@incollection{DachwaldOhndorf2019,
  author    = {Dachwald, Bernd and Ohndorf, Andreas},
  title     = {Global optimization of continuous-thrust trajectories using evolutionary neurocontrol},
  series = {Modeling and Optimization in Space Engineering},
  booktitle = {Modeling and Optimization in Space Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-10501-3},
  doi       = {10.1007/978-3-030-10501-3_2},
  pages     = {33 -- 57},
  year      = {2019},
  abstract  = {Searching optimal continuous-thrust trajectories is usually a difficult and time-consuming task. The solution quality of traditional optimal-control methods depends strongly on an adequate initial guess because the solution is typically close to the initial guess, which may be far from the (unknown) global optimum. Evolutionary neurocontrol attacks continuous-thrust optimization problems from the perspective of artificial intelligence and machine learning, combining artificial neural networks and evolutionary algorithms. This chapter describes the method and shows some example results for single- and multi-phase continuous-thrust trajectory optimization problems to assess its performance. Evolutionary neurocontrol can explore the trajectory search space more exhaustively than a human expert can do with traditional optimal-control methods. Especially for difficult problems, it usually finds solutions that are closer to the global optimum. Another fundamental advantage is that continuous-thrust trajectories can be optimized without an initial guess and without expert supervision.},
  language  = {en}
}
@incollection{Eggert2019,
  author    = {Eggert, Mathias},
  title     = {Big Data Research - How to Structure the Changes of the Past Decade?},
  series = {The Art of Structuring},
  booktitle = {The Art of Structuring},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-06234-7},
  doi       = {10.1007/978-3-030-06234-7_26},
  pages     = {271 -- 281},
  year      = {2019},
  abstract  = {In the past decade, many IS researchers focused on researching the phenomenon of Big Data. At the same time, the relevance of data protection gets more attention than ever before. In particular, since the enactment of the European General Data Protection Regulation in May 2018 Information Systems research should provide answers for protecting personal data. The article at hand presents a structuring framework for Big Data research outcome and the consideration of data protection. IS Researchers might use the framework in order to structure Big Data literature and to identify research gaps that should be addressed in the future.},
  language  = {en}
}
@incollection{BosseBarnat2019,
  author    = {Bosse, Elke and Barnat, Miriam},
  title     = {Kombination quantitativer und qualitativer Methoden zur Untersuchung der Studieneingangsphase},
  series = {Hochschulbildungsforschung. Theoretische, methodologische und methodische Denkanst{\"o}ße f{\"u}r die Hochschuldidaktik},
  booktitle = {Hochschulbildungsforschung. Theoretische, methodologische und methodische Denkanst{\"o}ße f{\"u}r die Hochschuldidaktik},
  editor    = {Jenert, Tobias and Reinmann, Gabi and Schmohl, Tobias},
  publisher = {Springer VS},
  address   = {Wiesbaden},
  isbn      = {978-3-658-20308-5},
  pages     = {169 -- 184},
  year      = {2019},
  language  = {de}
}
@incollection{FranzenSteckenPfaffetal.2019,
  author    = {Franzen, Julian and Stecken, Jannis and Pfaff, Raphael and Kuhlenk{\"o}tter, Bernd},
  title     = {Using the Digital Shadow for a Prescriptive Optimization of Maintenance and Operation : The Locomotive in the Context of the Cyber-Physical System},
  series = {Advances in Production, Logistics and Traffic},
  booktitle = {Advances in Production, Logistics and Traffic},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-13535-5},
  doi       = {10.1007/978-3-030-13535-5_19},
  pages     = {265 -- 276},
  year      = {2019},
  abstract  = {In competition with other modes of transport, rail freight transport is looking for solutions to become more attractive. Short-term success can be achieved through the data-driven optimization of operations and maintenance as well as the application of novel strategies such as prescriptive maintenance. After introducing the concept of prescriptive maintenance, this paper aims to prove that vehicle-focused applications of this approach indeed have the potential to increase attractiveness. However, even greater advantages can be activated if data from the horizontal network of the vehicle is available. Drawing on the state of the art in research and technology in the field of cyber-physical systems (CPS) as well as digital twins and shadows, our work serves to design a system of systems for the horizontal interconnection of a rail vehicle and to conceptualize a draft for a digital twin of a locomotive.},
  language  = {en}
}
@incollection{SchoeningWagnerPoghossianetal.2018,
  author    = {Sch{\"o}ning, Michael Josef and Wagner, Torsten and Poghossian, Arshak and Miyamoto, K.I. and Werner, C.F. and Krause, S. and Yoshinobu, T.},
  title     = {Light-addressable potentiometric sensors for (bio-)chemical sensing and imaging},
  series = {Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry. Vol. 7},
  booktitle = {Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry. Vol. 7},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {9780128097397},
  pages     = {295 -- 308},
  year      = {2018},
  language  = {en}
}
@incollection{BorchertTenbrake2020,
  author    = {Borchert, J{\"o}rg and Tenbrake, Andre},
