@inproceedings{HorikawaOkadaYamaguchietal.2021,
  author    = {Horikawa, Atsushi and Okada, Kunio and Yamaguchi, Masato and Aoki, Shigeki and Wirsum, Manfred and Funke, Harald and Kusterer, Karsten},
  title     = {Combustor development and engine demonstration of micro-mix hydrogen combustion applied to M1A-17 gas turbine},
  series = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3B: Combustion, Fuels, and Emissions},
  booktitle = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3B: Combustion, Fuels, and Emissions},
  doi       = {10.1115/GT2021-59666},
  pages     = {13 Seiten},
  year      = {2021},
  abstract  = {Kawasaki Heavy Industries, LTD. (KHI) has research and development projects for a future hydrogen society. These projects comprise the complete hydrogen cycle, including the production of hydrogen gas, the refinement and liquefaction for transportation and storage, and finally the utilization in a gas turbine for electricity and heat supply. Within the development of the hydrogen gas turbine, the key technology is stable and low NOx hydrogen combustion, namely the Dry Low NOx (DLN) hydrogen combustion. KHI, Aachen University of Applied Science, and B\&B-AGEMA have investigated the possibility of low NOx micro-mix hydrogen combustion and its application to an industrial gas turbine combustor. From 2014 to 2018, KHI developed a DLN hydrogen combustor for a 2MW class industrial gas turbine with the micro-mix technology. Thereby, the ignition performance, the flame stability for equivalent rotational speed, and higher load conditions were investigated. NOx emission values were kept about half of the Air Pollution Control Law in Japan: 84ppm (O2-15\%). Hereby, the elementary combustor development was completed. From May 2020, KHI started the engine demonstration operation by using an M1A-17 gas turbine with a co-generation system located in the hydrogen-fueled power generation plant in Kobe City, Japan. During the first engine demonstration tests, adjustments of engine starting and load control with fuel staging were investigated. On 21st May, the electrical power output reached 1,635 kW, which corresponds to 100\% load (ambient temperature 20 °C), and thereby NOx emissions of 65 ppm (O2-15, 60 RH\%) were verified. Here, for the first time, a DLN hydrogen-fueled gas turbine successfully generated power and heat.},
  language  = {en}
}
@inproceedings{KronigerHorikawaFunkeetal.2021,
  author    = {Kroniger, Daniel and Horikawa, Atsushi and Funke, Harald and Pf{\"a}ffle, Franziska and Kishimoto, Tsuyoshi and Okada, Koichi},
  title     = {Experimental and numerical investigation on the effect of pressure on micromix hydrogen combustion},
  series = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3A: Combustion, Fuels, and Emissions},
  booktitle = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3A: Combustion, Fuels, and Emissions},
  publisher = {ASME},
  address   = {New York, NY},
  doi       = {10.1115/GT2021-58926},
  pages     = {11 Seiten},
  year      = {2021},
  abstract  = {The micromix (MMX) combustion concept is a DLN gas turbine combustion technology designed for high hydrogen content fuels. Multiple non-premixed miniaturized flames based on jet in cross-flow (JICF) are inherently safe against flashback and ensure a stable operation in various operative conditions. The objective of this paper is to investigate the influence of pressure on the micromix flame with focus on the flame initiation point and the NOx emissions. A numerical model based on a steady RANS approach and the Complex Chemistry model with relevant reactions of the GRI 3.0 mechanism is used to predict the reactive flow and NOx emissions at various pressure conditions. Regarding the turbulence-chemical interaction, the Laminar Flame Concept (LFC) and the Eddy Dissipation Concept (EDC) are compared. The numerical results are validated against experimental results that have been acquired at a high pressure test facility for industrial can-type gas turbine combustors with regard to flame initiation and NOx emissions. The numerical approach is adequate to predict the flame initiation point and NOx emission trends. Interestingly, the flame shifts its initiation point during the pressure increase in upstream direction, whereby the flame attachment shifts from anchoring behind a downstream located bluff body towards anchoring directly at the hydrogen jet. The LFC predicts this change and the NOx emissions more accurately than the EDC. The resulting NOx correlation regarding the pressure is similar to a non-premixed type combustion configuration.},
  language  = {en}
}
@inproceedings{MuellerSchmittLeiseetal.2021,
  author    = {M{\"u}ller, Tim M. and Schmitt, Andreas and Leise, Philipp and Meck, Tobias and Altherr, Lena and Pelz, Peter F. and Pfetsch, Marc E.},
  title     = {Validation of an optimized resilient water supply system},
  series = {Uncertainty in Mechanical Engineering},
  booktitle = {Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-77255-0},
  doi       = {10.1007/978-3-030-77256-7_7},
  pages     = {70 -- 80},
  year      = {2021},
  abstract  = {Component failures within water supply systems can lead to significant performance losses. One way to address these losses is the explicit anticipation of failures within the design process. We consider a water supply system for high-rise buildings, where pump failures are the most likely failure scenarios. We explicitly consider these failures within an early design stage which leads to a more resilient system, i.e., a system which is able to operate under a predefined number of arbitrary pump failures. We use a mathematical optimization approach to compute such a resilient design. This is based on a multi-stage model for topology optimization, which can be described by a system of nonlinear inequalities and integrality constraints. Such a model has to be both computationally tractable and to represent the real-world system accurately. We therefore validate the algorithmic solutions using experiments on a scaled test rig for high-rise buildings. The test rig allows for an arbitrary connection of pumps to reproduce scaled versions of booster station designs for high-rise buildings. We experimentally verify the applicability of the presented optimization model and that the proposed resilience properties are also fulfilled in real systems.},
  language  = {en}
}
@article{Olbertz2021,
  author    = {Olbertz, Klaus},
  title     = {Die Dienstreisezeit als Arbeitszeit - oder doch nicht? : Zur arbeitgeberfreundlichen Bewertung von Dienstreisezeiten durch das Bundesarbeitsgericht},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {1},
  issn      = {0028-3460},
  pages     = {38 -- 44},
  year      = {2021},
  abstract  = {Der arbeitsrechtlich richtige Umgang mit Zeiten einer Dienstreise kann in der betrieblichen Praxis Probleme bereiten. Ob die Reisezeiten als solche Arbeitszeit i. S. des Arbeitszeitgesetzes (ArbZG ) darstellen, also bspw. auf die t{\"a}gliche H{\"o}chstarbeitszeit angerechnet werden m{\"u}ssen oder nicht, ist oftmals genauso unklar wie die Frage, ob und inwieweit Reisezeiten verg{\"u}tungspflichtig sind. Aber auch, ob ein Arbeitnehmer {\"u}berhaupt zur Durchf{\"u}hrung einer Dienstreise verpflichtet werden kann, ist ein m{\"o}glicher Anlass von Streitigkeiten zwischen den Arbeitsvertragsparteien, wie verschiedene Gerichtsentscheidungen zeigen. Der nachfolgende Beitrag beantwortet die aufgeworfenen Fragen und gibt hierzu einen praxisorientierten {\"U}berblick.},
  language  = {de}
}
@inproceedings{MandekarJentschLutzetal.2021,
  author    = {Mandekar, Swati and Jentsch, Lina and Lutz, Kai and Behbahani, Mehdi and Melnykowycz, Mark},
  title     = {Earable design analysis for sleep EEG measurements},
  series = {UbiComp '21},
  booktitle = {UbiComp '21},
  doi       = {10.1145/3460418.3479328},
  pages     = {171 -- 175},
  year      = {2021},
  abstract  = {Conventional EEG devices cannot be used in everyday life and hence, past decade research has been focused on Ear-EEG for mobile, at-home monitoring for various applications ranging from emotion detection to sleep monitoring. As the area available for electrode contact in the ear is limited, the electrode size and location play a vital role for an Ear-EEG system. In this investigation, we present a quantitative study of ear-electrodes with two electrode sizes at different locations in a wet and dry configuration. Electrode impedance scales inversely with size and ranges from 450 kΩ to 1.29 MΩ for dry and from 22 kΩ to 42 kΩ for wet contact at 10 Hz. For any size, the location in the ear canal with the lowest impedance is ELE (Left Ear Superior), presumably due to increased contact pressure caused by the outer-ear anatomy. The results can be used to optimize signal pickup and SNR for specific applications. We demonstrate this by recording sleep spindles during sleep onset with high quality (5.27 μVrms).},
  language  = {en}
}
@article{HeinkeKnickerAlbracht2021,
  author    = {Heinke, Lars N. and Knicker, Axel J. and Albracht, Kirsten},
