@inproceedings{SchreiberKraftZuendorf2017,
  author    = {Schreiber, Marc and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {Metrics Driven Research Collaboration: Focusing on Common Project Goals Continuously},
  series = {39th International Conference on Software Engineering, May 20-28, 2017 - Buenos Aires, Argentina},
  booktitle = {39th International Conference on Software Engineering, May 20-28, 2017 - Buenos Aires, Argentina},
  pages     = {8 Seiten},
  year      = {2017},
  abstract  = {Research collaborations provide opportunities for both practitioners and researchers: practitioners need solutions for difficult business challenges and researchers are looking for hard problems to solve and publish. Nevertheless, research collaborations carry the risk that practitioners focus on quick solutions too much and that researchers tackle theoretical problems, resulting in products which do not fulfill the project requirements. In this paper we introduce an approach extending the ideas of agile and lean software development. It helps practitioners and researchers keep track of their common research collaboration goal: a scientifically enriched software product which fulfills the needs of the practitioner's business model. This approach gives first-class status to application-oriented metrics that measure progress and success of a research collaboration continuously. Those metrics are derived from the collaboration requirements and help to focus on a commonly defined goal. An appropriate tool set evaluates and visualizes those metrics with minimal effort, and all participants will be pushed to focus on their tasks with appropriate effort. Thus project status, challenges and progress are transparent to all research collaboration members at any time.},
  language  = {en}
}
@article{SousaSiqueiraVerciketal.2017,
  author    = {Sousa, Marcos A. M. and Siqueira, Jose R. Jr. and Vercik, Andres and Sch{\"o}ning, Michael Josef and Oliveira, Osvaldo N. Jr.},
  title     = {Determining the optimized layer-by-layer film architecture with dendrimer/carbon nanotubes for field-effect sensors},
  series = {IEEE Sensors Journal},
  volume    = {17},
  journal   = {IEEE Sensors Journal},
  number    = {6},
  publisher = {IEEE},
  address   = {New York},
  issn      = {1558-1748},
  doi       = {10.1109/JSEN.2017.2653238},
  pages     = {1735 -- 1740},
  year      = {2017},
  abstract  = {The capacitive electrolyte-insulator-semiconductor (EIS) structure is a typical device based on a field-effect sensor platform. With a simple silicon-based structure, EIS have been useful for several sensing applications, especially with incorporation of nanostructured films to modulate the ionic transport and the flat-band potential. In this paper, we report on ion transport and changes in flat-band potential in EIS sensors made with layer-by-layer films containing poly(amidoamine) (PAMAM) dendrimer and single-walled carbon nanotubes (SWNTs) adsorbed on p-Si/SiO 2 /Ta 2 O 5 chips with an Al ohmic contact. The impedance spectra were fitted using an equivalent circuit model, from which we could determine parameters such as the double-layer capacitance. This capacitance decreased with the number of bilayers owing to space charge accumulated at the electrolyte-insulator interface, up to three PAMAM/SWNTs bilayers, after which it stabilized. The charge-transfer resistance was also minimum for three bilayers, thus indicating that this is the ideal architecture for an optimized EIS performance. The understanding of the influence of nanostructures and the fine control of operation parameters pave the way for optimizing the design and performance of new EIS sensors.},
  language  = {en}
}
@article{ArreolaOberlaenderMaetzkowetal.2017,
  author    = {Arreola, Julio and Oberl{\"a}nder, Jan and M{\"a}tzkow, M. and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Surface functionalization for spore-based biosensors with organosilanes},
  series = {Electrochimica Acta},
  volume    = {241},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2017.04.157},
  pages     = {237 -- 243},
  year      = {2017},
  abstract  = {In the present work, surface functionalization of different sensor materials was studied. Organosilanes are well known to serve as coupling agent for biomolecules or cells on inorganic materials. 3-aminopropyltriethoxysilane (APTES) was used to attach microbiological spores time to an interdigitated sensor surface. The functionality and physical properties of APTES were studied on isolated sensor materials, namely silicon dioxide (SiO2) and platinum (Pt) as well as the combined material on sensor level. A predominant immobilization of spores could be demonstrated on SiO2 surfaces. Additionally, the impedance signal of APTES-functionalized biosensor chips has been investigated.},
  language  = {en}
}
@article{OberlaenderMayerGreeffetal.2018,
  author    = {Oberl{\"a}nder, Jan and Mayer, Marlena and Greeff, Anton and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Spore-based biosensor to monitor the microbicidal efficacy of gaseous hydrogen peroxide sterilization processes},
  series = {Biosensors and Bioelectronics},
  volume    = {104},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2017.12.045},
  pages     = {87 -- 94},
  year      = {2018},
