@masterthesis{Pauls2024,
  type      = {Bachelor Thesis},
  author    = {Pauls, Benjamin},
  title     = {Energiewende im Stromsektor: Nachhaltigkeit {\"u}ber Umweltschutz hinaus},
  school      = {Fachhochschule Aachen},
  pages     = {IV, 88 Seiten},
  year      = {2024},
  abstract  = {Die Energiewende wird h{\"a}ufig als „nachhaltig" bezeichnet, das genaue Begriffsverst{\"a}ndnis bleibt jedoch vage. Diese Transformation von fossilen und nuklearen hin zu erneuerbaren Energiequellen steht im Fokus der Treibhausgasneutralit{\"a}t. So soll dem fortschreitenden Klimawandel entgegengetreten werden. Das Thema der vorliegenden Arbeit ist die Definition eines m{\"o}glichen Verst{\"a}ndnisses von „Nachhaltigkeit" in der Energiewende des deutschen Stromsektors. Die leitenden Forschungsfragen lauten: Was kann im Zusammenhang mit der Energiewende im Stromsektor Deutschlands unter Nachhaltigkeit verstanden werden? Inwieweit unterscheidet sich dieses Verst{\"a}ndnis von der bisherigen Herangehensweise? Die Datenbasis zur Beantwortung dieser liefern sechs leitfadengest{\"u}tzte Expert:inneninterviews. Als Analysemethode dient die inhaltliche Strukturierung nach Mayring (2015). Die qualitative Studie hat gezeigt, dass eine nachhaltige Energiewende den Menschen und die Natur zentralisiert. Weiter aufgeschl{\"u}sselt stehen die drei Nachhaltigkeitsdimensionen und die Generationengerechtigkeit. Dabei dient die {\"o}konomische Dimension der sozialen und {\"o}kologischen. Wichtig sind die Inklusion und Beteiligung von Bev{\"o}lkerung, Unternehmen und Politik. Gleichzeitig ist sie Herausforderung und Chance f{\"u}r einen positiven gesellschaftlichen Wandel. Technisch dienen Windenergie- und Photovoltaikanlagen als Energielieferanten und Wasserstoffsysteme als Zwischenspeicher, Stabilit{\"a}tssicherung und zur Kopplung der Sektoren. Damit ist Nachhaltigkeit die Chance, die Energiewende richtig zu gestalten und damit {\"u}ber Klimaneutralit{\"a}t hinauszugehen},
  language  = {de}
}
@book{StaatDigelTrzewiketal.2024,
  author    = {Staat, Manfred and Digel, Ilya and Trzewik, J{\"u}rgen and Sielemann, Stefanie and Erni, Daniel and Zylka, Waldemar},
  title     = {Symposium Proceedings; 4th YRA MedTech Symposium 2024 : February 1 / 2024 / FH Aachen},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-65-3},
  doi       = {10.17185/duepublico/81475},
  pages     = {40 Seiten},
  year      = {2024},
  language  = {en}
}
@inproceedings{Tepecik2024,
  author    = {Tepecik, Atakan},
  title     = {AstroBioLab: Review of technical and bioanalytical approaches},
  series = {YRA MedTech Symposium (2024)},
  booktitle = {YRA MedTech Symposium (2024)},
  editor    = {Digel, Ilya and Staat, Manfred and Trzewik, J{\"u}rgen and Sielemann, Stefanie and Erni, Daniel and Zylka, Waldemar},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-65-3},
  doi       = {10.17185/duepublico/81475},
  pages     = {33 -- 34},
  year      = {2024},
  abstract  = {This study presents the concept of AstroBioLab, an autonomous astrobiological field laboratory tailored for the exploration of (sub)glacial habitats. AstroBioLab is an integral component of the TRIPLE (Technologies for Rapid Ice Penetration and subglacial Lake Exploration) DLR-funded project, aimed at advancing astrobiology research through the development and deployment of innovative technologies. AstroBioLab integrates diverse measurement techniques such as fluorescence microscopy, DNA sequencing and fluorescence spectrometry, while leveraging microfluidics for efficient sample delivery and preparation.},
  language  = {en}
}
@article{HoffstadtNikolauszKrafftetal.2024,
  author    = {Hoffstadt, Kevin and Nikolausz, Marcell and Krafft, Simone and Bonatelli, Maria and Kumar, Vivekanantha and Harms, Hauke and Kuperjans, Isabel},
  title     = {Optimization of the ex situ biomethanation of hydrogen and carbon dioxide in a novel meandering plug flow reactor: start-up phase and flexible operation},
  series = {Bioengineering},
  volume    = {11},
  journal   = {Bioengineering},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2306-5354},
  doi       = {10.3390/bioengineering11020165},
  pages     = {18 Seiten},
  year      = {2024},
  language  = {en}
}
@article{BornheimGriegerBlanecketal.2024,
  author    = {Bornheim, Tobias and Grieger, Niklas and Blaneck, Patrick Gustav and Bialonski, Stephan},
  title     = {Speaker Attribution in German Parliamentary Debates with QLoRA-adapted Large Language Models},
  series = {Journal for language technology and computational linguistics : JLCL},
  volume    = {37},
  journal   = {Journal for language technology and computational linguistics : JLCL},
  number    = {1},
  publisher = {Gesellschaft f{\"u}r Sprachtechnologie und Computerlinguistik},
  address   = {Regensburg},
  issn      = {2190-6858},
  doi       = {10.21248/jlcl.37.2024.244},
  pages     = {13 Seiten},
  year      = {2024},
  abstract  = {The growing body of political texts opens up new opportunities for rich insights into political dynamics and ideologies but also increases the workload for manual analysis. Automated speaker attribution, which detects who said what to whom in a speech event and is closely related to semantic role labeling, is an important processing step for computational text analysis. We study the potential of the large language model family Llama 2 to automate speaker attribution in German parliamentary debates from 2017-2021. We fine-tune Llama 2 with QLoRA, an efficient training strategy, and observe our approach to achieve competitive performance in the GermEval 2023 Shared Task On Speaker Attribution in German News Articles and Parliamentary Debates. Our results shed light on the capabilities of large language models in automating speaker attribution, revealing a promising avenue for computational analysis of political discourse and the development of semantic role labeling systems.},
  language  = {en}
}
@masterthesis{Eichler2024,
  type      = {Bachelor Thesis},
  author    = {Eichler, Sophie},
  title     = {Digitales Arztpraxis Management},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {139 Seiten},
  year      = {2024},
  abstract  = {Das Ziel der digitalen Arztpraxis-Management-App „PraXma" ist es, die Organisation von Arztpraxen, sowie auch das Patient:innen- und Terminmanagement einer Praxis effizienter und reibungsloser zu gestalten. Da 83 Prozent der Patient:innen bei der Digitalisierung des deutschen Gesundheitswesens Nachholbedarf sehen, besteht ein erheblicher Bedarf an Weiterentwicklung in dieser Branche. „PraXma" gew{\"a}hrleistet Patient:innen mithilfe verschiedener Funktionen einen angenehmeren Arztbesuch. Dazu z{\"a}hlen die patientenorientierte Terminvergabe, der kategorisierte {\"U}berblick {\"u}ber Vitalwerte und P{\"a}sse und die Einsicht in pers{\"o}nliche Dokumente, wie Befunde, Rezepte und mehr. Auch {\"A}rzt:innen profitieren durch „PraXma" von einer Automatisierung ihrer allt{\"a}glichen Abl{\"a}ufe und minimieren so {\"U}berstunden und Stress.},
  language  = {de}
}
@article{HafidiElHatkaSchmitzetal.2024,
  author    = {Hafidi, Youssef and El Hatka, Hicham and Schmitz, Dominik and Krauss, Manuel and Pettrak, J{\"u}rgen and Biel, Markus and Ittobane, Najim},
  title     = {Sustainable soil additives for water and micronutrient supply: swelling and chelating properties of polyaspartic acid hydrogels utilizing newly developed crosslinkers},
  series = {Gels},
  volume    = {10},
  journal   = {Gels},
  number    = {3},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2310-2861},
  doi       = {10.3390/gels10030170},
  pages     = {Artikel 170},
  year      = {2024},