  title     = {Bewirtschaftung von Flexibilit{\"a}t {\"u}ber Microservices eines Plattformanbieters},
  series = {Realisierung Utility 4.0 Band 1},
  booktitle = {Realisierung Utility 4.0 Band 1},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-25332-5},
  doi       = {10.1007/978-3-658-25332-5_37},
  pages     = {615 -- 626},
  year      = {2020},
  abstract  = {Die Energiewirtschaft befindet sich in einem starken Wandel, der v. a. durch die Energiewende und Digitalisierung Druck auf s{\"a}mtliche Marktteilnehmer aus{\"u}bt. Das klassische Gesch{\"a}ftsmodell des Energieversorgungsunternehmens ver{\"a}ndert sich dabei grundlegend. Der kontinuierlich ansteigende Einsatz dezentraler und volatiler Erzeugungsanlagen macht die Identifikation von Flexibilit{\"a}tspotenzialen notwendig, um weiterhin eine hohe Versorgungssicherheit zu gew{\"a}hrleisten. Dieser Schritt ist nur mit einem hohen Digitalisierungsgrad m{\"o}glich. Eine funktionale Plattform mit Microservices, die zu Gesch{\"a}ftsprozessen verbunden werden k{\"o}nnen, wird als M{\"o}glichkeit zur Aktivierung der Flexibilit{\"a}t und Digitalisierung der Energieversorgungsunternehmen im Folgenden vorgestellt.},
  language  = {de}
}
@incollection{RaoPathroseHueningetal.2019,
  author    = {Rao, Deepak and Pathrose, Plato and H{\"u}ning, Felix and Sid, Jithin},
  title     = {An Approach for Validating Safety of Perception Software in Autonomous Driving Systems},
  series = {Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16-18, 2019, Proceedings},
  booktitle = {Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16-18, 2019, Proceedings},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-32872-6},
  doi       = {10.1007/978-3-030-32872-6_20},
  pages     = {303 -- 316},
  year      = {2019},
  abstract  = {The increasing complexity of Advanced Driver Assistance Systems (ADAS) presents a challenging task to validate safe and reliable performance of these systems under varied conditions. The test and validation of ADAS/AD with real test drives, although important, involves huge costs and time. Simulation tools provide an alternative with the added advantage of reproducibility but often use ideal sensors, which do not reflect real sensor output accurately. This paper presents a new validation methodology using fault injection, as recommended by the ISO 26262 standard, to test software and system robustness. In our work, we investigated and developed a tool capable of inserting faults at different software and system levels to verify its robustness. The scope of this paper is to cover the fault injection test for the Visteon's DriveCore™ system, a centralized domain controller for Autonomous driving which is sensor agnostic and SoC agnostic. With this new approach, the validation of safety monitoring functionality and its behavior can be tested using real-world data instead of synthetic data from simulation tools resulting in having better confidence in system performance before proceeding with in-vehicle testing.},
  language  = {en}
}
@incollection{MuellerJungSchmoelzer2015,
  author    = {Mueller, Wolfram and Jung, Alexander and Schm{\"o}lzer, Bernhard},
  title     = {Der Einfluss der H{\"o}he {\"u}ber dem Meeresspiegel auf die Flugbahnen im Schispringen},
  series = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  booktitle = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  editor    = {Faulhaber, Martin and Schobersberger, Wolfgang and Schobersberger, Beatrix and Sumann, G{\"u}nther and Domej, Wolfgang},
  publisher = {{\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  address   = {Innsbruck},
  isbn      = {978-3-9501312-5-3},
  pages     = {173 -- 190},
  year      = {2015},
  language  = {de}
}
@incollection{MatchaKarzelPahl2013,
  author    = {Matcha, Heike and Karzel, R{\"u}diger and Pahl, Katja-Annika},
  title     = {Lehre als Praxis als Forschung: 1:1 Entwicklung von Messest{\"a}nden unter Einsatz parametrisierter Software und computergesteuerter Herstellung},
  series = {ECHT?! Zum Bezug von Praxis und Lehre in der Architekturausbildung},
  booktitle = {ECHT?! Zum Bezug von Praxis und Lehre in der Architekturausbildung},
  publisher = {TUDpress - Verlag der Wissenschaften},
  address   = {Dresden},
  isbn      = {978-3-94433111-9},
  pages     = {95 -- 108},
  year      = {2013},
  language  = {de}
}
@incollection{MatchaBarczik2011,
  author    = {Matcha, Heike and Barczik, G{\"u}nter},
  title     = {Mass Diversity: Individualized housing via parametric typology},
  series = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  booktitle = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  editor    = {Valena, Tomas and Avermaete, Tom and Vrachliotis, Georg},
  publisher = {Edition Axel Menges},
  address   = {Fellbach},
  isbn      = {978-3-936681-47-5},
  pages     = {354 -- 358},
  year      = {2011},
  language  = {en}
}
@incollection{Matcha2010,
  author    = {Matcha, Heike},
  title     = {Regelbasierte Planung - Parametrik},
  series = {Digitale Prozesse: Planung, Gestaltung, Fertigung},
  booktitle = {Digitale Prozesse: Planung, Gestaltung, Fertigung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Ed. Detail},
  address   = {M{\"u}nchen},
  isbn      = {978-3-920034-35-5},
  pages     = {24 -- 24},
  year      = {2010},
  language  = {de}
}
@incollection{Matcha2010,
  author    = {Matcha, Heike},
  title     = {Regelbasierte Planung - Parametrik},
  series = {Digitale Prozesse : Planung, Gestaltung, Fertigung},