  abstract  = {In this work, a spore-based biosensor is evaluated to monitor the microbicidal efficacy of sterilization processes applying gaseous hydrogen peroxide (H2O2). The sensor is based on interdigitated electrode structures (IDEs) that have been fabricated by means of thin-film technologies. Impedimetric measurements are applied to study the effect of sterilization process on spores of Bacillus atrophaeus. This resilient microorganism is commonly used in industry to proof the sterilization efficiency. The sensor measurements are accompanied by conventional microbiological challenge tests, as well as morphological characterizations with scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The sensor measurements are correlated with the microbiological test routines. In both methods, namely the sensor-based and microbiological one, a tailing effect has been observed. The results are evaluated and discussed in a three-dimensional calibration plot demonstrating the sensor's suitability to enable a rapid process decision in terms of a successfully performed sterilization.},
  language  = {en}
}
@inproceedings{SchmidtsBoltesKraftetal.2017,
  author    = {Schmidts, Oliver and Boltes, Maik and Kraft, Bodo and Schreiber, Marc},
  title     = {Multi-pedestrian tracking by moving Bluetooth-LE beacons and stationary receivers},
  series = {2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan},
  booktitle = {2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan},
  pages     = {1 -- 4},
  year      = {2017},
  language  = {en}
}
@article{LauraDrechslerErdtetal.2018,
  author    = {Laura, C.O. and Drechsler, Klaus and Erdt, M. and Wesarg, S. and Bale, R.},
  title     = {Intervention assessment tool for primary tumors in the liver},
  series = {Current Directions in Biomedical Engineering},
  volume    = {4},
  journal   = {Current Directions in Biomedical Engineering},
  number    = {1},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2364-5504},
  doi       = {10.1515/cdbme-2018-0081},
  pages     = {337 -- 340},
  year      = {2018},
  abstract  = {After a liver tumor intervention the medical doctor has to compare both pre and postoperative CT acquisitions to ensure that all carcinogenic cells are destroyed. A correct assessment of the intervention is of vital importance, since it will reduce the probability of tumor recurrence. Some methods have been proposed to support the medical doctors during the assessment process, however, all of them focus on secondary tumors. In this paper a tool is presented that enables the outcome validation for both primary and secondary tumors. Therefore, a multiphase registration (preoperative arterial and portal phases) followed by a registration between the pre and postoperative CT images is carried out. The first registration is in charge of the primary tumors that are only visible in the arterial phase. The secondary tumors will be incorporated in the second registration step. Finally, the part of the tumor that was not covered by the necrosis is quantified and visualized. The method has been tested in 9 patients, with an average registration error of 1.41 mm.},
  language  = {en}
}
@article{HeinkeKnickerAlbracht2018,
  author    = {Heinke, Lars N. and Knicker, Axel J. and Albracht, Kirsten},
  title     = {Evaluation of passively induced shoulder stretch reflex using an isokinetic dynamometer in male overhead athletes},
  series = {Isokinetics and Exercise Science},
  volume    = {26},
  journal   = {Isokinetics and Exercise Science},
  number    = {4},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1878-5913},
  doi       = {10.3233/IES-184111},
  pages     = {265 -- 274},
  year      = {2018},
  abstract  = {BACKGROUND: Muscle stretch reflexes are widely considered to beneficially influence joint stability and power generation in the lower limbs. While in the upper limbs and especially in the muscles surrounding the shoulder joint such evidence is lacking. OBJECTIVE: To quantify the electromyographical response in the muscles crossing the shoulder of specifically trained overhead athletes to an anterior perturbation force. METHODS: Twenty healthy male participants performed six sets of different external shoulder rotation stretches on an isokinetic dynamometer over a range of amplitudes and muscle pre-activation moment levels. All stretches were applied with a dynamometer acceleration of 10,000∘/s2 and a velocity of 150∘/s. Electromyographical response was measured via sEMG. RESULTS: Consistent reflexes were not observed in all experimental conditions. The reflex latencies revealed a significant muscle main effect (F (2,228) = 99.31, p< 0.001; η2= 0.466; f= 0.934) and a pre-activation main effect (F (1,228) = 142.21, p< 0.001; η2= 0.384; f= 1.418). The stretch reflex amplitude yielded a significant pre-activation main effect (F (1,222) = 470.373, p< 0.001; η2= 0.679; f= 1.454). CONCLUSION: Short latency muscle reflexes showed a tendency to an anterior to posterior muscle recruitment whereby the main internal rotator muscles of the shoulder revealed the most consistent results.},
  language  = {en}
}
@article{BleilevensHillGrzannaetal.2019,
  author    = {Bleilevens, Christian and Hill, Aileen and Grzanna, Tim and Fechter, Tamara and Bohnen, Melanie and Weber, Hans-Joachim and Beckers, Christian and Borosch, Sebastian and Zayat, Rashad and Benstoem, Carin and Rossaint, Rolf and Goetzenich, Andreas},
  title     = {In vitro head-to-head comparison of anticoagulation properties of two heparin brands in a human blood miniature mock loop},
  series = {Interactive cardiovascular and thoracic surgery},
  volume    = {28},
  journal   = {Interactive cardiovascular and thoracic surgery},
  number    = {1},
  issn      = {1569-9285},
  doi       = {10.1093/icvts/ivy206},
  pages     = {120 -- 127},
  year      = {2019},
  language  = {en}
}
@article{KotliarLanzl2018,
  author    = {Kotliar, Konstantin and Lanzl, Ines},