  abstract  = {Drought and water shortage are serious problems in many arid and semi-arid regions. This problem is getting worse and even continues in temperate climatic regions due to climate change. To address this problem, the use of biodegradable hydrogels is increasingly important for the application as water-retaining additives in soil. Furthermore, efficient (micro-)nutrient supply can be provided by the use of tailored hydrogels. Biodegradable polyaspartic acid (PASP) hydrogels with different available (1,6-hexamethylene diamine (HMD) and L-lysine (LYS)) and newly developed crosslinkers based on diesters of glycine (GLY) and (di-)ethylene glycol (DEG and EG, respectively) were synthesized and characterized using Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) and regarding their swelling properties (kinetic, absorbency under load (AUL)) as well as biodegradability of PASP hydrogel. Copper (II) and zinc (II), respectively, were loaded as micronutrients in two different approaches: in situ with crosslinking and subsequent loading of prepared hydrogels. The results showed successful syntheses of di-glycine-ester-based crosslinkers. Hydrogels with good water-absorbing properties were formed. Moreover, the developed crosslinking agents in combination with the specific reaction conditions resulted in higher water absorbency with increased crosslinker content used in synthesis (10\% vs. 20\%). The prepared hydrogels are candidates for water-storing soil additives due to the biodegradability of PASP, which is shown in an exemple. The incorporation of Cu(II) and Zn(II) ions can provide these micronutrients for plant growth.},
  language  = {en}
}
@masterthesis{Lambertus2024,
  type      = {Bachelor Thesis},
  author    = {Lambertus, Jan-Michael},
  title     = {CardboardCastle},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {60 Seiten},
  year      = {2024},
  abstract  = {„CardboardCastle" ist ein 3D-Animationsfilm. Der Film zeigt die lebendig gewordene Welt zweier K{\"o}nigreiche aus Pappe, die in einem Streit um einen magischen Zauberstab verwickelt sind. Das Projekt beweist, dass es m{\"o}glich ist, mit der Software „Blender" einen vollwertigen und hochwertigen 3D-Animationsfilm zu erstellen. Dabei wurden alle Assets bis auf Texturen selbst hergestellt. Die virtuelle Pappe spielt hierbei eine fundamentale Rolle, f{\"u}r diese wurde ein vollkommen neuer Workflow entwickelt, welcher es erm{\"o}glicht, realistische Pappe zu visualisieren. „CardboardCastle" setzt auf eine cinematische Inszenierung von Licht und vereint technisches Wissen mit unterhaltenden Inhalten. Dabei zeigt er die kindliche Vorstellungskraft und l{\"a}dt die Zuschauer ein, sich an ihre eigenen kindlichen Fantasien zu erinnern.},
  language  = {de}
}
@masterthesis{Erkens2024,
  type      = {Bachelor Thesis},
  author    = {Erkens, Cedric},
  title     = {En(Joy)Chroma : Entwicklung einer medien{\"u}bergreifenden Werbekampagne f{\"u}r den Brillenhersteller EnChroma},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {133 Seiten},
  year      = {2024},
  abstract  = {Weltweit sind 350 Millionen Menschen von Farbenfehlsichtigkeit betroffen, doch nur wenige wissen, dass es eine L{\"o}sung f{\"u}r genau dieses Problem gibt. Die ausgearbeitete Werbekampagne und neue Markenkommunikation f{\"u}r EnChroma soll genau diese Menschen ermutigen, sich mit ihrer Krankheit auseinanderzusetzen und das breite Konzept der L{\"o}sung zu verstehen. Die speziellen Brillen erm{\"o}glichen es den Menschen, Farben im Alltag und Berufsleben in echt wahrzunehmen und diese besser differenzieren zu k{\"o}nnen. Unsere Welt ist farbcodiert und deshalb ist es besonders wichtig, dass diese Menschen auf das Produkt aufmerksam gemacht werden.},
  language  = {de}
}
@inproceedings{EggertSchadeBroehletal.2024,
  author    = {Eggert, Mathias and Schade, Maximilian and Br{\"o}hl, Florian and Moriz, Alexander},
  title     = {Generating synthetic LiDAR point cloud data for object detection using the Unreal Game Engine},
  series = {Design Science Research for a Resilient Future (DESRIST 2024)},
  booktitle = {Design Science Research for a Resilient Future (DESRIST 2024)},
  editor    = {Mandviwalla, Munir and S{\"o}llner, Matthias and Tuunanen, Tuure},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-61174-2 (Print)},
  doi       = {10.1007/978-3-031-61175-9_20},
  pages     = {295 -- 309},
  year      = {2024},
  abstract  = {Object detection based on artificial intelligence is ubiquitous in today's computer vision research and application. The training of the neural networks for object detection requires large and high-quality datasets. Besides datasets based on image data, datasets derived from point clouds offer several advantages. However, training datasets are sparse and their generation requires a lot of effort, especially in industrial domains. A solution to this issue offers the generation of synthetic point cloud data. Based on the design science research method, the work at hand proposes an approach and its instantiation for generating synthetic point cloud data based on the Unreal Engine. The point cloud quality is evaluated by comparing the synthetic cloud to a real-world point cloud. Within a practical example the applicability of the Unreal Game engine for synthetic point cloud generation could be successfully demonstrated.},
  language  = {de}
}
@article{Timme2024,
  author    = {Timme, Michael},
  title     = {Kaufvertrag: Das Zusammentreffen von Beschaffenheitsvereinbarung und Gew{\"a}hrleistungsausschluss - ein Spannungsverh{\"a}ltnis},
  series = {Monatsschrift f{\"u}r Deutsches Recht},
  volume    = {78},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht},
  number    = {12},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {2194-4202 (online)},
  doi       = {10.9785/mdtr-2024-781203},
  pages     = {745 -- 748},
  year      = {2024},
  abstract  = {Wer A sagt, muss zumindest im Kaufrecht nicht immer B sagen: Es kommt nicht selten vor, dass sich in einem Kaufvertrag einerseits ein wirksamer Ausschluss der Gew{\"a}hrleistung des Verk{\"a}ufers f{\"u}r Sachm{\"a}ngel findet, die Parteien aber andererseits gleichwohl eine Beschaffenheitsvereinbarung f{\"u}r bestimmte Eigenschaften vertraglich festlegen. In diesem Problemfeld f{\"u}hrt eine aktuelle Entscheidung des BGH zu weiteren Kl{\"a}rungen f{\"u}r die Praxis (BGH, Urt. v. 10.4.2024 - VIII ZR 161/23, MDR 2024, 706). Der folgende Beitrag setzt sich mit den vielf{\"a}ltigen Aspekten der Entscheidung auseinander und erl{\"a}utert, aus welchen Gr{\"u}nden der BGH dem K{\"a}ufer einige goldene Br{\"u}cken f{\"u}r einen Schadensersatzanspruch gebaut hat.},
  language  = {de}
}
@article{OezsoyluAliaziziWagneretal.2024,
  author    = {{\"O}zsoylu, Dua and Aliazizi, Fereshteh and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Template bacteria-free fabrication of surface imprinted polymer-based biosensor for E. coli detection using photolithographic mimics: Hacking bacterial adhesion},
  series = {Biosensors and Bioelectronics},
  volume    = {261},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4235 (eISSN)},
  doi       = {10.1016/j.bios.2024.116491},
  pages     = {11 Seiten},
  year      = {2024},
  abstract  = {As one class of molecular imprinted polymers (MIPs), surface imprinted polymer (SIP)-based biosensors show great potential in direct whole-bacteria detection. Micro-contact imprinting, that involves stamping the template bacteria immobilized on a substrate into a pre-polymerized polymer matrix, is the most straightforward and prominent method to obtain SIP-based biosensors. However, the major drawbacks of the method arise from the requirement for fresh template bacteria and often non-reproducible bacteria distribution on the stamp substrate. Herein, we developed a positive master stamp containing photolithographic mimics of the template bacteria (E. coli) enabling reproducible fabrication of biomimetic SIP-based biosensors without the need for the "real" bacteria cells. By using atomic force and scanning electron microscopy imaging techniques, respectively, the E. coli-capturing ability of the SIP samples was tested, and compared with non-imprinted polymer (NIP)-based samples and control SIP samples, in which the cavity geometry does not match with E. coli cells. It was revealed that the presence of the biomimetic E. coli imprints with a specifically designed geometry increases the sensor E. coli-capturing ability by an "imprinting factor" of about 3. These findings show the importance of geometry-guided physical recognition in bacterial detection using SIP-based biosensors. In addition, this imprinting strategy was employed to interdigitated electrodes and QCM (quartz crystal microbalance) chips. E. coli detection performance of the sensors was demonstrated with electrochemical impedance spectroscopy (EIS) and QCM measurements with dissipation monitoring technique (QCM-D).},
  language  = {en}
}
