@incollection{Fabo2008,
  author    = {Fabo, Sabine},
  title     = {Parasit{\"a}re Strategien},
  series = {Konsumguerilla : Widerstand gegen Massenkultur?},
  booktitle = {Konsumguerilla : Widerstand gegen Massenkultur?},
  editor    = {Richard, Birgit},
  publisher = {Campus Verlag},
  address   = {Frankfurt [u.a.]},
  isbn      = {978-3-593-38762-8},
  pages     = {69 -- 82},
  year      = {2008},
  subject      = {Konsumgesellschaft},
  language  = {de}
}
@incollection{Matcha2007,
  author    = {Matcha, Heike},
  title     = {Parametrischer Geb{\"a}udeentwurf},
  series = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  booktitle = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Technische Universit{\"a}t Darmstadt},
  address   = {Darmstadt},
  pages     = {14 -- 15},
  year      = {2007},
  language  = {de}
}
@incollection{Fabo2022,
  author    = {Fabo, Sabine},
  title     = {Pandemische Momente},
  series = {Interaktion - Emotion - Desinfektion ; Kunst und Museum in Zeiten von Corona / Birgit Richard, Jana M{\"u}ller, Niklas von Reischach (Hrsg.)},
  booktitle = {Interaktion - Emotion - Desinfektion ; Kunst und Museum in Zeiten von Corona / Birgit Richard, Jana M{\"u}ller, Niklas von Reischach (Hrsg.)},
  publisher = {Campus},
  address   = {Frankfurt ; New York},
  isbn      = {978-3-593-51520-5 (Print)},
  pages     = {137 -- 140},
  year      = {2022},
  language  = {de}
}
@incollection{BraunerVervierBrillowskietal.2022,
  author    = {Brauner, Philipp and Vervier, Luisa and Brillowski, Florian and Dammers, Hannah and Steuer-Dankert, Linda and Schneider, Sebastian and Baier, Ralph and Ziefle, Martina and Gries, Thomas and Leicht-Scholten, Carmen and Mertens, Alexander and Nagel, Saskia K.},
  title     = {Organization Routines in Next Generation Manufacturing},
  series = {Forecasting Next Generation Manufacturing},
  booktitle = {Forecasting Next Generation Manufacturing},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-07734-0},
  doi       = {10.1007/978-3-031-07734-0_5},
  pages     = {75 -- 94},
  year      = {2022},
  abstract  = {Next Generation Manufacturing promises significant improvements in performance, productivity, and value creation. In addition to the desired and projected improvements regarding the planning, production, and usage cycles of products, this digital transformation will have a huge impact on work, workers, and workplace design. Given the high uncertainty in the likelihood of occurrence and the technical, economic, and societal impacts of these changes, we conducted a technology foresight study, in the form of a real-time Delphi analysis, to derive reliable future scenarios featuring the next generation of manufacturing systems. This chapter presents the organization dimension and describes each projection in detail, offering current case study examples and discussing related research, as well as implications for policy makers and firms. Specifically, we highlight seven areas in which the digital transformation of production will change how we work, how we organize the work within a company, how we evaluate these changes, and how employment and labor rights will be affected across company boundaries. The experts are unsure whether the use of collaborative robots in factories will replace traditional robots by 2030. They believe that the use of hybrid intelligence will supplement human decision-making processes in production environments. Furthermore, they predict that artificial intelligence will lead to changes in management processes, leadership, and the elimination of hierarchies. However, to ensure that social and normative aspects are incorporated into the AI algorithms, restricting measurement of individual performance will be necessary. Additionally, AI-based decision support can significantly contribute toward new, socially accepted modes of leadership. Finally, the experts believe that there will be a reduction in the workforce by the year 2030.},
  language  = {en}
}
@incollection{Barnat2007,
  author    = {Barnat, Miriam},
  title     = {Organisationale Lernprozesse und Machtquellen. Eine Fallstudie},
  series = {Beratung, Macht und organisationales Lernen},
  booktitle = {Beratung, Macht und organisationales Lernen},
  publisher = {VS Verlag f{\"u}r Sozialwissenschaften},
  address   = {Wiesbaden},
  isbn      = {978-3-531-90752-9},
  doi       = {10.1007/978-3-531-90752-9_7},
  pages     = {97 -- 110},
  year      = {2007},
  language  = {de}
}
@incollection{MuellerAltherrAholaetal.2018,
  author    = {M{\"u}ller, Tim M. and Altherr, Lena and Ahola, Marja and Schabel, Samuel and Pelz, Peter F.},
  title     = {Optimizing pressure screen systems in paper recycling: optimal system layout, component selection and operation},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-18499-5},
  doi       = {10.1007/978-3-030-18500-8_44},
  pages     = {355 -- 361},
  year      = {2018},
  abstract  = {Around 60\% of the paper worldwide is made from recovered paper. Especially adhesive contaminants, so called stickies, reduce paper quality. To remove stickies but at the same time keep as many valuable fibers as possible, multi-stage screening systems with several interconnected pressure screens are used. When planning such systems, suitable screens have to be selected and their interconnection as well as operational parameters have to be defined considering multiple conflicting objectives. In this contribution, we present a Mixed-Integer Nonlinear Program to optimize system layout, component selection and operation to find a suitable trade-off between output quality and yield.},
  language  = {en}
}
@incollection{AltherrLeisePfetschetal.2021,
  author    = {Altherr, Lena and Leise, Philipp and Pfetsch, Marc E. and Schmitt, Andreas},
  title     = {Optimal design of resilient technical systems on the example of water supply systems},
  series = {Mastering Uncertainty in Mechanical Engineering},
  booktitle = {Mastering Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78356-3},
  pages     = {429 -- 433},
  year      = {2021},
  language  = {en}
}
@incollection{BozakovSander2013,
  author    = {Bozakov, Zdravko and Sander, Volker},
  title     = {OpenFlow: A Perspective for Building Versatile Networks},
