@article{Finkenberger2014,
  author    = {Finkenberger, Isabel Maria},
  title     = {Vox populi. (Transformations-)potenziale nachkriegsmoderner Freiraumressourcen},
  series = {Stadt+Gr{\"u}n},
  volume    = {2014},
  journal   = {Stadt+Gr{\"u}n},
  number    = {1},
  publisher = {Patzer},
  address   = {Berlin},
  issn      = {0948-9770},
  pages     = {31 -- 35},
  year      = {2014},
  abstract  = {Heute wie damals werden die großz{\"u}gigen und offenen Siedlungsstrukturen der ersten Nachkriegsjahrzehnte mit ihrem hohen Anteil an "Gr{\"u}n" vielfach gesch{\"a}tzt und als solche nicht grundlegend hinterfragt. "Gr{\"u}n" verheißt im Allgemeinen Licht, Luft und Sonne, Freizeit und Erholung und gilt als etwas W{\"u}nschenswertes im st{\"a}dtischen Kontext. Unbeachtet bleibt, dass dem Begriff "Gr{\"u}n" zun{\"a}chst keine Eigenschaften oder Qualit{\"a}ten zugewiesen sind - er sagt noch lange nichts {\"u}ber dessen r{\"a}umliche Qualit{\"a}t, dessen Nutzbarkeit, Erreichbarkeit und Zug{\"a}nglichkeit aus. Abstandsgr{\"u}n und Straßenbegleitgr{\"u}n ist eben auch "Gr{\"u}n". Neben einer quantitativen Argumentation, welche {\"o}kologischen Aspekte wie Biotopvernetzung, Stadt- und Mikroklima ber{\"u}cksichtigt, sollten wir verst{\"a}rkt qualitativ denken und damit die Grundlage f{\"u}r einen erweiterten und wesentlich differenzierteren Diskurs {\"u}ber urbane Freir{\"a}ume ebnen.},
  language  = {de}
}
@article{HoehrPaulssenBenardetal.2014,
  author    = {Hoehr, Cornelia and Paulßen, Elisabeth and Benard, Francois and Lee, Chris Jaeil and Hou, Xinchi and Badesso, Brian and Ferguson, Simon and Miao, Qing and Yang, Hua and Buckley, Ken and Hanemaayer, Victoire and Zeisler, Stefan and Ruth, Thomas J. and Celler, Anna and Schaffer, Paul},
  title     = {⁴⁴ᶢSc production using a water target on a 13 MeV cyclotron},
  series = {Nuclear medicine and biology},
  volume    = {41},
  journal   = {Nuclear medicine and biology},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9614},
  doi       = {10.1016/j.nucmedbio.2013.12.016},
  pages     = {401 -- 406},
  year      = {2014},
  abstract  = {Access to promising radiometals as isotopes for novel molecular imaging agents requires that they are routinely available and inexpensive to obtain. Proximity to a cyclotron center outfitted with solid target hardware, or to an isotope generator for the metal of interest is necessary, both of which can introduce significant hurdles in development of less common isotopes. Herein, we describe the production of ⁴⁴Sc (t₁⸝₂ = 3.97 h, Eavg,β⁺ = 1.47 MeV, branching ratio = 94.27\%) in a solution target and an automated loading system which allows a quick turn-around between different radiometallic isotopes and therefore greatly improves their availability for tracer development. Experimental yields are compared to theoretical calculations.},
  language  = {en}
}
@article{MansurovJandosovKerimkulovaetal.2014,
  author    = {Mansurov, Zulkhair A. and Jandosov, J. M. and Kerimkulova, Almagul R. and Azat, Seitkhan and Zhubanova, Azhar Achmet and Digel, Ilya and Savistkaya, I. S. and Akimbekov, Nuraly S. and Kistaubaeva, A. S.},
  title     = {Nanostructured carbon materials for biomedical use},
  series = {Eurasian chemico-technological journal : quarterly journal of the International Higher Education Academy of Sciences},
  volume    = {15 (2013)},
  journal   = {Eurasian chemico-technological journal : quarterly journal of the International Higher Education Academy of Sciences},
  number    = {3},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  issn      = {1562-3920},
  doi       = {10.18321/ectj224},
  pages     = {209 -- 217},
  year      = {2014},
  abstract  = {One of the priority trends of carbon nanotechnology is creation of nanocomposite systems. Such carbon nanostructured composites were produced using - raw materials based on the products of agricultural waste, such as grape stones, apricot stones, rice husk. These products have a - wide spectrum of application and can be obtained in large quantities. The Institute of Combustion Problems has carried out the work on synthesis of the nanostructured carbon sorbents for multiple applications including the field of biomedicine. The article presents the data on the synthesis and physico-chemical properties of carbonaceous sorbents using physicochemical methods of investigation: separation and purification of biomolecules; isolation of phytohormone - fusicoccin; adsorbent INGO-1 in the form of an adsorption column for blood detoxification, oral (entero) sorbent - INGO-2; the study of efferent and probiotic properties and sorption activity in regard to the lipopolysaccharide (LPS), new biocomposites - based on carbonized rice husk (CRH) and cellular microorganisms; the use of CRH in wound treatment. A new material for blood detoxication (INGO-1) has been obtained. Adsorption of p-cresyl sulfate and indoxyl sulfate has shown that active carbon adsorbent can remove clinically significant level of p-cresyl sulfate and indoxyl sulfate from human plasma. Enterosorbent INGO-2 possesses high adsorption activity in relation to Gram-negative bacteria and their endotoxins. INGO-2 slows down the growth of conditionally pathogenic microorganisms, without having a negative effect on bifido and lactobacteria. The use of enterosorbent INGO-2 for sorption therapy may provide a solution to a complex problem - detoxication of the digestive tract and normalization of the intestinal micro ecology. The immobilized probiotic called "Riso-lact" was registered at the Ministry of Health of the Republic of Kazakhstan as a biologically active food additive. The developed technology is patented and provides production of the medicine in the form of freeze-dried biomass immobilized in vials.},
