@book{KaminskyKallweitWeberetal.2006,
  author    = {Kaminsky, Radoslav and Kallweit, Stephan and Weber, Hans-Joachim and Simons, Antoine and Verdonck, Pascal},
  title     = {Stereo high speed PIV measurements behind two different artificial heart valves},
  pages     = {9 S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {en}
}
@book{Artmann2011,
  author    = {Artmann, Gerhard},
  title     = {Stem cell engineering : principles and applications / Gerhard M. Artmann ... eds.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-11864-7},
  pages     = {XLI, 541 S. : Ill., graph. Darst.},
  year      = {2011},
  language  = {en}
}
@article{HeinrichBlumBussmannetal.2002,
  author    = {Heinrich, U. and Blum, A. and Bussmann, N. and Engels, R. and Kemmerling, G. and Weber, S. and Ziemons, Karl},
  title     = {Statistical studies on the light output and energy resolution of small LSO single crystals with different surface treatments combined with various reflector materials},
  series = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  volume    = {486},
  journal   = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  number    = {1-2},
  issn      = {0168-9002},
  pages     = {60 -- 66},
  year      = {2002},
  abstract  = {The optimization of light output and energy resolution of scintillators is of special interest for the development of high resolution and high sensitivity PET. The aim of this work is to obtain statistically reliable results concerning optimal surface treatment of scintillation crystals and the selection of reflector material. For this purpose, raw, mechanically polished and etched LSO crystals (size 2×2×10 mm3) were combined with various reflector materials (Teflon tape, Teflon matrix, BaSO4) and exposed to a 22Na source. In order to ensure the statistical reliability of the results, groups of 10 LSO crystals each were measured for all combinations of surface treatment and reflector material. Using no reflector material the light output increased up to 551±35\% by mechanical polishing the surface compared to 100±5\% for raw crystals. Etching the surface increased the light output to 441±29\%. The untreated crystals had an energy resolution of 24.6±4.0\%. By mechanical polishing the surface it was possible to achieve an energy resolution of 13.2±0.8\%, by etching of 14.8±0.7\%. In combination with BaSO4 as reflector material the maximum increase of light output has been established to 932±57\% for mechanically polished and 895±61\% for etched crystals. The combination with BaSO4 also caused the best improvement of the energy resolution up to 11.6±0.2\% for mechanically polished and 12.2±0.3\% for etched crystals. Relating to the light output there was no significant statistical difference between the two surface treatments in combination with BaSO4. In contrast to this, the statistical results of the energy resolution have shown the combination of mechanical polishing and BaSO4 as the optimum.},
  language  = {en}
}
@article{BaringhausGaigallThiele2018,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel and Thiele, Jan Philipp},
  title     = {Statistical inference for L²-distances to uniformity},
  series = {Computational Statistics},
  volume    = {2018},
  journal   = {Computational Statistics},
  number    = {33},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1613-9658},
  doi       = {10.1007/s00180-018-0820-0},
  pages     = {1863 -- 1896},
  year      = {2018},
  abstract  = {The paper deals with the asymptotic behaviour of estimators, statistical tests and confidence intervals for L²-distances to uniformity based on the empirical distribution function, the integrated empirical distribution function and the integrated empirical survival function. Approximations of power functions, confidence intervals for the L²-distances and statistical neighbourhood-of-uniformity validation tests are obtained as main applications. The finite sample behaviour of the procedures is illustrated by a simulation study.},
  language  = {en}
}
@article{LehnertzMormannOsterhageetal.2007,
  author    = {Lehnertz, Klaus and Mormann, Florian and Osterhage, Hannes and Andy, M{\"u}ller and Prusseit, Jens and Chernihovskyi, Anton and Staniek, Matth{\"a}us and Krug, Dieter and Bialonski, Stephan and Elger, Christian E.},
  title     = {State-of-the-art of seizure prediction},
  series = {Journal of Clinical Neurophysiology},
  volume    = {24},
  journal   = {Journal of Clinical Neurophysiology},
  number    = {2},
  issn      = {1537-1603},
  doi       = {10.1097/WNP.0b013e3180336f16},
  pages     = {147 -- 153},
  year      = {2007},
  language  = {en}
}
@article{HorstmannBialonskiNoenningetal.2010,
  author    = {Horstmann, Marie-Therese and Bialonski, Stephan and Noenning, Nina and Mai, Heinke and Prusseit, Jens and Wellmer, J{\"o}rg and Hinrichs, Hermann and Lehnertz, Klaus},
  title     = {State dependent properties of epileptic brain networks: Comparative graph-theoretical analyses of simultaneously recorded EEG and MEG},
  series = {Clinical Neurophysiology},
  volume    = {121},
  journal   = {Clinical Neurophysiology},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1388-2457},
  doi       = {10.1016/j.clinph.2009.10.013},
