@inproceedings{SchollSuderSchiffer2018,
  author    = {Scholl, Ingrid and Suder, Sebastian and Schiffer, Stefan},
  title     = {Direct Volume Rendering in Virtual Reality},
  series = {Bildverarbeitung f{\"u}r die Medizin 2018},
  booktitle = {Bildverarbeitung f{\"u}r die Medizin 2018},
  publisher = {Springer Vieweg},
  address   = {Berlin},
  isbn      = {978-3-662-56537-7},
  doi       = {10.1007/978-3-662-56537-7_79},
  pages     = {297 -- 302},
  year      = {2018},
  language  = {en}
}
@article{HirschKleebergSchmitz2018,
  author    = {Hirsch, Marko and Kleeberg, Jochen and Schmitz, Philipp},
  title     = {Dynamische Asset-Allocation- Strategien im Niedrigzinsumfeld},
  series = {Absolut|report : neue Perspektiven f{\"u}r institutionelle Investoren},
  journal   = {Absolut|report : neue Perspektiven f{\"u}r institutionelle Investoren},
  number    = {6},
  publisher = {Absolut Research},
  address   = {Hamburg},
  pages     = {52},
  year      = {2018},
  language  = {de}
}
@article{Wollert2018,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet - Basis f{\"u}r Industrie 4.0},
  series = {Design \& Elektronik},
  journal   = {Design \& Elektronik},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  isbn      = {0933-8667},
  year      = {2018},
  language  = {de}
}
@article{WerkhausenAlbrachtCroninetal.2018,
  author    = {Werkhausen, Amelie and Albracht, Kirsten and Cronin, Neil J and Paulsen, G{\o}ran and Bojsen-M{\o}ller, Jens and Seynnes, Olivier R},
  title     = {Effect of training-induced changes in achilles tendon stiffness on muscle-tendon behavior during landing},
  series = {Frontiers in physiology},
  journal   = {Frontiers in physiology},
  number    = {9},
  publisher = {Frontiers Research Foundation},
  address   = {Lausanne},
  issn      = {1664-042X},
  doi       = {10.3389/fphys.2018.00794},
  pages     = {11 Seiten},
  year      = {2018},
  abstract  = {During rapid deceleration of the body, tendons buffer part of the elongation of the muscle-tendon unit (MTU), enabling safe energy dissipation via eccentric muscle contraction. Yet, the influence of changes in tendon stiffness within the physiological range upon these lengthening contractions is unknown. This study aimed to examine the effect of training-induced stiffening of the Achilles tendon on triceps surae muscle-tendon behavior during a landing task. Twenty-one male subjects were assigned to either a 10-week resistance-training program consisting of single-leg isometric plantarflexion (n = 11) or to a non-training control group (n = 10). Before and after the training period, plantarflexion force, peak Achilles tendon strain and stiffness were measured during isometric contractions, using a combination of dynamometry, ultrasound and kinematics data. Additionally, testing included a step-landing task, during which joint mechanics and lengths of gastrocnemius and soleus fascicles, Achilles tendon, and MTU were determined using synchronized ultrasound, kinematics and kinetics data collection. After training, plantarflexion strength and Achilles tendon stiffness increased (15 and 18\%, respectively), and tendon strain during landing remained similar. Likewise, lengthening and negative work produced by the gastrocnemius MTU did not change detectably. However, in the training group, gastrocnemius fascicle length was offset (8\%) to a longer length at touch down and, surprisingly, fascicle lengthening and velocity were reduced by 27 and 21\%, respectively. These changes were not observed for soleus fascicles when accounting for variation in task execution between tests. These results indicate that a training-induced increase in tendon stiffness does not noticeably affect the buffering action of the tendon when the MTU is rapidly stretched. Reductions in gastrocnemius fascicle lengthening and lengthening velocity during landing occurred independently from tendon strain. Future studies are required to provide insight into the mechanisms underpinning these observations and their influence on energy dissipation.},
  language  = {en}
}
@article{BaringhausGaigall2018,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {Efficiency comparison of the Wilcoxon tests in paired and independent survey samples},
  series = {Metrika},
  volume    = {2018},
  journal   = {Metrika},
  number    = {81},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1435-926X},
  doi       = {10.1007/s00184-018-0661-4},
  pages     = {891 -- 930},
  year      = {2018},
  abstract  = {The efficiency concepts of Bahadur and Pitman are used to compare the Wilcoxon tests in paired and independent survey samples. A comparison through the length of corresponding confidence intervals is also done. Simple conditions characterizing the dominance of a procedure are derived. Statistical tests for checking these conditions are suggested and discussed.},
  language  = {de}
}
@inproceedings{GrundmannBauerBieleetal.2018,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Biele, Jens and Boden, Ralf and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian and Herč{\´i}k, David and Herique, Alain and Ho, Tra-Mi and Jahnke, Rico and Koch, Aaron and Kofman, Wlodek and Koncz, Alexander and Krause, Christian and Lange, Caroline and Lichtenheldt, Roy and Maiwald, Volker and Mikschl, Tobias and Mikulz, Eugen and Montenegro, Sergio and Pelivan, Ivanka and Peloni, Alessandro and Plettemeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Tardivel, Simon and Toth, Norbert and Wejmo, Elisabet and Wolff, Friederike and Ziach, Christian},