  language  = {en}
}
@article{YangKriechbaumerAlbrachtetal.2014,
  author    = {Yang, Peng-Fei and Kriechbaumer, Andreas and Albracht, Kirsten and Sanno, Maximilian and Ganse, Bergita and Koy, Timmo and Shang, Peng and Br{\"u}ggemann, Gert-Peter and M{\"u}ller, Lars Peter and Rittweger, J{\"o}rn},
  title     = {A novel optical approach for assessing in vivo bone segment deformation and its application in muscle-bone relationship studies in humans},
  series = {Journal of Orthopaedic Translation},
  volume    = {2},
  journal   = {Journal of Orthopaedic Translation},
  number    = {4},
  publisher = {Elsevier},
  address   = {Singapore},
  issn      = {2214-0328},
  doi       = {10.1016/j.jot.2014.07.078},
  pages     = {238 -- 238},
  year      = {2014},
  language  = {en}
}
@article{MuellerHirschfeldLambertzetal.2014,
  author    = {M{\"u}ller, Martin and Hirschfeld, Julian A. and Lambertz, Rita and Schulze Lohoff, Andreas and Lustfeld, Hans and Pfeifer, Heinz and Reißel, Martin},
  title     = {Validation of a novel method for detecting and stabilizing malfunctioning areas in fuel cell stacks},
  series = {Journal of power sources},
  volume    = {272},
  journal   = {Journal of power sources},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2755 (E-Journal); 0378-7753 (Print)},
  doi       = {10.1016/j.jpowsour.2014.08.045},
  pages     = {225 -- 232},
  year      = {2014},
  abstract  = {In this paper a setup for detecting malfunctioning areas of MEAs in fuel cell stacks is described. Malfunctioning areas generate electric cross currents inside bipolar plates. To exploit this we suggest bipolar plates consisting not of two but of three layers. The third one is a highly conducting layer and segmented such that the cross currents move along the segments to the surface of the stack where they can be measured by an inductive sensor. With this information a realistic model can be used to detect the malfunctioning area. Furthermore the third layer will prevent any current inhomogeneity of a malfunctioning cell to spread to neighbouring cells in the stack. In this work the results of measurements in a realistic cell setup will be compared with the results obtained in simulation studies with the same configuration. The basis for the comparison is the reliable characterisation of the electrical properties of the cell components and the implication of these results into the simulation model. The experimental studies will also show the limits in the maximum number of segments, which can be used for a reliable detection of cross currents.},
  language  = {en}
}
@article{DachwaldMikuckiTulaczyketal.2014,
  author    = {Dachwald, Bernd and Mikucki, Jill and Tulaczyk, Slawek and Digel, Ilya and Espe, Clemens and Feldmann, Marco and Francke, Gero and Kowalski, Julia and Xu, Changsheng},
  title     = {IceMole : A maneuverable probe for clean in situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems},
  series = {Annals of Glaciology},
  volume    = {55},
  journal   = {Annals of Glaciology},
  number    = {65},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  issn      = {1727-5644},
  doi       = {10.3189/2014AoG65A004},
  pages     = {14 -- 22},
  year      = {2014},
  abstract  = {There is significant interest in sampling subglacial environments for geobiological studies, but they are difficult to access. Existing ice-drilling technologies make it cumbersome to maintain microbiologically clean access for sample acquisition and environmental stewardship of potentially fragile subglacial aquatic ecosystems. The IceMole is a maneuverable subsurface ice probe for clean in situ analysis and sampling of glacial ice and subglacial materials. The design is based on the novel concept of combining melting and mechanical propulsion. It can change melting direction by differential heating of the melting head and optional side-wall heaters. The first two prototypes were successfully tested between 2010 and 2012 on glaciers in Switzerland and Iceland. They demonstrated downward, horizontal and upward melting, as well as curve driving and dirt layer penetration. A more advanced probe is currently under development as part of the Enceladus Explorer (EnEx) project. It offers systems for obstacle avoidance, target detection, and navigation in ice. For the EnEx-IceMole, we will pay particular attention to clean protocols for the sampling of subglacial materials for biogeochemical analysis. We plan to use this probe for clean access into a unique subglacial aquatic environment at Blood Falls, Antarctica, with return of a subglacial brine sample.},
  language  = {en}
}
@article{PyschnyDoeringFeldmann2014,
  author    = {Pyschny, D. and D{\"o}ring, Bernd and Feldmann, Marco},
