@article{WolfLuczak1999,
  author    = {Wolf, Martin R. and Luczak, Holger},
  title     = {Computer Supported Communication and Cooperation - Making Information Aware / Luczak, H. ; Wolf, M.},
  series = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  journal   = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ},
  pages     = {298 -- 302},
  year      = {1999},
  language  = {en}
}
@inproceedings{NikolovskiLimpertNessauetal.2023,
  author    = {Nikolovski, Gjorgji and Limpert, Nicolas and Nessau, Hendrik and Reke, Michael and Ferrein, Alexander},
  title     = {Model-predictive control with parallelised optimisation for the navigation of autonomous mining vehicles},
  series = {2023 IEEE Intelligent Vehicles Symposium (IV)},
  booktitle = {2023 IEEE Intelligent Vehicles Symposium (IV)},
  publisher = {IEEE},
  isbn      = {979-8-3503-4691-6 (Online)},
  doi       = {10.1109/IV55152.2023.10186806},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {The work in modern open-pit and underground mines requires the transportation of large amounts of resources between fixed points. The navigation to these fixed points is a repetitive task that can be automated. The challenge in automating the navigation of vehicles commonly used in mines is the systemic properties of such vehicles. Many mining vehicles, such as the one we have used in the research for this paper, use steering systems with an articulated joint bending the vehicle's drive axis to change its course and a hydraulic drive system to actuate axial drive components or the movements of tippers if available. To address the difficulties of controlling such a vehicle, we present a model-predictive approach for controlling the vehicle. While the control optimisation based on a parallel error minimisation of the predicted state has already been established in the past, we provide insight into the design and implementation of an MPC for an articulated mining vehicle and show the results of real-world experiments in an open-pit mine environment.},
  language  = {en}
}
@article{FrauenrathNiendorfKob2008,
  author    = {Frauenrath, Tobias and Niendorf, Thoralf and Kob, Malte},
  title     = {Acoustic method for synchronization of Magnetic Resonance Imaging (MRI)},
  series = {Acta Acustica},
  volume    = {94},
  journal   = {Acta Acustica},
  number    = {1},
  publisher = {Hirzel},
  address   = {Stuttgart},
  issn      = {1861-9959},
  doi       = {10.3813/AAA.918017},
  pages     = {148 -- 155},
  year      = {2008},
  abstract  = {Magnetic Resonance Imaging (MRI) of moving organs requires synchronization with physiological motion or flow, which dictate the viable window for data acquisition. To meet this challenge, this study proposes an acoustic gating device (ACG) that employs acquisition and processing of acoustic signals for synchronization while providing MRI compatibility, immunity to interferences with electro-magnetic and acoustic fields and suitability for MRI at high magnetic field strengths. The applicability and robustness of the acoustic gating approach is examined in a pilot study, where it substitutes conventional ECG-gating for cardiovascular MR. The merits and limitations of the ACG approach are discussed. Implications for MR imaging in the presence of physiological motion are considered including synchronization with other structure- or motion borne sounds.},
  language  = {en}
}
@article{FerreinDyllaLakemeyeretal.2008,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard and Murray, Jan},
  title     = {Approaching a formal soccer theory from behaviour specifications in robotic soccer / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; R{\"o}fer, Thomas ; Schiffer, Stefan ; Stolzenburg, Frieder ; Visser, Ubbo ; Wagner, Tho},
  series = {Computers in sport / editors: P Dabnichki},
  journal   = {Computers in sport / editors: P Dabnichki},
  publisher = {WIT Press},
  address   = {Southampton},
  isbn      = {978-1-8456-4064-4},
  pages     = {161 -- 185},
  year      = {2008},
  language  = {en}
}
@article{BooysenRiegerFerrein2011,
  author    = {Booysen, Tracy and Rieger, Michael and Ferrein, Alexander},
  title     = {Towards inexpensive robots for science \& technology teaching and education in Africa},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-61284-992-8},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@inproceedings{FerreinMaierMuehlbacheretal.2015,
  author    = {Ferrein, Alexander and Maier, Christopher and M{\"u}hlbacher, Clemens and Niemueller, Tim and Steinbauer, Gerald and Vassos, Stravros},
  title     = {Controlling Logistics Robots with the Action-based Language YAGI},
  series = {Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing},