  title     = {Efficient massively parallel prospection for ISRU by multiple near-earth asteroid rendezvous using near-term solar sails and'now-term'small spacecraft solutions},
  series = {2nd Asteroid Science Intersections with In-Space Mine Engineering - ASIME 2018},
  booktitle = {2nd Asteroid Science Intersections with In-Space Mine Engineering - ASIME 2018},
  pages     = {1 -- 33},
  year      = {2018},
  abstract  = {Physical interaction with small solar system bodies (SSSB) is key for in-situ resource utilization (ISRU). The design of mining missions requires good understanding of SSSB properties, including composition, surface and interior structure, and thermal environment. But as the saying goes "If you've seen one asteroid, you've seen one Asteroid": Although some patterns may begin to appear, a stable and reliable scheme of SSSB classification still has to be evolved. Identified commonalities would enable generic ISRU technology and spacecraft design approaches with a high degree of re-use. Strategic approaches require much broader in-depth characterization of the SSSB populations of interest to the ISRU community. The DLR-ESTEC GOSSAMER Roadmap Science Working Groups identified target-flexible Multiple Near-Earth asteroid (NEA) Rendezvous (MNR) as one of the missions only feasible with solar sail propulsion, showed the ability to access any inclination and a wide range of heliocentric distances as well as continuous operation close to Earth's orbit where low delta-v objects reside.},
  language  = {en}
}
@incollection{GollandBaumHammingeretal.2018,
  author    = {Golland, Alexander and Baum, Michael and Hamminger, Alexander and Olbertz, Klaus},
  title     = {Ein {\"U}berblick: Umsetzung der Datenschutz-Grundverordnung},
  series = {Das neue Datenschutzrecht in der Praxis des Steuerberaters Beitragssammlung},
  booktitle = {Das neue Datenschutzrecht in der Praxis des Steuerberaters Beitragssammlung},
  publisher = {NWB Verlag},
  address   = {Herne},
  isbn      = {978-3-482-67271-2},
  pages     = {8 -- 14},
  year      = {2018},
  abstract  = {Datenschutz und der 25.5.2018, wie ein Damoklesschwert scheinen beide Begriffe zurzeit im Raum zu stehe. Jeder weiß oder sollte zumindest um das Inkrafttreten der europ{\"a}ischen DSGVO am 25.5.2018 wissen. Viel wurde {\"u}ber wesentliche Neuerungen im Datenschutzrecht berichtet. Nicht zuletzt {\"u}ber gesteigerte organisatorische Anforderungen, Dokumentationspflichten und drohende Bußgelder. Doch was bedeuten diese Neuerungen ganz konkret f{\"u}r die Praxis des Steuerberaters? Anders als man vermuten k{\"o}nnte, werden die datenschutzrechtlichen Neuerungen nicht nur im Bereich der Kanzleiorganisation relevant. Auch im Steuerverwaltungsverfahren sieht sich der Steuerberater datenschutzrechtlichen Fragestellungen gegen{\"u}ber, bspw. dann, wenn die Finanzbeh{\"o}rden bei der Verarbeitung der personenbezogenen Daten des Mandanten gegen die DSGVO verstoßen. Gleiches gilt in Bereichen des Besch{\"a}ftigtendatenschutzes. Sowohl der Kanzleiinhaber selbst, als auch seine Arbeitgeber-Mandanten haben die Vorschriften des Besch{\"a}ftigtendatenschutzes einzuhalten. Der Steuerberater ben{\"o}tigt datenschutzrechtliches Know How, welches unmittelbar seine t{\"a}gliche Praxis betrifft. Andernfalls besteht das Risiko, dass dieser mit mehr Fragen, als Antworten zur{\"u}ck bleibt.},
  language  = {de}
}
@incollection{Fabo2018,
  author    = {Fabo, Sabine},
  title     = {Eine dekonstruktive Erinnerungsarbeit},
  series = {Doris Frohnapfel, bewaffnete G{\"o}tter = Doris Frohnapfel, armed gods},
  booktitle = {Doris Frohnapfel, bewaffnete G{\"o}tter = Doris Frohnapfel, armed gods},
  publisher = {RpB Richter-Br{\"u}ckner},
  address   = {K{\"o}ln},
  isbn      = {978-3-9817241-2-7},
  pages     = {31 -- 35},
  year      = {2018},
  language  = {de}
}
@article{BensbergAuthCzarnecki2018,
  author    = {Bensberg, Frank and Auth, Gunnar and Czarnecki, Christian},
  title     = {Einsatz von Text Analytics zur Unterst{\"u}tzung literaturintensiver Forschungsprozesse: Konzeption, Realisierung und Lessons Learned},
  series = {Anwendungen und Konzepte der Wirtschaftsinformatik},
  volume    = {2018},
  journal   = {Anwendungen und Konzepte der Wirtschaftsinformatik},
  number    = {8},
  publisher = {AKWI},
  address   = {Luzern},
  issn      = {2296-4592},
  doi       = {10.26034/lu.akwi.2018.3221},
  pages     = {1 -- 6},
  year      = {2018},