  title     = {Vaskul{\"a}re Biomarker der retinalen Gef{\"a}βanalyse},
  series = {Klinische Monatsbl{\"a}tter fur Augenheilkunde},
  volume    = {235},
  journal   = {Klinische Monatsbl{\"a}tter fur Augenheilkunde},
  number    = {12},
  publisher = {Thieme},
  address   = {Stuttgart},
  issn      = {0023-2165},
  doi       = {10.1055/a-0774-7987},
  pages     = {1352 -- 1359},
  year      = {2018},
  abstract  = {Mit modernen nicht invasiven bildgebenden Verfahren lassen sich anhand der Fundusfotografie bzw. der optischen Verfilmung Aspekte der funktionellen und strukturellen retinalen Gef{\"a}ßver{\"a}nderungen objektiv untersuchen. Der Zustand und das Verhalten retinaler Gef{\"a}ße beeinflussen im pr{\"a}-, post- und kapillaren Bereich den Blutfluss und str{\"o}mungsbedingte Stoffwechselverh{\"a}ltnisse passiv und aktiv {\"u}ber den Gef{\"a}ßdurchmesser. Retinale Gef{\"a}ße gleichen von Aufbau und Funktion den zerebralen Gef{\"a}ßen und spiegeln den Zustand der Mikrozirkulation wider. Mithilfe von aus den Gef{\"a}ßweiten berechneten Biomarkern soll eine Aussage {\"u}ber die Prognose von systemischen vaskul{\"a}r bedingten Erkrankungen getroffen werden. Die statische retinale Gef{\"a}ßanalyse befasst sich mit der Untersuchung des Zustandes der pr{\"a}- und postkapillaren Gef{\"a}ßdurchmesser der retinalen Mikrozirkulation anhand einer optischen Fundusaufnahme. Bei der dynamischen retinalen Gef{\"a}ßanalyse wird der L{\"a}ngsschnitt eines retinalen Gef{\"a}ßes nicht invasiv funktionell und strukturell {\"u}ber einen Zeitraum vor, w{\"a}hrend und nach einer spezifischen vaskul{\"a}ren Stimulation untersucht. Die genaue Methodologie der Auswertung und die Bezeichnung der Parameter variieren bei unterschiedlichen Ans{\"a}tzen. Mittels retinaler Gef{\"a}ßanalyse wurden bislang mehrere klinische Querschnitts- und Interventionsstudien in der Augenheilkunde und anderen Fachgebieten, inkl. Kardiologie, Neurologie, Neurochirurgie, Nephrologie, Gyn{\"a}kologie, Sportmedizin, Diabetologie, Hypertensiologie usw. durchgef{\"u}hrt. Mit der statischen retinalen Gef{\"a}ßanalyse steht eine kosteng{\"u}nstige, reproduzierbare, nicht invasive Screeningtechnik zur Verf{\"u}gung, um eine prognostische Aussage {\"u}ber die Gef{\"a}ßgesundheit eines individuellen Patienten zu treffen. Die dynamische retinale Gef{\"a}ßanalyse besitzt ein weiteres diagnostisches Anwendungsspektrum als die statische, da sie das Verhalten retinaler Gef{\"a}ße zeitkontinuierlich untersucht. Die Evaluation vaskul{\"a}rer Erkrankungen sowie zerebro- bzw. kardiovaskul{\"a}rer Morbidit{\"a}t und Mortalit{\"a}t mittels mehrerer methodologischer Modalit{\"a}ten retinaler Gef{\"a}ßanalyse mit ihren jeweiligen quantitativen Biomarkern bietet eine zukunftstr{\"a}chtige diagnostische Perspektive. Die interdisziplin{\"a}re klinische Anwendung dieser vaskul{\"a}ren Biomarker gewinnt zunehmend an Bedeutung, sowohl in der Augenheilkunde als auch in anderen Fachgebieten.},
  language  = {de}
}
@article{ArreolaKeusgenSchoening2019,
  author    = {Arreola, Julio and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Toward an immobilization method for spore-based biosensors in oxidative environment},
  series = {Electrochimica Acta},
  volume    = {302},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.electacta.2019.01.148},
  pages     = {394 -- 401},
  year      = {2019},
  language  = {en}
}
@book{Molinnus2018,
  author    = {Molinnus, Denise},
  title     = {Integration of biomolecular logic principles with electronic transducers on a chip},
  publisher = {Philipps-Universit{\"a}t / Fachbereich Pharmazie},
  address   = {Marburg/Lahn},
  year      = {2018},
  language  = {de}
}
@inproceedings{KromeSander2018,
  author    = {Krome, Cornelia and Sander, Volker},
  title     = {Time series analysis with apache spark and its applications to energy informatics},
  series = {Proceedings of the 7th DACH+ Conference on Energy Informatics},
  booktitle = {Proceedings of the 7th DACH+ Conference on Energy Informatics},
  doi       = {10.1186/s42162-018-0043-1},
  year      = {2018},
  abstract  = {In energy economy forecasts of different time series are rudimentary. In this study, a prediction for the German day-ahead spot market is created with Apache Spark and R. It is just an example for many different applications in virtual power plant environments. Other examples of use as intraday price processes, load processes of machines or electric vehicles, real time energy loads of photovoltaic systems and many more time series need to be analysed and predicted. This work gives a short introduction into the project where this study is settled. It describes the time series methods that are used in energy industry for forecasts shortly. As programming technique Apache Spark, which is a strong cluster computing technology, is utilised. Today, single time series can be predicted. The focus of this work is on developing a method to parallel forecasting, to process multiple time series simultaneously with R and Apache Spark.},
  language  = {en}
}
@incollection{MuellerJungSchmoelzer2015,
  author    = {Mueller, Wolfram and Jung, Alexander and Schm{\"o}lzer, Bernhard},
  title     = {Der Einfluss der H{\"o}he {\"u}ber dem Meeresspiegel auf die Flugbahnen im Schispringen},
  series = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  booktitle = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  editor    = {Faulhaber, Martin and Schobersberger, Wolfgang and Schobersberger, Beatrix and Sumann, G{\"u}nther and Domej, Wolfgang},
  publisher = {{\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  address   = {Innsbruck},
