@inproceedings{AllalBannisterBuismanetal.2022,
  author    = {Allal, D. and Bannister, R. and Buisman, K. and Capriglione, D. and Di Capua, G. and Garc{\´i}a-Patr{\´o}n, M. and Gatzweiler, Thomas and Gellersen, F. and Harzheim, Thomas and Heuermann, Holger and Hoffmann, J. and Izbrodin, A. and Kuhlmann, K. and Lahbacha, K. and Maffucci, A. and Miele, G. and Mubarak, F. and Salter, M. and Pham, T.D. and Sayegh, A. and Singh, D. and Stein, F. and Zeier, M.},
  title     = {RF measurements for future communication applications: an overview},
  series = {2022 IEEE International Symposium on Measurements \& Networking (M\&N)},
  booktitle = {2022 IEEE International Symposium on Measurements \& Networking (M\&N)},
  publisher = {IEEE},
  isbn      = {978-1-6654-8362-9},
  issn      = {2639-5061},
  doi       = {10.1109/MN55117.2022.9887740},
  pages     = {1 -- 6},
  year      = {2022},
  abstract  = {In this paper research activities developed within the FutureCom project are presented. The project, funded by the European Metrology Programme for Innovation and Research (EMPIR), aims at evaluating and characterizing: (i) active devices, (ii) signal- and power integrity of field programmable gate array (FPGA) circuits, (iii) operational performance of electronic circuits in real-world and harsh environments (e.g. below and above ambient temperatures and at different levels of humidity), (iv) passive inter-modulation (PIM) in communication systems considering different values of temperature and humidity corresponding to the typical operating conditions that we can experience in real-world scenarios. An overview of the FutureCom project is provided here, then the research activities are described.},
  language  = {en}
}
@article{PhilippEfthimiouPaganoetal.2022,
  author    = {Philipp, Mohr and Efthimiou, Nikos and Pagano, Fiammetta and Kratochwil, Nicolaus and Pizzichemi, Marco and Tsoumpas, Charalampos and Auffray, Etiennette and Ziemons, Karl},
  title     = {Image reconstruction analysis for positron emission tomography with heterostructured scintillators},
  series = {IEEE Transactions on Radiation and Plasma Medical Sciences},
  volume    = {7},
  journal   = {IEEE Transactions on Radiation and Plasma Medical Sciences},
  number    = {1},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2469-7311},
  doi       = {10.1109/TRPMS.2022.3208615},
  pages     = {41 -- 51},
  year      = {2022},
  abstract  = {The concept of structure engineering has been proposed for exploring the next generation of radiation detectors with improved performance. A TOF-PET geometry with heterostructured scintillators with a pixel size of 3.0×3.1×15 mm3 was simulated using Monte Carlo. The heterostructures consisted of alternating layers of BGO as a dense material with high stopping power and plastic (EJ232) as a fast light emitter. The detector time resolution was calculated as a function of the deposited and shared energy in both materials on an event-by-event basis. While sensitivity was reduced to 32\% for 100 μm thick plastic layers and 52\% for 50 μm, the CTR distribution improved to 204±49 ps and 220±41 ps respectively, compared to 276 ps that we considered for bulk BGO. The complex distribution of timing resolutions was accounted for in the reconstruction. We divided the events into three groups based on their CTR and modeled them with different Gaussian TOF kernels. On a NEMA IQ phantom, the heterostructures had better contrast recovery in early iterations. On the other hand, BGO achieved a better contrast to noise ratio (CNR) after the 15th iteration due to the higher sensitivity. The developed simulation and reconstruction methods constitute new tools for evaluating different detector designs with complex time responses.},
  language  = {en}
}
@incollection{HinkeVervierBrauneretal.2022,
  author    = {Hinke, Christian and Vervier, Luisa and Brauner, Philipp and Schneider, Sebastian and Steuer-Dankert, Linda and Ziefle, Martina and Leicht-Scholten, Carmen},
  title     = {Capability configuration in next generation manufacturing},
  series = {Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models},
  booktitle = {Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-07733-3},
  doi       = {10.1007/978-3-031-07734-0_6},
  pages     = {95 -- 106},
  year      = {2022},
  abstract  = {Industrial production systems are facing radical change in multiple dimensions. This change is caused by technological developments and the digital transformation of production, as well as the call for political and social change to facilitate a transformation toward sustainability. These changes affect both the capabilities of production systems and companies and the design of higher education and educational programs. Given the high uncertainty in the likelihood of occurrence and the technical, economic, and societal impacts of these concepts, we conducted a technology foresight study, in the form of a real-time Delphi analysis, to derive reliable future scenarios featuring the next generation of manufacturing systems. This chapter presents the capabilities dimension and describes each projection in detail, offering current case study examples and discussing related research, as well as implications for policy makers and firms. Specifically, we discuss the benefits of capturing expert knowledge and making it accessible to newcomers, especially in highly specialized industries. The experts argue that in order to cope with the challenges and circumstances of today's world, students must already during their education at university learn how to work with AI and other technologies. This means that study programs must change and that universities must adapt their structural aspects to meet the needs of the students.},
  language  = {en}
}
@incollection{SteuerDankertLeichtScholten2022,
  author    = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen},
  title     = {Perceiving diversity : an explorative approach in a complex research organization.},
  series = {Diversity and discrimination in research organizations},
  booktitle = {Diversity and discrimination in research organizations},
  publisher = {Emerald Publishing Limited},
  address   = {Bingley},
  isbn      = {978-1-80117-959-1 (Print)},
  doi       = {10.1108/978-1-80117-956-020221010},
  pages     = {365 -- 392},
  year      = {2022},
  abstract  = {Diversity management is seen as a decisive factor for ensuring the development of socially responsible innovations (Beacham and Shambaugh, 2011; Sonntag, 2014; L{\´o}pez, 2015; Uebernickel et al., 2015). However, many diversity management approaches fail due to a one-sided consideration of diversity (Thomas and Ely, 2019) and a lacking linkage between the prevailing organizational culture and the perception of diversity in the respective organization. Reflecting the importance of diverse perspectives, research institutions have a special responsibility to actively deal with diversity, as they are publicly funded institutions that drive socially relevant development and educate future generations of developers, leaders and decision-makers. Nevertheless, only a few studies have so far dealt with the influence of the special framework conditions of the science system on diversity management. Focusing on the interdependency of the organizational culture and diversity management especially in a university research environment, this chapter aims in a first step to provide a theoretical perspective on the framework conditions of a complex research organization in Germany in order to understand the system-specific factors influencing diversity management. In a second step, an exploratory cluster analysis is presented, investigating the perception of diversity and possible influencing factors moderating this perception in a scientific organization. Combining both steps, the results show specific mechanisms and structures of the university research environment that have an impact on diversity management and rigidify structural barriers preventing an increase of diversity. The quantitative study also points out that the management level takes on a special role model function in the scientific system and thus has an influence on the perception of diversity. Consequently, when developing diversity management approaches in research organizations, it is necessary to consider the top-down direction of action, the special nature of organizational structures in the university research environment as well as the special role of the professorial level as role model for the scientific staff.},
  language  = {en}
}
@incollection{StriebingMuellerSchraudneretal.2022,
  author    = {Striebing, Clemens and M{\"u}ller, J{\"o}rg and Schraudner, Martina and Gewinner, Irina Valerie and Guerrero Morales, Patricia and Hochfeld, Katharina and Hoffman, Shekinah and Kmec, Julie A. and Nguyen, Huu Minh and Schneider, Jannick and Sheridan, Jennifer and Steuer-Dankert, Linda and Trimble O'Connor, Lindsey and Vandevelde-Rougale, Agn{\`e}s},
  title     = {Promoting diversity and combatting discrimination in research organizations: a practitioner's guide},
  series = {Diversity and discrimination in research organizations},