  title     = {Ermittlung der thermischen Leistungsf{\"a}higkeit des neuartigen multifunktionalen Verbunddeckensystems InaDeck},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen},
  volume    = {89},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen},
  number    = {3},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {116 -- 124},
  year      = {2014},
  language  = {de}
}
@article{HuckPoghossianBaeckeretal.2014,
  author    = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Chaudhuri, S. and Zander, W. and Schubert, J. and Begoyan, Vardges K. and Buniatyan, V. V. and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {Capacitively coupled electrolyte-conductivity sensor based on high-k material of barium strontium titanate},
  series = {Sensors and actuators. B: Chemical},
  journal   = {Sensors and actuators. B: Chemical},
  number    = {198},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2014.02.103},
  pages     = {102 -- 109},
  year      = {2014},
  language  = {en}
}
@article{HuckPoghossianBaeckeretal.2014,
  author    = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Reisert, Steffen and Schubert, J. and Zander, W. and Begoyan, Vardges K. and Buniatyan, V. V. and Sch{\"o}ning, Michael Josef},
  title     = {Chemical sensors based on a high-k perovskite oxide of barium strontium titanate},
  series = {Procedia Engineering},
  volume    = {87},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2014.11.258},
  pages     = {28 -- 31},
  year      = {2014},
  abstract  = {High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors for liquids. In this work, BST films have been applied as a sensitive transducer material for a label-free detection of adsorbed charged macromolecules (positively charged polyelectrolytes) and concentration of hydrogen peroxide vapor as well as protection insulator layer for a contactless electrolyte-conductivity sensor. The experimental results of characterization of individual sensors are presented. Special emphasis is devoted towards the development of a capacitively-coupled contactless electrolyte-conductivity sensor.},
  language  = {en}
}
@article{FredebeulKrein2014,
  author    = {Fredebeul-Krein, Markus},
  title     = {Ziele der Sozial- und Verteilungspolitik},
  series = {Das Wirtschaftsstudium : WISU ; Zeitschrift f{\"u}r Ausbildung, Examen und Weiterbildung},
  volume    = {43},
  journal   = {Das Wirtschaftsstudium : WISU ; Zeitschrift f{\"u}r Ausbildung, Examen und Weiterbildung},
  number    = {7},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {907 -- 912},
  year      = {2014},
  language  = {de}
}
@article{BohrnStuetzFleischeretal.2013,
  author    = {Bohrn, Ulrich and St{\"u}tz, Evamaria and Fleischer, Maximilian and Sch{\"o}ning, Michael Josef and Wagner, Patrick},
  title     = {Using a cell-based gas biosensor for investigation of adverse effects of acetone vapors in vitro},
  series = {Biosensors and Bioelectronics. 40 (2013), H. 1},
  journal   = {Biosensors and Bioelectronics. 40 (2013), H. 1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0956-5663},
  pages     = {393 -- 400},
  year      = {2013},
  language  = {en}
}
@article{HennemannKohlReisertetal.2013,
  author    = {Hennemann, J{\"o}rg and Kohl, Claus-Dieter and Reisert, Steffen and Kirchner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Copper oxide nanofibres for detection of hydrogen peroxide vapour at high concentrations},
  series = {physica status solidi (a)},
  volume    = {210},
  journal   = {physica status solidi (a)},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201200775},
  pages     = {859 -- 863},
  year      = {2013},
  abstract  = {We present a sensor concept based on copper(II)oxide (CuO) nanofibres for the detection of hydrogen peroxide (H2O2) vapour in the percent per volume (\% v/v) range. The fibres were produced by using the electrospinning technique. To avoid water condensation in the pores, the fibres were initially modified by an exposure to H2S to get an enclosed surface. By a thermal treatment at 350 °C the fibres were oxidised back to CuO. Thereby, the visible pores disappear which was verified by SEM analysis. The fibres show a decrease of resistance with increasing H2O2 concentration which is due to the fact that hydrogen peroxide is an oxidising gas and CuO a p-type semiconductor. The sensor shows a change of resistance within the minute range to the exposure until the maximum concentration of 6.9\% v/v H2O2. At operating temperatures below 450 °C the corresponding sensor response to a concentration of 4.1\% v/v increases. The sensor shows a good reproducibility of the signal at different measurements. CuO seems to be a suitable candidate for the detection of H2O2 vapour at high concentrations. Resistance behaviour of the sensor under exposure to H2O2 vapours between 2.3 and 6.9\% v/v at an operating temperature of 450 °C.},
  language  = {en}
}
@article{ReisertSchneiderGeissleretal.2013,
  author    = {Reisert, Steffen and Schneider, Benno and Geissler, Hanno and Gompel, Matthias van and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Multi-sensor chip for the investigation of different types of metal oxides for the detection of H2O2 in the ppm range},
  series = {physica status solidi (a)},
  volume    = {210},
  journal   = {physica status solidi (a)},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  pages     = {898 -- 904},