@book{DrummScheuermannWeidner2024,
  author    = {Drumm, Christian and Scheuermann, Bernd and Weidner, Stefan},
  title     = {Introduction to SAP S/4HANA® : The official companion book based on model company Global Bike-for learning, teaching, and training},
  publisher = {Espresso Tutorials},
  address   = {Gleichen},
  isbn      = {9783960122685},
  pages     = {619 Seiten},
  year      = {2024},
  abstract  = {This easy-to-understand introduction to SAP S/4HANA guides you through the central processes in sales, purchasing and procurement, finance, production, and warehouse management using the model company Global Bike. Familiarize yourself with the basics of business administration, the relevant organizational data, master data, and transactional data, as well as a selection of core business processes in SAP. Using practical examples and tutorials, you will soon become an SAP S/4HANA professional! Tutorials and exercises for beginners, advanced users, and experts make it easy for you to practice your new knowledge. The prerequisite for this book is access to an SAP S/4HANA client with Global Bike version 4.1. - Business fundamentals and processes in the SAP system - Sales, purchasing and procurement, production, finance, and warehouse management - Tutorials at different qualification levels, exercises, and recap of case studies - Includes extensive download material for students, lecturers, and professors},
  language  = {en}
}
@article{HaegerJolmesOyenetal.2024,
  author    = {Haeger, Gerrit and Jolmes, Tristan and Oyen, Sven and Jaeger, Karl-Erich and Bongaerts, Johannes and Sch{\"o}rken, Ulrich and Siegert, Petra},
  title     = {Novel recombinant aminoacylase from Paraburkholderia monticola capable of N-acyl-amino acid synthesis},
  series = {Applied Microbiology and Biotechnology},
  journal   = {Applied Microbiology and Biotechnology},
  number    = {108},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0614},
  doi       = {10.1007/s00253-023-12868-8},
  pages     = {14 Seiten},
  year      = {2024},
  abstract  = {N-Acyl-amino acids can act as mild biobased surfactants, which are used, e.g., in baby shampoos. However, their chemical synthesis needs acyl chlorides and does not meet sustainability criteria. Thus, the identification of biocatalysts to develop greener synthesis routes is desirable. We describe a novel aminoacylase from Paraburkholderia monticola DSM 100849 (PmAcy) which was identified, cloned, and evaluated for its N-acyl-amino acid synthesis potential. Soluble protein was obtained by expression in lactose autoinduction medium and co-expression of molecular chaperones GroEL/S. Strep-tag affinity purification enriched the enzyme 16-fold and yielded 15 mg pure enzyme from 100 mL of culture. Biochemical characterization revealed that PmAcy possesses beneficial traits for industrial application like high temperature and pH-stability. A heat activation of PmAcy was observed upon incubation at temperatures up to 80 °C. Hydrolytic activity of PmAcy was detected with several N-acyl-amino acids as substrates and exhibited the highest conversion rate of 773 U/mg with N-lauroyl-L-alanine at 75 °C. The enzyme preferred long-chain acyl-amino-acids and displayed hardly any activity with acetyl-amino acids. PmAcy was also capable of N-acyl-amino acid synthesis with good conversion rates. The best synthesis results were obtained with the cationic L-amino acids L-arginine and L-lysine as well as with L-leucine and L-phenylalanine. Exemplarily, L-phenylalanine was acylated with fatty acids of chain lengths from C8 to C18 with conversion rates of up to 75\%. N-lauroyl-L-phenylalanine was purified by precipitation, and the structure of the reaction product was verified by LC-MS and NMR.},
  language  = {en}
}
@article{BoehnischBraunMuscarelloetal.2024,
  author    = {B{\"o}hnisch, Nils and Braun, Carsten and Muscarello, Vincenzo and Marzocca, Pier},
  title     = {About the wing and whirl flutter of a slender wing-propeller system},
  series = {Journal of Aircraft},
  journal   = {Journal of Aircraft},
  publisher = {AIAA},
  address   = {Reston, Va.},
  issn      = {1533-3868},
  doi       = {10.2514/1.C037542},
  pages     = {1 -- 14},
  year      = {2024},
  abstract  = {Next-generation aircraft designs often incorporate multiple large propellers attached along the wingspan (distributed electric propulsion), leading to highly flexible dynamic systems that can exhibit aeroelastic instabilities. This paper introduces a validated methodology to investigate the aeroelastic instabilities of wing-propeller systems and to understand the dynamic mechanism leading to wing and whirl flutter and transition from one to the other. Factors such as nacelle positions along the wing span and chord and its propulsion system mounting stiffness are considered. Additionally, preliminary design guidelines are proposed for flutter-free wing-propeller systems applicable to novel aircraft designs. The study demonstrates how the critical speed of the wing-propeller systems is influenced by the mounting stiffness and propeller position. Weak mounting stiffnesses result in whirl flutter, while hard mounting stiffnesses lead to wing flutter. For the latter, the position of the propeller along the wing span may change the wing mode shapes and thus the flutter mechanism. Propeller positions closer to the wing tip enhance stability, but pusher configurations are more critical due to the mass distribution behind the elastic axis.},
  language  = {en}
}
@techreport{BirmansSchickTamborninoetal.2024,
  type      = {Working Paper},
  author    = {Birmans, Katrin and Schick, Elena and Tambornino, Philipp and Ullrich, Anna Valentine},
  title     = {Ingenieurwissenschaften im Fokus: Zug{\"a}nge zu einem effektiven Forschungsdatenmanagement an HAW},
  doi       = {10.5281/zenodo.12545429},
  pages     = {49 Seiten},
  year      = {2024},
  abstract  = {Im Rahmen der Love Data Week vom 12. bis 16.02.2024 haben die BMBF-Projekte FDM2_TH_Koeln der TH K{\"o}ln (FK 16FDFH105) und Persist@HAW der FH Aachen (FK 16FDFH129) am 15.02.2024 gemeinsam eine Online-Veranstaltung mit dem Titel „Ingenieurwissenschaften im Fokus: Zug{\"a}nge zu einem effektiven Forschungsdatenmanagement an HAW" angeboten. Diese richtete sich an Forschende aus den Ingenieurwissenschaften, die einen ersten Zugang zum Thema Forschungsdatenmanagement (FDM) suchen und erfahren m{\"o}chten, welche speziellen Angebote f{\"u}r die Daten aus den Ingenieurwissenschaften existieren. In der Veranstaltung wurden wesentliche Aspekte des Forschungsdatenmanagements entlang des Datenlebenszyklus beleuchtet. Ziel war es, den Teilnehmenden praxisnahe Einblicke und Hilfestellungen zu einem effektiven Umgang mit Forschungsdaten an Hochschulen f{\"u}r Angewandte Wissenschaften (HAW) zu bieten. Durch Beispiele und konkrete Empfehlungen wurde das Thema zug{\"a}nglich gemacht.},
  language  = {de}
}
@techreport{BirmansTamborninoUllrich2024,
  type      = {Working Paper},
  author    = {Birmans, Katrin and Tambornino, Philipp and Ullrich, Anna Valentine},
  title     = {5 Gr{\"u}nde f{\"u}r Coscine - Handreichung f{\"u}r Forschende an HAW},
  doi       = {10.5281/zenodo.12156734},
  pages     = {1 Seite},
  year      = {2024},
  abstract  = {Welche Vorteile bietet die Forschungsdatenmanagement-Plattform Coscine f{\"u}r die Verwaltung von Daten in Forschungsprojekten? Hierzu gibt die Handreichung einen schnellen {\"U}berblick {\"u}ber den landesgef{\"o}rderten Dienst Coscine f{\"u}r Forschende und FDM-Service-Personal an HAW in NRW (DH.NRW-Hochschulen). FDM-Service-Mitarbeitende k{\"o}nnen die Handreichung in ihrer Beratung zu Coscine einsetzen und mit der Eingabemaske in der Kopfzeile des Dokuments auf ihre Hochschule anpassen.},
  language  = {de}
}
@techreport{BarnatArntzBerneckeretal.2024,
  type      = {Working Paper},
  author    = {Barnat, Miriam and Arntz, Kristian and Bernecker, Andreas and Fissabre, Anke and Franken, Norbert and Goldbach, Daniel and H{\"u}ning, Felix and J{\"o}rissen, J{\"o}rg and Kirsch, Ansgar and Pettrak, J{\"u}rgen and Rexforth, Matthias and Josef, Rosenkranz and Terstegge, Andreas},
  title     = {Strategische Gestaltung von Studieng{\"a}ngen f{\"u}r die Zukunft: Ein kollaborativ entwickeltes Self-Assessment},
  series = {Hochschulforum Digitalisierung - Diskussionspapier},