  pages     = {172 -- 185},
  year      = {2010},
  abstract  = {Objective To investigate whether functional brain networks of epilepsy patients treated with antiepileptic medication differ from networks of healthy controls even during the seizure-free interval. Methods We applied different rules to construct binary and weighted networks from EEG and MEG data recorded under a resting-state eyes-open and eyes-closed condition from 21 epilepsy patients and 23 healthy controls. The average shortest path length and the clustering coefficient served as global statistical network characteristics. Results Independent on the behavioral condition, epileptic brains exhibited a more regular functional network structure. Similarly, the eyes-closed condition was characterized by a more regular functional network structure in both groups. The amount of network reorganization due to behavioral state changes was similar in both groups. Consistent findings could be achieved for networks derived from EEG but hardly from MEG recordings, and network construction rules had a rather strong impact on our findings. Conclusions Despite the locality of the investigated processes epileptic brain networks differ in their global characteristics from non-epileptic brain networks. Further methodological developments are necessary to improve the characterization of disturbed and normal functional networks. Significance An increased regularity and a diminished modulation capability appear characteristic of epileptic brain networks.},
  language  = {en}
}
@article{SchaeferRessSpahnetal.1998,
  author    = {Sch{\"a}fer, Horst and Ress, H. R. and Spahn, W. and Ebel, R. (u.a.)},
  title     = {Start of misfit relaxation in GaAs-ZnSe heterostructures},
  series = {Journal of Crystal Growth. 184-185 (1998)},
  journal   = {Journal of Crystal Growth. 184-185 (1998)},
  isbn      = {0022-0248},
  pages     = {90 -- 94},
  year      = {1998},
  language  = {en}
}
@inproceedings{KohlSchmidtsKloeseretal.2021,
  author    = {Kohl, Philipp and Schmidts, Oliver and Kl{\"o}ser, Lars and Werth, Henri and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {STAMP 4 NLP - an agile framework for rapid quality-driven NLP applications development},
  series = {Quality of Information and Communications Technology. QUATIC 2021},
  booktitle = {Quality of Information and Communications Technology. QUATIC 2021},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-85346-4},
  doi       = {10.1007/978-3-030-85347-1_12},
  pages     = {156 -- 166},
  year      = {2021},
  abstract  = {The progress in natural language processing (NLP) research over the last years, offers novel business opportunities for companies, as automated user interaction or improved data analysis. Building sophisticated NLP applications requires dealing with modern machine learning (ML) technologies, which impedes enterprises from establishing successful NLP projects. Our experience in applied NLP research projects shows that the continuous integration of research prototypes in production-like environments with quality assurance builds trust in the software and shows convenience and usefulness regarding the business goal. We introduce STAMP 4 NLP as an iterative and incremental process model for developing NLP applications. With STAMP 4 NLP, we merge software engineering principles with best practices from data science. Instantiating our process model allows efficiently creating prototypes by utilizing templates, conventions, and implementations, enabling developers and data scientists to focus on the business goals. Due to our iterative-incremental approach, businesses can deploy an enhanced version of the prototype to their software environment after every iteration, maximizing potential business value and trust early and avoiding the cost of successful yet never deployed experiments.},
  language  = {en}
}
@article{OberlaenderMayerGreeffetal.2018,
  author    = {Oberl{\"a}nder, Jan and Mayer, Marlena and Greeff, Anton and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Spore-based biosensor to monitor the microbicidal efficacy of gaseous hydrogen peroxide sterilization processes},
  series = {Biosensors and Bioelectronics},
  volume    = {104},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2017.12.045},
  pages     = {87 -- 94},
  year      = {2018},
  abstract  = {In this work, a spore-based biosensor is evaluated to monitor the microbicidal efficacy of sterilization processes applying gaseous hydrogen peroxide (H2O2). The sensor is based on interdigitated electrode structures (IDEs) that have been fabricated by means of thin-film technologies. Impedimetric measurements are applied to study the effect of sterilization process on spores of Bacillus atrophaeus. This resilient microorganism is commonly used in industry to proof the sterilization efficiency. The sensor measurements are accompanied by conventional microbiological challenge tests, as well as morphological characterizations with scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The sensor measurements are correlated with the microbiological test routines. In both methods, namely the sensor-based and microbiological one, a tailing effect has been observed. The results are evaluated and discussed in a three-dimensional calibration plot demonstrating the sensor's suitability to enable a rapid process decision in terms of a successfully performed sterilization.},
