@article{YoshinobuSchoening2021,
  author    = {Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {Light-addressable potentiometric sensors (LAPS) for cell monitoring and biosensing},
  series = {Current Opinion in Electrochemistry},
  journal   = {Current Opinion in Electrochemistry},
  number    = {In Press, Journal Pre-proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2451-9103},
  doi       = {10.1016/j.coelec.2021.100727},
  year      = {2021},
  language  = {en}
}
@article{WeldenJablonskiWegeetal.2021,
  author    = {Welden, Rene and Jablonski, Melanie and Wege, Christina and Keusgen, Michael and Wagner, Patrick Hermann and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Light-Addressable Actuator-Sensor Platform for Monitoring and Manipulation of pH Gradients in Microfluidics: A Case Study with the Enzyme Penicillinase},
  series = {Biosensors},
  volume    = {11},
  journal   = {Biosensors},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-6374},
  doi       = {10.3390/bios11060171},
  pages     = {Artikel 171},
  year      = {2021},
  abstract  = {The feasibility of light-addressed detection and manipulation of pH gradients inside an electrochemical microfluidic cell was studied. Local pH changes, induced by a light-addressable electrode (LAE), were detected using a light-addressable potentiometric sensor (LAPS) with different measurement modes representing an actuator-sensor system. Biosensor functionality was examined depending on locally induced pH gradients with the help of the model enzyme penicillinase, which had been immobilized in the microfluidic channel. The surface morphology of the LAE and enzyme-functionalized LAPS was studied by scanning electron microscopy. Furthermore, the penicillin sensitivity of the LAPS inside the microfluidic channel was determined with regard to the analyte's pH influence on the enzymatic reaction rate. In a final experiment, the LAE-controlled pH inhibition of the enzyme activity was monitored by the LAPS.},
  language  = {en}
}
@incollection{CroonCzarnecki2021,
  author    = {Croon, Philipp and Czarnecki, Christian},
  title     = {Liability for loss or damages caused by RPA},
  series = {Robotic process automation : Management, technology, applications},
  booktitle = {Robotic process automation : Management, technology, applications},
  editor    = {Czarnecki, Christian and Fettke, Peter},
  publisher = {De Gruyter},
  address   = {Oldenbourg},
  isbn      = {9783110676778},
  doi       = {10.1515/9783110676693-202},
  pages     = {135 -- 151},
  year      = {2021},
  abstract  = {Intelligent autonomous software robots replacing human activities and performing administrative processes are reality in today's corporate world. This includes, for example, decisions about invoice payments, identification of customers for a marketing campaign, and answering customer complaints. What happens if such a software robot causes a damage? Due to the complete absence of human activities, the question is not trivial. It could even happen that no one is liable for a damage towards a third party, which could create an uncalculatable legal risk for business partners. Furthermore, the implementation and operation of those software robots involves various stakeholders, which result in the unsolvable endeavor of identifying the originator of a damage. Overall it is advisable to all involved parties to carefully consider the legal situation. This chapter discusses the liability of software robots from an interdisciplinary perspective. Based on different technical scenarios the legal aspects of liability are discussed.},
  language  = {en}
}
@masterthesis{Ernst2021,
  type      = {Bachelor Thesis},
  author    = {Ernst, Loredana},
  title     = {Let´s change fashion!: Eine Image-Kampagne der Fair Wear Foundation f{\"u}r faire und nachhaltige Mode.},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {61 Seiten},
  year      = {2021},
  abstract  = {Fast Fashion-Ketten beherrschen die Modewelt. Doch einige Unternehmen, Siegel und Stiftungen versuchen die Textilindustrie neu umzugestalten. Um die Modeindustrie nachhaltig zu ver{\"a}ndern, m{\"u}ssen allerdings auch den Kunden die schlechten Arbeitsbedingungen und die negativen Einfl{\"u}sse der Textilbranche auf die Umwelt bewusst werden. Das konkrete Ziel der erstellten Kampagne ist es, modebewusste Menschen davon zu {\"u}berzeugen Fast Fashion hinter sich zu lassen. Es soll also ein Umdenken bei den Konsumenten stattfinden. Die Fair Wear Foundation und ihre Mitglieder vertreten die Vision, dass Mode auch fair und nachhaltig sein kann. Genau diese Vision soll mit der Kampagne vermittelt und an die Konsumenten weitergetragen werden.},
  language  = {de}
}
@masterthesis{Schrey2021,
  type      = {Bachelor Thesis},
  author    = {Schrey, Leander},
  title     = {Less Waste Shelf: Ein M{\"o}bel zur Reduzierung der h{\"a}uslich anfallenden Lebensmittelabf{\"a}lle},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {177 Seiten},
  year      = {2021},
  abstract  = {Mit dem Projekt wird sich dem Problem der weltweiten Lebensmittelverschwendung angenommen und versucht Abf{\"a}lle in Privathaushalten prim{\"a}r industrialisierter Staaten zu reduzieren. Mit j{\"a}hrlich 1,3 Milliarden Tonnen landet circa ein Drittel aller weltweit produzierten Lebensmittel im M{\"u}ll. Einen Großteil dieser Abf{\"a}lle ist vermeidbar, besonders dort, wo man im {\"U}berfluss lebt. Das konzipierte M{\"o}belst{\"u}ck soll die Lagerungsm{\"o}glichkeiten des Nutzers optimieren und somit f{\"u}r die Wertsch{\"a}tzung von Lebensmitteln sensibilisieren. F{\"u}r das M{\"o}belst{\"u}ck werden ausschließlich nat{\"u}rliche Materialien verwendet, welche in ihrer Charakteristik optimal zum Funktionsumfang passen, der f{\"u}r die Lagerung ben{\"o}tigt wird. Das Material Terracotta erm{\"o}glicht es, mittels Verdunstungsk{\"u}hlung stromlos Gem{\"u}se kalt zu halten. Antibakterielles Holz t{\"o}tet sch{\"a}dliche Bakterien ab. Die Konstruktion erm{\"o}glicht somit eine fachgerechte Lebensmittelagerung und erm{\"o}glicht sowohl sehr flexible Nutzung, wie auch leichte Reparatur.},
  language  = {de}
}
@techreport{GoellBraunsteinAlbracht2021,
  author    = {G{\"o}ll, Fabian and Braunstein, Bj{\"o}rn and Albracht, Kirsten},
  title     = {Lernende roboterassistierte Systeme f{\"u}r das neuromuskul{\"a}re Training - RoSylerNT; Teilvorhaben: Entwicklung eines neuromuskuloskelettalen Modells als Basis f{\"u}r die Interaktionsf{\"a}higkeiten autonomer Assistenzsysteme},
  publisher = {Deutsche Sporthochschule K{\"o}ln},
  address   = {K{\"o}ln},
  doi       = {10.2314/KXP:1855318741},
  pages     = {14 Seiten},
  year      = {2021},
  language  = {de}
}
@masterthesis{Krieger2021,
  type      = {Bachelor Thesis},
  author    = {Krieger, Selina},
  title     = {Lebensmitteletiketten und Inhaltsstoffe: Eine interaktive Anwendung {\"u}ber verarbeitete Lebensmittel},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {151 Seiten},
  year      = {2021},
  abstract  = {Verarbeitete Lebensmittel werden im Alltag vieler Verbraucher h{\"a}ufig konsumiert. Dabei hat der Konsum {\"u}ber einen l{\"a}ngeren Zeitraum hinweg einen negativen Einfluss auf die Gesundheit. Vor allem bei Produktverarbeitung, Zusatzstoffen und der Lebensmittelkennzeichnung ist h{\"a}ufig Aufkl{\"a}rung n{\"o}tig. Dieses Projekt setzt an dieser Stelle an, r{\"a}umt auf mit Missverst{\"a}ndnissen rund um das Thema und schafft Klarheit. In einer interaktiven App absolvieren die Anwendenden ein Quiz und werden mit ihrem eigenen Wissensstand konfrontiert. Auf jede Frage folgen eine kurze Information und eine Handlungsempfehlung, die Wissensl{\"u}cken f{\"u}llen. Mithilfe von Animationen werden die Informationen visuell untermauert. Im Katalog finden Nutzende zu jedem Zusatzstoff spezifische Informationen zur Herstellung, Verarbeitung und gesundheitlichen Aspekten. Such-, Filter- und Speicherfunktion erm{\"o}glichen eine individuelle Anwendung.},
  language  = {de}
}
@inproceedings{AdenackerGerhardsOttenetal.2021,
  author    = {Adenacker, J. and Gerhards, Benjamin and Otten, Christian and Schleser, Markus},
  title     = {Laserstrahlschweißen von Aluminium-Kupfer-Werkstoffkombinationen f{\"u}r die Elektromobilit{\"a}t},
