@inproceedings{HerrmannWorringerGraeteretal.2006,
  author    = {Herrmann, Ulf and Worringer, S. and Graeter, F. and Nava, P.},
  title     = {Three Years of Operation Experience of the SKAL-ET Collector Loop at SEGS V},
  series = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies, June 20 - 23, 2006, Seville, Spain},
  booktitle = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies, June 20 - 23, 2006, Seville, Spain},
  editor    = {Romero, Manuel},
  publisher = {SolarPACES [u.a.]},
  address   = {[s.l.]},
  isbn      = {84-7834-519-1},
  pages     = {1 CD-ROM},
  year      = {2006},
  language  = {en}
}
@inproceedings{KloockSchubertErmelenkoetal.2006,
  author    = {Kloock, Joachim P. and Schubert, J. and Ermelenko, Y. and Vlasov, Y. G. and Bratov, A. and Sch{\"o}ning, Michael Josef},
  title     = {Thin-film sensors with chalcogenide glass materials - a general survey},
  series = {Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...},
  booktitle = {Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...},
  address   = {Warsaw},
  pages     = {92 -- 97},
  year      = {2006},
  language  = {en}
}
@article{HoffschmidtBeckerFend2006,
  author    = {Hoffschmidt, Bernhard and Becker, M. and Fend, Thomas},
  title     = {Theoretical and numerical investigation of flow stability in porous materials applied as volumetric solar receivers / M. Becker ; T. Fend ; B. Hoffschmidt ...},
  series = {Solar energy. 80 (2006), H. 10},
  journal   = {Solar energy. 80 (2006), H. 10},
  isbn      = {0038-092X},
  pages     = {1241 -- 1248},
  year      = {2006},
  language  = {en}
}
@article{MuellerVeggianMoroFerretietal.2006,
  author    = {M{\"u}ller-Veggian, Mattea and Moro, D. and Ferreti, A. and Colautti, P.},
  title     = {The new articulated twin mini TEPC},
  series = {Annual Report 2006 / Istituto Nazionale di Fisica Nucleare <Frascati> / Laboratori Nazionali <Legnaro>},
  journal   = {Annual Report 2006 / Istituto Nazionale di Fisica Nucleare <Frascati> / Laboratori Nazionali <Legnaro>},
  address   = {Legnaro},
  pages     = {273},
  year      = {2006},
  language  = {en}
}
@inproceedings{BallmannDafnisBraunetal.2006,
  author    = {Ballmann, Josef and Dafnis, Athanasios and Braun, Carsten and Korsch, Helge and Reimerdes, Hans-G{\"u}nther and Braun, Carsten and Ballmann, Josef},
  title     = {The HIRENASD project: High Reynolds number aerostructural dynamics experiments in the European Transonic Wind Tunnel (ETW)},
  series = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences},
  booktitle = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences},
  publisher = {Optimage},
  address   = {Edinburgh},
  organization    = {International Council of the Aeronautical Sciences (ICAS)},
  isbn      = {0-9533991-7-6},
  pages     = {Paper No. 2006-5.11.2},
  year      = {2006},
  language  = {en}
}
@article{StreunBrandenburgLarueetal.2006,
  author    = {Streun, M. and Brandenburg, G. and Larue, H. and Parl, C. and Ziemons, Karl},
  title     = {The data acquisition system of ClearPET neuro - a small animal PET scanner},
  series = {IEEE Transactions on Nuclear Science},
  volume    = {53},
  journal   = {IEEE Transactions on Nuclear Science},
  number    = {3},
  isbn      = {0018-9499},
  pages     = {700 -- 703},
  year      = {2006},
  abstract  = {The Crystal Clear Collaboration has developed a modular system for a small animal PET scanner (ClearPET). The modularity allows the assembly of scanners of different sizes and characteristics in order to satisfy the specific needs of the individual member institutions. The system performs depth of interaction detection by using a phoswich arrangement combining LSO and LuYAP scintillators which are coupled to Multichannel Photomultipliers (PMTs). For each PMT a free running 40 MHz ADC digitizes the signal and the complete scintillation pulse is sampled by an FPGA and sent with 20 MB/s to a PC for preprocessing. The pulse provides information about the gamma energy and the scintillator material which identifies the interaction layer. Furthermore, the exact pulse starting time is obtained from the sampled data. This is important as no hardware coincidence detection is implemented. All single events are recorded and coincidences are identified by software. The system in J{\"u}lich (ClearPET Neuro) is equipped with 10240 crystals on 80 PMTs. The paper will present an overview of the data acquisition system.},
  language  = {en}
}
@article{DethloffKrollLudwigs2006,
  author    = {Dethloff, Nina and Kroll-Ludwigs, Kathrin},
  title     = {The Constitutional Court as Driver of Reforms in German Family Law},
