@article{BurgerLindnerRumpfetal.2022,
  author    = {Burger, Ren{\´e} and Lindner, Simon and Rumpf, Jessica and Do, Xuan Tung and Diehl, Bernd W.K. and Rehahn, Matthias and Monakhova, Yulia and Schulze, Margit},
  title     = {Benchtop versus high field NMR: Comparable performance found for the molecular weight determination of lignin},
  series = {Journal of Pharmaceutical and Biomedical Analysis},
  volume    = {212},
  journal   = {Journal of Pharmaceutical and Biomedical Analysis},
  number    = {Article number: 114649},
  publisher = {Elsevier},
  address   = {New York, NY},
  isbn      = {0731-7085},
  doi       = {10.1016/j.jpba.2022.114649},
  year      = {2022},
  abstract  = {Lignin is a promising renewable biopolymer being investigated worldwide as an environmentally benign substitute of fossil-based aromatic compounds, e.g. for the use as an excipient with antioxidant and antimicrobial properties in drug delivery or even as active compound. For its successful implementation into process streams, a quick, easy, and reliable method is needed for its molecular weight determination. Here we present a method using 1H spectra of benchtop as well as conventional NMR systems in combination with multivariate data analysis, to determine lignin's molecular weight (Mw and Mn) and polydispersity index (PDI). A set of 36 organosolv lignin samples (from Miscanthus x giganteus, Paulownia tomentosa and Silphium perfoliatum) was used for the calibration and cross validation, and 17 samples were used as external validation set. Validation errors between 5.6\% and 12.9\% were achieved for all parameters on all NMR devices (43, 60, 500 and 600 MHz). Surprisingly, no significant difference in the performance of the benchtop and high-field devices was found. This facilitates the application of this method for determining lignin's molecular weight in an industrial environment because of the low maintenance expenditure, small footprint, ruggedness, and low cost of permanent magnet benchtop NMR systems.},
  language  = {en}
}
@article{MonakhovaSobolevaFedotovaetal.2022,
  author    = {Monakhova, Yulia and Soboleva, Polina M. and Fedotova, Elena S. and Musina, Kristina T. and Burmistrova, Natalia A.},
  title     = {Quantum chemical calculations of IR spectra of heparin disaccharide subunits},
  series = {Computational and Theoretical Chemistry},
  volume    = {1217},
  journal   = {Computational and Theoretical Chemistry},
  number    = {Article number: 113891},
  publisher = {Elsevier},
  address   = {New York, NY},
  isbn      = {2210-271X},
  doi       = {10.1016/j.comptc.2022.113891},
  year      = {2022},
  abstract  = {Heparin is a natural polysaccharide, which plays essential role in many biological processes. Alterations in building blocks can modify biological roles of commercial heparin products, due to significant changes in the conformation of the polymer chain. The variability structure of heparin leads to difficulty in quality control using different analytical methods, including infrared (IR) spectroscopy. In this paper molecular modelling of heparin disaccharide subunits was performed using quantum chemistry. The structural and spectral parameters of these disaccharides have been calculated using RHF/6-311G. In addition, over-sulphated chondroitin sulphate disaccharide was studied as one of the most widespread contaminants of heparin. Calculated IR spectra were analyzed with respect to specific structure parameters. IR spectroscopic fingerprint was found to be sensitive to substitution pattern of disaccharide subunits. Vibrational assignments of calculated spectra were correlated with experimental IR spectral bands of native heparin. Chemometrics was used to perform multivariate analysis of simulated spectral data.},
  language  = {en}
}
@misc{Vogt2022,
  type      = {Master Thesis},
  author    = {Vogt, Lena},
  title     = {Arch{\"a}ologischer Restaurator : Ausstellungskonzept R{\"o}misch-Germanisches Museum K{\"o}ln},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {23 Seiten},
  year      = {2022},
  abstract  = {Alte, geschichtsrelevante und thematisch angeordnete Objekte, welche man in den Vitrinen der Museen betrachten kann, das kennt sicher jeder. Doch wie kommen diese Artefakte eigentlich in die Vitrinen? Welche Menschen sind daf{\"u}r verantwortlich, dass wir diese Kulturg{\"u}ter bestaunen k{\"o}nnen? In diesem tempor{\"a}ren Ausstellungskonzept f{\"u}r das R{\"o}misch-Germanische Museum K{\"o}ln geht es darum, die sonst verborgene Arbeit der Restauratoren des Museums f{\"u}r die Besucher:innen sichtbar zu machen, ihnen genauere Einblicke in die Arbeit mit ihren Anforderungen zu geben und Restaurierungsprozesse auf zu zeigen. Diese Arbeit demonstriert, wie es abseits der {\"O}ffentlichkeit aussieht und wer daf{\"u}r verantwortlich ist, dass wir einen Einblick in die vergangenen Zeit erhalten k{\"o}nnen. Das Projekt zeigt eine m{\"o}gliche Bespielung des Museums, wie das Berufsbild der Restauratoren in die Dauerausstellung integriert werden k{\"o}nnte.},
  language  = {de}
}
@masterthesis{Laubkermeier2022,
  type      = {Bachelor Thesis},
  author    = {Laubkermeier, Kim},
  title     = {trust me},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {94 Seiten},
  year      = {2022},
  abstract  = {"trust me" ist eine schwarz-weiß Fotoserie, pr{\"a}sentiert als Diashow mit unterlegtem Soundtrack. Es geht um das Vertrauen zwischen Model, Fotografin und Betrachter:innen. Die Darsteller sind ausschließlich homosexuelle M{\"a}nner und begeben sich in intime Situationen und Posen. Die Fotos sind {\"u}berwiegend Aktaufnahmen und nehmen eine pornografische Richtung an. Die Fragestellung zu Beginn war, wie weit vertrauen die unerfahrenen Models der Fotografin und was sind diese bereit, von sich zu zeigen. Die offene Kommunikation {\"u}ber die Richtung des Projekts war die essenzielle Basis f{\"u}r die Fotoshootings. W{\"a}hrend des Fotografierens lag der Fokus auf m{\"o}glichst verschiedenen Blickwinkeln, Kulissen, Ausleuchtungen und Motiven. Zus{\"a}tzlich war der sensible Umgang mit den M{\"a}nnern eine Vertrauensprobe."trust me" l{\"a}sst auf diversen Ebenen tief blicken und zeigt, wie loslassen aussieht.},
  language  = {de}
}
@masterthesis{Theis2022,
  type      = {Bachelor Thesis},
  author    = {Theis, Alina Naomi},
  title     = {Nur ein Freitag : Ein Kurzfilm {\"u}ber Verlust und Freundschaft im Schatten des Zweiten Weltkrieges.},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {103 Seiten},
  year      = {2022},
  abstract  = {Der Film zeigt die wahre Geschichte des 15-j{\"a}hrigen Hans Jokisch, welche auf den Erz{\"a}hlungen seiner j{\"u}ngeren Schwester, der Zeitzeugin Maria Theis (geb. Jokisch), beruhen. Der Fokus liegt auf der Sichtweise von Kindern und Jugendlichen, einer Generation, die mit dem und im Zweiten Weltkrieg aufgewachsen ist und die gleichzeitig die letzte Generation ist, die uns das Erlebte noch aus erster Hand berichten kann. Hans gelangt mit seiner Familie nach einer harten Flucht vor der Frontlinie zur{\"u}ck in seine Heimat in Schlesien. Doch ihr geliebtes Heim ist besetzt von Familie Sch{\"o}ppe. Sie haben keine Wahl, die beiden Familien m{\"u}ssen sich das Haus von nun an teilen. Im Laufe der Zeit wird das Jokisch Haus auch f{\"u}r Familie Sch{\"o}ppe ein Zuhause und Hans freundet sich mit dem Jungen Bruno Sch{\"o}ppe an. Als Deutschland 1945 kapituliert und Schlesien nun zu Polen geh{\"o}rt, m{\"u}ssen pl{\"o}tzlich beide Familien endg{\"u}ltig das Haus und all ihren Besitz zur{\"u}cklassen. Hans und Bruno beschließen, die Zwangsenteignung nicht hinzunehmen, doch ihr naiver Plan wird ihnen fast zum Verh{\"a}ngnis.},
  language  = {de}
}
@masterthesis{Nelles2022,
  type      = {Bachelor Thesis},
  author    = {Nelles, Charlene},
  title     = {Brain Hack},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {77 Seiten},
  year      = {2022},
  abstract  = {Protagonistin des Films ist Cassandra Becker, eine 25-j{\"a}hrige Informatikstudentin und Mitglied der Hackerorganisation PFABW (Progress For a Better World). Sie hat es sich zum Ziel gesetzt, die Welt zu einem besseren Ort zu machen. Sie legt sich allerdings mit den falschen Leuten an und wird f{\"u}r die Verbreitung eines zerst{\"o}rerischen Computervirus verantwortlich gemacht, der gesundheitliche Folgen f{\"u}r den Menschen mit sich bringt. Sie und ihr bester Freund Jake Fischer haben bei einem PFABW-Mitglied Zuflucht gefunden. Dort versuchen sie gemeinsam herauszufinden, was es mit dem mysteri{\"o}sen Virus auf sich hat.},
  language  = {de}
}
@article{HaegerBongaertsSiegert2022,
  author    = {Haeger, Gerrit and Bongaerts, Johannes and Siegert, Petra},
  title     = {A convenient ninhydrin assay in 96-well format for amino acid-releasing enzymes using an air-stable reagent},
  series = {Analytical Biochemistry},
  journal   = {Analytical Biochemistry},
  number    = {624},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1096-0309},
  doi       = {10.1016/j.ab.2022.114819},
  pages     = {Artikel 114819},
  year      = {2022},
  abstract  = {An improved and convenient ninhydrin assay for aminoacylase activity measurements was developed using the commercial EZ Nin™ reagent. Alternative reagents from literature were also evaluated and compared. The addition of DMSO to the reagent enhanced the solubility of Ruhemann's purple (RP). Furthermore, we found that the use of a basic, aqueous buffer enhances stability of RP. An acidic protocol for the quantification of lysine was developed by addition of glacial acetic acid. The assay allows for parallel processing in a 96-well format with measurements microtiter plates.},
  language  = {en}
}
@incollection{Finkenberger2022,
  author    = {Finkenberger, Isabel Maria},
  title     = {R{\"a}umliche Transformation als Planungsaufgabe},
  series = {Zur{\"u}ck in die Zukunft. Denkmalpflege und Strukturwandel im Rheinischen Revier},
  booktitle = {Zur{\"u}ck in die Zukunft. Denkmalpflege und Strukturwandel im Rheinischen Revier},
  editor    = {Pufke, Andrea},
  publisher = {LVR-Amt f{\"u}r Denkmalpflege im Rheinland},
  address   = {Pulheim},
  pages     = {70 -- 77},
  year      = {2022},
  language  = {de}
}
@inproceedings{LangohrBungCrookston2022,
  author    = {Langohr, Philipp and Bung, Daniel Bernhard and Crookston, Brian M.},
  title     = {Hybrid investigation of labyrinth weirs: Discharge capacity and energy dissipation},