  title     = {Test-retest reliability of the internal shoulder rotator muscles' stretch reflex in healthy men},
  series = {Journal of Electromyography and Kinesiology},
  volume    = {62},
  journal   = {Journal of Electromyography and Kinesiology},
  number    = {Article 102611},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1050-6411},
  doi       = {10.1016/j.jelekin.2021.102611},
  year      = {2021},
  abstract  = {Until now the reproducibility of the short latency stretch reflex of the internal rotator muscles of the glenohumeral joint has not been identified. Twenty-three healthy male participants performed three sets of external shoulder rotation stretches with various pre-activation levels on two different dates of measurement to assess test-retest reliability. All stretches were applied with a dynamometer acceleration of 104°/s2 and a velocity of 150°/s. Electromyographical response was measured via surface EMG. Reflex latencies showed a pre-activation effect (ƞ2 = 0,355). ICC ranged from 0,735 to 0,909 indicating an overall "good" relative reliability. SRD 95\% lay between ±7,0 to ±12,3 ms.. The reflex gain showed overall poor test-retest reproducibility. The chosen methodological approach presented a suitable test protocol for shoulder muscles stretch reflex latency evaluation. A proof-of-concept study to validate the presented methodical approach in shoulder involvement including subjects with clinically relevant conditions is recommended.},
  language  = {en}
}
@book{DiktaScheer2021,
  author    = {Dikta, Gerhard and Scheer, Marsel},
  title     = {Bootstrap Methods: With Applications in R},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-73480-0},
  doi       = {10.1007/978-3-030-73480-0},
  pages     = {XVI, 256 Seiten},
  year      = {2021},
  abstract  = {This book provides a compact introduction to the bootstrap method. In addition to classical results on point estimation and test theory, multivariate linear regression models and generalized linear models are covered in detail. Special attention is given to the use of bootstrap procedures to perform goodness-of-fit tests to validate model or distributional assumptions. In some cases, new methods are presented here for the first time. The text is motivated by practical examples and the implementations of the corresponding algorithms are always given directly in R in a comprehensible form. Overall, R is given great importance throughout. Each chapter includes a section of exercises and, for the more mathematically inclined readers, concludes with rigorous proofs. The intended audience is graduate students who already have a prior knowledge of probability theory and mathematical statistics.},
  language  = {en}
}
@article{HeelDiktaBraekers2021,
  author    = {Heel, Mareike van and Dikta, Gerhard and Braekers, Roel},
  title     = {Bootstrap based goodness‑of‑fit tests for binary multivariate regression models},
  series = {Journal of the Korean Statistical Society},
  volume    = {51},
  journal   = {Journal of the Korean Statistical Society},
  publisher = {Springer Nature},
  address   = {Singapur},
  issn      = {2005-2863 (Online)},
  doi       = {10.1007/s42952-021-00142-4},
  pages     = {28 Seiten},
  year      = {2021},
  abstract  = {We consider a binary multivariate regression model where the conditional expectation of a binary variable given a higher-dimensional input variable belongs to a parametric family. Based on this, we introduce a model-based bootstrap (MBB) for higher-dimensional input variables. This test can be used to check whether a sequence of independent and identically distributed observations belongs to such a parametric family. The approach is based on the empirical residual process introduced by Stute (Ann Statist 25:613-641, 1997). In contrast to Stute and Zhu's approach (2002) Stute \& Zhu (Scandinavian J Statist 29:535-545, 2002), a transformation is not required. Thus, any problems associated with non-parametric regression estimation are avoided. As a result, the MBB method is much easier for users to implement. To illustrate the power of the MBB based tests, a small simulation study is performed. Compared to the approach of Stute \& Zhu (Scandinavian J Statist 29:535-545, 2002), the simulations indicate a slightly improved power of the MBB based method. Finally, both methods are applied to a real data set.},
  language  = {en}
}
@inproceedings{HueningWacheMagiera2021,
  author    = {H{\"u}ning, Felix and Wache, Franz-Josef and Magiera, David},
  title     = {Redundant bus systems using dual-mode radio},
  series = {Proceedings of Sixth International Congress on Information and Communication Technology},
  booktitle = {Proceedings of Sixth International Congress on Information and Communication Technology},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-16-2379-0},
  doi       = {10.1007/978-981-16-2380-6_73},
  pages     = {835 -- 842},
  year      = {2021},
  abstract  = {Communication via serial bus systems, like CAN, plays an important role for all kinds of embedded electronic and mechatronic systems. To cope up with the requirements for functional safety of safety-critical applications, there is a need to enhance the safety features of the communication systems. One measure to achieve a more robust communication is to add redundant data transmission path to the applications. In general, the communication of real-time embedded systems like automotive applications is tethered, and the redundant data transmission lines are also tethered, increasing the size of the wiring harness and the weight of the system. A radio link is preferred as a redundant transmission line as it uses a complementary transmission medium compared to the wired solution and in addition reduces wiring harness size and weight. Standard wireless links like Wi-Fi or Bluetooth cannot meet the requirements for real-time capability with regard to bus communication. Using the new dual-mode radio enables a redundant transmission line meeting all requirements with regard to real-time capability, robustness and transparency for the data bus. In addition, it provides a complementary transmission medium with regard to commonly used tethered links. A CAN bus system is used to demonstrate the redundant data transfer via tethered and wireless CAN.},
  language  = {en}
}
@inproceedings{KloeserKohlKraftetal.2021,
  author    = {Kl{\"o}ser, Lars and Kohl, Philipp and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {Multi-attribute relation extraction (MARE): simplifying the application of relation extraction},
  series = {Proceedings of the 2nd International Conference on Deep Learning Theory and Applications DeLTA - Volume 1},
  booktitle = {Proceedings of the 2nd International Conference on Deep Learning Theory and Applications DeLTA - Volume 1},
  publisher = {SciTePress},
  address   = {Set{\´u}bal},
  isbn      = {978-989-758-526-5},
  doi       = {10.5220/0010559201480156},
  pages     = {148 -- 156},
  year      = {2021},
  abstract  = {Natural language understanding's relation extraction makes innovative and encouraging novel business concepts possible and facilitates new digitilized decision-making processes. Current approaches allow the extraction of relations with a fixed number of entities as attributes. Extracting relations with an arbitrary amount of attributes requires complex systems and costly relation-trigger annotations to assist these systems. We introduce multi-attribute relation extraction (MARE) as an assumption-less problem formulation with two approaches, facilitating an explicit mapping from business use cases to the data annotations. Avoiding elaborated annotation constraints simplifies the application of relation extraction approaches. The evaluation compares our models to current state-of-the-art event extraction and binary relation extraction methods. Our approaches show improvement compared to these on the extraction of general multi-attribute relations.},
  language  = {en}
}
@inproceedings{AdenackerGerhardsOttenetal.2021,
  author    = {Adenacker, J. and Gerhards, Benjamin and Otten, Christian and Schleser, Markus},
  title     = {Laserstrahlschweißen von Aluminium-Kupfer-Werkstoffkombinationen f{\"u}r die Elektromobilit{\"a}t},
  series = {DVS CONGRESS 2021},
  booktitle = {DVS CONGRESS 2021},
  publisher = {DVS Media GmbH},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-96144-146-4},
  pages     = {31 -- 38},
  year      = {2021},
  language  = {de}
}
@article{Timme2021,
  author    = {Timme, Michael},
  title     = {Rechtsprechungs{\"u}bersicht zum Wohnraummietrecht},
  series = {Monatsschrift f{\"u}r Deutsches Recht},
  volume    = {75},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht},
  number    = {1},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {2194-4202},
  doi       = {10.9785/mdtr-2021-750113},
  pages     = {6 -- 11},
  year      = {2021},
  language  = {de}
}
@book{Timme2021,
  author    = {Timme, Michael},
  title     = {BGB Crashkurs: der sichere Weg durch die Pr{\"u}fung},
  edition   = {6. Auflage},
  publisher = {C.H. Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-77349-5},
  pages     = {160 Seiten},
