@article{MiyamotoItabashiWagneretal.2014,
  author    = {Miyamoto, Ko-ichiro and Itabashi, Akinori and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {High-speed chemical imaging inside a microfluidic channel},
  series = {Sensors and actuators. B: Chemical},
  volume    = {194},
  journal   = {Sensors and actuators. B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2013.12.090},
  pages     = {521 -- 527},
  year      = {2014},
  abstract  = {In this study, a high-speed chemical imaging system was developed for visualization of the interior of a microfluidic channel. A microfluidic channel was constructed on the sensor surface of the light-addressable potentiometric sensor (LAPS), on which the ion concentrations could be measured in parallel at up to 64 points illuminated by optical fibers. The temporal change of pH distribution inside the microfluidic channel was recorded at a maximum rate of 100 frames per second (fps). The high frame rate allowed visualization of moving interfaces and plugs in the channel even at a flow velocity of 111 mm/s, which suggests the feasibility of plug-based microfluidic devices for flow-injection analysis (FIA).},
  language  = {en}
}
@article{GoedhuysJanzMohnen2014,
  author    = {Goedhuys, Micheline and Janz, Norbert and Mohnen, Pierre},
  title     = {Knowledge-based productivity in "low-tech" industries: evidence from firms in developing countries},
  series = {Industrial and corporate change},
  volume    = {23},
  journal   = {Industrial and corporate change},
  number    = {1},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1464-3650 (E-Journal); 0960-6491 (Print)},
  doi       = {10.1093/icc/dtt006},
  pages     = {1 -- 23},
  year      = {2014},
  abstract  = {Using firm-level data from five developing countries—Brazil, Ecuador, South Africa, Tanzania, and Bangladesh—and three industries—food processing, textiles, and the garments and leather products—this article examines the importance of various sources of knowledge for explaining productivity and formally tests whether sector- or country-specific characteristics dominate these relationships. Knowledge sources driving productivity appear mainly sector specific. Also differences in the level of development affect the effectiveness of knowledge sources. In the food processing sector, firms with higher educated managers are more productive, and in least-developed countries, additionally those with technology licenses and imported machinery and equipment. In the capital-intensive textiles sector, productivity is higher in firms that conduct R\&D. In the garments and leather products sector, higher education of the managers, licensing, and R\&D raise productivity.},
  language  = {en}
}
@article{Timme2014,
  author    = {Timme, Michael},
  title     = {BGH: Geltendmachung von Sachm{\"a}ngeln bei Wohnungseigentum},
  series = {LMK : Fachdienst Zivilrecht : Kommentierte BGH-Rechtsprechung},
  volume    = {2014},
  journal   = {LMK : Fachdienst Zivilrecht : Kommentierte BGH-Rechtsprechung},
  number    = {5},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {1611-1095},
  year      = {2014},
  language  = {de}
}
@article{FiedlerHennMelcher2014,
  author    = {Fiedler, Gerda and Henn, Gudrun and Melcher, Karin},
  title     = {ANPAK - ein semesterbegleitender Anpassungskurs},
  series = {Zeitschrift f{\"u}r Hochschulentwicklung},
  volume    = {9},
  journal   = {Zeitschrift f{\"u}r Hochschulentwicklung},
  number    = {4},
  publisher = {{\"O}GHD},
  address   = {Wien},
  issn      = {2219-6994},
  pages     = {85 -- 100},
  year      = {2014},
  abstract  = {In Folge mehrj{\"a}hriger statistischer Untersuchungen an der FH Aachen ist unter anderem ein Eingangstest entstanden, der als Diagnosetool f{\"u}r einen erfolgreichen Studieneinstieg verwendet wird. Es hat sich herausgestellt, dass ein Testergebnis von weniger als 25 (von maximal 56 erreichbaren) Punkten die Chance auf einen erfolgreichen Studieneinstieg deutlich verringert. Ungef{\"a}hr die H{\"a}lfte aller Erstsemester hat weniger als 25 Punkte im Eingangstest. Weniger als 20 \% dieser Gruppe bestehen innerhalb eines Jahres die Klausur Mathematik 1. Die investierte Zeit von zwei Semestern ist mit Blick auf den Wissenszuwachs und damit letztendlich den Studienerfolg nicht effizient genutzt. Deshalb haben wir im WS 2013/14 einen semesterbegleitenden Anpassungskurs f{\"u}r diese Gruppe installiert. Ziel eines solchen Kurses ist es, die Student/innen innerhalb eines Jahres in die Lage zu versetzen, nach zwei Semestern problemlos den Vorlesungen in Mathematik zu folgen. Dieser Artikel beschreibt das Konzept dieses Anpassungskurses und zeigt erste Ergebnisse und Probleme des Pilotdurchgangs auf.},
  language  = {de}
}
@article{NachtrodtTietschMostaccietal.2014,
  author    = {Nachtrodt, Frederik and Tietsch, Wolfgang and Mostacci, Domiziano and Scherer, Ulrich W.},
  title     = {Set-up and first operation of a plasma oven for treatment of low level radioactive wastes},
  series = {Nuclear technology and radiation protection},
  volume    = {29},
  journal   = {Nuclear technology and radiation protection},
  number    = {Suppl.},
  publisher = {VINČA Institute of Nuclear Sciences},
  address   = {Belgrad},
  issn      = {1451-3994},
  doi       = {10.2298/NTRP140SS47N},
  pages     = {47 -- 51},
  year      = {2014},
  language  = {en}
}
@article{SrivastavaLahiriMaitietal.2014,
  author    = {Srivastava, A. and Lahiri, S. and Maiti, M. and Knolle, F. and Hoyler, Friedrich and Scherer, Ulrich W. and Schnug, E. W.},
  title     = {Study of naturally occurring radioactive material (NORM) in top soil of Punjab State from the North Western part of India},
  series = {Journal of Radioanalytical and Nuclear Chemistry},
  volume    = {2014},
  journal   = {Journal of Radioanalytical and Nuclear Chemistry},
  number    = {302},
  publisher = {Springer Nature},
  address   = {Basel},
  issn      = {1588-2780 (E-Journal); 0022-4081 (Print); 0134-0719 (Print); 0236-5731 (Print); 1417-2097 (Print)},
  doi       = {0.1007/s10967-014-3450-1},
  pages     = {1049 -- 1052},
  year      = {2014},
  language  = {en}
}
@article{SiqueiraMolinnusBegingetal.2014,
  author    = {Siqueira, Jose R. and Molinnus, Denise and Beging, Stefan and Sch{\"o}ning, Michael Josef},
  title     = {Incorporating a hybrid urease-carbon nanotubes sensitive nanofilm on capacitive field-effect sensors for urea detection},
  series = {Analytical chemistry},