  series = {Network-Embedded Management and Applications},
  booktitle = {Network-Embedded Management and Applications},
  publisher = {Springer},
  address   = {New York, NY},
  isbn      = {978-1-4419-6769-5},
  doi       = {10.1007/978-1-4419-6769-5_11},
  pages     = {217 -- 245},
  year      = {2013},
  language  = {en}
}
@incollection{JordanKatzPieper2021,
  author    = {Jordan, Frank and Katz, Christiane and Pieper, Martin},
  title     = {Online-Kollaboration in der Mathematik: Ein Design-Based-Research-Projekt},
  series = {Forschungsimpulse f{\"u}r hybrides Lehren und Lernen an Hochschulen},
  booktitle = {Forschungsimpulse f{\"u}r hybrides Lehren und Lernen an Hochschulen},
  publisher = {TH K{\"o}ln},
  address   = {K{\"o}ln},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:832-cos4-9465},
  pages     = {245 -- 261},
  year      = {2021},
  abstract  = {Die Studie er{\"o}rtert anhand eines Fallbeispiels aus der Mathematik f{\"u}r Ingenieur*innen, wie didaktische Gestaltungsprinzipien f{\"u}r Soziale Pr{\"a}senz, Kollaboration und das L{\"o}sen von praxisnahen Problemen mit mathematischem Denken in einer Online-Umgebung aussehen k{\"o}nnen. Hierf{\"u}r zieht der Beitrag den forschungsmethodologischen Rahmen Design-Based Research (DBR) hinzu und berichtet {\"u}ber Zwischenergebnisse. DBR wird an dieser Stelle als eine systematische Herangehensweise an kurzfristige Lehrver{\"a}nderungen und als Chance auf dem Weg zu einer neuen Hochschullehre nach der COVID-19-Pandemie dargestellt, die theoretische und empirische Erkenntnisse mit Praxisverkn{\"u}pfung und -relevanz vereint.},
  language  = {de}
}
@incollection{GrossThulfautRenz2000,
  author    = {Groß, Rolf Fritz and Thulfaut, Christian and Renz, Ulrich},
  title     = {On-Line Simulation mit LabView: Experimentelle und numerische Analyse homogener Gasphasenreaktionen aus Kraftwerksprozessen,},
  series = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000},
  booktitle = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000},
  editor    = {Jamal, Rahman and Jaschinski, Hans},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {3-7785-2789-4 (print)},
  pages     = {103 -- 108},
  year      = {2000},
  abstract  = {The institute of heat transfer and air conditioning at the Aachen University of Technology operates several test facilities in order to investigate homogeneous and catalytical processes for the reduction of gaseous pollutants (e.g. nitrous oxide) of flue gases in a tempeature range up to 900°C. One test facility consists of a stainless steel reactor in which the influence of reducing additives can be investigated. The software tool, created with LabVIEW 5.01, offers the possibility to measure, visualize and control all relevant physical quantities and to gain a numerical solution of the problem by solving the one dimensional, steady state conservation equations.},
  language  = {de}
}
@incollection{Kotliar2021,
  author    = {Kotliar, Konstantin},
  title     = {Ocular rigidity: clinical approach},
  series = {Ocular Rigidity, Biomechanics and Hydrodynamics of the Eye},
  booktitle = {Ocular Rigidity, Biomechanics and Hydrodynamics of the Eye},
  editor    = {Pallikaris, I. and Tsilimbaris, M. K. and Dastiridou, A. I.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-64422-2},
  doi       = {10.1007/978-3-030-64422-2_2},
  pages     = {15 -- 43},
  year      = {2021},
  abstract  = {The term ocular rigidity is widely used in clinical ophthalmology. Generally it is assumed as a resistance of the whole eyeball to mechanical deformation and relates to biomechanical properties of the eye and its tissues. Basic principles and formulas for clinical tonometry, tonography and pulsatile ocular blood flow measurements are based on the concept of ocular rigidity. There is evidence for altered ocular rigidity in aging, in several eye diseases and after eye surgery. Unfortunately, there is no consensual view on ocular rigidity: it used to make a quite different sense for different people but still the same name. Foremost there is no clear consent between biomechanical engineers and ophthalmologists on the concept. Moreover ocular rigidity is occasionally characterized using various parameters with their different physical dimensions. In contrast to engineering approach, clinical approach to ocular rigidity claims to characterize the total mechanical response of the eyeball to its deformation without any detailed considerations on eye morphology or material properties of its tissues. Further to the previous chapter this section aims to describe clinical approach to ocular rigidity from the perspective of an engineer in an attempt to straighten out this concept, to show its advantages, disadvantages and various applications.},
  language  = {en}
}
@incollection{SchneiderWisselinkCzarnecki2018,
  author    = {Schneider, Dominik and Wisselink, Frank and Czarnecki, Christian},
  title     = {Nutzen und Rahmenbedingungen 5 informationsgetriebener Gesch{\"a}ftsmodelle des Internets der Dinge},
  series = {Digitalisierung in Unternehmen: von den theoretischen Ans{\"a}tzen zur praktischen Umsetzung},
  booktitle = {Digitalisierung in Unternehmen: von den theoretischen Ans{\"a}tzen zur praktischen Umsetzung},
  editor    = {Barton, Thomas and M{\"u}ller, Christian and Seel, Christian},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {9783658227739},
  doi       = {10.1007/978-3-658-22773-9_5},
  pages     = {67 -- 85},
  year      = {2018},