  booktitle = {Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing},
  year      = {2015},
  language  = {en}
}
@inproceedings{WolfLenz2015,
  author    = {Wolf, Martin R. and Lenz, Laura L.},
  title     = {The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)},
  series = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  booktitle = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  publisher = {IEEE [u.a.]},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-4823-9},
  doi       = {10.1109/SeGAH.2014.7067089},
  pages     = {135 -- 142},
  year      = {2015},
  language  = {en}
}
@article{DieringerRenzLindeletal.2011,
  author    = {Dieringer, Matthias A. and Renz, Wolfgang and Lindel, Tomasz D. and Seifert, Frank and Frauenrath, Tobias and von Knobelsdorf-Brenkenhoff, Florian and Waiczies, Helmar and Hoffmann, Werner and Rieger, Jan and Pfeiffer, Harald and Ittermann, Bernd and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Design and application of a four-channel transmit/receive surface coil for functional cardiac imaging at 7T},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {33},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {3},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.22451},
  pages     = {736 -- 741},
  year      = {2011},
  abstract  = {Purpose To design and evaluate a four-channel cardiac transceiver coil array for functional cardiac imaging at 7T. Materials and Methods A four-element cardiac transceiver surface coil array was developed with two rectangular loops mounted on an anterior former and two rectangular loops on a posterior former. specific absorption rate (SAR) simulations were performed and a Burn:x-wiley:10531807:media:JMRI22451:tex2gif-stack-1 calibration method was applied prior to obtain 2D FLASH CINE (mSENSE, R = 2) images from nine healthy volunteers with a spatial resolution of up to 1 × 1 × 2.5 mm3. Results Tuning and matching was found to be better than 10 dB for all subjects. The decoupling (S21) was measured to be >18 dB between neighboring loops, >20 dB for opposite loops, and >30 dB for other loop combinations. SAR values were well within the limits provided by the IEC. Imaging provided clinically acceptable signal homogeneity with an excellent blood-myocardium contrast applying the Burn:x-wiley:10531807:media:JMRI22451:tex2gif-stack-2 calibration approach. Conclusion A four-channel cardiac transceiver coil array for 7T was built, allowing for cardiac imaging with clinically acceptable signal homogeneity and an excellent blood-myocardium contrast. Minor anatomic structures, such as pericardium, mitral, and tricuspid valves and their apparatus, as well as trabeculae, were accurately delineated.},
  language  = {en}
}
@article{GspandlPillReipetal.2011,
  author    = {Gspandl, Stephan and Pill, Ingo and Reip, Michael and Steinbauer, Gerald and Ferrein, Alexander},
  title     = {Belief Management for High-Level Robot Programs},
  series = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  journal   = {Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh},
  pages     = {900 -- 905},
  year      = {2011},
  language  = {en}
}
@article{Ferrein2008,
  author    = {Ferrein, Alexander},
  title     = {Towards applying soccer moves in the RoboCup Standard Platform League},
  series = {{\"O}GAI-Journal},
  volume    = {Bd. 27},
  journal   = {{\"O}GAI-Journal},
  number    = {H. 3},
  organization    = {{\"O}sterreichische Gesellschaft f{\"u}r Artificial Intelligence},
  issn      = {0254-4326},
  pages     = {4 -- 9},
  year      = {2008},
  language  = {en}
}
@inproceedings{FerreinMeessenLimpertetal.2021,
  author    = {Ferrein, Alexander and Meeßen, Marcus and Limpert, Nicolas and Schiffer, Stefan},
  title     = {Compiling ROS schooling curricula via contentual taxonomies},
  series = {Robotics in Education},
  booktitle = {Robotics in Education},
  editor    = {Lepuschitz, Wilfried},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-67411-3},
  doi       = {10.1007/978-3-030-67411-3_5},
  pages     = {49 -- 60},
  year      = {2021},
  abstract  = {The Robot Operating System (ROS) is the current de-facto standard in robot middlewares. The steadily increasing size of the user base results in a greater demand for training as well. User groups range from students in academia to industry professionals with a broad spectrum of developers in between. To deliver high quality training and education to any of these audiences, educators need to tailor individual curricula for any such training. In this paper, we present an approach to ease compiling curricula for ROS trainings based on a taxonomy of the teaching contents. The instructor can select a set of dedicated learning units and the system will automatically compile the teaching material based on the dependencies of the units selected and a set of parameters for a particular training. We walk through an example training to illustrate our work.},