  series = {International Survey of Family Law},
  journal   = {International Survey of Family Law},
  pages     = {217 -- 234},
  year      = {2006},
  language  = {en}
}
@inproceedings{VedralWollertBudaetal.2006,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg and Buda, A. and Altrock, R.},
  title     = {The capability of bluetooth for real-time transmission in automation},
  series = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand},
  booktitle = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand},
  publisher = {Acta Pr.},
  address   = {Anaheim, Calif.},
  organization    = {International Association of Science and Technology for Development},
  pages     = {168 -- 175},
  year      = {2006},
  language  = {en}
}
@inproceedings{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006},
  year      = {2006},
  abstract  = {Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education - Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education - Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company - Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone - Set up your own business 2.5 Level 5: Grow to be Strong - Develop your business 2.6 Level 6: Competitive and independent - Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion},
  subject      = {Technologietransfer},
  language  = {en}
}
@misc{Staat2006,
  author    = {Staat, Manfred},
  title     = {Technische Mechanik. Vorlesungsmitschrift. Korrigierter Nachdr. der 3. Aufl.},
  year      = {2006},
  abstract  = {{\"U}berarbeitete, korrigierte und erg{\"a}nzte Version einer Vorlesungsmitschrift von Sebastian Kr{\"a}mer. 172 S. Inhaltsverzeichnis 0 Einf{\"u}hrung in die Mechanik 1 Statik starrer K{\"o}rper 2 Elastostatik (Festigkeitslehre) 3 Kinematik 4 Kinetik Literatur},
  subject      = {Technische Mechanik},
  language  = {de}
}
@article{Havermann2006,
  author    = {Havermann, Marc},
  title     = {Systematic Shock Tube Experiments on Vortex Ring Generation and Propagation / Havermann, M. ; Kainuma, M. ; Takayama, K.},
  series = {Shock waves : proceedings of the 25th International Symposium on Shock Waves-ISSW25, July 17 - 22, 2005, Bangalore, India / ed.: G. Jagadeesh},
  journal   = {Shock waves : proceedings of the 25th International Symposium on Shock Waves-ISSW25, July 17 - 22, 2005, Bangalore, India / ed.: G. Jagadeesh},
  publisher = {Universities Pr.},
  address   = {Hyderabad},
  isbn      = {978-81-7371571-6},
  pages     = {1141 S.},
  year      = {2006},
  language  = {en}
}
@inproceedings{PijanowskaRemiszewskaPederzollietal.2006,
  author    = {Pijanowska, Dorota G. and Remiszewska, Elzbieta and Pederzolli, Cecilia and Lunelli, Lorenzo and Vendano, Michele and Canteri, Roberto and Dudzinski, Konrad and Kruk, Jerzy and Torbicz, Wladyslaw},
  title     = {Surface modification for microreactor fabrication},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1480},
  year      = {2006},
  abstract  = {In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff's base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{SrivastavaSinghDhandetal.2006,
  author    = {Srivastava, Alok and Singh, Virendra and Dhand, Chetna and Kaur, Manindar and Singh, Tejvir and Witte, Katrin and Scherer, Ulrich W.},
  title     = {Study of swift heavy ion modified conduction polymer composites for application as gas sensor},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1345},
  year      = {2006},
  abstract  = {A polyaniline-based conducting composite was prepared by oxidative polymerisation of aniline in a polyvinylchloride (PVC) matrix. The coherent free standing thin films of the composite were prepared by a solution casting method. The polyvinyl chloride-polyaniline composites exposed to 120 MeV ions of silicon with total ion fluence ranging from 1011 to 1013 ions/cm2, were observed to be more sensitive towards ammonia gas than the unirradiated composite. The response time of the irradiated composites was observed to be comparably shorter. We report for the first time the application of swift heavy ion modified insulating polymer conducting polymer (IPCP) composites for sensing of ammonia gas.},
  subject      = {Biosensor},
  language  = {en}
}
@article{SchneiderSchneider2006,
  author    = {Schneider, Bettina and Schneider, Wilhelm},
  title     = {Studienfinanzierung: So kommt man an ein Stipendium},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Weiterbildung. 35 (2006), H. 12},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Weiterbildung. 35 (2006), H. 12},
  isbn      = {0340-3084},
  pages     = {1500 -- 1502},