  language  = {en}
}
@article{BoeckerKuwertLangenetal.1994,
  author    = {Boecker, Henning and Kuwert, Torsten and Langen, Karl-J. and Lange, Herwig W. and Czech, Norbert and Ziemons, Karl and Herzog, Hans and Shikare, Shekar and Weindl, Anton and Feinendegen, Ludwig E.},
  title     = {SPECT with HMPAO compared to PET with FDG in Huntington disease},
  series = {Journal of Computer Assisted Tomography},
  volume    = {18},
  journal   = {Journal of Computer Assisted Tomography},
  number    = {4},
  isbn      = {1532-3145},
  pages     = {542 -- 548},
  year      = {1994},
  language  = {en}
}
@article{TuraliyevaYeshibaevSaparbekovaetal.2016,
  author    = {Turaliyeva, M. and Yeshibaev, A. and Saparbekova, A. and Akynova, L. and Abildayeva, R. and Sadenova, M. and Sartayeva, K. and Schieffer, Andre and Digel, Ilya},
  title     = {Species composition and injuriousness of stranger xylophilous fauna affecting indigenous urban dendroflora of Central Asia},
  series = {Asian journal of microbiology, biotechnology \& environmental sciences : AJMBES},
  volume    = {18},
  journal   = {Asian journal of microbiology, biotechnology \& environmental sciences : AJMBES},
  number    = {2},
  publisher = {EM International},
  issn      = {0972-3005},
  pages     = {359 -- 366},
  year      = {2016},
  abstract  = {At the present time, one of the most serious environmental problems of Central Asia and South Kazakhstan is the ongoing large-scale deterioration of principal urban tree populations. Several major centers of massive spread of invasive plant pests have been found in urban dendroflora of this region. The degree of damage of seven most wide-spread aboriginal tree species was found to range from 21.4±1.1 to 85.4±1.8\%. In particular, the integrity of the native communities of sycamore (Platanus spp.), willow (Salix spp.), poplar (Populus spp.) and elm (Ulmus spp.) is highly endangered. Our taxonomic analysis of the most dangerous tree pests of the region has revealed them as neobiontic xylophilous insects such as Cossus cossus L. (Order: Lepidoptera L.) Monochamus urussovi Fisch., Monochamus sutor L., Acanthocinus aedelis L. and {\~N}etonia aureate L. (Order: Coleoptera L.). We relate the origin of this threatening trend with the import of industrial wood in the mid 90’s of the last century that was associated with high degree of the constructional work in the region. Because of the absence of efficient natural predators of the pest species, the application of microbiological methods of the pest control and limitation is suggested.},
  language  = {en}
}
@misc{AbdelghaniMenaaObareetal.2013,
  author    = {Abdelghani, Adnane and Menaa, Bouzid and Obare, Sherine O. and Sch{\"o}ning, Michael Josef},
  title     = {Special issue on nanoscale science and technology / guest eds.: Adnane Abdelghani, Bouzid Menaa, Sherine O. Obare, Michael J. Sch{\"o}ning},
  series = {International journal of nanotechnology},
  volume    = {Vol. 10},
  journal   = {International journal of nanotechnology},
  number    = {No. 5-7},
  issn      = {1741-8151 (E-Journal), 1475-7435 (Print)},
  pages     = {373 -- 619},
  year      = {2013},
  language  = {en}
}
@article{BornheimGriegerBlanecketal.2024,
  author    = {Bornheim, Tobias and Grieger, Niklas and Blaneck, Patrick Gustav and Bialonski, Stephan},
  title     = {Speaker Attribution in German Parliamentary Debates with QLoRA-adapted Large Language Models},
  series = {Journal for language technology and computational linguistics : JLCL},
  volume    = {37},
  journal   = {Journal for language technology and computational linguistics : JLCL},
  number    = {1},
  publisher = {Gesellschaft f{\"u}r Sprachtechnologie und Computerlinguistik},
  address   = {Regensburg},
  issn      = {2190-6858},
  doi       = {10.21248/jlcl.37.2024.244},
  pages     = {13 Seiten},
  year      = {2024},
  abstract  = {The growing body of political texts opens up new opportunities for rich insights into political dynamics and ideologies but also increases the workload for manual analysis. Automated speaker attribution, which detects who said what to whom in a speech event and is closely related to semantic role labeling, is an important processing step for computational text analysis. We study the potential of the large language model family Llama 2 to automate speaker attribution in German parliamentary debates from 2017-2021. We fine-tune Llama 2 with QLoRA, an efficient training strategy, and observe our approach to achieve competitive performance in the GermEval 2023 Shared Task On Speaker Attribution in German News Articles and Parliamentary Debates. Our results shed light on the capabilities of large language models in automating speaker attribution, revealing a promising avenue for computational analysis of political discourse and the development of semantic role labeling systems.},
  language  = {en}
}
@article{DiktaHausmannSchmidt2002,
  author    = {Dikta, Gerhard and Hausmann, Rolf and Schmidt, Christian},
  title     = {Some Simulation Results under Random Censorship Models},