  booktitle = {Diversity and discrimination in research organizations},
  publisher = {Emerald Publishing Limited},
  address   = {Bingley},
  isbn      = {978-1-80117-959-1 (Print)},
  doi       = {10.1108/978-1-80117-956-020221012},
  pages     = {421 -- 442},
  year      = {2022},
  abstract  = {The essay is addressed to practitioners in research management and from academic leadership. It describes which measures can contribute to creating an inclusive climate for research teams and preventing and effectively dealing with discrimination. The practical recommendations consider the policy and organizational levels, as well as the individual perspective of research managers. Following a series of basic recommendations, six lessons learned are formulated, derived from the contributions to the edited collection on "Diversity and Discrimination in Research Organizations."},
  language  = {en}
}
@masterthesis{Geilhausen2022,
  type      = {Bachelor Thesis},
  author    = {Geilhausen, Ayleen},
  title     = {SUE : Restauranterlebnisse neu gestalten},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {121 Seiten},
  year      = {2022},
  abstract  = {Gastronomiebetriebe, insbesondere diese ohne zeitgem{\"a}ße und durchdachte Konzepte wurden durch die Pandemie stark getroffen. W{\"a}hrend große Fast-Food-Ketten bereits vor der Pandemie digitale L{\"o}sungen einsetzten, stehen nun auch andere Restaurantbetreiber:innen vor der Herausforderung der Digitalisierung. Gerade die Pandemie hat an dieser Stelle verdeutlicht, welche Restaurants ihre Prozesse im Sinne der User Experience durchdacht haben und welche nicht. Die Tisch-Stuhl-Kombination der „SUE"-Serie bietet Restaurants, smarte und elegante Gastronomiem{\"o}bel, die je nach Konzept in Materialit{\"a}t und Farbe frei anpassbar sind. Wandelbarkeit, Komfort und die Integration digitaler L{\"o}sungen sind die Kernkompetenzen und Anforderungen, die das Gastronomie-Interior in Zukunft erf{\"u}llen muss. Der smarte Bistrotisch und der wandelbare Stuhl der „SUE"-Serie zeigt einen digitalisierten und anpassbaren L{\"o}sungsansatz.},
  language  = {de}
}
@inproceedings{ZaehlBiewendtWolfetal.2022,
  author    = {Z{\"a}hl, Philipp M. and Biewendt, Marcel and Wolf, Martin and Eggert, Mathias},
  title     = {Requirements for Competence Developing Games in the Environment of SE Competence Development},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2022},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2022},
  publisher = {GITO},
  address   = {Berlin},
  isbn      = {978-3-95545-409-8},
  doi       = {10.30844/AKWI_2022_05},
  pages     = {73 -- 88},
  year      = {2022},
  abstract  = {Many of today's factors make software development more and more complex, such as time pressure, new technologies, IT security risks, et cetera. Thus, a good preparation of current as well as future software developers in terms of a good software engineering education becomes progressively important. As current research shows, Competence Developing Games (CDGs) and Serious Games can offer a potential solution. This paper identifies the necessary requirements for CDGs to be conducive in principle, but especially in software engineering (SE) education. For this purpose, the current state of research was summarized in the context of a literature review. Afterwards, some of the identified requirements as well as some additional requirements were evaluated by a survey in terms of subjective relevance.},
  language  = {en}
}
@masterthesis{Buhr2022,
  type      = {Bachelor Thesis},
  author    = {Buhr, Amelie},
  title     = {Entschleunigen : warum unser Modekonsum verlangsamt werden muss},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {141 Seiten},
  year      = {2022},
  abstract  = {In Zeiten von Schnelllebigkeit {\"a}ndern immer mehr Menschen bewusst ihren Umgang mit allt{\"a}glichen Dingen. Was dabei h{\"a}ufig in den Hintergrund r{\"u}ckt, ist das Thema "bewusste Kleidung". Beeinflusst durch sogenannte Fast-Fashion-Modeketten und Social Media leben wir in einer regelrechten Wegwerfgesellschaft. „Entschleunigen" besch{\"a}ftigt sich mit den Schattenseiten der Modeindustrie, zeigt aber ebenso (neue) Wege auf, die auf eine bessere Zukunft f{\"u}r uns und unsere Umwelt hoffen lassen. Aufgeteilt in zwei Kapitel gibt „Entschleunigen" einen Einblick in den {\"o}kologischen und sozialen Fußabdruck der Modeindustrie und stellt zum anderen die Gegenseite vor, bei der Wert auf faire Produktion und Nachhaltigkeit gelegt wird. Das Buch „Entschleunigen" soll {\"u}ber die Missst{\"a}nde in der Textilbranche informieren, jedoch im Umkehrschluss dazu motivieren, diese mit einfachen Mitteln zu verbessern.},
  language  = {de}
}
@masterthesis{Cekic2022,
  type      = {Bachelor Thesis},
  author    = {Cekic, Dilara},
  title     = {Visionsbild eines BMW AG internen Tools : Optimierung einer datenzentrierten Plattform der BMW AG},
  publisher = {FH Aachen},
  address   = {Aachen},
  year      = {2022},
  abstract  = {Die BMW AG verfolgt mehrere Ans{\"a}tze eine optimierte Effizienzsteigerung durch eigens entwickelte Softwaretools zu erreichen. Der Fokus hierbei liegt in der Erm{\"o}glichung einer datenzentrierten, nutzerorientierten und hochautomatisierten Fahrzeugentwicklung. Das eigen von der BMW AG entwickelte Software-Tool „Parts List" dient als digitale Bauteilliste f{\"u}r Entwicklungsteams. Das Tool b{\"u}ndelt mehrere Datenbanken und stellt diese in Echtzeit zur Verf{\"u}gung. Somit kann der manuelle Pflegeaufwand erheblich reduziert und eine Durchg{\"a}ngigkeit einer Vielzahl von Daten erm{\"o}glicht werden. Der Fokus der Abschlussarbeit liegt in der konzeptionellen und gestalterischen Optimierung des Tools. Dabei wird insbesondere der User Centered Design Prozess betrachtet, bei dem die Nutzer bzw. die Entwicklungsteams im Zentrum stehen.},
  language  = {de}
}
@masterthesis{Crott2022,
  type      = {Bachelor Thesis},
  author    = {Crott, Anne},
  title     = {Textil- und Industriemuseum (TIM) Augsburg : Entwicklung eines neuen Erscheinungsbildes},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {131 Seiten},
  year      = {2022},
  abstract  = {Die Stadt Augsburg war eine der gr{\"o}ßten Textilst{\"a}dte Europas. Seit 2010 pr{\"a}sentiert das Textil- und Industriemuseum (TIM) eine Vielzahl von Exponaten in der alten Kammgarnspinnerei im ehemaligen Augsburger Textilviertel und ist somit ein wichtiger Bestandteil der bayrischen Museumslandschaft und deutschen Textilgeschichte. Neben seiner besonderen Lage {\"u}berzeugt das TIM vor allem mit einer großen Musterbuchsammlung. Im Fokus des in dieser Arbeit neugestalteten Erscheinungsbildes stehen die verschiedenen Muster, die den textilen Schwerpunkt in den Vordergrund r{\"u}cken und dem Museum damit einen einpr{\"a}gsamen Wiedererkennungswert geben. Mithilfe des neuen Corporate Designs soll das Museum f{\"u}r regionale und {\"u}berregionale Besucher:innen attraktiver gemacht und somit die einmalige geschichtliche Bedeutung vermittelt und erhalten werden.},
  language  = {de}
}
@masterthesis{Franca2022,
  type      = {Bachelor Thesis},
  author    = {Franca, Erma},
  title     = {Cai : eine Orientierungshilfe f{\"u}r Gefl{\"u}chtete und Migrant*innen in Deutschland},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {161 Seiten},
  year      = {2022},
  abstract  = {Migration und Integration sind weltweit zwei allseits aktuelle Themen. Umso wichtiger ist es, die Ankunft und Integration von Migrant:innen und Gefl{\"u}chteten so anschaulich wie nur m{\"o}glich zu gestalten. Die Zielsetzung der Arbeit „Cai - Your guide through Germany" ist es eine digitale Anwendung in Form einer App zu konzipieren, die Gefl{\"u}chtete und Migrant:innen in Deutschland w{\"a}hrend des Migrations- und Integrationsprozesses unterst{\"u}tzt. Dies gelingt durch das strukturierte und themenspezifische Herantragen von notwendigen Informationen, Organisation sowie Selbsthilfeangeboten an die unterschiedlichen Zielgruppen. Unter der Ber{\"u}cksichtigung des Migrationsgrundes und des Standortes wird eine Ausgangssituation geschaffen mit individuellen Bed{\"u}rfnissen und Fragen, die es zu beantworten gilt. W{\"a}hrend Nutzer:innen durch „Cai" digital, selbstst{\"a}ndig und schnell an Informationen gelangen, werden gleichzeitig Beh{\"o}rden und Anlaufstellen sowie ihre Leistungen und Schwerpunkte aufgef{\"u}hrt, die Betroffene bei weiteren Anliegen aufsuchen k{\"o}nnen, um Unterst{\"u}tzung zu erhalten. Im Rahmen dieser Bachelorarbeit fokussiert sich das Projekt auf die Migrationsgruppe der Gefl{\"u}chteten sowie ihre Fragen, Herausforderungen und Bed{\"u}rfnisse in Deutschland.},
  language  = {de}
}
@masterthesis{Theis2022,
  type      = {Bachelor Thesis},
  author    = {Theis, Alina Naomi},
  title     = {Nur ein Freitag : Ein Kurzfilm {\"u}ber Verlust und Freundschaft im Schatten des Zweiten Weltkrieges.},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {103 Seiten},
  year      = {2022},