  abstract  = {Im Kontext der zunehmenden Digitalisierung wird das Internet der Dinge (englisch: Internet of Things, IoT) als ein technologischer Treiber angesehen, durch den komplett neue Gesch{\"a}ftsmodelle im Zusammenspiel unterschiedlicher Akteure entstehen k{\"o}nnen. Identifizierte Schl{\"u}sselakteure sind unter anderem traditionelle Industrieunternehmen, Kommunen und Telekommunikationsunternehmen. Letztere sorgen mit der Bereitstellung von Konnektivit{\"a}t daf{\"u}r, dass kleine Ger{\"a}te mit winzigen Batterien nahezu {\"u}berall und direkt an das Internet angebunden werden k{\"o}nnen. Es sind schon viele IoT-Anwendungsf{\"a}lle auf dem Markt, die eine Vereinfachung f{\"u}r Endkunden darstellen, wie beispielsweise Philips Hue Tap. Neben Gesch{\"a}ftsmodellen basierend auf Konnektivit{\"a}t besteht ein großes Potenzial f{\"u}r informationsgetriebene Gesch{\"a}ftsmodelle, die bestehende Gesch{\"a}ftsmodelle unterst{\"u}tzen sowie weiterentwickeln k{\"o}nnen. Ein Beispiel daf{\"u}r ist der IoT-Anwendungsfall Park and Joy der Deutschen Telekom AG, bei dem Parkpl{\"a}tze mithilfe von Sensoren vernetzt und Autofahrer in Echtzeit {\"u}ber verf{\"u}gbare Parkpl{\"a}tze informiert werden. Informationsgetriebene Gesch{\"a}ftsmodelle k{\"o}nnen auf Daten aufsetzen, die in IoT-Anwendungsf{\"a}llen erzeugt werden. Zum Beispiel kann ein Telekommunikationsunternehmen Mehrwert sch{\"o}pfen, indem es aus Daten entscheidungsrelevantere Informationen - sogenannte Insights - ableitet, die zur Steigerung der Entscheidungsagilit{\"a}t genutzt werden. Außerdem k{\"o}nnen Insights monetarisiert werden. Die Monetarisierung von Insights kann nur nachhaltig stattfinden, wenn sorgf{\"a}ltig gehandelt wird und Rahmenbedingungen ber{\"u}cksichtigt werden. In diesem Kapitel wird das Konzept informationsgetriebener Gesch{\"a}ftsmodelle erl{\"a}utert und anhand des konkreten Anwendungsfalls Park and Joy verdeutlicht. Dar{\"u}ber hinaus werden Nutzen, Risiken und Rahmenbedingungen diskutiert.},
  language  = {de}
}
@incollection{BraunBouckeBallmann2005,
  author    = {Braun, Carsten and Boucke, Alexander and Ballmann, Josef},
  title     = {Numerical study of the influence of dynamic pressure and deflected ailerons on the deformation of a high speed wing model},
  series = {High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ...},
  booktitle = {High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-22943-4},
  pages     = {225 -- 236},
  year      = {2005},
  language  = {en}
}
@incollection{MertensBecker1989,
  author    = {Mertens, Josef and Becker, K.},
  title     = {Numerical solution of flow equations : an aircraft designer's view},
  series = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  booktitle = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  editor    = {Ballmann, Josef},
  publisher = {Vieweg},
  address   = {Braunschweig},
  isbn      = {3-528-08098-1},
  doi       = {10.1007/978-3-322-87869-4_41},
  pages     = {403 -- 412},
  year      = {1989},
  abstract  = {Today the most accurate and cost effective industrial codes used in aircraft design are based on the full potential equation coupled with boundary layer equations. However, these are not capable to solve complicated three-dimensional problems of vortical flows and shocks. On the other hand Euler and Navier-Stokes codes are too expensive and not accurate enough for design purposes, especially in regard of drag and interference prediction. The reasons for these deficiencies are investigated and a way to overcome them by future developments is demonstrated.},
  language  = {en}
}
@incollection{MeskourisButenwegKalkeretal.2007,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Kalker, Ines and Mistler, Michael},
  title     = {Numerical simulation of historic masonry buildings},
  series = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)},
  booktitle = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)},
  publisher = {Franz Steiner Verlag},
  address   = {Stuttgart},
  isbn      = {978-3-515-09030-8 ; 3-515-09030-4},
  pages     = {171 -- 189},
  year      = {2007},
  language  = {en}
}
@incollection{Doeren1987,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Nichtrostende St{\"a}hle},
  series = {Jahrbuch Schweißtechnik. 1988},
  booktitle = {Jahrbuch Schweißtechnik. 1988},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik (DVS)},
  address   = {D{\"u}sseldorf},
  isbn      = {0935-0292},
  pages     = {188 -- 203},
  year      = {1987},
  language  = {de}
}
@incollection{MeskourisGellertButenweg2010,
  author    = {Meskouris, Konstantin and Gellert, Christoph and Butenweg, Christoph},
  title     = {Neuer Ansatz f{\"u}r die Bemessung von Mauerwerksbauten},
  series = {Innovationen im konstruktiven Ingenieurbau : Methoden - Materialien - Bauwerke ; Festschrift Professor Hirschfeld / hrsg. von Karl Beucke},
  booktitle = {Innovationen im konstruktiven Ingenieurbau : Methoden - Materialien - Bauwerke ; Festschrift Professor Hirschfeld / hrsg. von Karl Beucke},
  publisher = {Bauhaus-Univ. Weimar},
  address   = {Weimar},
  pages     = {217 -- 224},
  year      = {2010},
  language  = {de}
}
@incollection{PoghossianWeilandSchoening2014,
  author    = {Poghossian, Arshak and Weiland, Maryam and Sch{\"o}ning, Michael Josef},
  title     = {Nanoplate field-effect capacitors: a new transducer structure for multiparameter (bio-)chemical sensing},
  series = {Multisensor system for chemical analysis : materials and sensors},
  booktitle = {Multisensor system for chemical analysis : materials and sensors},
  editor    = {Lvova, Larisa and Kirsanov, Dmitry and di Natale, Corrado and Legin, Audrey},
  edition   = {1},
  publisher = {Jenny Stanford Publishing},
  address   = {Singapore},
  isbn      = {978-981-4411-15-8 ; 978-981-4411-16-5},
  doi       = {10.1201/b15491-11},
  pages     = {333 -- 373},
  year      = {2014},
  abstract  = {An array of electrically isolated nanoplate field-effect silicon-on-insulator (SOI) capacitors as a new transducer structure for multiparameter (bio-)chemical sensing is presented. The proposed approach allows addressable biasing and electrical readout of multiple nanoplate field-effect capacitive (bio-)chemical sensors on the same SOI chip, as well as differential-mode measurements. The realized sensor chip has been applied for pH and penicillin concentration measurements, electrical monitoring of polyelectrolyte multilayer formation, and the label-free electrical detection of consecutive deoxyribonucleic acid (DNA) hybridization and denaturation events.},
  language  = {en}
}
@incollection{PoghossianSchoening2017,
  author    = {Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Nanomaterial-Modified Capacitive Field-Effect Biosensors},
  series = {Springer Series on Chemical Sensors and Biosensors (Methods and Applications)},
  booktitle = {Springer Series on Chemical Sensors and Biosensors (Methods and Applications)},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  doi       = {10.1007/5346_2017_2},