  series = {Proceedings of the 39th IAHR World Congress},
  booktitle = {Proceedings of the 39th IAHR World Congress},
  editor    = {Ortega-S{\´a}nchez, Miguel},
  publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)},
  address   = {Madrid},
  isbn      = {978-90-832612-1-8},
  issn      = {2521-7119 (print)},
  doi       = {10.3850/IAHR-39WC252171192022738},
  pages     = {2313 -- 2318},
  year      = {2022},
  abstract  = {The replacement of existing spillway crests or gates with labyrinth weirs is a proven techno-economical means to increase the discharge capacity when rehabilitating existing structures. However, additional information is needed regarding energy dissipation of such weirs, since due to the folded weir crest, a three-dimensional flow field is generated, yielding more complex overflow and energy dissipation processes. In this study, CFD simulations of labyrinth weirs were conducted 1) to analyze the discharge coefficients for different discharges to compare the Cd values to literature data and 2) to analyze and improve energy dissipation downstream of the structure. All tests were performed for a structure at laboratory scale with a height of approx. P = 30.5 cm, a ratio of the total crest length to the total width of 4.7, a sidewall angle of 10° and a quarter-round weir crest shape. Tested headwater ratios were 0.089 ≤ HT/P ≤ 0.817. For numerical simulations, FLOW-3D Hydro was employed, solving the RANS equations with use of finite-volume method and RNG k-ε turbulence closure. In terms of discharge capacity, results were compared to data from physical model tests performed at the Utah Water Research Laboratory (Utah State University), emphasizing higher discharge coefficients from CFD than from the physical model. For upstream heads, some discrepancy in the range of ± 1 cm between literature, CFD and physical model tests was identified with a discussion regarding differences included in the manuscript. For downstream energy dissipation, variable tailwater depths were considered to analyze the formation and sweep-out of a hydraulic jump. It was found that even for high discharges, relatively low downstream Froude numbers were obtained due to high energy dissipation involved by the three-dimensional flow between the sidewalls. The effects of some additional energy dissipation devices, e.g. baffle blocks or end sills, were also analyzed. End sills were found to be non-effective. However, baffle blocks with different locations may improve energy dissipation downstream of labyrinth weirs.},
  language  = {en}
}
@inproceedings{CrookstonBung2022,
  author    = {Crookston, Brian M. and Bung, Daniel Bernhard},
  title     = {Application of RGB-D cameras in hydraulic laboratory studies},
  series = {Proceedings of the 39th IAHR World Congress},
  booktitle = {Proceedings of the 39th IAHR World Congress},
  editor    = {Ortega-S{\´a}nchez, Miguel},
  publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)},
  address   = {Madrid},
  isbn      = {978-90-832612-1-8},
  issn      = {2521-7119 (print)},
  doi       = {10.3850/IAHR-39WC252171192022964},
  pages     = {5127 -- 5133},
  year      = {2022},
  abstract  = {Non-intrusive measuring techniques have attained a lot of interest in relation to both hydraulic modeling and prototype applications. Complimenting acoustic techniques, significant progress has been made for the development of new optical methods. Computer vision techniques can help to extract new information, e. g. high-resolution velocity and depth data, from videos captured with relatively inexpensive, consumer-grade cameras. Depth cameras are sensors providing information on the distance between the camera and observed features. Currently, sensors with different working principles are available. Stereoscopic systems reference physical image features (passive system) from two perspectives; in order to enhance the number of features and improve the results, a sensor may also estimate the disparity from a detected light to its original projection (active stereo system). In the current study, the RGB-D camera Intel RealSense D435, working on such stereo vision principle, is used in different, typical hydraulic modeling applications. All tests have been conducted at the Utah Water Research Laboratory. This paper will demonstrate the performance and limitations of the RGB-D sensor, installed as a single camera and as camera arrays, applied to 1) detect the free surface for highly turbulent, aerated hydraulic jumps, for free-falling jets and for an energy dissipation basin downstream of a labyrinth weir and 2) to monitor local scours upstream and downstream of a Piano Key Weir. It is intended to share the authors' experiences with respect to camera settings, calibration, lightning conditions and other requirements in order to promote this useful, easily accessible device. Results will be compared to data from classical instrumentation and the literature. It will be shown that even in difficult application, e. g. the detection of a highly turbulent, fluctuating free-surface, the RGB-D sensor may yield similar accuracy as classical, intrusive probes.},
  language  = {en}
}
@inproceedings{TranTrinhDaoetal.2022,
  author    = {Tran, Ngoc Trinh and Trinh, Tu Luc and Dao, Ngoc Tien and Giap, Van Tan and Truong, Manh Khuyen and Dinh, Thuy Ha and Staat, Manfred},
  title     = {Limit and shakedown analysis of structures under random strength},
  series = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  booktitle = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  publisher = {Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)},
  address   = {Hanoi},
  isbn      = {978-604-357-084-7},
  pages     = {510 -- 518},
  year      = {2022},
  abstract  = {Direct methods comprising limit and shakedown analysis is a branch of computational mechanics. It plays a significant role in mechanical and civil engineering design. The concept of direct method aims to determinate the ultimate load bearing capacity of structures beyond the elastic range. For practical problems, the direct methods lead to nonlinear convex optimization problems with a large number of variables and onstraints. If strength and loading are random quantities, the problem of shakedown analysis is considered as stochastic programming. This paper presents a method so called chance constrained programming, an effective method of stochastic programming, to solve shakedown analysis problem under random condition of strength. In this our investigation, the loading is deterministic, the strength is distributed as normal or lognormal variables.},
  language  = {en}
}
@misc{KeimerGirbigMayntzetal.2022,
  author    = {Keimer, Jona and Girbig, Leo and Mayntz, Joscha and Tegtmeyer, Philipp and Wendland, Frederik and Dahman, Peter and Fisher, Alex and Dorrington, Graham},
  title     = {Flight mission optimization for eco-efficiency in consideration of electric regeneration and atmospheric conditions},
  series = {AIAA AVIATION 2022 Forum},
  journal   = {AIAA AVIATION 2022 Forum},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2022-4118},
  year      = {2022},
  abstract  = {The development and operation of hybrid or purely electrically powered aircraft in regional air mobility is a significant challenge for the entire aviation sector. This technology is expected to lead to substantial advances in flight performance, energy efficiency, reliability, safety, noise reduction, and exhaust emissions. Nevertheless, any consumed energy results in heat or carbon dioxide emissions and limited electric energy storage capabilities suppress commercial use. Therefore, the significant challenges to achieving eco-efficient aviation are increased aircraft efficiency, the development of new energy storage technologies, and the optimization of flight operations. Two major approaches for higher eco-efficiency are identified: The first one, is to take horizontal and vertical atmospheric motion phenomena into account. Where, in particular, atmospheric waves hold exciting potential. The second one is the use of the regeneration ability of electric aircraft. The fusion of both strategies is expected to improve efficiency. The objective is to reduce energy consumption during flight while not neglecting commercial usability and convenient flight characteristics. Therefore, an optimized control problem based on a general aviation class aircraft has to be developed and validated by flight experiments. The formulated approach enables a development of detailed knowledge of the potential and limitations of optimizing flight missions, considering the capability of regeneration and atmospheric influences to increase efficiency and range.},
  language  = {en}
}
@article{AkimbekovDigelTastambeketal.2022,
  author    = {Akimbekov, Nuraly S. and Digel, Ilya and Tastambek, Kuanysh T. and Marat, Adel K. and Turaliyeva, Moldir A. and Kaiyrmanova, Gulzhan K.},
  title     = {Biotechnology of Microorganisms from Coal Environments: From Environmental Remediation to Energy Production},
  series = {Biology},
  volume    = {11},
  journal   = {Biology},
  number    = {9},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-7737},
  doi       = {10.3390/biology11091306},
  pages     = {47 Seiten},
  year      = {2022},
  abstract  = {It was generally believed that coal sources are not favorable as live-in habitats for microorganisms due to their recalcitrant chemical nature and negligible decomposition. However, accumulating evidence has revealed the presence of diverse microbial groups in coal environments and their significant metabolic role in coal biogeochemical dynamics and ecosystem functioning. The high oxygen content, organic fractions, and lignin-like structures of lower-rank coals may provide effective means for microbial attack, still representing a greatly unexplored frontier in microbiology. Coal degradation/conversion technology by native bacterial and fungal species has great potential in agricultural development, chemical industry production, and environmental rehabilitation. Furthermore, native microalgal species can offer a sustainable energy source and an excellent bioremediation strategy applicable to coal spill/seam waters. Additionally, the measures of the fate of the microbial community would serve as an indicator of restoration progress on post-coal-mining sites. This review puts forward a comprehensive vision of coal biodegradation and bioprocessing by microorganisms native to coal environments for determining their biotechnological potential and possible applications.},