  year      = {2006},
  language  = {de}
}
@book{BorchertSchemmKorth2006,
  author    = {Borchert, J{\"o}rg and Schemm, Ralf and Korth, Swen},
  title     = {Stromhandel: Institutionen, Marktmodelle, Pricing und Risikomanagement},
  publisher = {Sch{\"a}ffer-Poeschel},
  address   = {Stuttgart},
  isbn      = {978-3-7910-2542-1},
  pages     = {XXIII, 426 S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {de}
}
@book{Mueller2006,
  author    = {M{\"u}ller, Karsten},
  title     = {Strategien zur Zustandserfassung von Kanalisationen. Aachener Schriften zur Stadtentw{\"a}sserung. Bd 7},
  publisher = {Ges. zur F{\"o}rderung der Siedlungswasserwirtschaft an der RWTH Aachen},
  address   = {Aachen},
  isbn      = {978-3-938996-00-3},
  pages     = {IX, 178, 7 S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {de}
}
@book{KaminskyKallweitWeberetal.2006,
  author    = {Kaminsky, Radoslav and Kallweit, Stephan and Weber, Hans-Joachim and Simons, Antoine and Verdonck, Pascal},
  title     = {Stereo high speed PIV measurements behind two different artificial heart valves},
  pages     = {9 S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {en}
}
@techreport{ConanD'HaeyerBeguinetal.2006,
  author    = {Conan, Yulian and D'Haeyer, R. and B{\´e}guin, P. and D{\"o}ring, Bernd and Kuhnhenne, Markus and Bayo, E.},
  title     = {Steel in low-rise building : a symbiosis of cold formed sections and light rolled profiles : final report. Contract-No. 7215-PP/070. EUR 22080 en},
  publisher = {Office for Official Publications of the European Communities},
  address   = {Luxembourg},
  isbn      = {92-79-02082-X},
  pages     = {200 S.},
  year      = {2006},
  language  = {en}
}
@book{Weigand2006,
  author    = {Weigand, Christoph},
  title     = {Statistik mit und ohne Zufall : eine anwendungsorientierte Einf{\"u}hrung ; mit 10 Tabellen / Christoph Weigand},
  publisher = {Physica-Verl.},
  address   = {Heidelberg},
  isbn      = {3-7908-1693-0},
  pages     = {XIII, 421 S. : graph. Darst.},
  year      = {2006},
  language  = {de}
}
@article{KolymbasFellinKirsch2006,
  author    = {Kolymbas, Dimitrios and Fellin, W. and Kirsch, Ansgar},
  title     = {Squeezing due to stress relaxation in foliated rock},
  series = {International journal for numerical and analytical methods in geomechanics},
  volume    = {Vol. 30},
  journal   = {International journal for numerical and analytical methods in geomechanics},
  number    = {Iss. 13},
  issn      = {1096-9853 (E-Journal); 0363-9061 (Print)},
  doi       = {10.1002/nag.530},
  pages     = {1357 -- 1367},
  year      = {2006},
  language  = {en}
}
@article{HellwigVolkmann2006,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Some upper bounds for the domination number},
  series = {The journal of combinatorial mathematics and combinatorial computing : JCMCC},
  volume    = {Vol. 57},
  journal   = {The journal of combinatorial mathematics and combinatorial computing : JCMCC},
  issn      = {0835-3026},
  pages     = {187 -- 209},
  year      = {2006},
  language  = {en}
}
@inproceedings{Schwarzer2006,
  author    = {Schwarzer, Klemens},
  title     = {Solarthermisches Entsalzungssystem mit W{\"a}rmer{\"u}ckgewinnung - Erste Feldtestergebnisse},
  series = {16. Symposium Thermische Solarenergie : 17. bis 19. Mai 2006, Kloster Banz, Bad Staffelstein},
  booktitle = {16. Symposium Thermische Solarenergie : 17. bis 19. Mai 2006, Kloster Banz, Bad Staffelstein},
  publisher = {Ostbayer. Technologie-Transfer-Inst.},
  address   = {Regensburg},
  isbn      = {3-934681-45-X},
  pages     = {173 -- 178},
  year      = {2006},
  language  = {de}
}
@article{DachwaldKahleWie2006,
  author    = {Dachwald, Bernd and Kahle, Ralph and Wie, Bong},
  title     = {Solar Sailing Kinetic Energy Impactor (KEI) Mission Design Tradeoffs for Impacting and Deflecting Asteroid 99942 Apophis},
  series = {AIAA Guidance, Navigation, and Control Conference \& Exhibit - AIAA Atmospheric Flight Mechanics Conference \& Exhibit - AIAA Modeling and Simulation Technologies Conference \& Exhibit - AIAA/AAS Astrodynamics Specialist Conference \& Exhibit : [21 - 24 August 2006, Keystone, Colorado ; papers]. - (AIAA meeting papers on disc ; [11.]2006,19-20 )},
  journal   = {AIAA Guidance, Navigation, and Control Conference \& Exhibit - AIAA Atmospheric Flight Mechanics Conference \& Exhibit - AIAA Modeling and Simulation Technologies Conference \& Exhibit - AIAA/AAS Astrodynamics Specialist Conference \& Exhibit : [21 - 24 August 2006, Keystone, Colorado ; papers]. - (AIAA meeting papers on disc ; [11.]2006,19-20 )},