  pages     = {1 -- 12},
  year      = {2002},
  language  = {en}
}
@article{StulpeSinger1990,
  author    = {Stulpe, Werner and Singer, Matthias},
  title     = {Some Remarks on the Determination of Quantum States by Measurements},
  series = {Foundations of Physics Letters. 3 (1990), H. 2},
  journal   = {Foundations of Physics Letters. 3 (1990), H. 2},
  isbn      = {1572-9524},
  pages     = {153 -- 166},
  year      = {1990},
  language  = {en}
}
@article{Stulpe1994,
  author    = {Stulpe, Werner},
  title     = {Some Remarks on Classical Representations of Quantum Mechanics},
  series = {Foundations of Physics . 24 (1994), H. 7},
  journal   = {Foundations of Physics . 24 (1994), H. 7},
  isbn      = {1572-9516},
  pages     = {1089 -- 1094},
  year      = {1994},
  language  = {en}
}
@inproceedings{DigelTemizArtmannNojimaetal.2003,
  author    = {Digel, Ilya and Temiz Artmann, Ayseg{\"u}l and Nojima, H. and Artmann, Gerhard},
  title     = {Some peculiarities of application of cluster ions generated by plasma in respect of indoor air purification :[abstract]},
  year      = {2003},
  abstract  = {Recently, the SHARP Corporation, Japan, has developed the world's first "Plasma Cluster Ions (PCI)" air purification technology using plasma discharge to generate cluster ions. The new plasma cluster device releases positive and negative ions into the air, which are able to decompose and deactivate harmful airborne substances by chemical reactions. Because cluster ions consist of positive and negative ions that normally exist in the natural world, they are completely harmless and safe to humans. The amount of ozone generated by cluster ions is less than 0.01 ppm, which is significantly less than the 0.05-ppm standard for industrial operations and consumer electronics. This amount, thus, has no harming effects whatsoever on the human body. But particular properties and chemical processes in PCI treatment are still under study. It has been shown that PCI in most cases show strongly pronounced irreversible killing effects in respect of airborne microflora due to free-radical induced reactions and can be considered as a potent technology to disinfect both home, medical and industrial appliances.},
  subject      = {Clusterion},
  language  = {en}
}
@article{Staat2002,
  author    = {Staat, Manfred},
  title     = {Some Achievements of the European Project LISA for FEM Based Limit and Shakedown Analysis},
  series = {Computational mechanics : developments and applications, 2002 : presented at the 2002 ASME Pressure Vessels and Piping Conference, Vancouver, British Columbia, Canada, August 5 - 9. / Badie, N. [ed]},
  journal   = {Computational mechanics : developments and applications, 2002 : presented at the 2002 ASME Pressure Vessels and Piping Conference, Vancouver, British Columbia, Canada, August 5 - 9. / Badie, N. [ed]},
  publisher = {American Society of Mechanical Engineers},
  address   = {New York},
  isbn      = {0791846520},
  pages     = {177 -- 185},
  year      = {2002},
  language  = {en}
}
@article{VlasovMourzinaLeginetal.2002,
  author    = {Vlasov, Y. G. and Mourzina, Y. G. and Legin, A. V. and Ermelenko, Y. E. and Schubert, J. and Sch{\"o}ning, Michael Josef and L{\"u}th, H.},
  title     = {Solid-state thin film sensors based on chalcogenide materials prepared by planar technology and pulsed laser deposition},
  series = {Russian Journal of Applied Chemistry. 75 (2002), H. 3},
  journal   = {Russian Journal of Applied Chemistry. 75 (2002), H. 3},
  isbn      = {1070-4272},
  pages     = {351 -- 356},
  year      = {2002},
  language  = {en}
}
@inproceedings{SchreiberHirtbachKraftetal.2013,
  author    = {Schreiber, Marc and Hirtbach, Stefan and Kraft, Bodo and Steinmetzler, Andreas},
  title     = {Software in the city: visual guidance through large scale software projects},
  series = {Software Engineering 2013 : Fachtagung des GI-Fachbereichs Softwaretechnik, 26. Februar-1. M{\"a}rz 2013 in Aachen. (GI-Edition ; 213)},
  booktitle = {Software Engineering 2013 : Fachtagung des GI-Fachbereichs Softwaretechnik, 26. Februar-1. M{\"a}rz 2013 in Aachen. (GI-Edition ; 213)},
  editor    = {Kowalewski, Stefan},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-607-7 ; 978-3-88579-609-1},
  pages     = {213 -- 224},
  year      = {2013},
  language  = {en}
}
@article{StaatBaroudTopcuetal.2008,
  author    = {Staat, Manfred and Baroud, G. and Topcu, M. and Sponagel, Stefan},
  title     = {Soft Materials in Technology and Biology - Characteristics, Properties, and Parameter Identification},
  series = {Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)},
  journal   = {Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-75408-4},
  pages     = {253 -- 315},
  year      = {2008},
  language  = {en}
}
@article{VoegeleRuebbelkeGovorukhaetal.2019,
  author    = {V{\"o}gele, Stefan and R{\"u}bbelke, Dirk and Govorukha, Kristina and Grajewski, Matthias},
  title     = {Socio-technical scenarios for energy-intensive industries: the future of steel production in Germany},
  series = {Climatic Change},
  journal   = {Climatic Change},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0165-0009},
  doi       = {10.1007/s10584-019-02366-0},