  language  = {en}
}
@misc{KrafftKukaUlberetal.2022,
  author    = {Krafft, Simone and Kuka, Katrin and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Utilization of Lolium perenne varieties as a renewable substrate for single-cell proteins, lactate, and composite materials},
  series = {Chemie Ingenieur Technik},
  volume    = {94},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.202255306},
  pages     = {1303 -- 1304},
  year      = {2022},
  abstract  = {Lolium perenne (perennial ryegrass) is aproductive and high-quality forage grass indigenous to Southern Europe, temperate Asia, and North Africa. Nowadays it is widespread and the dominant grass species on green areas in temperate climates. This abundant source of biomass is suitable for the development of bioeconomic processes because of its high cellulose and water-soluble carbohydrate content. In this work, novel breeds of the perennial ryegrass are being examined with regards to their quality parameters and biotechnological utilization options within the context of bioeconomy. Three processing operations are presented. In the first process, the perennial ryegrass is pretreated by pressing or hydrothermal extraction to derive glucosevia subsequent enzymatic hydrolysis of cellulose. A yield of up to 82 \% glucose was achieved when using the hydrothermal ex-traction as pretreatment. In a second process, the ryegrass is used to produce lactic acid in high concentrations. The influence of the growth conditions and the cutting time on the carboxylic acid yield is investigated. A yield of lactic acid of above 150 g kg⁻¹ dry matter was achieved. The third process is to use Lolium perenne as a substrate in the fermentation of K. marxianus for the microbial production of single-cell proteins. The perennial ryegrass is screw-pressed and the press juice is used as medium. When supplementing the press juice with yeast media components, a biomass concentration of up to 16 g L⁻¹ could be achieved.},
  language  = {en}
}
@misc{TopcuMadabhushiStaat2022,
  author    = {Topcu, Murat and Madabhushi, Gopal Santana Phani and Staat, Manfred},
  title     = {Datasets from FEM Simulations done with COMSOL Multiphysics and Code_Aster},
  doi       = {10.6084/m9.figshare.19333295.v2},
  year      = {2022},
  abstract  = {Datasets from FEM Simulations done with COMSOL Multiphysics and Code_Aster for an elastic stress transfer between matrix and fibres having a variable radius.},
  language  = {en}
}
@article{ThiebesKleinZingsheimetal.2022,
  author    = {Thiebes, Anja Lena and Klein, Sarah and Zingsheim, Jonas and M{\"o}ller, Georg H. and G{\"u}rzing, Stefanie and Reddemann, Manuel A. and Behbahani, Mehdi and Cornelissen, Christian G.},
  title     = {Effervescent atomizer as novel cell spray technology to decrease the gas-to-liquid ratio},
  series = {pharmaceutics},
  volume    = {14},
  journal   = {pharmaceutics},
  number    = {11},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/pharmaceutics14112421},
  pages     = {Artikel 2421},
  year      = {2022},
  abstract  = {Cell spraying has become a feasible application method for cell therapy and tissue engineering approaches. Different devices have been used with varying success. Often, twin-fluid atomizers are used, which require a high gas velocity for optimal aerosolization characteristics. To decrease the amount and velocity of required air, a custom-made atomizer was designed based on the effervescent principle. Different designs were evaluated regarding spray characteristics and their influence on human adipose-derived mesenchymal stromal cells. The arithmetic mean diameters of the droplets were 15.4-33.5 µm with decreasing diameters for increasing gas-to-liquid ratios. The survival rate was >90\% of the control for the lowest gas-to-liquid ratio. For higher ratios, cell survival decreased to approximately 50\%. Further experiments were performed with the design, which had shown the highest survival rates. After seven days, no significant differences in metabolic activity were observed. The apoptosis rates were not influenced by aerosolization, while high gas-to-liquid ratios caused increased necrosis levels. Tri-lineage differentiation potential into adipocytes, chondrocytes, and osteoblasts was not negatively influenced by aerosolization. Thus, the effervescent aerosolization principle was proven suitable for cell applications requiring reduced amounts of supplied air. This is the first time an effervescent atomizer was used for cell processing.},
  language  = {en}
}
@inproceedings{VeettilRakshitSchopenetal.2022,
  author    = {Veettil, Yadu Krishna Morassery and Rakshit, Shantam and Schopen, Oliver and Kemper, Hans and Esch, Thomas and Shabani, Bahman},
  title     = {Automated Control System Strategies to Ensure Safety of PEM Fuel Cells Using Kalman Filters},
  series = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  booktitle = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  editor    = {Bin Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Singh, Amrik Singh Phuman and Munir, Fudhail Abdul and Ibrahim, Asriana},
  publisher = {Springer Nature},
  address   = {Singapore},
  isbn      = {978-981-19-3178-9},
  issn      = {2195-4356},
  doi       = {10.1007/978-981-19-3179-6_55},
  pages     = {296 -- 299},
  year      = {2022},
  abstract  = {Having well-defined control strategies for fuel cells, that can efficiently detect errors and take corrective action is critically important for safety in all applications, and especially so in aviation. The algorithms not only ensure operator safety by monitoring the fuel cell and connected components, but also contribute to extending the health of the fuel cell, its durability and safe operation over its lifetime. While sensors are used to provide peripheral data surrounding the fuel cell, the internal states of the fuel cell cannot be directly measured. To overcome this restriction, Kalman Filter has been implemented as an internal state observer. Other safety conditions are evaluated using real-time data from every connected sensor and corrective actions automatically take place to ensure safety. The algorithms discussed in this paper have been validated thorough Model-in-the-Loop (MiL) tests as well as practical validation at a dedicated test bench.},
  language  = {en}
}
@book{Laack2022,
  author    = {Laack, Walter van},
  title     = {Greater Than the Entire Universe},
  publisher = {van Laack GmbH},
  address   = {Aachen},
  isbn      = {978-3-936624-52-6},
  pages     = {120 Seiten},
  year      = {2022},
  language  = {en}
}
@inproceedings{TamaldinMansorMatYaminetal.2022,
  author    = {Tamaldin, Noreffendy and Mansor, Muhd Rizuan and Mat Yamin, Ahmad Kamal and Bin Abdollah, Mohd Fazli and Esch, Thomas and Tonoli, Andrea and Reisinger, Karl Heinz and Sprenger, Hanna and Razuli, Hisham},
  title     = {Development of UTeM United Future Fuel Design Training Center Under Erasmus+ United Program},
  series = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  booktitle = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  editor    = {Bin Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Singh, Amrik Singh Phuman and Munir, Fudhail Abdul and Ibrahim, Asriana},
  publisher = {Springer Nature},
  address   = {Singapore},
  isbn      = {978-981-19-3178-9},
  issn      = {2195-4356},
  doi       = {10.1007/978-981-19-3179-6_50},
  pages     = {274 -- 278},
  year      = {2022},
  abstract  = {The industrial revolution IR4.0 era have driven many states of the art technologies to be introduced especially in the automotive industry. The rapid development of automotive industries in Europe have created wide industry gap between European Union (EU) and developing countries such as in South-East Asia (SEA). Indulging this situation, FH Joanneum, Austria together with European partners from FH Aachen, Germany and Politecnico Di Torino, Italy is taking initiative to close the gap utilizing the Erasmus+ United grant from EU. A consortium was founded to engage with automotive technology transfer using the European ramework to Malaysian, Indonesian and Thailand Higher Education Institutions (HEI) as well as automotive industries. This could be achieved by establishing Engineering Knowledge Transfer Unit (EKTU) in respective SEA institutions guided by the industry partners in their respective countries. This EKTU could offer updated, innovative, and high-quality training courses to increase graduate's employability in higher education institutions and strengthen relations between HEI and the wider economic and social environment by addressing Universityindustry cooperation which is the regional priority for Asia. It is expected that, the Capacity Building Initiative would improve the quality of higher education and enhancing its relevance for the labor market and society in the SEA partners. The outcome of this project would greatly benefit the partners in strong and complementary partnership targeting the automotive industry and enhanced larger scale international cooperation between the European and SEA partners. It would also prepare the SEA HEI in sustainable partnership with Automotive industry in the region as a mean of income generation in the future.},
  language  = {en}
}
@inproceedings{StaatTran2022,
  author    = {Staat, Manfred and Tran, Ngoc Trinh},
  title     = {Strain based brittle failure criteria for rocks},
  series = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  booktitle = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  publisher = {Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)},
  address   = {Hanoi},
  isbn      = {978-604-357-084-7},
  pages     = {500 -- 509},
  year      = {2022},