  journal   = {Hochschulforum Digitalisierung - Diskussionspapier},
  publisher = {Stifterverband f{\"u}r die Deutsche Wissenschaft},
  address   = {Berlin},
  issn      = {2365-7081},
  pages     = {16 Seiten},
  year      = {2024},
  abstract  = {Das Diskussionspapier beschreibt einen Prozess an der FH Aachen zur Entwicklung und Implementierung eines Self-Assessment-Tools f{\"u}r Studieng{\"a}nge. Dieser Prozess zielte darauf ab, die Relevanz der Themen Digitalisierung, Internationalisierung und Nachhaltigkeit in Studieng{\"a}ngen zu st{\"a}rken. Durch Workshops und kollaborative Entwicklung mit Studiendekan:innen entstand ein Fragebogen, der zur Reflexion und strategischen Weiterentwicklung der Studieng{\"a}nge dient.},
  language  = {de}
}
@inproceedings{RuettersBragardDolls2024,
  author    = {R{\"u}tters, Ren{\´e} and Bragard, Michael and Dolls, Sarah},
  title     = {The Inverted Rotary Pendulum: Facilitating Practical Teaching in Advanced Control Engineering},
  series = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2165-9559},
  doi       = {10.1109/EDUCON60312.2024.10578937},
  pages     = {5 Seiten},
  year      = {2024},
  abstract  = {This paper outlines a practical approach to teach control engineering principles, with an inverted rotary pendulum, serving as an illustrative example. It shows how the pendulum is embedded in an advanced course of control engineering. This approach is incorporated into a flipped-classroom concept, as well as classical teaching concepts, offering students practical experience in control engineering. In addition, the design of the pendulum is shown, using a Raspberry Pi as the target platform for Matlab Simulink. This pendulum can be used in the classroom to evaluate the controller design mentioned above. It is analysed if the use of the pendulum generates a deeper understanding of the learning contents.},
  language  = {en}
}
@inproceedings{BeckerBragard2024,
  author    = {Becker, Tim and Bragard, Michael},
  title     = {Low-Voltage DC Training Lab for Electric Drives - Optimizing the Balancing Act Between High Student Throughput and Individual Learning Speed},
  series = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2165-9559},
  doi       = {10.1109/EDUCON60312.2024.10578902},
  pages     = {8 Seiten},
  year      = {2024},
  abstract  = {After a brief introduction of conventional laboratory structures, this work focuses on an innovative and universal approach for a setup of a training laboratory for electric machines and drive systems. The novel approach employs a central 48 V DC bus, which forms the backbone of the structure. Several sets of DC machine, asynchronous machine and synchronous machine are connected to this bus. The advantages of the novel system structure are manifold, both from a didactic and a technical point of view: Student groups can work on their own performance level in a highly parallelized and at the same time individualized way. Additional training setups (similar or different) can easily be added. Only the total power dissipation has to be provided, i.e. the DC bus balances the power flow between the student groups. Comparative results of course evaluations of several cohorts of students are shown.},
  language  = {en}
}
@incollection{Fissabre2024,
  author    = {Fissabre, Anke},
  title     = {Eine moderne Sainte-Chapelle in K{\"o}ln. Otto Bartnings Stahlkirche auf der Pressa 1928},
  series = {Baugedanken: Einsichten, Ansichten, Aussichten f{\"u}r Jan Pieper zum 80. Geburtstag},
  booktitle = {Baugedanken: Einsichten, Ansichten, Aussichten f{\"u}r Jan Pieper zum 80. Geburtstag},
  editor    = {Naujokat, Anke and Hake, Verena and Schindler, Bruno and Sch{\"o}tten, Bj{\"o}rn},
  publisher = {Geym{\"u}ller Verag f{\"u}r Architektur},
  address   = {Aachen},
  isbn      = {978-3-943164-87-9},
  pages     = {66 -- 81},
  year      = {2024},
  language  = {de}
}
@article{ChwallekNawrathKrastinaetal.2024,
  author    = {Chwallek, Constanze and Nawrath, Lara and Krastina, Anzelika and Bruksle, Ieva},
  title     = {Supportive research on sustainable entrepreneurship and business practices},
  series = {SECA Sustainable Entrepreneurship for Climate Action},
  journal   = {SECA Sustainable Entrepreneurship for Climate Action},
  number    = {3},
  publisher = {Lapland University of Applied Sciences Ltd},
  address   = {Rovaniemi},
  isbn      = {978-952-316-514-4 (pdf)},
  issn      = {2954-1654 (on-line publication)},
  pages     = {67 Seiten},
  year      = {2024},
  language  = {en}
}
@unpublished{SchmuellingGuetzlaffCzupalla2024,
  author    = {Schm{\"u}lling, Max and G{\"u}tzlaff, Joel and Czupalla, Markus},
  title     = {A thermal simulation environment for moving objects on the lunar surface},
  doi       = {10.21203/rs.3.rs-3902363/v1},
  pages     = {12 Seiten},
  year      = {2024},
  abstract  = {This paper presents a thermal simulation environment for moving objects on the lunar surface. The goal of the thermal simulation environment is to enable the reliable prediction of the temperature development of a given object on the lunar surface by providing the respective heat fluxes for a mission on a given travel path. The user can import any object geometry and freely define the path that the object should travel. Using the path of the object, the relevant lunar surface geometry is imported from a digital elevation model. The relevant parts of the lunar surface are determined based on distance to the defined path. A thermal model of these surface sections is generated, consisting of a porous layer on top and a denser layer below. The object is moved across the lunar surface, and its inclination is adapted depending on the slope of the terrain below it. Finally, a transient thermal analysis of the object and its environment is performed at several positions on its path and the results are visualized. The paper introduces details on the thermal modeling of the lunar surface, as well as its verification. Furthermore, the structure of the created software is presented. The robustness of the environment is verified with the help of sensitivity studies and possible improvements are presented.},
  language  = {en}
}
@article{SchopenNarayanBeckmannetal.2024,
  author    = {Schopen, Oliver and Narayan, Sriram and Beckmann, Marvin and Najmi, Aezid-Ul-Hassan and Esch, Thomas and Shabani, Bahman},
  title     = {An EIS approach to quantify the effects of inlet air relative humidity on the performance of proton exchange membrane fuel cells: a pathway to developing a novel fault diagnostic method},
  series = {International Journal of Hydrogen Energy},
  volume    = {58},
  journal   = {International Journal of Hydrogen Energy},
  number    = {8},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0360-3199 (print)},
  issn      = {1879-3487 (online)},
  doi       = {10.1016/j.ijhydene.2024.01.218},
  pages     = {1302 -- 1315},
  year      = {2024},
  abstract  = {In this work, the effect of low air relative humidity on the operation of a polymer electrolyte membrane fuel cell is investigated. An innovative method through performing in situ electrochemical impedance spectroscopy is utilised to quantify the effect of inlet air relative humidity at the cathode side on internal ionic resistances and output voltage of the fuel cell. In addition, algorithms are developed to analyse the electrochemical characteristics of the fuel cell. For the specific fuel cell stack used in this study, the membrane resistance drops by over 39 \% and the cathode side charge transfer resistance decreases by 23 \% after increasing the humidity from 30 \% to 85 \%, while the results of static operation also show an increase of ∼2.2 \% in the voltage output after increasing the relative humidity from 30 \% to 85 \%. In dynamic operation, visible drying effects occur at < 50 \% relative humidity, whereby the increase of the air side stoichiometry increases the drying effects. Furthermore, other parameters, such as hydrogen humidification, internal stack structure, and operating parameters like stoichiometry, pressure, and temperature affect the overall water balance. Therefore, the optimal humidification range must be determined by considering all these parameters to maximise the fuel cell performance and durability. The results of this study are used to develop a health management system to ensure sufficient humidification by continuously monitoring the fuel cell polarisation data and electrochemical impedance spectroscopy indicators.},