  year      = {2021},
  abstract  = {Dieser "Crashkurs" eignet sich ausgezeichnet f{\"u}r die kompakte Wiederholung und die zielgerichtete Pr{\"u}fungsvorbereitung. Das Buch ist aufgrund seiner fallbezogenen Ausrichtung vor allem f{\"u}r Anf{\"a}nger gedacht, eignet sich aber auch f{\"u}r fortgeschrittene Studierende zur kompakten Wiederholung. Einfache Merks{\"a}tze, F{\"a}lle, {\"U}bersichten, Definitionen und kurze Zusammenfassungen lassen sich leicht einpr{\"a}gen und geben Sicherheit f{\"u}r die Pr{\"u}fung. Vorteile auf einen Blick: Das wichtigste BGB-Know-how als Repetitorium vor der Pr{\"u}fung, mit erprobten Merks{\"a}tzen und kurzen Zusammenfassungen, Fall f{\"u}r Fall sicher durch die Pr{\"u}fung},
  language  = {de}
}
@inproceedings{KohlSchmidtsKloeseretal.2021,
  author    = {Kohl, Philipp and Schmidts, Oliver and Kl{\"o}ser, Lars and Werth, Henri and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {STAMP 4 NLP - an agile framework for rapid quality-driven NLP applications development},
  series = {Quality of Information and Communications Technology. QUATIC 2021},
  booktitle = {Quality of Information and Communications Technology. QUATIC 2021},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-85346-4},
  doi       = {10.1007/978-3-030-85347-1_12},
  pages     = {156 -- 166},
  year      = {2021},
  abstract  = {The progress in natural language processing (NLP) research over the last years, offers novel business opportunities for companies, as automated user interaction or improved data analysis. Building sophisticated NLP applications requires dealing with modern machine learning (ML) technologies, which impedes enterprises from establishing successful NLP projects. Our experience in applied NLP research projects shows that the continuous integration of research prototypes in production-like environments with quality assurance builds trust in the software and shows convenience and usefulness regarding the business goal. We introduce STAMP 4 NLP as an iterative and incremental process model for developing NLP applications. With STAMP 4 NLP, we merge software engineering principles with best practices from data science. Instantiating our process model allows efficiently creating prototypes by utilizing templates, conventions, and implementations, enabling developers and data scientists to focus on the business goals. Due to our iterative-incremental approach, businesses can deploy an enhanced version of the prototype to their software environment after every iteration, maximizing potential business value and trust early and avoiding the cost of successful yet never deployed experiments.},
  language  = {en}
}
@inproceedings{SchmidtsKraftWinkensetal.2021,
  author    = {Schmidts, Oliver and Kraft, Bodo and Winkens, Marvin and Z{\"u}ndorf, Albert},
  title     = {Catalog integration of heterogeneous and volatile product data},
  series = {DATA 2020: Data Management Technologies and Applications},
  booktitle = {DATA 2020: Data Management Technologies and Applications},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-83013-7},
  doi       = {10.1007/978-3-030-83014-4_7},
  pages     = {134 -- 153},
  year      = {2021},
  abstract  = {The integration of frequently changing, volatile product data from different manufacturers into a single catalog is a significant challenge for small and medium-sized e-commerce companies. They rely on timely integrating product data to present them aggregated in an online shop without knowing format specifications, concept understanding of manufacturers, and data quality. Furthermore, format, concepts, and data quality may change at any time. Consequently, integrating product catalogs into a single standardized catalog is often a laborious manual task. Current strategies to streamline or automate catalog integration use techniques based on machine learning, word vectorization, or semantic similarity. However, most approaches struggle with low-quality or real-world data. We propose Attribute Label Ranking (ALR) as a recommendation engine to simplify the integration process of previously unknown, proprietary tabular format into a standardized catalog for practitioners. We evaluate ALR by focusing on the impact of different neural network architectures, language features, and semantic similarity. Additionally, we consider metrics for industrial application and present the impact of ALR in production and its limitations.},
  language  = {en}
}
@article{ZabirovSchleserBucherer2021,
  author    = {Zabirov, Alexander and Schleser, Markus and Bucherer, Sebastian},
  title     = {F{\"u}ge- und Dichtkonzept f{\"u}r einen Leichtbauverbrennungsmotor},
  series = {adh{\"a}sion KLEBEN \& DICHTEN},
  volume    = {65},
  journal   = {adh{\"a}sion KLEBEN \& DICHTEN},
  number    = {11},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {2192-8681},
  doi       = {10.1007/s35145-021-0531-5},
  pages     = {12 -- 19},
  year      = {2021},
  language  = {de}
}
@incollection{PfetschAbeleAltherretal.2021,
  author    = {Pfetsch, Marc E. and Abele, Eberhard and Altherr, Lena and B{\"o}lling, Christian and Br{\"o}tz, Nicolas and Dietrich, Ingo and Gally, Tristan and Geßner, Felix and Groche, Peter and Hoppe, Florian and Kirchner, Eckhard and Kloberdanz, Hermann and Knoll, Maximilian and Kolvenbach, Philip and Kuttich-Meinlschmidt, Anja and Leise, Philipp and Lorenz, Ulf and Matei, Alexander and Molitor, Dirk A. and Niessen, Pia and Pelz, Peter F. and Rexer, Manuel and Schmitt, Andreas and Schmitt, Johann M. and Schulte, Fiona and Ulbrich, Stefan and Weigold, Matthias},
  title     = {Strategies for mastering uncertainty},
  series = {Mastering uncertainty in mechanical engineering},
  booktitle = {Mastering uncertainty in mechanical engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78353-2},
  doi       = {10.1007/978-3-030-78354-9_6},
  pages     = {365 -- 456},
  year      = {2021},
  abstract  = {This chapter describes three general strategies to master uncertainty in technical systems: robustness, flexibility and resilience. It builds on the previous chapters about methods to analyse and identify uncertainty and may rely on the availability of technologies for particular systems, such as active components. Robustness aims for the design of technical systems that are insensitive to anticipated uncertainties. Flexibility increases the ability of a system to work under different situations. Resilience extends this characteristic by requiring a given minimal functional performance, even after disturbances or failure of system components, and it may incorporate recovery. The three strategies are described and discussed in turn. Moreover, they are demonstrated on specific technical systems.},
  language  = {en}
}
@article{Olbertz2021,
  author    = {Olbertz, Klaus},
  title     = {Wichtige arbeitsrechtliche Entwicklungen im Jahr 2020 : Der Jahresr{\"u}ckblick auf alles Wissenswerte im Arbeitsrecht des vergangenen Jahres},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {10},
  issn      = {0028-3460},
  pages     = {703 -- 715},
  year      = {2021},
  abstract  = {Im Anschluss an die arbeitsrechtlichen Jahres{\"u}bersichten der vergangenen Jahre (NWB 5/2019 S. 266; NWB 8/2020 S. 557) gibt der nachfolgende Beitrag einen {\"U}berblick {\"u}ber relevante Entwicklungen im Arbeitsrecht des Jahres 2020. Der erste Teil besch{\"a}ftigt sich hierbei mit gesetzlichen {\"A}nderungen. Neben Regelungen, die auf die COVID-19-Pandemie zur{\"u}ckgef{\"u}hrt werden k{\"o}nnen, hat der Gesetzgeber auch andere Vorhaben umgesetzt. So wurde u. a. das Arbeitnehmerentsenderecht reformiert. F{\"u}r Diskussionen sorgt(e) zudem das Gesetzesvorhaben zur Regelung mobiler Arbeit. Im zweiten Teil werden f{\"u}r die Praxis wichtige h{\"o}chstrichterliche Gerichtsentscheidungen zum Arbeitsrecht erl{\"a}utert, alphabetisch sortiert von A (wie Antidiskriminierungsrecht) bis U (wie Urlaub).},
  language  = {de}
}
@article{Olbertz2021,
  author    = {Olbertz, Klaus},
  title     = {Die Flexibilisierung von Arbeitszeit durch den Abruf von Arbeit : M{\"o}glichkeiten und Grenzen arbeitsvertraglicher Gestaltung zur Vermeidung von „Leerlaufzeiten"},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {15},
  issn      = {0028-3460},
  pages     = {1055 -- 1063},
  year      = {2021},
  abstract  = {Die Arbeitswelt ist im Umbruch. Der Bedarf an flexiblen Arbeitszeitmodellen nimmt stetig zu, wobei die Corona-Pandemie dieses Bed{\"u}rfnis nochmals versch{\"a}rft hat. Gerade auch in kleineren und mittleren Unternehmen w{\"a}chst die Notwendigkeit, den Einsatz der Besch{\"a}ftigten m{\"o}glichst bedarfsgerecht zu steuern, also bei guter Auftragslage mehr Arbeitszeit abzurufen und bei ausbleibenden Auftr{\"a}gen die Arbeitszeit zu reduzieren und somit bezahlte „Leerlaufzeiten" zu vermeiden. Der Gesetzgeber stellt den Arbeitgebern hierf{\"u}r das Instrument der sog. Abrufarbeit ( \S 12 Teilzeit- und Befristungsgesetz - TzBfG ) zur Verf{\"u}gung. In dem nachfolgenden Beitrag werden M{\"o}glichkeiten und Grenzen der Abrufarbeit skizziert und konkrete arbeitsvertragliche Gestaltungsm{\"o}glichkeiten aufgezeigt.},