  volume    = {86},
  journal   = {Analytical chemistry},
  number    = {11},
  publisher = {ACS Publications},
  address   = {Columbus},
  issn      = {1520-6882 (E-Journal); 0003-2700 (Print); 0096-4484 (Print)},
  doi       = {10.1021/ac500458s},
  pages     = {5370 -- 5375},
  year      = {2014},
  abstract  = {The ideal combination among biomolecules and nanomaterials is the key for reaching biosensing units with high sensitivity. The challenge, however, is to find out a stable and sensitive film architecture that can be incorporated on the sensor's surface. In this paper, we report on the benefits of incorporating a layer-by-layer (LbL) nanofilm of polyamidoamine (PAMAM) dendrimer and carbon nanotubes (CNTs) on capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensors for detecting urea. Three sensor arrangements were studied in order to investigate the adequate film architecture, involving the LbL film with the enzyme urease: (i) urease immobilized directly onto a bare EIS [EIS-urease] sensor; (ii) urease atop the LbL film over the EIS [EIS-(PAMAM/CNT)-urease] sensor; and (iii) urease sandwiched between the LbL film and another CNT layer [EIS-(PAMAM/CNT)-urease-CNT]. The surface morphology of all three urea-based EIS biosensors was investigated by atomic force microscopy (AFM), while the biosensing abilities were studied by means of capacitance-voltage (C/V) and dynamic constant-capacitance (ConCap) measureaments at urea concentrations ranging from 0.1 mM to 100 mM. The EIS-urease and EIS-(PAMAM/CNT)-urease sensors showed similar sensitivity (∼18 mV/decade) and a nonregular signal behavior as the urea concentration increased. On the other hand, the EIS-(PAMAM/CNT)-urease-CNT sensor exhibited a superior output signal performance and higher sensitivity of about 33 mV/decade. The presence of the additional CNT layer was decisive to achieve a urea based EIS sensor with enhanced properties. Such sensitive architecture demonstrates that the incorporation of an adequate hybrid enzyme-nanofilm as sensing unit opens new prospects for biosensing applications using the field-effect sensor platform.},
  language  = {en}
}
@article{MuribYeapMartensetal.2014,
  author    = {Murib, Mohammed Sharif and Yeap, Weng-Siang and Martens, Daan and Bienstman, Peter and Ceuninck, Ward de and Grinsven, Bart van and Sch{\"o}ning, Michael Josef and Michiels, Luc and Haenen, Ken and Ameloot, Marcel and Serpeng{\"u}zel, Ali and Wagner, Patrick},
  title     = {Photonic detection and characterization of DNA using sapphire microspheres},
  series = {Journal of biomedical optics},
  volume    = {19},
  journal   = {Journal of biomedical optics},
  number    = {9},
  publisher = {SPIE},
  address   = {Bellingham},
  issn      = {1560-2281 (E-Journal); 1083-3668 (Print)},
  doi       = {10.1117/1.JBO.19.9.097006},
  pages     = {097006},
  year      = {2014},
  abstract  = {A microcavity-based deoxyribonucleic acid (DNA) optical biosensor is demonstrated for the first time using synthetic sapphire for the optical cavity. Transmitted and elastic scattering intensity at 1510 nm are analyzed from a sapphire microsphere (radius 500  μm, refractive index 1.77) on an optical fiber half coupler. The 0.43 nm angular mode spacing of the resonances correlates well with the optical size of the sapphire sphere. Probe DNA consisting of a 36-mer fragment was covalently immobilized on a sapphire microsphere and hybridized with a 29-mer target DNA. Whispering gallery modes (WGMs) were monitored before the sapphire was functionalized with DNA and after it was functionalized with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). The shift in WGMs from the surface modification with DNA was measured and correlated well with the estimated thickness of the add-on DNA layer. It is shown that ssDNA is more uniformly oriented on the sapphire surface than dsDNA. In addition, it is shown that functionalization of the sapphire spherical surface with DNA does not affect the quality factor (Q≈104) of the sapphire microspheres. The use of sapphire is especially interesting because this material is chemically resilient, biocompatible, and widely used for medical implants.},
  language  = {en}
}
@article{GuoMiyamotoWagneretal.2014,
  author    = {Guo, Yuanyuan and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Device simulation of the light-addressable potentiometric sensor for the investigation of the spatial resolution},
  series = {Sensors and actuators B: Chemical},
  volume    = {204},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2014.08.016},
  pages     = {659 -- 665},
  year      = {2014},
  abstract  = {As a semiconductor-based electrochemical sensor, the light-addressable potentiometric sensor (LAPS) can realize two dimensional visualization of (bio-)chemical reactions at the sensor surface addressed by localized illumination. Thanks to this imaging capability, various applications in biochemical and biomedical fields are expected, for which the spatial resolution is critically significant. In this study, therefore, the spatial resolution of the LAPS was investigated in detail based on the device simulation. By calculating the spatiotemporal change of the distributions of electrons and holes inside the semiconductor layer in response to a modulated illumination, the photocurrent response as well as the spatial resolution was obtained as a function of various parameters such as the thickness of the Si substrate, the doping concentration, the wavelength and the intensity of illumination. The simulation results verified that both thinning the semiconductor substrate and increasing the doping concentration could improve the spatial resolution, which were in good agreement with known experimental results and theoretical analysis. More importantly, new findings of interests were also obtained. As for the dependence on the wavelength of illumination, it was found that the known dependence was not always the case. When the Si substrate was thick, a longer wavelength resulted in a higher spatial resolution which was known by experiments. When the Si substrate was thin, however, a longer wavelength of light resulted in a lower spatial resolution. This finding was explained as an effect of raised concentration of carriers, which reduced the thickness of the space charge region. The device simulation was found to be helpful to understand the relationship between the spatial resolution and device parameters, to understand the physics behind it, and to optimize the device structure and measurement conditions for realizing higher performance of chemical imaging systems.},