  publisher = {American Institute of Aeronautics and Astronautics},
  address   = {Reston, Va.},
  isbn      = {1-56347-802-1},
  pages     = {1 -- 20},
  year      = {2006},
  language  = {en}
}
@article{DachwaldOhndorfWie2006,
  author    = {Dachwald, Bernd and Ohndorf, A. and Wie, Bong},
  title     = {Solar Sail Trajectory Optimization for the Solar Polar Imager (SPI) Mission},
  series = {AIAA Guidance, Navigation, and Control Conference \& Exhibit - AIAA Atmospheric Flight Mechanics Conference \& Exhibit - AIAA Modeling and Simulation Technologies Conference \& Exhibit - AIAA/AAS Astrodynamics Specialist Conference \& Exhibit : [21 - 24 August 2006, Keystone, Colorado ; papers]. - (AIAA meeting papers on disc ; [11.]2006,19-20 )},
  journal   = {AIAA Guidance, Navigation, and Control Conference \& Exhibit - AIAA Atmospheric Flight Mechanics Conference \& Exhibit - AIAA Modeling and Simulation Technologies Conference \& Exhibit - AIAA/AAS Astrodynamics Specialist Conference \& Exhibit : [21 - 24 August 2006, Keystone, Colorado ; papers]. - (AIAA meeting papers on disc ; [11.]2006,19-20 )},
  publisher = {American Institute of Aeronautics and Astronautics},
  address   = {Reston, Va.},
  isbn      = {1-56347-802-1},
  pages     = {2 CD-ROMs.},
  year      = {2006},
  language  = {en}
}
@inproceedings{DachwaldKahleWie2006,
  author    = {Dachwald, Bernd and Kahle, Ralph and Wie, Bong},
  title     = {Solar sail Kinetic Energy Impactor (KEI) mission design tradeoffs for impacting and deflecting asteroid 99942 Apophis},
  series = {AIAA/AAS Astrodynamics Specialist Conference and Exhibit},
  booktitle = {AIAA/AAS Astrodynamics Specialist Conference and Exhibit},
  doi       = {10.2514/6.2006-6178},
  pages     = {1 -- 20},
  year      = {2006},
  abstract  = {Near-Earth asteroid 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several so-called gravitational keyholes during its 2029-encounter. Several pre-2029-deflection scenarios to prevent Apophis from doing this have been investigated so far. Because the keyholes are less than 1 km in size, a pre-2029 kinetic impact is clearly the best option because it requires only a small change in Apophis' orbit to nudge it out of a keyhole. A single solar sail Kinetic Energy Impactor (KEI) spacecraft that impacts Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages at about 0.75 AU would be a feasible option to do this. The spacecraft consists of a 160 m x 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. In this paper, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, solar sail Kinetic Energy Impactor (KEI) spacecraft are still a feasible option to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value. In this paper, we elaborate potential pre- and post-2029 KEI impact scenarios for a launch in 2020, and investigate tradeoffs between different mission parameters.},
  language  = {en}
}
@inproceedings{BarekFischerNavratiletal.2006,
  author    = {Barek, Jiri and Fischer, Jan and Navratil, Tomas and Peckova, Karolina and Yosypchuk, Bogdan},
  title     = {Silver solid amalgam electrodes as sensors for chemical carcinogens},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1554},
  year      = {2006},
  abstract  = {The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte.},
  subject      = {Biosensor},
  language  = {en}
}
@incollection{PoghossianSchoening2006,
  author    = {Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Silicon-based chemical and biological field-effect sensors},
  series = {Encyclopedia of Sensors. Vol. 9 S - Sk},
  booktitle = {Encyclopedia of Sensors. Vol. 9 S - Sk},
  publisher = {ASP, American Scientific Publ.},
  address   = {Stevenson Ranch, Calif.},
  isbn      = {1-58883-065-9},
  pages     = {463 -- 534},
  year      = {2006},
  language  = {en}
}
@inproceedings{LoebSchartnerSeboldtetal.2006,
  author    = {Loeb, Horst W. and Schartner, Karl-Heinz and Seboldt, Wolfgang and Dachwald, Bernd and Streppel, Joern and Meusemann, Hans and Sch{\"u}lke, Peter},
  title     = {SEP for a lander mission to the jovian moon europa},
  series = {57th International Astronautical Congress},
  booktitle = {57th International Astronautical Congress},
  doi       = {10.2514/6.IAC-06-C4.4.04},
  pages     = {1 -- 12},
  year      = {2006},