  year      = {2013},
  abstract  = {In this work, a multi-sensor chip for the investigation of the sensing properties of different types of metal oxides towards hydrogen peroxide in the ppm range is presented. The fabrication process and physical characterization of the multi-sensor chip are described. Pure SnO2 and WO3 as well as Pd- and Pt-doped SnO2 films are characterized in terms of their sensitivity to H2O2. The sensing films have been prepared by drop-coating of water-dispensed nano-powders. A physical characterization, including scanning electron microscopy and X-ray diffraction analysis of the deposited metal-oxide films, was done. From the measurements in hydrogen peroxide atmosphere, it could be shown, that all of the tested metal oxide films are suitable for the detection of H2O2 in the ppm range. The highest sensitivity and reproducibility was achieved using Pt-doped SnO2. Calibration plot of a SnO2, WO3, Pt-, and Pd-doped SnO2 gas sensor for H2O2 concentrations in the ppm range.},
  language  = {en}
}
@article{FeuchtSchoenbachLanzletal.2013,
  author    = {Feucht, Nikolaus and Sch{\"o}nbach, Etienne Michael and Lanzl, Ines and Kotliar, Konstantin and Lohmann, Chris Patrick and Maier, Mathias},
  title     = {Changes in the foveal microstructure after intravitreal bevacizumab application in patients with retinal vascular disease},
  series = {Clinical Ophthalmology},
  volume    = {7},
  journal   = {Clinical Ophthalmology},
  publisher = {Dove Medical Press},
  address   = {Auckland, New Zealand},
  issn      = {1177-5483},
  pages     = {173 -- 178},
  year      = {2013},
  language  = {en}
}
@article{GebhardtFateri2013,
  author    = {Gebhardt, Andreas and Fateri, Miranda},
  title     = {3D printing and its applications},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {10},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-35626},
  year      = {2013},
  abstract  = {Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen r{\"u}ckt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten {\"O}ffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollst{\"a}ndiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag ver{\"a}ndern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch gepr{\"a}gt sind und sich nur punktuell auf Beispiele st{\"u}tzen. Dieser Beitrag geht von den Bed{\"u}rfnissen der Menschen aus, wie sie z.B. in der Maslow'schen Bed{\"u}rfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.},
  language  = {en}
}
@article{KirchnerOberlaenderSusoetal.2013,
  author    = {Kirchner, Patrick and Oberl{\"a}nder, Jan and Suso, Henri-Pierre and Rysstad, Gunnar and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Towards a wireless sensor system for real-time H2O2 monitoring in aseptic food processes},
  series = {Physica status solidi (a)},
  volume    = {210},
  journal   = {Physica status solidi (a)},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201200920},
  pages     = {877 -- 883},
  year      = {2013},
  abstract  = {A wireless sensor system based on the industrial ZigBee standard for low-rate wireless networking was developed that enables real-time monitoring of gaseous H2O2 during the package sterilization in aseptic food processes. The sensor system consists of a remote unit connected to a calorimetric gas sensor, which was already established in former works, and an external base unit connected to a laptop computer. The remote unit was built up by an XBee radio frequency (RF) module for data communication and a programmable system-on-chip controller to read out the sensor signal and process the sensor data, whereas the base unit is a second XBee RF module. For the rapid H2O2 detection on various locations inside the package that has to be sterilized, a novel read-out strategy of the calorimetric gas sensor was established, wherein the sensor response is measured within the short sterilization time and correlated with the present H2O2 concentration. In an exemplary measurement application in an aseptic filling machinery, the suitability of the new, wireless sensor system was demonstrated, wherein the influence of the gas velocity on the H2O2 distribution inside a package was determined and verified with microbiological tests.},
  language  = {en}
}
@article{MiyamotoIchimuraWagneretal.2013,
  author    = {Miyamoto, Ko-ichiro and Ichimura, Hiroki and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Chemical imaging of the concentration profile of ion diffusion in a microfluidic channel},
  series = {Sensors and actuators. B: Chemical},
  volume    = {189},
  journal   = {Sensors and actuators. B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2013.04.057},
  pages     = {240 -- 245},
  year      = {2013},
  abstract  = {The chemical imaging sensor is a device to visualize the spatial distribution of chemical species based on the principle of LAPS (light-addressable potentiometric sensor), which is a field-effect chemical sensor based on semiconductor. In this study, the chemical imaging sensor has been applied to investigate the ion profile of laminar flows in a microfluidic channel. The chemical images (pH maps) were collected in a Y-shaped microfluidic channel while injecting HCl and NaCl solutions into two branches. From the chemical images, it was clearly observed that the injected solutions formed laminar flows in the channel. In addition, ion diffusion across the laminar flows was observed, and the diffusion coefficient could be derived by fitting the pH profiles to the Fick's equation.},