  pages     = {1 -- 16},
  year      = {2019},
  language  = {en}
}
@article{SanderCzajkowskiFosteretal.2002,
  author    = {Sander, Volker and Czajkowski, K. and Foster, I. and Kesselman, C.},
  title     = {SNAP: A Protocol for Negotiating Service Level Agreements and Coordinating Resource Management in Distributed Systems / Czajkowski, K. ; Foster, I. ; Kesselman, C. ; Sander, V. ; Tuecke, S.},
  series = {Job Scheduling Strategies for Parallel Processing : 8th InternationalWorkshop, JSSPP 2002 Edinburgh, Scotland, UK, July 24, 2002. Revised Papers},
  journal   = {Job Scheduling Strategies for Parallel Processing : 8th InternationalWorkshop, JSSPP 2002 Edinburgh, Scotland, UK, July 24, 2002. Revised Papers},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-00172-7},
  pages     = {153 -- 183},
  year      = {2002},
  language  = {en}
}
@inproceedings{StaatDuong2016,
  author    = {Staat, Manfred and Duong, Minh Tuan},
  title     = {Smoothed Finite Element Methods for Nonlinear Solid Mechanics Problems: 2D and 3D Case Studies},
  series = {Proceedings of the National Science and Technology Conference on Mechanical - Transportation Engineering (NSCMET 2016), 13th October 2016, Hanoi, Vietnam, Vol.2},
  booktitle = {Proceedings of the National Science and Technology Conference on Mechanical - Transportation Engineering (NSCMET 2016), 13th October 2016, Hanoi, Vietnam, Vol.2},
  pages     = {440 -- 445},
  year      = {2016},
  abstract  = {The Smoothed Finite Element Method (SFEM) is presented as an edge-based and a facebased techniques for 2D and 3D boundary value problems, respectively. SFEMs avoid shortcomings of the standard Finite Element Method (FEM) with lower order elements such as overly stiff behavior, poor stress solution, and locking effects. Based on the idea of averaging spatially the standard strain field of the FEM over so-called smoothing domains SFEM calculates the stiffness matrix for the same number of degrees of freedom (DOFs) as those of the FEM. However, the SFEMs significantly improve accuracy and convergence even for distorted meshes and/or nearly incompressible materials. Numerical results of the SFEMs for a cardiac tissue membrane (thin plate inflation) and an artery (tension of 3D tube) show clearly their advantageous properties in improving accuracy particularly for the distorted meshes and avoiding shear locking effects.},
  language  = {en}
}
@article{DadfarCamozziDarguzyteetal.2020,
  author    = {Dadfar, Dryed Mohammadali and Camozzi, Denise and Darguzyte, Milita and Roemhild, Karolin and Varvar{\`a}, Paola and Metselaar, Josbert and Banala, Srinivas and Straub, Marcel and G{\"u}ver, Nihan and Engelmann, Ulrich M. and Slabu, Ioana and Buhl, Miriam and Leusen, Jan van and K{\"o}gerler, Paul and Hermanns-Sachweh, Benita and Schulz, Volkmar and Kiessling, Fabian and Lammers, Twan},
  title     = {Size-isolation of superparamagnetic iron oxide nanoparticles improves MRI, MPI and hyperthermia performance},
  series = {Journal of Nanobiotechnology},
  volume    = {18},
  journal   = {Journal of Nanobiotechnology},
  number    = {Article number 22},
  publisher = {Nature Portfolio},
  issn      = {1477-3155},
  doi       = {10.1186/s12951-020-0580-1},
  pages     = {1 -- 13},
  year      = {2020},
  abstract  = {Superparamagnetic iron oxide nanoparticles (SPION) are extensively used for magnetic resonance imaging (MRI) and magnetic particle imaging (MPI), as well as for magnetic fluid hyperthermia (MFH). We here describe a sequential centrifugation protocol to obtain SPION with well-defined sizes from a polydisperse SPION starting formulation, synthesized using the routinely employed co-precipitation technique. Transmission electron microscopy, dynamic light scattering and nanoparticle tracking analyses show that the SPION fractions obtained upon size-isolation are well-defined and almost monodisperse. MRI, MPI and MFH analyses demonstrate improved imaging and hyperthermia performance for size-isolated SPION as compared to the polydisperse starting mixture, as well as to commercial and clinically used iron oxide nanoparticle formulations, such as Resovist® and Sinerem®. The size-isolation protocol presented here may help to identify SPION with optimal properties for diagnostic, therapeutic and theranostic applications.},
  language  = {en}
}
@article{Ackermann1996,
  author    = {Ackermann, Hans-Josef},
  title     = {Single chip hardware support for rasterization and texture mapping},
  series = {Computers \& graphics : CAG ; an international journal of applications in computer graphics. 20 (1996), H. 4},
  journal   = {Computers \& graphics : CAG ; an international journal of applications in computer graphics. 20 (1996), H. 4},
  isbn      = {0097-8493},
  pages     = {503 -- 514},
  year      = {1996},
  language  = {en}
}
@article{FuruichiYoshinobuErmelenkoetal.2001,
  author    = {Furuichi, K. and Yoshinobu, T. and Ermelenko, T. and Mourzina, Y. and Iwasaki, H. and Sch{\"o}ning, Michael Josef},
  title     = {Simultaneous visualization of multiple ions by the chemical imaging sensor},