  abstract  = {Der Film zeigt die wahre Geschichte des 15-j{\"a}hrigen Hans Jokisch, welche auf den Erz{\"a}hlungen seiner j{\"u}ngeren Schwester, der Zeitzeugin Maria Theis (geb. Jokisch), beruhen. Der Fokus liegt auf der Sichtweise von Kindern und Jugendlichen, einer Generation, die mit dem und im Zweiten Weltkrieg aufgewachsen ist und die gleichzeitig die letzte Generation ist, die uns das Erlebte noch aus erster Hand berichten kann. Hans gelangt mit seiner Familie nach einer harten Flucht vor der Frontlinie zur{\"u}ck in seine Heimat in Schlesien. Doch ihr geliebtes Heim ist besetzt von Familie Sch{\"o}ppe. Sie haben keine Wahl, die beiden Familien m{\"u}ssen sich das Haus von nun an teilen. Im Laufe der Zeit wird das Jokisch Haus auch f{\"u}r Familie Sch{\"o}ppe ein Zuhause und Hans freundet sich mit dem Jungen Bruno Sch{\"o}ppe an. Als Deutschland 1945 kapituliert und Schlesien nun zu Polen geh{\"o}rt, m{\"u}ssen pl{\"o}tzlich beide Familien endg{\"u}ltig das Haus und all ihren Besitz zur{\"u}cklassen. Hans und Bruno beschließen, die Zwangsenteignung nicht hinzunehmen, doch ihr naiver Plan wird ihnen fast zum Verh{\"a}ngnis.},
  language  = {de}
}
@masterthesis{Treutlein2022,
  type      = {Bachelor Thesis},
  author    = {Treutlein, Antonia},
  title     = {Entwicklung eines Erscheinungsbildes f{\"u}r die Meeresschutzorganisation Ocean Care},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {99 Seiten},
  year      = {2022},
  abstract  = {Ocean Care ist eine politisch unabh{\"a}ngige Non-Profit-Organisation mit Sitz in der Schweiz. Sie setzt sich seit 1989 f{\"u}r den Schutz von Meeress{\"a}ugern und deren Lebensraum ein. Seit 2011 ist Ocean Care außerdem UN-Sonderberaterin f{\"u}r Fragen im Meeresschutz. Da Ocean Care die {\"O}ffentlichkeit f{\"u}r das Thema Meeresschutz sensibilisieren m{\"o}chte und ihre Arbeit durch Spenden finanziert wird, ist ein professionelles, vertrauenerweckendes Erscheinungsbild unerl{\"a}sslich. Durch ein zeitgem{\"a}ßes und seri{\"o}ses Design, welches sich von anderen Organisationen abhebt, kann die Zielgruppe erweitert und die Bedeutsamkeit der Arbeit hervorgehoben werden. Das neue Erscheinungsbild beruht auf der Idee, dass sich die Informationen unter der Meeresoberfl{\"a}che befinden. Die Linie, die den Meeresspiegel visualisiert, dient außerdem medien{\"u}bergreifend als Orientierungshilfe.},
  language  = {de}
}
@masterthesis{Wetzlar2022,
  type      = {Bachelor Thesis},
  author    = {Wetzlar, Jana},
  title     = {Vielgut Festival 2022 : Etablierung eines neuen Musikfestivals in Aachen},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {45 Seiten},
  year      = {2022},
  abstract  = {Endlich! Nach {\"u}ber zwei Jahren kulturellen Stillstands richtet der Musiknetzwerk Aachen e.V. ein Festival aus. Die Bachelorandin Jana Wetzlar {\"u}bernimmt hierbei die Veranstaltungsplanung und -bewerbung. Der erste Teil der Arbeit umfasst die Erarbeitung eines einzigartigen Festivalkonzepts, bei dem die F{\"o}rderung von jungen Newcomerk{\"u}nstler:innen und die {\"o}kologische Nachhaltigkeit der Veranstaltung im Vordergrund stehen. Eine weitere Besonderheit stellt das parit{\"a}tisch besetzte K{\"u}nstler:innen-Line-Up dar. Im zweiten Teil der Arbeit wurden eine umfangreiche Werbekampagne sowie ein passendes Corporate Design entwickelt, die die Besonderheiten des Festivals hervorheben und viele Festivalbesucher:innen generieren sollen. Die {\"u}bergeordneten Ziele der Arbeit bestehen darin, einen Beitrag zur gesellschaftlichen Etablierung des Musiknetzwerk Aachen e.V. zu leisten und die Voraussetzungen f{\"u}r ein j{\"a}hrlich wiederkehrendes Festival zu schaffen.},
  language  = {de}
}
@masterthesis{Wolf2022,
  type      = {Bachelor Thesis},
  author    = {Wolf, Nina},
  title     = {Koexistieren : Die Stufen der Mensch-Tier-Beziehung - Vom Nutztier bis zum Personenrecht},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {114 Seiten},
  year      = {2022},
  abstract  = {Seit 2002 ist der Tierschutz fest im Grundgesetz verankert, jedoch herrscht immer noch ein enormes Ungleichgewicht bei der letztendlichen Durchsetzung gegen{\"u}ber der Tiernutzungsinteressen. Die Nichteinhaltung des Tierschutzes stellt nicht nur aus Tierwohlsicht, sondern auch aus Klimaschutzgr{\"u}nden eine ernst zu nehmende Problematik dar, welche wir nur gemeinsam angehen k{\"o}nnen. Die Gesellschaft sollte sich {\"u}ber das eigene Konsumverhalten bewusst werden, gleichermaßen m{\"u}ssen auch {\"u}berzeugende Alternativen aufgezeigt werden. Thematisch ist die Arbeit in drei Teile gegliedert. Die Geschichte, das Recht der Tiere und die Zukunftsaussichten stehen hier im Fokus. Wichtig ist es, den Istzustand neutral darzustellen, um die Fakten nicht zu harmonisieren. Die Publikation soll nicht abschrecken, vielmehr soll sie die Leser:innen motivieren, Dinge {\"a}ndern zu wollen. Denn nur miteinander k{\"o}nnen wir friedlich „koexistieren".},
  language  = {de}
}
@masterthesis{Freh2022,
  type      = {Bachelor Thesis},
  author    = {Freh, Katharine},
  title     = {The Distance : ein dystpischer Kurzfilm},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {53 Seiten},
  year      = {2022},
  abstract  = {"THE DISTANCE" ist ein fiktionaler, dystopischer Kurzfilm, welcher sich mit dem Leben in einem diktatorischen Polizeistaat auseinandersetzt. Jegliche Art von Aufstand oder negativer {\"A}ußerung dem Staat gegen{\"u}ber ist untersagt und wird hoch bestraft. Ziel dieser Arbeit ist es, die Zuschauer:innen zum Denken und zum Hinterfragen gesellschaftlicher Strukturen anzuregen. Durch passende Kost{\"u}me, Locations und Set-Design entsteht eine d{\"u}stere und unbehagliche Atmosph{\"a}re. Die passende Musik und das Sounddesign unterst{\"u}tzen diese Atmosph{\"a}re und geben den Zuschauer:innen einen guten Einblick in diese neue Welt. Zuletzt stellt sich die Frage, ob Dystopien {\"u}berhaupt noch fiktional sind oder doch schon zu unserer Realit{\"a}t geworden sind.},
  language  = {de}
}
@masterthesis{Laubkermeier2022,
  type      = {Bachelor Thesis},
  author    = {Laubkermeier, Kim},
  title     = {trust me},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {94 Seiten},
  year      = {2022},
  abstract  = {"trust me" ist eine schwarz-weiß Fotoserie, pr{\"a}sentiert als Diashow mit unterlegtem Soundtrack. Es geht um das Vertrauen zwischen Model, Fotografin und Betrachter:innen. Die Darsteller sind ausschließlich homosexuelle M{\"a}nner und begeben sich in intime Situationen und Posen. Die Fotos sind {\"u}berwiegend Aktaufnahmen und nehmen eine pornografische Richtung an. Die Fragestellung zu Beginn war, wie weit vertrauen die unerfahrenen Models der Fotografin und was sind diese bereit, von sich zu zeigen. Die offene Kommunikation {\"u}ber die Richtung des Projekts war die essenzielle Basis f{\"u}r die Fotoshootings. W{\"a}hrend des Fotografierens lag der Fokus auf m{\"o}glichst verschiedenen Blickwinkeln, Kulissen, Ausleuchtungen und Motiven. Zus{\"a}tzlich war der sensible Umgang mit den M{\"a}nnern eine Vertrauensprobe."trust me" l{\"a}sst auf diversen Ebenen tief blicken und zeigt, wie loslassen aussieht.},
  language  = {de}
}
@incollection{Alt2022,
  author    = {Alt, Helmut},
  title     = {Speicher speichern, Leiter leiten},
  series = {Generationenprojekt Energiewende : Elektroenergiepolitik im Spannungsfeld zwischen Vision und Mission / Herbert Niederhausen (Hrsg.)},
  booktitle = {Generationenprojekt Energiewende : Elektroenergiepolitik im Spannungsfeld zwischen Vision und Mission / Herbert Niederhausen (Hrsg.)},
  publisher = {Books on Demand},
  address   = {Norderstedt},
  isbn      = {9783755774389},
  pages     = {125 -- 136},
  year      = {2022},
  language  = {de}
}
@article{UysalCreutzFiratetal.2022,
  author    = {Uysal, Karya and Creutz, Till and Firat, Ipek Seda and Artmann, Gerhard and Teusch, Nicole and Temiz Artmann, Ayseg{\"u}l},
  title     = {Bio-functionalized ultra-thin, large-area and waterproof silicone membranes for biomechanical cellular loading and compliance experiments},
  series = {Polymers},
  volume    = {14},
  journal   = {Polymers},
  number    = {11},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4360},
  pages     = {2213},
  year      = {2022},
  abstract  = {Biocompatibility, flexibility and durability make polydimethylsiloxane (PDMS) membranes top candidates in biomedical applications. CellDrum technology uses large area, <10 µm thin membranes as mechanical stress sensors of thin cell layers. For this to be successful, the properties (thickness, temperature, dust, wrinkles, etc.) must be precisely controlled. The following parameters of membrane fabrication by means of the Floating-on-Water (FoW) method were investigated: (1) PDMS volume, (2) ambient temperature, (3) membrane deflection and (4) membrane mechanical compliance. Significant differences were found between all PDMS volumes and thicknesses tested (p < 0.01). They also differed from the calculated values. At room temperatures between 22 and 26 °C, significant differences in average thickness values were found, as well as a continuous decrease in thicknesses within a 4 °C temperature elevation. No correlation was found between the membrane thickness groups (between 3-4 µm) in terms of deflection and compliance. We successfully present a fabrication method for thin bio-functionalized membranes in conjunction with a four-step quality management system. The results highlight the importance of tight regulation of production parameters through quality control. The use of membranes described here could also become the basis for material testing on thin, viscous layers such as polymers, dyes and adhesives, which goes far beyond biological applications.},
