Bojsen-Moller, J. and Albracht, Kirsten and Arndt, A. and Cronin, N. J. and Finni, T. and Magnusson, S. P.},
  title     = {Ultrasound-based testing of tendon mechanical properties: a critical evaluation},
  series = {Journal of Applied Physiology},
  volume    = {118},
  journal   = {Journal of Applied Physiology},
  number    = {2},
  issn      = {8750-7587},
  doi       = {10.1152/japplphysiol.00849.2014},
  pages     = {133 -- 141},
  year      = {2015},
  language  = {en}
}
@article{Foerster1995,
  author    = {F{\"o}rster, Arnold},
  title     = {Ultrahigh frequency measurements of magnetic penetration length and surface impedance of YBa2Cu3O7-x microstriplines on Si and GaAs substrates . R{\"u}ders, F; Hollricher, O.; Copetti, C. A. ; F{\"o}rster, A. ; Buchal, Ch. ; Prusseit, W. ; Kinder, H.},
  series = {Journal of Applied Physics. 77 (1995), H. 10},
  journal   = {Journal of Applied Physics. 77 (1995), H. 10},
  isbn      = {1089-7550},
  pages     = {5282 -- 5286},
  year      = {1995},
  language  = {en}
}
@article{FoersterMarsoMikulicsetal.2005,
  author    = {F{\"o}rster, Arnold and Marso, M. and Mikulics, V. V. and Adam, R.},
  title     = {Ultrafast Phenomena in Freestanding LT-GaAs Devices. Marso, M.; Mikulics, V. V.; Adam, R.; Wu, S.; Zheng, X.; Camara, I.; Siebe, N. Y.; F{\"o}rster, A.; G{\"u}sten, R.; Kordos, P.; Sobolewski, R.},
  series = {Acta physica Polonica / A. 107 (2005), H. 1},
  journal   = {Acta physica Polonica / A. 107 (2005), H. 1},
  isbn      = {0587-4246},
  pages     = {109 -- 117},
  year      = {2005},
  language  = {en}
}
@article{MikulicsAdamKordosetal.2005,
  author    = {Mikulics, M. and Adam, R. and Kordos, P. and F{\"o}rster, Arnold and L{\"u}th, H. and Wu, S. and Zheng, X. and Sobolewski, R.},
  title     = {Ultrafast low-temperature-grown epitaxial GaAs photodetectors transferred on flexible plastic substrates},
  series = {IEEE photonics technology letters : IEEE PTL. 17 (2005), H. 8},
  journal   = {IEEE photonics technology letters : IEEE PTL. 17 (2005), H. 8},
  isbn      = {1041-1135},
  pages     = {1725 -- 1727},
  year      = {2005},
  language  = {en}
}
@article{FoersterMikulicsWuetal.2006,
  author    = {F{\"o}rster, Arnold and Mikulics, M. and Wu, S. and Marso, M.},
  title     = {Ultrafast and Highly Sensitive Photodetectors With Recessed Electrodes Fabricated on Low-Temperature-Grown GaAs. Mikulics, M.; Wu, S.; Marso, M.; Adam, R.; F{\"o}rster, A.; van der Hart, A.; Kordos, P.; L{\"u}th, H.; Sobolewski, R.},
  series = {IEEE Photonics Technology Letters. 18 (2006), H. 7},
  journal   = {IEEE Photonics Technology Letters. 18 (2006), H. 7},
  pages     = {820 -- 822},
  year      = {2006},
  language  = {en}
}
@article{SchererJacobiCastilloetal.2009,
  author    = {Scherer, Ulrich W. and Jacobi, M. and Castillo, J. and Foerstel, D. H.},
  title     = {Ultra-low-level measurements of 3H and 14C in wines and champagne / Scherer, U. W. ; Jacobi, M. ; Castillo, J. ; Foerstel, D. H.},
  series = {Radiation effects and defects in solids. 164 (2009), H. 5-6},
  journal   = {Radiation effects and defects in solids. 164 (2009), H. 5-6},
  isbn      = {1042-0150},
  pages     = {382 -- 385},
  year      = {2009},
  language  = {en}
}
@article{HeuermannSadeghfamBoehm2005,
  author    = {Heuermann, Holger and Sadeghfam, Arash and Boehm, H.},
  title     = {Ultra Compact Multi-Mode Filter with Novel Rat-Race Inductor. Sadeghfam, Arash; Heuermann, Holger; Boehm, H.},
  series = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 2},
  journal   = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 2},
  publisher = {Horizon House Publ},
  address   = {London},
  isbn      = {2-9600551-0-1},
  pages     = {4 pp.},
  year      = {2005},
  language  = {en}
}
@inproceedings{WalterGligorevicDetertetal.2010,
  author    = {Walter, Michael and Gligorevic, Snjezana and Detert, Thorben and Schnell, Michael},
  title     = {UHF/VHF air-to-air propagation measurements},
  series = {Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain},
  booktitle = {Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain},
  organization    = {European Association on Antennas and Propagation},
  isbn      = {978-1-4244-6431-9 ; 978-84-7653-472-4},
  pages     = {1 -- 5},
  year      = {2010},
  language  = {en}
}
@inproceedings{NakagawaKallweitMichauxetal.2016,
  author    = {Nakagawa, Masaki and Kallweit, Stephan and Michaux, Frank and Hojo, Teppei},
  title     = {Typical Velocity Fields and Vortical Structures around a Formula One Car, based on Experimental Investigations using Particle Image Velocimetry},
  series = {SAE International Journal of Passenger Cars - Mechanical Systems},
  booktitle = {SAE International Journal of Passenger Cars - Mechanical Systems},
  issn      = {1946-4002},
  doi       = {10.4271/2016-01-1611},
  pages     = {18 S.},
  year      = {2016},
  language  = {en}
}
@phdthesis{Kowalski2008,
  author    = {Kowalski, Julia},
  title     = {Two-phase Modeling of Debris Flows},
  publisher = {Mensch und Buch},
  address   = {Berlin},
  isbn      = {978-3-86664-524-0},
  pages     = {148},
  year      = {2008},
  language  = {en}
}
@inproceedings{KowalskiBarteltMcElwaine2007,
  author    = {Kowalski, Julia and Bartelt, Perry and McElwaine, J.},
  title     = {Two-phase debris flow modeling},
  series = {Geophysical Research Abstracts},
  booktitle = {Geophysical Research Abstracts},
  year      = {2007},
  language  = {en}
}
@inproceedings{KowalskiMcElwaine2008,
  author    = {Kowalski, Julia and McElwaine, J.},
  title     = {Two-phase debris flow modeling},
  series = {Geophysical Research Abstracts},
  booktitle = {Geophysical Research Abstracts},
  year      = {2008},
  language  = {en}
}
@article{SchaeferSchollWaagetal.1993,
  author    = {Sch{\"a}fer, Horst and Scholl, S. and Waag, A. and Hommel, D. (u.a.)},
  title     = {Two-dimensional Shubnikov-de Haas oscillations in modulation-doped CdTe/CdMnTe quantum-well structures},
  series = {Applied Physics Letters. 62 (1993), H. 23},
  journal   = {Applied Physics Letters. 62 (1993), H. 23},
  pages     = {3010 -- 3012},
  year      = {1993},
  language  = {en}
}