  abstract  = {Das anhaltende Wachstum wissenschaftlicher Ver{\"o}ffentlichungen wirft die Fragestellung auf, wie Literaturana-lysen im Rahmen von Forschungsprozessen digitalisiert und somit produktiver realisiert werden k{\"o}nnen. Insbesondere in informationstechnischen Fachgebieten ist die Forschungspraxis durch ein rasant wachsendes Publikationsaufkommen gekennzeichnet. Infolgedessen bietet sich der Einsatz von Methoden der Textanalyse (Text Analytics) an, die Textdaten automatisch vorbereiten und verarbeiten k{\"o}nnen. Erkenntnisse entstehen dabei aus Analysen von Wortarten und Subgruppen, Korrelations- sowie Zeitreihenanalysen. Dieser Beitrag stellt die Konzeption und Realisierung eines Prototypen vor, mit dem Anwender bibliographische Daten aus der etablierten Literaturdatenbank EBSCO Discovery Service mithilfe textanalytischer Methoden erschließen k{\"o}nnen. Der Prototyp basiert auf dem Analysesystem IBM Watson Explorer, das Hochschulen lizenzkostenfrei zur Verf{\"u}gung steht. Potenzielle Adressaten des Prototypen sind Forschungseinrichtungen, Beratungsunternehmen sowie Entscheidungstr{\"a}ger in Politik und Unternehmenspraxis.},
  language  = {de}
}
@incollection{Fabo2018,
  author    = {Fabo, Sabine},
  title     = {Einspr{\"u}che gegen den informierten Himmel ; Wegsehen; Distanzschaffen, Spielen},
  series = {Orbitale Irritationen / Herausgeber: REMOTEWORDS: Achim Mohn{\´e} \& Uta Kopp},
  booktitle = {Orbitale Irritationen / Herausgeber: REMOTEWORDS: Achim Mohn{\´e} \& Uta Kopp},
  publisher = {Herbert von Halem Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-86962-302-3},
  pages     = {20 -- 45},
  year      = {2018},
  language  = {de}
}
@article{WeldenSchejaSchoeningetal.2018,
  author    = {Welden, Rene and Scheja, Sabrina and Sch{\"o}ning, Michael Josef and Wagner, Patrick and Wagner, Torsten},
  title     = {Electrochemical Evaluation of Light-Addressable Electrodes Based on TiO2 for the Integration in Lab-on-Chip Systems},
  series = {physica status solidi a : applications and materials sciences},
  volume    = {215},
  journal   = {physica status solidi a : applications and materials sciences},
  number    = {15},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201800150},
  pages     = {Article number 1800150},
  year      = {2018},
  abstract  = {In lab-on-chip systems, electrodes are important for the manipulation (e.g., cell stimulation, electrolysis) within such systems. An alternative to commonly used electrode structures can be a light-addressable electrode. Here, due to the photoelectric effect, the conducting area can be adjusted by modification of the illumination area which enables a flexible control of the electrode. In this work, titanium dioxide based light-addressable electrodes are fabricated by a sol-gel technique and a spin-coating process, to deposit a thin film on a fluorine-doped tin oxide glass. To characterize the fabricated electrodes, the thickness, and morphological structure are measured by a profilometer and a scanning electron microscope. For the electrochemical behavior, the dark current and the photocurrent are determined for various film thicknesses. For the spatial resolution behavior, the dependency of the photocurrent while changing the area of the illuminated area is studied. Furthermore, the addressing of single fluid compartments in a three-chamber system, which is added to the electrode, is demonstrated.},
  language  = {en}
}
@inproceedings{JungFrotscherStaat2018,
  author    = {Jung, Alexander and Frotscher, Ralf and Staat, Manfred},
  title     = {Electromechanical model of hiPSC-derived ventricular cardiomyocytes cocultured with fibroblasts},
  series = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  booktitle = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  pages     = {11 Seiten},
  year      = {2018},
  abstract  = {The CellDrum provides an experimental setup to study the mechanical effects of fibroblasts co-cultured with hiPSC-derived ventricular cardiomyocytes. Multi-scale computational models based on the Finite Element Method are developed. Coupled electrical cardiomyocyte-fibroblast models (cell level) are embedded into reaction-diffusion equations (tissue level) which compute the propagation of the action potential in the cardiac tissue. Electromechanical coupling is realised by an excitation-contraction model (cell level) and the active stress arising during contraction is added to the passive stress in the force balance, which determines the tissue displacement (tissue level). Tissue parameters in the model can be identified experimentally to the specific sample.},
  language  = {en}
}
@article{MuellerBeckersMussmannetal.2018,
  author    = {M{\"u}ller, Janina and Beckers, Mario and Mußmann, Nina and Bongaerts, Johannes and B{\"u}chs, Jochen},
  title     = {Elucidation of auxotrophic deficiencies of Bacillus pumilus DSM 18097 to develop a defined minimal medium},
  series = {Microbial Cell Factories},
  volume    = {17},
  journal   = {Microbial Cell Factories},
  number    = {1},
  publisher = {BioMed Central},
  issn      = {1475-2859},
  doi       = {10.1186/s12934-018-0956-1},
  pages     = {Article No. 106},
  year      = {2018},