  language  = {en}
}
@article{SchopenShahEschetal.2024,
  author    = {Schopen, Oliver and Shah, Neel and Esch, Thomas and Shabani, Bahman},
  title     = {Critical quantitative evaluation of integrated health management methods for fuel cell applications},
  series = {International Journal of Hydrogen Energy},
  volume    = {70},
  journal   = {International Journal of Hydrogen Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0360-3199},
  doi       = {10.1016/j.ijhydene.2024.05.156},
  pages     = {370 -- 388},
  year      = {2024},
  abstract  = {Online fault diagnostics is a crucial consideration for fuel cell systems, particularly in mobile applications, to limit downtime and degradation, and to increase lifetime. Guided by a critical literature review, in this paper an overview of Health management systems classified in a scheme is presented, introducing commonly utilised methods to diagnose FCs in various applications. In this novel scheme, various Health management system methods are summarised and structured to provide an overview of existing systems including their associated tools. These systems are classified into four categories mainly focused on model-based and non-model-based systems. The individual methods are critically discussed when used individually or combined aimed at further understanding their functionality and suitability in different applications. Additionally, a tool is introduced to evaluate methods from each category based on the scheme presented. This tool applies the technique of matrix evaluation utilising several key parameters to identify the most appropriate methods for a given application. Based on this evaluation, the most suitable methods for each specific application are combined to build an integrated Health management system.},
  language  = {en}
}
@techreport{BirmansTamborninoUllrich2024,
  type      = {Working Paper},
  author    = {Birmans, Katrin and Tambornino, Philipp and Ullrich, Anna Valentine},
  title     = {Bevor Sie Coscine nutzen - Handreichung f{\"u}r Forschende an HAW},
  doi       = {10.5281/zenodo.12158546},
  pages     = {2 Seiten},
  year      = {2024},
  abstract  = {Um die Forschungsdatenmanagement-Plattform Coscine optimal f{\"u}r Forschungsprojekte nutzen zu k{\"o}nnen, ist es sinnvoll, einige Fragen im Vorhinein zu kl{\"a}ren. So k{\"o}nnen aufwendige {\"A}nderungen der Datenverwaltung im Nachhinein vermieden werden. Hierzu bietet die Handreichung hilfreiche Leitfragen und Erl{\"a}uterungen f{\"u}r Forschende und FDM-Service-Personal an HAW in NRW (DH.NRW-Hochschulen). FDM-Service-Mitarbeitende k{\"o}nnen die Handreichung in ihrer Beratung zu Coscine einsetzen und mit der Eingabemaske in der Kopfzeile des Dokuments auf ihre Hochschule anpassen.},
  language  = {de}
}
@techreport{HoffmannUllrich2024,
  type      = {Working Paper},
  author    = {Hoffmann, Sarah and Ullrich, Anna Valentine},
  title     = {30 Minuten FDM f{\"u}r HAW. Ein Informationsformat f{\"u}r Forschende an HAW in NRW},
  doi       = {10.5281/zenodo.12569282},
  pages     = {1 Seite},
  year      = {2024},
  abstract  = {Wie kann man das Thema Forschungsdatenmanagement (FDM) konkret und anwendbar f{\"u}r Forschende gestalten, die bisher noch wenig Kontakt damit hatten? Auf diese Frage gibt das Konzept „30 Minuten FDM f{\"u}r HAW. Ein Informationsformat f{\"u}r Forschende an HAW in NRW" eine Antwort. Es entstand als Projektarbeit im Zertifikatskurs Forschungsdatenmanagement 2023/24},
  language  = {de}
}
@article{ThomaGardiFisheretal.2024,
  author    = {Thoma, Andreas and Gardi, Alessandro and Fisher, Alex and Braun, Carsten},
  title     = {Improving local path planning for UAV flight in challenging environments by refining cost function weights},
  series = {CEAS Aeronautical Journal},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Wien},
  issn      = {1869-5590 (eISSN)},
  doi       = {10.1007/s13272-024-00741-x},
  pages     = {12 Seiten},
  year      = {2024},
  abstract  = {Unmanned Aerial Vehicles (UAV) constantly gain in versatility. However, more reliable path planning algorithms are required until full autonomous UAV operation is possible. This work investigates the algorithm 3DVFH* and analyses its dependency on its cost function weights in 2400 environments. The analysis shows that the 3DVFH* can find a suitable path in every environment. However, a particular type of environment requires a specific choice of cost function weights. For minimal failure, probability interdependencies between the weights of the cost function have to be considered. This dependency reduces the number of control parameters and simplifies the usage of the 3DVFH*. Weights for costs associated with vertical evasion (pitch cost) and vicinity to obstacles (obstacle cost) have the highest influence on the failure probability of the local path planner. Environments with mainly very tall buildings (like large American city centres) require a preference for horizontal avoidance manoeuvres (achieved with high pitch cost weights). In contrast, environments with medium-to-low buildings (like European city centres) benefit from vertical avoidance manoeuvres (achieved with low pitch cost weights). The cost of the vicinity to obstacles also plays an essential role and must be chosen adequately for the environment. Choosing these two weights ideal is sufficient to reduce the failure probability below 10\%.},
  language  = {en}
}
@article{PogorelovaRogachevAkimbekovetal.2024,
  author    = {Pogorelova, Natalia and Rogachev, Evgeniy and Akimbekov, Nuraly S. and Digel, Ilya},
  title     = {Effect of dehydration method on the micro- and nanomorphological properties of bacterial cellulose produced by Medusomyces gisevii on different substrates},
  series = {Journal of materials science},
  volume    = {2024},
  journal   = {Journal of materials science},
  publisher = {Springer Science + Business Media},
  address   = {Dordrecht},
  issn      = {1573-4803 (Online)},
  doi       = {10.1007/s10853-024-09596-3},
  pages     = {13 Seiten},
  year      = {2024},
  abstract  = {Many important properties of bacterial cellulose (BC), such as moisture absorption capacity, elasticity and tensile strength, largely depend on its structure. This paper presents a study on the effect of the drying method on BC films produced by Medusomyces gisevii using two different procedures: room temperature drying (RT, (24 ± 2 °C, humidity 65 ± 1\%, dried until a constant weight was reached) and freeze-drying (FD, treated at - 75 °C for 48 h). BC was synthesized using one of two different carbon sources—either glucose or sucrose. Structural differences in the obtained BC films were evaluated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and X-ray diffraction. Macroscopically, the RT samples appeared semi-transparent and smooth, whereas the FD group exhibited an opaque white color and sponge-like structure. SEM examination showed denser packing of fibrils in FD samples while RT-samples displayed smaller average fiber diameter, lower surface roughness and less porosity. AFM confirmed the SEM observations and showed that the FD material exhibited a more branched structure and a higher surface roughness. The samples cultivated in a glucose-containing nutrient medium, generally displayed a straight and ordered shape of fibrils compared to the sucrose-derived BC, characterized by a rougher and wavier structure. The BC films dried under different conditions showed distinctly different crystallinity degrees, whereas the carbon source in the culture medium was found to have a relatively small effect on the BC crystallinity.},
  language  = {en}
}
@article{TixMollKrafftetal.2024,
  author    = {Tix, Julian and Moll, Fabian and Krafft, Simone and Betsch, Matthias and Tippk{\"o}tter, Nils},
  title     = {Hydrogen production from enzymatic pretreated organic waste with thermotoga neapolitana},
  series = {Energies},
  volume    = {17},
  journal   = {Energies},
  number    = {12},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en17122938},
  pages     = {20 Seiten},
  year      = {2024},