  language  = {en}
}
@article{KhaydukovaZadorozhnayaKirsanovetal.2014,
  author    = {Khaydukova, M. M. and Zadorozhnaya, O. A. and Kirsanov, D. O. and Iken, Heiko and Rolka, David and Sch{\"o}ning, Michael Josef and Babain, V. A. and Vlasov, Yu. G. and Legin, A. V.},
  title     = {Multivariate processing of atomic-force microscopy images for detection of the response of plasticized polymeric membranes},
  series = {Russian journal of applied chemistry},
  volume    = {87},
  journal   = {Russian journal of applied chemistry},
  number    = {3},
  publisher = {Springer},
  address   = {Dordrecht},
  issn      = {1608-3296 (E-Journal); 1070-4272 (Print)},
  doi       = {10.1134/S1070427214030112},
  pages     = {307 -- 314},
  year      = {2014},
  abstract  = {The possibility of using the atomic-force microscopy as a method for detection of the analytical signal from plasticized polymeric sensor membranes was analyzed. The surfaces of cadmium-selective membranes based on two polymeric matrices were examined. The digital images were processed with multivariate image analysis techniques. A correlation was found between the surface profile of an ion-selective membrane and the concentration of the ion in solution.},
  language  = {en}
}
@article{MuellerHirschfeldLambertzetal.2014,
  author    = {M{\"u}ller, Martin and Hirschfeld, Julian and Lambertz, Rita and Schulze Lohoff, Andreas and Lustfeld, Hans and Pfeifer, Heinz and Reißel, Martin},
  title     = {Validation of a novel method for detecting and stabilizing malfunctioning areas in fuel cell stacks},
  series = {Journal of power sources},
  volume    = {272},
  journal   = {Journal of power sources},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2755 (E-Journal); 0378-7753 (Print)},
  doi       = {10.1016/j.jpowsour.2014.08.045},
  pages     = {225 -- 232},
  year      = {2014},
  abstract  = {In this paper a setup for detecting malfunctioning areas of MEAs in fuel cell stacks is described. Malfunctioning areas generate electric cross currents inside bipolar plates. To exploit this we suggest bipolar plates consisting not of two but of three layers. The third one is a highly conducting layer and segmented such that the cross currents move along the segments to the surface of the stack where they can be measured by an inductive sensor. With this information a realistic model can be used to detect the malfunctioning area. Furthermore the third layer will prevent any current inhomogeneity of a malfunctioning cell to spread to neighbouring cells in the stack. In this work the results of measurements in a realistic cell setup will be compared with the results obtained in simulation studies with the same configuration. The basis for the comparison is the reliable characterisation of the electrical properties of the cell components and the implication of these results into the simulation model. The experimental studies will also show the limits in the maximum number of segments, which can be used for a reliable detection of cross currents.},
  language  = {en}
}
@article{StadlerGarveyEmbsetal.2014,
  author    = {Stadler, Alexander Maximilian and Garvey, Christopher J. and Embs, Jan Peter and Koza, Michael Marek and Unruh, Tobias and Artmann, Gerhard and Zaccai, Guiseppe},
  title     = {Picosecond dynamics in haemoglobin from different species: A quasielastic neutron scattering study},
  series = {Biochimica et biophysica acta (BBA): General Subjects},
  volume    = {1840},
  journal   = {Biochimica et biophysica acta (BBA): General Subjects},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-8006 (E-Journal); 0304-4165 (Print)},
  doi       = {10.1016/j.bbagen.2014.06.007},
  pages     = {2989 -- 2999},
  year      = {2014},
  language  = {en}
}
@article{MalechaKlubertHeinenFuchs2014,
  author    = {Malecha, Hartmut and Klubert, J. and Heinen-Fuchs, Sabine},
  title     = {Laserscanning passe? 3-D-Oberfl{\"a}chenmodelle aus Bilddaten und deren messtechnischer Nutzen},
  series = {Wasserwirtschaft},
  volume    = {Jg. 104},
  journal   = {Wasserwirtschaft},
  number    = {Nr. 9},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {32 -- 35},
  year      = {2014},
  language  = {de}
}
@article{RatkeMilowLisinskietal.2014,
  author    = {Ratke, Lorenz and Milow, Barbara and Lisinski, Susanne and Hoepfner, Sandra},
  title     = {On an effect of fine ceramic particles on the structure of aerogels},
  series = {Microgravity science and technology},
  volume    = {26},
  journal   = {Microgravity science and technology},
  publisher = {Springer Nature},
  address   = {Heidelberg},
  issn      = {0938-0108 ; 1875-0494},
  doi       = {10.1007/s12217-014-9380-2},
  pages     = {103 -- 110},
  year      = {2014},
  language  = {en}
}
@article{Balzer2014,
  author    = {Balzer, Hermann},
  title     = {Ausgestaltung und Steuerung des Netzes von Bankbeziehungen - Update nach 25 Jahren mithilfe einer explorativen Unternehmensbefragung / Arbeitskreis Finanzierung der Schmalenbach-Gesellschaft e.V. unter Mitarb. von Prof. Dr. Hermann Balzer...},
  series = {Zfbf : Schmalenbachs Zeitschrift f{\"u}r betriebswirtschaftliche Forschung},
  journal   = {Zfbf : Schmalenbachs Zeitschrift f{\"u}r betriebswirtschaftliche Forschung},
  number    = {H. 8},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  issn      = {0341-2687},
  pages     = {694 -- 723},
  year      = {2014},
  language  = {de}
}
@article{GuoSekiMiyamotoetal.2014,
  author    = {Guo, Yuanyuan and Seki, Kosuke and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Device simulation of the light-addressable potentiometric sensor with a novel photoexcitation method for a higher spatial resolution},
  series = {Procedia Engineering},
  volume    = {87},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2014.11.369},
  pages     = {456 -- 459},
  year      = {2014},