  abstract  = {When confining pressure is low or absent, extensional fractures are typical, with fractures occurring on unloaded planes in rock. These "paradox" fractures can be explained by a phenomenological extension strain failure criterion. In the past, a simple empirical criterion for fracture initiation in brittle rock has been developed. But this criterion makes unrealistic strength predictions in biaxial compression and tension. A new extension strain criterion overcomes this limitation by adding a weighted principal shear component. The weight is chosen, such that the enriched extension strain criterion represents the same failure surface as the Mohr-Coulomb (MC) criterion. Thus, the MC criterion has been derived as an extension strain criterion predicting failure modes, which are unexpected in the understanding of the failure of cohesive-frictional materials. In progressive damage of rock, the most likely fracture direction is orthogonal to the maximum extension strain. The enriched extension strain criterion is proposed as a threshold surface for crack initiation CI and crack damage CD and as a failure surface at peak P. Examples show that the enriched extension strain criterion predicts much lower volumes of damaged rock mass compared to the simple extension strain criterion.},
  language  = {en}
}
@article{Timme2022,
  author    = {Timme, Michael},
  title     = {Beweislast beim gutgl{\"a}ubigen Erwerb eines Kraftfahrzeugs ohne Erhalt der Zulassungsbescheinigung Teil II — Zugleich eine Besprechung von BGH, Urt. v. 23.9.2022 - V ZR 148/21, MDR 2022, 1542},
  series = {Monatsschrift f{\"u}r Deutsches Recht},
  volume    = {77},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht},
  number    = {1},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  doi       = {doi.org/10.9785/mdtr-2023-770102},
  pages     = {r5 -- r7},
  year      = {2022},
  abstract  = {Im Handel mit Kraftfahrzeugen geh{\"o}ren Aspekte des gutgl{\"a}ubigen Erwerbs zu den beinahe allt{\"a}glichen Standardproblemen. Der BGH f{\"u}gt in seiner Entscheidung v. 23.9.2022-VZR148/21, MDR 2022, 1541 diesem im Detail breit gef{\"a}cherten Themenfeld einen weiteren Mosaikstein hinzu: Der Erwerber erhielt das verkaufte Kfz ohne {\"U}bergabe einer Zulassungsbescheinigung Teil II, behauptet aber, diese Bescheinigung sei dem vom ihm eingeschalteten Vermittler bei Erwerb (als F{\"a}lschung) vorgelegt worden. Tats{\"a}chlich befand sich das Original durchg{\"a}ngig beim wahren Eigent{\"u}mer, der nunmehr Herausgabe des Fahrzeugs verlangt. Der BGH sch{\"u}tzt in dieser Gestaltung im Ergebnis den Erwerber. Die Entscheidung ist in mehrfacher Hinsicht bemerkenswert.},
  language  = {de}
}
@article{KahmannRauschPluemeretal.2022,
  author    = {Kahmann, Stephanie L. and Rausch, Valentin and Pl{\"u}mer, Jonathan and M{\"u}ller, Lars P. and Pieper, Martin and Wegmann, Kilian},
  title     = {The automized fracture edge detection and generation of three-dimensional fracture probability heat maps},
  series = {Medical Engineering \& Physics},
  volume    = {2022},
  journal   = {Medical Engineering \& Physics},
  number    = {110},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {With proven impact of statistical fracture analysis on fracture classifications, it is desirable to minimize the manual work and to maximize repeatability of this approach. We address this with an algorithm that reduces the manual effort to segmentation, fragment identification and reduction. The fracture edge detection and heat map generation are performed automatically. With the same input, the algorithm always delivers the same output. The tool transforms one intact template consecutively onto each fractured specimen by linear least square optimization, detects the fragment edges in the template and then superimposes them to generate a fracture probability heat map. We hypothesized that the algorithm runs faster than the manual evaluation and with low (< 5 mm) deviation. We tested the hypothesis in 10 fractured proximal humeri and found that it performs with good accuracy (2.5 mm ± 2.4 mm averaged Euclidean distance) and speed (23 times faster). When applied to a distal humerus, a tibia plateau, and a scaphoid fracture, the run times were low (1-2 min), and the detected edges correct by visual judgement. In the geometrically complex acetabulum, at a run time of 78 min some outliers were considered acceptable. An automatically generated fracture probability heat map based on 50 proximal humerus fractures matches the areas of high risk of fracture reported in medical literature. Such automation of the fracture analysis method is advantageous and could be extended to reduce the manual effort even further.},
  language  = {en}
}
@masterthesis{Lebrecht2022,
  type      = {Bachelor Thesis},
  author    = {Lebrecht, Rike-Charlotte},
  title     = {Inga : ein modulares hydroponisches System f{\"u}r Endverbraucher},
  publisher = {FH Aachen},
  address   = {Aachen},
  year      = {2022},
  abstract  = {In dieser Arbeit wurde sich mit der Frage auseinandergesetzt, wie sich der Nahrungsmittelanbau im urbanen Raum entwickeln k{\"o}nnte. Eine spannende Alternative zu traditionellen Anbaumethoden ist die Hydroponik, der Anbau von Pflanzen ohne Erde. Basierend auf dieser Technologie wurde in diesem Projekt ein Indoor-Garden-System gestaltet, welches den Nahrungsmittelanbau zur{\"u}ck zur Verbraucher:In bringt und zu einem bewussteren Umgang mit Lebensmitteln anregen soll. Denn mit „INGA" kann frisches, pestizidfreies Blattgem{\"u}se ganz einfach zu Hause selbst angebaut werden. Das hydroponische System schafft mithilfe einer N{\"a}hrstoffl{\"o}sung und k{\"u}nstlichem Licht optimale Wachstumsbedingungen f{\"u}r die Pflanzen - ganz unabh{\"a}ngig von {\"o}rtlichen Gegebenheiten. Mithilfe seiner Modularit{\"a}t k{\"o}nnen Nutzer:Innen „INGA" nach Belieben konfigurieren. Damit wird es einer breiten Zielgruppe mit unterschiedlichen Bed{\"u}rfnissen gerecht und erm{\"o}glicht pestizidfreie Nahrung - auch in den St{\"a}dten.},
  language  = {de}
}
@masterthesis{Menrath2022,
  type      = {Bachelor Thesis},
  author    = {Menrath, Maike},
  title     = {Konzept zur Lebensmittelnahversorgung außerhalb urbaner Strukturen : Verkaufspunkt f{\"u}r l{\"a}ndliche Gebiete},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {131 Seiten},
  year      = {2022},
  abstract  = {L{\"a}ndliche Regionen sind h{\"a}ufig infrastrukturell schlechter versorgt als urbane R{\"a}ume, was sich insbesondere auf die Versorgung mit G{\"u}tern des t{\"a}glichen Bedarfs niederschl{\"a}gt. Menschen außerhalb st{\"a}dtischer Ballungsgebiete m{\"u}ssen deswegen oft lange Anfahrten zu Superm{\"a}rkten in Kauf nehmen. Hierbei sind sie vor allem auf das Auto angewiesen. In dieser Arbeit ist „ILSE" entstanden. Eine Verkaufsbox, die Menschen in l{\"a}ndlichen Raumstrukturen besser mit Waren versorgt, indem sie dort aufgestellt wird, wo sie auch wirklich ben{\"o}tigt wird. Dank digitaler Verkaufstechnologien ist „ILSE" durchgehend ge{\"o}ffnet, auch, wenn andere Superm{\"a}rkte l{\"a}ngst geschlossen sind. Mit einer App wird der Kundschaft der Zugang zum Verkaufsraum und das Bezahlen erm{\"o}glicht.},
  language  = {de}
}
@masterthesis{Frank2022,
  type      = {Bachelor Thesis},
  author    = {Frank, Jemima Leonie},
  title     = {Falling in love with the female gaze},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {81 Seiten},
  year      = {2022},
  abstract  = {Der „Male Gaze" bezeichnet das typische Erleben der Umwelt aus m{\"a}nnlicher Perspektive und pr{\"a}gt in den sogenannten Mainstream-Medien die Gestaltung von Film, Fernsehen und Werbung. Dadurch werden von dargestellten Personen h{\"a}ufig die k{\"o}rperlichen Aspekte hervorgehoben. Im Gegensatz dazu gilt das weibliche Pendant, der „Female Gaze", als besonders emotionsbetont. Weil Medien einen enormen Einfluss auf gesellschaftliches und individuelles Denken haben, stellt die Dominanz des „Male Gaze" eine Unausgeglichenheit dar, die sich in verschiedenen Bereichen des gesellschaftlichen Lebens widerspiegelt. Deswegen m{\"o}chte dieses Projekt die Medien um die weibliche Sichtweise erweitern und damit die dort transportierten Bilder diverser und ausgewogener machen. Die Fotografie fokussiert sich dabei auf die Gef{\"u}hlswelt der Protagonistin, womit die Betrachter:Innen schrittweise in ihre Position hineinversetzt werden sollen. Mit Augen des Mitgef{\"u}hls und eigenem Sch{\"o}nheitsbegriff l{\"a}sst „Falling in love with the female gaze" endlich auch die Frau zu Wort kommen.},
  language  = {de}
}
@masterthesis{Horvath2022,
  type      = {Bachelor Thesis},
  author    = {Horvath, Nicolas},
  title     = {Neues Corporate Design f{\"u}r das Rautenstrauch Joest Museum K{\"o}ln},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {138},
  year      = {2022},
  abstract  = {Der Mensch in seinen Welten - das Konzept des Rautenstrauch Joest Museums verfolgt den Ansatz des Kulturvergleichs und strebt im Zuge dessen die Betonung der Ebenb{\"u}rtigkeit aller Kulturen an. Die Sammlung unterteilt sich nicht - wie gewohnt - anhand geografischer Gesichtspunkte, sondern behandelt Themen, die Menschen auf der ganzen Welt besch{\"a}ftigen. Das in dieser Arbeit gestaltete neue Erscheinungsbild greift den ver{\"a}nderten gesellschaftlichen Stellenwert von ethnologischen Museen auf und positioniert das Museum als aktiven Diskussionsteilnehmer im Zuge des Postkolonialismus. Das entwickelte Key-Visual aus eigener Schrift, einheitlicher Rastersystematik und pr{\"a}gnantem Farbkonzept gibt einen Einblick darin, wie Menschen fr{\"u}her probiert haben, ihre Welt zu verstehen und sie zu erschließen.},
  language  = {de}
}
@masterthesis{Ebert2022,
  type      = {Bachelor Thesis},
  author    = {Ebert, Julia},
  title     = {Die unsichtbare Gefahr : Mikroplastik},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {23 Seiten},
  year      = {2022},
  abstract  = {Bereits ein einziger pr{\"u}fender Blick in einen klassischen Privathaushalt vermittelt einen ersten Eindruck davon, wie allgegenw{\"a}rtig Kunststoff im menschlichen Leben ist. H{\"a}ufig {\"u}bersehen wird dabei Mikroplastik, welches im Verh{\"a}ltnis zu seinen gravierenden Auswirkungen auf Mensch und Umwelt in der {\"o}ffentlichen Diskussion bislang noch wenig Beachtung findet. Das f{\"u}hrt dazu, dass die Problematik durch unaufgekl{\"a}rten Konsum weiter angefacht wird. Die Gestaltung des visuellen Magazins m{\"o}chte {\"u}ber die Konsequenzen von Mikroplastik aufkl{\"a}ren und das Bewusstsein {\"u}ber das pers{\"o}nliche Konsumverhalten sch{\"a}rfen. Mithilfe kurzer Infotexte wird die Problematik aus der wissenschaftlichen Perspektive der Umweltorganisationen beleuchtet und durch ausgew{\"a}hlte Mikroskop-Aufnahmen illustriert. Hiermit werden unsichtbare Krisentreiber endlich sichtbar gemacht.},
  language  = {de}
}
@masterthesis{Braun2022,
  type      = {Bachelor Thesis},
  author    = {Braun, Linus},
  title     = {Faces - Lebenswerte Mobilit{\"a}t in St{\"a}dten},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {173 Seiten},