  series = {DVS CONGRESS 2021},
  booktitle = {DVS CONGRESS 2021},
  publisher = {DVS Media GmbH},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-96144-146-4},
  pages     = {31 -- 38},
  year      = {2021},
  language  = {de}
}
@masterthesis{Sonntag2021,
  type      = {Bachelor Thesis},
  author    = {Sonntag, Jana},
  title     = {Konzeption und Entwicklung einer Corporate Identity und einer Tourismuskampagne f{\"u}r das Siegerland},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {57 Seiten},
  year      = {2021},
  abstract  = {Im Rahmen meiner Bachelorarbeit werden ich mich mit der Konzeption und Entwicklung einer Corporate Identity f{\"u}r das Siegerland besch{\"a}ftigen. Weiterhin m{\"o}chte ich eine Tourismuskampagne f{\"u}r diese Region gestalten.},
  language  = {de}
}
@masterthesis{Latz2021,
  type      = {Bachelor Thesis},
  author    = {Latz, Annika},
  title     = {Konzeptentwicklung einer spielerischen Lernanwendung f{\"u}r Studierende},
  school      = {Fachhochschule Aachen},
  pages     = {XIV, 136 Seiten},
  year      = {2021},
  abstract  = {Ziel der Arbeit war es eine spielerische Lernanwendung f{\"u}r Studierende der FH-Aachen zu entwickeln, um das individuelle Lernen zu f{\"o}rdern. Dabei lag der Fokus auf der Konzeptentwicklung eines Serious Games f{\"u}r die Fachhochschule Aachen. Abgeleitet von Motivationstheorien, Game Design Frameworks und Eigenschaften von digitalen spielerischen Konzepten wurde ein Vorgehensmodell zur Konzeptentwicklung eines Serious Games erstellt. Wichtige Punkte f{\"u}r die Anwendung waren eine intensive Austauschm{\"o}glichkeiten f{\"u}r Studierende und das Integrieren dieser in die Lehrveranstaltungen der FH-Aachen. In der abschließenden Evaluation wurde positives Feedback der Studierenden eingeholt und damit das Ziel der Arbeit erreicht. Zus{\"a}tzlich wurde f{\"u}r das erarbeitete Konzept die Wirtschaftlichkeit {\"u}berpr{\"u}ft. Daf{\"u}r wurde w{\"a}hrend der Bearbeitungszeit mit einem aufgestellten Team ein Business Plan f{\"u}r das F{\"o}rderprogramm Start-Up transfer.NRW entwickelt.},
  language  = {de}
}
@masterthesis{Kiutsukis2021,
  type      = {Bachelor Thesis},
  author    = {Kiutsukis, Maria},
  title     = {KOMU: Entwicklung eines modularen Regalsystems},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {213 Seiten},
  year      = {2021},
  abstract  = {KOMU entstand durch Analysieren der Ver{\"a}nderungen, die mit der Urbanisierung einhergehen - schnell schwindender Wohnraum, h{\"a}ufiges Umziehen und verschmolzene Raumnutzung. KOMU ist ein modulares Regalsystem, das erm{\"o}glicht, problemlos aus denselben Bestandteilen immer wieder verschiedene Wohn- und Raumsituationen zu schaffen. Das System ist komplett werkzeugfrei durch simples Ineinanderstecken aufzubauen. Weitere Add-Ons k{\"o}nnen {\"u}ber das gleiche Stecksystem in das Regal integriert werden, damit es perfekt an die Bed{\"u}rfnisse des Kunden anpasst werden kann. Durch klare Linien und eine cleane Designsprache f{\"u}gt sich KOMU nahtlos in seine Umgebung ein und hilft, eine f{\"u}r den Kunden ideale Umgebung zu schaffen. Ein Regal, das mitw{\"a}chst - vielf{\"a}ltig und individuell.},
  language  = {de}
}
@masterthesis{Dieter2021,
  type      = {Bachelor Thesis},
  author    = {Dieter, Helen},
  title     = {Koji - Entwicklung eines h{\"o}henverstellbaren Tisches zur Nutzung in Wohn- und Essr{\"a}umen},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {135 Seiten},
  year      = {2021},
  abstract  = {Um den immer komplexer werdenden Anspr{\"u}chen an Wohnraum gerecht zu werden, braucht es M{\"o}bel, die vielseitig und anpassbar sind. Koji ist ein Tisch, dessen Tischplatte unkompliziert in der H{\"o}he verstellt werden und so in diversen Wohnsituationen eingesetzt werden kann. Er kann als Esstisch genauso genutzt werden wie als Beistell- oder Couchtisch. Durch die Mechanik, die die H{\"o}henverstellbarkeit erm{\"o}glicht, bekommt der Tisch einen verspielten, beinahe lebendigen Charakter, der zur Interaktion einl{\"a}dt. Er ist mehr als ein stummer Begleiter des Alltags, sondern vielmehr Inspiration, seine Umgebung aktiv zu gestalten, um sie so f{\"u}r sich optimal einzurichten.},
  language  = {de}
}
@article{BlankeRegerDoeringetal.2021,
  author    = {Blanke, Tobias and Reger, Vitali and D{\"o}ring, Bernd and G{\"o}ttsche, Joachim and Kuhnhenne, Markus},
  title     = {Koaxiale Stahlenergiepf{\"a}hle},
  series = {Stahlbau},
  volume    = {90. 2021},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  pages     = {417 -- 424},
  year      = {2021},
  abstract  = {Ein entscheidender Teil der Energiewende ist die W{\"a}rmewende im Geb{\"a}udesektor. Ein Schl{\"u}sselelement sind hier W{\"a}rmepumpen. Diese ben{\"o}tigen eine W{\"a}rmequelle, der sie Energie entziehen k{\"o}nnen, um sie auf ein h{\"o}heres Temperaturniveau zu transformieren. Diese W{\"a}rmequelle kann bspw. das Erdreich sein, dessen W{\"a}rme durch Erdsonden erschlossen werden kann. In diesem Beitrag werden in Stahlpf{\"a}hle integrierte Koaxialsonden mit dem Stand der Technik von Erdsonden gleichen Durchmessers bez{\"u}glich ihrer thermischen Leistungsmerkmale verglichen. Die Stahlenergiepf{\"a}hle bieten neben der W{\"a}rmegewinnung weitere Vorteile, da sie auch eine statische Funktion {\"u}bernehmen und r{\"u}ckstandsfrei zur{\"u}ckgebaut werden k{\"o}nnen. Es werden analytische und numerische Berechnungen vorgestellt, um die thermischen Potenziale beider Systeme zu vergleichen. Außerdem wird ein Testaufbau gezeigt, bei dem Stahlenergiepf{\"a}hle in zwei verschiedenen L{\"a}ngen mit vorhandenen g{\"a}ngigen Erdsonden verglichen werden k{\"o}nnen. Die Berechnungen zeigen einen deutlichen thermischen Mehrertrag zwischen 26 \% und 148 \% der Stahlenergiepf{\"a}hle gegen{\"u}ber dem Stand der Technik abh{\"a}ngig vom Erdreich. Die Messergebnisse zeigen einen thermischen Mehrertrag von {\"u}ber 100 \%. Es l{\"a}sst sich also signifikante Erdsondenl{\"a}nge einsparen. Dabei ist zu beachten, dass sich damit der thermisch genutzte Bereich des Erdreichs reduziert, wodurch die thermische Regeneration und/oder das Langzeitverhalten des Erdreichs an Bedeutung gewinnt.},
  language  = {de}
}
@masterthesis{Gier2021,
  type      = {Bachelor Thesis},
  author    = {Gier, Miriam},
  title     = {Kleiner Kontinent: Ein neues Branding f{\"u}r die Tourismusmarke Sardinien},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {51 Seiten},
  year      = {2021},
  abstract  = {Aufgrund von weltweit verh{\"a}ngten Reisebeschr{\"a}nkungen und der Angst vor Ansteckung mit Covid-19 entschieden sich viele Touristen, ihren Urlaub 2020 ausfallen zu lassen. Die weltweite Corona-Pandemie hat insbesondere die italienische Tourismusbranche schwer getroffen und die {\"U}bernachtungszahlen innerhalb k{\"u}rzester Zeit zu einem erheblichen Einbruch gebracht - so auch auf der beliebten Mittelmeerinsel Sardinien. Um weiteren schwerwiegenden wirtschaftlichen Sch{\"a}den fr{\"u}hestm{\"o}glich entgegenzuwirken, soll ein klar kommunizierendes Gestaltungskonzept, das in all seinen Facetten von Sardinien und dessen zahlreichen Vorz{\"u}gen inspiriert ist, einen erfolgreichen Neustart nach der Corona-Krise f{\"u}r die Insel einleiten. Das neue Erscheinungsbild der Tourismusmarke basiert unter anderem grundlegend auf typografischen Gestaltungselementen wie der eigens entwickelten Corporate Font „Sardegna Hybrid".},
  language  = {de}
}
@misc{Bartsch2021,
  type      = {Master Thesis},
  author    = {Bartsch, Janosch},
  title     = {Kleidung {\"u}ber Kleidung: eine Bekleidungsserie, die {\"u}ber die Bekleidungsindustrie informiert},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {182 Seiten},
  year      = {2021},
  abstract  = {Kleidung ist ein Kommunikationsmedium. Im Projekt wird Bekleidung als Informationstr{\"a}ger genutzt, um {\"u}ber die verschiedenen Abschnitte im Zyklus eines Kleidungsst{\"u}cks sowie die Missst{\"a}nde in der Bekleidungsindustrie zu informieren. Entstanden sind 6 Kleidungsst{\"u}cke, jeweils eins pro Abschnitt im Zyklus, vom Baumwollanbau {\"u}ber Spinnereien, Produktionsfabriken, dem Einzelhandel und Gebrauch bis zur Entsorgung. Die einfach gehaltenen Kleidungsst{\"u}cke besitzen Aufdrucke. {\"U}ber eine Augmented-Reality-App k{\"o}nnen die Kleidungsst{\"u}cke gescannt werden. In Kombination mit der digitalen Ebene werden die Aufdrucke zu Informationsgrafiken. So wird unter anderem {\"u}ber die grausamen Arbeitsumst{\"a}nde in der Produktion informiert oder dar{\"u}ber, dass wir unsere Kleidungsst{\"u}cke durchschnittlich nur 4x anziehen. Immer geht es darum, den Betrachter dazu anzuregen, seine Konsumentscheidungen zu {\"u}berdenken.},