  series = {Proceedings of the 5th East Asian Conference on Chemical Sensors; the 33rd Chemical Sensor Symposium : December 4 - 7, 2001, Huis Ten Bosch, Sasebo-shi, Nagasaki, Japan / Japan Association of Chemical Sensors; the Electrochemical Society of Japan},
  journal   = {Proceedings of the 5th East Asian Conference on Chemical Sensors; the 33rd Chemical Sensor Symposium : December 4 - 7, 2001, Huis Ten Bosch, Sasebo-shi, Nagasaki, Japan / Japan Association of Chemical Sensors; the Electrochemical Society of Japan},
  publisher = {Japan Association of Chemical Sensors},
  address   = {Kasuga, Fukuoka-ken},
  pages     = {399 -- 401},
  year      = {2001},
  language  = {en}
}
@article{TurekHeidenGuoetal.2010,
  author    = {Turek, Monik and Heiden, Wolfgang and Guo, Sharon and Riesen, Alfred and Schubert, J{\"u}rgen and Zander, Willi and Kr{\"u}ger, Peter and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Simultaneous detection of cyanide and heavy metals for environmental analysis by means of µISEs},
  series = {Physica Status Solidi (A). 207 (2010), H. 4},
  journal   = {Physica Status Solidi (A). 207 (2010), H. 4},
  isbn      = {1862-6300},
  pages     = {817 -- 823},
  year      = {2010},
  language  = {en}
}
@inproceedings{KolditzAlbinFasseetal.2015,
  author    = {Kolditz, Melanie and Albin, Thivaharan and Fasse, Alessandro and Br{\"u}ggemann, Gert-Peter and Abel, Dirk and Albracht, Kirsten},
  title     = {Simulative Analysis of Joint Loading During Leg Press Exercise for Control Applications},
  series = {IFAC-PapersOnLine},
  volume    = {48},
  booktitle = {IFAC-PapersOnLine},
  number    = {20},
  doi       = {10.1016/j.ifacol.2015.10.179},
  pages     = {435 -- 440},
  year      = {2015},
  language  = {en}
}
@inproceedings{OlderogMohrBegingetal.2021,
  author    = {Olderog, M. and Mohr, P. and Beging, Stefan and Tsoumpas, C. and Ziemons, Karl},
  title     = {Simulation study on the role of tissue-scattered events in improving sensitivity for a compact time of flight compton positron emission tomograph},
  series = {2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)},
  booktitle = {2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)},
  publisher = {IEEE},
  isbn      = {978-1-7281-7693-2},
  doi       = {10.1109/NSS/MIC42677.2020.9507901},
  pages     = {4 Seiten},
  year      = {2021},
  abstract  = {In positron emission tomography improving time, energy and spatial detector resolutions and using Compton kinematics introduces the possibility to reconstruct a radioactivity distribution image from scatter coincidences, thereby enhancing image quality. The number of single scattered coincidences alone is in the same order of magnitude as true coincidences. In this work, a compact Compton camera module based on monolithic scintillation material is investigated as a detector ring module. The detector interactions are simulated with Monte Carlo package GATE. The scattering angle inside the tissue is derived from the energy of the scattered photon, which results in a set of possible scattering trajectories or broken line of response. The Compton kinematics collimation reduces the number of solutions. Additionally, the time of flight information helps localize the position of the annihilation. One of the questions of this investigation is related to how the energy, spatial and temporal resolutions help confine the possible annihilation volume. A comparison of currently technically feasible detector resolutions (under laboratory conditions) demonstrates the influence on this annihilation volume and shows that energy and coincidence time resolution have a significant impact. An enhancement of the latter from 400 ps to 100 ps leads to a smaller annihilation volume of around 50\%, while a change of the energy resolution in the absorber layer from 12\% to 4.5\% results in a reduction of 60\%. The inclusion of single tissue-scattered data has the potential to increase the sensitivity of a scanner by a factor of 2 to 3 times. The concept can be further optimized and extended for multiple scatter coincidences and subsequently validated by a reconstruction algorithm.},
  language  = {en}
}
@inproceedings{StreunAlKaddoumParletal.2012,
  author    = {Streun, M. and Al-Kaddoum, R. and Parl, C. and Pietrzyk, U. and Ziemons, Karl and Waasen, S. van},
  title     = {Simulation studies of optical photons in monolithic block scintillators},
  series = {2011 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)},
  booktitle = {2011 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-4673-0120-6 (electronic ISBN)},
  doi       = {10.1109/NSSMIC.2011.6154621},
  pages     = {1380 -- 1382},
  year      = {2012},
  abstract  = {The interest in PET detectors with monolithic block scintillators is growing. In order to obtain high spatial resolutions dedicated positioning algorithms are required. But even an ideal algorithm can only deliver information which is provided by the detector. In this simulation study we investigated the light distribution on one surface of cuboid LSO scintillators of different size. Scintillators with a large aspect ratio (small footprint and large height) showed significant position information only for a minimum interaction depth of the gamma particle. The results allow a quantitative estimate for a useful aspect ratio.},
  language  = {en}
}