  booktitle = {Digitale Prozesse : Planung, Gestaltung, Fertigung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Detail},
  address   = {M{\"u}nchen},
  isbn      = {978-3-95553-022-8},
  doi       = {10.11129/detail.9783955530228},
  pages     = {24 -- 24},
  year      = {2010},
  language  = {de}
}
@incollection{MatchaBarczikAgkathidis2009,
  author    = {Matcha, Heike and Barczik, G{\"u}nter and Agkathidis, Asterios},
  title     = {Produktive Prozesse: Mehr Vielfalt, Komplexit{\"a}t und Kreativit{\"a}t im Entwerfen mittels parametrisierter generativer Algorithmen},
  series = {Modulare Strukturen in Entwurf und Architektur},
  booktitle = {Modulare Strukturen in Entwurf und Architektur},
  publisher = {BIS-Publishers},
  address   = {Amsterdam},
  isbn      = {978-90-6369-208-7},
  pages     = {126 -- 130},
  year      = {2009},
  language  = {de}
}
@incollection{Matcha2007,
  author    = {Matcha, Heike},
  title     = {Vom Industriellen Bauen zu parametrischen Planungsprozessen},
  series = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  booktitle = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Technische Universit{\"a}t Darmstadt},
  address   = {Darmstadt},
  pages     = {12 -- 13},
  year      = {2007},
  language  = {de}
}
@incollection{Matcha2007,
  author    = {Matcha, Heike},
  title     = {Parametrischer Geb{\"a}udeentwurf},
  series = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  booktitle = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Technische Universit{\"a}t Darmstadt},
  address   = {Darmstadt},
  pages     = {14 -- 15},
  year      = {2007},
  language  = {de}
}
@incollection{SamuelssonScheerWilsonetal.2017,
  author    = {Samuelsson, K. and Scheer, Nico and Wilson, I. and Wolf, C.R. and Henderson, C.J.},
  title     = {Genetically Humanized Animal Models},
  series = {Comprehensive Medicinal Chemistry III. 3rd Edition},
  booktitle = {Comprehensive Medicinal Chemistry III. 3rd Edition},
  editor    = {Chackalamannil, Samuel},
  publisher = {Elsevier},
  address   = {Saint Louis},
  isbn      = {978-0-12-803201-5},
  doi       = {10.1016/B978-0-12-409547-2.12376-5},
  pages     = {130 -- 149},
  year      = {2017},
  abstract  = {Genetically humanized mice for proteins involved in drug metabolism and toxicity and mice engrafted with human hepatocytes are emerging as promising in vivo models for improved prediction of the pharmacokinetic, drug-drug interaction, and safety characteristics of compounds in humans. This is an overview on the genetically humanized and chimeric liver-humanized mouse models, which are illustrated with examples of their utility in drug metabolism and toxicity studies. The models are compared to give guidance for selection of the most appropriate model by highlighting advantages and disadvantages to be carefully considered when used for studies in drug discovery and development.},
  language  = {en}
}
@incollection{ScheerChuSalphatietal.2016,
  author    = {Scheer, Nico and Chu, Xiaoyan and Salphati, Laurent and Zamek-Gliszczynski, Maciej J.},
  title     = {Knockout and humanized animal models to study membrane transporters in drug development},
  series = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development},
  booktitle = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development},
  editor    = {Nicholls, Glynis},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  isbn      = {978-1-78262-379-3},
  doi       = {10.1039/9781782623793-00298},
  pages     = {298 -- 332},
  year      = {2016},
  language  = {en}
}
@incollection{WolfKapelyukhScheeretal.2015,
  author    = {Wolf, C. Roland and Kapelyukh, Yury and Scheer, Nico and Henderson, Colin J.},
  title     = {Application of Humanised and Other Transgenic Models to Predict Human Responses to Drugs},
  editor    = {Wilson, Alan G. E.},
  publisher = {RSC Publ.},
  address   = {Cambridge},
  isbn      = {978-1-78262-778-4},
  doi       = {10.1039/9781782622376-00152},
  pages     = {152 -- 176},
  year      = {2015},
  abstract  = {The use of transgenic animal models has transformed our knowledge of complex biochemical pathways in vivo. It has allowed disease processes to be modelled and used in the development of new disease prevention and treatment strategies. They can also be used to define cell- and tissue-specific pathways of gene regulation. A further major application is in the area of preclinical development where such models can be used to define pathways of chemical toxicity, and the pathways that regulate drug disposition. One major application of this approach is the humanisation of mice for the proteins that control drug metabolism and disposition. Such models can have numerous applications in the development of drugs and in their more sophisticated use in the clinic.},
  language  = {en}
}
@incollection{HendersonWolfScheer2009,
  author    = {Henderson, Colin J. and Wolf, C. Roland and Scheer, Nico},
  title     = {The use of transgenic animals to study drug metabolism},
  series = {Handbook of Drug Metabolism. 2nd Edition},
  booktitle = {Handbook of Drug Metabolism. 2nd Edition},
  editor    = {Woolf, Thomas F.},
  publisher = {Informa Healthcare},
  address   = {New York},
  isbn      = {978-1-4200-7647-9},
  pages     = {637 -- 658},
  year      = {2009},
  language  = {en}
}
@incollection{Finkenberger2018,
  author    = {Finkenberger, Isabel Maria},
  title     = {Schwellenreiten},
  series = {Prozesse reflexiven Entwerfens : Entwerfen und Forschen in Architektur und Landschaft},
  booktitle = {Prozesse reflexiven Entwerfens : Entwerfen und Forschen in Architektur und Landschaft},