  abstract  = {A novel photoexcitation method for the light-addressable potentiometric sensor (LAPS) realized a higher spatial resolution of chemical imaging. In this method, a modulated light probe, which generates the alternating photocurrent signal, is surrounded by a ring of constant light, which suppresses the lateral diffusion of photocarriers by enhancing recombination. A device simulation verified that a higher spatial resolution could be obtained by adjusting the gap between the modulated and constant light. It was also found that a higher intensity and a longer wavelength of constant light was more effective. However, there exists a tradeoff between the spatial resolution and the amplitude of the photocurrent, and thus, the signal-to-noise ratio. A tilted incidence of constant light was applied, which could achieve even higher resolution with a smaller loss of photocurrent.},
  language  = {en}
}
@article{MiyamotoSekiWagneretal.2014,
  author    = {Miyamoto, K. and Seki, K. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, T.},
  title     = {Enhancement of the spatial resolution of the chemical imaging sensor by a hybrid fiber-optic illumination},
  series = {Procedia Engineering},
  volume    = {87},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2014.11.563},
  pages     = {612 -- 615},
  year      = {2014},
  abstract  = {The chemical imaging sensor, which is based on the principle of the light-addressable potentiometric sensor (LAPS), is a powerful tool to visualize the spatial distribution of chemical species on the sensor surface. The spatial resolution of this sensor depends on the diffusion of photocarriers excited by a modulated light. In this study, a novel hybrid fiber-optic illumination was developed to enhance the spatial resolution. It consists of a modulated light probe to generate a photocurrent signal and a ring of constant light, which suppresses the lateral diffusion of minority carriers excited by the modulated light. It is demonstrated that the spatial resolution was improved from 92 μm to 68 μm.},
  language  = {en}
}
@article{AlmajhdiSengerAmeretal.2014,
  author    = {Almajhdi, Fahad N. and Senger, Tilo and Amer, Haitham M. and Gissmann, Lutz and {\"O}hlschl{\"a}ger, Peter},
  title     = {Design of a highly effective therapeutic HPV16 E6/E7-specific DNA vaccine: optimization by different ways of sequence rearrangements (Shuffling)},
  series = {PLOS one},
  volume    = {11},
  journal   = {PLOS one},
  number    = {9},
  publisher = {PLOS},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0113461},
  pages     = {e113461},
  year      = {2014},
  abstract  = {Persistent infection with the high-risk Human Papillomavirus type 16 (HPV 16) is the causative event for the development of cervical cancer and other malignant tumors of the anogenital tract and of the head and neck. Despite many attempts to develop therapeutic vaccines no candidate has entered late clinical trials. An interesting approach is a DNA based vaccine encompassing the nucleotide sequence of the E6 and E7 viral oncoproteins. Because both proteins are consistently expressed in HPV infected cells they represent excellent targets for immune therapy. Here we report the development of 8 DNA vaccine candidates consisting of differently rearranged HPV-16 E6 and E7 sequences within one molecule providing all naturally occurring epitopes but supposedly lacking transforming activity. The HPV sequences were fused to the J-domain and the SV40 enhancer in order to increase immune responses. We demonstrate that one out of the 8 vaccine candidates induces very strong cellular E6- and E7- specific cellular immune responses in mice and, as shown in regression experiments, efficiently controls growth of HPV 16 positive syngeneic tumors. This data demonstrates the potential of this vaccine candidate to control persistent HPV 16 infection that may lead to malignant disease. It also suggests that different sequence rearrangements influence the immunogenecity by an as yet unknown mechanism.},
  language  = {en}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Funkstandards f{\"u}r Sensornetzwerke},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 63},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 12},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {36 -- 41},
  year      = {2014},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet : Protokoll-Reigen},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 63},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 26},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {24 -- 31},
  year      = {2014},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Der Embedded Wireless-Report},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {18 -- 25},
  year      = {2014},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet mit Standardtechnik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Embedded : Fachmagazin f{\"u}r die Entwicklung von Embedded-Systemen},
  volume    = {Bd. 63},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Embedded : Fachmagazin f{\"u}r die Entwicklung von Embedded-Systemen},
  number    = {H. 12},
  publisher = {WEKA-Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {28 -- 32},
  year      = {2014},
  language  = {de}
}
@article{Wollert2014,
  author    = {Wollert, J{\"o}rg},
  title     = {Feldbustechnologie},
  series = {Factory : der Durchblick in der Technik},
  journal   = {Factory : der Durchblick in der Technik},
  publisher = {WEKA-Industriemedien},
  address   = {Wien},
  pages     = {Publ. online},
  year      = {2014},
  language  = {de}
}
@article{DemnyHebel2014,
  author    = {Demny, Andreas and Hebel, Christoph},
  title     = {Rechnergest{\"u}tzte Ermittlung der Verbindungsfunktionsstufen und der verbindungsbezogenen Angebotsqualit{\"a}t nach den Richtlinien f{\"u}r integrierte Netzgestaltung nach RIN 2008},
  series = {Straßenverkehrstechnik : Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr ; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  volume    = {Jg. 58},
  journal   = {Straßenverkehrstechnik : Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr ; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  number    = {H. 12},
  publisher = {Kirschbaum Verlag},
  address   = {Bonn},
  issn      = {0039-2219},
  pages     = {811 -- 820},
  year      = {2014},
  language  = {de}
}
@article{Thomas2014,
  author    = {Thomas, Axel},
  title     = {Generation Y},
  series = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft},
  volume    = {10},
  journal   = {P.T. : Magazin f{\"u}r Wirtschaft und Gesellschaft},
  number    = {3},
  publisher = {OPS Netzwerk},
  address   = {Leipzig},
  issn      = {1860-501X},
  pages     = {6 -- 9},
  year      = {2014},
  language  = {de}
}
@article{ThomasWassenberg2014,
  author    = {Thomas, Axel and Wassenberg, Gerd},