  isbn      = {978-3-9501312-5-3},
  pages     = {173 -- 190},
  year      = {2015},
  language  = {de}
}
@article{MennickenPeterKaulenetal.2019,
  author    = {Mennicken, Max and Peter, Sophia Katharina and Kaulen, Corinna and Simon, Ulrich and Karth{\"a}user, Silvia},
  title     = {Controlling the Electronic Contact at the Terpyridine/Metal Interface},
  series = {The Journal of Physical Chemistry C},
  volume    = {123},
  journal   = {The Journal of Physical Chemistry C},
  number    = {35},
  issn      = {1932-7455},
  doi       = {10.1021/acs.jpcc.9b05865},
  pages     = {21367 -- 21375},
  year      = {2019},
  language  = {en}
}
@article{ArreolaKeusgenWagneretal.2019,
  author    = {Arreola, Julio and Keusgen, Michael and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Combined calorimetric gas- and spore-based biosensor array for online monitoring and sterility assurance of gaseous hydrogen peroxide in aseptic filling machines},
  series = {Biosensors and Bioelectronics},
  volume    = {143},
  journal   = {Biosensors and Bioelectronics},
  number    = {111628},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2019.111628},
  year      = {2019},
  language  = {en}
}
@phdthesis{Gossmann2015,
  author    = {Goßmann, Matthias},
  title     = {Entwicklung eines autokontraktilen Herzmuskelmodells zur funktionalen Medikamenten- und Toxinforschung},
  publisher = {Universit{\"a}tsbibliothek Duisburg-Essen},
  address   = {Duisburg ; Essen},
  year      = {2015},
  language  = {de}
}
@phdthesis{Seifarth2015,
  author    = {Seifarth, Volker},
  title     = {Ureteral tissue engineering : development of a bioreactor system and subsequent characterization of the generated biohybrids},
  publisher = {Universit{\"a}tsbibliothek Duisburg-Essen},
  address   = {Duisburg ; Essen},
  year      = {2015},
  language  = {en}
}
@phdthesis{Oflaz2012,
  author    = {Oflaz, Hakan},
  title     = {Entwicklung eines Prototypen zur Prognose von Fr{\"u}hgeburten : ein biomedizintechnischer Ansatz},
  publisher = {Deutsche Zentralbibliothek f{\"u}r Medizin},
  address   = {K{\"o}ln},
  doi       = {10.4126/38m-004639208},
  year      = {2012},
  language  = {en}
}
@phdthesis{Behbahani2011,
  author    = {Behbahani, Mehdi},
  title     = {Modeling and Simulation of Shear-Dependent Platelet Reactions in Blood Vessels and Blood-Contacting Medical Devices},
  publisher = {Verlag Dr. Hut},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8439-0134-5},
  year      = {2011},
  language  = {en}
}
@phdthesis{KurulganDemirci2012,
  author    = {Kurulgan Demirci, Eylem},
  title     = {The effect of rhAPC on contractile tension : an in-vitro sepsis model of cardiomyocytes and endothelial cells},
  year      = {2012},
  language  = {en}
}
@phdthesis{Trzewik2007,
  author    = {Trzewik, J{\"u}rgen},
  title     = {Experimental analysis of biaxial mechanical tension in cell monolayers and cultured three-dimensional tissues: the celldrum technology},
  publisher = {Univerist{\"a}tsverlg Ilmenau},
  address   = {Ilmenau},
  year      = {2007},
  language  = {en}
}
@phdthesis{Kelemen1999,
  author    = {Kelemen, Christina},
  title     = {Analyse des phasensprungartigen Einsetzens der Passage humaner Erythrozyten durch Mikropipetten bei kritischen Temperaturen},
  publisher = {Forschungszentrum, Zentralbibliothek},
  address   = {J{\"u}lich},
  year      = {1999},
  language  = {de}
}
@misc{WandreyBiselliSchroederetal.1999,
  author    = {Wandrey, Christian and Biselli, Manfred and Schr{\"o}der, Bernd and Schmoll, Hans-Joachim},
  title     = {Culturing cells on macroporous glass carriers coated with gelatin, extracellular matrix protein and stromal cells},
  pages     = {1 -- 12},
  year      = {1999},
  language  = {en}
}
@article{KromeHoeftSander2019,
  author    = {Krome, Cornelia and H{\"o}ft, Jan and Sander, Volker},
  title     = {Clustering time series applied to energy markets},
  series = {Energy Informatics},
  volume    = {2},
  journal   = {Energy Informatics},
  number    = {Article numer 17},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2520-8942},
  doi       = {10.1186/s42162-019-0076-0},
  pages     = {1 -- 20},
  year      = {2019},
  language  = {en}
}
@phdthesis{Foeckler2016,
  author    = {F{\"o}ckler, Nicole},
  title     = {Biomarker zur Prognose von Fr{\"u}hgeburten : ein biomedizintechnischer Ansatz},
  publisher = {Deutsche Zentralbibliothek f{\"u}r Medizin},
  address   = {K{\"o}ln},
  doi       = {10.4126/FRL01-006401575},
  pages     = {VII, 117 S.},
  year      = {2016},
  language  = {de}
}
@phdthesis{BassamAbduljabbar2015,
  author    = {Bassam Abduljabbar, Rasha},
  title     = {Physikalisch-chemische Steuerung der Proteinstabilit{\"a}t in biologischen Systemen},
  year      = {2015},
  language  = {de}
}
@phdthesis{Duong2015,
  author    = {Duong, Minh Tuan},
  title     = {Hyperelastic modeling and soft-tissue growth integrated with the smoothed finite element method - SFEM},
  publisher = {RWTH Aachen University},
  pages     = {174 S.},
  year      = {2015},
  language  = {en}
}
@phdthesis{Pham2011,
  author    = {Pham, Phu Tinh},
  title     = {Upper bound limit and shakedown analysis of elastic-plastic bounded linearly kinematic hardening structures},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  pages     = {140 S.},
  year      = {2011},
  language  = {en}
}
@misc{BiselliThoemmesWandrey1991,
  author    = {Biselli, Manfred and Th{\"o}mmes, J{\"o}rg and Wandrey, Christian},
  title     = {Verfahren und Vorrichtung zur Abtrennung von Ammonium aus w{\"a}ßrigen Fl{\"u}ssigkeiten [Europ{\"a}ische Patentanmeldung]},