  year      = {2022},
  abstract  = {Mobilit{\"a}t stellt oftmals ein Problem in St{\"a}dten dar. Es sind Staus, Abgase, Platzmangel, die sich negativ auf die urbane Lebensqualit{\"a}t auswirken. Dies sind externe Auswirkungen der von Autos dominierten Mobilit{\"a}t. Ziel von „Faces" war es, eine effiziente und vor allem attraktive Alternative zum Automobil zu bieten. Daf{\"u}r denkt das Projekt die Straßenbahn neu. Durch kompaktes Design und die Verwendung autonomer Systeme wird eine h{\"o}here Taktung erm{\"o}glicht. Zudem werden die Bahnen flexibler und k{\"o}nnen den Einsatz am Mobilit{\"a}tsbedarf anpassen. Um den Bed{\"u}rfnissen der Fahrg{\"a}ste gerecht zu werden, l{\"a}sst sich das modulare Interior an die Reisedistanz anpassen. Hier wird ein Mobilit{\"a}tskonzept gezeichnet, das einem mit einem hoffnungsvollen Blick auf das Leben in den St{\"a}dten der Zukunft zur{\"u}ckl{\"a}sst.},
  language  = {de}
}
@inproceedings{MorandiButenwegBreisetal.2022,
  author    = {Morandi, Paolo and Butenweg, Christoph and Breis, Khaled and Beyer, Katrin and Magenes, Guido},
  title     = {Behaviour factor q for the seismic design of URM buildings},
  series = {The Third European Conference on Earthquake Engineering and Seismology},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology},
  editor    = {Arion, Cristian and Scupin, Alexandra and Ţigănescu, Alexandru},
  isbn      = {978-973-100-533-1},
  pages     = {1184 -- 1194},
  year      = {2022},
  abstract  = {Recent earthquakes showed that low-rise URM buildings following codecompliant seismic design and details behaved in general very well without substantial damages. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. Values of q-factors are derived for low-rise URM buildings with rigid diaphragms, with reference to modern structural configurations realized in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0 to 3.0 are proposed.},
  language  = {en}
}
@inproceedings{ChicoCaminosSchmitzAttietal.2022,
  author    = {Chico Caminos, Ricardo Alexander and Schmitz, Pascal and Atti, Vikrama Naga Babu and Mahdi, Zahra and Teixeira Boura, Cristiano Jos{\´e} and Sattler, Johannes Christoph and Herrmann, Ulf and Hilger, Patrick and Dieckmann, Simon},
  title     = {Development of a micro heliostat and optical qualification assessment with a 3D laser scanning method},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086262},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {The Solar-Institut J{\"u}lich (SIJ) and the companies Hilger GmbH and Heliokon GmbH from Germany have developed a small-scale cost-effective heliostat, called "micro heliostat". Micro heliostats can be deployed in small-scale concentrated solar power (CSP) plants to concentrate the sun's radiation for electricity generation, space or domestic water heating or industrial process heat. In contrast to conventional heliostats, the special feature of a micro heliostat is that it consists of dozens of parallel-moving, interconnected, rotatable mirror facets. The mirror facets array is fixed inside a box-shaped module and is protected from weathering and wind forces by a transparent glass cover. The choice of the building materials for the box, tracking mechanism and mirrors is largely dependent on the selected production process and the intended application of the micro heliostat. Special attention was paid to the material of the tracking mechanism as this has a direct influence on the accuracy of the micro heliostat. The choice of materials for the mirror support structure and the tracking mechanism is made in favor of plastic molded parts. A qualification assessment method has been developed by the SIJ in which a 3D laser scanner is used in combination with a coordinate measuring machine (CMM). For the validation of this assessment method, a single mirror facet was scanned and the slope deviation was computed.},
  language  = {en}
}
@masterthesis{Scherer2022,
  type      = {Bachelor Thesis},
  author    = {Scherer, Maike},
  title     = {Social Integrity for distributed Workforces : ein Design System f{\"u}r soziale Interaktion eines Unternehmens},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {125 Seiten},
  year      = {2022},
  abstract  = {Eine Applikation f{\"u}r die soziale Interaktion zwischen Teams und Arbeitnehmern eines Unternehmens, welche Remote und/oder Hybrid arbeiten. Wissen teilen, Weiterbilden, Wohlf{\"u}hlen In den letzten zwei Jahren kam es auf Grund der Corona-Pandemie, trotz der vielen Kommunikationsm{\"o}glichkeiten, im Privat-, sowie Arbeitsleben zu erheblichen sozialen Einschr{\"a}nkungen. Genau hier setzt die Applikation „Companion" an, um dem Arbeitnehmer das In-Office-Gef{\"u}hl auch Remote {\"u}bersetzen zu k{\"o}nnen. Der Arbeitnehmer kann mit seinen Kollegen sozialisieren, diese besser kennenlernen und wird zus{\"a}tzlich durch Events und Workshops professionell weitergebildet.},
  language  = {de}
}
@masterthesis{Kaspor2022,
  type      = {Bachelor Thesis},
  author    = {Kaspor, Alexej},
  title     = {Kritik der digitalen Rationalisierung},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {135 Seiten},
  year      = {2022},
  abstract  = {Digitalisierung macht's m{\"o}glich: mittlerweile beziehen sich Designer:innen in ihrer Konzeptentwicklung immer h{\"a}ufiger auf Referenzdesigns. Sie picken sich die Eigenschaften aus ihnen heraus, von denen sie sich die gr{\"o}ßte Marktf{\"a}higkeit versprechen, und basteln sie zu einem neuen Produkt zusammen. Voil{\`a}. Doch wie unkonventionell kann Design noch sein? Wie viel Luft bleibt der Kreativit{\"a}t unter dem immer enger geschn{\"u}rten Korsett der Marktf{\"a}higkeit? Alexej Kaspor er{\"o}ffnet die Diskussion mit einem provokanten Projekt, das einen kritischen Blick in die Zukunft des Industriedesigns wirft. Dazu fasst er g{\"a}ngige Designprogramme in einer Software zusammen und verbindet sie mit einer k{\"u}nstlichen Intelligenz, die die aktuelle Entwicklung digital rationalisieren und auf die Spitze treiben soll. Diese f{\"u}hrt Meta-Analysen {\"u}ber das Nutzungsverhalten durch und pr{\"u}ft damit Frameworks von Referenzdesigns auf ihre Vermarktbarkeit. Aus diesen entwickelt sie dann Gestaltungsvorschl{\"a}ge, ohne beim Seiltanz zwischen Trendh{\"o}rigkeit und Scheinindividualismus aus dem Gleichgewicht zu kommen. Innerhalb von Sekunden werden den Designer:innen perfekte Vorschl{\"a}ge {\"u}bers Metaverse simuliert. Auf dem Silbertablett serviert, {\"u}bersichtlich und gef{\"a}hrlich einfach. Bereit, kombiniert und in Produktion gebracht zu werden. Auch mit dem Tracking der KI kann niemand mithalten: um immer am Puls der Zeit zu bleiben, benachrichtigt sie die Designer:innen in Echtzeit {\"u}ber die neuesten Innovationen und Trends. Ressourcenraubendes Herumprobieren in CAD-Programmen geh{\"o}rt also der Vergangenheit an. Das Programm schafft Abhilfe, und verspricht dabei auch noch die h{\"o}chste Effizienz, konkret: garantiertes Kapital. Schlagende Argumente, die die Schw{\"a}chen der Konsumgesellschaft und Kommerzialisierung gezielt ausgenutzen. Es entsteht die perfekte Marketingmaßnahme, ein genialer Treiber f{\"u}r den Turbokapitalismus. Kram, den niemand braucht und zynische Statussymbole inklusive. Der Stolz der geltungsbed{\"u}rftigen Designer:innen wird dabei selbstverst{\"a}ndlich nicht untergraben. Sie sollen mitziehen. Mit zahlreichen Notches wird der Erfolg und die Konkurrenzf{\"a}higkeit des Produkts prognostiziert und ihnen Honig ums Maul geschmiert. Die beklemmende Vorahnung wird sich best{\"a}tigen. Schritt f{\"u}r Schritt enteignet die KI den Designer:innen ihre Kreativit{\"a}t, bis sie nicht mehr sind als die Kurator:innen berechenbarer Produktkonzepte. Der Sp{\"a}tkapitalismus hat sie in der Mangel. Versprochen: diese Arbeit l{\"a}sst niemanden kalt.},
  language  = {de}
}
@inproceedings{SattlerSchneiderAngeleetal.2022,
  author    = {Sattler, Johannes Christoph and Schneider, Iesse Peer and Angele, Florian and Atti, Vikrama Naga Babu and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Development of heliostat field calibration methods: Theory and experimental test results},
  series = {SolarPACES 2022 conference proceedings},
  booktitle = {SolarPACES 2022 conference proceedings},
  number    = {1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.678},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In this work, three patent pending calibration methods for heliostat fields of central receiver systems (CRS) developed by the Solar-Institut J{\"u}lich (SIJ) of the FH Aachen University of Applied Sciences are presented. The calibration methods can either operate in a combined mode or in stand-alone mode. The first calibration method, method A, foresees that a camera matrix is placed into the receiver plane where it is subjected to concentrated solar irradiance during a measurement process. The second calibration method, method B, uses an unmanned aerial vehicle (UAV) such as a quadrocopter to automatically fly into the reflected solar irradiance cross-section of one or more heliostats (two variants of method B were tested). The third calibration method, method C, foresees a stereo central camera or multiple stereo cameras installed e.g. on the solar tower whereby the orientations of the heliostats are calculated from the location detection of spherical red markers attached to the heliostats. The most accurate method is method A which has a mean accuracy of 0.17 mrad. The mean accuracy of method B variant 1 is 1.36 mrad and of variant 2 is 1.73 mrad. Method C has a mean accuracy of 15.07 mrad. For method B there is great potential regarding improving the measurement accuracy. For method C the collected data was not sufficient for determining whether or not there is potential for improving the accuracy.},
  language  = {en}
}
@inproceedings{SattlerAttiAlexopoulosetal.2022,
  author    = {Sattler, Johannes Christoph and Atti, Vikrama Naga Babu and Alexopoulos, Spiros and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Dutta, Siddharth and Kioutsioukis, Ioannis},
  title     = {DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook},
  series = {SolarPACES 2022 conference proceedings},
  booktitle = {SolarPACES 2022 conference proceedings},