  title     = {Erfolgreich sein im Kampf um die besten Talente : Employer Branding},
  series = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen},
  journal   = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen},
  publisher = {IHK Aachen},
  address   = {Aachen},
  year      = {2014},
  language  = {de}
}
@article{MartinGonzalezKotliarRiosMartinezetal.2014,
  author    = {Martin-Gonzalez, Anabel and Kotliar, Konstantin and Rios-Martinez, Jorge and Lanzl, Ines and Navab, Nassir},
  title     = {Mediated-reality magnification for macular degeneration rehabilitation},
  series = {Journal of Modern Optics},
  volume    = {61},
  journal   = {Journal of Modern Optics},
  number    = {17},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1362-3044},
  doi       = {10.1080/09500340.2014.936110},
  pages     = {1400 -- 1408},
  year      = {2014},
  language  = {en}
}
@article{ButenwegMeyerFehling2014,
  author    = {Butenweg, Christoph and Meyer, Udo and Fehling, Ekkehard},
  title     = {EU-Projekt INSYSME: Innovative Techniken f{\"u}r erdbebensichere Ausfachungsw{\"a}nde aus Ziegelmauerwerk in Stahlbetonrahmentragwerken},
  series = {Mauerwerk : European journal of masonry},
  volume    = {18},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {2},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201400612},
  pages     = {78 -- 81},
  year      = {2014},
  abstract  = {Am 1. Oktober 2013 ist das auf drei Jahre angelegte EU-Forschungsprojekt INSYSME - Innovative Systeme f{\"u}r erdbebentaugliche Ausfachungsw{\"a}nde aus Ziegelmauerwerk in Stahlbetonrahmentragwerken - gestartet. Unter der Koordination der Universit{\"a}t Padua beteiligen sich 16 Partner aus sechs europ{\"a}ischen L{\"a}ndern (Deutschland, Griechenland, Italien, Portugal, Rum{\"a}nien, T{\"u}rkei). Als deutsche Partner nehmen die Arbeitsgemeinschaft Mauerziegel aus Bonn, die Universit{\"a}t Kassel sowie das Ingenieurb{\"u}ro SDA-engineering GmbH aus Herzogenrath, teil. Ziel der deutschen Partner ist die Entwicklung von innovativen Ausfachungssystemen aus monolithischem w{\"a}rmed{\"a}mmenden Ziegelmauerwerk, mit denen nicht nur eine erh{\"o}hte Erdbebensicherheit, sondern auch die sichere Erf{\"u}llung der steigenden Anforderungen aus Windbeanspruchungen gew{\"a}hrleistet werden k{\"o}nnen. Die Forschungsergebnisse sollen vom Partner SDA-engineering GmbH in die bereits seit einigen Jahren verf{\"u}gbare Softwarel{\"o}sung MINEA [1] integriert werden. Weitere Informationen stehen auf den Websites des Projektes [2] zur Verf{\"u}gung. Im vorliegenden Beitrag werden nach einer kurzen thematischen Einf{\"u}hrung die Ergebnisse von Tastversuchen an senkrecht zur Ebene belasteten Ausfachungsw{\"a}nden aus Planziegelmauerwerk vorgestellt. Im Anschluss wird das geplante Arbeitsprogramm der deutschen Partner im Projekt INSYSME beschrieben.},
  language  = {de}
}
@article{GellertButenweg2014,
  author    = {Gellert, Christoph and Butenweg, Christoph},
  title     = {Seismic analysis of masonry structures in German earthquake zones according to DIN EN 1998-1},
  series = {Mauerwerk : European journal of masonry},
  volume    = {18},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {3-4},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201400626},
  pages     = {188 -- 196},
  year      = {2014},
  abstract  = {Die Erdbeben in Albstadt 1978 (Magnitude 5,7), Roermond 1992 (Magnitude 5,9) oder in Waldkirch 2004 (Magnitude 5,1) haben verdeutlicht, dass die erdbebensichere Auslegung von Mauerwerksbauten auch in Deutschland von großer Bedeutung ist. Bereits im Jahr 1981 wurde die DIN 4149 (1981) "Bauten in deutschen Erdbebengebieten - Lastannahmen, Bemessung und Ausf{\"u}hrung {\"u}blicher Hochbauten" eingef{\"u}hrt, in der aber f{\"u}r Mauerwerksbauten nur wenige Anforderungen gestellt wurden. Diese Norm wurde durch den NABau-Arbeitsausschuss "Erdbeben; Sonderfragen" des Deutschen Instituts f{\"u}r Normung e.V. (DIN) auf Grundlage des Eurocode 8 (2004) vollst{\"a}ndig {\"u}berarbeitet und durch die DIN 4149 (2005) abgel{\"o}st, die umfangreiche Regelungen f{\"u}r die seismische Auslegung von Mauerwerksbauten enth{\"a}lt. Mittlerweile liegen die DIN EN 1998-1 (2010) und der Nationale Anhang DIN EN 1998-1/NA (2011) vor, die nach Einarbeitung der Ergebnisse der durchgef{\"u}hrten Anwendungserprobung bauaufsichtlich eingef{\"u}hrt und die DIN 4149 (2005) ersetzen werden. Der folgende Beitrag gibt einen {\"U}berblick {\"u}ber die seismische Berechnung und Bemessung von Mauerwerksbauten nach dem europ{\"a}ischen Regelwerk und illustriert deren Anwendung an einem baupraktischen Beispiel.},
  language  = {de}
}
@article{MeyerButenwegFehling2014,
  author    = {Meyer, Udo and Butenweg, Christoph and Fehling, Ekkehard},
  title     = {EU-Projekt INSYSME : innovative Systeme f{\"u}r erdbebentaugliche Ausfachungsw{\"a}nde aus Ziegelmauerwerk},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {89 (2014)},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  number    = {April},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S14 -- S15},
  year      = {2014},
  language  = {de}
}
@article{ButenwegSchmittRosen2014,
  author    = {Butenweg, Christoph and Schmitt, Timo and Rosen, Britta},
  title     = {Seismische Einwirkungen auf erdverlegte Rohrleitungssysteme},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  volume    = {89 (2014)},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  number    = {Heft 7/8},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {316 -- 324},
  year      = {2014},
  language  = {de}
}
@article{TuraliyevaYeshibaevDigeletal.2014,
  author    = {Turaliyeva, M. and Yeshibaev, A. and Digel, Ilya and Elibayeva, G. and Sydykova, A. and Uspabayeva, A. and Dosybayeva, G. and Zhylysbayeva, A. and Lakhanova, K.},
  title     = {Molecular-genetic identification of emerged novel invasive pathogens of Asiatic Elm Ulmus pumila L},
  series = {Life science journal},
  volume    = {11},
  journal   = {Life science journal},
  number    = {Spec. iss. 5s},
  publisher = {Marsland Press},
  address   = {New York},
  issn      = {1097-8135},
  doi       = {10.7537/marslsj1105s14.33},
  pages     = {171 -- 175},
  year      = {2014},