  pages     = {1 -- 12},
  year      = {1991},
  language  = {de}
}
@misc{BiselliBornWandrey1996,
  author    = {Biselli, Manfred and Born, Christoph and Wandrey, Christian},
  title     = {Wirbelschicht-Bioreaktor mit Tr{\"a}gergranulat und daf{\"u}r geeigneter Steril-Bef{\"u}llbeh{\"a}lter [Offenlegungsschrift]},
  pages     = {1 -- 10},
  year      = {1996},
  language  = {de}
}
@book{BiselliBornSchroederetal.1997,
  author    = {Biselli, Manfred and Born, Christoph and Schr{\"o}der, Bernd and Wandrey, Christian},
  title     = {Reaktor f{\"u}r die Zellkulturtechnik mit blasenfreier Begasung},
  pages     = {10 S.},
  year      = {1997},
  language  = {de}
}
@misc{BiselliBornPapaspyrouetal.1996,
  author    = {Biselli, Manfred and Born, Christoph and Papaspyrou, Manfred and Schr{\"o}der, Bernd and Wandrey, Christian},
  title     = {Begasungs-Rohrmodul mit selektiv gasdurchl{\"a}ssiger Schlauchmembran und damit versehene Reaktoren f{\"u}r Zellkulturtechnik sowie Wirbelschicht-Reaktoren f{\"u}r Zellkultivierung [Offenlegunsschrift]},
  pages     = {1 -- 8},
  year      = {1996},
  language  = {de}
}
@misc{PapaspyrouBornBisellietal.1996,
  author    = {Papaspyrou, Manfred and Born, Christoph and Biselli, Manfred and Schr{\"o}der, Bernd},
  title     = {Verfahren zur Bestimmung von Pharmakokinetik bzw. Toxikokinetik von Testsubstanzen mit Hilfe von in-vitro-Zellkultursystemen und daf{\"u}r geeignete Vorrichtungen [Offenlegungsschrift]},
  pages     = {1 -- 10},
  year      = {1996},
  language  = {de}
}
@misc{BergerBiselliDinteretal.2000,
  author    = {Berger, Eric G. and Biselli, Manfred and Dinter, Andr{\´e} and Eisenkr{\"a}tzer, Detlef and Kiesewetter, Andr{\´e} and Zeng, Steffen},
  title     = {Chinese-Hamster-Ovary-Zellen zur Produktion von Proteinen},
  pages     = {1 -- 6},
  year      = {2000},
  language  = {de}
}
@misc{SchmidtJelinekBiselli1999,
  author    = {Schmidt, Sebastian and Jelinek, Nanni and Biselli, Manfred},
  title     = {Verfahren zur Durchf{\"u}hrung von chemischen oder biologischen Reaktionen},
  pages     = {1 -- 12},
  year      = {1999},
  language  = {de}
}
@article{QuittmannAbelAlbrachtetal.2020,
  author    = {Quittmann, Oliver J. and Abel, Thomas and Albracht, Kirsten and Meskemper, Joshua and Foitschik, Tina and Str{\"u}der, Heiko K.},
  title     = {Biomechanics of handcycling propulsion in a 30-min continuous load test at lactate threshold: Kinetics, kinematics, and muscular activity in able-bodied participants},
  series = {European Journal of Applied Physiology},
  journal   = {European Journal of Applied Physiology},
  number    = {120},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1439-6327},
  doi       = {10.1007/s00421-020-04373-x},
  pages     = {1403 -- 1415},
  year      = {2020},
  abstract  = {Purpose This study aims to investigate the biomechanics of handcycling during a continuous load trial (CLT) to assess the mechanisms underlying fatigue in upper body exercise. Methods Twelve able-bodied triathletes performed a 30-min CLT at a power output corresponding to lactate threshold in a racing recumbent handcycle mounted on a stationary ergometer. During the CLT, ratings of perceived exertion (RPE), tangential crank kinetics, 3D joint kinematics, and muscular activity of ten muscles of the upper extremity and trunk were examined using motion capturing and surface electromyography. Results During the CLT, spontaneously chosen cadence and RPE increased, whereas crank torque decreased. Rotational work was higher during the pull phase. Peripheral RPE was higher compared to central RPE. Joint range of motion decreased for elbow-flexion and radial-duction. Integrated EMG (iEMG) increased in the forearm flexors, forearm extensors, and M. deltoideus (Pars spinalis). An earlier onset of activation was found for M. deltoideus (Pars clavicularis), M. pectoralis major, M. rectus abdominis, M. biceps brachii, and the forearm flexors. Conclusion Fatigue-related alterations seem to apply analogously in handcycling and cycling. The most distal muscles are responsible for force transmission on the cranks and might thus suffer most from neuromuscular fatigue. The findings indicate that peripheral fatigue (at similar lactate values) is higher in handcycling compared to leg cycling, at least for inexperienced participants. An increase in cadence might delay peripheral fatigue by a reduced vascular occlusion. We assume that the gap between peripheral and central fatigue can be reduced by sport-specific endurance training.},
  language  = {en}
}
@inproceedings{PohleFroehlichDalitzRichteretal.2020,
  author    = {Pohle-Fr{\"o}hlich, Regina and Dalitz, Christoph and Richter, Charlotte and Hahnen, Tobias and St{\"a}udle, Benjamin and Albracht, Kirsten},
  title     = {Estimation of muscle fascicle orientation in ultrasonic images},
  series = {Proceedings of the 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - Volume 5},
  booktitle = {Proceedings of the 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - Volume 5},
  publisher = {SciTePress},
  address   = {Set{\´u}bal, Portugal},
  isbn      = {978-989-758-402-2},
  doi       = {10.5220/0008933900790086},
  pages     = {79 -- 86},
  year      = {2020},
  abstract  = {We compare four different algorithms for automatically estimating the muscle fascicle angle from ultrasonic images: the vesselness filter, the Radon transform, the projection profile method and the gray level cooccurence matrix (GLCM). The algorithm results are compared to ground truth data generated by three different experts on 425 image frames from two videos recorded during different types of motion. The best agreement with the ground truth data was achieved by a combination of pre-processing with a vesselness filter and measuring the angle with the projection profile method. The robustness of the estimation is increased by applying the algorithms to subregions with high gradients and performing a LOESS fit through these estimates.},