  language  = {de}
}
@article{Olbertz2021,
  author    = {Olbertz, Klaus},
  title     = {Vertragsgestaltungen bei der Besch{\"a}ftigung von Rentnern in Unternehmen : (Befristete) Besch{\"a}ftigungsverh{\"a}ltnisse als sinnvolles Instrument zum Schließen von Personall{\"u}cken},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {25},
  issn      = {0028-3460},
  pages     = {1810 -- 1817},
  year      = {2021},
  language  = {de}
}
@article{BraunChengDoweyetal.2021,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Performance evaluation of skill-based order-assignment in production environments with multi-agent systems},
  series = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics},
  journal   = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics},
  number    = {Early Access},
  publisher = {IEEE},
  address   = {New York},
  issn      = {2687-9735},
  doi       = {10.1109/JESTIE.2021.3108524},
  year      = {2021},
  abstract  = {The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models.},
  language  = {en}
}
@article{JildehWagnerSchoening2021,
  author    = {Jildeh, Zaid B. and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Sterilization of Objects, Products, and Packaging Surfaces and Their Characterization in Different Fields of Industry: The Status in 2020},
  series = {physica status solidi (a) applications and materials science},
  volume    = {218},
  journal   = {physica status solidi (a) applications and materials science},
  number    = {13},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.202000732},
  pages     = {27 Seiten},
  year      = {2021},
  abstract  = {The treatment method to deactivate viable microorganisms from objects or products is termed sterilization. There are multiple forms of sterilization, each intended to be applied for a specific target, which depends on—but not limited to—the thermal, physical, and chemical stability of that target. Herein, an overview on the currently used sterilization processes in the global market is provided. Different sterilization techniques are grouped under a category that describes the method of treatment: radiation (gamma, electron beam, X-ray, and ultraviolet), thermal (dry and moist heat), and chemical (ethylene oxide, ozone, chlorine dioxide, and hydrogen peroxide). For each sterilization process, the typical process parameters as defined by regulations and the mode of antimicrobial activity are summarized. Finally, the recommended microorganisms that are used as biological indicators to validate sterilization processes in accordance with the rules that are established by various regulatory agencies are summarized.},
  language  = {en}
}
@phdthesis{Bayer2021,
  author    = {Bayer, Robin},
  title     = {Development of a novel in-vitro vascular model for determination of physiological and pathophysiological mechanobiology},
  publisher = {Universit{\"a}t zu K{\"o}ln},
  address   = {K{\"o}ln},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:38-362212},
  pages     = {IV, 115 Seiten},
  year      = {2021},
  language  = {en}
}
@article{MolinnusDrinicIkenetal.2021,
  author    = {Molinnus, Denise and Drinic, Aleksander and Iken, Heiko and Kr{\"o}ger, Nadja and Zinser, Max and Smeets, Ralf and K{\"o}pf, Marius and Kopp, Alexander and Sch{\"o}ning, Michael Josef},
  title     = {Towards a flexible electrochemical biosensor fabricated from biocompatible Bombyx mori silk},
  series = {Biosensors and Bioelectronics},
  volume    = {183},
  journal   = {Biosensors and Bioelectronics},
  number    = {Art. 113204},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2021.113204},
  year      = {2021},
  language  = {en}
}
@article{Fissabre2021,
  author    = {Fissabre, Anke},
  title     = {Ein pazifistisches Kriegerdenkmal der Moderne. Das Totenkreuz von Rudolf Schwarz},
  series = {In situ: Zeitschrift f{\"u}r Architekturgeschichte},
  journal   = {In situ: Zeitschrift f{\"u}r Architekturgeschichte},
  number    = {1},
  publisher = {Wernersche Verlagsgesellschaft},
  address   = {Worms},
  issn      = {1866-959X},
  pages     = {127 -- 138},
  year      = {2021},
  language  = {de}
}
@article{GeorgStollenwerkReinkensmeieretal.2021,
  author    = {Georg, J{\"o}rg Heiner and Stollenwerk, Dominik and Reinkensmeier, Sebastian and Jungbluth, Christian},
  title     = {„Smartes" Laden an {\"o}ffentlich zug{\"a}nglichen Lades{\"a}ulen - Teil 1: Quo vadis, Marktdesign?},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {71},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {1/2},
  publisher = {ETV Energieverlag},
  address   = {Essen},
  isbn      = {0720-6240},
  issn      = {0013-743X},
  pages     = {64 -- 69},
  year      = {2021},
  language  = {de}
}
@article{StollenwerkReinkensmeierGeorgetal.2021,
  author    = {Stollenwerk, Dominik and Reinkensmeier, Sebastian and Georg, J{\"o}rg Heiner and Jungbluth, Christian},
  title     = {„Smartes" Laden an {\"o}ffentlich zug{\"a}nglichen Lades{\"a}ulen - Teil 2: USER-Verhalten und -Erwartungen},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {71},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {3},
  publisher = {ETV Energieverlag},
  address   = {Essen},
  isbn      = {0720-6240},
  issn      = {0013-743X},
  pages     = {38 -- 42},
  year      = {2021},
  language  = {de}
}
@article{HennesLaumann2021,
  author    = {Hennes, Philipp and Laumann, J{\"o}rg},
  title     = {Ansatz der Drehbehinderung aus Koppelpfetten mit d{\"u}nnwandigen kaltgeformten Z-Profilen},
  series = {Stahlbau},
  volume    = {90},
  journal   = {Stahlbau},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049},
  doi       = {10.1002/stab.202000104},
  pages     = {158 -- 168},
  year      = {2021},
  language  = {de}
}
@article{YoshinobuSchoening2021,
  author    = {Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {Light-addressable potentiometric sensors (LAPS) for cell monitoring and biosensing},
  series = {Current Opinion in Electrochemistry},
  journal   = {Current Opinion in Electrochemistry},
  number    = {In Press, Journal Pre-proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2451-9103},
  doi       = {10.1016/j.coelec.2021.100727},
  year      = {2021},
  language  = {en}
}
@article{Maurischat2021,
  author    = {Maurischat, Andreas},
  title     = {Algebraic independence of the Carlitz period and its hyperderivatives},
  pages     = {1 -- 12},
  year      = {2021},
  language  = {en}
}
@article{WertIkenSchoeningetal.2021,
  author    = {Wert, Stefan and Iken, Heiko and Sch{\"o}ning, Michael Josef and Matysik, Frank-Michael},
  title     = {Development of a temperature-pulse enhanced electrochemical glucose biosensor and characterization of its stability via scanning electrochemical microscopy},
  series = {Electroanalysis},
  journal   = {Electroanalysis},
  number    = {Early View},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4109},
  doi       = {10.1002/elan.202100089},
  year      = {2021},
  abstract  = {Glucose oxidase (GOx) is an enzyme frequently used in glucose biosensors. As increased temperatures can enhance the performance of electrochemical sensors, we investigated the impact of temperature pulses on GOx that was drop-coated on flattened Pt microwires. The wires were heated by an alternating current. The sensitivity towards glucose and the temperature stability of GOx was investigated by amperometry. An up to 22-fold increase of sensitivity was observed. Spatially resolved enzyme activity changes were investigated via scanning electrochemical microscopy. The application of short (<100 ms) heat pulses was associated with less thermal inactivation of the immobilized GOx than long-term heating.},
  language  = {en}
}
@article{LowisFergusonPaulssenetal.2021,
  author    = {Lowis, Carsten and Ferguson, Simon and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Improved Sc-44 production in a siphon-style liquid target on a medical cyclotron},
  series = {Applied Radiation and Isotopes},
  volume    = {172},
  journal   = {Applied Radiation and Isotopes},
  number    = {Art. 109675},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0969-8043},
  doi       = {10.1016/j.apradiso.2021.109675},
  year      = {2021},
  language  = {en}
}
@article{WaldvogelRitzmannFreyleretal.2021,
  author    = {Waldvogel, Janice and Ritzmann, Ramona and Freyler, Kathrin and Helm, Michael and Monti, Elena and Albracht, Kirsten and St{\"a}udle, Benjamin and Gollhofer, Albert and Narici, Marco},
  title     = {The Anticipation of Gravity in Human Ballistic Movement},
  series = {Frontiers in Physiology},
  journal   = {Frontiers in Physiology},
  publisher = {Frontiers},
  address   = {Lausanne},
  issn      = {1664-042X},
  doi       = {10.3389/fphys.2021.614060},
  year      = {2021},