  language  = {en}
}
@inproceedings{HofmannMatareSchifferetal.2018,
  author    = {Hofmann, Till and Matar{\´e}, Victor and Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Constraint-based online transformation of abstract plans into executable robot actions},
  series = {Proceedings of the 2018 AAAI Spring Symposium on Integrating Representation, Reasoning, Learning, and Execution for Goal Directed Autonomy},
  booktitle = {Proceedings of the 2018 AAAI Spring Symposium on Integrating Representation, Reasoning, Learning, and Execution for Goal Directed Autonomy},
  pages     = {549 -- 553},
  year      = {2018},
  language  = {en}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {Design considerations of the duo fugam dual rotor UAV},
  series = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  booktitle = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  isbn      = {978-1-5386-2314-5},
  doi       = {10.1109/RoboMech.2017.8261115},
  pages     = {7 -- 13},
  year      = {2017},
  language  = {en}
}
@inproceedings{NiemuellerReuterFerreinetal.2016,
  author    = {Niemueller, Tim and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Evaluation of the RoboCup Logistics League and Derived Criteria for Future Competitions},
  series = {RoboCup 2015: Robot World Cup XIX},
  booktitle = {RoboCup 2015: Robot World Cup XIX},
  editor    = {Almeida, Luis},
  publisher = {Springer International Publishing},
  address   = {Cham},
  isbn      = {978-3-319-29339-4},
  doi       = {10.1007/978-3-319-29339-4_3},
  pages     = {31 -- 43},
  year      = {2016},
  language  = {en}
}
@inproceedings{NiemuellerNeumannHenkeetal.2017,
  author    = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Improvements for a robust production in the RoboCup logistics league 2016},
  series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_49},
  pages     = {589 -- 600},
  year      = {2017},
  language  = {en}
}
@inproceedings{HofmannLimpertMatareetal.2019,
  author    = {Hofmann, Till and Limpert, Nicolas and Matar{\´e}, Victor and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Winning the RoboCup Logistics League with Fast Navigation, Precise Manipulation, and Robust Goal Reasoning},
  series = {RoboCup 2019: Robot World Cup XXIII. RoboCup},
  booktitle = {RoboCup 2019: Robot World Cup XXIII. RoboCup},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-35699-6},
  doi       = {10.1007/978-3-030-35699-6_41},
  pages     = {504 -- 516},
  year      = {2019},
  language  = {en}
}
@inproceedings{FingerKhalsaKreyeretal.2019,
  author    = {Finger, Felix and Khalsa, R. and Kreyer, J{\"o}rg and Mayntz, Joscha and Braun, Carsten and Dahmann, Peter and Esch, Thomas and Kemper, Hans and Schmitz, O. and Bragard, Michael},
  title     = {An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft},
  series = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.},
  language  = {en}
}
@inproceedings{GrundAltherr2023,
  author    = {Grund, Raphael M. and Altherr, Lena},
  title     = {Development of an open source energy disaggregation tool for the home automation platform Home Assistant},
  series = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  booktitle = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-01-6},
  doi       = {10.33968/2023.02},
  pages     = {11 -- 20},
  year      = {2023},
  abstract  = {In order to reduce energy consumption of homes, it is important to make transparent which devices consume how much energy. However, power consumption is often only monitored aggregated at the house energy meter. Disaggregating this power consumption into the contributions of individual devices can be achieved using Machine Learning. Our work aims at making state of the art disaggregation algorithms accessibe for users of the open source home automation platform Home Assistant.},
  language  = {en}
}
@misc{BragardHueningKowalewski2023,
  author    = {Bragard, Michael and H{\"u}ning, Felix and Kowalewski, Paul},
  title     = {Vorrichtung zur Relativlagenbestimmung [Offenlegungschrift]},
  year      = {2023},
  abstract  = {Die Erfindung betrifft eine Vorrichtung zur Bestimmung einer Relativlage zwischen einem feststehenden Teil und einem zu demselben in eine Bewegungsrichtung bewegbaren beweglichen Teil, wobei der feststehende Teil mit einem Wiegandsensor versehen ist, wobei der Wiegandsensor zwischen zwei gegenpolig zueinander ausgebildeten Permanentmagneten angeordnet ist und dass der bewegliche Teil eine Mehrzahl von beabstandet zueinander angeordneten Magnetisierungsstegen aus einem magnetisch leitenden Material aufweist, die in der Bewegungsrichtung zumindest eine gleich große Erstreckung aufweisen wie der Permanentmagnet, dass ein Abstand zwischen benachbarten Magnetisierungsstegen derart gew{\"a}hlt ist, dass in einer ersten Relativlage ein erster Permanentmagnet von einem der Magnetisierungsstege {\"u}berdeckt ist und ein zweiter Permanentmagnet nicht von einem der Magnetisierungsstege {\"u}berdeckt ist.},