  language  = {en}
}
@article{DantismRoehlenDahmenetal.2020,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Dahmen, Markus and Wagner, Torsten and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {LAPS-based monitoring of metabolic responses of bacterial cultures in a paper fermentation broth},
  series = {Sensors and Actuators B: Chemical},
  volume    = {320},
  journal   = {Sensors and Actuators B: Chemical},
  number    = {Art. 128232},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2020.128232},
  year      = {2020},
  abstract  = {As an alternative renewable energy source, methane production in biogas plants is gaining more and more attention. Biomass in a bioreactor contains different types of microorganisms, which should be considered in terms of process-stability control. Metabolically inactive microorganisms within the fermentation process can lead to undesirable, time-consuming and cost-intensive interventions. Hence, monitoring of the cellular metabolism of bacterial populations in a fermentation broth is crucial to improve the biogas production, operation efficiency, and sustainability. In this work, the extracellular acidification of bacteria in a paper-fermentation broth is monitored after glucose uptake, utilizing a differential light-addressable potentiometric sensor (LAPS) system. The LAPS system is loaded with three different model microorganisms (Escherichia coli, Corynebacterium glutamicum, and Lactobacillus brevis) and the effect of the fermentation broth at different process stages on the metabolism of these bacteria is studied. In this way, different signal patterns related to the metabolic response of microorganisms can be identified. By means of calibration curves after glucose uptake, the overall extracellular acidification of bacterial populations within the fermentation process can be evaluated.},
  language  = {en}
}
@article{MalikAbdievaUalievaetal.2019,
  author    = {Malik, A. M. and Abdieva, G. Zh. and Ualieva, P. S. and Zhubanova, A. A. and Temiz Artmann, Ayseg{\"u}l},
  title     = {CКPИНИНГ МИКPOOPГAНИЗМOВ-ДECТPУКТOPOВ XЛOРOPГAНИЧECКИX ЗAГPЯЗНИТEЛEЙ},
  series = {Eurasian Journal of Ecology},
  volume    = {61},
  journal   = {Eurasian Journal of Ecology},
  number    = {4},
  issn      = {2617-7358},
  pages     = {61 -- 71},
  year      = {2019},
  language  = {ru}
}
@article{RoethSlabuKessleretal.2019,
  author    = {Roeth, A.A. and Slabu, I. and Kessler, A. and Engelmann, Ulrich M.},
  title     = {Local treatment of pancreatic cancer with magnetic nanoparticles},
  series = {HPB},
  volume    = {21},
  journal   = {HPB},
  number    = {Supplement 3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1365-182X},
  doi       = {10.1016/j.hpb.2019.10.959},
  pages     = {S868 -- S869},
  year      = {2019},
  language  = {en}
}
@article{WeldenSchoeningWagneretal.2020,
  author    = {Welden, Rene and Sch{\"o}ning, Michael Josef and Wagner, Patrick H. and Wagner, Torsten},
  title     = {Light-Addressable Electrodes for Dynamic and Flexible Addressing of Biological Systems and Electrochemical Reactions},
  series = {Sensors},
  volume    = {20},
  journal   = {Sensors},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s20061680},
  pages     = {Artikel 1680},
  year      = {2020},
  abstract  = {In this review article, we are going to present an overview on possible applications of light-addressable electrodes (LAE) as actuator/manipulation devices besides classical electrode structures. For LAEs, the electrode material consists of a semiconductor. Illumination with a light source with the appropiate wavelength leads to the generation of electron-hole pairs which can be utilized for further photoelectrochemical reaction. Due to recent progress in light-projection technologies, highly dynamic and flexible illumination patterns can be generated, opening new possibilities for light-addressable electrodes. A short introduction on semiconductor-electrolyte interfaces with light stimulation is given together with electrode-design approaches. Towards applications, the stimulation of cells with different electrode materials and fabrication designs is explained, followed by analyte-manipulation strategies and spatially resolved photoelectrochemical deposition of different material types.},
  language  = {en}
}
@article{JildehKirchnerOberlaenderetal.2020,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Oberl{\"a}nder, Jan and Vahidpour, Farnoosh and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Development of a package-sterilization process for aseptic filling machines: A numerical approach and validation for surface treatment with hydrogen peroxide},
  series = {Sensor and Actuators A: Physical},
  volume    = {303},
  journal   = {Sensor and Actuators A: Physical},
  number    = {111691},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-4247},
  doi       = {10.1016/j.sna.2019.111691},
  year      = {2020},