  language  = {en}
}
@article{BohrnMuchaWerneretal.2013,
  author    = {Bohrn, Ulrich and Mucha, Andreas and Werner, Frederik and Trattner, Barbara and B{\"a}cker, Matthias and Krumbe, Christoph and Schienle, Meinrad and St{\"u}tz, Evamaria and Schmitt-Landsiedel, Doris and Fleischer, Maximilian and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {A critical comparison of cell-based sensor systems for the detection of Cr (VI) in aquatic environment},
  series = {Sensors and actuators. B: Chemical},
  volume    = {Vol. 182},
  journal   = {Sensors and actuators. B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  pages     = {58 -- 65},
  year      = {2013},
  language  = {en}
}
@article{KowalskiMcElwaine2013,
  author    = {Kowalski, Julia and McElwaine, Jim N.},
  title     = {Shallow two-component gravity-driven flows with vertical variation},
  series = {Journal of Fluid Mechanics},
  volume    = {714},
  journal   = {Journal of Fluid Mechanics},
  publisher = {Cambridge Univ. Press},
  address   = {Cambridge},
  isbn      = {0022-1120},
  pages     = {434 -- 462},
  year      = {2013},
  language  = {en}
}
@article{WernerTakenagaTakietal.2013,
  author    = {Werner, Frederik and Takenaga, Shoko and Taki, Hidenori and Sawada, Kazuaki and Sch{\"o}ning, Michael Josef},
  title     = {Comparison of label-free ACh-imaging sensors based on CCD and LAPS},
  series = {Sensors and Actuators B: Chemical (2012)},
  volume    = {177},
  journal   = {Sensors and Actuators B: Chemical (2012)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0925-4005},
  pages     = {745 -- 752},
  year      = {2013},
  abstract  = {Semiconductor-based chemical imaging sensors, like the light-addressable potentiometric sensor (LAPS) or the pH-imaging sensor based on a charge-coupled device (CCD), are becoming a powerful tool for label-free imaging of biological phenomena. We have proposed a polyion-based enzymatic membrane to develop an acetylcholine (ACh) imaging sensor for neural cell-activity observations. In this study, a CCD-type ACh-imaging sensor and a LAPS-type ACh-imaging sensor were fabricated and the prospect of both sensors was clarified by making a comparison of their basic characteristics.},
  language  = {en}
}
@article{KirchnerOberlaenderSucoetal.2013,
  author    = {Kirchner, Patrick and Oberl{\"a}nder, Jan and Suco, Henri-Pierre and Rysstad, Gunnar and Sch{\"o}ning, Michael Josef},
  title     = {Monitoring the microbicidal effectiveness of gaseous hydrogen peroxide in sterilisation processes by means of a calorimetric gas sensor},
  series = {Food control},
  volume    = {31},
  journal   = {Food control},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-7135},
  doi       = {10.1016/j.foodcont.2012.11.048},
  pages     = {530 -- 538},
  year      = {2013},
  abstract  = {In the present work, a novel method for monitoring sterilisation processes with gaseous H2O2 in combination with heat activation by means of a specially designed calorimetric gas sensor was evaluated. Therefore, the sterilisation process was extensively studied by using test specimens inoculated with Bacillus atrophaeus spores in order to identify the most influencing process factors on its microbicidal effectiveness. Besides the contact time of the test specimens with gaseous H2O2 varied between 0.2 and 0.5 s, the present H2O2 concentration in a range from 0 to 8\% v/v (volume percent) had a strong influence on the microbicidal effectiveness, whereas the change of the vaporiser temperature, gas flow and humidity were almost negligible. Furthermore, a calorimetric H2O2 gas sensor was characterised in the sterilisation process with gaseous H2O2 in a wide range of parameter settings, wherein the measurement signal has shown a linear response against the H2O2 concentration with a sensitivity of 4.75 °C/(\% v/v). In a final step, a correlation model by matching the measurement signal of the gas sensor with the microbial inactivation kinetics was established that demonstrates its suitability as an efficient method for validating the microbicidal effectiveness of sterilisation processes with gaseous H2O2.},
  language  = {en}
}
@article{WernerWagnerYoshinobuetal.2013,
  author    = {Werner, Frederik and Wagner, Torsten and Yoshinobu, Tatsuo and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Frequency behaviour of light-addressable potentiometric sensors},
  series = {Physica Status Solidi (A)},
  volume    = {210},
  journal   = {Physica Status Solidi (A)},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-396X ; 0031-8965},
  doi       = {10.1002/pssa.201200929},
  pages     = {884 -- 891},
  year      = {2013},