  abstract  = {The dwarf elm Ulmus pumila L. (Ulmaceae) is one of indigenous species of flora in Kazakhstan and forms a basis of dendroflora in virtually all settlements of the region. In the past decade, multiple outbreaks of previously unknown diseases of the small-leaved elm have been registered. In our study, by the molecular-genetic analysis it was found that the pathogens responsible for the outbreaks are microfungi belonging to the genus Fusarium - F. solani and F. oxysporum. The nucleotide sequences (ITS regions) isolated from the diseased trees showed very high similarity with the GenBank control numbers EU625403.1 and FJ478128.1 (100.0 and 99.0 \% respectively). Oncoming research will focus on the search of natural microbial antagonists of the discovered phytopathogens.},
  language  = {en}
}
@article{ButenwegRenault2014,
  author    = {Butenweg, Christoph and Renault, Philippe},
  title     = {Workshop der Gesellschaften zum EU-Projekt SHARE},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {89 (2014)},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  number    = {Oktober},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S2 -- S3},
  year      = {2014},
  language  = {de}
}
@article{LehnertzAnsmannBialonskietal.2014,
  author    = {Lehnertz, Klaus and Ansmann, Gerrit and Bialonski, Stephan and Dickten, Henning and Geier, Christian and Porz, Stephan},
  title     = {Evolving networks in the human epileptic brain},
  series = {Physica D: Nonlinear Phenomena},
  volume    = {267},
  journal   = {Physica D: Nonlinear Phenomena},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-2789},
  doi       = {10.1016/j.physd.2013.06.009},
  pages     = {7 -- 15},
  year      = {2014},
  abstract  = {Network theory provides novel concepts that promise an improved characterization of interacting dynamical systems. Within this framework, evolving networks can be considered as being composed of nodes, representing systems, and of time-varying edges, representing interactions between these systems. This approach is highly attractive to further our understanding of the physiological and pathophysiological dynamics in human brain networks. Indeed, there is growing evidence that the epileptic process can be regarded as a large-scale network phenomenon. We here review methodologies for inferring networks from empirical time series and for a characterization of these evolving networks. We summarize recent findings derived from studies that investigate human epileptic brain networks evolving on timescales ranging from few seconds to weeks. We point to possible pitfalls and open issues, and discuss future perspectives.},
  language  = {en}
}
@article{AkimbekovDigelOHerasetal.2014,
  author    = {Akimbekov, Nuraly S. and Digel, Ilya and O´Heras, C. and Tastambek, K.T. and Savitskaya, I.S. and Ualyeva, P.S. and Mansurov, Z.A. and Zhubanova, A.A.},
  title     = {Adsorption of bacterial lipopolysaccharides on carbonized rice husks obtained in the batch experiments},
  series = {Experimental Biology},
  volume    = {60},
  journal   = {Experimental Biology},
  number    = {1/2},
  publisher = {Al-Farabi Kazakh National University},
  address   = {Almaty},
  issn      = {1563-0218},
  pages     = {144 -- 148},
  year      = {2014},
  abstract  = {The scope of this study is the measurement of endotoxin adsorption rate for carbonized rice husk. It showed good adsorption properties for LPS. During the batch experiments, several techniques were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics.},
  language  = {en}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@article{ArinkinDigelPorstetal.2014,
  author    = {Arinkin, Vladimir and Digel, Ilya and Porst, Dariusz and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard},
  title     = {Phenotyping date palm varieties via leaflet cross-sectional imaging and artificial neural network application},
  series = {BMC bioinformatics},
  volume    = {15},
  journal   = {BMC bioinformatics},
  number    = {55},
  issn      = {1471-2105},
  doi       = {10.1186/1471-2105-15-55},
  pages     = {1 -- 8},
  year      = {2014},
  abstract  = {Background True date palms (Phoenix dactylifera L.) are impressive trees and have served as an indispensable source of food for mankind in tropical and subtropical countries for centuries. The aim of this study is to differentiate date palm tree varieties by analysing leaflet cross sections with technical/optical methods and artificial neural networks (ANN). Results Fluorescence microscopy images of leaflet cross sections have been taken from a set of five date palm tree cultivars (Hewlat al Jouf, Khlas, Nabot Soltan, Shishi, Um Raheem). After features extraction from images, the obtained data have been fed in a multilayer perceptron ANN with backpropagation learning algorithm. Conclusions Overall, an accurate result in prediction and differentiation of date palm tree cultivars was achieved with average prediction in tenfold cross-validation is 89.1\% and reached 100\% in one of the best ANN.},
  language  = {en}
}
@article{GollandEngling2014,
  author    = {Golland, Alexander and Engling, Christoph},
  title     = {a-i3/BSI Symposium 2014: Sicherheit von Daten und Identit{\"a}ten angesichts NSA und Big Data},
  series = {DSB Datenschutz-Berater},
  volume    = {38},
  journal   = {DSB Datenschutz-Berater},
  number    = {7-8},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  isbn      = {0170-7256},
  pages     = {165 -- 166},
  year      = {2014},
  language  = {de}
}
@article{KronhardtAlexopoulosReisseletal.2014,
  author    = {Kronhardt, Valentina and Alexopoulos, Spiros and Reißel, Martin and Sattler, Johannes Christoph and Hoffschmidt, Bernhard and H{\"a}nel, Matthias and Doerbeck, Till},
  title     = {High-temperature thermal storage system for solar tower power plants with open-volumetric air receiver simulation and energy balancing of a discretized model},
  series = {Energy procedia},
  volume    = {49},
  journal   = {Energy procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102 (E-Journal) ; 1876-6102 (Print)},
  doi       = {10.1016/j.egypro.2014.03.094},
  pages     = {870 -- 877},
  year      = {2014},
  abstract  = {This paper describes the modeling of a high-temperature storage system for an existing solar tower power plant with open volumetric receiver technology, which uses air as heat transfer medium (HTF). The storage system model has been developed in the simulation environment Matlab/Simulink®. The storage type under investigation is a packed bed thermal energy storage system which has the characteristics of a regenerator. Thermal energy can be stored and discharged as required via the HTF air. The air mass flow distribution is controlled by valves, and the mass flow by two blowers. The thermal storage operation strategy has a direct and significant impact on the energetic and economic efficiency of the solar tower power plants.},