  language  = {en}
}
@masterthesis{Nelles2022,
  type      = {Bachelor Thesis},
  author    = {Nelles, Charlene},
  title     = {Brain Hack},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {77 Seiten},
  year      = {2022},
  abstract  = {Protagonistin des Films ist Cassandra Becker, eine 25-j{\"a}hrige Informatikstudentin und Mitglied der Hackerorganisation PFABW (Progress For a Better World). Sie hat es sich zum Ziel gesetzt, die Welt zu einem besseren Ort zu machen. Sie legt sich allerdings mit den falschen Leuten an und wird f{\"u}r die Verbreitung eines zerst{\"o}rerischen Computervirus verantwortlich gemacht, der gesundheitliche Folgen f{\"u}r den Menschen mit sich bringt. Sie und ihr bester Freund Jake Fischer haben bei einem PFABW-Mitglied Zuflucht gefunden. Dort versuchen sie gemeinsam herauszufinden, was es mit dem mysteri{\"o}sen Virus auf sich hat.},
  language  = {de}
}
@book{KurzSchwer2022,
  author    = {Kurz, Melanie and Schwer, Thilo},
  title     = {Geschichte des Designs},
  edition   = {1. Auflage},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-78813-0},
  pages     = {128 Seiten},
  year      = {2022},
  abstract  = {Dieser Band bietet einen kompakten {\"U}berblick {\"u}ber die wichtigsten Stationen des Produktdesigns vom Beginn der Industrialisierung bis heute. Im Zentrum stehen ikonische Alltagsgegenst{\"a}nde vom Thonet-Stuhl bis zum iPhone. Anschaulich und kenntnisreich nehmen Melanie Kurz und Thilo Schwer dabei auch die gesellschaftspolitische Situation, in der die Objekte entstanden sind, in den Blick.},
  language  = {de}
}
@masterthesis{Schiffers2022,
  type      = {Bachelor Thesis},
  author    = {Schiffers, Simon},
  title     = {Historische Stoffe im Spielfilm : Zwischen Authentizit{\"a}t und Unterhaltung},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {107 Seiten},
  year      = {2022},
  abstract  = {Historische Stoffe im Spielfilm Zwischen Authentizit{\"a}t und Unterhaltung Spielfilme {\"u}ber wahre Begebenheiten stellen sich der Herausforderung, historisch korrekte Darstellung mit einer spannenden und sehenswerten Pr{\"a}sentation zu kombinieren. Dies ist ein schwieriger Balance Akt, gerade bei Studentenprojekten mit geringem Budget. Im Kurzfilm {\"u}ber Julius Erasmus, dem „Totengr{\"a}ber von Vossenack", wurde sich dieser Aufgabe gestellt. Inhaltlich werden seine m{\"o}glichen Beweggr{\"u}nde dargestellt, die ihn dazu brachten kurz nach dem 2. Weltkrieg zahlreiche gefallene Soldaten im ehemaligen Kampfgebiet im H{\"u}rtgenwald zu begraben. Die schriftliche Dokumentation des Projektes zeigt die Recherche des verfilmten Stoffes, Herausforderungen w{\"a}hrend der Produktion, sowie pers{\"o}nliche Eindr{\"u}cke und Lerneffekte. Letztendlich ist ein Werk entstanden, dass respektvoll mit der zu Grunde liegenden Geschichte umgeht und gleichsam ein cineastisches Erlebnis f{\"u}r den Zuschauer darstellt.},
  language  = {de}
}
@masterthesis{Surowiec2022,
  type      = {Bachelor Thesis},
  author    = {Surowiec, Julia Andrea},
  title     = {Das wahre Gewicht des Smartphones : eine informative Erfahrung zu den {\"o}kologischen Auswirkungen},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {70 Seiten},
  year      = {2022},
  abstract  = {Das Smartphone geh{\"o}rt zu den innovativsten Ger{\"a}ten unserer Zeit und befindet sich in einem st{\"a}ndigen Wandel, der nach immer mehr Leistung, gr{\"o}ßeren Displays und besseren Kameras strebt. Mit neuen Modellen, die j{\"a}hrlich auf den Markt kommen und den Milliarden Smartphones, die verkauft werden, entsteht aber nicht nur ein großer Markt voller Angebote, sondern gleichzeitig große Probleme f{\"u}r unsere Umwelt und letztlich auch f{\"u}r uns. Die Smartphone-Industrie schadet massiv unserem {\"O}kosystem. Das Ziel der Arbeit ist die Aufkl{\"a}rung {\"u}ber die Auswirkungen der Smartphone-Industrie. Daf{\"u}r wurden Visualisierung zu Daten und Prozessen gestaltet, die viele Aspekte des Lebenszyklus des Smartphones mit einbeziehen. Die Betrachter:innen sollen so informativ aufgekl{\"a}rt werden, ihren eigenen Konsum zu dem Thema {\"u}berdenken und ein Bewusstsein f{\"u}r ihren Elektronikverbrauch entwickeln.},
  language  = {de}
}
@inproceedings{HorikawaAshikagaYamaguchietal.2022,
  author    = {Horikawa, Atsushi and Ashikaga, Mitsugu and Yamaguchi, Masato and Ogino, Tomoyuki and Aoki, Shigeki and Wirsum, Manfred and Funke, Harald and Kusterer, Karsten},
  title     = {Combined heat and power supply demonstration of Micro-Mix Hydrogen Combustion Applied to M1A-17 Gas Turbine},
  series = {Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)},
  booktitle = {Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)},
  publisher = {American Society of Mechanical Engineers},
  address   = {Fairfield},
  isbn      = {978-0-7918-8599-4},
  doi       = {10.1115/GT2022-81620},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {Kawasaki Heavy Industries, Ltd. (KHI), Aachen University of Applied Sciences, and B\&B-AGEMA GmbH have investigated the potential of low NOx micro-mix (MMX) hydrogen combustion and its application to an industrial gas turbine combustor. Engine demonstration tests of a MMX combustor for the M1A-17 gas turbine with a co-generation system were conducted in the hydrogen-fueled power generation plant in Kobe City, Japan. This paper presents the results of the commissioning test and the combined heat and power (CHP) supply demonstration. In the commissioning test, grid interconnection, loading tests and load cut-off tests were successfully conducted. All measurement results satisfied the Japanese environmental regulation values. Dust and soot as well as SOx were not detected. The NOx emissions were below 84 ppmv at 15 \% O2. The noise level at the site boundary was below 60 dB. The vibration at the site boundary was below 45 dB. During the combined heat and power supply demonstration, heat and power were supplied to neighboring public facilities with the MMX combustion technology and 100 \% hydrogen fuel. The electric power output reached 1800 kW at which the NOx emissions were 72 ppmv at 15 \% O2, and 60 \%RH. Combustion instabilities were not observed. The gas turbine efficiency was improved by about 1 \% compared to a non-premixed type combustor with water injection as NOx reduction method. During a total equivalent operation time of 1040 hours, all combustor parts, the M1A-17 gas turbine as such, and the co-generation system were without any issues.},
  language  = {en}
}
@article{FunkeBeckmann2022,
  author    = {Funke, Harald and Beckmann, Nils},
  title     = {Flexible fuel operation of a Dry-Low-NOx Micromix Combustor with Variable Hydrogen Methane Mixture},
  series = {International Journal of Gas Turbine, Propulsion and Power Systems},
  volume    = {13},
  journal   = {International Journal of Gas Turbine, Propulsion and Power Systems},
  number    = {2},
  issn      = {1882-5079},
  pages     = {1 -- 7},
  year      = {2022},
  abstract  = {The role of hydrogen (H2) as a carbon-free energy carrier is discussed since decades for reducing greenhouse gas emissions. As bridge technology towards a hydrogen-based energy supply, fuel mixtures of natural gas or methane (CH4) and hydrogen are possible. The paper presents the first test results of a low-emission Micromix combustor designed for flexible-fuel operation with variable H2/CH4 mixtures. The numerical and experimental approach for considering variable fuel mixtures instead of recently investigated pure hydrogen is described. In the experimental studies, a first generation FuelFlex Micromix combustor geometry is tested at atmospheric pressure at gas turbine operating conditions corresponding to part- and full-load. The H2/CH4 fuel mixture composition is varied between 57 and 100 vol.\% hydrogen content. Despite the challenges flexible-fuel operation poses onto the design of a combustion system, the evaluated FuelFlex Micromix prototype shows a significant low NOx performance},
  language  = {en}
}
@inproceedings{TranTrinhDaoetal.2022,
  author    = {Tran, Ngoc Trinh and Trinh, Tu Luc and Dao, Ngoc Tien and Giap, Van Tan and Truong, Manh Khuyen and Dinh, Thuy Ha and Staat, Manfred},
  title     = {Limit and shakedown analysis of structures under random strength},
  series = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training, Hanoi, December 2-3, 2022},
  booktitle = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training, Hanoi, December 2-3, 2022},
  publisher = {Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)},
  address   = {Hanoi},
  isbn      = {978-604-357-084-7},
  pages     = {510 -- 518},
  year      = {2022},