  language  = {de}
}
@inproceedings{WittigRuettersBragard2024,
  author    = {Wittig, M. and R{\"u}tters, Ren{\´e} and Bragard, Michael},
  title     = {Application of RL in control systems using the example of a rotatory inverted pendulum},
  series = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  booktitle = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-02-3},
  doi       = {10.33968/2024.53},
  pages     = {241 -- 248},
  year      = {2024},
  abstract  = {In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.},
  language  = {en}
}
@misc{Huening2024,
  author    = {H{\"u}ning, Felix},
  title     = {Positionssensorvorrichtung},
  year      = {2024},
  abstract  = {Die Erfindung betrifft eine Positionssensorvorrichtung zur Bestimmung einer Absolutposition eines beweglichen ersten Teils relativ zu einem ortsfesten zweiten Teil mit einem mit dem beweglichen ersten Teil gekoppelter Codek{\"o}rper, der dazu eingerichtet ist, eine Codespur mit einer Mehrzahl von in Spurrichtung aufeinanderfolgenden Codeelementen zu enthalten zur Bildung eines Codewortes, mit einer magnetischen Detektionseinrichtung zur Detektion der Codespur, wobei die Detektionseinrichtung zum einen an dem Codek{\"o}rper befestigte und entlang der Spurrichtung in einem solchen Abstand gegenpolig zueinander angeordnete Permanentmagneten aufweist, dass der Abstand mit einer vorgegebenen L{\"a}nge der jeweiligen Codeelemente {\"u}bereinstimmt, und zum anderen eine Anzahl von ortsfest und quer zu dem Codek{\"o}rper versetzt angeordnete Wiegandsensoren aufweist, wobei der Abstand des Wiegandsensors zu einer Erstreckungsebene der Permanentmagneten derart gew{\"a}hlt ist, dass bei {\"U}berdeckung des Wiegandsensors durch den Permanentmagneten ein Wiegandpuls in dem Wiegandsensor induziert wird.},
  language  = {de}
}
@article{SchoppRohrbachLangeretal.2024,
  author    = {Schopp, Christoph and Rohrbach, Felix and Langer, Luc and Heuermann, Holger},
  title     = {Detection of welding wire length by active S11 measurement},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {0093-3813 (Print)},
  doi       = {10.1109/TPS.2024.3356659},
  pages     = {1 -- 6},
  year      = {2024},
  abstract  = {A novel method to determine the extruded length of a metallic wire for a directed energy deposition (DED) process using a microwave (MW) plasma jet with a straight-through wire feed is presented. The method is based on the relative comparison of the measured frequency response obtained by the large-signal scattering parameter (Hot-S) technique. In the practical working range, repeatability of less than 6\% for a nonactive plasma and 9\% for the active plasma state is found. Measurements are conducted with a focus on a simple solution to decrease the processing time and reduce the integration time of the process into the existing hardware. It is shown that monitoring a single frequency for magnitude and phase changes is sufficient to achieve good accuracy. A combination of different measurement values to determine the length is possible. The applicability to different diameter of the same material is shown as well as a contact detection of the wire and metallic substrate.},
  language  = {en}
}
@incollection{SchneiderWisselinkCzarneckietal.2024,
  author    = {Schneider, Dominik and Wisselink, Frank and Czarnecki, Christian and N{\"o}lle, Nikolai},
  title     = {Benefits and framework conditions for information-driven business models concerning the Internet of Things},
  series = {Digitalization in companies},
  booktitle = {Digitalization in companies},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-658-39093-8 (Print)},
  doi       = {10.1007/978-3-658-39094-5_5},
  pages     = {59 -- 75},
  year      = {2024},