  editor    = {Buchert, Margitta},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-558-1},
  pages     = {208 -- 226},
  year      = {2018},
  language  = {de}
}
@incollection{FiedlerHennMelcher2015,
  author    = {Fiedler, Gerda and Henn, Gudrun and Melcher, Karin},
  title     = {ANPAK - Ein Anpassungskurs f{\"u}r Studienanf{\"a}nger in den Ingenieurwissenschaften},
  series = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /},
  booktitle = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /},
  editor    = {Morschheuser, Petra},
  publisher = {Duale Hochschule Baden-W{\"u}rttemberg (DHBW)},
  address   = {Mosbach},
  isbn      = {978-3-943656-02-2},
  pages     = {90 -- 93},
  year      = {2015},
  language  = {de}
}
@incollection{Martin2019,
  author    = {Martin, Joachim},
  title     = {Bemessung von Baukonstruktionen},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_1},
  pages     = {1 -- 11},
  year      = {2019},
  language  = {de}
}
@incollection{Sparla2019,
  author    = {Sparla, Peter},
  title     = {Vermessung},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_2},
  pages     = {13 -- 61},
  year      = {2019},
  language  = {de}
}
@incollection{Ulke2019,
  author    = {Ulke, Bernd},
  title     = {Der baurechtliche Vertrag},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  pages     = {63 -- 87},
  year      = {2019},
  abstract  = {Anhand von kurzen theoretischen Einf{\"u}hrungen werden anhand von Beispielen die wesentlichen Aspekte des baurechtlichen Vertrages erl{\"a}utert. Nach einer Einf{\"u}hrung {\"u}ber das Zustandekommen von (Bau-) Vertr{\"a}gen wird die f{\"u}r Streitf{\"a}lle unerl{\"a}ssliche Dokumentation auf Baustellen erl{\"a}utert. Hierbei werden Hinweise zur Erstellung von Protokollen, zum E-Mail bei Großprojekten und zur Dokumentation von Stundenlohnarbeiten gegeben. Des Weiteren wird eine Schriftverkehrsliste vorgestellt, die zur Nachverfolgung des Schriftverkehrs bei Großprojekten unerl{\"a}sslich ist. Anschließend werden die typischen Vertragsarten vorgestellt, die bei der Abwicklung von Großprojekten zu beachten sind und die Unterschiede werden durch Fallbeispiele erl{\"a}utert. Einen Schwerpunkt des Kapitels bilden auftragsnehmerseitige Verz{\"u}ge sowie mangelbehaftete Leistungen. Hier werden Hinweise gegeben, wie in den entsprechenden Situationen zu reagieren ist.},
  language  = {de}
}
@incollection{Ulke2019,
  author    = {Ulke, Bernd},
  title     = {Baukosten und Finanzierung},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_4},
  pages     = {89 -- 100},
  year      = {2019},
  language  = {de}
}
@incollection{Krause2019,
  author    = {Krause, Thomas},
  title     = {Bauabrechnung und Mengenermittlung},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_5},
  pages     = {101 -- 116},
  year      = {2019},
  language  = {de}
}
@incollection{Ulke2019,
  author    = {Ulke, Bernd},
  title     = {Arbeitsvorbereitung und Ablaufplanung},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_6},
  pages     = {117 -- 154},
  year      = {2019},
  language  = {de}
}
@incollection{Krause2019,
  author    = {Krause, Thomas},
  title     = {Baumaschinen},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_7},
  pages     = {155 -- 163},
  year      = {2019},
  language  = {de}
}
@incollection{ErnhardtDrummvanGogetal.2019,
  author    = {Ernhardt, Selina and Drumm, Christian and van Gog, Tamara and Brand-Gruwel, Saskia and Jarodzka, Halszka},
  title     = {Through the eyes of a programmer : a research project on how to foster programming education with eye-tracking technology},
  series = {Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule f{\"u}r Angewandte Wissenschaften Aachen},
  booktitle = {Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule f{\"u}r Angewandte Wissenschaften Aachen},
  publisher = {Mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  pages     = {42 -- 47},
  year      = {2019},
  language  = {en}
}
@incollection{FinkenbergerBaumeisterKoch2019,
  author    = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria and Koch, Christian},
  title     = {Komplement und Verst{\"a}rker : Wandel durch neue Allianzen},
  series = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  booktitle = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-578-9},
  pages     = {10 -- 39},
  year      = {2019},
  language  = {de}
}
@incollection{FinkenbergerBaumeisterKoch2019,
  author    = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria and Koch, Christian},
  title     = {Komplement und Verst{\"a}rker : der Diskurs geht weiter},
  series = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  booktitle = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-578-9},
  pages     = {40 -- 49},
  year      = {2019},
  language  = {de}
}
@incollection{FinkenbergerHerbertMalornyetal.2019,
  author    = {Finkenberger, Isabel Maria and Herbert, Saskia and Malorny, Thomas and Koch, Christian},
  title     = {Perforierte Wirklichkeit und m{\"o}gliche Zuk{\"u}nfte : ein Gespr{\"a}ch},
  series = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  booktitle = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-578-9},
  pages     = {108 -- 129},
  year      = {2019},
  language  = {de}
}
@incollection{FinkenbergerBaumeisterKoch2019,
  author    = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria and Koch, Christian},
  title     = {Themen},
  series = {Komplement und Verst{\"a}rker: zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  booktitle = {Komplement und Verst{\"a}rker: zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-578-9},