  pages     = {1 -- 25},
  year      = {2017},
  abstract  = {The coupling of charged molecules, nanoparticles, and more generally, inorganic/organic nanohybrids with semiconductor field-effect devices based on an electrolyte-insulator-semiconductor (EIS) system represents a very promising strategy for the active tuning of electrochemical properties of these devices and, thus, opening new opportunities for label-free biosensing by the intrinsic charge of molecules. The simplest field-effect sensor is a capacitive EIS sensor, which represents a (bio-)chemically sensitive capacitor. In this chapter, selected examples of recent developments in the field of label-free biosensing using nanomaterial-modified capacitive EIS sensors are summarized. In the first part, we present applications of EIS sensors modified with negatively charged gold nanoparticles for the label-free electrostatic detection of positively charged small proteins and macromolecules, for monitoring the layer-by-layer formation of oppositely charged polyelectrolyte (PE) multilayers as well as for the development of an enzyme-based biomolecular logic gate. In the second part, examples of a label-free detection by means of EIS sensors modified with a positively charged weak PE layer are demonstrated. These include electrical detection of on-chip and in-solution hybridized DNA (deoxyribonucleic acid) as well as an EIS sensor with pH-responsive weak PE/enzyme multilayers for enhanced field-effect biosensing.},
  language  = {en}
}
@incollection{KrollLudwigs2017,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Names of individuals},
  series = {European Encyclopedia of Private International Law},
  booktitle = {European Encyclopedia of Private International Law},
  publisher = {Edward Elgar Publishing},
  address   = {Cheltenham, UK},
  isbn      = {9781782547228},
  year      = {2017},
  language  = {en}
}
@incollection{Laack2023,
  author    = {Laack, Walter van},
  title     = {Nahtoderfahrungen, Sterben und Tod aus der Perspektive von Medizin, Naturwissenschaften und Philosophie},
  series = {Thanatologie im deutschsprachigen Raum - Interdisziplin{\"a}re Perspektiven},
  booktitle = {Thanatologie im deutschsprachigen Raum - Interdisziplin{\"a}re Perspektiven},
  editor    = {Ortmanns, Bruno and Brauers, Angelika},
  publisher = {Rediroma-Verlag},
  isbn      = {978-3-98527-661-5},
  pages     = {129 -- 139},
  year      = {2023},
  language  = {de}
}
@incollection{MoorkampPetersonUibel2022,
  author    = {Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas},
  title     = {Nachhaltige Holzbr{\"u}cken f{\"u}r Geh- und Radwege},
  series = {Bauphysik Kalender 2022: Holzbau, 22. Jahrgang},
  booktitle = {Bauphysik Kalender 2022: Holzbau, 22. Jahrgang},
  editor    = {Fouad, Nabil A.},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {9783433033609 (Print)},
  doi       = {10.1002/9783433611081.ch17},
  pages     = {574 -- 592},
  year      = {2022},
  abstract  = {Am Lehr- und Forschungsgebiet Holzbau der Fachhochschule Aachen wurden im Rahmen des Forschungsvorhabens „Nachhaltige Standardbr{\"u}cken in Holzbauweise" Standardtypen f{\"u}r Geh- und Radwegbr{\"u}cken entwickelt. Die Br{\"u}cken sind durch konsequente Umsetzungen von Maßnahmen des konstruktiven Holzschutzes f{\"u}r eine Nutzung von mehr als 80~Jahren konzipiert. Innovative L{\"o}sungen f{\"u}r Bauteile und Anschl{\"u}sse sowie Materialalternativen im Bereich des Belages und der Gel{\"a}nder erm{\"o}glichen eine wartungsarme Konstruktion und tragen somit zur Wirtschaftlichkeit und Nachhaltigkeit bei. Um den Einsatz der entwickelten Standardbr{\"u}ckentypen in der Praxis zu erleichtern, wurden Leistungsverzeichnisse, Musterstatiken, Musterzeichnungen und umfangreiche Detailkataloge als Unterst{\"u}tzung f{\"u}r Planer und Bauherren erstellt. Damit die Randbedingungen f{\"u}r eine lange Lebensdauer w{\"a}hrend der Nutzung der Br{\"u}cke erhalten bleiben, wurden Leitf{\"a}den f{\"u}r die Pflege und Wartung sowie f{\"u}r die Br{\"u}ckenpr{\"u}fung erarbeitet. Der Beitrag gibt Einblicke in das Forschungsvorhaben und seine Resultate.},
  language  = {de}
}
@incollection{Fabo2004,
  author    = {Fabo, Sabine},
  title     = {Musik und Interaktivit{\"a}t : Modelle eines emanzipierten Handelns?},
  series = {Musik | Politik : Musik im Dialog (Jahrbuch der Berliner Gesellschaft f{\"u}r Neue Musik ; 5)},
  volume    = {2002},
  booktitle = {Musik | Politik : Musik im Dialog (Jahrbuch der Berliner Gesellschaft f{\"u}r Neue Musik ; 5)},
  editor    = {Br{\"u}stle, Christa},
  publisher = {Pfau Verlag},
  address   = {Saarbr{\"u}cken},
  isbn      = {3-89727-257-1},
  year      = {2004},
  language  = {de}
}
@incollection{MuellerVeggianKopsQuinetal.2007,
  author    = {M{\"u}ller-Veggian, Mattea and Kops, Elena Rota and Quin, Peng and Herzog, Hans},
  title     = {MRI Based Attenuation Correction for Brain PET Images},
  series = {Advances in medical engineering / [3rd RPT - Remagener Physiktage together with the Second Scientific Workshop of Medical Robotics, Navigation and Visualization ... Remagen ... 7.-9. M{\"a}rz 2007]. Thorsten M. Buzug (ed.) Part 1.},
  booktitle = {Advances in medical engineering / [3rd RPT - Remagener Physiktage together with the Second Scientific Workshop of Medical Robotics, Navigation and Visualization ... Remagen ... 7.-9. M{\"a}rz 2007]. Thorsten M. Buzug (ed.) Part 1.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-68763-4},
  doi       = {10.1007/978-3-540-68764-1_15},
  pages     = {93 -- 97},
  year      = {2007},