  abstract  = {Light-addressable potentiometric sensors (LAPS) are semiconductor-based potentiometric sensors, with the advantage to detect the concentration of a chemical species in a liquid solution above the sensor surface in a spatially resolved manner. The addressing is achieved by a modulated and focused light source illuminating the semiconductor and generating a concentration-depending photocurrent. This work introduces a LAPS set-up that is able to monitor the electrical impedance in addition to the photocurrent. The impedance spectra of a LAPS structure, with and without illumination, as well as the frequency behaviour of the LAPS measurement are investigated. The measurements are supported by electrical equivalent circuits to explain the impedance and the LAPS-frequency behaviour. The work investigates the influence of different parameters on the frequency behaviour of the LAPS. Furthermore, the phase shift of the photocurrent, the influence of the surface potential as well as the changes of the sensor impedance will be discussed.},
  language  = {en}
}
@article{SchiffelsPinkenburgScheldenetal.2013,
  author    = {Schiffels, Johannes and Pinkenburg, Olaf and Schelden, Maximilian and Aboulnaga, El-Hussiny A. A. and Baumann, Marcus and Selmer, Thorsten},
  title     = {An innovative cloning platform enables large-scale production and maturation of an oxygen-tolerant [NiFe]-hydrogenase from cupriavidus necator in Escherichia coli},
  series = {PLOS one. 2013},
  journal   = {PLOS one. 2013},
  publisher = {Public Library of Science},
  address   = {San Francisco, California},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0068812},
  year      = {2013},
  language  = {en}
}
@article{MuellerBillmaierMueller2013,
  author    = {M{\"u}ller, Karsten and Billmaier, Karl and M{\"u}ller, Ernst A.},
  title     = {Abwasserw{\"a}rmenutzung},
  series = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5},
  journal   = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5},
  publisher = {Deutscher Fachverlag},
  address   = {Frankfurt am Main},
  issn      = {1438-5716},
  pages     = {24 -- 26},
  year      = {2013},
  language  = {de}
}
@article{Timme2013,
  author    = {Timme, Michael},
  title     = {Begrenzung von Mietb{\"u}rgschaften gem. \S 551 Abs. 4 BGB?},
  series = {Monatsschrift f{\"u}r deutsches Recht : MdR},
  volume    = {16},
  journal   = {Monatsschrift f{\"u}r deutsches Recht : MdR},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812 (Print) ; 2194-4202 (E-Journal)},
  pages     = {948 -- 949},
  year      = {2013},
  language  = {de}
}
@article{Timme2013,
  author    = {Timme, Michael},
  title     = {Begrenzung von Mietb{\"u}rgschaften gem. \S 551 Abs. 4 BGB?},
  series = {Der Miet-Rechts-Berater : MietRB},
  journal   = {Der Miet-Rechts-Berater : MietRB},
  number    = {8},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {1612-040X},
  pages     = {248 -- 249},
  year      = {2013},
  language  = {de}
}
@article{Mueller2013,
  author    = {M{\"u}ller, Thomas},
  title     = {Aufweichung der Gewaltenteilung und Demokratieverlust - Achtung vor dem Parlament. Darstellung einer Rechtsch{\"o}pfung der Exekutive im Umfeld des \S15 AStG},
  series = {Der Betrieb},
  journal   = {Der Betrieb},
  number    = {11},
  publisher = {Fachmedien Otto Schmidt},
  address   = {D{\"u}sseldorf},
  issn      = {0005-9935},
  pages     = {542 -- 548},
  year      = {2013},
  language  = {de}
}
@article{ItabashiKosakaMiyamotoetal.2013,
  author    = {Itabashi, Akinori and Kosaka, Naoki and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {High-speed chemical imaging system based on front-side-illuminated LAPS},
  series = {Sensors and actuators B: Chemical},
  volume    = {182},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077},
  doi       = {10.1016/j.snb.2013.03.016},
  pages     = {315 -- 321},
  year      = {2013},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the spatial distribution of specific ions on the sensing surface. The conventional chemical imaging system based on the light-addressable potentiometric sensor (LAPS), however, required a long time to obtain a chemical image, due to the slow mechanical scan of a single light beam. For high-speed imaging, a plurality of light beams modulated at different frequencies can be employed to measure the ion concentrations simultaneously at different locations on the sensor plate by frequency division multiplex (FDM). However, the conventional measurement geometry of back-side illumination limited the bandwidth of the modulation frequency required for FDM measurement, because of the low-pass filtering characteristics of carrier diffusion in the Si substrate. In this study, a high-speed chemical imaging system based on front-side-illuminated LAPS was developed, which achieved high-speed spatiotemporal recording of pH change at a rate of 70 frames per second.},
  language  = {en}
}
@article{Frings2013,
  author    = {Frings, Michael},
  title     = {{\"A}nderungen zur Haftung und Verg{\"u}tung im Vereins- und Stiftungsrecht},
  series = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  journal   = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {693 -- 699},
  year      = {2013},
  language  = {de}
}
@article{Frings2013,
  author    = {Frings, Michael},
  title     = {Begrenzung von vertraglichen H{\"o}chstfristen f{\"u}r Zahlungen und Abnahmen},
  series = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  journal   = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {49 -- 56},
  year      = {2013},
  language  = {de}
}
@article{KernBraun2013,
  author    = {Kern, Alexander and Braun, Christian},