  abstract  = {Direct methods comprising limit and shakedown analysis is a branch of computational mechanics. It plays a significant role in mechanical and civil engineering design. The concept of direct method aims to determinate the ultimate load bearing capacity of structures beyond the elastic range. For practical problems, the direct methods lead to nonlinear convex optimization problems with a large number of variables and onstraints. If strength and loading are random quantities, the problem of shakedown analysis is considered as stochastic programming. This paper presents a method so called chance constrained programming, an effective method of stochastic programming, to solve shakedown analysis problem under random condition of strength. In this our investigation, the loading is deterministic, the strength is distributed as normal or lognormal variables.},
  language  = {en}
}
@inproceedings{MilijašŠakićMarinkovićetal.2022,
  author    = {Milijaš, Aleksa and Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph and Gams, Matija and Klinkel, Sven},
  title     = {Effects of prior in-plane damage on out-of-plane response of masonry infills with openings},
  series = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  editor    = {Arion, Cristian and Scupin, Alexandra and Ţigănescu, Alexandru},
  isbn      = {978-973-100-533-1},
  pages     = {2747 -- 2756},
  year      = {2022},
  abstract  = {Masonry infill walls are the most traditional enclosure system that is still widely used in RC frame buildings all over the world, particularly in seismic active regions. Although infill walls are usually neglected in seismic design, during an earthquake event they are subjected to in-plane and out-of-plane forces that can act separately or simultaneously. Since observations of damage to buildings after recent earthquakes showed detrimental effects of in-plane and out-of-plane load interaction on infill walls, the number of studies that focus on influence of in-plane damage on out-of-plane response has significantly increased. However, most of the xperimental campaigns have considered only solid infills and there is a lack of combined in-plane and out-of-plane experimental tests on masonry infills with openings, although windows and doors strongly affect seismic performance. In this paper, two types of experimental tests on infills with window openings are presented. The first is a pure out-of-plane test and the second one is a sequential in-plane and out-of-plane test aimed at investigating the effects of existing in-plane damage on outof-plane response. Additionally, findings from two tests with similar load procedure that were carried out on fully infilled RC frames in the scope of the same project are used for comparison. Test results clearly show that window opening increased vulnerability of infills to combined seismic actions and that prevention of damage in infills with openings is of the utmost importance for seismic safety.},
  language  = {en}
}
@inproceedings{RigaPitilakisButenwegetal.2022,
  author    = {Riga, Evi and Pitilakis, Kyriazis and Butenweg, Christoph and Apostolaki, Stefania and Karatzetzou, Anna},
  title     = {Investigating the impact of the new European Seismic Hazard Model ESHM20 on the seismic design and safety control of industrial facilities},
  series = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  editor    = {Arion, Cristian and Scupin, Alexandra and Ţigănescu, Alexandru},
  isbn      = {978-973-100-533-1},
  pages     = {3261 -- 3270},
  year      = {2022},
  abstract  = {The seismic performance and safety of major European industrial facilities has a global interest for Europe, its citizens and economy. A potential major disaster at an industrial site could affect several countries, probably far beyond the country where it is located. However, the seismic design and safety assessment of these facilities is practically based on national, often outdated seismic hazard assessment studies, due to many reasons, including the absence of a reliable, commonly developed seismic hazard model for whole Europe. This important gap is no more existing, as the 2020 European Seismic Hazard Model ESHM20 was released in December 2021. In this paper we investigate the expected impact of the adoption of ESHM20 on the seismic demand for industrial facilities, through the comparison of the ESHM20 probabilistic hazard at the sites where industrial facilities are located with the respective national and European regulations. The goal of this preliminary work in the framework of Working Group 13 of the European Association for Earthquake Engineering (EAEE), is to identify potential inadequacies in the design and safety control of existing industrial facilities and to highlight the expected impact of the adoption of the new European Seismic Hazard Model on the design of new industrial facilities and the safety assessment of existing ones.},
  language  = {en}
}
@inproceedings{PuetzBaierBrauneretal.2022,
  author    = {P{\"u}tz, Sebastian and Baier, Ralph and Brauner, Philipp and Brillowski, Florian and Dammers, Hannah and Liehner, Luca and Mertens, Alexander and Rodemann, Niklas and Schneider, Sebastian and Schollemann, Alexander and Steuer-Dankert, Linda and Vervier, Luisa and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Piller, Frank T. and Schuh, G{\"u}nther and Ziefle, Martina and Nitsch, Verena},
  title     = {An interdisciplinary view on humane interfaces for digital shadows in the internet of production},
  series = {2022 15th International Conference on Human System Interaction (HSI)},
  booktitle = {2022 15th International Conference on Human System Interaction (HSI)},
  publisher = {IEEE},
  isbn      = {978-1-6654-6823-7 (Print)},
  issn      = {2158-2246 (Print)},
  doi       = {10.1109/HSI55341.2022.9869467},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {Digital shadows play a central role for the next generation industrial internet, also known as Internet of Production (IoP). However, prior research has not considered systematically how human actors interact with digital shadows, shaping their potential for success. To address this research gap, we assembled an interdisciplinary team of authors from diverse areas of human-centered research to propose and discuss design and research recommendations for the implementation of industrial user interfaces for digital shadows, as they are currently conceptualized for the IoP. Based on the four use cases of decision support systems, knowledge sharing in global production networks, human-robot collaboration, and monitoring employee workload, we derive recommendations for interface design and enhancing workers' capabilities. This analysis is extended by introducing requirements from the higher-level perspectives of governance and organization.},
  language  = {en}
}
@article{FalkenbergBottBongaertsetal.2022,
  author    = {Falkenberg, Fabian and Bott, Michael and Bongaerts, Johannes and Siegert, Petra},
  title     = {Phylogenetic survey of the subtilase family and a data-mining-based search for new subtilisins from Bacillaceae},
  series = {Frontiers in Microbiology},
  volume    = {2022},
  journal   = {Frontiers in Microbiology},
  number    = {13},
  publisher = {Frontiers},
  address   = {Lausanne},
  issn      = {1664-302X},
  doi       = {10.3389/fmicb.2022.1017978},
  pages     = {Artikel 13:1017978},
  year      = {2022},
  abstract  = {The subtilase family (S8), a member of the clan SB of serine proteases are ubiquitous in all kingdoms of life and fulfil different physiological functions. Subtilases are divided in several groups and especially subtilisins are of interest as they are used in various industrial sectors. Therefore, we searched for new subtilisin sequences of the family Bacillaceae using a data mining approach. The obtained 1,400 sequences were phylogenetically classified in the context of the subtilase family. This required an updated comprehensive overview of the different groups within this family. To fill this gap, we conducted a phylogenetic survey of the S8 family with characterised holotypes derived from the MEROPS database. The analysis revealed the presence of eight previously uncharacterised groups and 13 subgroups within the S8 family. The sequences that emerged from the data mining with the set filter parameters were mainly assigned to the subtilisin subgroups of true subtilisins, high-alkaline subtilisins, and phylogenetically intermediate subtilisins and represent an excellent source for new subtilisin candidates.},
  language  = {en}
}
@article{HaegerBongaertsSiegert2022,
  author    = {Haeger, Gerrit and Bongaerts, Johannes and Siegert, Petra},
  title     = {A convenient ninhydrin assay in 96-well format for amino acid-releasing enzymes using an air-stable reagent},
  series = {Analytical Biochemistry},
  journal   = {Analytical Biochemistry},
  number    = {624},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1096-0309},
  doi       = {10.1016/j.ab.2022.114819},
  pages     = {Artikel 114819},
  year      = {2022},
  abstract  = {An improved and convenient ninhydrin assay for aminoacylase activity measurements was developed using the commercial EZ Nin™ reagent. Alternative reagents from literature were also evaluated and compared. The addition of DMSO to the reagent enhanced the solubility of Ruhemann's purple (RP). Furthermore, we found that the use of a basic, aqueous buffer enhances stability of RP. An acidic protocol for the quantification of lysine was developed by addition of glacial acetic acid. The assay allows for parallel processing in a 96-well format with measurements microtiter plates.},