  abstract  = {This work describes a procedure to yield attenuation maps from MR images which are used for the absorption correction (AC) of brain PET data. Such an approach could be mandatory for future combined PET and MRI scanners, which probably do not include a transmission facility. T1-weighted MR images were segmented into brain tissue, bone, soft tissue, and sinus; attenuation coefficients corresponding to elemental composition and density as well as to 511 keV photon energy were respectively assigned. Attenuation maps containing up to four compartments were created and forward projected into sinograms with attenuation factors which then were used for AC during reconstruction of FDG-PET data. The commonly used AC based on a radioactive (68Ge) transmission scan served as reference. The reconstructed radioactivity values obtained with the MRI-based AC were about 20\% lower than those obtained with PET-based AC if the skull was not taken into account. Considering the skull the difference was still about 10\%. Our investigations demonstrate the feasibility of a MRI-based AC, but revealed also the necessity of a satisfying delineation of bone thickness which tends to be underestimated in our first approach of T1-weighted MR image segmentation.},
  language  = {en}
}
@incollection{RebelHueningScholletal.2015,
  author    = {Rebel, S{\"o}ren and H{\"u}ning, Felix and Scholl, Ingrid and Ferrein, Alexander},
  title     = {MQOne: Low-cost design for a rugged-terrain robot platform},
  series = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)},
  booktitle = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-22875-4 (print) ; 978-3-319-22876-1 (E-Book)},
  doi       = {10.1007/978-3-319-22876-1_19},
  pages     = {209 -- 221},
  year      = {2015},
  abstract  = {Rugged terrain robot designs are important for field robotics missions. A number of commercial platforms are available, however, at an impressive price. In this paper, we describe the hardware and software component of a low-cost wheeled rugged-terrain robot. The robot is based on an electric children quad bike and is modified to be driven by wire. In terms of climbing properties, operation time and payload it can compete with some of the commercially available platforms, but at a far lower price.},
  language  = {en}
}
@incollection{MedlinBarkerBaumannetal.1994,
  author    = {Medlin, L. K. and Barker, G. L. A. and Baumann, Marcus and Hayes, P. K.},
  title     = {Molecular biology and systematics},
  series = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  booktitle = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  publisher = {Clarendon Press},
  address   = {Oxford},
  isbn      = {0-19-857772-9},
  pages     = {393 -- 411},
  year      = {1994},
  language  = {en}
}
@incollection{GrossMuellerHertingetal.1997,
  author    = {Groß, Rolf Fritz and M{\"u}ller, D. and Herting, D. and Schneemann, A. and Renz, Ulrich},
  title     = {Modulare Messdatenerfassung in Forschung und Lehre},
  series = {Virtuelle Instrumente in der Praxis : Begleitband zum Kongress VIP '97},
  booktitle = {Virtuelle Instrumente in der Praxis : Begleitband zum Kongress VIP '97},
  editor    = {Rahman, Jamal and Jaschinski, Hans},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {978-3-7785-2667-5 Pp.},
  pages     = {282 -- 288},
  year      = {1997},
  abstract  = {The Lehrstuhl f{\"u}r W{\"a}rme{\"u}bertragung und Klimatechnik at the Aachen University of Technology operates several test facilities to investigate fundamentals of heat and mass transfer supported by the Deutsche Forschungsgemeinschaft, the Minister f{\"u}r Forschung und Technologie and the industry. In order to get high-resolution and reproselection of hardware components is as critical as the design of software routines to perform successful and accurate measurements. In the following the development of the measurement and control system for three different test facilities is presented and discussed. Special attention is given to the education of students within the framework of laboratories and scientific experiments.},
  language  = {de}
}
@incollection{FunkeBoernerHendricketal.2011,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Hendrick, P. and Recker, E.},
  title     = {Modification and testing of an engine and fuel control system for a hydrogen fuelled gas turbine},
  series = {Progress in Propulsion Physics. Vol. 2},
  booktitle = {Progress in Propulsion Physics. Vol. 2},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  isbn      = {978-2-7598-0673-7},
  pages     = {475 -- 486},
  year      = {2011},
  language  = {en}
}
@incollection{Engelmann2023,
  author    = {Engelmann, Ulrich M.},
  title     = {Moderationsexpertise - Onlinemoderation},
  series = {IT-Servicemanagement},
  booktitle = {IT-Servicemanagement},
  editor    = {Lindinger, Markus and Bartsch, Oliver},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-1154-7},
  pages     = {Kapitel 05532},
  year      = {2023},
  abstract  = {Damit Sie auch in den immer h{\"a}ufiger werdenden Onlineveranstaltungen als Moderator gut bestehen, sollten Sie wissen, was bei der Onlinemoderation im Besonderen zu beachten ist. In diesem dritten Teil der Beitragsserie erfahren Sie, warum online anders als offline ist. Die technischen M{\"o}glichkeiten werden vorgestellt und auch wie diese zu nutzen sind. Schließlich erhalten Sie Tipps, die Sie beim Sprechen online beachten sollten.},
  language  = {de}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise - die Methoden},
  series = {IT-Servicemanagement},
  booktitle = {IT-Servicemanagement},
  editor    = {Lindinger, Markus and Bartsch, Oliver},
  edition   = {54. Update},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-1154-7},
  pages     = {Kapitel 05531},
  year      = {2023},
  abstract  = {Damit Sie als Moderator effektiv und professionell moderieren k{\"o}nnen, sollten Sie die entsprechenden Methoden kennen. Mit den richtigen Methoden k{\"o}nnen Sie Diskussionen leiten, Konflikte l{\"o}sen, die Teilnehmer motivieren und daf{\"u}r sorgen, dass die Ziele der Veranstaltung erreicht werden. Außerdem helfen sie Ihnen, eine positive Atmosph{\"a}re zu schaffen und das Interesse der Teilnehmer zu halten. In diesem zweiten Beitrag der mehrteiligen Serie lernen Sie die grunds{\"a}tzlichen Methoden kennen, um erfolgreiche Teamsitzungen, Arbeitsgruppentreffen, Kick-offs und Meetings durchzuf{\"u}hren.},
  language  = {de}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise f{\"u}r QMBs - Onlinemoderation},
  series = {Qualit{\"a}tsmanagement im Gesundheitswesen},
  booktitle = {Qualit{\"a}tsmanagement im Gesundheitswesen},
  editor    = {Herbig, Nicola and Poppelreuter, Stefan},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-0714-4},
  pages     = {Kapitel 10816},
  year      = {2023},