  abstract  = {Under DLR-contract, Giessen University and DLR Cologne are studying solar-electric propulsion missions (SEP) to the outer regions of the solar system. The most challenging reference mission concerns the transport of a 1.35-tons chemical lander spacecraft into an 80-RJ circular orbit around Jupiter, which would enable to place a 375 kg lander with 50 kg of scientific instruments on the surface of the icy moon "Europa". Thorough analyses show that the best solution in terms of SEP launch mass times thrusting time would be a two-stage EP module and a triple-junction solar array with concentrators which would be deployed step by step. Mission performance optimizations suggest to propel the spacecraft in the first EP stage by 6 gridded ion thrusters, running at 4.0 kV of beam voltage, which would save launch mass, and in the second stage by 4 thrusters with 1.25 to 1.5 kV of positive high voltage saving thrusting time. In this way, the launch mass of the spacecraft would be kept within 5.3 tons. Without a launcher's C3 and interplanetary gravity assists, Jupiter might be reached within about 4 yrs. The spiraling-down into the parking orbit would need another 1.8 yrs. This "large mission" can be scaled down to a smaller one, e.g., by halving all masses, the solar array power, and the number of thrusters. Due to their reliability, long lifetime and easy control, RIT-22 engines have been chosen for mission analysis. Based on precise tests, the thruster performance has been modeled.},
  language  = {en}
}
@incollection{KrollLudwigs2006,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Selbstverantwortung oder Vertrauenshaftung? - Anwendung von \S 311 II Nr. 1 BGB (c.i.c.) auf Ehevertr{\"a}ge und Angeh{\"o}rigenb{\"u}rgschaften},
  series = {Verantwortung und Haftung : Leipziger Tagung, 6. bis 9. September 2006 ; Jahrbuch Junger Zivilrechtswissenschaftler 2006 ; [17. Tagung der Gesellschaft Junger Zivilrechtswissenschaftler e.V.]},
  booktitle = {Verantwortung und Haftung : Leipziger Tagung, 6. bis 9. September 2006 ; Jahrbuch Junger Zivilrechtswissenschaftler 2006 ; [17. Tagung der Gesellschaft Junger Zivilrechtswissenschaftler e.V.]},
  editor    = {Staake, Marco},
  organization    = {Gesellschaft Junger Zivilrechtswissenschaftler},
  pages     = {118 -- 145},
  year      = {2006},
  language  = {de}
}
@inproceedings{ButenwegMistler2006,
  author    = {Butenweg, Christoph and Mistler, Michael},
  title     = {Seismic resistance of unreinforced masonry buildings},
  series = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <8, 2006, Las Palmas>},
  isbn      = {1-905088-06-X},
  doi       = {10.4203/ccp.83.9},
  pages     = {Paper 9},
  year      = {2006},
  language  = {en}
}
@article{KrebsbachSchillerBrunneretal.2006,
  author    = {Krebsbach, M. and Schiller, C. and Brunner, D. and G{\"u}nther, G. and Hegglin, M. I. and Mottaghy, Darius and Riese, M. and Spelten, N. and Wernli, H.},
  title     = {Seasonal cycles and variability of O_3 and H_2O in the UT/LMS during SPURT},
  series = {Atmospheric Chemistry and Physics},
  volume    = {6},
  journal   = {Atmospheric Chemistry and Physics},
  number    = {1},
  doi       = {10.5194/acp-6-109-2006},
  pages     = {109 -- 125},
  year      = {2006},
  language  = {en}
}
@misc{Junold2006,
  author    = {Junold, Thomas},
  title     = {Schwarz. Weiss. Ein dokumentierter Schriftentwurf},
  year      = {2006},
  abstract  = {Schwarz und Weiß. Schwarze Glyphen, weiße Gegenformen. Schwarze Zeilen, Weißraum als Gestaltungselement. Schwarze Schrift auf weißem Papier. Schrift als Kommunikationselement. Vereinheitlichte und vereinfachte Formen, dank Jahrhunderte langer Gew{\"o}hnung oder Experimentierfeld f{\"u}r Formen, die sich mit ver{\"a}ndernden Techniken gleichermaßen ver{\"a}ndern? Schrift als Vermittler von Emotionen oder reine Information. Was macht eine Schrift lesbar und was steht einer »Display-Schrift« gut zu Gesicht? Sind Schriftsippen mit {\"u}ber hundert Schnitten Anwenderfreundlich oder eher Grund f{\"u}r Verwirrung. Serifenschrift oder Sans-Serif? Was ist moderner? Sind wir Kinder der Helvetica oder der Frutiger oder eher Enkel der Garamond oder Bodoni? Kann man ein {\"a}sthetisches Empfinden f{\"u}r Schrift lernen? Eine Schrift als Beweis, ausgebaut f{\"u}r eine sinnvolle Verwendung, hinterfragt durch einen Markt schon w{\"a}hrend ihrer Entstehung. R{\"u}ckf{\"u}hrung und Begr{\"u}ndung der aufgef{\"u}hrten Fragen auf diese Schrift. Ein Diplom, das nachdenkt {\"u}ber Schrift, das Schrift anbietet, den Dialog mit Schrift fordert.},
  subject      = {Schriftkunst},
  language  = {de}
}
@article{Krause2006,
  author    = {Krause, Thomas},
  title     = {Schalung und Ger{\"u}ste},
  series = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].},
  journal   = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].},
  publisher = {Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8351-0002-2},