  language  = {de}
}
@article{BurgerRumpfDoetal.2021,
  author    = {Burger, Ren{\´e} and Rumpf, Jessica and Do, Xuan Tung and Monakhova, Yulia and Diehl, Bernd W. K. and Rehahn, Matthias and Schulze, Margit},
  title     = {Is NMR combined with multivariate regression applicable for the molecular weight determination of randomly cross-linked polymers such as lignin?},
  series = {ACS Omega},
  volume    = {6},
  journal   = {ACS Omega},
  number    = {44},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {2470-1343},
  doi       = {10.1021/acsomega.1c03574},
  pages     = {29516 -- 29524},
  year      = {2021},
  abstract  = {The molecular weight properties of lignins are one of the key elements that need to be analyzed for a successful industrial application of these promising biopolymers. In this study, the use of 1H NMR as well as diffusion-ordered spectroscopy (DOSY NMR), combined with multivariate regression methods, was investigated for the determination of the molecular weight (Mw and Mn) and the polydispersity of organosolv lignins (n = 53, Miscanthus x giganteus, Paulownia tomentosa, and Silphium perfoliatum). The suitability of the models was demonstrated by cross validation (CV) as well as by an independent validation set of samples from different biomass origins (beech wood and wheat straw). CV errors of ca. 7-9 and 14-16\% were achieved for all parameters with the models from the 1H NMR spectra and the DOSY NMR data, respectively. The prediction errors for the validation samples were in a similar range for the partial least squares model from the 1H NMR data and for a multiple linear regression using the DOSY NMR data. The results indicate the usefulness of NMR measurements combined with multivariate regression methods as a potential alternative to more time-consuming methods such as gel permeation chromatography.},
  language  = {en}
}
@article{BurmistrovaSobolevaMonakhova2021,
  author    = {Burmistrova, Natalia A. and Soboleva, Polina M. and Monakhova, Yulia},
  title     = {Is infrared spectroscopy combined with multivariate analysis a promising tool for heparin authentication?},
  series = {Journal of Pharmaceutical and Biomedical Analysis},
  volume    = {194},
  journal   = {Journal of Pharmaceutical and Biomedical Analysis},
  number    = {Article number: 113811},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0731-7085},
  doi       = {10.1016/j.jpba.2020.113811},
  year      = {2021},
  abstract  = {The investigation of the possibility to determine various characteristics of powder heparin (n = 115) was carried out with infrared spectroscopy. The evaluation of heparin samples included several parameters such as purity grade, distributing company, animal source as well as heparin species (i.e. Na-heparin, Ca-heparin, and heparinoids). Multivariate analysis using principal component analysis (PCA), soft independent modelling of class analogy (SIMCA), and partial least squares - discriminant analysis (PLS-DA) were applied for the modelling of spectral data. Different pre-processing methods were applied to IR spectral data; multiplicative scatter correction (MSC) was chosen as the most relevant. Obtained results were confirmed by nuclear magnetic resonance (NMR) spectroscopy. Good predictive ability of this approach demonstrates the potential of IR spectroscopy and chemometrics for screening of heparin quality. This approach, however, is designed as a screening tool and is not considered as a replacement for either of the methods required by USP and FDA.},
  language  = {en}
}
@incollection{DiekmannEggert2021,
  author    = {Diekmann, Julian and Eggert, Mathias},
  title     = {Is a Progressive Web App an Alternative for Native App Development?},
  series = {3. Wissenschaftsforum: Digitale Transformation (WiFo21) (Lecture Notes in Informatics ; P-319)},
  booktitle = {3. Wissenschaftsforum: Digitale Transformation (WiFo21) (Lecture Notes in Informatics ; P-319)},
  publisher = {Gesellschaft f{\"u}r Informatik},
  address   = {Darmstadt},
  isbn      = {978-3-88579-713-5},
  pages     = {35 -- 48},
  year      = {2021},
  abstract  = {The existence of several mobile operating systems, such as Android and iOS, is a challenge for developers because the individual platforms are not compatible with each other and require separate app developments. For this reason, cross-platform approaches have become popular but lack in cloning the native behavior of the different operating systems. Out of the plenty cross-platform approaches, the progressive web app (PWA) approach is perceived as promising but needs further investigation. Therefore, the paper at hand aims at investigating whether PWAs are a suitable alternative for native apps by developing a PWA clone of an existing app. Two surveys are conducted in which potential users test and evaluate the PWA prototype with regard to its usability. The survey results indicate that PWAs have great potential, but cannot be treated as a general alternative to native apps. For guiding developers when and how to use PWAs, four design guidelines for the development of PWA-based apps are derived based on the results.},
  language  = {en}
}
@article{CapitainWagnerHummeletal.2021,
  author    = {Capitain, Charlotte and Wagner, Sebastian and Hummel, Joana and Tippk{\"o}tter, Nils},
  title     = {Investigation of C-N Formation Between Catechols and Chitosan for the Formation of a Strong, Novel Adhesive Mimicking Mussel Adhesion},
  series = {Waste and Biomass Valorization},
  volume    = {12},
  journal   = {Waste and Biomass Valorization},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {1877-265X},
  doi       = {10.1007/s12649-020-01110-5},
  pages     = {1761 -- 1779},
  year      = {2021},
  language  = {en}
}
@article{HacklNacovKammerlohretal.2021,
  author    = {Hackl, Michael and Nacov, Julia and Kammerlohr, Sandra and Staat, Manfred and Buess, Eduard and Leschinger, Tim and M{\"u}ller, Lars P. and Wegmann, Kilian},
  title     = {Intratendinous Strain Variations of the Supraspinatus Tendon Depending on Repair Technique: A Biomechanical Analysis Regarding the Cause of Medial Cuff Failure},
  series = {The American Journal of Sports Medicine},
  volume    = {49},
  journal   = {The American Journal of Sports Medicine},
  number    = {7},
  publisher = {Sage},
  address   = {London},
  issn      = {1552-3365},
  doi       = {10.1177/03635465211006138},
  pages     = {1847 -- 1853},
  year      = {2021},
  language  = {en}
}
@inproceedings{SchulzeBuxlohGross2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz},
  title     = {Interdisciplinary Course Smart Building Engineering: A new approach of teaching freshmen in remote teamwork project under pandemic restrictions},
  series = {New Perspectives in Science Education - International Conference},
  booktitle = {New Perspectives in Science Education - International Conference},
  publisher = {Filodiritto},
  address   = {Bologna},
  pages     = {4 Seiten},
  year      = {2021},