  abstract  = {Damit Sie auch in den immer h{\"a}ufiger werdenden Onlineveranstaltungen als Moderator gut bestehen, sollten Sie wissen, was bei der Onlinemoderation im Besonderen zu beachten ist. In diesem dritten Teil der Beitragsserie erfahren Sie, warum online anders als offline ist. Die technischen M{\"o}glichkeiten werden vorgestellt und auch wie diese zu nutzen sind. Schließlich erhalten Sie Tipps, die Sie beim Sprechen online beachten sollten.},
  language  = {de}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise f{\"u}r QMBs - die Methoden},
  series = {Qualit{\"a}tsmanagement im Gesundheitswesen},
  booktitle = {Qualit{\"a}tsmanagement im Gesundheitswesen},
  editor    = {Herbig, Nicola and Poppelreuter, Stefan},
  edition   = {60. Update},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-0714-4},
  pages     = {Kapitel 10815},
  year      = {2023},
  abstract  = {Damit Sie als Moderator effektiv und professionell moderieren k{\"o}nnen, sollten Sie die entsprechenden Methoden kennen. Mit den richtigen Methoden k{\"o}nnen Sie Diskussionen leiten, Konflikte l{\"o}sen, die Teilnehmer motivieren und daf{\"u}r sorgen, dass die Ziele der Veranstaltung erreicht werden. Außerdem helfen sie Ihnen, eine positive Atmosph{\"a}re zu schaffen und das Interesse der Teilnehmer zu halten. In diesem zweiten Beitrag der mehrteiligen Serie lernen Sie die grunds{\"a}tzlichen Methoden kennen, um erfolgreiche Teamsitzungen, Arbeitsgruppentreffen, Kick-offs und Meetings durchzuf{\"u}hren.},
  language  = {de}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise f{\"u}r QMBs - die Methoden},
  series = {Qualit{\"a}tsmanagement in Dienstleistungsunternehmen},
  booktitle = {Qualit{\"a}tsmanagement in Dienstleistungsunternehmen},
  editor    = {Thomann, Hermann and Tr{\"a}ger, Thomas},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-0473-0},
  pages     = {Kapitel 08631},
  year      = {2023},
  abstract  = {Damit Sie als Moderator effektiv und professionell moderieren k{\"o}nnen, sollten Sie die entsprechenden Methoden kennen. Mit den richtigen Methoden k{\"o}nnen Sie Diskussionen leiten, Konflikte l{\"o}sen, die Teilnehmer motivieren und daf{\"u}r sorgen, dass die Ziele der Veranstaltung erreicht werden. Außerdem helfen sie Ihnen, eine positive Atmosph{\"a}re zu schaffen und das Interesse der Teilnehmer zu halten. In diesem zweiten Beitrag der mehrteiligen Serie lernen Sie die grunds{\"a}tzlichen Methoden kennen, um erfolgreiche Teamsitzungen, Arbeitsgruppentreffen, Kick-offs und Meetings durchzuf{\"u}hren.},
  language  = {de}
}
@incollection{EngelmannBaumann2022,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise f{\"u}r QMBs - das Mindset},
  series = {Qualit{\"a}tsmanagement im Gesundheitswesen},
  booktitle = {Qualit{\"a}tsmanagement im Gesundheitswesen},
  editor    = {Herbig, Nicola and Poppelreuter, Stefan},
  edition   = {59. Update},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-0714-4},
  pages     = {Kapitel 10814},
  year      = {2022},
  abstract  = {Teamsitzungen, Arbeitsgruppentreffen, Kickoffs und Meetings - sie alle werden mit dem Ziel durchgef{\"u}hrt, innerhalb einer vorgegebenen Zeitspanne ein gemeinsames Arbeitsziel zu erreichen. Damit die Zielerreichung auch bei komplexeren Arbeitsauftr{\"a}gen nicht vom Zufall abh{\"a}ngt, empfiehlt es sich, die Leitung des Ablaufs einem Moderator zu {\"u}bertragen. In diesem Beitrag einer mehrteiligen Serie wird beschrieben, {\"u}ber welches Mindset der Moderator verf{\"u}gen sollte, welche grunds{\"a}tzlichen Methoden hilfreich sind und was bei der Onlinemoderation im Besonderen zu beachten ist.},
  language  = {de}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise f{\"u}r QMBs - das Mindset},
  series = {Qualit{\"a}tsmanagement in Dienstleistungsunternehmen},
  booktitle = {Qualit{\"a}tsmanagement in Dienstleistungsunternehmen},
  editor    = {Thomann, Hermann and Tr{\"a}ger, Thomas},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-0473-0},
  pages     = {Kapitel 08630},
  year      = {2023},
  abstract  = {Teamsitzungen, Arbeitsgruppentreffen, Kickoffs und Meetings - sie alle werden mit dem Ziel durchgef{\"u}hrt, innerhalb einer vorgegebenen Zeitspanne ein gemeinsames Arbeitsziel zu erreichen. Damit die Zielerreichung auch bei komplexeren Arbeitsauftr{\"a}gen nicht vom Zufall abh{\"a}ngt, empfiehlt es sich, die Leitung des Ablaufs einem Moderator zu {\"u}bertragen. In diesem Beitrag einer mehrteiligen Serie wird beschrieben, {\"u}ber welches Mindset der Moderator verf{\"u}gen sollte, welche grunds{\"a}tzlichen Methoden hilfreich sind und was bei der Onlinemoderation im Besonderen zu beachten ist.},
  language  = {de}
}
@incollection{EngelmannBaumann2023,
  author    = {Engelmann, Ulrich M. and Baumann, Martin},
  title     = {Moderationsexpertise - das Mindset},
  series = {IT-Servicemanagement},
  booktitle = {IT-Servicemanagement},
  editor    = {Lindinger, Markus and Bartsch, Oliver},
  edition   = {54. Update},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-1154-7},
  pages     = {Kapitel 05530},
  year      = {2023},
  abstract  = {Teamsitzungen, Arbeitsgruppentreffen, Kickoffs und Meetings - sie alle werden mit dem Ziel durchgef{\"u}hrt, innerhalb einer vorgegebenen Zeitspanne ein gemeinsames Arbeitsziel zu erreichen. Damit die Zielerreichung auch bei komplexeren Arbeitsauftr{\"a}gen nicht vom Zufall abh{\"a}ngt, empfiehlt es sich, die Leitung des Ablaufs einem Moderator zu {\"u}bertragen. In diesem Beitrag einer dreiteiligen Serie wird beschrieben, {\"u}ber welches Mindset der Moderator verf{\"u}gen sollte, welche grunds{\"a}tzlichen Methoden hilfreich sind und was bei der Onlinemoderation im Besonderen zu beachten ist.},
  language  = {de}
}
@incollection{Kurz2008,
  author    = {Kurz, Melanie},
  title     = {Modell},
  series = {W{\"o}rterbuch Design : begriffliche Perspektiven des Design},
  booktitle = {W{\"o}rterbuch Design : begriffliche Perspektiven des Design},
  editor    = {Erlhoff, Michael},
  publisher = {Birkh{\"a}user},
  address   = {Basel},
  isbn      = {978-3-7643-7738-0},
  pages     = {276 -- 277},
  year      = {2008},
  language  = {de}
}
@incollection{DiltheyBrandenburgSchleser2005,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Mikrokleben},