  abstract  = {Stretch-shortening type actions are characterized by lengthening of the pre-activated muscle-tendon unit (MTU) in the eccentric phase immediately followed by muscle shortening. Under 1 g, pre-activity before and muscle activity after ground contact, scale muscle stiffness, which is crucial for the recoil properties of the MTU in the subsequent push-off. This study aimed to examine the neuro-mechanical coupling of the stretch-shortening cycle in response to gravity levels ranging from 0.1 to 2 g. During parabolic flights, 17 subjects performed drop jumps while electromyography (EMG) of the lower limb muscles was combined with ultrasound images of the gastrocnemius medialis, 2D kinematics and kinetics to depict changes in energy management and performance. Neuro-mechanical coupling in 1 g was characterized by high magnitudes of pre-activity and eccentric muscle activity allowing an isometric muscle behavior during ground contact. EMG during pre-activity and the concentric phase systematically increased from 0.1 to 1 g. Below 1 g the EMG in the eccentric phase was diminished, leading to muscle lengthening and reduced MTU stretches. Kinetic energy at take-off and performance were decreased compared to 1 g. Above 1 g, reduced EMG in the eccentric phase was accompanied by large MTU and muscle stretch, increased joint flexion amplitudes, energy loss and reduced performance. The energy outcome function established by linear mixed model reveals that the central nervous system regulates the extensor muscles phase- and load-specifically. In conclusion, neuro-mechanical coupling appears to be optimized in 1 g. Below 1 g, the energy outcome is compromised by reduced muscle stiffness. Above 1 g, loading progressively induces muscle lengthening, thus facilitating energy dissipation.},
  language  = {en}
}
@article{BohndickBosseJaenschetal.2021,
  author    = {Bohndick, Carla and Bosse, Elke and J{\"a}nsch, Vanessa K. and Barnat, Miriam},
  title     = {How different diversity factors affect the perception of first-year requirements in higher education},
  series = {Frontline Learning Research},
  volume    = {9},
  journal   = {Frontline Learning Research},
  number    = {2},
  publisher = {EARLI},
  issn      = {2295-3159},
  doi       = {10.14786/flr.v9i2.667},
  pages     = {78 -- 95},
  year      = {2021},
  abstract  = {In the light of growing university entry rates, higher education institutions not only serve larger numbers of students, but also seek to meet first-year students' ever more diverse needs. Yet to inform universities how to support the transition to higher education, research only offers limited insights. Current studies tend to either focus on the individual factors that affect student success or they highlight students' social background and their educational biography in order to examine the achievement of selected, non-traditional groups of students. Both lines of research appear to lack integration and often fail to take organisational diversity into account, such as different types of higher education institutions or degree programmes. For a more comprehensive understanding of student diversity, the present study includes individual, social and organisational factors. To gain insights into their role for the transition to higher education, we examine how the different factors affect the students' perception of the formal and informal requirements of the first year as more or less difficult to cope with. As the perceived requirements result from both the characteristics of the students and the institutional context, they allow to investigate transition at the interface of the micro and the meso level of higher education. Latent profile analyses revealed that there are no profiles with complex patterns of perception of the first-year requirements, but the identified groups rather differ in the overall level of perceived challenges. Moreover, SEM indicates that the differences in the perception largely depend on the individual factors self-efficacy and volition.},
  language  = {en}
}
@article{HugenrothNeidlinEngelmannetal.2021,
  author    = {Hugenroth, Kristin and Neidlin, Michael and Engelmann, Ulrich M. and Kaufmann, Tim A. S. and Steinseifer, Ulrich and Heilmann, Torsten},
  title     = {Tipless Transseptal Cannula Concept Combines Improved Hemodynamic Properties and Risk-Reduced Placement: an In Silico Proof-of-Concept},
  series = {Artificial Organs},
  journal   = {Artificial Organs},
  number    = {Accepted Article},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1525-1594},
  doi       = {10.1111/aor.13964},
  year      = {2021},
  language  = {en}
}
@article{GivanoudiCornelisRasschaertetal.2021,
  author    = {Givanoudi, Stella and Cornelis, Peter and Rasschaert, Geertrui and Wackers, Gideon and Iken, Heiko and Rolka, David and Yongabi, Derick and Robbens, Johan and Sch{\"o}ning, Michael Josef and Heyndrickx, Marc and Wagner, Patrick},
  title     = {Selective Campylobacter detection and quantification in poultry: A sensor tool for detecting the cause of a common zoonosis at its source},
  series = {Sensors and Actuators B: Chemical},
  journal   = {Sensors and Actuators B: Chemical},
  number    = {In Press, Journal Pre-proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2021.129484},
  pages     = {Article 129484},
  year      = {2021},
  language  = {en}
}
@inproceedings{UlmerBraunWollert2021,
  author    = {Ulmer, Jessica and Braun, Sebastian and Wollert, J{\"o}rg},
  title     = {Adaptive VR-Produktionsumgebungen f{\"u}r Evaluations- und Schulungst{\"a}tigkeiten},
  series = {Automation 2021: Navigating towards resilient Production},
  booktitle = {Automation 2021: Navigating towards resilient Production},
  publisher = {VDI},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092392-5},
  issn      = {0083-5560},
  doi       = {10.51202/9783181023921-55},
  pages     = {55 -- 64},
  year      = {2021},
  abstract  = {Industrie 4.0 stellt viele Herausforderungen an produzierende Unternehmen und ihre Besch{\"a}f-tigten. Innovative und effektive Trainingsstrategien sind erforderlich, um mit den sich schnell ver{\"a}ndernden Produktionsumgebungen und neuen Fertigungstechnologien Schritt halten zu k{\"o}nnen. Virtual Reality (VR) bietet neue M{\"o}glichkeiten f{\"u}r On-the-Job, On-Demand- und Off-Premise-Schulungen. Diese Arbeit stellt ein neues VR Schulungssystem vor, welches sich flexible an unterschiedliche Trainingsobjekte auf Grundlage von Rezepten und CAD Modellen anpassen l{\"a}sst. Das Konzept basiert auf gerichteten azyklischen Graphen und einem Level-system. Es erm{\"o}glicht eine benutzerindividuelle Lerngeschwindigkeit mittels visueller Ele-mente. Das Konzept wurde f{\"u}r einen mechanischen Anwendungsfall mit Industriekomponen-ten implementiert und in der Industrie 4.0-Modellfabrik der FH Aachen umgesetzt.},
  language  = {de}
}
@techreport{GoellBraunsteinAlbracht2021,
  author    = {G{\"o}ll, Fabian and Braunstein, Bj{\"o}rn and Albracht, Kirsten},
  title     = {Lernende roboterassistierte Systeme f{\"u}r das neuromuskul{\"a}re Training - RoSylerNT; Teilvorhaben: Entwicklung eines neuromuskuloskelettalen Modells als Basis f{\"u}r die Interaktionsf{\"a}higkeiten autonomer Assistenzsysteme},
  publisher = {Deutsche Sporthochschule K{\"o}ln},
  address   = {K{\"o}ln},
  doi       = {10.2314/KXP:1855318741},
  pages     = {14 Seiten},
  year      = {2021},
  language  = {de}
}
@article{RichterBraunsteinStaeudleetal.2021,
  author    = {Richter, Charlotte and Braunstein, Bjoern and St{\"a}udle, Benjamin and Attias, Julia and Suess, Alexander and Weber, Tobias and Mileva, Katja N. and Rittweger, Joern and Green, David A. and Albracht, Kirsten},
  title     = {Gastrocnemius medialis contractile behavior is preserved during 30\% body weight supported gait training},
  series = {Frontiers in Sports and Active Living},
  volume    = {2021},
  journal   = {Frontiers in Sports and Active Living},
  number    = {2},
  publisher = {Frontiers},
  address   = {Lausanne},
  issn      = {2624-9367},
  doi       = {10.3389/fspor.2020.614559},
  pages     = {Artikel 614559},
  year      = {2021},
  abstract  = {Rehabilitative body weight supported gait training aims at restoring walking function as a key element in activities of daily living. Studies demonstrated reductions in muscle and joint forces, while kinematic gait patterns appear to be preserved with up to 30\% weight support. However, the influence of body weight support on muscle architecture, with respect to fascicle and series elastic element behavior is unknown, despite this having potential clinical implications for gait retraining. Eight males (31.9 ± 4.7 years) walked at 75\% of the speed at which they typically transition to running, with 0\% and 30\% body weight support on a lower-body positive pressure treadmill. Gastrocnemius medialis fascicle lengths and pennation angles were measured via ultrasonography. Additionally, joint kinematics were analyzed to determine gastrocnemius medialis muscle-tendon unit lengths, consisting of the muscle's contractile and series elastic elements. Series elastic element length was assessed using a muscle-tendon unit model. Depending on whether data were normally distributed, a paired t-test or Wilcoxon signed rank test was performed to determine if body weight supported walking had any effects on joint kinematics and fascicle-series elastic element behavior. Walking with 30\% body weight support had no statistically significant effect on joint kinematics and peak series elastic element length. Furthermore, at the time when peak series elastic element length was achieved, and on average across the entire stance phase, muscle-tendon unit length, fascicle length, pennation angle, and fascicle velocity were unchanged with respect to body weight support. In accordance with unchanged gait kinematics, preservation of fascicle-series elastic element behavior was observed during walking with 30\% body weight support, which suggests transferability of gait patterns to subsequent unsupported walking.},