  pages     = {50 -- 57},
  year      = {2019},
  language  = {de}
}
@incollection{FinkenbergerBaumeister2017,
  author    = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria},
  title     = {Working in between : Die Stadt von der anderen Seite sehen : Where Urban Planning Meets Artistic Practice},
  series = {New Stakeholders of Urban Change : A Question of Culture and Attitude?. - (Perspectives in Metropolitan Research ; IV)},
  booktitle = {New Stakeholders of Urban Change : A Question of Culture and Attitude?. - (Perspectives in Metropolitan Research ; IV)},
  editor    = {Berger, Hilke Marit and Ziemer, Gesa},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-487-4},
  pages     = {119 -- 129},
  year      = {2017},
  language  = {de}
}
@incollection{Laack2020,
  author    = {Laack, Walter van},
  title     = {Twee Kanten van {\´e}{\´e}n Medaille},
  series = {Het Geheim van Elysion : 45 Jaar Studies naar Nabij-de-Dood-Ervaringen over Bewustzijn in Liefde zonder Waarheen},
  booktitle = {Het Geheim van Elysion : 45 Jaar Studies naar Nabij-de-Dood-Ervaringen over Bewustzijn in Liefde zonder Waarheen},
  publisher = {Van Warven},
  address   = {Kampen},
  isbn      = {978-94-93175-44-0},
  pages     = {97 -- 105},
  year      = {2020},
  language  = {nl}
}
@incollection{HoffschmidtAlexopoulosRauetal.2021,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes, Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, B. and Caminos, R.A. Chico and Rend{\´o}n, C. and Hilger, P.},
  title     = {Concentrating Solar Power},
  series = {Earth systems and environmental sciences},
  booktitle = {Earth systems and environmental sciences},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-409548-9},
  doi       = {10.1016/B978-0-12-819727-1.00089-3},
  year      = {2021},
  abstract  = {The focus of this chapter is the production of power and the use of the heat produced from concentrated solar thermal power (CSP) systems. The chapter starts with the general theoretical principles of concentrating systems including the description of the concentration ratio, the energy and mass balance. The power conversion systems is the main part where solar-only operation and the increase in operational hours. Solar-only operation include the use of steam turbines, gas turbines, organic Rankine cycles and solar dishes. The operational hours can be increased with hybridization and with storage. Another important topic is the cogeneration where solar cooling, desalination and of heat usage is described. Many examples of commercial CSP power plants as well as research facilities from the past as well as current installed and in operation are described in detail. The chapter closes with economic and environmental aspects and with the future potential of the development of CSP around the world.},
  language  = {en}
}
@incollection{AltherrEdererLorenzetal.2016,
  author    = {Altherr, Lena and Ederer, Thorsten and Lorenz, Ulf and Pelz, Peter F. and P{\"o}ttgen, Philipp},
  title     = {Designing a feedback control system via mixed-integer programming},
  series = {Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research},
  booktitle = {Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research},
  editor    = {L{\"u}bbecke, Marco E. and Koster, Arie and Letmathe, Peter and Madlener, Reihard and Preis, Britta and Walther, Grit},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-28695-2},
  doi       = {10.1007/978-3-319-28697-6_18},
  pages     = {121 -- 127},
  year      = {2016},
  abstract  = {Pure analytical or experimental methods can only find a control strategy for technical systems with a fixed setup. In former contributions we presented an approach that simultaneously finds the optimal topology and the optimal open-loop control of a system via Mixed Integer Linear Programming (MILP). In order to extend this approach by a closed-loop control we present a Mixed Integer Program for a time discretized tank level control. This model is the basis for an extension by combinatorial decisions and thus for the variation of the network topology. Furthermore, one is able to appraise feasible solutions using the global optimality gap.},
  language  = {en}
}
@incollection{Kotliar2021,
  author    = {Kotliar, Konstantin},
  title     = {Ocular rigidity: clinical approach},
  series = {Ocular Rigidity, Biomechanics and Hydrodynamics of the Eye},
  booktitle = {Ocular Rigidity, Biomechanics and Hydrodynamics of the Eye},
  editor    = {Pallikaris, I. and Tsilimbaris, M. K. and Dastiridou, A. I.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-64422-2},
  doi       = {10.1007/978-3-030-64422-2_2},
  pages     = {15 -- 43},
  year      = {2021},
  abstract  = {The term ocular rigidity is widely used in clinical ophthalmology. Generally it is assumed as a resistance of the whole eyeball to mechanical deformation and relates to biomechanical properties of the eye and its tissues. Basic principles and formulas for clinical tonometry, tonography and pulsatile ocular blood flow measurements are based on the concept of ocular rigidity. There is evidence for altered ocular rigidity in aging, in several eye diseases and after eye surgery. Unfortunately, there is no consensual view on ocular rigidity: it used to make a quite different sense for different people but still the same name. Foremost there is no clear consent between biomechanical engineers and ophthalmologists on the concept. Moreover ocular rigidity is occasionally characterized using various parameters with their different physical dimensions. In contrast to engineering approach, clinical approach to ocular rigidity claims to characterize the total mechanical response of the eyeball to its deformation without any detailed considerations on eye morphology or material properties of its tissues. Further to the previous chapter this section aims to describe clinical approach to ocular rigidity from the perspective of an engineer in an attempt to straighten out this concept, to show its advantages, disadvantages and various applications.},