  abstract  = {Background Culture media containing complex compounds like yeast extract or peptone show numerous disadvantages. The chemical composition of the complex compounds is prone to significant variations from batch to batch and quality control is difficult. Therefore, the use of chemically defined media receives more and more attention in commercial fermentations. This concept results in better reproducibility, it simplifies downstream processing of secreted products and enable rapid scale-up. Culturing bacteria with unknown auxotrophies in chemically defined media is challenging and often not possible without an extensive trial-and-error approach. In this study, a respiration activity monitoring system for shake flasks and its recent version for microtiter plates were used to clarify unknown auxotrophic deficiencies in the model organism Bacillus pumilus DSM 18097. Results Bacillus pumilus DSM 18097 was unable to grow in a mineral medium without the addition of complex compounds. Therefore, a rich chemically defined minimal medium was tested containing basically all vitamins, amino acids and nucleobases, which are essential ingredients of complex components. The strain was successfully cultivated in this medium. By monitoring of the respiration activity, nutrients were supplemented to and omitted from the rich chemically defined medium in a rational way, thus enabling a systematic and fast determination of the auxotrophic deficiencies. Experiments have shown that the investigated strain requires amino acids, especially cysteine or histidine and the vitamin biotin for growth. Conclusions The introduced method allows an efficient and rapid identification of unknown auxotrophic deficiencies and can be used to develop a simple chemically defined tailor-made medium. B. pumilus DSM 18097 was chosen as a model organism to demonstrate the method. However, the method is generally suitable for a wide range of microorganisms. By combining a systematic combinatorial approach based on monitoring the respiration activity with cultivation in microtiter plates, high throughput experiments with high information content can be conducted. This approach facilitates media development, strain characterization and cultivation of fastidious microorganisms in chemically defined minimal media while simultaneously reducing the experimental effort.},
  language  = {en}
}
@book{Huening2018,
  author    = {H{\"u}ning, Felix},
  title     = {Embedded Design For IoT With Renesas Synergy},
  publisher = {Renesas Electronics},
  address   = {D{\"u}sseldorf},
  pages     = {143 S.},
  year      = {2018},
  language  = {en}
}
@article{ValeroBungCrookston2018,
  author    = {Valero, Daniel and Bung, Daniel B. and Crookston, B.M.},
  title     = {Energy dissipation of a Type III basin under design and adverse conditions for stepped and smooth spillways},
  series = {Journal of Hydraulic Engineering},
  volume    = {144},
  journal   = {Journal of Hydraulic Engineering},
  number    = {7},
  publisher = {ASCE},
  address   = {Reston, Va.},
  issn      = {0733-9429},
  doi       = {10.1061/(ASCE)HY.1943-7900.0001482},
  year      = {2018},
  abstract  = {New information regarding the influence of a stepped chute on the hydraulic performance of the United States Bureau of Reclamation (Reclamation) Type III hydraulic jump stilling basin is presented for design (steady) and adverse (decreasing tailwater) conditions. Using published experimental data and computational fluid dynamics (CFD) models, this paper presents a detailed comparison between smooth-chute and stepped-chute configurations for chute slopes of 0.8H:1V and 4H:1V and Froude numbers (F) ranging from 3.1 to 9.5 for a Type III basin designed for F = 8. For both stepped and smooth chutes, the relative role of each basin element was quantified, up to the most hydraulic extreme case of jump sweep-out. It was found that, relative to a smooth chute, the turbulence generated by a stepped chute causes a higher maximum velocity decay within the stilling basin, which represents an enhancement of the Type III basin's performance but also a change in the relative role of the basin elements. Results provide insight into the ability of the CFD models [unsteady Reynolds-averaged Navier-Stokes (RANS) equations with renormalization group (RNG) k-ϵ turbulence model and volume-of-fluid (VOF) for free surface tracking] to predict the transient basin flow structure and velocity profiles. Type III basins can perform adequately with a stepped chute despite the effects steps have on the relative role of each basin element. It is concluded that the classic Type III basin design, based upon methodology by reclamation specific to smooth chutes, can be hydraulically improved for the case of stepped chutes for design and adverse flow conditions using the information presented herein.},
  language  = {en}
}
@incollection{LeiseAltherrPelz2018,
  author    = {Leise, Philipp and Altherr, Lena and Pelz, Peter F.},
  title     = {Energy-Efficient design of a water supply system for skyscrapers by mixed-integer nonlinear programming},
  series = {Operations Research Proceedings 2017},
  booktitle = {Operations Research Proceedings 2017},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-89919-0},
  doi       = {10.1007/978-3-319-89920-6_63},
  year      = {2018},
  abstract  = {The energy-efficiency of technical systems can be improved by a systematic design approach. Technical Operations Research (TOR) employs methods known from Operations Research to find a global optimal layout and operation strategy of technical systems. We show the practical usage of this approach by the systematic design of a decentralized water supply system for skyscrapers. All possible network options and operation strategies are modeled by a Mixed-Integer Nonlinear Program. We present the optimal system found by our approach and highlight the energy savings compared to a conventional system design.},