  language  = {en}
}
@article{RichterBraunsteinStaeudleetal.2021,
  author    = {Richter, Charlotte and Braunstein, Bj{\"o}rn and St{\"a}udle, Benjamin and Attias, Julia and S{\"u}ss, Alexander and Weber, Tobias and Mileva, Katya N. and Rittweger, J{\"o}rn and Green, David A. and Albracht, Kirsten},
  title     = {Gastrocnemius medialis contractile behavior during running differs between simulated Lunar and Martian gravities},
  series = {Scientific reports},
  volume    = {11},
  journal   = {Scientific reports},
  number    = {Article number: 22555},
  publisher = {Springer Nature},
  address   = {London},
  issn      = {2045-2322},
  doi       = {10.1038/s41598-021-00527-9},
  pages     = {13 Seiten},
  year      = {2021},
  abstract  = {The international partnership of space agencies has agreed to proceed forward to the Moon sustainably. Activities on the Lunar surface (0.16 g) will allow crewmembers to advance the exploration skills needed when expanding human presence to Mars (0.38 g). Whilst data from actual hypogravity activities are limited to the Apollo missions, simulation studies have indicated that ground reaction forces, mechanical work, muscle activation, and joint angles decrease with declining gravity level. However, these alterations in locomotion biomechanics do not necessarily scale to the gravity level, the reduction in gastrocnemius medialis activation even appears to level off around 0.2 g, while muscle activation pattern remains similar. Thus, it is difficult to predict whether gastrocnemius medialis contractile behavior during running on Moon will basically be the same as on Mars. Therefore, this study investigated lower limb joint kinematics and gastrocnemius medialis behavior during running at 1 g, simulated Martian gravity, and simulated Lunar gravity on the vertical treadmill facility. The results indicate that hypogravity-induced alterations in joint kinematics and contractile behavior still persist between simulated running on the Moon and Mars. This contrasts with the concept of a ceiling effect and should be carefully considered when evaluating exercise prescriptions and the transferability of locomotion practiced in Lunar gravity to Martian gravity.},
  language  = {en}
}
@article{WerkhausenWillwacherAlbracht2021,
  author    = {Werkhausen, Amelie and Willwacher, Steffen and Albracht, Kirsten},
  title     = {Medial gastrocnemius muscle fascicles shorten throughout stance during sprint acceleration},
  series = {Scandinavian Journal of Medicine \& Science in Sports},
  volume    = {31},
  journal   = {Scandinavian Journal of Medicine \& Science in Sports},
  number    = {7},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {0905-7188 (Druckausgabe)},
  doi       = {10.1111/sms.13956},
  pages     = {1471 -- 1480},
  year      = {2021},
  abstract  = {The compliant nature of distal limb muscle-tendon units is traditionally considered suboptimal in explosive movements when positive joint work is required. However, during accelerative running, ankle joint net mechanical work is positive. Therefore, this study aims to investigate how plantar flexor muscle-tendon behavior is modulated during fast accelerations. Eleven female sprinters performed maximum sprint accelerations from starting blocks, while gastrocnemius muscle fascicle lengths were estimated using ultrasonography. We combined motion analysis and ground reaction force measurements to assess lower limb joint kinematics and kinetics, and to estimate gastrocnemius muscle-tendon unit length during the first two acceleration steps. Outcome variables were resampled to the stance phase and averaged across three to five trials. Relevant scalars were extracted and analyzed using one-sample and two-sample t-tests, and vector trajectories were compared using statistical parametric mapping. We found that an uncoupling of muscle fascicle behavior from muscle-tendon unit behavior is effectively used to produce net positive mechanical work at the joint during maximum sprint acceleration. Muscle fascicles shortened throughout the first and second steps, while shortening occurred earlier during the first step, where negative joint work was lower compared with the second step. Elastic strain energy may be stored during dorsiflexion after touchdown since fascicles did not lengthen at the same time to dissipate energy. Thus, net positive work generation is accommodated by the reuse of elastic strain energy along with positive gastrocnemius fascicle work. Our results show a mechanism of how muscles with high in-series compliance can contribute to net positive joint work.},
  language  = {en}
}
@article{MontiWaldvogelRitzmannetal.2021,
  author    = {Monti, Elena and Waldvogel, Janice and Ritzmann, Ramona and Freyler, Kathrin and Albracht, Kirsten and Helm, Michael and De Cesare, Niccol{\`o} and Pavan, Piero and Reggiani, Carlo and Gollhofer, Albert and Narici, Marco Vincenzo},
  title     = {Muscle in variable gravity: "I do not know where I am, but I know what to do"},
  series = {Frontiers in Physiology},
  volume    = {12},
  journal   = {Frontiers in Physiology},
  publisher = {Frontiers Research Foundation},
  address   = {Lausanne},
  issn      = {1664-042X},
  doi       = {10.3389/fphys.2021.714655},
  pages     = {19 Seiten},
  year      = {2021},
  abstract  = {Performing tasks, such as running and jumping, requires activation of the agonist and antagonist muscles before (motor unit pre-activation) and during movement performance (Santello and Mcdonagh, 1998). A well-timed and regulated muscle activation elicits a stretch-shortening cycle (SSC) response, naturally occurring in bouncing movements (Ishikawa and Komi, 2004; Taube et al., 2012). By definition, the SSC describes the stretching of a pre-activated muscle-tendon complex immediately followed by a muscle shortening in the concentric push-off phase (Komi, 1984). Given the importance of SSC actions for human movement, it is not surprising that many studies investigated the biomechanics of this phenomenon; in particular, drop jumps (DJs) represent a good paradigm to study muscle fascicle and tendon behavior in ballistic movements involving the SSC. Within a DJ, three main phases [pre-activation, braking, and push-off (PO; Komi, 2000)] have been recognized and extensively studied in common and challenging conditions, such as changes in load, falling height, or simulated hypo-gravity (Avela et al., 1994; Arampatzis et al., 2001; Fukashiro et al., 2005; Ishikawa et al., 2005; Sousa et al., 2007; Ritzmann et al., 2016; Helm et al., 2020). These studies show that the timing and amount of triceps-surae muscle-tendon unit pre-activation in DJs are differentially regulated based on the load applied to the muscle, being optimal in normal "Earth" gravity conditions (Avela et al., 1994), but decreased in simulated hypo-gravity, hyper-gravity (Avela et al., 1994; Ritzmann et al., 2016), or unknown conditions (i.e., unknown falling heights; Helm et al., 2020). Some authors indicated that, when falling from heights different from the optimal one [defined as the drop height giving a maximum DJ performance indicated as peak ground reaction force (GRF) or jump high], electromyographic (EMG) activity of the plantar flexors increases from lower than optimal to higher than optimal heights (Ishikawa and Komi, 2004; Sousa et al., 2007). These findings highlight the ability of the central nervous system to regulate the timing and amount of pre-activation according to different jumping conditions, thus regulating muscle fascicle length, tendon and joint stiffness as well as position, in order to safely land on the ground and quickly re-bounce. Similarly, to pre-activation, also in the braking phase, the plantar flexors are differentially regulated. In optimal height (i.e., load) jumping conditions, gastrocnemius medialis (GM) fascicles shorten at early ground contact (possibly due to the intervention of the stretch reflex; Gollhofer et al., 1992) and behave quasi-isometrically in the late braking phase, enabling tendon elongation, and storage of elastic energy (Gollhofer et al., 1992; Fukashiro et al., 2005; Sousa et al., 2007). When increasing the falling height (augmenting the impact GRF), the quasi-isometric behavior of fascicles disappears, and fast fascicle lengthening occurs (Ishikawa et al., 2005; Sousa et al., 2007). In the third and last PO phase, fascicles shorten and the tendon releases the elastic energy previously stored. Bobbert et al. (1987) reported no influence of jumping height on the work done and on the