  language  = {en}
}
@incollection{PfetschAbeleAltherretal.2021,
  author    = {Pfetsch, Marc E. and Abele, Eberhard and Altherr, Lena and B{\"o}lling, Christian and Br{\"o}tz, Nicolas and Dietrich, Ingo and Gally, Tristan and Geßner, Felix and Groche, Peter and Hoppe, Florian and Kirchner, Eckhard and Kloberdanz, Hermann and Knoll, Maximilian and Kolvenbach, Philip and Kuttich-Meinlschmidt, Anja and Leise, Philipp and Lorenz, Ulf and Matei, Alexander and Molitor, Dirk A. and Niessen, Pia and Pelz, Peter F. and Rexer, Manuel and Schmitt, Andreas and Schmitt, Johann M. and Schulte, Fiona and Ulbrich, Stefan and Weigold, Matthias},
  title     = {Strategies for mastering uncertainty},
  series = {Mastering uncertainty in mechanical engineering},
  booktitle = {Mastering uncertainty in mechanical engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78353-2},
  doi       = {10.1007/978-3-030-78354-9_6},
  pages     = {365 -- 456},
  year      = {2021},
  abstract  = {This chapter describes three general strategies to master uncertainty in technical systems: robustness, flexibility and resilience. It builds on the previous chapters about methods to analyse and identify uncertainty and may rely on the availability of technologies for particular systems, such as active components. Robustness aims for the design of technical systems that are insensitive to anticipated uncertainties. Flexibility increases the ability of a system to work under different situations. Resilience extends this characteristic by requiring a given minimal functional performance, even after disturbances or failure of system components, and it may incorporate recovery. The three strategies are described and discussed in turn. Moreover, they are demonstrated on specific technical systems.},
  language  = {en}
}
@incollection{LeiseAltherrSimonetal.2019,
  author    = {Leise, Philipp and Altherr, Lena and Simon, Nicolai and Pelz, Peter F.},
  title     = {Finding global-optimal gearbox designs for battery electric vehicles},
  series = {Optimization of complex systems - theory, models, algorithms and applications : WCGO 2019},
  booktitle = {Optimization of complex systems - theory, models, algorithms and applications : WCGO 2019},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-21802-7},
  doi       = {10.1007/978-3-030-21803-4_91},
  pages     = {916 -- 925},
  year      = {2019},
  abstract  = {In order to maximize the possible travel distance of battery electric vehicles with one battery charge, it is mandatory to adjust all components of the powertrain carefully to each other. While current vehicle designs mostly simplify the powertrain rigorously and use an electric motor in combination with a gearbox with only one fixed transmission ratio, the use of multi-gear systems has great potential. First, a multi-speed system is able to improve the overall energy efficiency. Secondly, it is able to reduce the maximum momentum and therefore to reduce the maximum current provided by the traction battery, which results in a longer battery lifetime. In this paper, we present a systematic way to generate multi-gear gearbox designs that—combined with a certain electric motor—lead to the most efficient fulfillment of predefined load scenarios and are at the same time robust to uncertainties in the load. Therefore, we model the electric motor and the gearbox within a Mixed-Integer Nonlinear Program, and optimize the efficiency of the mechanical parts of the powertrain. By combining this mathematical optimization program with an unsupervised machine learning algorithm, we are able to derive global-optimal gearbox designs for practically relevant momentum and speed requirements.},
  language  = {en}
}
@incollection{StengerAltherrAbel2019,
  author    = {Stenger, David and Altherr, Lena and Abel, Dirk},
  title     = {Machine learning and metaheuristics for black-box optimization of product families: a case-study investigating solution quality vs. computational overhead},
  series = {Operations Research Proceedings 2018},
  booktitle = {Operations Research Proceedings 2018},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-18499-5 (Print)},
  doi       = {10.1007/978-3-030-18500-8_47},
  pages     = {379 -- 385},
  year      = {2019},
  abstract  = {In product development, numerous design decisions have to be made. Multi-domain virtual prototyping provides a variety of tools to assess technical feasibility of design options, however often requires substantial computational effort for just a single evaluation. A special challenge is therefore the optimal design of product families, which consist of a group of products derived from a common platform. Finding an optimal platform configuration (stating what is shared and what is individually designed for each product) and an optimal design of all products simultaneously leads to a mixed-integer nonlinear black-box optimization model. We present an optimization approach based on metamodels and a metaheuristic. To increase computational efficiency and solution quality, we compare different types of Gaussian process regression metamodels adapted from the domain of machine learning, and combine them with a genetic algorithm. We illustrate our approach on the example of a product family of electrical drives, and investigate the trade-off between solution quality and computational overhead.},