  title     = {Neuerungen bei der Blitzschutznorm. Teil 2},
  series = {etz Elektrotechnik und Automation},
  volume    = {Bd. 134},
  journal   = {etz Elektrotechnik und Automation},
  number    = {H. 8},
  publisher = {VDE-Verlag},
  address   = {Wuppertal},
  issn      = {0170-1711},
  pages     = {66 -- 69},
  year      = {2013},
  language  = {de}
}
@article{ReisgenSchleserSchiebahn2013,
  author    = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander},
  title     = {Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 65},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 6},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {309 -- 313},
  year      = {2013},
  language  = {de}
}
@article{RamazaniLiMukherjeeetal.2013,
  author    = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe},
  title     = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding},
  series = {Computational materials science},
  volume    = {Vol. 68},
  journal   = {Computational materials science},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0801 (E-Book); 0927-0256 (Print)},
  pages     = {107 -- 116},
  year      = {2013},
  language  = {en}
}
@article{ReisertGeisslerFloerkeetal.2013,
  author    = {Reisert, Steffen and Geissler, Hanno and Fl{\"o}rke, Rudolf and Weiler, Christian and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Characterisation of aseptic sterilisation processes using an electronic nose},
  series = {International journal of nanotechnology},
  volume    = {Vol. 10},
  journal   = {International journal of nanotechnology},
  number    = {No. 5-7},
  publisher = {Inderscience Enterprises},
  address   = {Gen{\`e}ve},
  issn      = {1475-7435 (Print) 7141-8151 (Online)},
  pages     = {470 -- 484},
  year      = {2013},
  language  = {en}
}
@article{DoeringKendrickLawson2013,
  author    = {D{\"o}ring, Bernd and Kendrick, C. and Lawson, R. M.},
  title     = {Thermal capacity of composite floor slabs},
  series = {Energy and buildings},
  volume    = {Vol. 67},
  journal   = {Energy and buildings},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-6178 (E-Journal); 0378-7788 (Print)},
  pages     = {531 -- 539},
  year      = {2013},
  language  = {en}
}
@article{MiyamotoHirayamaWagneretal.2013,
  author    = {Miyamoto, Ko-ichiro and Hirayama, Yuji and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Visualization of enzymatic reaction in a microfluidic channel using chemical imaging sensor},
  series = {Electrochimica acta},
  journal   = {Electrochimica acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3859 (E-Journal); 0013-4686 (Print)},
  pages     = {Publ. online},
  year      = {2013},
  language  = {en}
}
@article{HeggerClassenSchaumannetal.2013,
  author    = {Hegger, Josef and Claßen, Martin and Schaumann, Peter and Sothmann, J{\"o}rg and Feldmann, Markus and D{\"o}ring, Bernd},
  title     = {Entwicklung einer integrierten Verbunddecke f{\"u}r nachhaltige Stahlbauten},
  series = {Stahlbau},
  volume    = {Vol. 82},
  journal   = {Stahlbau},
  number    = {Iss. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {11 -- 17},
  year      = {2013},
  language  = {de}
}
@article{SabitovaEbertLenzetal.2013,
  author    = {Sabitova, A. and Ebert, Ph. and Lenz, A. and Schaafhausen, S. and Ivanova, L. and D{\"a}hne, M. and Hoffmann, A. and Dunin-Borkowski, R. E. and F{\"o}rster, Arnold and Grandidier, B. and Eisele, H.},
  title     = {Intrinsic bandgap of cleaved ZnO(112¯0) surfaces},
  series = {Applied physics letters},
  volume    = {Vol. 102},
  journal   = {Applied physics letters},
  issn      = {1077-3118 (E-Journal); 0003-6951 (Print)},
  pages     = {021608},
  year      = {2013},
  language  = {en}
}
@article{JiminezGermanBehbahaniMiettinenetal.2013,
  author    = {Jiminez German, Salvador and Behbahani, Mehdi and Miettinen, Susanna and Grijpma, Dirk W. and Haimi, Suvi P.},
  title     = {Proliferation and differentiation of adipose stem cells towards smooth muscle cells on poly(trimethylene carbonate) membranes},
  series = {Macromolecular symposia},
  volume    = {Vol. 334},
  journal   = {Macromolecular symposia},
  number    = {Iss. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {0258-0322},
  pages     = {133 -- 142},
  year      = {2013},
  language  = {en}
}
@article{Mueller2013,
  author    = {M{\"u}ller, Thomas},
  title     = {Streitwertermittlung nach dem neuen \S 52 Abs. 3 S. 2 GKG - Auswirkungen auch bei der Besteuerung von Unternehmen},
  series = {Betriebs-Berater : BB},
  journal   = {Betriebs-Berater : BB},
  number    = {H. 42},
  publisher = {Beck},
  address   = {M{\"u}ller},
  issn      = {0947-0581 (E-Journal); 0340-7918 (Print)},
  pages     = {2519 -- 2521},
  year      = {2013},
  language  = {de}
}
@article{DuttaHartkopfFroederWitteetal.2013,
  author    = {Dutta, Suryendu and Hartkopf-Fr{\"o}der, Christoph and Witte, Karin and Brocke, Rainer and Mann, Ulrich},
  title     = {Molecular characterization of fossil palynomorphs by transmission micro-FTIR spectroscopy: implications for hydrocarbon source evaluation},
  series = {International journal of coal geology},
  volume    = {Vol. 115},
  journal   = {International journal of coal geology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7840 (E-Journal); 0166-5162 (Print)},