  abstract  = {In the context of the Corona pandemic and its impact on teaching like digital lectures and exercises a new concept especially for freshmen in demanding courses of Smart Building Engineering became necessary. As there were hardly any face-to-face events at the university, the new teaching concept should enable a good start into engineering studies under pandemic conditions anyway and should also replace the written exam at the end. The students should become active themselves in small teams instead of listening passively to a lecture broadcast online with almost no personal contact. For this purpose, a role play was developed in which the freshmen had to work out a complete solution to the realistic problem of designing, construction planning and implementing a small guesthouse. Each student of the team had to take a certain role like architect, site manager, BIM-manager, electrician and the technitian for HVAC installations. Technical specifications must be complied with, as well as documentation, time planning and cost estimate. The final project folder had to contain technical documents like circuit diagrams for electrical components, circuit diagrams for water and heating, design calculations and components lists. On the other hand construction schedule, construction implementation plan, documentation of the construction progress and minutes of meetings between the various trades had to be submitted as well. In addition to the project folder, a model of the construction project must also be created either as a handmade model or as a digital 3D-model using Computer-aided design (CAD) software. The first steps in the field of Building information modelling (BIM) had also been taken by creating a digital model of the building showing the current planning status in real time as a digital twin. This project turned out to be an excellent training of important student competencies like teamwork, communication skills, and self -organisation and also increased motivation to work on complex technical questions. The aim of giving the student a first impression on the challenges and solutions in building projects with many different technical trades and their points of view was very well achieved and should be continued in the future.},
  language  = {en}
}
@inproceedings{Butenweg2021,
  author    = {Butenweg, Christoph},
  title     = {Integrated approach for monitoring and management of buildings with digital building models and modern sensor technologies},
  series = {Proceedings of the International Conference Civil Engineering 2021 - Achievements and Visions},
  booktitle = {Proceedings of the International Conference Civil Engineering 2021 - Achievements and Visions},
  editor    = {Kuzmanović, Vladan and Ignjatović, Ivan},
  publisher = {University of Belgrade},
  address   = {Belgrade},
  pages     = {67 -- 75},
  year      = {2021},
  abstract  = {Nowadays modern high-performance buildings and facilities are equipped with monitoring systems and sensors to control building characteristics like energy consumption, temperature pattern and structural safety. The visualization and interpretation of sensor data is typically based on simple spreadsheets and non-standardized user-oriented solutions, which makes it difficult for building owners, facility managers and decision-makers to evaluate and understand the data. The solution of this problem in the future are integrated BIM-Sensor approaches which allow the generation of BIM models incorporating all relevant information of monitoring systems. These approaches support both the dynamic visualization of key structural performance parameters, the effective long-term management of sensor data based on BIM and provide a user-friendly interface to communicate with various stakeholders. A major benefit for the end user is the use of the BIM software architecture, which is the future standard anyway. In the following, the application of the integrated BIM-Sensor approach is illustrated for a typical industrial facility as a part of an early warning and rapid response system for earthquake events currently developed in the research project "ROBUST" with financial support by the German Federal Ministry for Economic Affairs and Energy (BMWI).},
  language  = {en}
}
@masterthesis{Schmitz2021,
  type      = {Bachelor Thesis},
  author    = {Schmitz, Jennifer},
  title     = {Inklusives Design: Multisensorisches Branding f{\"u}r sehbehinderte, blinde und sehende Menschen},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {77 Seiten},
  year      = {2021},
  abstract  = {Multisensorisches Branding bezeichnet die Gestaltung f{\"u}r mindestens zwei Sinne. Diese Bachelorarbeit beinhaltet daher ein Konzept, um sehbehinderten Menschen und Blinden das Branding einer Marke im Bereich der Bekleidungsindustrie zug{\"a}nglich zu machen. Durch die gezielte Kombination von Haptik und Optik ist im Rahmen dieser Arbeit eine Bekleidungsmarke entstanden, deren Textilien jegliche Informationen f{\"u}r sehbehinderte und blinde Menschen enthalten, ohne dabei auf eine ansprechende Optik f{\"u}r Sehende zu verzichten. Vor allem durch neu entwickelte Open Source Symbole, die f{\"u}hlbar sind, und einen Barcode wird Betroffenen in Zukunft der Kauf von Bekleidung sowie der Waschvorgang erleichtert.},
  language  = {de}
}
@inproceedings{ŠakićMilijašMarinkovićetal.2021,
  author    = {Šakić, Bogdan and Milijaš, Aleksa and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven},
  title     = {Influence of prior in-plane damage on the out-of-plane response of non-load bearing unreinforced masonry walls under seismic load},
  series = {Proceedings of COMPDYN 2021},
  booktitle = {Proceedings of COMPDYN 2021},
  editor    = {Papadrakakis, Manolis and Fragiadakis, Michalis},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  isbn      = {9786188507258},
  issn      = {2623-3347},
  doi       = {10.7712/120121.8527.18913},
  pages     = {808 -- 828},
  year      = {2021},
  abstract  = {Reinforced concrete frames with masonry infill walls are popular form of construction all over the world as well in seismic regions. While severe earthquakes can cause high level of damage of both reinforced concrete and masonry infills, earthquakes of lower to medium intensity some-times can cause significant level of damage of masonry infill walls. Especially important is the level of damage of face loaded infill masonry walls (out-of-plane direction) as out-of-plane load cannot only bring high level of damage to the wall, it can also be life-threating for the people near the wall. The response in out-of-plane direction directly depends on the prior in-plane damage, as previous investigation shown that it decreases resistance capacity of the in-fills. Behaviour of infill masonry walls with and without prior in-plane load is investigated in the experimental campaign and the results are presented in this paper. These results are later compared with analytical approaches for the out-of-plane resistance from the literature. Conclusions based on the experimental campaign on the influence of prior in-plane damage on the out-of-plane response of infill walls are compared with the conclusions from other authors who investigated the same problematic.},
  language  = {en}
}
@article{BrockhausBehbahaniMurisetal.2021,
  author    = {Brockhaus, Moritz K. and Behbahani, Mehdi and Muris, Farina and Jansen, Sebastian V. and Schmitz- Rode, Thomas and Steinseifer, Ulrich and Clauser, Johanna C.},
  title     = {In vitro thrombogenicity testing of pulsatile mechanical circulatory support systems: Design and proof-of-concept},
  series = {Artificial Organs},
  volume    = {45},
  journal   = {Artificial Organs},
  number    = {12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1525-1594},
  doi       = {10.1111/aor.14046},
  pages     = {1513 -- 1521},
  year      = {2021},
  abstract  = {Thrombogenic complications are a main issue in mechanical circulatory support (MCS). There is no validated in vitro method available to quantitatively assess the thrombogenic performance of pulsatile MCS devices under realistic hemodynamic conditions. The aim of this study is to propose a method to evaluate the thrombogenic potential of new designs without the use of complex in-vivo trials. This study presents a novel in vitro method for reproducible thrombogenicity testing of pulsatile MCS systems using low molecular weight heparinized porcine blood. Blood parameters are continuously measured with full blood thromboelastometry (ROTEM; EXTEM, FIBTEM and a custom-made analysis HEPNATEM). Thrombus formation is optically observed after four hours of testing. The results of three experiments are presented each with two parallel loops. The area of thrombus formation inside the MCS device was reproducible. The implantation of a filter inside the loop catches embolizing thrombi without a measurable increase of platelet activation, allowing conclusions of the place of origin of thrombi inside the device. EXTEM and FIBTEM parameters such as clotting velocity (α) and maximum clot firmness (MCF) show a total decrease by around 6\% with a characteristic kink after 180 minutes. HEPNATEM α and MCF rise within the first 180 minutes indicate a continuously increasing activation level of coagulation. After 180 minutes, the consumption of clotting factors prevails, resulting in a decrease of α and MCF. With the designed mock loop and the presented protocol we are able to identify thrombogenic hot spots inside a pulsatile pump and characterize their thrombogenic potential.},