  abstract  = {Biomass from various types of organic waste was tested for possible use in hydrogen production. The composition consisted of lignified samples, green waste, and kitchen scraps such as fruit and vegetable peels and leftover food. For this purpose, the enzymatic pretreatment of organic waste with a combination of five different hydrolytic enzymes (cellulase, amylase, glucoamylase, pectinase and xylase) was investigated to determine its ability to produce hydrogen (H2) with the hydrolyzate produced here. In course, the anaerobic rod-shaped bacterium T. neapolitana was used for H2 production. First, the enzymes were investigated using different substrates in preliminary experiments. Subsequently, hydrolyses were carried out using different types of organic waste. In the hydrolysis carried out here for 48 h, an increase in glucose concentration of 481\% was measured for waste loads containing starch, corresponding to a glucose concentration at the end of hydrolysis of 7.5 g·L-1. In the subsequent set fermentation in serum bottles, a H2 yield of 1.26 mmol H2 was obtained in the overhead space when Terrific Broth Medium with glucose and yeast extract (TBGY medium) was used. When hydrolyzed organic waste was used, even a H2 yield of 1.37 mmol could be achieved in the overhead space. In addition, a dedicated reactor system for the anaerobic fermentation of T. neapolitana to produce H2 was developed. The bioreactor developed here can ferment anaerobically with a very low loss of produced gas. Here, after 24 h, a hydrogen concentration of 83\% could be measured in the overhead space.},
  language  = {en}
}
@article{OehlenschlaegerVolkmarStiefelmaieretal.2024,
  author    = {Oehlenschl{\"a}ger, Katharina and Volkmar, Marianne and Stiefelmaier, Judith and Langsdorf, Alexander and Holtmann, Dirk and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {New insights into the influence of pre-culture on robust solvent production of C. acetobutylicum},
  series = {Applied Microbiology and Biotechnology},
  volume    = {108},
  journal   = {Applied Microbiology and Biotechnology},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1432-0614},
  doi       = {10.1007/s00253-023-12981-8},
  pages     = {10 Seiten},
  year      = {2024},
  abstract  = {Clostridia are known for their solvent production, especially the production of butanol. Concerning the projected depletion of fossil fuels, this is of great interest. The cultivation of clostridia is known to be challenging, and it is difficult to achieve reproducible results and robust processes. However, existing publications usually concentrate on the cultivation conditions of the main culture. In this paper, the influence of cryo-conservation and pre-culture on growth and solvent production in the resulting main cultivation are examined. A protocol was developed that leads to reproducible cultivations of Clostridium acetobutylicum. Detailed investigation of the cell conservation in cryo-cultures ensured reliable cell growth in the pre-culture. Moreover, a reason for the acid crash in the main culture was found, based on the cultivation conditions of the pre-culture. The critical parameter to avoid the acid crash and accomplish the shift to the solventogenesis of clostridia is the metabolic phase in which the cells of the pre-culture were at the time of inoculation of the main culture; this depends on the cultivation time of the pre-culture. Using cells from the exponential growth phase to inoculate the main culture leads to an acid crash. To achieve the solventogenic phase with butanol production, the inoculum should consist of older cells which are in the stationary growth phase. Considering these parameters, which affect the entire cultivation process, reproducible results and reliable solvent production are ensured.},
  language  = {en}
}
@article{GollandSchroeer2024,
  author    = {Golland, Alexander and Schr{\"o}er, Jan-Erik},
  title     = {No risk, no fun? Ber{\"u}cksichtigung datenschutzrechtlicher Risiken im Vergabeverfahren},
  series = {DSB Datenschutz-Berater},
  journal   = {DSB Datenschutz-Berater},
  number    = {5},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  isbn      = {0170-7256},
  issn      = {No risk, no fun? Ber{\"u}cksichtigung datenschutzrechtlicher Risiken im Vergabeverfahren},
  pages     = {114 -- 117},
  year      = {2024},
  language  = {de}
}
@article{ClausnitzerKleefeld2024,
  author    = {Clausnitzer, Julian and Kleefeld, Andreas},
  title     = {A spectral Galerkin exponential Euler time-stepping scheme for parabolic SPDEs on two-dimensional domains with a C² boundary},
  series = {Discrete and Continuous Dynamical Systems - Series B},
  volume    = {29},
  journal   = {Discrete and Continuous Dynamical Systems - Series B},
  number    = {4},
  publisher = {AIMS},
  address   = {Springfield},
  issn      = {1531-3492},
  doi       = {10.3934/dcdsb.2023148},
  pages     = {1624 -- 1651},
  year      = {2024},
  abstract  = {We consider the numerical approximation of second-order semi-linear parabolic stochastic partial differential equations interpreted in the mild sense which we solve on general two-dimensional domains with a C² boundary with homogeneous Dirichlet boundary conditions. The equations are driven by Gaussian additive noise, and several Lipschitz-like conditions are imposed on the nonlinear function. We discretize in space with a spectral Galerkin method and in time using an explicit Euler-like scheme. For irregular shapes, the necessary Dirichlet eigenvalues and eigenfunctions are obtained from a boundary integral equation method. This yields a nonlinear eigenvalue problem, which is discretized using a boundary element collocation method and is solved with the Beyn contour integral algorithm. We present an error analysis as well as numerical results on an exemplary asymmetric shape, and point out limitations of the approach.},
  language  = {en}
}
@article{TurdumamatovBeldaHeuermann2024,
  author    = {Turdumamatov, Samat and Belda, Aljoscha and Heuermann, Holger},
  title     = {Shaping a decoupled atmospheric pressure microwave plasma with antenna structures, Maxwell's equations, and boundary conditions},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {0093-3813 (Print)},
  doi       = {10.1109/TPS.2024.3383589},
  pages     = {1 -- 9},
  year      = {2024},
  abstract  = {This article addresses the need for an innovative technique in plasma shaping, utilizing antenna structures, Maxwell's laws, and boundary conditions within a shielded environment. The motivation lies in exploring a novel approach to efficiently generate high-energy density plasma with potential applications across various fields. Implemented in an E01 circular cavity resonator, the proposed method involves the use of an impedance and field matching device with a coaxial connector and a specially optimized monopole antenna. This setup feeds a low-loss cavity resonator, resulting in a high-energy density air plasma with a surface temperature exceeding 3500 o C, achieved with a minimal power input of 80 W. The argon plasma, resembling the shape of a simple monopole antenna with modeled complex dielectric values, offers a more energy-efficient alternative compared to traditional, power-intensive plasma shaping methods. Simulations using a commercial electromagnetic (EM) solver validate the design's effectiveness, while experimental validation underscores the method's feasibility and practical implementation. Analyzing various parameters in an argon atmosphere, including hot S -parameters and plasma beam images, the results demonstrate the successful application of this technique, suggesting its potential in coating, furnace technology, fusion, and spectroscopy applications.},
  language  = {en}
}
@inproceedings{KahraBreussKleefeldetal.2024,
  author    = {Kahra, Marvin and Breuß, Michael and Kleefeld, Andreas and Welk, Martin},
  title     = {An Approach to Colour Morphological Supremum Formation Using the LogSumExp Approximation},
  series = {Discrete Geometry and Mathematical Morphology},
  booktitle = {Discrete Geometry and Mathematical Morphology},
  editor    = {Brunetti, Sara and Frosini, Andrea and Rinaldi, Simone},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-57793-2},
  doi       = {10.1007/978-3-031-57793-2_25},
  pages     = {325 -- 337},