  pages     = {122 -- 131},
  year      = {2006},
  language  = {de}
}
@article{KrauseKremer2006,
  author    = {Krause, Thomas and Kremer, Norbert},
  title     = {Schalung und Ger{\"u}ste},
  series = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.},
  journal   = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.},
  publisher = {Teubner},
  address   = {Wiesbaden},
  isbn      = {3-519-65220-X},
  pages     = {709 -- 747},
  year      = {2006},
  language  = {de}
}
@article{Timme2006,
  author    = {Timme, Michael},
  title     = {Schadensersatzanspr{\"u}che gegen den Insolvenzverwalter wegen Nichterf{\"u}llung von Masseverbindlichkeiten im Prozess},
  series = {Monatsschrift f{\"u}r deutsches Recht : MdR ; Zeitschrift f{\"u}r die Zivilrechts-Praxis. 26 (2006), H. 24},
  journal   = {Monatsschrift f{\"u}r deutsches Recht : MdR ; Zeitschrift f{\"u}r die Zivilrechts-Praxis. 26 (2006), H. 24},
  isbn      = {0340-1812},
  pages     = {1381 -- 1383},
  year      = {2006},
  language  = {de}
}
@inproceedings{Tuerk2006,
  author    = {T{\"u}rk, Roman},
  title     = {Sanierung von Hausanschl{\"u}ssen},
  year      = {2006},
  abstract  = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 23-24. Zusammenfassung des Vortrags.},
  subject      = {Hausanschluss},
  language  = {de}
}
@misc{ErkKlefischStellbergetal.2006,
  author    = {Erk, Daniel and Klefisch, Andrea and Stellberg, Michael and Zimmer, Dirk},
  title     = {R{\"u}ckenlehne f{\"u}r einen Fahrzeugsitz},
  year      = {2006},
  language  = {de}
}
@inproceedings{KraftRetkowitz2006,
  author    = {Kraft, Bodo and Retkowitz, Daniel},
  title     = {Rule-Dependencies for Visual Knowledge Specification in Conceptual Design},
  year      = {2006},
  abstract  = {In: Proc. of the 11th Intl. Conf. on Computing in Civil and Building Engineering (ICCCBE-XI) ed. Hugues Rivard, Montreal, Canada, Seite 1-12, ACSE (CD-ROM), 2006 Currently, the conceptual design phase is not adequately supported by any CAD tool. Neither the support while elaborating conceptual sketches, nor the automatic proof of correctness with respect to effective restrictions is currently provided by any commercial tool. To enable domain experts to store the common as well as their personal domain knowledge, we develop a visual language for knowledge formalization. In this paper, a major extension to the already existing concepts is introduced. The possibility to define rule dependencies extends the expressiveness of the knowledge definition language and contributes to the usability of our approach.},
  subject      = {CAD},
  language  = {en}
}
@article{Paschmann2006,
  author    = {Paschmann, Hans},
  title     = {Robuste Fertigteile aus Glasfaserbeton},
  series = {BFT international : concrete plant + precast technology ; Betonwerk + Fertigteil-Technik . 72 (2006), H. 9},
  journal   = {BFT international : concrete plant + precast technology ; Betonwerk + Fertigteil-Technik . 72 (2006), H. 9},
  isbn      = {0373-4331},
  pages     = {36 -- 43},
  year      = {2006},
  language  = {de}
}
@article{FerreinLakemeyer2006,
  author    = {Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Roboterfußball - Wissenschaft, die auch Spass macht / Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {RWTH Themen (2006)},
  journal   = {RWTH Themen (2006)},
  isbn      = {0179-079X},
  pages     = {36 -- 39},
  year      = {2006},
  language  = {de}
}
@book{Baltzer2006,
  author    = {Baltzer, Wolfgang},
  title     = {Richtlinien f{\"u}r die Ausstattung und den Betrieb von Straßentunneln : RABT / Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, Arbeitsgruppe Verkehrsf{\"u}hrung und Verkehrssicherheit. [Arbeitsgruppe Verkehrsf{\"u}hrung und Verkehrssicherheit, Arbeitsausschuss Ausstattung und Betrieb von Straßentunneln. Leiter: Wolfgang Baltzer]. Ausg. 2006},
  publisher = {FGSV-Verl.},
  address   = {K{\"o}ln},
  isbn      = {3-937356-87-8},
  pages     = {67 S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {de}
}
@inproceedings{SakthivelWeppner2006,
  author    = {Sakthivel, Mariappan and Weppner, Werner},
  title     = {Response behaviour of a hydrogen sensor based on ionic conducting polymer-metal interfaces prepared by the chemical reduction method},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1399},
  year      = {2006},