  language  = {en}
}
@article{LowisFergusonPaulssenetal.2021,
  author    = {Lowis, Carsten and Ferguson, Simon and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Improved Sc-44 production in a siphon-style liquid target on a medical cyclotron},
  series = {Applied Radiation and Isotopes},
  volume    = {172},
  journal   = {Applied Radiation and Isotopes},
  number    = {Art. 109675},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0969-8043},
  doi       = {10.1016/j.apradiso.2021.109675},
  year      = {2021},
  language  = {en}
}
@masterthesis{Najarov2021,
  type      = {Bachelor Thesis},
  author    = {Najarov, Azer},
  title     = {Ich sehe was, was Du nicht siehst: Herkunft \& Identit{\"a}t j{\"u}discher Menschen in Deutschland nach der Nachkriegszeit},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {105 Seiten},
  year      = {2021},
  abstract  = {Wir alle haben schon einmal von ihnen geh{\"o}rt. Die einen kennen sie aus dem Geschichtsunterricht, die anderen haben sie vielleicht auch schon mal bewusst oder unbewusst auf der Straße gesehen. Einige sind es sogar selbst. Die Rede ist von j{\"u}dischen Menschen in Deutschland. In unserer Bundesrepublik wird die j{\"u}dische Bev{\"o}lkerung unausweichlich mit dem Gedanken des Holocausts verbunden. J{\"u}dinnen und Juden wird somit eine Identit{\"a}t zugesprochen, mit der sie nichts zu tun haben. Es findet eine Stigmatisierung statt. Dabei sind j{\"u}dische Menschen heutzutage so divers wie noch nie. Das Printmedium »Ich sehe was, was Du nicht siehst« beleuchtet diese selten wahrgenommene Diversit{\"a}t und zeigt durch spannende Interviews eine j{\"u}dische Welt, die außerhalb der NS-Verbrechen liegt. Dar{\"u}ber hinaus findet man Informationen zu verschiedenen j{\"u}dischen Br{\"a}uchen, historischen Ereignissen und interessanten Infografiken. },
  language  = {de}
}
@masterthesis{Devjatko2021,
  type      = {Bachelor Thesis},
  author    = {Devjatko, Elli},
  title     = {Hyphan - ein modulares Sitzsystem mit intelligenten Materialien},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {173 Seiten},
  year      = {2021},
  abstract  = {Hyphan ist ein modulares System, welches sich aus diversen Grundelementen aufbaut. Die M{\"o}glichkeiten des Aufbaus sind vielseitig und Umfangreich. Achsiale- sowie lineare Erweiterung sorgen f{\"u}r ein Modul Umfang, der zahlreiche Fl{\"a}che erschaffen kann. So kann L{\"a}nge und Tiefe eines Objekts umfangreich sowie vielf{\"a}ltig gestaltet werden. Hyphan wendet sich an die Bed{\"u}rfnisse der Neuen Generationen, versucht flexibel in seiner Form zu sein und zuverl{\"a}ssig, langlebig und qualitativ in seinem Material. Durch die Diskussion {\"u}ber die neuen Formen der Mobilit{\"a}t und dem Nachhaltigkeitsaspekt sehe ich in der Gestaltung von urbanen Knotenpunkten und ihren Interior sehr großes Potenzial f{\"u}r Hyphan.},
  language  = {de}
}
@article{DickhoffHorikawaFunke2021,
  author    = {Dickhoff, Jens and Horikawa, Atsushi and Funke, Harald},
  title     = {Hydrogen Combustion - new DLE Combustor Addresses NOx Emissions and Flashback},
  series = {Turbomachinery international : the global journal of energy equipment},
  volume    = {62},
  journal   = {Turbomachinery international : the global journal of energy equipment},
  number    = {4},
  publisher = {MJH Life Sciences},
  address   = {Cranbury},
  issn      = {2767-2328},
  pages     = {26 -- 27},
  year      = {2021},
  language  = {en}
}
@article{ErpicumCrookstonBombardellietal.2021,
  author    = {Erpicum, Sebastien and Crookston, Brian M. and Bombardelli, Fabian and Bung, Daniel Bernhard and Felder, Stefan and Mulligan, Sean and Oertel, Mario and Palermo, Michele},
  title     = {Hydraulic structures engineering: An evolving science in a changing world},
  series = {Wires Water},
  volume    = {8},
  journal   = {Wires Water},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2049-1948},
  doi       = {10.1002/wat2.1505},
  year      = {2021},
  language  = {en}
}
@masterthesis{Keller2021,
  type      = {Bachelor Thesis},
  author    = {Keller, Valeria},
  title     = {HUMAN(E): Ein Projekt zur Humanisierung der Arbeitswelt},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {49 Seiten},
  year      = {2021},
  abstract  = {"HUMAN(E) at work" ist ein Projekt, welches auf Basis eigener Erfahrung entstanden ist. Ein Magazin in Zeitungsoptik sollte an den humanit{\"a}ren Gedanken bez{\"u}glich der Arbeitswelt des 21. Jahrhunderts ankn{\"u}pfen. Das Ziel: Einen Dialog schaffen f{\"u}r Selbstreflexion, Erfahrungsaustausch und die Entdeckung neuer Arbeitsmethoden am Arbeitsplatz. Weg vom typisch tayloristisch-gepr{\"a}gtem Arbeiter, hin zur besseren Work-Life-Balance. Begleitet durch die "nahe" Optik der Zeitung und Illustrationen mit dem Menschen im Vordergrund, versucht das Magazin nicht nur zu informieren, sondern auch M{\"o}glichkeiten aufzutun. So sind nicht nur aufregende Arbeitsstellen zu finden, sondern unterst{\"u}tzt auch die M{\"o}glichkeit sich in schwierigen Arbeitslagen Geh{\"o}r zu verschaffen. Ein einfaches Druckprinzip mit Zeitungspapier und begrenzten Farben erm{\"o}glicht außerdem einen g{\"u}nstigen Preis und dadurch hohe Erreichbarkeit in verschiedensten Personenkreisen.},
  language  = {de}
}
@inproceedings{MertensPuetzBrauneretal.2021,
  author    = {Mertens, Alexander and P{\"u}tz, Sebastian and Brauner, Philipp and Brillowski, Florian Sascha and Buczak, Nadine and Dammers, Hannah and van Dyck, Marc and Kong, Iris and K{\"o}nigs, Peter and Kortomeikel, Frauke Carole and Rodemann, Niklas and Schaar, Anne Kathrin and Steuer-Dankert, Linda and Wlecke, Shari and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Piller, Frank Thomas and Schuh, G{\"u}nther and Ziefle, Martina and Nitsch, Verena},
  title     = {Human digital shadow: Data-based modeling of users and usage in the internet of production},
  series = {14th Conference Human System Interaction Conference Proceedings},
  booktitle = {14th Conference Human System Interaction Conference Proceedings},
  publisher = {IEEE},
  doi       = {10.1109/HSI52170.2021.9538729},
  pages     = {1 -- 8},
  year      = {2021},
  abstract  = {Digital Shadows as the aggregation, linkage and abstraction of data relating to physical objects are a central vision for the future of production. However, the majority of current research takes a technocentric approach, in which the human actors in production play a minor role. Here, the authors present an alternative anthropocentric perspective that highlights the potential and main challenges of extending the concept of Digital Shadows to humans. Following future research methodology, three prospections that illustrate use cases for Human Digital Shadows across organizational and hierarchical levels are developed: human-robot collaboration for manual work, decision support and work organization, as well as human resource management. Potentials and challenges are identified using separate SWOT analyses for the three prospections and common themes are emphasized in a concluding discussion.},
  language  = {en}
}
@article{GrundlachBaumannEngelmann2021,
  author    = {Grundlach, Michael and Baumann, Martin and Engelmann, Ulrich M.},
  title     = {How Multimodal Examinations Can Increase Sustainable Student Gain by Aligning Teaching and Assessment},
  series = {Current Directions in Biomedical Engineering},
  volume    = {7},
  journal   = {Current Directions in Biomedical Engineering},
  number    = {7/2},
  editor    = {D{\"o}ssel, Olaf},
  publisher = {De Gruyter},
  address   = {Berlin},
  isbn      = {2364-5504},
  doi       = {10.1515/cdbme-2021-2019},
  pages     = {73 -- 76},
  year      = {2021},