  series = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  booktitle = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-23706-8},
  pages     = {161 -- 172},
  year      = {2005},
  language  = {de}
}
@incollection{BouvyKuperjans2004,
  author    = {Bouvy, C. and Kuperjans, Isabel},
  title     = {Mikro-Gasturbinen : eine neue Technologie zur Kraft-W{\"a}rme-Kopplung in kleinen und mittleren Unternehmen},
  series = {Entwicklungslinien der Energietechnik 2004},
  booktitle = {Entwicklungslinien der Energietechnik 2004},
  edition   = {CD-ROM-Ausg.},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  year      = {2004},
  language  = {de}
}
@incollection{HeuermannFinger2014,
  author    = {Heuermann, Holger and Finger, Torsten},
  title     = {Microwave Spark Plug for Very High-Pressure Conditions},
  series = {Ignition systems for gasoline engines},
  booktitle = {Ignition systems for gasoline engines},
  editor    = {G{\"u}nther, Michael},
  publisher = {DCM Druck},
  address   = {Meckenheim},
  pages     = {269 -- 282},
  year      = {2014},
  language  = {en}
}
@incollection{DigelAkimbekovKistaubayevaetal.2018,
  author    = {Digel, Ilya and Akimbekov, Nuraly Sh. and Kistaubayeva, Aida and Zhubanova, Azhar A.},
  title     = {Microbial Sampling from Dry Surfaces: Current Challenges and Solutions},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_19},
  pages     = {421 -- 456},
  year      = {2018},
  abstract  = {Sampling of dry surfaces for microorganisms is a main component of microbiological safety and is of critical importance in many fields including epidemiology, astrobiology as well as numerous branches of medical and food manufacturing. Aspects of biofilm formation, analysis and removal in aqueous solutions have been thoroughly discussed in literature. In contrast, microbial communities on air-exposed (dry) surfaces have received significantly less attention. Diverse surface sampling methods have been developed in order to address various surfaces and microbial groups, but they notoriously show poor repeatability, low recovery rates and suffer from lack of mutual consistency. Quantitative sampling for viable microorganisms represents a particular challenge, especially on porous and irregular surfaces. Therefore, it is essential to examine in depth the factors involved in microorganisms' recovery efficiency and accuracy depending on the sampling technique used. Microbial colonization, retention and community composition on different dry surfaces are very complex and rely on numerous physicochemical and biological factors. This study is devoted to analyze and review the (a) physical phenomena and intermolecular forces relevant for microbiological surface sampling; (b) challenges and problems faced by existing sampling methods for viable microorganisms and (c) current directions of engineering and research aimed at improvement of quality and efficiency of microbiological surface sampling.},
  language  = {en}
}
@incollection{DautzenbergGrossRenz1996,
  author    = {Dautzenberg, H. and Groß, Rolf Fritz and Renz, Ulrich},
  title     = {Meßtechnik auf dem Pr{\"u}fstand: Forschung zur Heißgasfiltration},
  series = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 1996},
  booktitle = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 1996},
  editor    = {Jamal, Rahman},
  publisher = {National Instruments Germany},
  address   = {M{\"u}nchen},
  pages     = {202 -- 208},
  year      = {1996},
  abstract  = {Im Rahmen von Forschungsvorhaben des BMBF und verschiedener Industriepartner betreibt der Lehrstuhl f{\"u}r W{\"a}rme{\"u}bertragung und Klimatechnik der RWTH Aachen Pilotanlagen und Pr{\"u}fst{\"a}nde f{\"u}r Untersuchungen auf dem Gebiet der Heißgasfiltration mit keramischen Filterelementen. Als wesentlicher Garant f{\"u}r den Erfolg der Forschungsarbeit muß die auf das jeweilige Projekt genau abgestimmte Meß- und Regelungstechnik angesehen werden. Hierbei z{\"a}hlt neben der Auswahl geeigneter Hardwarekomponenten auch die Softwareentwicklung unter einer leistungsstarken und zuverl{\"a}ssigen Programmierumgebung. Anhand des Aufbaus dreier Versuchsanlagen im Technikumsmaßstab soll das Anforderungsprofil an die Meßtechnik bis hin zur Umsetzung innerhalb der Anlage skizziert werden. Der Heißgasfiltrationspr{\"u}fstand im Heizkraftwerk der RWTH Aachen dient der Beobachtung des Reinigungsverhaltens keramischer Filterelemente bei der Heißgasentstaubung im Temperaturbereich bis 850 Grad C. Wesentlich f{\"u}r die Meßwerterfassung ist hierbei die Kopplung eines Orion-Datenloggers der Firma Schlumberger mit LabView 4.0. Im Hochtemperaturofen des Lehrstuhls werden instation{\"a}re Druckmessungen an einer keramischen Filterkerze w{\"a}hrend eines Abreinigungsimpulses bei 950 Grad C mit hoher Samplingrate durchgef{\"u}hrt. Hierbei {\"u}bernimmt eine durch LabView 4.0 angesteuerte E-Series Karte der Firma National Instruments die Signalaufnahme. Die katalytische Schadstoffreduktion und Entstaubung heißer Rauchgase bei 900 Grad C sind Ziele der Untersuchungen in einer erstellten Versuchsanlage mit einem Quarzglasreaktor. Die Signalerfassung und -konditionierung erfolgt {\"u}ber SCXI in Verbindung mit LabView 4.0, die Steuerung der Anlage {\"u}bernehmen zwei Multifunktionskarten (National Instruments).},
  language  = {de}
}
@incollection{ThulfautGrossRenz2000,
  author    = {Thulfaut, Christian and Groß, Rolf Fritz and Renz, Ulrich},
  title     = {Messwerterfassung und -auswertung mit LabView: Experimentelle Analyse der Mischungsg{\"u}te in Hybridzellenk{\"u}hlt{\"u}rmen},
  series = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000},
  booktitle = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000},
  editor    = {Jamal, Rahman and Jaschinski, Hans},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {3-7785-2789-4 (print)},
  pages     = {54 -- 60},
  year      = {2000},