  abstract  = {Within the present work a sterilization process by a heated gas mixture that contains hydrogen peroxide (H₂O₂) is validated by experiments and numerical modeling techniques. The operational parameters that affect the sterilization efficacy are described alongside the two modes of sterilization: gaseous and condensed H₂O₂. Measurements with a previously developed H₂O₂ gas sensor are carried out to validate the applied H₂O₂ gas concentration during sterilization. We performed microbiological tests at different H₂O₂ gas concentrations by applying an end-point method to carrier strips, which contain different inoculation loads of Geobacillus stearothermophilus spores. The analysis of the sterilization process of a pharmaceutical glass vial is performed by numerical modeling. The numerical model combines heat- and advection-diffusion mass transfer with vapor-pressure equations to predict the location of condensate formation and the concentration of H₂O₂ at the packaging surfaces by changing the gas temperature. For a sterilization process of 0.7 s, a H₂O₂ gas concentration above 4\% v/v is required to reach a log-count reduction above six. The numerical results showed the location of H₂O₂ condensate formation, which decreases with increasing sterilant-gas temperature. The model can be transferred to different gas nozzle- and packaging geometries to assure the absence of H₂O₂ residues.},
  language  = {en}
}
@inproceedings{HingleyDikta2019,
  author    = {Hingley, Peter and Dikta, Gerhard},
  title     = {Finding a well performing box-jenkins forecasting model for annualised patent filings counts},
  series = {International Symposium on Forecasting, Thessaloniki, Greece, June 2019},
  booktitle = {International Symposium on Forecasting, Thessaloniki, Greece, June 2019},
  pages     = {24 Folien},
  year      = {2019},
  language  = {en}
}
@article{AttarMerkKotliaretal.2019,
  author    = {Attar, Mandana Hossein Zadeh and Merk, Hans F. and Kotliar, Konstantin and Wurpts, Gerda and R{\"o}seler, Stefani and Moll-Slodowy, Silke and Plange, Johann and Baron, Jens Malte and Balakirski, Galina},
  title     = {The CD63 basophil activation test as a diagnostic tool for assessing autoimmunity in patients with chronic spontaneous urticaria},
  series = {European Journal of Dermatology},
  volume    = {29},
  journal   = {European Journal of Dermatology},
  number    = {6},
  doi       = {10.1684/ejd.2019.3680},
  pages     = {614 -- 618},
  year      = {2019},
  language  = {en}
}
@article{MennickenPeterKaulenetal.2020,
  author    = {Mennicken, Max and Peter, Sophia K. and Kaulen, Corinna and Simon, Ulrich and Karth{\"a}user, Silvia},
  title     = {Transport through Redox-Active Ru-Terpyridine Complexes Integrated in Single Nanoparticle Devices},
  series = {The Journal of Physical Chemistry C},
  volume    = {124},
  journal   = {The Journal of Physical Chemistry C},
  number    = {8},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {1932-7455},
  doi       = {10.1021/acs.jpcc.9b11716},
  pages     = {4881 -- 4889},
  year      = {2020},
  abstract  = {Transition metal complexes are electrofunctional molecules due to their high conductivity and their intrinsic switching ability involving a metal-to-ligand charge transfer. Here, a method is presented to contact reliably a few to single redox-active Ru-terpyridine complexes in a CMOS compatible nanodevice and preserve their electrical functionality. Using hybrid materials from 14 nm gold nanoparticles (AuNP) and bis-{4′-[4-(mercaptophenyl)-2,2′:6′,2″-terpyridine]}-ruthenium(II) complexes a device size of 30² nm² inclusive nanoelectrodes is achieved. Moreover, this method bears the opportunity for further downscaling. The Ru-complex AuNP devices show symmetric and asymmetric current versus voltage curves with a hysteretic characteristic in two well separated conductance ranges. By theoretical approximations based on the single-channel Landauer model, the charge transport through the formed double-barrier tunnel junction is thoroughly analyzed and its sensibility to the molecule/metal contact is revealed. It can be verified that tunneling transport through the HOMO is the main transport mechanism while decoherent hopping transport is present to a minor extent.},
  language  = {en}
}
@article{PilasSelmerKeusgenetal.2019,
  author    = {Pilas, Johanna and Selmer, Thorsten and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Screen-printed carbon electrodes modified with graphene oxide for the design of a reagent-free NAD+-dependent biosensor array},
  series = {Analytical Chemistry},
  volume    = {91},
  journal   = {Analytical Chemistry},
  number    = {23},
  publisher = {ACS Publications},
  address   = {Washington},
  doi       = {10.1021/acs.analchem.9b04481},
  pages     = {15293 -- 15299},
  year      = {2019},
  language  = {en}
}
@article{GrundlachBaumannEngelmann2021,
  author    = {Grundlach, Michael and Baumann, Martin and Engelmann, Ulrich M.},
  title     = {How Multimodal Examinations Can Increase Sustainable Student Gain by Aligning Teaching and Assessment},
  series = {Current Directions in Biomedical Engineering},
  volume    = {7},
  journal   = {Current Directions in Biomedical Engineering},
  number    = {7/2},
  editor    = {D{\"o}ssel, Olaf},
  publisher = {De Gruyter},
  address   = {Berlin},
  isbn      = {2364-5504},
  doi       = {10.1515/cdbme-2021-2019},
  pages     = {73 -- 76},
  year      = {2021},