  abstract  = {In the context of the increasing digitalization, the Internet of Things (IoT) is seen as a technological driver through which completely new business models can emerge in the interaction of different players. Identified key players include traditional industrial companies, municipalities and telecommunications companies. The latter, by providing connectivity, ensure that small devices with tiny batteries can be connected almost anywhere and directly to the Internet. There are already many IoT use cases on the market that provide simplification for end users, such as Philips Hue Tap. In addition to business models based on connectivity, there is great potential for information-driven business models that can support or enhance existing business models. One example is the IoT use case Park and Joy, which uses sensors to connect parking spaces and inform drivers about available parking spaces in real time. Information-driven business models can be based on data generated in IoT use cases. For example, a telecommunications company can add value by deriving more decision-relevant information - called insights - from data that is used to increase decision agility. In addition, insights can be monetized. The monetization of insights can only be sustainable, if careful attention is taken and frameworks are considered. In this chapter, the concept of information-driven business models is explained and illustrated with the concrete use case Park and Joy. In addition, the benefits, risks and framework conditions are discussed.},
  language  = {en}
}
@article{FerreinMaraisPotgieteretal.2011,
  author    = {Ferrein, Alexander and Marais, Stephen and Potgieter, Anet and Steinbauer, Gerald},
  title     = {RoboCup Junior: A vehicle for S\&T education in Africa?},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-61284-992-8},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@article{FerreinSteinbauer2016,
  author    = {Ferrein, Alexander and Steinbauer, Gerald},
  title     = {20 Years of RoboCup - A Subjective Retrospection},
  series = {KI - K{\"u}nstliche Intelligenz},
  volume    = {30},
  journal   = {KI - K{\"u}nstliche Intelligenz},
  number    = {3},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-016-0449-5},
  pages     = {225 -- 232},
  year      = {2016},
  abstract  = {This summer, RoboCup competitions were held for the 20th time in Leipzig, Germany. It was the second time that RoboCup took place in Germany, 10 years after the 2006 RoboCup in Bremen. In this article, we give an overview on the latest developments of RoboCup and what happened in the different leagues over the last decade. With its 20th edition, RoboCup clearly is a success story and a role model for robotics competitions. From our personal view point, we acknowledge this by giving a retrospection about what makes RoboCup such a success.},
  language  = {en}
}
@article{FerreinSteinbauerMcPhillipsetal.2009,
  author    = {Ferrein, Alexander and Steinbauer, Gerald and McPhillips, Graeme and Niem{\"u}ller, Tim and Potgieter, Anet},
  title     = {Team Zadeat 2009 : team report},
  volume    = {6},
  pages     = {1},
  year      = {2009},
  language  = {en}
}
@misc{LindelGreiserWaxmanetal.2012,
  author    = {Lindel, Tomasz Dawid and Greiser, Andreas and Waxman, Patrick and Dietterle, Martin and Seifert, Frank and Fontius, Ulrich and Renz, Wolfgang and Dieringer, Matthias A. and Frauenrath, Tobias and Schulz-Menger, Jeanette and Niendorf, Thoralf and Ittermann, Bernd},
  title     = {Cardiac CINE MRI at 7 T using a transmit array},
  series = {2012 ISMRM Annual Meeting Proceedings},
  journal   = {2012 ISMRM Annual Meeting Proceedings},
  issn      = {1545-4428},
  year      = {2012},
  abstract  = {With its need for high SNR and short acquisition times, Cardiac MRI (CMR) is an intriguing target application for ultrahigh field MRI. Due to the sheer size of the upper torso, however, the known RF issues of 7T MRI are also most prominent in CMR. Recent years brought substantial progress but the full potential of the ultrahigh field for CMR is yet to be exploited. Parallel transmission (pTx) is a promising approach in this context and several groups have already reported B1 shimming for 7T CMR. In such a static pTx application amplitudes and phases of all Tx channels are adjusted individually but otherwise imaging techniques established in current clinical practice 1.5 T and 3 T are applied. More advanced forms of pTx as spatially selective excitation (SSE) using Transmit SENSE promise additional benefits like faster imaging with reduced fields of view or improved SAR control. SSE requires the full dynamic capabilities of pTx, however, and for the majority of today's implemented pTx hardware the internal synchronization of the Tx array does not easily permit external triggering as needed for CMR. Here we report a software solution to this problem and demonstrate the feasibility of CINE CMR at 7 T using a Tx array.},
  language  = {en}
}
@article{LeingartnerMaurerFerreinetal.2016,
  author    = {Leingartner, Max and Maurer, Johannes and Ferrein, Alexander and Steinbauer, Gerald},
  title     = {Evaluation of Sensors and Mapping Approaches for Disasters in Tunnels},
  series = {Journal of Field Robotics},
  volume    = {33},
  journal   = {Journal of Field Robotics},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1556-4967},