  pages     = {13 -- 23},
  year      = {2013},
  language  = {en}
}
@article{MartinezJakobTuetal.2013,
  author    = {Martinez, Ronny and Jakob, Felix and Tu, Ran and Siegert, Petra and Maurer, Karl-Heinz and Schwaneberg, Ulrich},
  title     = {Increasing activity and thermal resistance of Bacillus gibsonii alkaline protease (BgAP) by directed evolution},
  series = {Biotechnology and bioengineering},
  volume    = {Vol. 110},
  journal   = {Biotechnology and bioengineering},
  number    = {Iss. 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1097-0290 (E-Journal); 0006-3592 (Print); 0368-1467 (Print)},
  pages     = {711 -- 720},
  year      = {2013},
  language  = {en}
}
@article{JakobMartinezMandaweetal.2013,
  author    = {Jakob, Felix and Martinez, Ronny and Mandawe, John and Hellmuth, Hendrik and Siegert, Petra and Maurer, Karl-Heinz and Schwaneberg, Ulrich},
  title     = {Surface charge engineering of a Bacillus gibsonii subtilisin protease},
  series = {Applied microbiology and biotechnology},
  volume    = {Vol. 97},
  journal   = {Applied microbiology and biotechnology},
  number    = {Iss. 15},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0614 (E-Journal); 0171-1741 (Print); 0175-7598 (Print); 0340-2118 (Print)},
  pages     = {6793 -- 6802},
  year      = {2013},
  language  = {en}
}
@article{VieiradaSilvaSchwarzerHoffschmidtetal.2013,
  author    = {Vieira da Silva, Maria Eugenia and Schwarzer, Klemens and Hoffschmidt, Bernhard and Pinheiro Rodrigues, Frederico and Schwarzer, Tarik and Costa Rocha, Paulo Alexandre},
  title     = {Mass transfer correlation for evaporation-condensation thermal process in the range of 70 °C-95 °C},
  series = {Renewable energy},
  volume    = {Vol. 53},
  journal   = {Renewable energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0682 (E-Journal); 0960-1481 (Print)},
  pages     = {174 -- 179},
  year      = {2013},
  language  = {en}
}
@article{BenzelUtzerath2013,
  author    = {Benzel, Ute and Utzerath, Meike},
  title     = {Latente Steuern im Zusammenhang mit Beteiligungen an Tochterunternehmen im IFRS-Konzernabschluss},
  series = {Internationale Steuer-Rundschau : ISR ; Zeitschrift f{\"u}r internationales Steuerrecht},
  journal   = {Internationale Steuer-Rundschau : ISR ; Zeitschrift f{\"u}r internationales Steuerrecht},
  number    = {4},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {2194-539X},
  pages     = {143 -- 148},
  year      = {2013},
  language  = {de}
}
@article{BergAngererMartinellietal.2013,
  author    = {Berg, Milena and Angerer, Anita and Martinelli, Walter and Hammer, Stephan and Mottaghy, Darius},
  title     = {Erkundung des geothermischen Potenzials eines ehemaligen Untertagebergbaus},
  series = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  volume    = {64},
  journal   = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  number    = {6},
  pages     = {46 -- 52},
  year      = {2013},
  language  = {de}
}
@article{KuertenMottaghyZiegler2013,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {W{\"a}rme{\"u}bergangswiderstand bei fl{\"a}chigen thermo-aktiven Bauteilen am Beispiel thermo-aktiver Abdichtungselemente},
  series = {Bautechnik},
  volume    = {90},
  journal   = {Bautechnik},
  number    = {7},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-0999},
  doi       = {10.1002/bate.201300035},
  pages     = {387 -- 394},
  year      = {2013},
  language  = {de}
}
@article{MottaghySchwambornRath2013,
  author    = {Mottaghy, Darius and Schwamborn, G. and Rath, V.},
  title     = {Past climate changes and permafrost depth at the Lake El'gygytgyn site: implications from data and thermal modeling},
  series = {Climate of the Past},
  volume    = {9},
  journal   = {Climate of the Past},
  number    = {1},
  publisher = {Copernicus},
  address   = {Katlenburg-Lindau},
  issn      = {1814-9332},
  doi       = {10.5194/cp-9-119-2013},
  pages     = {119 -- 133},
  year      = {2013},
  language  = {en}
}
@article{VogtIwanowskiStrahserMarquartetal.2013,
  author    = {Vogt, Christian and Iwanowski-Strahser, Katha and Marquart, Gabriele and Arnold, Juliane and Mottaghy, Darius and Pechnig, Renate and Gnjezda, Daniel and Clauser, Christoph},
  title     = {Modeling contribution to risk assessment of thermal production power for geothermal reservoirs},
  series = {Renewable Energy},
  volume    = {53},
  journal   = {Renewable Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0960-1481},
  doi       = {10.1016/j.renene.2012.11.026},
  pages     = {230 -- 241},
  year      = {2013},
  language  = {en}
}
@article{Lind2013,
  author    = {Lind, Thorsten Patric},
  title     = {Zur Anwendung der Gesch{\"a}ftschancenlehre auf den gesch{\"a}ftsf{\"u}hrenden Gesellschafter einer Gesellschaft b{\"u}rgerlichen Rechts : BGH, Urteil vom 04.12.2012 - II ZR 159/10 : Anmerkung},
  series = {LMK : kommentierte BGH-Rechtsprechung ; in Zsarb. mit der Neuen Juristischen Wochenschrift / Lindenmaier-M{\"o}hring},
  journal   = {LMK : kommentierte BGH-Rechtsprechung ; in Zsarb. mit der Neuen Juristischen Wochenschrift / Lindenmaier-M{\"o}hring},
  number    = {Ausg. 5},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {1611-1095},
  pages     = {345471},
  year      = {2013},
  language  = {de}
}