  number    = {1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.731},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut J{\"u}lich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 \% based on the tested days. The result fulfils SIJ's aim to achieve a reliability of around 70 \%, but SIJ aims to still improve the DNI forecast quality.},
  language  = {en}
}
@masterthesis{NiggeMans2022,
  type      = {Bachelor Thesis},
  author    = {Nigge-Mans, Leonard},
  title     = {Entwicklung einer Arbeitsplatzleuchte},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {74 Seiten},
  year      = {2022},
  abstract  = {F{\"u}r manche mag es banal wirken, doch f{\"u}r Gestalter:innen ist sie unverzichtbar: eine wirklich gute Leuchte f{\"u}r den Arbeitsplatz. Sie hat n{\"a}mlich einen enormen Einfluss auf die Konzentration und den Komfort. Zudem erm{\"o}glicht gutes Licht erst ein sauberes und farbechtes Ergebnis. Daf{\"u}r wurde in diesem Projekt die perfekte Leuchte entwickelt. Sie leuchtet die Arbeitsfl{\"a}che ideal aus und unterst{\"u}tzt das Lesen, Schreiben oder die Arbeit mit technischen Ger{\"a}ten. Durch f{\"u}nf Drehpunkte ist die Leuchte in alle Richtungen zu bewegen und l{\"a}sst sich somit individuell auf ihre Aufgaben anpassen. Außerdem wurde Wert daraufgelegt, bestehende Normen und Vorschiften einzuhalten, um den Arbeit- und Gesundheitsschutz zu gew{\"a}hrleisten. Feierabend? Durch die Dim-Funktion wird die Arbeitsleuchte zu einer gem{\"u}tlichen Lichtquelle. Unter anderem durch die unsichtbare Stromf{\"u}hrung {\"u}berzeugt die Lampe mit ihrer minimalistischen Designsprache und l{\"a}sst sich in unterschiedlichste R{\"a}ume integrieren.},
  language  = {de}
}
@misc{OPUS4-11128,
  title     = {Dimensionen Nr. 30 / 2023: Magazin der FH Aachen University of Applied Sciences - Der Mensch im Mittelpunkt},
  address   = {Aachen},
  organization    = {Fachhochschule Aachen},
  pages     = {62 Seiten},
  year      = {2023},
  abstract  = {06| Warum es gemeinsam besser geht 10| Interview 14| Wer ist hier der Boss? 18| Schnittstelle zwischen Mensch und Technik 22| Zweite Heimat J{\"u}lich 28| Zwischen Angst und Hoffnung 32| Eine Sternstunde f{\"u}r die FH Aachen 36| Gegen alle Widerst{\"a}nde 38| Ein Ort, der bleibt 42| Der Aufbl{\"u}hende 46| Der Computer sitzt am Steuer 52| Da geht das Herz auf 54| Hoch hinaus 58| Beratungsangebote 60| Das alte Sch{\"a}tzchen},
  language  = {de}
}
@phdthesis{Bung2023,
  author    = {Bung, Daniel Bernhard},
  title     = {Imaging techniques for investigation of free-surface flows in hydraulic laboratories},
  doi       = {10.25926/BUW/0-172},
  pages     = {XXIII, 218 Seiten},
  year      = {2023},
  abstract  = {This thesis aims at the presentation and discussion of well-accepted and new imaging techniques applied to different types of flow in common hydraulic engineering environments. All studies are conducted in laboratory conditions and focus on flow depth and velocity measurements. Investigated flows cover a wide range of complexity, e.g. propagation of waves, dam-break flows, slightly and fully aerated spillway flows as well as highly turbulent hydraulic jumps. Newimagingmethods are compared to different types of sensorswhich are frequently employed in contemporary laboratory studies. This classical instrumentation as well as the general concept of hydraulic modeling is introduced to give an overview on experimental methods. Flow depths are commonly measured by means of ultrasonic sensors, also known as acoustic displacement sensors. These sensors may provide accurate data with high sample rates in case of simple flow conditions, e.g. low-turbulent clear water flows. However, with increasing turbulence, higher uncertainty must be considered. Moreover, ultrasonic sensors can provide point data only, while the relatively large acoustic beam footprint may lead to another source of uncertainty in case of relatively short, highly turbulent surface fluctuations (ripples) or free-surface air-water flows. Analysis of turbulent length and time scales of surface fluctuations from point measurements is also difficult. Imaging techniques with different dimensionality, however, may close this gap. It is shown in this thesis that edge detection methods (known from computer vision) may be used for two-dimensional free-surface extraction (i.e. from images taken through transparant sidewalls in laboratory flumes). Another opportunity in hydraulic laboratory studies comes with the application of stereo vision. Low-cost RGB-D sensors can be used to gather instantaneous, three-dimensional free-surface elevations, even in flows with very high complexity (e.g. aerated hydraulic jumps). It will be shown that the uncertainty of these methods is of similar order as for classical instruments. Particle Image Velocimetry (PIV) is a well-accepted and widespread imaging technique for velocity determination in laboratory conditions. In combination with high-speed cameras, PIV can give time-resolved velocity fields in 2D/3D or even as volumetric flow fields. PIV is based on a cross-correlation technique applied to small subimages of seeded flows. The minimum size of these subimages defines the maximum spatial resolution of resulting velocity fields. A derivative of PIV for aerated flows is also available, i.e. the so-called Bubble Image Velocimetry (BIV). This thesis emphasizes the capacities and limitations of both methods, using relatively simple setups with halogen and LED illuminations. It will be demonstrated that PIV/BIV images may also be processed by means of Optical Flow (OF) techniques. OF is another method originating from the computer vision discipline, based on the assumption of image brightness conservation within a sequence of images. The Horn-Schunck approach, which has been first employed to hydraulic engineering problems in the studies presented herein, yields dense velocity fields, i.e. pixelwise velocity data. As discussed hereinafter, the accuracy of OF competes well with PIV for clear-water flows and even improves results (compared to BIV) for aerated flow conditions. In order to independently benchmark the OF approach, synthetic images with defined turbulence intensitiy are used. Computer vision offers new opportunities that may help to improve the understanding of fluid mechanics and fluid-structure interactions in laboratory investigations. In prototype environments, it can be employed for obstacle detection (e.g. identification of potential fish migration corridors) and recognition (e.g. fish species for monitoring in a fishway) or surface reconstruction (e.g. inspection of hydraulic structures). It can thus be expected that applications to hydraulic engineering problems will develop rapidly in near future. Current methods have not been developed for fluids in motion. Systematic future developments are needed to improve the results in such difficult conditions.},
  language  = {en}
}
@article{BergmannMoehrenBraunetal.2023,
  author    = {Bergmann, Ole and M{\"o}hren, Felix and Braun, Carsten and Janser, Frank},
  title     = {On the influence of elasticity on swept propeller noise},
  series = {AIAA SCITECH 2023 Forum},
  journal   = {AIAA SCITECH 2023 Forum},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2023-0210},
  year      = {2023},
  abstract  = {High aerodynamic efficiency requires propellers with high aspect ratios, while propeller sweep potentially reduces noise. Propeller sweep and high aspect ratios increase elasticity and coupling of structural mechanics and aerodynamics, affecting the propeller performance and noise. Therefore, this paper analyzes the influence of elasticity on forward-swept, backward-swept, and unswept propellers in hover conditions. A reduced-order blade element momentum approach is coupled with a one-dimensional Timoshenko beam theory and Farassat's formulation 1A. The results of the aeroelastic simulation are used as input for the aeroacoustic calculation. The analysis shows that elasticity influences noise radiation because thickness and loading noise respond differently to deformations. In the case of the backward-swept propeller, the location of the maximum sound pressure level shifts forward by 0.5 °, while in the case of the forward-swept propeller, it shifts backward by 0.5 °. Therefore, aeroacoustic optimization requires the consideration of propeller deformation.},
  language  = {en}
}
@article{ThomaThomessenGardietal.2023,
  author    = {Thoma, Andreas and Thomessen, Karolin and Gardi, Alessandro and Fisher, A. and Braun, Carsten},
  title     = {Prioritising paths: An improved cost function for local path planning for UAV in medical applications},
  series = {The Aeronautical Journal},
  journal   = {The Aeronautical Journal},
  number    = {First View},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  issn      = {0001-9240 (Print)},
  doi       = {10.1017/aer.2023.68},
  pages     = {1 -- 18},
  year      = {2023},
  abstract  = {Even the shortest flight through unknown, cluttered environments requires reliable local path planning algorithms to avoid unforeseen obstacles. The algorithm must evaluate alternative flight paths and identify the best path if an obstacle blocks its way. Commonly, weighted sums are used here. This work shows that weighted Chebyshev distances and factorial achievement scalarising functions are suitable alternatives to weighted sums if combined with the 3DVFH* local path planning algorithm. Both methods considerably reduce the failure probability of simulated flights in various environments. The standard 3DVFH* uses a weighted sum and has a failure probability of 50\% in the test environments. A factorial achievement scalarising function, which minimises the worst combination of two out of four objective functions, reaches a failure probability of 26\%; A weighted Chebyshev distance, which optimises the worst objective, has a failure probability of 30\%. These results show promise for further enhancements and to support broader applicability.},
  language  = {en}
}
@article{RuebbelkeVoegeleGrajewskietal.2023,
  author    = {R{\"u}bbelke, Dirk and V{\"o}gele, Stefan and Grajewski, Matthias and Zobel, Luzy},
  title     = {Cross border adjustment mechanism: Initial data for the assessment of hydrogen-based steel production},
  series = {Data in Brief},
  volume    = {47},
  journal   = {Data in Brief},
  number    = {Article 108907},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2352-3409},
  doi       = {10.1016/j.dib.2023.108907},
  pages     = {1 -- 5},
  year      = {2023},