  doi       = {10.1002/rob.21611},
  pages     = {1037 -- 1057},
  year      = {2016},
  abstract  = {Ground or aerial robots equipped with advanced sensing technologies, such as three-dimensional laser scanners and advanced mapping algorithms, are deemed useful as a supporting technology for first responders. A great deal of excellent research in the field exists, but practical applications at real disaster sites are scarce. Many projects concentrate on equipping robots with advanced capabilities, such as autonomous exploration or object manipulation. In spite of this, realistic application areas for such robots are limited to teleoperated reconnaissance or search. In this paper, we investigate how well state-of-the-art and off-the-shelf components and algorithms are suited for reconnaissance in current disaster-relief scenarios. The basic idea is to make use of some of the most common sensors and deploy some widely used algorithms in a disaster situation, and to evaluate how well the components work for these scenarios. We acquired the sensor data from two field experiments, one from a disaster-relief operation in a motorway tunnel, and one from a mapping experiment in a partly closed down motorway tunnel. Based on these data, which we make publicly available, we evaluate state-of-the-art and off-the-shelf mapping approaches. In our analysis, we integrate opinions and replies from first responders as well as from some algorithm developers on the usefulness of the data and the limitations of the deployed approaches, respectively. We discuss the lessons we learned during the two missions. These lessons are interesting for the community working in similar areas of urban search and rescue, particularly reconnaissance and search.},
  language  = {en}
}
@inproceedings{SchifferFerreinLakemeyer2011,
  author    = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Fuzzy representations and control for domestic service robots in Golog},
  series = {Intelligent robotics and applications : 4th International conference, ICIRA 2011, Aachen, Germany, December 6-8, 2011, proceedings, part I. (Lecture notes in computer science ; 7102)},
  booktitle = {Intelligent robotics and applications : 4th International conference, ICIRA 2011, Aachen, Germany, December 6-8, 2011, proceedings, part I. (Lecture notes in computer science ; 7102)},
  isbn      = {978-3-642-25486-4},
  pages     = {241 -- 250},
  year      = {2011},
  language  = {en}
}
@article{Ritz2000,
  author    = {Ritz, Thomas},
  title     = {Information Channels},
  series = {Information Technology. Nr. 52 (2000), H. 08. Mai 2000},
  journal   = {Information Technology. Nr. 52 (2000), H. 08. Mai 2000},
  pages     = {15 -- 15},
  year      = {2000},
  language  = {en}
}
@techreport{ThomaLaarmannMerkensetal.2020,
  author    = {Thoma, Andreas and Laarmann, Lukas and Merkens, Torsten and Franzke, Till and M{\"o}hren, Felix and Buttermann, Lilly and van der Weem, Dirk and Fischer, Maximilian and Misch, Philipp and B{\"o}hme, Mirijam and R{\"o}th, Thilo and Hebel, Christoph and Ritz, Thomas and Franke, Marina and Braun, Carsten},
  title     = {Entwicklung eines intermodalen Mobilit{\"a}tskonzeptes f{\"u}r die Pilotregion NRW/Rhein-Maas Euregio und Schaffung voller Kundenakzeptanz durch Transfer von Standards aus dem PKW-Bereich auf ein Flugtaxi : Schlussbericht : Projektakronym: SkyCab (Kategorie B) : Laufzeit in Monaten: 6 : Hauptthema: Kategorie B: Innovative Ideen mit Bezug zu UAS/Flugtaxis},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {97 Seiten},
  year      = {2020},
  language  = {de}
}
@article{RitzStender2002,
  author    = {Ritz, Thomas and Stender, Michael},
  title     = {Mobilit{\"a}t meistern - Integration von mobilen Akteuren durch ad-hoc Integrationskonzepte},
  series = {Wireless Technologien nutzbar machen: UMTS und alternative Netzwerktechnologien f{\"u}r innovative mobile Anwendungen in Vertrieb und Service},
  journal   = {Wireless Technologien nutzbar machen: UMTS und alternative Netzwerktechnologien f{\"u}r innovative mobile Anwendungen in Vertrieb und Service},
  year      = {2002},
  language  = {de}
}
@article{RensVarzinczakMeyeretal.2010,
  author    = {Rens, Gavin and Varzinczak, Ivan and Meyer, Thomas and Ferrein, Alexander},
  title     = {A Logic for Reasoning about Actions and Explicit Observations},
  series = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  journal   = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-17431-5},
  pages     = {395 -- 404},
  year      = {2010},
  language  = {en}
}
@article{HeuermannSchiek1995,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {The double-LNN Calibration technique for scattering parameter measurements of microstrip devices},