  abstract  = {A solid-state amperometric hydrogen sensor based on a protonated Nafion membrane and catalytic active electrode operating at room temperature was fabricated and tested. Ionic conducting polymer-metal electrode interfaces were prepared chemically by using the impregnation-reduction method. The polymer membrane was impregnated with tetra-ammine platinum chloride hydrate and the metal ions were subsequently reduced by using either sodium tetrahydroborate or potassium tetrahydroborate. The hydrogen sensing characteristics with air as reference gas is reported. The sensors were capable of detecting hydrogen concentrations from 10 ppm to 10\% in nitrogen. The response time was in the range of 10-30 s and a stable linear current output was observed. The thin Pt films were characterized by XRD, Infrared Spectroscopy, Optical Microscopy, Atomic Force Microscopy, Scanning Electron Microscopy and EDAX.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{PauksztatKuperjansdeHesselle2006,
  author    = {Pauksztat, Anja and Kuperjans, Isabel and de Hesselle, M.},
  title     = {Referenzformeln f{\"u}r Energiebedarf und CO2-Emissionen in der Glasindustrie},
  series = {Energieeffizienz - Chancen f{\"u}r die Zukunft : Tagung Berlin, 14. und 15. November 2006. - (VDI-Berichte ; 1951)},
  booktitle = {Energieeffizienz - Chancen f{\"u}r die Zukunft : Tagung Berlin, 14. und 15. November 2006. - (VDI-Berichte ; 1951)},
  edition   = {Nichtred. Ms.-Dr.},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091951-5},
  pages     = {179 -- 190},
  year      = {2006},
  language  = {de}
}
@inproceedings{Kurz2006,
  author    = {Kurz, Melanie},
  title     = {Recognition of shape in virtual visualizations},
  series = {Proceedings : November 15 - 17, 2006, Technische Universit{\"a}t Darmstadt, Darmstadt, Germany ; PACE, Partners for the advancement of collaborative engineering education},
  booktitle = {Proceedings : November 15 - 17, 2006, Technische Universit{\"a}t Darmstadt, Darmstadt, Germany ; PACE, Partners for the advancement of collaborative engineering education},
  publisher = {Techn. Univ.},
  address   = {Darmstadt},
  isbn      = {978-3-00-020161-5},
  pages     = {203 -- 209},
  year      = {2006},
  language  = {en}
}
@book{ChwallekFelden2006,
  author    = {Chwallek, Constanze and Felden, Birgit},
  title     = {RatingCheck : Wertsch{\"o}pfungskette / Chwallek, Constanze ; Felden, Birgit},
  publisher = {Deutscher Sparkassen Verlag},
  address   = {Stuttgart},
  year      = {2006},
  language  = {en}
}
@article{Gebhardt2006,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Manufacturing - eine interdisziplin{\"a}re Strategie},
  year      = {2006},
  abstract  = {Als um 1987 ein Verfahren namens Stereolithographie und ein Stereolithography Apparatus (SLA) vorgestellt wurden, war der Traum von der Herstellung beliebiger dreidimensionaler Bauteile direkt aus Computerdaten und ohne bauteilspezifische Werkzeuge Realit{\"a}t geworden. Ein Anwendungs-Szenario wurde gleich mitgeliefert. Diese Technologie w{\"u}rde es m{\"o}glich machen, die gesamte Ersatzteilversorgung der Amerikanischen Pazifikflotte mittels ein paar dieser Maschinen, umfangreicher Datenst{\"a}tze und gen{\"u}gend Rohmaterial vor Ort auf einem Flugzeugtr{\"a}ger direkt nach Bedarf zu fertigen. Diese Vorstellung definierte schon damals die direkte digitale Fertigung, das Rapid Manufacturing. In der Realit{\"a}t bestanden die mit diesem Verfahren hergestellten Bauteile nur aus Kunststoff, waren ungenau, bruchempfindlich und klebrig und allein in der Produktentwicklung, eben als Prototypen zu benutzen. Sie waren schnell verf{\"u}gbar, weil zu Ihrer Herstellung keine Werkzeuge ben{\"o}tigt wurden. Folgerichtige und zudem modern hießen sie: Rapid Prototyping. Rapid Prototyping wurde schnell zum Synonym eines neuen Zweiges der Fertigungstechnik, der Generativen Fertigungstechnik. Die weitere Entwicklung brachte neue Verfahren, h{\"o}here Genauigkeiten, verbesserte Werkstoffe und neue Anwendungen. Die Herstellung von Negativen, also Werkzeugen, mit dem gleichen Verfahren wurde marketing-getrieben Rapid Tooling genannt und als die ersten Bauteile nicht mehr als Prototypen, sondern als Endprodukte eingesetzt wurden, nannte man dies Rapid Manufacturing - das Ziel war erreicht. War das Ziel wirklich erreicht? Ist es Rapid Manufacturing, wenn ein generativ gefertigtes Bauteil die gew{\"u}nschte Spezifikation erreicht? Was muss passieren, damit aus dem Ph{\"a}nomen Rapid Prototyping eine Strategie wird, die geeignet ist, einen Paradigmenwechsel von der heutigen Hersteller-induzierten Massenproduktion von Massenartikeln zur Verbraucher-induzierten (und verantworteten) Massenproduktion von Einzelteilen f{\"u}r jedermann erm{\"o}glichen und m{\"o}glicherweise unsere Arbeits- und Lebensformen tiefgreifend zu beeinflussen? Im Beitrag wird der Begriff der (Fertigungs-) Strategie „Rapid Manufacturing" n{\"a}her beleuchtet. Es wird diskutiert, welche Maßnahmen auf der technischen und der operative Ebene getroffen werden m{\"u}ssen, damit die generative Fertigungstechnik im Sinne dieser Strategie umgesetzt werden kann. Beispiele belegen, dass diese Entwicklung bereits begonnen hat und geben Anregungen f{\"u}r eine konstruktive Diskussion auf der RapidTech 2006.},