  year      = {2024},
  abstract  = {Mathematical morphology is a part of image processing that has proven to be fruitful for numerous applications. Two main operations in mathematical morphology are dilation and erosion. These are based on the construction of a supremum or infimum with respect to an order over the tonal range in a certain section of the image. The tonal ordering can easily be realised in grey-scale morphology, and some morphological methods have been proposed for colour morphology. However, all of these have certain limitations. In this paper we present a novel approach to colour morphology extending upon previous work in the field based on the Loewner order. We propose to consider an approximation of the supremum by means of a log-sum exponentiation introduced by Maslov. We apply this to the embedding of an RGB image in a field of symmetric 2x2 matrices. In this way we obtain nearly isotropic matrices representing colours and the structural advantage of transitivity. In numerical experiments we highlight some remarkable properties of the proposed approach.},
  language  = {en}
}
@incollection{Krause2024,
  author    = {Krause, Thomas},
  title     = {Schalung und Ger{\"u}ste},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_10},
  pages     = {659 -- 705},
  year      = {2024},
  abstract  = {Systemschalungen und Systemger{\"u}ste haben den Baustellenbetrieb in vielen Bereichen sehr vereinfacht. Dennoch sind Kenntnisse in diesen Feldern f{\"u}r eine erfolgreiche und effektive Bauleitung unverzichtbar. In diesem Kapitel werden Hinweise und Empfehlungen f{\"u}r die Bemessung und Einsatz von Schalungen, Trag- und Arbeitsger{\"u}sten f{\"u}r den Baustellenbetrieb gegeben.},
  language  = {de}
}
@unpublished{GriegerMehrkanoonBialonski2024,
  author    = {Grieger, Niklas and Mehrkanoon, Siamak and Bialonski, Stephan},
  title     = {Preprint: Data-efficient sleep staging with synthetic time series pretraining},
  series = {arXiv},
  journal   = {arXiv},
  pages     = {10 Seiten},
  year      = {2024},
  abstract  = {Analyzing electroencephalographic (EEG) time series can be challenging, especially with deep neural networks, due to the large variability among human subjects and often small datasets. To address these challenges, various strategies, such as self-supervised learning, have been suggested, but they typically rely on extensive empirical datasets. Inspired by recent advances in computer vision, we propose a pretraining task termed "frequency pretraining" to pretrain a neural network for sleep staging by predicting the frequency content of randomly generated synthetic time series. Our experiments demonstrate that our method surpasses fully supervised learning in scenarios with limited data and few subjects, and matches its performance in regimes with many subjects. Furthermore, our results underline the relevance of frequency information for sleep stage scoring, while also demonstrating that deep neural networks utilize information beyond frequencies to enhance sleep staging performance, which is consistent with previous research. We anticipate that our approach will be advantageous across a broad spectrum of applications where EEG data is limited or derived from a small number of subjects, including the domain of brain-computer interfaces.},
  language  = {en}
}
@incollection{Ulke2024,
  author    = {Ulke, Bernd},
  title     = {Privates Baurecht und Nachtragsmanagement},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_3},
  pages     = {149 -- 216},
  year      = {2024},
  abstract  = {Kein Bauvorhaben sollte realisiert werden, ohne dass es auf einer vertraglichen Grundlage zwischen Auftraggeber und Auftragnehmer fußt. Diese vertragliche Grundlage zu kennen ist essenziell, um dementsprechend handeln zu k{\"o}nnen. Denn nur wer seine eigenen Rechte und auch Pflichten kennt, kann sich auf diese berufen.},
  language  = {de}
}
@incollection{Ferger2024,
  author    = {Ferger, Martin},
  title     = {Arbeitsvorbereitung und Ablaufplanung},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_6},
  pages     = {299 -- 332},
  year      = {2024},
  abstract  = {Die Arbeitsvorbereitung, als ein wesentliches Aufgabengebiet des Baubetriebswesens, ist von enormer Bedeutung f{\"u}r den Erfolg eines Bauprojektes. Die Arbeitsvorbereitung l{\"a}sst sich zeitlich sowohl in der Angebotsphase (kalkulationsbegleitende Arbeitsvorbereitung), in der Vorbereitungsphase der Baustelle (von Auftragsvergabe bis Baubeginn) als auch baubegleitend einordnen.},
  language  = {de}
}
@book{ElsaesserKlebinggatKuhnetal.2024,
  author    = {Elsaesser, Evelyn and Klebinggat, Michael and Kuhn, Wilfried and Michielsens, Constant and Pauels, Willibert and Popkes, Enno E. and Schneider, Elke and Laack, Walter van and Warven, Rinus van},
  title     = {Schnittstelle Tod - Ist die Menschheit zu retten ohne Vertrauen auf ein Danach},
  editor    = {Laack, Walter van},
  publisher = {van Laack Buchverlag},
  address   = {Aachen},
  isbn      = {978-3-936624-58-8},
  pages     = {156 Seiten},
  year      = {2024},
  language  = {de}
}
@inproceedings{KramerBragardRitzetal.2024,
  author    = {Kramer, Pia and Bragard, Michael and Ritz, Thomas and Ferfer, Ute and Schiffers, Tim},
  title     = {Visualizing, Enhancing and Predicting Students' Success through ECTS Monitoring},
  series = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2165-9559},
  doi       = {10.1109/EDUCON60312.2024.10578652},
  pages     = {5 Seiten},
  year      = {2024},
  abstract  = {This paper serves as an introduction to the ECTS monitoring system and its potential applications in higher education. It also emphasizes the potential for ECTS monitoring to become a proactive system, supporting students by predicting academic success and identifying groups of potential dropouts for tailored support services. The use of the nearest neighbor analysis is suggested for improving data analysis and prediction accuracy.},
  language  = {en}
}
@article{ZhenLiangStaatetal.2024,
  author    = {Zhen, Manghao and Liang, Yunpei and Staat, Manfred and Li, Quanqui and Li, Jianbo},
  title     = {Discontinuous fracture behaviors and constitutive model of sandstone specimens containing non-parallel prefabricated fissures under uniaxial compression},
  series = {Theoretical and Applied Fracture Mechanics},
  volume    = {131},
  journal   = {Theoretical and Applied Fracture Mechanics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-8442},
  doi       = {10.1016/j.tafmec.2024.104373},
  pages     = {Artikel 104373},
  year      = {2024},
  abstract  = {The deformation and damage laws of non-homogeneous irregular structural planes in rocks are the basis for studying the stability of rock engineering. To investigate the damage characteristics of rock containing non-parallel fissures, uniaxial compression tests and numerical simulations were conducted on sandstone specimens containing three non-parallel fissures inclined at 0°, 45° and 90° in this study. The characteristics of crack initiation and crack evolution of fissures with different inclinations were analyzed. A constitutive model for the discontinuous fractures of fissured sandstone was proposed. The results show that the fracture behaviors of fissured sandstone specimens are discontinuous. The stress-strain curves are non-smooth and can be divided into nonlinear crack closure stage, linear elastic stage, plastic stage and brittle failure stage, of which the plastic stage contains discontinuous stress drops. During the uniaxial compression test, the middle or ends of 0° fissures were the first to crack compared to 45° and 90° fissures. The end with small distance between 0° and 45° fissures cracked first, and the end with large distance cracked later. After the final failure, 0° fissures in all specimens were fractured, while 45° and 90° fissures were not necessarily fractured. Numerical simulation results show that the concentration of compressive stress at the tips of 0°, 45° and 90° fissures, as well as the concentration of tensile stress on both sides, decreased with the increase of the inclination angle. A constitutive model for the discontinuous fractures of fissured sandstone specimens was derived by combining the logistic model and damage mechanic theory. This model can well describe the discontinuous drops of stress and agrees well with the whole processes of the stress-strain curves of the fissured sandstone specimens.},