  abstract  = {Ambitious climate targets affect the competitiveness of industries in the international market. To prevent such industries from moving to other countries in the wake of increased climate protection efforts, cost adjustments may become necessary. Their design requires knowledge of country-specific production costs. Here, we present country-specific cost figures for different production routes of steel, paying particular attention to transportation costs. The data can be used in floor price models aiming to assess the competitiveness of different steel production routes in different countries (R{\"u}bbelke, 2022).},
  language  = {en}
}
@article{CheenakulaGriebelMontagetal.2023,
  author    = {Cheenakula, Dheeraja and Griebel, Kai and Montag, David and Gr{\"o}mping, Markus},
  title     = {Concept development of a mainstream deammonification and comparison with conventional process in terms of energy, performance and economical construction perspectives},
  series = {Frontiers in Microbiology},
  volume    = {14},
  journal   = {Frontiers in Microbiology},
  number    = {11155235},
  editor    = {Huang, Xiaowu},
  publisher = {Frontiers},
  issn      = {1664-302X},
  doi       = {10.3389/fmicb.2023.1155235},
  pages     = {1 -- 15},
  year      = {2023},
  abstract  = {Deammonification for nitrogen removal in municipal wastewater in temperate and cold climate zones is currently limited to the side stream of municipal wastewater treatment plants (MWWTP). This study developed a conceptual model of a mainstream deammonification plant, designed for 30,000 P.E., considering possible solutions corresponding to the challenging mainstream conditions in Germany. In addition, the energy-saving potential, nitrogen elimination performance and construction-related costs of mainstream deammonification were compared to a conventional plant model, having a single-stage activated sludge process with upstream denitrification. The results revealed that an additional treatment step by combining chemical precipitation and ultra-fine screening is advantageous prior the mainstream deammonification. Hereby chemical oxygen demand (COD) can be reduced by 80\% so that the COD:N ratio can be reduced from 12 to 2.5. Laboratory experiments testing mainstream conditions of temperature (8-20°C), pH (6-9) and COD:N ratio (1-6) showed an achievable volumetric nitrogen removal rate (VNRR) of at least 50 gN/(m3∙d) for various deammonifying sludges from side stream deammonification systems in the state of North Rhine-Westphalia, Germany, where m3 denotes reactor volume. Assuming a retained Norganic content of 0.0035 kgNorg./(P.E.∙d) from the daily loads of N at carbon removal stage and a VNRR of 50 gN/(m3∙d) under mainstream conditions, a resident-specific reactor volume of 0.115 m3/(P.E.) is required for mainstream deammonification. This is in the same order of magnitude as the conventional activated sludge process, i.e., 0.173 m3/(P.E.) for an MWWTP of size class of 4. The conventional plant model yielded a total specific electricity demand of 35 kWh/(P.E.∙a) for the operation of the whole MWWTP and an energy recovery potential of 15.8 kWh/(P.E.∙a) through anaerobic digestion. In contrast, the developed mainstream deammonification model plant would require only a 21.5 kWh/(P.E.∙a) energy demand and result in 24 kWh/(P.E.∙a) energy recovery potential, enabling the mainstream deammonification model plant to be self-sufficient. The retrofitting costs for the implementation of mainstream deammonification in existing conventional MWWTPs are nearly negligible as the existing units like activated sludge reactors, aerators and monitoring technology are reusable. However, the mainstream deammonification must meet the performance requirement of VNRR of about 50 gN/(m3∙d) in this case.},
  language  = {en}
}
@masterthesis{Vonderhagen2023,
  type      = {Bachelor Thesis},
  author    = {Vonderhagen, Lisa},
  title     = {KiBix : Fahrradfahren f{\"u}r Kinder - das nachhaltige Kinderfahrrad aus Kunststoff als Abo-Sharing-System},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {151 Seiten},
  year      = {2023},
  abstract  = {Jedes Jahr werden Hunderttausende Fahrradrahmen produziert. 90 \% davon werden in Asien hergestellt und von dort {\"u}ber die ganze Welt versendet. Mehr als 80 \% der Rahmen werden nach der Nutzung wieder nach Asien zur{\"u}ckgeschickt und landen dort auf riesigen Fahrradfriedh{\"o}fen. Das Kinderfahrradkonzept "KiBix" wirkt diesem Problem entgegen, indem es eine Alternative f{\"u}r das regelm{\"a}ßige Kaufen von neuen Kinderfahrr{\"a}dern bietet. Im Fokus stehen der Kinderfahrradrahmen und die Gabel aus Kunststoff, welche im Spritzgussverfahren produziert werden. Das City-Bike ist in ein Abo-Sharing-System mit R{\"a}dern in unterschiedlichen Gr{\"o}ßen eingebettet, welches durch eine monatliche Geb{\"u}hr wie das Eigene genutzt werden kann. Der hohlgespritzte Rahmen erm{\"o}glicht die Integration kleiner Boxen im Inneren, in denen Kinder ihre pers{\"o}nlichen "Sch{\"a}tze" mitnehmen k{\"o}nnen. Somit vereint das Konzept die drei Segmente Material/Produktion, Sharing-System und die Mitnahme des "Schatzes". "KiBix" gibt Kindern in Zeiten der Digitalisierung und der globalen Erw{\"a}rmung die M{\"o}glichkeit, selbstbestimmt und nachhaltig die Welt zu erkunden.},
  language  = {de}
}
@masterthesis{Mok2023,
  type      = {Bachelor Thesis},
  author    = {Mok, Pia Peixia},
  title     = {Flowcean Qi : a gentle Reminder to take a deep breath.},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {84 Seiten},
  year      = {2023},
  abstract  = {Atmen tut jeder, automatisch. Es wird nicht auf die Ausf{\"u}hrung geachtet. Doch was, wenn nur ein wenig Feinschliff an unserer Atmung bereits Großes f{\"u}r unsere Gesundheit bewirkt? Von etlichen unterschiedlichen Studien wurde bezeugt, dass Atmung und Empfinden eins sind. Das pers{\"o}nliche Empfinden ist unser Portal zur Außenwelt. Die Art wie wir auf {\"a}ußerliche Reize reagieren, wie achtsam wir im Tun und Denken sind, spiegelt unsere Innenwelt und k{\"o}rperliches Wohlbefinden wieder. FLOWCEAN QI dient dazu, Stress- und Angstst{\"o}rungen im Alltagsleben f{\"u}r Berufst{\"a}tige mit hohem Stressfaktor zu reduzieren. Vor allem, um das Gesundheitssystem zu entlasten und die Psyche der Menschen gesund wieder aufzubauen. Sind Berufst{\"a}tige viel gelassener, steigen auch Leistung und Produktivit{\"a}t. Es ist immer wichtig, die Kernursache von Problemen zu finden und zu l{\"o}sen. So k{\"o}nnen auch vielerlei andere auf die Psyche zur{\"u}ckzuf{\"u}hrende Probleme der Gesellschaft gel{\"o}st werden. FLOWCEAN QI agiert durch modernste Technologie aktiv mit dem Nutzer. Die KI-Assistenz gestaltet das Lernen der Atemtechniken spaßiger, was wiederum den Lerneffekt verbessert. Der Beamer wird im Innenbereich platziert und der Tracker begleitet einen unterwegs und zeichnet die Datenanalyse auf. F{\"u}r mehr Datenschutz ist das Armband ein reines offline Produkt. F{\"o}rmlich sollte es dem Nutzer nah sein, naturverbunden, vertrauensw{\"u}rdig und beruhigend wirken. FLOWCEAN QI basiert gestalterisch auf eine antike japanische Philosophie namens „Kintsugi". Nach der japanischen Philosophie Kintsugi werden zerbrochene Teegl{\"a}ser wiederzusammengeklebt statt weggeworfen. Die in Teile getrennten Elemente werden glatt und geschmeidig wieder zusammengef{\"u}gt. Sie formen ein neues Ganzes, dass die Sch{\"o}nheit des Originals meist {\"u}bertrifft. Die {\"A}sthetik hinter „Kintsugi" nennt man „Wabi-Sabi". Es bedeutet, die Sch{\"o}nheit im Verg{\"a}nglichen, Alten oder Fehlerhaften zu verstehen. Die Philosophie dahinter wird metaphorisch auf das Design abgebildet und auf unsere Gesundheit {\"u}bertragen. Statt letztere zu ignorieren, schenken wir ihr unsere volle Aufmerksamkeit. Ziel der Produkte ist, uns stets an sie zu erinnern, sodass wir t{\"a}glich an unserem Wohlbefinden arbeiten k{\"o}nnen.},
  language  = {de}
}
@masterthesis{Baumann2023,
  type      = {Bachelor Thesis},
  author    = {Baumann, Ivana Edita},
  title     = {Toolbar : Werkzeuge des Grafikdesigns},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {96 Seiten},
  year      = {2023},
  abstract  = {Von Zeichentisch und Letraset zu inhaltsbasierter F{\"u}llung und OpenType - wie sich die Werkzeuge des Grafikdesigns entwickelt und die Gestaltungsprozesse beeinflusst haben. Die Bachelorarbeit „Toolbar: Werkzeuge des Grafikdesigns" setzt sich mit der eigenen Disziplin, dem Grafikdesign, auseinander und geht dabei seinen Wurzeln, den Werkzeugen, nach. Im Rahmen dessen werden in Gespr{\"a}chen mit verschiedenen Gestalter*innen Tools und Technologien des Grafikdesigns untersucht und verglichen - angefangen vom analogen Paste-Up bis hin zu modernen Designmethoden. Dabei wird diskutiert, wie sich die Werkzeuge im Laufe der Zeit entwickelt haben und welche Auswirkungen dies auf das Grafikdesign und die Positionierung von Designer*innen hatte. Außerdem wird die Bedeutung von Werkzeugen im kreativen Prozess und ihre Auswirkungen auf die Gestaltung hinterfragt und aufgezeigt.},
  language  = {de}
}
@article{RingersBialonskiEgeetal.2023,
  author    = {Ringers, Christa and Bialonski, Stephan and Ege, Mert and Solovev, Anton and Hansen, Jan Niklas and Jeong, Inyoung and Friedrich, Benjamin M. and Jurisch-Yaksi, Nathalie},
  title     = {Novel analytical tools reveal that local synchronization of cilia coincides with tissue-scale metachronal waves in zebrafish multiciliated epithelia},
  series = {eLife},
  volume    = {12},
  journal   = {eLife},
  publisher = {eLife Sciences Publications},
  issn      = {2050-084X},
  doi       = {10.7554/eLife.77701},
  pages     = {27 Seiten},
  year      = {2023},