  abstract  = {Zur K{\"u}hlung von Abw{\"a}rmestr{\"o}men aus Kraftwerksprozessen werden in zunehmenden Maße Hybridzellenk{\"u}hlt{\"u}rme mit Zwangskonvektion eingesetzt, deren wesentlicher Vorteil ihre geringe Bauh{\"o}he ist. Um bei derartigen K{\"u}hlt{\"u}rmen eine Sichtbehinderung oder Glatteisgef{\"a}hrdung durch bodennahen Nebel zu vermeiden, muss durch eine optimale Vermischung des Trocken- und Naßluftanteils gew{\"a}hrleistet sein, daß aus der K{\"u}hlturmkrone keine Nebelschwaden austreten. In Zusammenarbeit mit der Industrie betreibt der Lehrstuhl f{\"u}r W{\"a}rme{\"u}bertragung und Klimatechnik der RWTH Aachen einen Versuchsstand zur Erfassung der Mischungsg{\"u}te in Hybridzellenk{\"u}hlt{\"u}rmen. In maßstabsgerechter Nachbildung k{\"o}nnen dabei am Modell alle relevanten Einflußgr{\"o}ßen wie K{\"u}hlturmgeometrie, Gestaltung zus{\"a}tzlicher Mischeinbauten sowie die Betriebsparameter variiert werden. Mit Hilfe einer unter LabView 5.01 erstellten Software werden sowohl die l3etriebszust{\"u}ncle online {\"u}berwacht, als auch die ben{\"o}tigten Meßwerte zur Bestimmung der Mischungsg{\"u}te erfaßt. {\"U}ber die grafische Oberfl{\"a}che k{\"o}nnen s{\"a}mtliche Meßoptionen gesteuert sowie alle Meßdaten visualisiert und kontrolliert werden. In das LabView-Programm sind dar{\"u}ber hinaus Routinen zur Auswertung der Daten implementiert worden, die sowohl eine direkte Darstellung der Ergebnisse in Form von Diagrammen erm{\"o}glichen, als auch zur Weiterverarbeitung einen Datenexport in eine Microsoft- Excel-Tabelle vorsehen.},
  language  = {de}
}
@incollection{PieperWaehlisch2017,
  author    = {Pieper, Martin and W{\"a}hlisch, Georg},
  title     = {Mehrwert von E-Learning durch f{\"a}cher{\"u}bergreifenden Einsatz},
  series = {Teaching is Touching the Future \& ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Pr{\"u}fen},
  booktitle = {Teaching is Touching the Future \& ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Pr{\"u}fen},
  publisher = {UVW Universit{\"a}tsverlag Webler},
  address   = {Bielefeld},
  isbn      = {978-3-946017-05-9},
  pages     = {193 -- 196},
  year      = {2017},
  language  = {de}
}
@incollection{Hebel2014,
  author    = {Hebel, Christoph},
  title     = {Mehrwert},
  series = {Unser Dorf hat Zukunft},
  booktitle = {Unser Dorf hat Zukunft},
  publisher = {St{\"a}dteRegion Aachen},
  address   = {Aachen},
  pages     = {6 -- 7},
  year      = {2014},
  language  = {de}
}
@incollection{FaboEisenbeis1995,
  author    = {Fabo, Sabine and Eisenbeis, Manfred},
  title     = {Medienkultur : die mediale Konstruktion von Wirklichkeit},
  series = {Globalisierung der Zivilisation und {\"u}berlieferte Kulturen : 28. - 30. April 1995},
  booktitle = {Globalisierung der Zivilisation und {\"u}berlieferte Kulturen : 28. - 30. April 1995},
  editor    = {Weber, Hermann},
  publisher = {Katholischer Akademischer Ausl{\"a}nder-Dienst},
  address   = {Bonn},
  isbn      = {3-926288-10-8},
  year      = {1995},
  language  = {de}
}
@incollection{BhattaraiStaat2018,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {Mechanics of soft tissue reactions to textile mesh implants},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_11},
  pages     = {251 -- 275},
  year      = {2018},
  abstract  = {For pelvic floor disorders that cannot be treated with non-surgical procedures, minimally invasive surgery has become a more frequent and safer repair procedure. More than 20 million prosthetic meshes are implanted each year worldwide. The simple selection of a single synthetic mesh construction for any level and type of pelvic floor dysfunctions without adopting the design to specific requirements increase the risks for mesh related complications. Adverse events are closely related to chronic foreign body reaction, with enhanced formation of scar tissue around the surgical meshes, manifested as pain, mesh erosion in adjacent structures (with organ tissue cut), mesh shrinkage, mesh rejection and eventually recurrence. Such events, especially scar formation depend on effective porosity of the mesh, which decreases discontinuously at a critical stretch when pore areas decrease making the surgical reconstruction ineffective that further augments the re-operation costs. The extent of fibrotic reaction is increased with higher amount of foreign body material, larger surface, small pore size or with inadequate textile elasticity. Standardized studies of different meshes are essential to evaluate influencing factors for the failure and success of the reconstruction. Measurements of elasticity and tensile strength have to consider the mesh anisotropy as result of the textile structure. An appropriate mesh then should show some integration with limited scar reaction and preserved pores that are filled with local fat tissue. This chapter reviews various tissue reactions to different monofilament mesh implants that are used for incontinence and hernia repairs and study their mechanical behavior. This helps to predict the functional and biological outcomes after tissue reinforcement with meshes and permits further optimization of the meshes for the specific indications to improve the success of the surgical treatment.},
  language  = {en}
}
@incollection{ButenwegBollenbeck2003,
  author    = {Butenweg, Christoph and Bollenbeck, S.},
  title     = {Mauerwerksbauten unter Erdbebenbelastung},
  series = {Bauwerke und Erdbeben},
  booktitle = {Bauwerke und Erdbeben},
  publisher = {Vieweg},
  address   = {Wiesbaden},
  isbn      = {3-528-02574-3},
  pages     = {385 -- 397},
  year      = {2003},
  language  = {de}
}
@incollection{ButenwegBollenbeck2003,
  author    = {Butenweg, Christoph and Bollenbeck, S.},
  title     = {Mauerwerksbauten},
  series = {Bauwerke und Erdbeben / Konstantin Meskouris ; Klaus-G. Hinzen},
  booktitle = {Bauwerke und Erdbeben / Konstantin Meskouris ; Klaus-G. Hinzen},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {3-528-02574-3 (Print) ; 978-3-322-96831-9 (E-Book)},
  doi       = {10.1007/978-3-322-96831-9_7},
  pages     = {385 -- 397},
  year      = {2003},
  language  = {de}
}
@incollection{GeislerPieper2017,
  author    = {Geisler, Simon and Pieper, Martin},
  title     = {Mathematik PLuS als E-Book. Kann ein E-Book zur Ingenieursmathematik alle Lerntypen ansprechen?},
  series = {Das elektronische Schulbuch 2016},
  booktitle = {Das elektronische Schulbuch 2016},
  publisher = {LIT Verlag},
  address   = {Berlin},
  isbn      = {978-3-643-13475-2},
  pages     = {99 -- 111},
  year      = {2017},
  language  = {de}
}