  subject      = {Rapid prototyping},
  language  = {de}
}
@article{HillgaertnerKappel2006,
  author    = {Hillg{\"a}rtner, Michael and Kappel, U.},
  title     = {Radiating Impedance of Mains Cabling During Emissions Testing},
  series = {EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility; September 4 - 8, 2006, Campus Nord, Technical University of Catalonia, Barcelona, Spain / [organized by Technical University of Catalonia (UPC) ... Ed. and publ. by: Ferran Silva ...]. - Vol. 1: Proceedings 1},
  journal   = {EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility; September 4 - 8, 2006, Campus Nord, Technical University of Catalonia, Barcelona, Spain / [organized by Technical University of Catalonia (UPC) ... Ed. and publ. by: Ferran Silva ...]. - Vol. 1: Proceedings 1},
  address   = {Barcelona},
  isbn      = {84-689-9439-1},
  pages     = {17 -- 22},
  year      = {2006},
  language  = {en}
}
@inproceedings{MirmohseniRostamizadeh2006,
  author    = {Mirmohseni, Abdolreza and Rostamizadeh, Kobra},
  title     = {Quartz crystal nanobalance in conjunction with principal component analysis for identification of volatile organic compounds},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1434},
  year      = {2006},
  abstract  = {Quartz crystal nanobalance (QCN) sensors are considered as powerful masssensitive sensors to determine materials in the sub-nanogram level. In this study, a single piezoelectric quartz crystal nanobalance modified with polystyrene was employed to detect benzene, toluene, ethylbenzene and xylene (BTEX compounds). The frequency shift of the QCN sensor was found to be linear against the BTEX compound concentrations in the range about 1-45 mg l-1. The correlation coefficients for benzene, toluene, ethylbenzene, and xylene were 0.991, 0.9977, 0.9946 and 0.9971, respectively. The principal component analysis was also utilized to process the frequency response data of the single piezoelectric crystal at different times, considering to the different adsorption-desorption dynamics of BTEX compounds. Using principal component analysis, it was found that over 90\% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful identification of benzene and toluene was possible through the principal component analysis of the transient responses of the polystyrene modified QCN sensor. The results showed that the polystyrene-modified QCN had favorable identification and quantification performances for the BTEX compounds.},
  subject      = {Biosensor},
  language  = {en}
}
@article{Heger2006,
  author    = {Heger, Michael},
  title     = {Qualit{\"a}tsentwicklung des wissenschaftlichen Service. Ansatz und Erfahrungen der Hochschuldidaktik und Studienberatung - Fachhochschule Aachen 2006},
  series = {Qualit{\"a}tsentwicklung an Hochschulen : Erfahrungen und Lehren aus 10 Jahren Evaluation ; Dokumentation zur gleichnamigen Veranstaltung des Projekts Qualit{\"a}tssicherung der HRK am 3. und 4. November 2005 im Bonner Wissenschaftszentrum / [HRK, Hochschulrektorenkonferenz. Herbsttagung "Qualit{\"a}tsentwicklung an Hochschulen, Erfahrungen und Lehren aus 10 Jahren Evaluation. Red.: J{\"o}rn Alphei ...]},
  journal   = {Qualit{\"a}tsentwicklung an Hochschulen : Erfahrungen und Lehren aus 10 Jahren Evaluation ; Dokumentation zur gleichnamigen Veranstaltung des Projekts Qualit{\"a}tssicherung der HRK am 3. und 4. November 2005 im Bonner Wissenschaftszentrum / [HRK, Hochschulrektorenkonferenz. Herbsttagung "Qualit{\"a}tsentwicklung an Hochschulen, Erfahrungen und Lehren aus 10 Jahren Evaluation. Red.: J{\"o}rn Alphei ...]},
  publisher = {HRK, Hochschulrektorenkonferenz},
  address   = {Bonn},
  pages     = {92 -- 97},
  year      = {2006},
  language  = {de}
}
@article{FerreinSchifferLakemeyer2006,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Lakemeyer, Gerhard},
  title     = {Qualitative World Models for Soccer Robots / Schiffer, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan W{\"o}lfl ... (eds.)},
  journal   = {Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan W{\"o}lfl ... (eds.)},
  publisher = {Univ.},
  address   = {Bremen},
  isbn      = {3-88722-666-6},
  pages     = {3 -- 14},
  year      = {2006},
  language  = {en}
}