  abstract  = {Modern industry and multi-discipline projects require highly trained individuals with resilient science and engineering back-grounds. Graduates must be able to agilely apply excellent theoretical knowledge in their subject matter as well as essential practical "hands-on" knowledge of diverse working processes to solve complex problems. To meet these demands, university education follows the concept of Constructive Alignment and thus increasingly adopts the teaching of necessary practical skills to the actual industry requirements and assessment routines. However, a systematic approach to coherently align these three central teaching demands is strangely absent from current university curricula. We demonstrate the feasibility of implementing practical assessments in a regular theory-based examination, thus defining the term "blended assessment". We assessed a course for natural science and engineering students pursuing a career in biomedical engineering, and evaluated the benefit of blended assessment exams for students and lecturers. Our controlled study assessed the physiological background of electrocardiograms (ECGs), the practical measurement of ECG curves, and their interpretation of basic pathologic alterations. To study on long time effects, students have been assessed on the topic twice with a time lag of 6 months. Our findings suggest a significant improvement in student gain with respect to practical skills and theoretical knowledge. The results of the reassessments support these outcomes. From the lecturers' point of view, blended assessment complements practical training courses while keeping organizational effort manageable. We consider blended assessment a viable tool for providing an improved student gain, industry-ready education format that should be evaluated and established further to prepare university graduates optimally for their future careers.},
  language  = {en}
}
@article{BohndickBosseJaenschetal.2021,
  author    = {Bohndick, Carla and Bosse, Elke and J{\"a}nsch, Vanessa K. and Barnat, Miriam},
  title     = {How different diversity factors affect the perception of first-year requirements in higher education},
  series = {Frontline Learning Research},
  volume    = {9},
  journal   = {Frontline Learning Research},
  number    = {2},
  publisher = {EARLI},
  issn      = {2295-3159},
  doi       = {10.14786/flr.v9i2.667},
  pages     = {78 -- 95},
  year      = {2021},
  abstract  = {In the light of growing university entry rates, higher education institutions not only serve larger numbers of students, but also seek to meet first-year students' ever more diverse needs. Yet to inform universities how to support the transition to higher education, research only offers limited insights. Current studies tend to either focus on the individual factors that affect student success or they highlight students' social background and their educational biography in order to examine the achievement of selected, non-traditional groups of students. Both lines of research appear to lack integration and often fail to take organisational diversity into account, such as different types of higher education institutions or degree programmes. For a more comprehensive understanding of student diversity, the present study includes individual, social and organisational factors. To gain insights into their role for the transition to higher education, we examine how the different factors affect the students' perception of the formal and informal requirements of the first year as more or less difficult to cope with. As the perceived requirements result from both the characteristics of the students and the institutional context, they allow to investigate transition at the interface of the micro and the meso level of higher education. Latent profile analyses revealed that there are no profiles with complex patterns of perception of the first-year requirements, but the identified groups rather differ in the overall level of perceived challenges. Moreover, SEM indicates that the differences in the perception largely depend on the individual factors self-efficacy and volition.},
  language  = {en}
}
@incollection{Peterson2021,
  author    = {Peterson, Leif Arne},
  title     = {Holzbau},
  series = {Wof{\"u}r braucht man das eigentlich? Ein Handbuch f{\"u}r Mathematiklehrkr{\"a}fte der Sekundarstufe I und II},
  booktitle = {Wof{\"u}r braucht man das eigentlich? Ein Handbuch f{\"u}r Mathematiklehrkr{\"a}fte der Sekundarstufe I und II},
  editor    = {Schl{\"u}ter, Dominik},
  publisher = {BoD},
  address   = {Norderstedt},
  isbn      = {978-3-7543-2606-0},
  pages     = {21 -- 23},
  year      = {2021},
  language  = {de}
}
@article{OertelBung2021,
  author    = {Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Hochwasserschutz - eine Aufgabe f{\"u}r eine nachhaltige Wasserwirtschaft},
  series = {Wasserwirtschaft},
  volume    = {111},
  journal   = {Wasserwirtschaft},
  number    = {9-10},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {3 -- 19},
  year      = {2021},
  language  = {de}
}
@masterthesis{Funger2021,
  type      = {Bachelor Thesis},
  author    = {Funger, Marvin},
  title     = {Historie kinetischer Typografie: zeitliche Abbildung der Entstehung und Ver{\"a}nderung kinetischer Typografie},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {235 Seiten},
  year      = {2021},
  abstract  = {Die heutige, vielf{\"a}ltige kinetische Typografie hat eine lange Entwicklung durchgemacht. Die Darstellung dieser in einer zeitlichen Reihenfolge vermittelt ein Verst{\"a}ndnis {\"u}ber Ursprung und Evolution. Die Publikation stellt die historische, analoge sowie die moderne, digitale Entwicklung dar. Dabei wird die Verbindung und der Einfluss der damaligen Gestaltung in der heutigen Umsetzung beleuchtet. Die Plakatreihe erkl{\"a}rt drei Anwendungsm{\"o}glichkeiten der kinetischen Typografie. Hierbei werden teils reale Objekte nachgestellt, um die Wiedererkennung dieser im Alltag zu f{\"o}rdern. Gemeinsam zeigen die Plakate und die Publikation ein breites Spektrum der kinetischen Typografie und f{\"o}rdern das Verst{\"a}ndnis dieser digitalen Umsetzung von Schrift in bewegter Form.},
  language  = {de}
}
@masterthesis{Friede2021,
  type      = {Bachelor Thesis},
  author    = {Friede, Celine},
  title     = {Herbothecary: Eine App f{\"u}r den eigenen Apothekergarten},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {108 Seiten},
  year      = {2021},
  abstract  = {„Gegen jedes Leiden ist ein Kraut gewachsen" lautet eine alte Volksweisheit. Doch auch heute, in einer Zeit, in der wir Verantwortung in unserer eigenen Gesundheit {\"u}bernehmen m{\"o}chten, w{\"a}chst das Interesse an Pflanzenheilkunde stetig. Das Projekt „Herbothecary" schafft einen einfachen Zugang zur Welt der Heilpflanzen. Dies geschieht mithilfe einer App, die als Auswahlhilfe f{\"u}r Samen dient und alle n{\"o}tigen Informationen zur Heilwirkung und Identifikation der Pflanze bietet. Auch prozessbegleitende Anleitungen finden die Nutzenden hier. Um das Packaging-Design der Samen besonders nachhaltig zu gestalten, besteht dieses aus Samenpapier. Die Samenp{\"a}ckchen k{\"o}nnen nach der Nutzung also einfach eingepflanzt werden, anstatt diese wegzuwerfen, wodurch unn{\"o}tiger Verpackungsm{\"u}ll vermieden wird. „Herbothecary" dient als Grundlage f{\"u}r den Anbau deines eigenen Apothekergartens.},
  language  = {de}
}
@masterthesis{Buchenroth2021,
  type      = {Bachelor Thesis},
  author    = {Buchenroth, Gina},
  title     = {Hanging shoes: ein Schuhregal f{\"u}r Sneaker},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {122 Seiten},
  year      = {2021},
  abstract  = {Dieses Jahr werden allein in Deutschland ca. 47 Millionen Sneaker verkauft. Die Sneakerbranche boomt und ist nicht mehr aufzuhalten. Was zu Beginn nur ein Sportschuh war, ist heute ein Lifestyleprodukt und auf dem Markt und im Alltag nicht mehr wegzudenken. Der Hype um den neuesten Sneaker ist unglaublich groß und das Bed{\"u}rfnis nach dem Pr{\"a}sentieren und dem zur Schau stellen w{\"a}chst. Mit der float collection gelingt es, den Verkaufs- und Ausstellungsraum ganz individuell und vielseitig zu gestalten. Das Besondere hier ist, dass die Schuhe sich visuell schwebend in den Regalen etablieren und so von allen Seiten betrachtet werden k{\"o}nnen. Das Konstrukt ist modular und bringt durch das Material Metall eine lange Produktlebensdauer mit sich. So bringst du nicht nur die Sneaker, sondern auch die Herzen deiner Kunden zum Schweben. Let the shoes float.},