  language  = {en}
}
@incollection{MuellerAltherrAholaetal.2018,
  author    = {M{\"u}ller, Tim M. and Altherr, Lena and Ahola, Marja and Schabel, Samuel and Pelz, Peter F.},
  title     = {Optimizing pressure screen systems in paper recycling: optimal system layout, component selection and operation},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-18499-5},
  doi       = {10.1007/978-3-030-18500-8_44},
  pages     = {355 -- 361},
  year      = {2018},
  abstract  = {Around 60\% of the paper worldwide is made from recovered paper. Especially adhesive contaminants, so called stickies, reduce paper quality. To remove stickies but at the same time keep as many valuable fibers as possible, multi-stage screening systems with several interconnected pressure screens are used. When planning such systems, suitable screens have to be selected and their interconnection as well as operational parameters have to be defined considering multiple conflicting objectives. In this contribution, we present a Mixed-Integer Nonlinear Program to optimize system layout, component selection and operation to find a suitable trade-off between output quality and yield.},
  language  = {en}
}
@incollection{StengerAltherrMuelleretal.2018,
  author    = {Stenger, David and Altherr, Lena and M{\"u}ller, Tankred and Pelz, Peter F.},
  title     = {Product family design optimization using model-based engineering techniques},
  series = {Operations Research Proceedings 2017},
  booktitle = {Operations Research Proceedings 2017},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-89919-0},
  doi       = {10.1007/978-3-319-89920-6_66},
  pages     = {495 -- 502},
  year      = {2018},
  abstract  = {Highly competitive markets paired with tremendous production volumes demand particularly cost efficient products. The usage of common parts and modules across product families can potentially reduce production costs. Yet, increasing commonality typically results in overdesign of individual products. Multi domain virtual prototyping enables designers to evaluate costs and technical feasibility of different single product designs at reasonable computational effort in early design phases. However, savings by platform commonality are hard to quantify and require detailed knowledge of e.g. the production process and the supply chain. Therefore, we present and evaluate a multi-objective metamodel-based optimization algorithm which enables designers to explore the trade-off between high commonality and cost optimal design of single products.},
  language  = {en}
}
@incollection{AltherrDoerigEdereretal.2017,
  author    = {Altherr, Lena and D{\"o}rig, Bastian and Ederer, Thorsten and Pelz, Peter Franz and Pfetsch, Marc and Wolf, Jan},
  title     = {A mixed-integer nonlinear program for the design of gearboxes},
  series = {Operations Research Proceedings 2016},
  booktitle = {Operations Research Proceedings 2016},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-55701-4},
  doi       = {10.1007/978-3-319-55702-1_31},
  pages     = {227 -- 233},
  year      = {2017},
  abstract  = {Gearboxes are mechanical transmission systems that provide speed and torque conversions from a rotating power source. Being a central element of the drive train, they are relevant for the efficiency and durability of motor vehicles. In this work, we present a new approach for gearbox design: Modeling the design problem as a mixed-integer nonlinear program (MINLP) allows us to create gearbox designs from scratch for arbitrary requirements and—given enough time—to compute provably globally optimal designs for a given objective. We show how different degrees of freedom influence the runtime and present an exemplary solution.},
  language  = {en}
}
@incollection{LeiseAltherrPelz2018,
  author    = {Leise, Philipp and Altherr, Lena and Pelz, Peter F.},
  title     = {Energy-Efficient design of a water supply system for skyscrapers by mixed-integer nonlinear programming},
  series = {Operations Research Proceedings 2017},
  booktitle = {Operations Research Proceedings 2017},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-89919-0},
  doi       = {10.1007/978-3-319-89920-6_63},
  year      = {2018},
  abstract  = {The energy-efficiency of technical systems can be improved by a systematic design approach. Technical Operations Research (TOR) employs methods known from Operations Research to find a global optimal layout and operation strategy of technical systems. We show the practical usage of this approach by the systematic design of a decentralized water supply system for skyscrapers. All possible network options and operation strategies are modeled by a Mixed-Integer Nonlinear Program. We present the optimal system found by our approach and highlight the energy savings compared to a conventional system design.},
  language  = {en}
}
@incollection{Timme2022,
  author    = {Timme, Michael},
  title     = {Wettbewerbsregeln (\S\S 24-27)},
  series = {M{\"u}nchener Kommentar zum europ{\"a}ischen und deutschen Wettbewerbsrecht : Kartellrecht, Beihilfenrecht, Vergaberecht / hrsg von Franz J{\"u}rgen S{\"a}cker / Band 2: Deutsches Wettbewerbsrecht Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB), \S\S 1-96, 185, 186},