  language  = {en}
}
@article{TekinAshikagaHorikawaetal.2018,
  author    = {Tekin, Nurettin and Ashikaga, Mitsugu and Horikawa, Atsushi and Funke, Harald},
  title     = {Enhancement of fuel flexibility of industrial gas turbines by development of innovative hydrogen combustion systems},
  series = {Gas for energy},
  journal   = {Gas for energy},
  number    = {2},
  publisher = {Vulkan-Verlag},
  address   = {Essen},
  pages     = {4},
  year      = {2018},
  abstract  = {For fuel flexibility enhancement hydrogen represents a possible alternative gas turbine fuel within future low emission power generation, in case of hydrogen production by the use of renewable energy sources such as wind energy or biomass. Kawasaki Heavy Industries, Ltd. (KHI) has research and development projects for future hydrogen society; production of hydrogen gas, refinement and liquefaction for transportation and storage, and utilization with gas turbine / gas engine for the generation of electricity. In the development of hydrogen gas turbines, a key technology is the stable and low NOx hydrogen combustion, especially Dry Low Emission (DLE) or Dry Low NOx (DLN) hydrogen combustion. Due to the large difference in the physical properties of hydrogen compared to other fuels such as natural gas, well established gas turbine combustion systems cannot be directly applied for DLE hydrogen combustion. Thus, the development of DLE hydrogen combustion technologies is an essential and challenging task for the future of hydrogen fueled gas turbines. The DLE Micro-Mix combustion principle for hydrogen fuel has been in development for many years to significantly reduce NOx emissions. This combustion principle is based on cross-flow mixing of air and gaseous hydrogen which reacts in multiple miniaturized "diffusion-type" flames. The major advantages of this combustion principle are the inherent safety against flashback and the low NOx-emissions due to a very short residence time of the reactants in the flame region of the micro-flames.},
  language  = {en}
}
@inproceedings{HofmannMatareNeumannetal.2018,
  author    = {Hofmann, Till and Matar{\´e}, Victor and Neumann, Tobias and Sch{\"o}nitz, Sebastian and Henke, Christoph and Limpert, Nicolas and Niemueller, Tim and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Enhancing Software and Hardware Reliability for a Successful Participation in the RoboCup Logistics League 2017},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-00308-1},
  doi       = {10.1007/978-3-030-00308-1_40},
  pages     = {486 -- 497},
  year      = {2018},
  language  = {en}
}
@inproceedings{BrockmannSultanowCzarnecki2018,
  author    = {Brockmann, Carsten and Sultanow, Eldar and Czarnecki, Christian},
  title     = {Enterprise architectures between agility and traditional methodologies},
  series = {GI Edition Proceedings Band 285 Workshops der INFORMATIK 2018},
  booktitle = {GI Edition Proceedings Band 285 Workshops der INFORMATIK 2018},
  editor    = {Czarnecki, Christian and Brockmann, Carsten and Sultanow, Eldar and Koschmider, Agnes and Selzer, Annika and Gesellschaft f{\"u}r Informatik e. V.,},
  publisher = {K{\"o}llen},
  address   = {Bonn},
  isbn      = {9783885796794},
  issn      = {1617-5468},
  pages     = {1 Seite},
  year      = {2018},
  abstract  = {For this year's workshop on Enterpirse Architecture in Research and Practice we have received eight submissions from which four have passed the rigorous peer-review. The acceptance quote of 50\% assures that only advancements in the field are included in our workshop.},
  language  = {en}
}
@incollection{RoethDeutskensKreiskoetheretal.2018,
  author    = {R{\"o}th, Thilo and Deutskens, Christoph and Kreisk{\"o}ther, Kai and Heimes, Heiner Hans and Schittny, Bastian and Ivanescu, Sebastian and Kleine B{\"u}ning, Max and Reinders, Christian and Wessels, Saskia and Haunreiter, Andreas and Reisgen, Uwe and Thiele, Regina and Hameyer, Kay and Doncker, Rik W. de and Sauer, Uwe and Hoek, Hauke van and H{\"u}bner, Mareike and Hennen, Martin and Stolze, Thilo and Vetter, Andreas and Hagedorn, J{\"u}rgen and M{\"u}ller, Dirk and Rewitz, Kai and Wesseling, Mark and Flieger, Bj{\"o}rn},
  title     = {Entwicklung von elektrofahrzeugspezifischen Systemen},
  series = {Elektromobilit{\"a}t},
  booktitle = {Elektromobilit{\"a}t},
  publisher = {Springer Vieweg},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-53137-2},
  doi       = {10.1007/978-3-662-53137-2_6},
  pages     = {279 -- 386},
  year      = {2018},
  abstract  = {Die Batterie ist eine der absolut zentralen Komponenten des Elektrofahrzeugs. Die serielle Entwicklung und Produktion dieser Batterien und die Verbesserung der Leistungen wird entscheidend f{\"u}r den Erfolg der Elektromobilit{\"a}t sein. Die Batterie ist jedoch nicht das einzige elektrofahrzeugspezifische System, das neu entwickelt, umkonzipiert oder verbessert werden muss. So sind ebenso die Entwicklung der neuen Fahrzeugstruktur sowie des elektrifizierten Antriebsstranges Teil dieses Kapitels. Weiterhin wird ein Blick auf das bedeutende Thema des Thermomanagements geworfen.},
  language  = {de}
}
@incollection{SchoeningPoghossian2018,
  author    = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Enzyme und Biosensorik},