  abstract  = {Modern industry and multi-discipline projects require highly trained individuals with resilient science and engineering back-grounds. Graduates must be able to agilely apply excellent theoretical knowledge in their subject matter as well as essential practical "hands-on" knowledge of diverse working processes to solve complex problems. To meet these demands, university education follows the concept of Constructive Alignment and thus increasingly adopts the teaching of necessary practical skills to the actual industry requirements and assessment routines. However, a systematic approach to coherently align these three central teaching demands is strangely absent from current university curricula. We demonstrate the feasibility of implementing practical assessments in a regular theory-based examination, thus defining the term "blended assessment". We assessed a course for natural science and engineering students pursuing a career in biomedical engineering, and evaluated the benefit of blended assessment exams for students and lecturers. Our controlled study assessed the physiological background of electrocardiograms (ECGs), the practical measurement of ECG curves, and their interpretation of basic pathologic alterations. To study on long time effects, students have been assessed on the topic twice with a time lag of 6 months. Our findings suggest a significant improvement in student gain with respect to practical skills and theoretical knowledge. The results of the reassessments support these outcomes. From the lecturers' point of view, blended assessment complements practical training courses while keeping organizational effort manageable. We consider blended assessment a viable tool for providing an improved student gain, industry-ready education format that should be evaluated and established further to prepare university graduates optimally for their future careers.},
  language  = {en}
}
@article{PoettgenEdererAltherretal.2015,
  author    = {P{\"o}ttgen, Philipp and Ederer, Thorsten and Altherr, Lena and Pelz, Peter F.},
  title     = {Developing a control strategy for booster stations under uncertain load},
  series = {Applied Mechanics and Materials},
  volume    = {807},
  journal   = {Applied Mechanics and Materials},
  number    = {807},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  isbn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.807.241},
  pages     = {241 -- 246},
  year      = {2015},
  abstract  = {Booster stations can fulfill a varying pressure demand with high energy-efficiency, because individual pumps can be deactivated at smaller loads. Although this is a seemingly simple approach, it is not easy to decide precisely when to activate or deactivate pumps. Contemporary activation controls derive the switching points from the current volume flow through the system. However, it is not measured directly for various reasons. Instead, the controller estimates the flow based on other system properties. This causes further uncertainty for the switching decision. In this paper, we present a method to find a robust, yet energy-efficient activation strategy.},
  language  = {en}
}
@inproceedings{BuesgenKloeserKohletal.2022,
  author    = {B{\"u}sgen, Andr{\´e} and Kl{\"o}ser, Lars and Kohl, Philipp and Schmidts, Oliver and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {Exploratory analysis of chat-based black market profiles with natural language processing},
  series = {Proceedings of the 11th International Conference on Data Science, Technology and Applications},
  booktitle = {Proceedings of the 11th International Conference on Data Science, Technology and Applications},
  isbn      = {978-989-758-583-8},
  issn      = {2184-285X},
  doi       = {10.5220/0011271400003269},
  pages     = {83 -- 94},
  year      = {2022},
  abstract  = {Messenger apps like WhatsApp or Telegram are an integral part of daily communication. Besides the various positive effects, those services extend the operating range of criminals. Open trading groups with many thousand participants emerged on Telegram. Law enforcement agencies monitor suspicious users in such chat rooms. This research shows that text analysis, based on natural language processing, facilitates this through a meaningful domain overview and detailed investigations. We crawled a corpus from such self-proclaimed black markets and annotated five attribute types products, money, payment methods, user names, and locations. Based on each message a user sends, we extract and group these attributes to build profiles. Then, we build features to cluster the profiles. Pretrained word vectors yield better unsupervised clustering results than current state-of-the-art transformer models. The result is a semantically meaningful high-level overview of the user landscape of black market chatrooms. Additionally, the extracted structured information serves as a foundation for further data exploration, for example, the most active users or preferred payment methods.},
  language  = {en}
}
@book{Engelmann2022,
  author    = {Engelmann, Ulrich M.},
  title     = {Zielf{\"u}hrend moderieren},
  publisher = {UVK Verlag},
  address   = {Stuttgart},
  isbn      = {9783838556895},
  doi       = {10.36198/9783838556895},
  pages     = {438 S.},
  year      = {2022},
  abstract  = {In der Teamarbeit wird Moderation zum Erfolgsfaktor, der jedoch h{\"a}ufig untersch{\"a}tzt wird. Ausgehend vom pers{\"o}nlichen Kompetenzniveau verkn{\"u}pft dieses Buch Grundlagen und Methoden zu Wegen, um Ihre pers{\"o}nliche Entwicklung individuell zu begleiten: Neulinge finden hilfreiche Checklisten und Basistechniken f{\"u}r ihre ersten Moderationen, Fortgeschrittene wertvolle Praxistipps und Methoden f{\"u}r den Ausbau ihrer Moderationskompetenz. Profis schließlich genießen eine raffinierte Aussicht auf weniger bekannte Techniken und neue Anwendungen. Weiterf{\"u}hrende Exkurse zum Meeting-Management und zur Online-Moderation runden den Anwendungshorizont ab. Ob in Beruf, Studium oder Ehrenamt - derart ausgestattet gelingen Ihre eigene sowie die Entwicklung Ihres Teams durch zielf{\"u}hrende Moderationen.},
  language  = {de}
}