net vertical impulse assessed during PO; this observation suggests that, despite an optimal DJ performance might be achieved only in specific conditions (falling heights, loads), the central nervous system seems to be able to regulate muscle behavior in order to effectively perform the required task also in challenging situations. Although the regulation of triceps-surae muscle-tendon unit in DJs has been extensively investigated, very few studies focused on sarcomeres behavior during the performance of this SSC movement (Kurokawa et al., 2003; Fukashiro et al., 2005, 2006). Sarcomeres represent muscle contractile units and are known to express different amounts of force depending on their length (Gordon et al., 1966; Walker and Schrodt, 1974); thus, understanding the time course of their responses during DJs is fundamental to gain further insights into muscle force-generating capacity. In vivo measurement of sarcomere length in humans has been so far been performed only in static positions and under highly controlled experimental conditions (Llewellyn et al., 2008; Sanchez et al., 2015). Instead, human sarcomere length estimation (achieved by dividing GM measured fascicle length for a fixed sarcomere number) in dynamic contractions provided an indirect measure of sarcomere operating range during squat jump, countermovement jump, and DJ (Fukashiro et al., 2005, 2006; Kurokawa et al., 2003). The results of these studies showed that sarcomeres operate in the ascending limb of their length-tension (L-T) relationship in all types of jumps, and particularly so in DJ. However, most of the available observations on sarcomere and muscle fascicle behavior were made in condition of constant gravity. Thus, in order to understand how sarcomere and muscle fascicle length are regulated in variable gravity conditions, we performed experiments in a parabolic flight, involving variable gravity levels, ranging from about zero-g to about double the Earth's gravity (1 g; Waldvogel et al., 2021). Specifically, the aims of the present study were as follows: 1. To investigate the ability of the neuromuscular system in regulating fascicle length in response to conditions of variable gravity. 2. To estimate sarcomere operative length in the different DJ phases, in order to calculate its theoretical force production and its possible modulation in conditions of variable gravity. We hypothesized that muscle fascicles would be differentially regulated in different gravity conditions compared to 1 g, particularly in anticipation of landing and re-bouncing in unknown gravity levels. In addition, we hypothesized that sarcomeres would operate in the upper part of the ascending limb of their L-T relationship, possibly lengthening during the braking phase (especially in hyper-gravity) while operating quasi-isometrically in 1 g.},
  language  = {en}
}
@article{StaeudleSeynnesLapsetal.2021,
  author    = {St{\"a}udle, Benjamin and Seynnes, Olivier and Laps, Guido and G{\"o}ll, Fabian and Br{\"u}ggemann, Gert-Peter and Albracht, Kirsten},
  title     = {Recovery from achilles tendon repair: a combination of Postsurgery Outcomes and Insufficient remodeling of muscle and tendon},
  series = {Medicine \& Science in Sports \& Exercise},
  volume    = {53},
  journal   = {Medicine \& Science in Sports \& Exercise},
  number    = {7},
  publisher = {American College of Sports Medicine},
  address   = {Philadelphia, Pa.},
  issn      = {1530-0315},
  doi       = {10.1249/MSS.0000000000002592},
  pages     = {1356 -- 1366},
  year      = {2021},
  abstract  = {Achilles tendon rupture (ATR) patients have persistent functional deficits in the triceps surae muscle-tendon unit (MTU). The complex remodeling of the MTU accompanying these deficits remains poorly understood. The purpose of the present study was to associate in vivo and in silico data to investigate the relations between changes inMTU properties and strength deficits inATR patients. Methods: Elevenmale subjects who had undergone surgical repair of complete unilateral ATR were examined 4.6 ± 2.0 (mean ± SD) yr after rupture. Gastrocnemius medialis (GM) tendon stiffness, morphology, and muscle architecture were determined using ultrasonography. The force-length relation of the plantar flexor muscles was assessed at five ankle joint angles. In addition, simulations (OpenSim) of the GM MTU force-length properties were performed with various iterations of MTU properties found between the unaffected and the affected side. Results: The affected side of the patients displayed a longer, larger, and stiffer GM tendon (13\% ± 10\%, 105\% ± 28\%, and 54\% ± 24\%, respectively) compared with the unaffected side. The GM muscle fascicles of the affected side were shorter (32\% ± 12\%) and with greater pennation angles (31\% ± 26\%). A mean deficit in plantarflexion moment of 31\% ± 10\% was measured. Simulations indicate that pairing an intact muscle with a longer tendon shifts the optimal angular range of peak force outside physiological angular ranges, whereas the shorter muscle fascicles and tendon stiffening seen in the affected side decrease this shift, albeit incompletely. Conclusions: These results suggest that the substantial changes in MTU properties found in ATR patients may partly result from compensatory remodeling, although this process appears insufficient to fully restore muscle function.},
  language  = {en}
}
@incollection{Peterson2021,
  author    = {Peterson, Leif Arne},
  title     = {Holzbau},
  series = {Wof{\"u}r braucht man das eigentlich? Ein Handbuch f{\"u}r Mathematiklehrkr{\"a}fte der Sekundarstufe I und II},
  booktitle = {Wof{\"u}r braucht man das eigentlich? Ein Handbuch f{\"u}r Mathematiklehrkr{\"a}fte der Sekundarstufe I und II},
  editor    = {Schl{\"u}ter, Dominik},
  publisher = {BoD},
  address   = {Norderstedt},
  isbn      = {978-3-7543-2606-0},
  pages     = {21 -- 23},
  year      = {2021},
  language  = {de}
}
@article{Finkenberger2021,
  author    = {Finkenberger, Isabel Maria},
  title     = {Wohnen als Produktionsgemeinschaftsaufgabe},
  series = {Jahrbuch f{\"u}r Christliche Sozialwissenschaften},
  journal   = {Jahrbuch f{\"u}r Christliche Sozialwissenschaften},
  number    = {62},
  publisher = {Aschendorff},
  address   = {M{\"u}nster},
  issn      = {0075-2584},
  doi       = {10.17879/jcsw-2021-3537},
  pages     = {31 -- 42},
  year      = {2021},
  abstract  = {Wohnen als neue soziale Frage ist mehr als die Produktion neuer Formen von Wohnen und deren architektonischer Gestalt, und auch mehr als nur die Umsetzung sich ver{\"a}ndernder, jedoch individuell formulierter Wohnw{\"u}nsche. Sie spannt sich auf zwischen gesellschafts- und nachhaltigkeitspolitischen, hardcore-kapitalistischen und globalen Rahmenbedingungen, Hardware und Software, Individuum und Gemeinwohl, Konsum und Mitgestaltung. Entscheidend sind die Akteure und die Art und Weise, wie und nach welchen Maßst{\"a}ben sie handeln. Entscheidend ist aber auch, Wohnen sowohl kontextuell wie auch programmatisch neu zu denken und dadurch zu neuen Mischungen, Nachbarschaften und Bewertungskriterien einer Projekt- und Stadtentwicklung zu kommen, die mehr als die Summe seiner Einzelteile wollen - ein gutes Leben f{\"u}r Alle abseits der Frage des Geldbeutels und der sozialen Zugeh{\"o}rigkeit.},
  language  = {de}
}
@inproceedings{SchulzeBuxlohGross2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz},
  title     = {Interdisciplinary Course Smart Building Engineering: A new approach of teaching freshmen in remote teamwork project under pandemic restrictions},
  series = {New Perspectives in Science Education - International Conference},
  booktitle = {New Perspectives in Science Education - International Conference},
  publisher = {Filodiritto},
  address   = {Bologna},
  pages     = {4 Seiten},
  year      = {2021},
  abstract  = {In the context of the Corona pandemic and its impact on teaching like digital lectures and exercises a new concept especially for freshmen in demanding courses of Smart Building Engineering became necessary. As there were hardly any face-to-face events at the university, the new teaching concept should enable a good start into engineering studies under pandemic conditions anyway and should also replace the written exam at the end. The students should become active themselves in small teams instead of listening passively to a lecture broadcast online with almost no personal contact. For this purpose, a role play was developed in which the freshmen had to work out a complete solution to the realistic problem of designing, construction planning and implementing a small guesthouse. Each student of the team had to take a certain role like architect, site manager, BIM-manager, electrician and the technitian for HVAC installations. Technical specifications must be complied with, as well as documentation, time planning and cost estimate. The final project folder had to contain technical documents like circuit diagrams for electrical components, circuit diagrams for water and heating, design calculations and components lists. On the other hand construction schedule, construction implementation plan, documentation of the construction progress and minutes of meetings between the various trades had to be submitted as well. In addition to the project folder, a model of the construction project must also be created either as a handmade model or as a digital 3D-model using Computer-aided design (CAD) software. The first steps in the field of Building information modelling (BIM) had also been taken by creating a digital model of the building showing the current planning status in real time as a digital twin. This project turned out to be an excellent training of important student competencies like teamwork, communication skills, and self -organisation and also increased motivation to work on complex technical questions. The aim of giving the student a first impression on the challenges and solutions in building projects with many different technical trades and their points of view was very well achieved and should be continued in the future.},