  language  = {en}
}
@incollection{KrauseUlke2024,
  author    = {Krause, Thomas and Ulke, Bernd},
  title     = {Bauabrechnung und Mengenermittlung},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_7},
  pages     = {333 -- 397},
  year      = {2024},
  abstract  = {n diesem Kapitel werden die Abrechnungsvorschriften wichtiger ATV kurz, aber umfassend zusammengestellt. Einigen Abrechnungsbestimmungen f{\"u}r Einzelleistungen, die keine Nebenleistungen sind ((siehe DIN 18299 und Abschnitt 4 der jeweiligen ATV), sind mit aufgenommen worden; die ATV enthalten jedoch weitergehende Festlegungen {\"u}ber Nebenleistungen und Besondere Leistungen. Im Anschluss folgen Hinweise zu den Toleranzen im Hochbau sowie im Straßenbau.},
  language  = {de}
}
@masterthesis{Dankelmann2024,
  type      = {Bachelor Thesis},
  author    = {Dankelmann, Florian},
  title     = {Almanya : kulinarische Br{\"u}cken und Soziale Bindungen der t{\"u}rkischen Diaspora in Deutschland},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {93 Seiten},
  year      = {2024},
  abstract  = {Die fotografische Arbeit "Almanya" veranschaulicht Teilaspekte der t{\"u}rkischen Kultur anhand von Repr{\"a}sentantinnen und Repr{\"a}sentanten der t{\"u}rkeist{\"a}mmigen Community in Deutschland. Mit einem Fokus auf Kulinarik und Formen des Zusammenlebens werden Menschen mit t{\"u}rkischen Wurzeln portr{\"a}tiert, sodass am Ende ein Einblick in deren Lebens- und Gedankenwelt erm{\"o}glicht wird und kulinarische Br{\"u}cken zwischen Deutschen und der t{\"u}rkischen Kultur gebaut werden. Die enthaltene Botschaft, welche das Projekt den Rezipient:innen {\"u}berbringt, ist in einem multikulturellen Land wie Deutschland von großer Wichtigkeit f{\"u}r gegenseitiges Verst{\"a}ndnis und bildet den Boden f{\"u}r ein harmonisches Miteinander.},
  language  = {de}
}
@masterthesis{Berwanger2024,
  type      = {Bachelor Thesis},
  author    = {Berwanger, Natalie},
  title     = {Social Media Kampagne - Produktwerbung : Videobegleitende Social Media Kampagne zur Vermarktung eines Produkts},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {37 Seiten},
  year      = {2024},
  abstract  = {Diese zweiw{\"o}chige Social Media Kampagne pr{\"a}sentiert ein Auto durch eine Fusion von realer und digitaler Kunst, unterst{\"u}tzt von audiovisuellen Elementen. Ziel ist es, ein neues Erlebnis zu schaffen, das nachhaltige Mobilit{\"a}t in st{\"a}dtischer Kultur reflektiert und fortschrittliche Technologien nutzt.},
  language  = {de}
}
@masterthesis{Fleischer2024,
  type      = {Bachelor Thesis},
  author    = {Fleischer, Rebekka},
  title     = {Bringing brand experience to marketplaces : ein Online-Marktplatz, der Konsument und Marke verbindet},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {101 Seiten},
  year      = {2024},
  abstract  = {«Keno» zeigt ein Konzept f{\"u}r einen Online-Marktplatz im Fashion-Segment, mit Fokus auf individueller Beratung, digitaler Anprobe und visueller sowie informativer Pr{\"a}sentation der Marken. Marktpl{\"a}tze werden aufgrund von großer Auswahl und Vertrauensw{\"u}rdigkeit von Konsument:innen bevorzugt aufgesucht. Durch die immersive Darstellung an einem maßgetreuen Avatar und die Einbindung der Marke in das Einkaufserlebnis soll hier die Zahl der Retouren verringert und die Kund:innenzufriedenheit gesteigert werden. Mittels nutzerorientierter Strategien und der Gestaltung eines Designsystems bekam «Keno» seinen Look. Dabei fanden modernste Techniken wie k{\"u}nstliche Intelligenzen und Design Token Systeme Verwendung. Das Projekt zeigt letztendlich M{\"o}glichkeiten auf, wie ein Marktplatz durch Brand Experience, Onlineshopping-Wege verk{\"u}rzen und zu mehr Nachhaltigkeit im E-Commerce beitragen kann.},
  language  = {de}
}
@masterthesis{Albrecht2024,
  type      = {Bachelor Thesis},
  author    = {Albrecht, Dustin},
  title     = {„ARRK Journeys" Filmformat-Konzept},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {26 Seiten},
  year      = {2024},
  abstract  = {Das Projekt "ARRK Journeys" entwickelt ein neues Dokumentarfilm-Format, das darauf abzielt, potenzielle Mitarbeiter f{\"u}r die ARRK Engineering GmbH zu gewinnen Das Ziel des Projekts ist es, die Vielfalt an Karrierem{\"o}glichkeiten bei der ARRK Engineering GmbH aufzuzeigen und die Attraktivit{\"a}t des Unternehmens als Arbeitgeber zu betonen. Durch individuelle Mitarbeitergeschichten werden die Fragen beantwortet, warum eine berufliche Laufbahn bei ARRK erstrebenswert ist, ob jeder die M{\"o}glichkeit hat, bei ARRK zu arbeiten, und welche Entwicklungsm{\"o}glichkeiten das Unternehmen bietet. "ARRK Journeys" betont das Wohlbefinden der Mitarbeiter und ihre pers{\"o}nliche Bindung zum Unternehmen, um eine positive Arbeitgebermarke zu schaffen. "ARRK Journeys" pr{\"a}sentiert die ARRK Engineering GmbH als attraktiven Arbeitgeber und inspiriert potenzielle Mitarbeiter dazu, ihren eigenen Weg zu finden.},
  language  = {de}
}
@incollection{RickerUlke2024,
  author    = {Ricker, Marcus and Ulke, Bernd},
  title     = {Baustoffe},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_2},
  pages     = {61 -- 148},
  year      = {2024},
  abstract  = {In diesem Kapitel werden die Eigenschaften der Baustoffe Bitumen, Beton und Mauerwerk insbesondere unter dem Aspekt der Anwendung im Baustellenbetrieb dargestellt.},
  language  = {de}
}
@article{SchoppRohrbachLangeretal.2024,
  author    = {Schopp, Christoph and Rohrbach, Felix and Langer, Luc and Heuermann, Holger},
  title     = {Detection of welding wire length by active S11 measurement},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {0093-3813 (Print)},
  doi       = {10.1109/TPS.2024.3356659},
  pages     = {1 -- 6},
  year      = {2024},
  abstract  = {A novel method to determine the extruded length of a metallic wire for a directed energy deposition (DED) process using a microwave (MW) plasma jet with a straight-through wire feed is presented. The method is based on the relative comparison of the measured frequency response obtained by the large-signal scattering parameter (Hot-S) technique. In the practical working range, repeatability of less than 6\% for a nonactive plasma and 9\% for the active plasma state is found. Measurements are conducted with a focus on a simple solution to decrease the processing time and reduce the integration time of the process into the existing hardware. It is shown that monitoring a single frequency for magnitude and phase changes is sufficient to achieve good accuracy. A combination of different measurement values to determine the length is possible. The applicability to different diameter of the same material is shown as well as a contact detection of the wire and metallic substrate.},
  language  = {en}
}
@masterthesis{Breuer2024,
  type      = {Bachelor Thesis},
  author    = {Breuer, Annika},
  title     = {Climate Engineering : Entwicklung einer digitalen Plattform f{\"u}r Geoengineering-Methoden und Klimawandel-Daten},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {71 Seiten},
  year      = {2024},
  abstract  = {Dieses Projekt hat zum Ziel, umfassend {\"u}ber Climate Engineering-Maßnahmen zu informieren und dabei insbesondere ihre Funktionsweise, Kosten und Risiken darzustellen. Die entstandene Plattform "Die Erde abk{\"u}hlen!" bietet einen Einblick in die L{\"o}sungsans{\"a}tze des Climate Engineerings durch die Verwendung von Storytelling. Sie erm{\"o}glicht Nutzer:innen einen {\"U}berblick {\"u}ber den aktuellen Stand der Klimaerw{\"a}rmung sowie den Vergleich von Climate Engineering-Maßnahmen. Ein entwickeltes Bewertungssystem auf Grundlage der "Royal Society" sowie interaktive Infografiken geben Nutzer:innen einen umfassenden Einblick. Das Hauptziel des Projekts ist die digitale Transformation der Climate Engineering-L{\"o}sungsans{\"a}tze. Dabei geht es nicht nur darum, {\"u}ber die Folgen der Klimaerw{\"a}rmung zu informieren, sondern auch konkrete L{\"o}sungen aufzuzeigen. Durch die Entwicklung eines innovativen Storytellings wird die Thematik nicht nur dramaturgisch pr{\"a}sentiert, sondern erm{\"o}glicht es den Nutzer:innen auch, ihre eigene Wissensvertiefung zu steuern.},
  language  = {de}
}