  language  = {en}
}
@article{WeldenSeverinsPoghossianetal.2022,
  author    = {Welden, Melanie and Severins, Robin and Poghossian, Arshak and Wege, Christina and Bongaerts, Johannes and Siegert, Petra and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Detection of acetoin and diacetyl by a tobacco mosaic virus-assisted field-effect biosensor},
  series = {Chemosensors},
  volume    = {10},
  journal   = {Chemosensors},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9040},
  doi       = {10.3390/chemosensors10060218},
  pages     = {Artikel 218},
  year      = {2022},
  abstract  = {Acetoin and diacetyl have a major impact on the flavor of alcoholic beverages such as wine or beer. Therefore, their measurement is important during the fermentation process. Until now, gas chromatographic techniques have typically been applied; however, these require expensive laboratory equipment and trained staff, and do not allow for online monitoring. In this work, a capacitive electrolyte-insulator-semiconductor sensor modified with tobacco mosaic virus (TMV) particles as enzyme nanocarriers for the detection of acetoin and diacetyl is presented. The enzyme acetoin reductase from Alkalihalobacillus clausii DSM 8716ᵀ is immobilized via biotin-streptavidin affinity, binding to the surface of the TMV particles. The TMV-assisted biosensor is electrochemically characterized by means of leakage-current, capacitance-voltage, and constant capacitance measurements. In this paper, the novel biosensor is studied regarding its sensitivity and long-term stability in buffer solution. Moreover, the TMV-assisted capacitive field-effect sensor is applied for the detection of diacetyl for the first time. The measurement of acetoin and diacetyl with the same sensor setup is demonstrated. Finally, the successive detection of acetoin and diacetyl in buffer and in diluted beer is studied by tuning the sensitivity of the biosensor using the pH value of the measurement solution.},
  language  = {en}
}
@inproceedings{WeldenSeverinsPoghossianetal.2022,
  author    = {Welden, Melanie and Severins, Robin and Poghossian, Arshak and Wege, Christina and Siegert, Petra and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Studying the immobilization of acetoin reductase with Tobacco mosaic virus particles on capacitive field-effect sensors},
  series = {2022 IEEE International Symposium on Olfaction and Electronic Nose (ISOEN)},
  booktitle = {2022 IEEE International Symposium on Olfaction and Electronic Nose (ISOEN)},
  publisher = {IEEE},
  isbn      = {978-1-6654-5860-3 (Online)},
  doi       = {10.1109/ISOEN54820.2022.9789657},
  pages     = {4 Seiten},
  year      = {2022},
  abstract  = {A capacitive electrolyte-insulator-semiconductor (EISCAP) biosensor modified with Tobacco mosaic virus (TMV) particles for the detection of acetoin is presented. The enzyme acetoin reductase (AR) was immobilized on the surface of the EISCAP using TMV particles as nanoscaffolds. The study focused on the optimization of the TMV-assisted AR immobilization on the Ta 2 O 5 -gate EISCAP surface. The TMV-assisted acetoin EISCAPs were electrochemically characterized by means of leakage-current, capacitance-voltage, and constant-capacitance measurements. The TMV-modified transducer surface was studied via scanning electron microscopy.},
  language  = {en}
}
@article{OjovanSteinmetz2022,
  author    = {Ojovan, Michael I. and Steinmetz, Hans-J{\"u}rgen},
  title     = {Approaches to Disposal of Nuclear Waste},
  series = {Energies},
  volume    = {15},
  journal   = {Energies},
  number    = {20},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en15207804},
  pages     = {Artikel 7804},
  year      = {2022},
  abstract  = {We present a concise mini overview on the approaches to the disposal of nuclear waste currently used or deployed. The disposal of nuclear waste is the end point of nuclear waste management (NWM) activities and is the emplacement of waste in an appropriate facility without the intention to retrieve it. The IAEA has developed an internationally accepted classification scheme based on the end points of NWM, which is used as guidance. Retention times needed for safe isolation of waste radionuclides are estimated based on the radiotoxicity of nuclear waste. Disposal facilities usually rely on a multi-barrier defence system to isolate the waste from the biosphere, which comprises the natural geological barrier and the engineered barrier system. Disposal facilities could be of a trench type, vaults, tunnels, shafts, boreholes, or mined repositories. A graded approach relates the depth of the disposal facilities' location with the level of hazard. Disposal practices demonstrate the reliability of nuclear waste disposal with minimal expected impacts on the environment and humans.},
  language  = {en}
}
@misc{WiegnerVolkerMainzetal.2022,
  author    = {Wiegner, J. and Volker, H. and Mainz, F. and Backes, A. and L{\"o}ken, M. and H{\"u}ning, Felix},
  title     = {Wiegand-Effect-Powered Wireless IT Sensor Node},
  year      = {2022},
  abstract  = {With the growing interest in small distributed sensors for the "Internet of Things", more attention is being paid to energy harvesting techologies. Reducing or eliminating the need for external power sources or batteries make devices more self-sufficient, more reliable, and reduces maintenance requirements. The Wiegand effect is a proven technology for harvesting small amounts of electrical power from mechanical motion.},
  language  = {en}
}
@misc{Rouenhoff2022,
  type      = {Master Thesis},
  author    = {Rouenhoff, Saskia},
  title     = {Blind - invisible connection : ein Spiel zur kritischen Auseinandersetzung mit den sozialen Medien.},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {321 Seiten},
  year      = {2022},
  abstract  = {Im Computerspiel „blind - invisible connection" taucht der Spieler in eine Fantasiewelt ein, die die sozialen Medien widerspiegelt und von einer Maschine beherrscht wird. Um zu erfahren, was in dieser Welt geschehen ist, muss die Geschichte Schritt f{\"u}r Schritt erspielt und wie ein Puzzle zusammengesetzt werden. Dabei interagieren die Spieler:innen mittels Dialogen mit den Bewohner:innen der Fantasiewelt und l{\"o}sen R{\"a}tsel, die die Geschichte enth{\"u}llen. Durch Analogien zwischen der Fantasiewelt und den sozialen Medien wird die Funktionsweise und der Einfluss der Plattformen auf die Menschen und die Gesellschaft verdeutlicht. So wird eine Reflexion des eigenen Umgangs mit den sozialen Medien angeregt und Gespr{\"a}chsstoff f{\"u}r Diskussionen unter den Spieler:innen und Mitmenschen geliefert.},
  language  = {de}
}
@article{ZhantlessovaSavitskayaKistaubayevaetal.2022,
  author    = {Zhantlessova, Sirina and Savitskaya, Irina and Kistaubayeva, Aida and Ignatova, Ludmila and Talipova, Aizhan and Pogrebnjak, Alexander and Digel, Ilya},
  title     = {Advanced "Green" prebiotic composite of bacterial cellulose/pullulan based on synthetic biology-powered microbial coculture strategy},
  series = {Polymers},
  volume    = {14},
  journal   = {Polymers},
  number    = {15},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4360},
  doi       = {10.3390/polym14153224},
  pages     = {Artikel 3224},
  year      = {2022},
  abstract  = {Bacterial cellulose (BC) is a biopolymer produced by different microorganisms, but in biotechnological practice, Komagataeibacter xylinus is used. The micro- and nanofibrillar structure of BC, which forms many different-sized pores, creates prerequisites for the introduction of other polymers into it, including those synthesized by other microorganisms. The study aims to develop a cocultivation system of BC and prebiotic producers to obtain BC-based composite material with prebiotic activity. In this study, pullulan (PUL) was found to stimulate the growth of the probiotic strain Lactobacillus rhamnosus GG better than the other microbial polysaccharides gellan and xanthan. BC/PUL biocomposite with prebiotic properties was obtained by cocultivation of Komagataeibacter xylinus and Aureobasidium pullulans, BC and PUL producers respectively, on molasses medium. The inclusion of PUL in BC is proved gravimetrically by scanning electron microscopy and by Fourier transformed infrared spectroscopy. Cocultivation demonstrated a composite effect on the aggregation and binding of BC fibers, which led to a significant improvement in mechanical properties. The developed approach for "grafting" of prebiotic activity on BC allows preparation of environmentally friendly composites of better quality.},
  language  = {en}
}
@article{WeldenPoghossianVahidpouretal.2022,
  author    = {Welden, Melanie and Poghossian, Arshak and Vahidpour, Farnoosh and Wendlandt, Tim and Keusgen, Michael and Wege, Christina and Sch{\"o}ning, Michael Josef},
  title     = {Towards multi-analyte detection with field-effect capacitors modified with tobacco mosaic virus bioparticles as enzyme nanocarriers},
  series = {Biosensors},
  volume    = {12},