  series = {Einf{\"u}hrung in die Enzymtechnologie},
  booktitle = {Einf{\"u}hrung in die Enzymtechnologie},
  publisher = {Springer Spektrum},
  address   = {Berlin},
  isbn      = {978-3-662-57619-9},
  doi       = {10.1007/978-3-662-57619-9_18},
  pages     = {323 -- 347},
  year      = {2018},
  abstract  = {Enzymbasierte Biosensoren finden seit mehr als f{\"u}nf Jahrzehnten einen prosperierenden Wachstumsmarkt und werden zunehmend auch in biotechnologischen Prozessen eingesetzt. In diesem Kapitel werden, ausgehend vom Sensorbegriff und typischen Kenngr{\"o}ßen f{\"u}r Biosensoren (Abschn. 18.1), elektrochemische Enzym-Biosensoren vorgestellt und deren typischen Einsatzgebiete diskutiert (Abschn. 18.2). Ein Blick {\"u}ber den „Tellerrand" hinaus zeigt alternative Transduktorprinzipien (Abschn. 18.3) und f{\"u}hrt abschließend in aktuelle Forschungstrends ein (Abschn. 18.4).},
  language  = {de}
}
@article{ButenwegMarinkovic2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko},
  title     = {Erdbebensicherer Anschluss von Ausfachungsmauerwerk in Stahlbetonrahmentragwerken mit Entkopplungselementen},
  series = {Bauingenieur},
  volume    = {93},
  journal   = {Bauingenieur},
  number    = {9},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {333 -- 341},
  year      = {2018},
  abstract  = {Stahlbetonrahmentragwerke mit Mauerwerksausfachungen weisen nach Erdbebenereignissen h{\"a}ufig schwere Sch{\"a}den auf, da die Ausfachungen ohne weitere konstruktive Maßnahmen mit vollem Kontakt zum Stahlbetonrahmen eingemauert werden. Durch die unplanm{\"a}ßige Beteiligung am horizontalen Lastabtrag erfahren die Ausfachungen Belastungen in Wandebene und beeinflussen das globale Schwingungsverhalten der Rahmentragwerke. In Kombination mit den gleichzeitig auftretenden seismischen Tr{\"a}gheitskr{\"a}ften senkrecht zur Wand f{\"u}hrt dies in vielen F{\"a}llen zu einem Versagen der mit niedrigen Festigkeiten ausgef{\"u}hrten Ausfachungen. Dies war der Anlass in dem europ{\"a}ischen Forschungsprojekt INSYSME ein Entkopplungssystem zu entwickeln, mit dem Rahmen und Ausfachung durch ein spezielles Profil aus Elastomeren entkoppelt werden. Das Profil erm{\"o}glicht Relativverschiebungen zwischen Rahmen und Ausfachung und stellt gleichzeitig die Aufnahme von Belastungen senkrecht zur Wand sicher. Der Beitrag erl{\"a}utert zun{\"a}chst den Aufbau des Systems und gibt einen {\"U}berblick {\"u}ber die in Kleinbauteilversuchen ermittelten Tragf{\"a}higkeiten. Zudem werden experimentelle Untersuchungen an mit hochw{\"a}rmed{\"a}mmenden Mauerziegeln ausgefachten Stahlbetonrahmen mit und ohne Entkopplungssystem f{\"u}r getrennte und kombinierte Belastungen in und senkrecht zur Wandebene vorgestellt. Auf Grundlage einer Versuchsauswertung und eines Ergebnisvergleichs werden Wirkungsweise und Effektivit{\"a}t des entwickelten Entkopplungssystems demonstriert.},
  language  = {de}
}
@incollection{PielenRoethFlatten2018,
  author    = {Pielen, Michael and R{\"o}th, Thilo and Flatten, T.},
  title     = {Erfolgsfaktoren k{\"u}nftiger Gesch{\"a}ftsmodelle von urbanen, geteilten Mobilit{\"a}tsdienstleistungen},
  series = {Mobilit{\"a}t und digitale Transformation. (9. Wissenschaftsforum Mobilit{\"a}t. Tagungsband)},
  booktitle = {Mobilit{\"a}t und digitale Transformation. (9. Wissenschaftsforum Mobilit{\"a}t. Tagungsband)},
  editor    = {Proff, H.},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-20779-3},
  doi       = {10.1007/978-3-658-20779-3_2},
  pages     = {435 -- 448},
  year      = {2018},
  abstract  = {Digitalisierung bezeichnet die Nutzung großer Datenmengen, die zu einer umfassenden Vernetzung aller Bereiche der Wirtschaft und Gesellschaft f{\"u}hren wird (BMWi, 2015 und {\"a}hnlich K{\"o}hler/Wollschl{\"a}ger, 2014: 79). Sie umfasst die Erhebung von analogen Informationen („Big Data" in einem engen Sinne; z.B. O´Leary, 2013), ihre Speicherung in einem digitaltechnischen System (lokale Speicherung oder „Cloud Computing" durch die Weiterentwickelung des Internets; z.B. Hashem et al., 2015: 101), die Analyse und Interpretation sowie den Transfer in andere Systeme („Internet der Dinge" bzw. „Internet of Things"; z.B. Ashton, 2009).},
  language  = {de}
}
@article{SchifferFerrein2018,
  author    = {Schiffer, Stefan and Ferrein, Alexander},
  title     = {ERIKA—Early Robotics Introduction at Kindergarten Age},
  series = {Multimodal Technologies Interact},
  volume    = {2},
  journal   = {Multimodal Technologies Interact},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2414-4088},
  doi       = {10.3390/mti2040064},
  pages     = {15},
  year      = {2018},