  abstract  = {Motile cilia are hair-like cell extensions that beat periodically to generate fluid flow along various epithelial tissues within the body. In dense multiciliated carpets, cilia were shown to exhibit a remarkable coordination of their beat in the form of traveling metachronal waves, a phenomenon which supposedly enhances fluid transport. Yet, how cilia coordinate their regular beat in multiciliated epithelia to move fluids remains insufficiently understood, particularly due to lack of rigorous quantification. We combine experiments, novel analysis tools, and theory to address this knowledge gap. To investigate collective dynamics of cilia, we studied zebrafish multiciliated epithelia in the nose and the brain. We focused mainly on the zebrafish nose, due to its conserved properties with other ciliated tissues and its superior accessibility for non-invasive imaging. We revealed that cilia are synchronized only locally and that the size of local synchronization domains increases with the viscosity of the surrounding medium. Even though synchronization is local only, we observed global patterns of traveling metachronal waves across the zebrafish multiciliated epithelium. Intriguingly, these global wave direction patterns are conserved across individual fish, but different for left and right noses, unveiling a chiral asymmetry of metachronal coordination. To understand the implications of synchronization for fluid pumping, we used a computational model of a regular array of cilia. We found that local metachronal synchronization prevents steric collisions, i.e., cilia colliding with each other, and improves fluid pumping in dense cilia carpets, but hardly affects the direction of fluid flow. In conclusion, we show that local synchronization together with tissue-scale cilia alignment coincide and generate metachronal wave patterns in multiciliated epithelia, which enhance their physiological function of fluid pumping.},
  language  = {en}
}
@masterthesis{Kremer2023,
  type      = {Bachelor Thesis},
  author    = {Kremer, Laura},
  title     = {LittleHabit : die richtige K{\"o}rperhaltung zur Gewohnheit machen},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {119 Seiten},
  year      = {2023},
  abstract  = {Der heutige Alltag vieler Menschen ist durch l{\"a}ngere Sitz-Einheiten gekennzeichnet, w{\"a}hrend die k{\"o}rperliche Bewegung vernachl{\"a}ssigt wird. Diese Entwicklung kann einen negativen Einfluss auf die Haltung von Personen und ihre Gesundheit haben. In diesem Fall ist eine korrekte Haltung nicht nur f{\"u}r die k{\"o}rperliche, sondern auch f{\"u}r die psychische Gesundheit von großer Relevanz. Die Bachelorarbeit „LittleHabit" erm{\"o}glicht es, dass bei Kindern die Bewegung nach langen Sitz-Einheiten durch gezieltes Training zur Gewohnheit wird. Hierbei wird zwischen dem Zuhause- und dem Schulbereich differenziert. Zu Hause soll das Kind beim Erledigen der Hausaufgaben durch Animationen und Lichtsignale dazu motiviert werden, Bewegungspausen einzulegen. In der Schule soll dieses Vorhaben in reduzierter Form aufgegriffen und mithilfe von Licht- und Farbsignalen umgesetzt werden. Dar{\"u}ber hinaus f{\"o}rdert es die intrinsische Motivation, sodass Kinder aus eigenem Antrieb ein Interesse daf{\"u}r entwickeln, sich nach langen Sitz-Einheiten zu bewegen. LittleHabit setzt einen Baustein f{\"u}r die Entwicklung einer gesunden Sitz-Haltung und zielt darauf ab, Haltungsschw{\"a}chen zu verhindern.},
  language  = {de}
}
@inproceedings{SchwagerAngeleSchwarzboezletal.2023,
  author    = {Schwager, Christian and Angele, Florian and Schwarzb{\"o}zl, Peter and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Model predictive assistance for operational decision making in molten salt receiver systems},
  series = {SolarPACES: Solar Power \& Chemical Energy Systems},
  booktitle = {SolarPACES: Solar Power \& Chemical Energy Systems},
  number    = {2815 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4623-6},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0151514},
  pages     = {8 Seiten},
  year      = {2023},
  abstract  = {Despite the challenges of pioneering molten salt towers (MST), it remains the leading technology in central receiver power plants today, thanks to cost effective storage integration and high cost reduction potential. The limited controllability in volatile solar conditions can cause significant losses, which are difficult to estimate without comprehensive modeling [1]. This paper presents a Methodology to generate predictions of the dynamic behavior of the receiver system as part of an operating assistance system (OAS). Based on this, it delivers proposals if and when to drain and refill the receiver during a cloudy period in order maximize the net yield and quantifies the amount of net electricity gained by this. After prior analysis with a detailed dynamic two-phase model of the entire receiver system, two different reduced modeling approaches where developed and implemented in the OAS. A tailored decision algorithm utilizes both models to deliver the desired predictions efficiently and with appropriate accuracy.},
  language  = {en}
}
@article{BergPostweilerSteuerDankertLeichtScholten2023,
  author    = {Berg-Postweiler, Julia and Steuer-Dankert, Linda and Leicht-Scholten, Carmen},
  title     = {One size does not fit all: Applying antibias trainings in academia},
  series = {The International Journal of Organizational Diversity},
  volume    = {24},
  journal   = {The International Journal of Organizational Diversity},
  number    = {1},
  publisher = {Common Ground Research Networks},
  issn      = {2328-6261 (Print)},
  doi       = {10.18848/2328-6261/CGP/v24i01/1-23},
  pages     = {1 -- 23},
  year      = {2023},
  abstract  = {Antibias training is increasingly demanded and practiced in academia and industry to increase employees' sensitivity to discrimination, racism, and diversity. Under the heading of "Diversity Management," antibias trainings are mainly offered as one-off workshops intending to raise awareness of unconscious biases, create a diversity-affirming corporate culture, promote awareness of the potential of diversity, and ultimately enable the reflection of diversity in development processes. However, coming from childhood education, research and scientific articles on the sustainable effectiveness of antibias in adulthood, especially in academia, are very scarce. In order to fill this research gap, the article aims to explore how sustainable the effects of individual antibias trainings on participants' behavior are. In order to investigate this, participant observation in a qualitative pre-post setting was conducted, analyzing antibias training in an academic context. Two observers actively participated in the training sessions and documented the activities and reflection processes of the participants. Overall, the results question the effectiveness of single antibias trainings and show that a target-group adaptive approach is mandatory owing to the background of the approach in early childhood education. Therefore, antibias work needs to be adapted to the target group's needs and realities of life. Furthermore, the study reveals that single antibias trainings must be embedded in a holistic diversity management approach to stimulate sustainable reflection processes among the target group. This article is one of the first to scientifically evaluate antibias training effectiveness, especially in engineering sciences and the university context.},
  language  = {en}
}
@inproceedings{SteuerDankert2023,
  author    = {Steuer-Dankert, Linda},
  title     = {Training future skills - sustainability, interculturality \& innovation in a digital design thinking format},
  series = {Proceedings of the 19th International CDIO Conference},
  booktitle = {Proceedings of the 19th International CDIO Conference},
  pages     = {12 Seiten},
  year      = {2023},
  abstract  = {The complex questions of today for a world of tomorrow are characterized by their global impact. Solutions must therefore not only be sustainable in the sense of the three pillars of sustainability (economic, environmental, and social) but must also function globally. This goes hand in hand with the need for intercultural acceptance of developed services and products. To achieve this, engineers, as the problem solvers of the future, must be able to work in intercultural teams on appropriate solutions, and be sensitive to intercultural perspectives. To equip the engineers of the future with the so-called future skills, teaching concepts are needed in which students can acquire these methods and competencies in application-oriented formats. The presented course "Applying Design Thinking - Sustainability, Innovation and Interculturality" was developed to teach future skills from the competency areas Digital Key Competencies, Classical Competencies and Transformative Competencies. The CDIO Standard 3.0, in particular the standards 5, 6, 7 and 8, was used as a guideline. The course aims to prepare engineering students from different disciplines and cultures for their future work in an international environment by combining a digital teaching format with an interdisciplinary, transdisciplinary and intercultural setting for solving sustainability challenges. The innovative moment lies in the digital application of design thinking and the inclusion of intercultural as well as trans- and interdisciplinary perspectives in innovation development processes. In this paper, the concept of the course will be presented in detail and the particularities of a digital implementation of design thinking will be addressed. Subsequently, the potentials and challenges will be reflected and practical advice for integrating design thinking in engineering education will be given.},
  language  = {en}
}
@misc{HilleStumpfMayntzetal.2023,
  author    = {Hille, Sebastian and Stumpf, Eike and Mayntz, Joscha and Dahmann, Peter},
  title     = {Prediction of sound exposure caused by a landing motor glider with recuperating propellers},
  series = {AIAA SCITECH 2023 Forum},
  journal   = {AIAA SCITECH 2023 Forum},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2023-0211},
  year      = {2023},
  abstract  = {This paper presents an approach to predicting the sound exposure on the ground caused by a landing aircraft with recuperating propellers. The noise source along the trajectory of a flight specified for a steeper approach is simulated based on measurements of sound power levels and additional parameters of a single propeller placed in a wind tunnel. To validate the measured data/measurement results, these simulations are also supported by overflight measurements of a test aircraft. It is shown that the simple source models of propellers do not provide fully satisfactory results since the sound levels are estimated too low. Nevertheless, with a further reference comparison, margins for an acceptable increase in the sound power level of the aircraft on its now steeper approach path could be estimated. Thus, in this case, a +7 dB increase in SWL would not increase the SEL compared to the conventional approach within only 2 km ahead of the airfield.},
  language  = {en}
}