  journal   = {Biosensors},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-6374},
  doi       = {10.3390/bios12010043},
  pages     = {Artikel 43},
  year      = {2022},
  abstract  = {Utilizing an appropriate enzyme immobilization strategy is crucial for designing enzyme-based biosensors. Plant virus-like particles represent ideal nanoscaffolds for an extremely dense and precise immobilization of enzymes, due to their regular shape, high surface-to-volume ratio and high density of surface binding sites. In the present work, tobacco mosaic virus (TMV) particles were applied for the co-immobilization of penicillinase and urease onto the gate surface of a field-effect electrolyte-insulator-semiconductor capacitor (EISCAP) with a p-Si-SiO₂-Ta₂O₅ layer structure for the sequential detection of penicillin and urea. The TMV-assisted bi-enzyme EISCAP biosensor exhibited a high urea and penicillin sensitivity of 54 and 85 mV/dec, respectively, in the concentration range of 0.1-3 mM. For comparison, the characteristics of single-enzyme EISCAP biosensors modified with TMV particles immobilized with either penicillinase or urease were also investigated. The surface morphology of the TMV-modified Ta₂O₅-gate was analyzed by scanning electron microscopy. Additionally, the bi-enzyme EISCAP was applied to mimic an XOR (Exclusive OR) enzyme logic gate.},
  language  = {en}
}
@book{Laack2022,
  author    = {Laack, Walter van},
  title     = {Greater Than the Entire Universe},
  publisher = {van Laack GmbH},
  address   = {Aachen},
  isbn      = {978-3-936624-52-6},
  pages     = {120 Seiten},
  year      = {2022},
  language  = {en}
}
@book{Laack2022,
  author    = {Laack, Walter van},
  title     = {Aufruf zum Nachdenken: Corona und neue Kriege - Wie kann die Menschheit {\"u}berleben?},
  publisher = {van Laack GmbH},
  address   = {Aachen},
  isbn      = {978-3-936624-56-4},
  pages     = {56 Seiten},
  year      = {2022},
  language  = {de}
}
@book{Laack2022,
  author    = {Laack, Walter van},
  title     = {Schnittstelle Tod: Was lernen wir durch Corona {\"u}ber Leben und Tod?},
  publisher = {van Laack GmbH},
  address   = {Aachen},
  isbn      = {978-3-936624-53-3},
  pages     = {108 Seiten},
  year      = {2022},
  language  = {de}
}
@article{KahmannRauschPluemeretal.2022,
  author    = {Kahmann, Stephanie L. and Rausch, Valentin and Pl{\"u}mer, Jonathan and M{\"u}ller, Lars P. and Pieper, Martin and Wegmann, Kilian},
  title     = {The automized fracture edge detection and generation of three-dimensional fracture probability heat maps},
  series = {Medical Engineering \& Physics},
  volume    = {2022},
  journal   = {Medical Engineering \& Physics},
  number    = {110},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {With proven impact of statistical fracture analysis on fracture classifications, it is desirable to minimize the manual work and to maximize repeatability of this approach. We address this with an algorithm that reduces the manual effort to segmentation, fragment identification and reduction. The fracture edge detection and heat map generation are performed automatically. With the same input, the algorithm always delivers the same output. The tool transforms one intact template consecutively onto each fractured specimen by linear least square optimization, detects the fragment edges in the template and then superimposes them to generate a fracture probability heat map. We hypothesized that the algorithm runs faster than the manual evaluation and with low (< 5 mm) deviation. We tested the hypothesis in 10 fractured proximal humeri and found that it performs with good accuracy (2.5 mm ± 2.4 mm averaged Euclidean distance) and speed (23 times faster). When applied to a distal humerus, a tibia plateau, and a scaphoid fracture, the run times were low (1-2 min), and the detected edges correct by visual judgement. In the geometrically complex acetabulum, at a run time of 78 min some outliers were considered acceptable. An automatically generated fracture probability heat map based on 50 proximal humerus fractures matches the areas of high risk of fracture reported in medical literature. Such automation of the fracture analysis method is advantageous and could be extended to reduce the manual effort even further.},
  language  = {en}
}
@article{SchwagerFleschSchwarzboezletal.2022,
  author    = {Schwager, Christian and Flesch, Robert and Schwarzb{\"o}zl, Peter and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e}},
  title     = {Advanced two phase flow model for transient molten salt receiver system simulation},
  series = {Solar Energy},
  volume    = {232},
  journal   = {Solar Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0038-092X (print)},
  doi       = {10.1016/j.solener.2021.12.065},
  pages     = {362 -- 375},
  year      = {2022},
  abstract  = {In order to realistically predict and optimize the actual performance of a concentrating solar power (CSP) plant sophisticated simulation models and methods are required. This paper presents a detailed dynamic simulation model for a Molten Salt Solar Tower (MST) system, which is capable of simulating transient operation including detailed startup and shutdown procedures including drainage and refill. For appropriate representation of the transient behavior of the receiver as well as replication of local bulk and surface temperatures a discretized receiver model based on a novel homogeneous two-phase (2P) flow modelling approach is implemented in Modelica Dymola®. This allows for reasonable representation of the very different hydraulic and thermal properties of molten salt versus air as well as the transition between both. This dynamic 2P receiver model is embedded in a comprehensive one-dimensional model of a commercial scale MST system and coupled with a transient receiver flux density distribution from raytracing based heliostat field simulation. This enables for detailed process prediction with reasonable computational effort, while providing data such as local salt film and wall temperatures, realistic control behavior as well as net performance of the overall system. Besides a model description, this paper presents some results of a validation as well as the simulation of a complete startup procedure. Finally, a study on numerical simulation performance and grid dependencies is presented and discussed.},
  language  = {en}
}
@inproceedings{GedleSchmitzGielenetal.2022,
  author    = {Gedle, Yibekal and Schmitz, Mark and Gielen, Hans and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Mahdi, Zahra and Caminos, Ricardo Alexander Chico and Dersch, J{\"u}rgen},
  title     = {Analysis of an integrated CSP-PV hybrid power plant},
  series = {SolarPACES 2020},
  booktitle = {SolarPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086236},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In the past, CSP and PV have been seen as competing technologies. Despite massive reductions in the electricity generation costs of CSP plants, PV power generation is - at least during sunshine hours - significantly cheaper. If electricity is required not only during the daytime, but around the clock, CSP with its inherent thermal energy storage gets an advantage in terms of LEC. There are a few examples of projects in which CSP plants and PV plants have been co-located, meaning that they feed into the same grid connection point and ideally optimize their operation strategy to yield an overall benefit. In the past eight years, TSK Flagsol has developed a plant concept, which merges both solar technologies into one highly Integrated CSP-PV-Hybrid (ICPH) power plant. Here, unlike in simply co-located concepts, as analyzed e.g. in [1] - [4], excess PV power that would have to be dumped is used in electric molten salt heaters to increase the storage temperature, improving storage and conversion efficiency. The authors demonstrate the electricity cost sensitivity to subsystem sizing for various market scenarios, and compare the resulting optimized ICPH plants with co-located hybrid plants. Independent of the three feed-in tariffs that have been assumed, the ICPH plant shows an electricity cost advantage of almost 20\% while maintaining a high degree of flexibility in power dispatch as it is characteristic for CSP power plants. As all components of such an innovative concept are well proven, the system is ready for commercial market implementation. A first project is already contracted and in early engineering execution.},
  language  = {en}
}
@inproceedings{MahdiDerschSchmitzetal.2022,
  author    = {Mahdi, Zahra and Dersch, J{\"u}rgen and Schmitz, Pascal and Dieckmann, Simon and Caminos, Ricardo Alexander Chico and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Schwager, Christian and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and B{\"u}scher, Rauno},
  title     = {Technical assessment of Brayton cycle heat pumps for the integration in hybrid PV-CSP power plants},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086269},
  pages     = {11 Seiten},
  year      = {2022},