  booktitle = {M{\"u}nchener Kommentar zum europ{\"a}ischen und deutschen Wettbewerbsrecht : Kartellrecht, Beihilfenrecht, Vergaberecht / hrsg von Franz J{\"u}rgen S{\"a}cker / Band 2: Deutsches Wettbewerbsrecht Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB), \S\S 1-96, 185, 186},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-75876-8},
  pages     = {589 -- 608},
  year      = {2022},
  language  = {de}
}
@incollection{BorggrafeOhndorfDachwaldetal.2012,
  author    = {Borggrafe, Andreas and Ohndorf, Andreas and Dachwald, Bernd and Seboldt, Wolfgang},
  title     = {Analysis of interplanetary solar sail trajectories with attitude dynamics},
  series = {Dynamics and Control of Space Systems 2012},
  booktitle = {Dynamics and Control of Space Systems 2012},
  publisher = {Univelt Inc},
  address   = {San Diego},
  isbn      = {978-0-87703-587-9},
  pages     = {1553 -- 1569},
  year      = {2012},
  abstract  = {We present a new approach to the problem of optimal control of solar sails for low-thrust trajectory optimization. The objective was to find the required control torque magnitudes in order to steer a solar sail in interplanetary space. A new steering strategy, controlling the solar sail with generic torques applied about the spacecraft body axes, is integrated into the existing low-thrust trajectory optimization software InTrance. This software combines artificial neural networks and evolutionary algorithms to find steering strategies close to the global optimum without an initial guess. Furthermore, we implement a three rotational degree-of-freedom rigid-body attitude dynamics model to represent the solar sail in space. Two interplanetary transfers to Mars and Neptune are chosen to represent typical future solar sail mission scenarios. The results found with the new steering strategy are compared to the existing reference trajectories without attitude dynamics. The resulting control torques required to accomplish the missions are investigated, as they pose the primary requirements to a real on-board attitude control system.},
  language  = {en}
}
@incollection{Kurz2022,
  author    = {Kurz, Melanie},
  title     = {Vom Werkbundstreit bis zur Papierformatnormung - welche Rolle der Chemie-Nobelpreistr{\"a}ger Friedrich Wilhelm Ostwald bei Typisierungsbestrebungen im Design spielt},
  series = {Raster, Regeln, Ratio : Systematiken und Normungen des 20. Jahrhunderts},
  volume    = {2022},
  booktitle = {Raster, Regeln, Ratio : Systematiken und Normungen des 20. Jahrhunderts},
  publisher = {avedition},
  address   = {Stuttgart},
  isbn      = {978-3-89986-380-2},
  pages     = {6 -- 17},
  year      = {2022},
  language  = {de}
}
@incollection{SchubaHoefken2022,
  author    = {Schuba, Marko and H{\"o}fken, Hans-Wilhelm},
  title     = {Cybersicherheit in Produktion, Automotive und intelligenten Geb{\"a}uden},
  series = {IT-Sicherheit - Technologien und Best Practices f{\"u}r die Umsetzung im Unternehmen},
  booktitle = {IT-Sicherheit - Technologien und Best Practices f{\"u}r die Umsetzung im Unternehmen},
  publisher = {Carl Hanser Verlag},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-47223-5},
  doi       = {10.3139/9783446473478.012},
  pages     = {193 -- 218},
  year      = {2022},
  language  = {de}
}
@incollection{EnglaenderKaminskiSchuba2022,
  author    = {Engl{\"a}nder, Jacques and Kaminski, Lars and Schuba, Marko},
  title     = {Informationssicherheitsmanagement},
  series = {Digitalisierungs- und Informationsmanagement},
  booktitle = {Digitalisierungs- und Informationsmanagement},
  publisher = {Springer Vieweg},
  address   = {Berlin},
  isbn      = {978-3-662-63757-9},
  doi       = {10.1007/978-3-662-63758-6_15},
  pages     = {373 -- 398},
  year      = {2022},
  abstract  = {Daten und Informationen sind die wichtigsten Ressourcen vieler Unternehmen und m{\"u}ssen daher entsprechend gesch{\"u}tzt werden. Getrieben durch die erh{\"o}hte Vernetzung von Informationstechnologie, die h{\"o}here Offenheit infolge datengetriebener Dienstleistungen und eine starke Zunahme an Datenquellen, r{\"u}cken die Gefahren von Informationsdiebstahl, -manipulation und -verlust in den Fokus von produzierenden Unternehmen. Auf dem Weg zum lern- und wandlungsf{\"a}higen Unternehmen kann dies zu einem großen Hindernis werden, da einerseits zu hohe Sicherheitsanforderungen neue Entwicklungen beschr{\"a}nken, andererseits wegen des Mangels an ausreichenden Informationssicherheitskonzepten Unternehmen weniger Innovationen wagen. Deshalb bedarf es individuell angepasster Konzepte f{\"u}r die Bereiche IT-Security, IT-Safety und Datenschutz f{\"u}r vernetzte Produkte, Produktion und Arbeitspl{\"a}tze. Bei der Entwicklung und Durchsetzung dieser Konzepte steht der Faktor Mensch im Zentrum aller {\"U}berlegungen. In diesem Kapitel wird dargestellt, wie der Faktor Mensch bei der Erstellung von Informationssicherheitskonzepten in verschiedenen Phasen zu beachten ist. Beginnend mit der Integration von Informationssystemen und damit verbundenen Sicherheitsmaßnahmen, {\"u}ber die Administration, bis hin zur Anwendung durch den Endnutzer, werden Methoden beschrieben, die den Menschen, verbunden mit seinem Mehrwert wie auch den Risiken, einschließen. Dabei werden sowohl Grundlagen aufgezeigt als auch Konzepte vorgestellt, mit denen Entscheider in der Unternehmens-IT Leitlinien f{\"u}r die Informationssicherheit festlegen k{\"o}nnen.},
  language  = {de}
}