  series = {Conference proceedings},
  journal   = {Conference proceedings},
  publisher = {NEXUS House},
  address   = {Kent},
  pages     = {343 -- 347},
  year      = {1995},
  language  = {en}
}
@article{RitzStender2004,
  author    = {Ritz, Thomas and Stender, Michael},
  title     = {Ad-hoc Anwendungsintegration mit mobilen CRM-Systement},
  series = {Electronic Business : Innovationen, Anwendungen und Technologien},
  journal   = {Electronic Business : Innovationen, Anwendungen und Technologien},
  editor    = {Weisbecker, Anette},
  publisher = {Fraunhofer-IRB-Verl.},
  address   = {Stuttgart},
  isbn      = {3-8167-6621-8},
  pages     = {92 -- 97},
  year      = {2004},
  language  = {de}
}
@inproceedings{DammRitzStrauch2010,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Benutzerzentrierte Anforderungsanalyse f{\"u}r die Produktlinien-Entwicklung mobiler Unternehmenssoftware},
  series = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  booktitle = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  editor    = {Klink, Stefan},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-266-6},
  pages     = {117 -- 130},
  year      = {2010},
  language  = {de}
}
@article{FerreinNiemuellerSteinbauer2010,
  author    = {Ferrein, Alexander and Niem{\"u}ller, Tim and Steinbauer, Gerald},
  title     = {Team Zadeat 2010 : application for participation},
  pages     = {5 Seiten},
  year      = {2010},
  language  = {en}
}
@article{Heuermann1996,
  author    = {Heuermann, Holger},
  title     = {Sure Methods of On-Wafer Scattering Parameter Measurements with Self-Calibration Procedures},
  pages     = {136 -- 145},
  year      = {1996},
  language  = {en}
}
@book{WolfFoltzKillich2000,
  author    = {Wolf, Martin R. and Foltz, Christian and Killich, S.},
  title     = {K3 User Guide},
  publisher = {RWTH},
  address   = {Aachen},
  pages     = {1 -- 13},
  year      = {2000},
  language  = {en}
}
@article{HoffmannRohrbachUhletal.2022,
  author    = {Hoffmann, Andreas and Rohrbach, Felix and Uhl, Matthias and Ceblin, Maximilian and Bauer, Thomas and Mallah, Marcel and Jacob, Timo and Heuermann, Holger and Kuehne, Alexander J. C.},
  title     = {Atmospheric pressure plasma-jet treatment of polyacrylonitrile-nonwovens—Stabilization and roll-to-roll processing},
  series = {Journal of Applied Polymer Science},
  volume    = {139},
  journal   = {Journal of Applied Polymer Science},
  number    = {37},
  publisher = {Wiley},
  issn      = {0021-8995 (Print)},
  doi       = {10.1002/app.52887},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {Carbon nanofiber nonwovens represent a powerful class of materials with prospective application in filtration technology or as electrodes with high surface area in batteries, fuel cells, and supercapacitors. While new precursor-to-carbon conversion processes have been explored to overcome productivity restrictions for carbon fiber tows, alternatives for the two-step thermal conversion of polyacrylonitrile precursors into carbon fiber nonwovens are absent. In this work, we develop a continuous roll-to-roll stabilization process using an atmospheric pressure microwave plasma jet. We explore the influence of various plasma-jet parameters on the morphology of the nonwoven and compare the stabilized nonwoven to thermally stabilized samples using scanning electron microscopy, differential scanning calorimetry, and infrared spectroscopy. We show that stabilization with a non-equilibrium plasma-jet can be twice as productive as the conventional thermal stabilization in a convection furnace, while producing electrodes of comparable electrochemical performance.},
  language  = {en}
}
@inproceedings{SchoppHeuermann2013,
  author    = {Schopp, Christoph and Heuermann, Holger},
  title     = {Electrodeless low pressure lamp with bi-static matching at 2.45 GHz},
  series = {2013 European Microwave Conference (EuMC) , Nuremberg},
  booktitle = {2013 European Microwave Conference (EuMC) , Nuremberg},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-0264-4},
  pages     = {881 -- 884},
  year      = {2013},
  language  = {en}
}
@article{Ferrein2004,
  author    = {Ferrein, Alexander},
  title     = {Autonome Entscheidungsfindung bei Robotern : Planwirtschaft},
  series = {Linux-Magazin},
  journal   = {Linux-Magazin},
  number    = {7},
  issn      = {1432-640X (Print)},
  pages     = {50 -- 53},
  year      = {2004},
  language  = {de}
}
@article{FerreinDyllaLakemeyer2003,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard},
  title     = {Specifying Multirobot Coordination in ICPGolog - From Simulation towards Real Robots / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  pages     = {1 -- 10},
  year      = {2003},
  language  = {en}