  abstract  = {In this work, we report on our attempt to design and implement an early introduction to basic robotics principles for children at kindergarten age. One of the main challenges of this effort is to explain complex robotics contents in a way that pre-school children could follow the basic principles and ideas using examples from their world of experience. What sets apart our effort from other work is that part of the lecturing is actually done by a robot itself and that a quiz at the end of the lesson is done using robots as well. The humanoid robot Pepper from Softbank, which is a great platform for human-robot interaction experiments, was used to present a lecture on robotics by reading out the contents to the children making use of its speech synthesis capability. A quiz in a Runaround-game-show style after the lecture activated the children to recap the contents they acquired about how mobile robots work in principle. In this quiz, two LEGO Mindstorm EV3 robots were used to implement a strongly interactive scenario. Besides the thrill of being exposed to a mobile robot that would also react to the children, they were very excited and at the same time very concentrated. We got very positive feedback from the children as well as from their educators. To the best of our knowledge, this is one of only few attempts to use a robot like Pepper not as a tele-teaching tool, but as the teacher itself in order to engage pre-school children with complex robotics contents.},
  language  = {en}
}
@incollection{Czarnecki2018,
  author    = {Czarnecki, Christian},
  title     = {Establishment of a central process governance organization combined with operational process improvements : Insights from a BPM Project at a leading telecommunications operator in the Middle East},
  series = {Business process management cases : digital innovation and business transformation in practice},
  booktitle = {Business process management cases : digital innovation and business transformation in practice},
  editor    = {vom Brocke, Jan and Mendling, Jan},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-58306-8},
  doi       = {10.1007/978-3-319-58307-5},
  pages     = {57 -- 76},
  year      = {2018},
  abstract  = {Because of customer churn, strong competition, and operational inefficiencies, the telecommunications operator ME Telco (fictitious name due to confidentiality) launched a strategic transformation program that included a Business Process Management (BPM) project. Major problems were silo-oriented process management and missing cross-functional transparency. Process improvements were not consistently planned and aligned with corporate targets. Measurable inefficiencies were observed on an operational level, e.g., high lead times and reassignment rates of the incident management process.},
  language  = {en}
}
@article{HeinkeKnickerAlbracht2018,
  author    = {Heinke, Lars N. and Knicker, Axel J. and Albracht, Kirsten},
  title     = {Evaluation of passively induced shoulder stretch reflex using an isokinetic dynamometer in male overhead athletes},
  series = {Isokinetics and Exercise Science},
  volume    = {26},
  journal   = {Isokinetics and Exercise Science},
  number    = {4},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1878-5913},
  doi       = {10.3233/IES-184111},
  pages     = {265 -- 274},
  year      = {2018},
  abstract  = {BACKGROUND: Muscle stretch reflexes are widely considered to beneficially influence joint stability and power generation in the lower limbs. While in the upper limbs and especially in the muscles surrounding the shoulder joint such evidence is lacking. OBJECTIVE: To quantify the electromyographical response in the muscles crossing the shoulder of specifically trained overhead athletes to an anterior perturbation force. METHODS: Twenty healthy male participants performed six sets of different external shoulder rotation stretches on an isokinetic dynamometer over a range of amplitudes and muscle pre-activation moment levels. All stretches were applied with a dynamometer acceleration of 10,000∘/s2 and a velocity of 150∘/s. Electromyographical response was measured via sEMG. RESULTS: Consistent reflexes were not observed in all experimental conditions. The reflex latencies revealed a significant muscle main effect (F (2,228) = 99.31, p< 0.001; η2= 0.466; f= 0.934) and a pre-activation main effect (F (1,228) = 142.21, p< 0.001; η2= 0.384; f= 1.418). The stretch reflex amplitude yielded a significant pre-activation main effect (F (1,222) = 470.373, p< 0.001; η2= 0.679; f= 1.454). CONCLUSION: Short latency muscle reflexes showed a tendency to an anterior to posterior muscle recruitment whereby the main internal rotator muscles of the shoulder revealed the most consistent results.},
  language  = {en}
}
@inproceedings{RosinButenwegBoesenetal.2018,
  author    = {Rosin, Julia and Butenweg, Christoph and Boesen, Niklas and Gellert, Christoph},
  title     = {Evaluation of the Seismic Behavior of a Modern URM Building During the 2012 Northern Italy Earthquakes},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@article{EckertRudolphGuoetal.2018,
  author    = {Eckert, Alexander and Rudolph, Tobias and Guo, Jiaqi and Mang, Thomas and Walther, Andreas},
  title     = {Exceptionally Ductile and Tough Biomimetic Artificial Nacre with Gas Barrier Function},
  series = {Advanced Materials},
  volume    = {30},
  journal   = {Advanced Materials},
  number    = {32},
  publisher = {Wiley-VCH},
  doi       = {10.1002/adma.201802477},
  pages     = {Article number 1802477},
  year      = {2018},