@inproceedings{BehbahaniRibleMoulinecetal.2015,
  author    = {Behbahani, Mehdi and Rible, Sebastian and Moulinec, Charles and Fournier, Yvan and Nicolai, Mike and Crosetto, Paolo},
  title     = {Simulation of the FDA Centrifugal Blood Pump Using High Performance Computing},
  series = {World Academy of Science, Engineering and Technology International Journal of Mechanical and Mechatronics Engineering},
  volume    = {9},
  booktitle = {World Academy of Science, Engineering and Technology International Journal of Mechanical and Mechatronics Engineering},
  number    = {5},
  year      = {2015},
  language  = {en}
}
@article{SchaeferMende1988,
  author    = {Sch{\"a}fer, Horst and Mende, H. H.},
  title     = {Simulation of stray-field coupling between stacked grain-orientedthree-percent SiFe sheets concerning domain structure and stray-fieldprofile},
  series = {IEEE Transactions on Magnetics. 24 (1988), H. 1},
  journal   = {IEEE Transactions on Magnetics. 24 (1988), H. 1},
  isbn      = {0018-9464},
  pages     = {631 -- 634},
  year      = {1988},
  language  = {en}
}
@inproceedings{FrotscherGossmannTemizArtmannetal.2013,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {1st International Conference "Shell and Membrane Theories in Mechanics and Biology: From Macro- to Nanoscale Structures", Minsk, Belarus, Sept. 16-20, 2013},
  booktitle = {1st International Conference "Shell and Membrane Theories in Mechanics and Biology: From Macro- to Nanoscale Structures", Minsk, Belarus, Sept. 16-20, 2013},
  publisher = {Verl. d. Weißruss. Staatl. Univ.},
  address   = {Minsk},
  organization    = {International Conference Shell and Membrane Theories in Mechanics and Biology: From Macro- to Nanoscale Structures <1, 2013, Minsk>},
  isbn      = {978-985-553-135-8},
  pages     = {165 -- 167},
  year      = {2013},
  language  = {en}
}
@incollection{FrotscherGossmannRaatschenetal.2015,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Raatschen, Hans-J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  booktitle = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-319-02534-6 ; 978-3-319-02535-3},
  pages     = {187 -- 212},
  year      = {2015},
  abstract  = {We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.},
  language  = {en}
}
@article{BehbahaniNicolaiProbstetal.2007,
  author    = {Behbahani, Mehdi and Nicolai, M. and Probst, M. and Behr, M.},
  title     = {Simulation of Blood Flow in a Ventricular Assist Device},
  series = {inSIDE. 5 (2007), H. 1},
  journal   = {inSIDE. 5 (2007), H. 1},
  pages     = {28 -- 31},
  year      = {2007},
  language  = {en}
}
@inproceedings{KremersPieper2015,
  author    = {Kremers, Alexander and Pieper, Martin},
  title     = {Simulation and Verification of Bionic Heat Exchangers with COMSOL Multiphysics® Software},
  series = {COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France},
  booktitle = {COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France},
  publisher = {COMSOL},
  address   = {G{\"o}ttingen ; Berlin},
  pages     = {6 Seiten},
  year      = {2015},
  language  = {en}
}
@article{JildehWagnerSchoeningetal.2015,
  author    = {Jildeh, Zaid B. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Pieper, Martin},
  title     = {Simulating the electromagnetic-thermal treatment of thin aluminium layers for adhesion improvement},
  series = {Physica status solidi (a)},
  volume    = {Vol. 212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431893},
  pages     = {1234 -- 1241},
  year      = {2015},
  abstract  = {A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.},
  language  = {en}
}
@inproceedings{FrotscherDuongStaat2015,
  author    = {Frotscher, Ralf and Duong, Minh Tuan and Staat, Manfred},
  title     = {Simulating beating cardiomyocytes with electromechanical coupling},
  series = {II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)},
  booktitle = {II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)},
  organization    = {International Conference on Biomedical Technology <2, 2015, Hannover>},
  pages     = {1 -- 2},
  year      = {2015},
  language  = {en}
}
@inproceedings{BarekFischerNavratiletal.2006,
  author    = {Barek, Jiri and Fischer, Jan and Navratil, Tomas and Peckova, Karolina and Yosypchuk, Bogdan},
  title     = {Silver solid amalgam electrodes as sensors for chemical carcinogens},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1554},
  year      = {2006},
  abstract  = {The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte.},
  subject      = {Biosensor},
  language  = {en}
}
@article{Schoening2003,
  author    = {Sch{\"o}ning, Michael Josef},
  title     = {Silicon-based field-effect structures - From dielectrics to bioelectronics},
  series = {Dielectrics in emerging technologies : proceedings of the international symposium ; [papers presented at the First International Symposium on Science and Technology of Dielectrics in Emerging Fields held from 27th April to 2nd May 2003 in Paris, France] / sponsoring divisions: Dielectric Science and Technology, Electronics. Ed.: D. Misra.},