  language  = {en}
}
@article{HandtkeSchroeterJuergenetal.2014,
  author    = {Handtke, Stefan and Schroeter, Rebecca and J{\"u}rgen, Britta and Methling, Karen and Schl{\"u}ter, Rabea and Albrecht, Dirk and Hijum, Sacha A. F. T. van and Bongaerts, Johannes and Maurer, Karl-Heinz and Lalk, Michael and Schweder, Thomas and Hecker, Michael and Voigt, Birgit},
  title     = {Bacillus pumilus reveals a remarkably high resistance to hydrogen peroxide provoked oxidative stress},
  series = {PLOS one},
  volume    = {9},
  journal   = {PLOS one},
  number    = {1},
  publisher = {PLOS},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0085625},
  pages     = {e85625},
  year      = {2014},
  abstract  = {Bacillus pumilus is characterized by a higher oxidative stress resistance than other comparable industrially relevant Bacilli such as B. subtilis or B. licheniformis. In this study the response of B. pumilus to oxidative stress was investigated during a treatment with high concentrations of hydrogen peroxide at the proteome, transcriptome and metabolome level. Genes/proteins belonging to regulons, which are known to have important functions in the oxidative stress response of other organisms, were found to be upregulated, such as the Fur, Spx, SOS or CtsR regulon. Strikingly, parts of the fundamental PerR regulon responding to peroxide stress in B. subtilis are not encoded in the B. pumilus genome. Thus, B. pumilus misses the catalase KatA, the DNA-protection protein MrgA or the alkyl hydroperoxide reductase AhpCF. Data of this study suggests that the catalase KatX2 takes over the function of the missing KatA in the oxidative stress response of B. pumilus. The genome-wide expression analysis revealed an induction of bacillithiol (Cys-GlcN-malate, BSH) relevant genes. An analysis of the intracellular metabolites detected high intracellular levels of this protective metabolite, which indicates the importance of bacillithiol in the peroxide stress resistance of B. pumilus.},
  language  = {en}
}
@article{FrotscherStaat2014,
  author    = {Frotscher, Ralf and Staat, Manfred},
  title     = {Stresses produced by different textile mesh implants in a tissue equivalent},
  series = {BioNanoMaterials},
  volume    = {15},
  journal   = {BioNanoMaterials},
  number    = {1-2},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2191-4672 (E-Journal); 2193-066X (E-Journal); 0011-8656 (Print); 1616-0177 (Print); 2193-0651 (Print)},
  doi       = {10.1515/bnm-2014-0003},
  pages     = {25 -- 30},
  year      = {2014},
  abstract  = {Two single-incision mini-slings used for treating urinary incontinence in women are compared with respect to the stresses they produce in their surrounding tissue. In an earlier paper we experimentally observed that these implants produce considerably different stress distributions in a muscle tissue equivalent. Here we perform 2D finite element analyses to compare the shear stresses and normal stresses in the tissue equivalent for the two meshes and to investigate their failure behavior. The results clearly show that the Gynecare TVT fails for increasing loads in a zipper-like manner because it gradually debonds from the surrounding tissue. Contrary to that, the tissue at the ends of the DynaMesh-SIS direct may rupture but only at higher loads. The simulation results are in good agreement with the experimental observations thus the computational model helps to interpret the experimental results and provides a tool for qualitative evaluation of mesh implants.},
  language  = {en}
}
@article{AlhwarinFerreinScholl2014,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {IR stereo kinect: improving depth images by combining structured light with IR stereo},
  pages     = {1 -- 9},
  year      = {2014},
  language  = {en}
}
@article{DachwaldMikuckiTulaczyketal.2014,
  author    = {Dachwald, Bernd and Mikucki, Jill and Tulaczyk, Slawek and Digel, Ilya and Espe, Clemens and Feldmann, Marco and Francke, Gero and Kowalski, Julia and Xu, Changsheng},
  title     = {IceMole : A maneuverable probe for clean in situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems},
  series = {Annals of Glaciology},
  volume    = {55},
  journal   = {Annals of Glaciology},
  number    = {65},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  issn      = {1727-5644},
  doi       = {10.3189/2014AoG65A004},
  pages     = {14 -- 22},
  year      = {2014},
  abstract  = {There is significant interest in sampling subglacial environments for geobiological studies, but they are difficult to access. Existing ice-drilling technologies make it cumbersome to maintain microbiologically clean access for sample acquisition and environmental stewardship of potentially fragile subglacial aquatic ecosystems. The IceMole is a maneuverable subsurface ice probe for clean in situ analysis and sampling of glacial ice and subglacial materials. The design is based on the novel concept of combining melting and mechanical propulsion. It can change melting direction by differential heating of the melting head and optional side-wall heaters. The first two prototypes were successfully tested between 2010 and 2012 on glaciers in Switzerland and Iceland. They demonstrated downward, horizontal and upward melting, as well as curve driving and dirt layer penetration. A more advanced probe is currently under development as part of the Enceladus Explorer (EnEx) project. It offers systems for obstacle avoidance, target detection, and navigation in ice. For the EnEx-IceMole, we will pay particular attention to clean protocols for the sampling of subglacial materials for biogeochemical analysis. We plan to use this probe for clean access into a unique subglacial aquatic environment at Blood Falls, Antarctica, with return of a subglacial brine sample.},
  language  = {en}
}
@article{LeandroBungCarvalho2014,
  author    = {Leandro, J. and Bung, Daniel Bernhard and Carvalho, R.},
  title     = {Measuring void fraction and velocity fields of a stepped spillway for skimming flow using non-intrusive methods},
  series = {Experiments in fluids},
  journal   = {Experiments in fluids},
  number    = {55},
  publisher = {Springer Nature},