  language  = {de}
}
@book{Laack2021,
  author    = {Laack, Walter van},
  title     = {Gr{\"o}ßer als das ganze Universum},
  publisher = {van Laack GmbH},
  address   = {Aachen},
  isbn      = {978-3-936624-38-0},
  pages     = {120 Seiten},
  year      = {2021},
  language  = {de}
}
@masterthesis{Cremer2021,
  type      = {Bachelor Thesis},
  author    = {Cremer, Lara},
  title     = {Grenzg{\"a}nger: Japan in Deutschland},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {132 Seiten},
  year      = {2021},
  abstract  = {Durch die enorme geografische und kulturelle Entfernung zwischen Deutschland und Japan entstehen zwischen den beiden Kulturen immer wieder Vorurteile und Missverst{\"a}ndnisse. Diese wurzeln oft in gegenseitiger Kontaktscheue, welche wiederum aus {\"A}ngsten entsteht, sich dem Gegen{\"u}ber nicht angemessen genug verhalten zu k{\"o}nnen, und behindern so an einem authentischen Austausch. Das medien{\"u}bergreifende Nachschlagewerk „Grenzg{\"a}nger" berichtet {\"u}ber verschiedenste Schnittstellen zwischen Deutschland und Japan, die den Austausch und die Zusammenarbeit der beiden L{\"a}nder vorantreiben. Kern dabei ist es, zu zeigen, wie zwei sehr unterschiedliche Kulturen sich doch bei genauerem Hinsehen gleichen und sowohl aus Gemeinsamkeiten als auch Unterschieden lernen und gemeinsam wachsen kann. Es soll Ber{\"u}hrungs{\"a}ngste aufl{\"o}sen und die Rezipierenden inspirieren, offener dem vermeintlich Fremden gegen{\"u}berzutreten. },
  language  = {de}
}
@inproceedings{ChajanSchulteTiggesRekeetal.2021,
  author    = {Chajan, Eduard and Schulte-Tigges, Joschua and Reke, Michael and Ferrein, Alexander and Matheis, Dominik and Walter, Thomas},
  title     = {GPU based model-predictive path control for self-driving vehicles},
  series = {IEEE Intelligent Vehicles Symposium (IV)},
  booktitle = {IEEE Intelligent Vehicles Symposium (IV)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-1-7281-5394-0},
  doi       = {10.1109/IV48863.2021.9575619},
  pages     = {1243 -- 1248},
  year      = {2021},
  abstract  = {One central challenge for self-driving cars is a proper path-planning. Once a trajectory has been found, the next challenge is to accurately and safely follow the precalculated path. The model-predictive controller (MPC) is a common approach for the lateral control of autonomous vehicles. The MPC uses a vehicle dynamics model to predict the future states of the vehicle for a given prediction horizon. However, in order to achieve real-time path control, the computational load is usually large, which leads to short prediction horizons. To deal with the computational load, the control algorithm can be parallelized on the graphics processing unit (GPU). In contrast to the widely used stochastic methods, in this paper we propose a deterministic approach based on grid search. Our approach focuses on systematically discovering the search area with different levels of granularity. To achieve this, we split the optimization algorithm into multiple iterations. The best sequence of each iteration is then used as an initial solution to the next iteration. The granularity increases, resulting in smooth and predictable steering angle sequences. We present a novel GPU-based algorithm and show its accuracy and realtime abilities with a number of real-world experiments.},
  language  = {en}
}
@article{KarschuckKaulenPoghossianetal.2021,
  author    = {Karschuck, Tobias and Kaulen, Corinna and Poghossian, Arshak and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Gold nanoparticle-modified capacitive field-effect sensors: Studying the surface density of nanoparticles and coupling of charged polyelectrolyte macromolecules},
  series = {Electrochemical Science Advances},
  volume    = {2},
  journal   = {Electrochemical Science Advances},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0938-5193},
  doi       = {10.1002/elsa.202100179},
  pages     = {10 Seiten},
  year      = {2021},
  abstract  = {The coupling of ligand-stabilized gold nanoparticles with field-effect devices offers new possibilities for label-free biosensing. In this work, we study the immobilization of aminooctanethiol-stabilized gold nanoparticles (AuAOTs) on the silicon dioxide surface of a capacitive field-effect sensor. The terminal amino group of the AuAOT is well suited for the functionalization with biomolecules. The attachment of the positively-charged AuAOTs on a capacitive field-effect sensor was detected by direct electrical readout using capacitance-voltage and constant capacitance measurements. With a higher particle density on the sensor surface, the measured signal change was correspondingly more pronounced. The results demonstrate the ability of capacitive field-effect sensors for the non-destructive quantitative validation of nanoparticle immobilization. In addition, the electrostatic binding of the polyanion polystyrene sulfonate to the AuAOT-modified sensor surface was studied as a model system for the label-free detection of charged macromolecules. Most likely, this approach can be transferred to the label-free detection of other charged molecules such as enzymes or antibodies.},
  language  = {en}
}
@masterthesis{Wahlefeld2021,
  type      = {Bachelor Thesis},
  author    = {Wahlefeld, Leon},
  title     = {Generative Gestaltung: wie eine Herangehensweise die Zukunft des Designs revolutionieren k{\"o}nnte.},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {188 Seiten},
  year      = {2021},
  abstract  = {Diese Bachelorarbeit setzt sich mit der „Generativen Gestaltung" und ihren M{\"o}glichkeiten f{\"u}r Gestaltende auseinander. Die automatisierte Bearbeitung eines gestalterischen Projektes soll vorrangig Vorteile beim Arbeiten mit großen Datenmengen bieten. Ziel war es, eine Plakatreihe zu entwerfen, die auf der Grundlage eines Codes - also eines strikten Regelwerks - basiert. Mithilfe dieses Verfahrens kann auf Knopfdruck eine beliebige Menge an Plakaten generiert werden. Durch die Festlegung bestimmter Parameter innerhalb des Codes wird gew{\"a}hrleistet, dass jedes ausgespielte Plakat anders ist als sein Vorg{\"a}nger. Diese Arbeit dient als eine erste anskizzierte Grundlage daf{\"u}r, wie grafischer Output automatisiert und vor allem aktualisiert generiert werden kann. Dieses Prinzip kann auf eine Vielzahl von Inhalten und Umsetzungen angewendet werden.},
  language  = {de}
}
@masterthesis{Halstrick2021,
  type      = {Bachelor Thesis},
  author    = {Halstrick, Anna-Marie},
  title     = {Generation Pro Impfen: die Gesellschaft zum Impfen animieren. Eine Aufkl{\"a}rungskampagne f{\"u}r eine h{\"o}here Impfbereitschaft.},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {171 Seiten},
  year      = {2021},
  abstract  = {Jeder hat schon etwas vom Impfen geh{\"o}rt, trotzdem wird es von vielen vernachl{\"a}ssigt. Das Thema Impfen hat besonders im vergangenen Jahr an Relevanz gewonnen. Vor allem durch die Corona-Pandemie wird der Menschheit bewusst, welch wichtige Bedeutung ein Impfstoff hat. Doch auch abgesehen von der Impfung gegen Covid-19 sind Impfungen wichtig f{\"u}r unser aller Gesundheit. Viele lebenswichtige Impfungen werden vernachl{\"a}ssigt oder sind in der {\"o}ffentlichen Wahrnehmung weniger pr{\"a}sent. Genau das soll die Kampagne verhindern. Das Ziel ist es, Jugendliche und junge Erwachsene auf das Thema aufmerksam zu machen. Die Kampagne soll zeigen, dass schon ein kleiner Piekser Leben retten kann. Gleichzeitig bietet sie auch die M{\"o}glichkeit, den Aufruf direkt umzusetzen. Lokale und terminbezogene Veranstaltungen helfen dabei. Dieses Projekt versucht durch eine Info-Tour, der Unwissenheit {\"u}ber Impfungen entgegenzuwirken.},
  language  = {de}
}
@article{RichterBraunsteinStaeudleetal.2021,
  author    = {Richter, Charlotte and Braunstein, Bjoern and St{\"a}udle, Benjamin and Attias, Julia and Suess, Alexander and Weber, Tobias and Mileva, Katja N. and Rittweger, Joern and Green, David A. and Albracht, Kirsten},