}
@article{Heuermann2003,
  author    = {Heuermann, Holger},
  title     = {GSOLT: the calibration procedure for all multi-port vector network analyzers},
  series = {IEEE MTT-S International Microwave Symposium digest : Philadelphia, Pennsylvania, 8 - 13 June 2003 ; [including: 2003 International Microwave Symposium digest, vol. 1-3, RF Integrated Circuit Symposium digest, Automatic RF Techniques Group Symposium digest . Vol. 3},
  journal   = {IEEE MTT-S International Microwave Symposium digest : Philadelphia, Pennsylvania, 8 - 13 June 2003 ; [including: 2003 International Microwave Symposium digest, vol. 1-3, RF Integrated Circuit Symposium digest, Automatic RF Techniques Group Symposium digest . Vol. 3},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {0-780-37696-X},
  pages     = {1815 -- 1818},
  year      = {2003},
  language  = {en}
}
@article{PoppelWolf2013,
  author    = {Poppel, Kristin Isabel and Wolf, Martin R.},
  title     = {M{\"o}glichkeiten und Potentiale von Revisionsmarketing},
  series = {Zeitschrift Interne Revision : ZIR ; Fachzeitschrift f{\"u}r Wissenschaft und Praxis},
  volume    = {48},
  journal   = {Zeitschrift Interne Revision : ZIR ; Fachzeitschrift f{\"u}r Wissenschaft und Praxis},
  number    = {4},
  publisher = {Erich Schmidt Verlag},
  address   = {Berlin},
  issn      = {0044-3816},
  pages     = {200 -- 208},
  year      = {2013},
  language  = {de}
}
@article{Heuermann1997,
  author    = {Heuermann, Holger},
  title     = {Microwave On-Wafer Measurements with Activ Needle Probe Tips},
  pages     = {208 -- 214},
  year      = {1997},
  language  = {en}
}
@article{HeuermannLuenebach2005,
  author    = {Heuermann, Holger and L{\"u}nebach, M.},
  title     = {A Novel Dual-Mode-Design for Push-Push Oscillators with Improved Phase Noise Performance. Heuermann, Holger; L{\"u}nebach, M.},
  series = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 1},
  journal   = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 1},
  publisher = {Horizon House Publ},
  address   = {London},
  isbn      = {2-9600551-0-1},
  pages     = {4 pp.},
  year      = {2005},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Modelling Production of personalized information services and their delivery on multiple distribution channels},
  series = {Personalization Techniques in Electronic Publishing on the Web. Workshop in the Framework of the 2nd international conference on Adaptive Hypermedia and adaptive web based systems (AH2002) in Malaga (ES)},
  journal   = {Personalization Techniques in Electronic Publishing on the Web. Workshop in the Framework of the 2nd international conference on Adaptive Hypermedia and adaptive web based systems (AH2002) in Malaga (ES)},
  pages     = {19 -- 30},
  year      = {2002},
  language  = {en}
}
@incollection{NiemuellerEwertReuteretal.2014,
  author    = {Niem{\"u}ller, Tim and Ewert, Daniel and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {RoboCup logistics league sponsored by festo: A competitive factory automation testbed},
  series = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  booktitle = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  publisher = {Springer},
  address   = {Berlin},
  organization    = {RoboCup International Symposium <17, 2013, Eindhoven>},
  isbn      = {978-3-662-44467-2 (Print) 978-3-662-44468-9 (Online)},
  pages     = {336 -- 347},
  year      = {2014},
  abstract  = {A new trend in automation is to deploy so-called cyber-physical systems (CPS) which combine computation with physical processes. The novel RoboCup Logistics League Sponsored by Festo (LLSF) aims at such CPS logistic scenarios in an automation setting. A team of robots has to produce products from a number of semi-finished products which they have to machine during the game. Different production plans are possible and the robots need to recycle scrap byproducts. This way, the LLSF is a very interesting league offering a number of challenging research questions for planning, coordination, or communication in an application-driven scenario. In this paper, we outline the objectives of the LLSF and present steps for developing the league further towards a benchmark for logistics scenarios for CPS. As a major milestone we present the new automated referee system which helps in governing the game play as well as keeping track of the scored points in a very complex factory scenario.},
  language  = {en}
}
@book{BochmannRitz2013,
  author    = {Bochmann, Sandra and Ritz, Thomas},
  title     = {Prototyping tools for mobile applications},
  publisher = {Steinbeis-Ed.},
  address   = {Stuttgart},
  isbn      = {978-3-943356-45-8},
  pages     = {234 S. : Ill., graph. Darst.},
  year      = {2013},
  language  = {en}
}