  address   = {Heidelberg},
  issn      = {0723-4864 (Print) ; 1432-1114 (Online)},
  doi       = {10.1007/s00348-014-1732-6},
  pages     = {Art. 1732},
  year      = {2014},
  language  = {en}
}
@article{KueppersSteffenHellmuthetal.2014,
  author    = {K{\"u}ppers, Tobias and Steffen, Victoria and Hellmuth, Hendrik and O'Connell, Timothy and Bongaerts, Johannes and Maurer, Karl-Heinz and Wiechert, Wolfgang},
  title     = {Developing a new production host from a blueprint: Bacillus pumilus as an industrial enzyme producer},
  series = {Microbial cell factories},
  volume    = {13},
  journal   = {Microbial cell factories},
  publisher = {BioMed Central},
  address   = {London},
  issn      = {1475-2859 (E-Journal)},
  doi       = {10.1186/1475-2859-13-46},
  pages     = {Article No. 46},
  year      = {2014},
  language  = {en}
}
@article{PhamStaat2014,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {FEM-based shakedown analysis of hardening structures},
  series = {Asia Pacific journal on computational engineering},
  journal   = {Asia Pacific journal on computational engineering},
  number    = {1},
  publisher = {SpringerOpen},
  address   = {Berlin},
  issn      = {2196-1166 (E-Journal)},
  doi       = {10.1186/2196-1166-1-4},
  pages     = {Article No. 4},
  year      = {2014},
  abstract  = {This paper develops a new finite element method (FEM)-based upper bound algorithm for limit and shakedown analysis of hardening structures by a direct plasticity method. The hardening model is a simple two-surface model of plasticity with a fixed bounding surface. The initial yield surface can translate inside the bounding surface, and it is bounded by one of the two equivalent conditions: (1) it always stays inside the bounding surface or (2) its centre cannot move outside the back-stress surface. The algorithm gives an effective tool to analyze the problems with a very high number of degree of freedom. Our numerical results are very close to the analytical solutions and numerical solutions in literature.},
  language  = {en}
}
@article{HaagZontarSchleupenetal.2014,
  author    = {Haag, S. and Zontar, D. and Schleupen, Josef and M{\"u}ller, T. and Brecher, C.},
  title     = {Chain of refined perception in self-optimizing assembly of micro-optical systems},
  series = {Journal of sensors and sensor systems},
  volume    = {3},
  journal   = {Journal of sensors and sensor systems},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-3-87-2014},
  pages     = {87 -- 95},
  year      = {2014},
  abstract  = {Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements - especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.},
  language  = {en}
}
@article{ScheerWolf2014,
  author    = {Scheer, Nico and Wolf, C. Roland},
  title     = {Genetically humanized mouse models of drug metabolizing enzymes and transporters and their applications},
  series = {Xenobiotica},
  volume    = {44},
  journal   = {Xenobiotica},
  number    = {2},
  publisher = {Taylor \& Francis},
  address   = {Abingdon},
  issn      = {1366-5928},
  doi       = {10.3109/00498254.2013.815831},
  pages     = {96 -- 108},
  year      = {2014},
  abstract  = {1. Drug metabolizing enzymes and transporters play important roles in the absorption, metabolism, tissue distribution and excretion of various compounds and their metabolites and thus can significantly affect their efficacy and safety. Furthermore, they can be involved in drug-drug interactions which can result in adverse responses, life-threatening toxicity or impaired efficacy. Significant species differences in the interaction of compounds with drug metabolizing enzymes and transporters have been described. 2. In order to overcome the limitation of animal models in accurately predicting human responses, a large variety of mouse models humanized for drug metabolizing enzymes and to a lesser extent drug transporters have been created. 3. This review summarizes the literature describing these mouse models and their key applications in studying the role of drug metabolizing enzymes and transporters in drug bioavailability, tissue distribution, clearance and drug-drug interactions as well as in human metabolite testing and risk assessment. 4. Though such humanized mouse models have certain limitations, there is great potential for their use in basic research and for testing and development of new medicines. These limitations and future potentials will be discussed.},
  language  = {en}
}
@article{JoerissenHeger2014,
  author    = {J{\"o}rissen, J{\"o}rg and Heger, Michael},
  title     = {Zur Wirkung hochschuldidaktisch fundierter und in den Fachbereichen verankerter Lehrveranstaltungsevaluation},
  series = {Qualit{\"a}t in der Wissenschaft (QiW)},
  volume    = {8},
  journal   = {Qualit{\"a}t in der Wissenschaft (QiW)},
  number    = {2+3},
  publisher = {Universit{\"a}tsverlag Webler},
  address   = {Bielefeld},
  issn      = {1860-3041},
  pages     = {70 -- 80},
  year      = {2014},
  language  = {de}
}
@article{HoehrPaulssenBenardetal.2014,
  author    = {Hoehr, Cornelia and Paulßen, Elisabeth and Benard, Francois and Lee, Chris Jaeil and Hou, Xinchi and Badesso, Brian and Ferguson, Simon and Miao, Qing and Yang, Hua and Buckley, Ken and Hanemaayer, Victoire and Zeisler, Stefan and Ruth, Thomas and Celler, Anna and Schaffer, Paul},
  title     = {⁴⁴ᶢSc production using a water target on a 13 MeV cyclotron},
  series = {Nuclear medicine and biology},
  volume    = {41},
  journal   = {Nuclear medicine and biology},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9614},
  doi       = {10.1016/j.nucmedbio.2013.12.016},
  pages     = {401 -- 406},
  year      = {2014},
  abstract  = {Access to promising radiometals as isotopes for novel molecular imaging agents requires that they are routinely available and inexpensive to obtain. Proximity to a cyclotron center outfitted with solid target hardware, or to an isotope generator for the metal of interest is necessary, both of which can introduce significant hurdles in development of less common isotopes. Herein, we describe the production of ⁴⁴Sc (t₁⸝₂ = 3.97 h, Eavg,β⁺ = 1.47 MeV, branching ratio = 94.27\%) in a solution target and an automated loading system which allows a quick turn-around between different radiometallic isotopes and therefore greatly improves their availability for tracer development. Experimental yields are compared to theoretical calculations.},
  language  = {en}
}