  abstract  = {The hybridization of Concentrated Solar Power (CSP) and Photovoltaics (PV) systems is a promising approach to reduce costs of solar power plants, while increasing dispatchability and flexibility of power generation. High temperature heat pumps (HT HP) can be utilized to boost the salt temperature in the thermal energy storage (TES) of a Parabolic Trough Collector (PTC) system from 385 °C up to 565 °C. A PV field can supply the power for the HT HP, thus effectively storing the PV power as thermal energy. Besides cost-efficiently storing energy from the PV field, the power block efficiency of the overall system is improved due to the higher steam parameters. This paper presents a technical assessment of Brayton cycle heat pumps to be integrated in hybrid PV-CSP power plants. As a first step, a theoretical analysis was carried out to find the most suitable working fluid. The analysis included the fluids Air, Argon (Ar), Nitrogen (N2) and Carbon dioxide (CO2). N2 has been chosen as the optimal working fluid for the system. After the selection of the ideal working medium, different concepts for the arrangement of a HT HP in a PV-CSP hybrid power plant were developed and simulated in EBSILON®Professional. The concepts were evaluated technically by comparing the number of components required, pressure losses and coefficient of performance (COP).},
  language  = {en}
}
@inproceedings{ZahraPhaniSrujanCaminosetal.2022,
  author    = {Zahra, Mahdi and Phani Srujan, Merige and Caminos, Ricardo Alexander Chico and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and Dersch, J{\"u}rgen},
  title     = {Modeling the thermal behavior of solar salt in electrical resistance heaters for the application in PV-CSP hybrid power plants},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086268},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {Concentrated Solar Power (CSP) systems are able to store energy cost-effectively in their integrated thermal energy storage (TES). By intelligently combining Photovoltaics (PV) systems with CSP, a further cost reduction of solar power plants is expected, as well as an increase in dispatchability and flexibility of power generation. PV-powered Resistance Heaters (RH) can be deployed to raise the temperature of the molten salt hot storage from 385 °C up to 565 °C in a Parabolic Trough Collector (PTC) plant. To avoid freezing and decomposition of molten salt, the temperature distribution in the electrical resistance heater is investigated in the present study. For this purpose, a RH has been modeled and CFD simulations have been performed. The simulation results show that the hottest regions occur on the electric rod surface behind the last baffle. A technical optimization was performed by adjusting three parameters: Shell-baffle clearance, electric rod-baffle clearance and number of baffles. After the technical optimization was carried out, the temperature difference between the maximum temperature and the average outlet temperature of the salt is within the acceptable limits, thus critical salt decomposition has been avoided. Additionally, the CFD simulations results were analyzed and compared with results obtained with a one-dimensional model in Modelica.},
  language  = {en}
}
@inproceedings{CaminosSchmitzAttietal.2022,
  author    = {Caminos, Ricardo Alexander Chico and Schmitz, Pascal and Atti, Vikrama and Mahdi, Zahra and Teixeira Boura, Cristiano Jos{\´e} and Sattler, Johannes Christoph and Herrmann, Ulf and Hilger, Patrick and Dieckmann, Simon},
  title     = {Development of a micro heliostat and optical qualification assessment with a 3D laser scanning method},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086262},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {The Solar-Institut J{\"u}lich (SIJ) and the companies Hilger GmbH and Heliokon GmbH from Germany have developed a small-scale cost-effective heliostat, called "micro heliostat". Micro heliostats can be deployed in small-scale concentrated solar power (CSP) plants to concentrate the sun's radiation for electricity generation, space or domestic water heating or industrial process heat. In contrast to conventional heliostats, the special feature of a micro heliostat is that it consists of dozens of parallel-moving, interconnected, rotatable mirror facets. The mirror facets array is fixed inside a box-shaped module and is protected from weathering and wind forces by a transparent glass cover. The choice of the building materials for the box, tracking mechanism and mirrors is largely dependent on the selected production process and the intended application of the micro heliostat. Special attention was paid to the material of the tracking mechanism as this has a direct influence on the accuracy of the micro heliostat. The choice of materials for the mirror support structure and the tracking mechanism is made in favor of plastic molded parts. A qualification assessment method has been developed by the SIJ in which a 3D laser scanner is used in combination with a coordinate measuring machine (CMM). For the validation of this assessment method, a single mirror facet was scanned and the slope deviation was computed.},
  language  = {en}
}
@inproceedings{NiederwestbergSchneiderTeixeiraBouraetal.2022,
  author    = {Niederwestberg, Stefan and Schneider, Falko and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Introduction to a direct irradiated transparent tube particle receiver},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086735},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {New materials often lead to innovations and advantages in technical applications. This also applies to the particle receiver proposed in this work that deploys high-temperature and scratch resistant transparent ceramics. With this receiver design, particles are heated through direct-contact concentrated solar irradiance while flowing downwards through tubular transparent ceramics from top to bottom. In this paper, the developed particle receiver as well as advantages and disadvantages are described. Investigations on the particle heat-up characteristics from solar irradiance were carried out with DEM simulations which indicate that particle temperatures can reach up to 1200 K. Additionally, a simulation model was set up for investigating the dynamic behavior. A test receiver at laboratory scale has been designed and is currently being built. In upcoming tests, the receiver test rig will be used to validate the simulation results. The design and the measurement equipment is described in this work.},
  language  = {en}
}
@inproceedings{SattlerSchneiderAngeleetal.2022,
  author    = {Sattler, Johannes Christoph and Schneider, Iesse Peer and Angele, Florian and Atti, Vikrama and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Development of heliostat field calibration methods: Theory and experimental test results},
  series = {SolarPACES conference proceedings},
  booktitle = {SolarPACES conference proceedings},
  number    = {Vol. 1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.678},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In this work, three patent pending calibration methods for heliostat fields of central receiver systems (CRS) developed by the Solar-Institut J{\"u}lich (SIJ) of the FH Aachen University of Applied Sciences are presented. The calibration methods can either operate in a combined mode or in stand-alone mode. The first calibration method, method A, foresees that a camera matrix is placed into the receiver plane where it is subjected to concentrated solar irradiance during a measurement process. The second calibration method, method B, uses an unmanned aerial vehicle (UAV) such as a quadrocopter to automatically fly into the reflected solar irradiance cross-section of one or more heliostats (two variants of method B were tested). The third calibration method, method C, foresees a stereo central camera or multiple stereo cameras installed e.g. on the solar tower whereby the orientations of the heliostats are calculated from the location detection of spherical red markers attached to the heliostats. The most accurate method is method A which has a mean accuracy of 0.17 mrad. The mean accuracy of method B variant 1 is 1.36 mrad and of variant 2 is 1.73 mrad. Method C has a mean accuracy of 15.07 mrad. For method B there is great potential regarding improving the measurement accuracy. For method C the collected data was not sufficient for determining whether or not there is potential for improving the accuracy.},
  language  = {en}
}
@inproceedings{SattlerAttiAlexopoulosetal.2022,
  author    = {Sattler, Johannes Christoph and Atti, Vikrama and Alexopoulos, Spiros and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Dutta, Siddharth and Kioutsioukis, Ioannis},
  title     = {DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook},
  series = {SolarPACES conference proceedings},
  booktitle = {SolarPACES conference proceedings},
  number    = {VOL. 1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.731},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut J{\"u}lich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 \% based on the tested days. The result fulfils SIJ's aim to achieve a reliability of around 70 \%, but SIJ aims to still improve the DNI forecast quality.},
  language  = {en}
}