  language  = {en}
}
@inproceedings{SchulzeBuxlohGross2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz},
  title     = {Miniature urban farming plant: a complex educational "Toy" for engineering students},
  series = {The Future of Education 11th Edition 2021},
  booktitle = {The Future of Education 11th Edition 2021},
  pages     = {4 Seiten},
  year      = {2021},
  abstract  = {Urban farming is an innovative and sustainable way of food production and is becoming more and more important in smart city and quarter concepts. It also enables the production of certain foods in places where they usually dare not produced, such as production of fish or shrimps in large cities far away from the coast. Unfortunately, it is not always possible to show students such concepts and systems in real life as part of courses: visits of such industry plants are sometimes not possible because of distance or are permitted by the operator for hygienic reasons. In order to give the students the opportunity of getting into contact with such an urban farming system and its complex operation, an industrial urban farming plant was set up on a significantly smaller scale. Therefore, all needed technical components like water aeriation, biological and mechanical filtration or water circulation have been replaced either by aquarium components or by self-designed parts also using a 3D-printer. Students from different courses like mechanical engineering, smart building engineering, biology, electrical engineering, automation technology and civil engineering were involved in this project. This "miniature industrial plant" was also able to start operation and has now been running for two years successfully. Due to Corona pandemic, home office and remote online lectures, the automation of this miniature plant should be brought to a higher level in future for providing a good control over the system and water quality remotely. The aim of giving the student a chance to get to know the operation of an urban farming plant was very well achieved and the students had lots of fun in "playing" and learning with it in a realistic way.},
  language  = {en}
}
@inproceedings{SchulzeBuxlohGrossUlbrich2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz and Ulbrich, Michelle},
  title     = {Digital planning using building information modelling and virtual reality: new approach for students' remote practical training under lockdown conditions in the course of smart building engineering},
  series = {Proceedings of International Conference on Education in Mathematics, Science and Technology 2021},
  booktitle = {Proceedings of International Conference on Education in Mathematics, Science and Technology 2021},
  publisher = {ISTES Organization},
  address   = {San Antonio, TX},
  isbn      = {978-1-952092-17-6},
  pages     = {118 -- 123},
  year      = {2021},
  abstract  = {The worldwide Corona pandemic has severely restricted student projects in the higher semesters of engineering courses. In order not to delay the graduation, a new concept had to be developed for projects under lockdown conditions. Therefore, unused rooms at the university should be digitally recorded in order to develop a new usage concept as laboratory rooms. An inventory of the actual state of the rooms was done first by taking photos and listing up all flaws and peculiarities. After that, a digital site measuring was done with a 360° laser scanner and these recorded scans were linked to a coherent point cloud and transferred to a software for planning technical building services and supporting Building Information Modelling (BIM). In order to better illustrate the difference between the actual and target state, two virtual reality models were created for realistic demonstration. During the project, the students had to go through the entire digital planning phases. Technical specifications had to be complied with, as well as documentation, time planning and cost estimate. This project turned out to be an excellent alternative to on-site practical training under lockdown conditions and increased the students' motivation to deal with complex technical questions.},
  language  = {en}
}
@article{NeumaierWeissVeldemanetal.2021,
  author    = {Neumaier, Felix and Weiss, Miriam and Veldeman, Michael and Kotliar, Konstantin and Wiesmann, Martin and Schulze-Steinen, Henna and H{\"o}llig, Anke and Clusmann, Hans and Schubert, Gerrit Alexander and Albanna, Walid},
  title     = {Changes in endogenous daytime melatonin levels after aneurysmal subarachnoid hemorrhage - preliminary findings from an observational cohort study},
  series = {Clinical Neurology and Neurosurgery},
  volume    = {208},
  journal   = {Clinical Neurology and Neurosurgery},
  number    = {Article No.: 106870},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0303-8467},
  doi       = {10.1016/j.clineuro.2021.106870},
  year      = {2021},
  abstract  = {Aneurysmal subarachnoid hemorrhage (aSAH) is associated with early and delayed brain injury due to several underlying and interrelated processes, which include inflammation, oxidative stress, endothelial, and neuronal apoptosis. Treatment with melatonin, a cytoprotective neurohormone with anti-inflammatory, anti-oxidant and anti-apoptotic effects, has been shown to attenuate early brain injury (EBI) and to prevent delayed cerebral vasospasm in experimental aSAH models. Less is known about the role of endogenous melatonin for aSAH outcome and how its production is altered by the pathophysiological cascades initiated during EBI. In the present observational study, we analyzed changes in melatonin levels during the first three weeks after aSAH.},
  language  = {en}
}
@article{KuertenKotliarFuestetal.2021,
  author    = {Kuerten, David and Kotliar, Konstantin and Fuest, Matthias and Walter, Peter and Hollstein, Muriel and Plange, Niklas},
  title     = {Does hemispheric vascular regulation differ significantly in glaucoma patients with altitudinal visual field asymmetry? A single-center, prospective study},
  series = {International Ophthalmology},
  volume    = {41},
  journal   = {International Ophthalmology},
  number    = {41},
  editor    = {Neri, Piergiorgio},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {1573-2630},
  doi       = {10.1007/s10792-021-01876-0},
  pages     = {3109 -- 3119},
  year      = {2021},
  abstract  = {Purpose Vascular risk factors and ocular perfusion are heatedly discussed in the pathogenesis of glaucoma. The retinal vessel analyzer (RVA, IMEDOS Systems, Germany) allows noninvasive measurement of retinal vessel regulation. Significant differences especially in the veins between healthy subjects and patients suffering from glaucoma were previously reported. In this pilot-study we investigated if localized vascular regulation is altered in glaucoma patients with altitudinal visual field defect asymmetry. Methods 15 eyes of 12 glaucoma patients with advanced altitudinal visual field defect asymmetry were included. The mean defect was calculated for each hemisphere separately (-20.99 ± 10.49 pro- found hemispheric visual field defect vs -7.36 ± 3.97 dB less profound hemisphere). After pupil dilation, RVA measurements of retinal arteries and veins were conducted using the standard protocol. The superior and inferior retinal vessel reactivity were measured consecutively in each eye. Results Significant differences were recorded in venous vessel constriction after flicker light stimulation and overall amplitude of the reaction (p \ 0.04 and p \ 0.02 respectively) in-between the hemispheres spheres. Vessel reaction was higher in the hemisphere corresponding to the more advanced visual field defect. Arterial diameters reacted similarly, failing to reach statistical significance. Conclusion Localized retinal vessel regulation is significantly altered in glaucoma patients with asymmetri altitudinal visual field defects. Veins supplying the hemisphere concordant to a less profound visual field defect show diminished diameter changes. Vascular dysregulation might be particularly important in early glaucoma stages prior to a significant visual field defect.},
  language  = {en}
}