  journal   = {Dielectrics in emerging technologies : proceedings of the international symposium ; [papers presented at the First International Symposium on Science and Technology of Dielectrics in Emerging Fields held from 27th April to 2nd May 2003 in Paris, France] / sponsoring divisions: Dielectric Science and Technology, Electronics. Ed.: D. Misra.},
  publisher = {Electrochemical Society},
  address   = {Pennington, NJ},
  isbn      = {1-56677-346-6},
  pages     = {31 -- 37},
  year      = {2003},
  language  = {en}
}
@article{SchoeningPoghossian2009,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Silicon-based field-effect devices with nanostructured surfaces for bio-/chemical sensing},
  series = {Semiconductor micro- and nanoelectronics : Proceedings of the Seventh International Conference , Tsakhcadzor, Armenia July 3-5 2009},
  journal   = {Semiconductor micro- and nanoelectronics : Proceedings of the Seventh International Conference , Tsakhcadzor, Armenia July 3-5 2009},
  pages     = {51 -- 53},
  year      = {2009},
  language  = {en}
}
@article{SchoeningPoghossian2008,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Silicon-based field-effect devices for (bio-)chemical sensing},
  series = {International Conference on Advanced Semiconductor Devices and Microsystems, 2008. ASDAM 2008},
  journal   = {International Conference on Advanced Semiconductor Devices and Microsystems, 2008. ASDAM 2008},
  address   = {Smolenice, Slovakia},
  isbn      = {978-1-4244-2325-5},
  pages     = {31 -- 38},
  year      = {2008},
  language  = {en}
}
@incollection{PoghossianSchoening2006,
  author    = {Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Silicon-based chemical and biological field-effect sensors},
  series = {Encyclopedia of Sensors. Vol. 9 S - Sk},
  booktitle = {Encyclopedia of Sensors. Vol. 9 S - Sk},
  publisher = {ASP, American Scientific Publ.},
  address   = {Stevenson Ranch, Calif.},
  isbn      = {1-58883-065-9},
  pages     = {463 -- 534},
  year      = {2006},
  language  = {en}
}
@article{Schoening2003,
  author    = {Sch{\"o}ning, Michael Josef},
  title     = {Silicon-based biochemical sensors},
  series = {CNI - The Center of Nanoelectronic Systems for Information Technology},
  journal   = {CNI - The Center of Nanoelectronic Systems for Information Technology},
  publisher = {Foschungszentrum J{\"u}lich},
  pages     = {165 -- 170},
  year      = {2003},
  language  = {en}
}
@article{Schoening2000,
  author    = {Sch{\"o}ning, Michael Josef},
  title     = {Silicon recognizes biochemical parameters: Microchips for analytical sensor applications},
  series = {American Laboratory. 32 (2000), H. 16},
  journal   = {American Laboratory. 32 (2000), H. 16},
  isbn      = {0044-7749},
  pages     = {24 -- 31},
  year      = {2000},
  language  = {en}
}
@article{SchoeningKloockKnobbeetal.2004,
  author    = {Sch{\"o}ning, Michael Josef and Kloock, Joachim P. and Knobbe, D.-T. and R{\"a}de, J. and Keusgen, M.},
  title     = {Silicon field-effect biosensor for cyanide detection},
  series = {Technical digest of the 10th International Meeting on Chemical Sensors, July 11 - 14, 2004, Tsukuba, Japan / Japan Association of Chemical Sensors},
  journal   = {Technical digest of the 10th International Meeting on Chemical Sensors, July 11 - 14, 2004, Tsukuba, Japan / Japan Association of Chemical Sensors},
  publisher = {Japan Association of Chemical Sensors},
  address   = {Fukuoka},
  pages     = {98 -- 99},
  year      = {2004},
  language  = {en}
}
@inproceedings{BhattaraiFrotscherStaat2016,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Staat, Manfred},
  title     = {Significance of fibre geometry on passive-active response of pelvic muscles to evaluate pelvic dysfunction},
  series = {BioMedWomen: Proceedings of the international conference on clinical and bioengineering for women's health},
  booktitle = {BioMedWomen: Proceedings of the international conference on clinical and bioengineering for women's health},
  editor    = {Natal Jorge, Renato},
  publisher = {CRC Press},
  address   = {Boca Raton},
  isbn      = {978-1-138-02910-1},
  pages     = {185 -- 188},
  year      = {2016},
  language  = {en}
}
@article{HillenSchmittBockemuehl1995,
  author    = {Hillen, Walter and Schmitt, W. and Bockem{\"u}hl, J.},
  title     = {Signal-to-Noise Performance of a digital dental X-ray Detector},
  series = {Computer assisted radiology : proceedings of the International Symposium on Computer and Communication Systems for Image Guided Diagnosis and Therapy / CAR '95 Berlin, June 21 - 24, 1995. Ed. by H. U. Lemke},
  journal   = {Computer assisted radiology : proceedings of the International Symposium on Computer and Communication Systems for Image Guided Diagnosis and Therapy / CAR '95 Berlin, June 21 - 24, 1995. Ed. by H. U. Lemke},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-59177-X},
  pages     = {LXXIV, 1442 S. : Ill., graph. Darst.},
  year      = {1995},
  language  = {en}
}
@article{HillenEckenbachQuadfliegetal.1991,
  author    = {Hillen, Walter and Eckenbach, W. and Quadflieg, Peter and Zaengel, Thomas T.},
  title     = {Signal-to-noise performance of a CsI fluorescent screen},
  series = {Medical Imaging V: Image physics},
  journal   = {Medical Imaging V: Image physics},
  isbn      = {0-8194-0538-8},
  pages     = {120 -- 131},
  year      = {1991},
  language  = {en}
}