  title     = {Gastrocnemius medialis contractile behavior is preserved during 30\% body weight supported gait training},
  series = {Frontiers in Sports and Active Living},
  volume    = {2021},
  journal   = {Frontiers in Sports and Active Living},
  number    = {2},
  publisher = {Frontiers},
  address   = {Lausanne},
  issn      = {2624-9367},
  doi       = {10.3389/fspor.2020.614559},
  pages     = {Artikel 614559},
  year      = {2021},
  abstract  = {Rehabilitative body weight supported gait training aims at restoring walking function as a key element in activities of daily living. Studies demonstrated reductions in muscle and joint forces, while kinematic gait patterns appear to be preserved with up to 30\% weight support. However, the influence of body weight support on muscle architecture, with respect to fascicle and series elastic element behavior is unknown, despite this having potential clinical implications for gait retraining. Eight males (31.9 ± 4.7 years) walked at 75\% of the speed at which they typically transition to running, with 0\% and 30\% body weight support on a lower-body positive pressure treadmill. Gastrocnemius medialis fascicle lengths and pennation angles were measured via ultrasonography. Additionally, joint kinematics were analyzed to determine gastrocnemius medialis muscle-tendon unit lengths, consisting of the muscle's contractile and series elastic elements. Series elastic element length was assessed using a muscle-tendon unit model. Depending on whether data were normally distributed, a paired t-test or Wilcoxon signed rank test was performed to determine if body weight supported walking had any effects on joint kinematics and fascicle-series elastic element behavior. Walking with 30\% body weight support had no statistically significant effect on joint kinematics and peak series elastic element length. Furthermore, at the time when peak series elastic element length was achieved, and on average across the entire stance phase, muscle-tendon unit length, fascicle length, pennation angle, and fascicle velocity were unchanged with respect to body weight support. In accordance with unchanged gait kinematics, preservation of fascicle-series elastic element behavior was observed during walking with 30\% body weight support, which suggests transferability of gait patterns to subsequent unsupported walking.},
  language  = {en}
}
@article{RichterBraunsteinStaeudleetal.2021,
  author    = {Richter, Charlotte and Braunstein, Bj{\"o}rn and St{\"a}udle, Benjamin and Attias, Julia and S{\"u}ss, Alexander and Weber, Tobias and Mileva, Katya N. and Rittweger, J{\"o}rn and Green, David A. and Albracht, Kirsten},
  title     = {Gastrocnemius medialis contractile behavior during running differs between simulated Lunar and Martian gravities},
  series = {Scientific reports},
  volume    = {11},
  journal   = {Scientific reports},
  number    = {Article number: 22555},
  publisher = {Springer Nature},
  address   = {London},
  issn      = {2045-2322},
  doi       = {10.1038/s41598-021-00527-9},
  pages     = {13 Seiten},
  year      = {2021},
  abstract  = {The international partnership of space agencies has agreed to proceed forward to the Moon sustainably. Activities on the Lunar surface (0.16 g) will allow crewmembers to advance the exploration skills needed when expanding human presence to Mars (0.38 g). Whilst data from actual hypogravity activities are limited to the Apollo missions, simulation studies have indicated that ground reaction forces, mechanical work, muscle activation, and joint angles decrease with declining gravity level. However, these alterations in locomotion biomechanics do not necessarily scale to the gravity level, the reduction in gastrocnemius medialis activation even appears to level off around 0.2 g, while muscle activation pattern remains similar. Thus, it is difficult to predict whether gastrocnemius medialis contractile behavior during running on Moon will basically be the same as on Mars. Therefore, this study investigated lower limb joint kinematics and gastrocnemius medialis behavior during running at 1 g, simulated Martian gravity, and simulated Lunar gravity on the vertical treadmill facility. The results indicate that hypogravity-induced alterations in joint kinematics and contractile behavior still persist between simulated running on the Moon and Mars. This contrasts with the concept of a ceiling effect and should be carefully considered when evaluating exercise prescriptions and the transferability of locomotion practiced in Lunar gravity to Martian gravity.},
  language  = {en}
}
@article{ZabirovSchleserBucherer2021,
  author    = {Zabirov, Alexander and Schleser, Markus and Bucherer, Sebastian},
  title     = {F{\"u}ge- und Dichtkonzept f{\"u}r einen Leichtbauverbrennungsmotor},
  series = {adh{\"a}sion KLEBEN \& DICHTEN},
  volume    = {65},
  journal   = {adh{\"a}sion KLEBEN \& DICHTEN},
  number    = {11},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {2192-8681},
  doi       = {10.1007/s35145-021-0531-5},
  pages     = {12 -- 19},
  year      = {2021},
  language  = {de}
}
@article{GoettenFingerHavermannetal.2021,
  author    = {G{\"o}tten, Falk and Finger, Felix and Havermann, Marc and Braun, Carsten and Marino, M. and Bil, C.},
  title     = {Full configuration drag estimation of short-to-medium range fixed-wing UAVs and its impact on initial sizing optimization},
  series = {CEAS Aeronautical Journal},
  volume    = {12},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1869-5590 (Online)},
  doi       = {10.1007/s13272-021-00522-w},
  pages     = {589 -- 603},
  year      = {2021},
  abstract  = {The paper presents the derivation of a new equivalent skin friction coefficient for estimating the parasitic drag of short-to-medium range fixed-wing unmanned aircraft. The new coefficient is derived from an aerodynamic analysis of ten different unmanned aircraft used for surveillance, reconnaissance, and search and rescue missions. The aircraft is simulated using a validated unsteady Reynolds-averaged Navier Stokes approach. The UAV's parasitic drag is significantly influenced by the presence of miscellaneous components like fixed landing gears or electro-optical sensor turrets. These components are responsible for almost half of an unmanned aircraft's total parasitic drag. The new equivalent skin friction coefficient accounts for these effects and is significantly higher compared to other aircraft categories. It is used to initially size an unmanned aircraft for a typical reconnaissance mission. The improved parasitic drag estimation yields a much heavier unmanned aircraft when compared to the sizing results using available drag data of manned aircraft.},
  language  = {en}
}
@masterthesis{Vorholt2021,
  type      = {Bachelor Thesis},
  author    = {Vorholt, Lara},
  title     = {Fitted Fashion: Sizing-L{\"o}sung zur Steigerung der Konversion \& Reduzierung von E-Commerce-Retouren},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {235 Seiten},
  year      = {2021},
  abstract  = {Die Zahl der Nutzenden beim Onlineshopping ist in den letzten Jahren deutlich gewachsen. Eines der gr{\"o}ßten Probleme dabei: Die Retouren. Sowohl die Wirtschaft als auch die Umwelt leiden darunter. Der Hauptgrund f{\"u}r R{\"u}cksendungen sind dabei Schwierigkeiten bei der Auswahl der individuell richtigen Gr{\"o}ße. Das Ziel dieses Projektes ist es daher, eine 3D-K{\"o}rperscan-App zu erstellen. Mit dieser ist es m{\"o}glich, einen auf die eigenen K{\"o}rpermaße angepassten Avatar zu erstellen und eine angepasste Stilberatung f{\"u}r die jeweilige K{\"o}rperform angeboten zu bekommen. Zudem gibt es eine Applikation in Form eines Software Development Kits, welches in Onlineshops eingebunden werden kann. Mit Hilfe der Applikation bekommen Konsumenten die richtige Gr{\"o}ße auch beim Onlineshopping angezeigt und t{\"a}tigen so weniger Fehlk{\"a}ufe. Dies bringt nicht nur Vorteile f{\"u}r die Umwelt mit sich und den Unternehmen eine massive Kostenersparnis durch die Einsparung von Retouren, M{\"u}ll und Personal, sondern schlussendlich auch eine zufriedenere Kundschaft.},
  language  = {de}
}