  abstract  = {Synthetic mimics of natural high-performance structural materials have shown great and partly unforeseen opportunities for the design of multifunctional materials. For nacre-mimetic nanocomposites, it has remained extraordinarily challenging to make ductile materials with high stretchability at high fractions of reinforcements, which is however of crucial importance for flexible barrier materials. Here, highly ductile and tough nacre-mimetic nanocomposites are presented, by implementing weak, but many hydrogen bonds in a ternary nacre-mimetic system consisting of two polymers (poly(vinyl amine) and poly(vinyl alcohol)) and natural nanoclay (montmorillonite) to provide efficient energy dissipation and slippage at high nanoclay content (50 wt\%). Tailored interactions enable exceptional combinations of ductility (close to 50\% strain) and toughness (up to 27.5 MJ m⁻³). Extensive stress whitening, a clear sign of high internal dynamics at high internal cohesion, can be observed during mechanical deformation, and the materials can be folded like paper into origami planes without fracture. Overall, the new levels of ductility and toughness are unprecedented in highly reinforced bioinspired nanocomposites and are of critical importance to future applications, e.g., as barrier materials needed for encapsulation and as a printing substrate for flexible organic electronics.},
  language  = {en}
}
@article{JildehOberlaenderKirchneretal.2018,
  author    = {Jildeh, Zaid B. and Oberl{\"a}nder, Jan and Kirchner, Patrick and Keusgen, Michael and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Experimental and Numerical Analyzes of a Sensor Based on Interdigitated Electrodes for Studying Microbiological Alterations},
  series = {physica status solidi (a): applications and materials science},
  volume    = {215},
  journal   = {physica status solidi (a): applications and materials science},
  number    = {15},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201700920},
  pages     = {Artikel 1700920},
  year      = {2018},
  abstract  = {In this work, a cell-based biosensor to evaluate the sterilization efficacy of hydrogen peroxide vapor sterilization processes is characterized. The transducer of the biosensor is based on interdigitated gold electrodes fabricated on an inert glass substrate. Impedance spectroscopy is applied to evaluate the sensor behavior and the alteration of test microorganisms due to the sterilization process. These alterations are related to changes in relative permittivity and electrical conductivity of the bacterial spores. Sensor measurements are conducted with and without bacterial spores (Bacillus atrophaeus), as well as after an industrial sterilization protocol. Equivalent two-dimensional numerical models based on finite element method of the periodic finger structures of the interdigitated gold electrodes are designed and validated using COMSOL® Multiphysics software by the application of known dielectric properties. The validated models are used to compute the electrical properties at different sensor states (blank, loaded with spores, and after sterilization). As a final result, we will derive and tabulate the frequency-dependent electrical parameters of the spore layer using a novel model that combines experimental data with numerical optimization techniques.},
  language  = {en}
}
@inproceedings{ButenwegMarinkovicFehlingetal.2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Fehling, Ekkehard and Pfetzing, Thomas and Kubalski, Thomas},
  title     = {Experimental and Numerical Investigations of Reinforced Concrete Frames with Masonry Infills under Combined In- and Out-of-plane Seismic Loading},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@article{BirklDiendorferKernetal.2018,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extrem hohe Blitzstr{\"o}me},
  series = {Elektropraktiker},
  volume    = {72},
  journal   = {Elektropraktiker},
  number    = {3},
  publisher = {Huss Medien},
  address   = {Berlin},
  pages     = {217 -- 225},
  year      = {2018},
  abstract  = {Blitze sind nach wie vor eine enorme Schadensquelle f{\"u}r Personensch{\"a}den, Br{\"a}nde, mechanische Zerst{\"o}rungen und insbesondere auch {\"U}berspannungen. Das zeigen nicht zuletzt aktuelle Statistiken der Schadensversicherer. Immer wieder gibt es Meldungen {\"u}ber extrem hohe Blitzstr{\"o}me, die nat{\"u}rlich auch zu großen Sch{\"a}den und Zerst{\"o}rungen f{\"u}hren k{\"o}nnen. Dabei werden Scheitelwerte von teilweise deutlich {\"u}ber 300 kA genannt. Dies wirft Fragen auf, da die „klassische" Blitzstatistik (z. B. nach CIGRE und IEC [8][10]) bisher solche Werte nicht kennt. Diese extremen Blitzstr{\"o}me werden meist aus den Daten von Blitzortungssystemen ermittelt.},
  language  = {de}
}
@inproceedings{BirklDiendorferKernetal.2018,
  author    = {Birkl, Josef and Diendorfer, Gerhard and Kern, Alexander and Thern, Stephan},
  title     = {Extremely high lightning peak currents},
  series = {34th International Conference on Ligntning Protection, 02-07 September 2018},
  booktitle = {34th International Conference on Ligntning Protection, 02-07 September 2018},
  isbn      = {978-1-5386-6635-7},
  pages     = {7 Seiten},
  year      = {2018},
  language  = {en}
}
@misc{FriedericiHojdis2018,
  author    = {Friederici, Nadja-Annette and Hojdis, Nils},
  title     = {Fahrzeugreifen},
  year      = {2018},
  abstract  = {Die Erfindung betrifft einen Fahrzeugreifen mit zumindest einem radial außen befindlichen Gummilaufstreifen, Wulstbereichen f{\"u}r den Anschluss an eine Felge und mit auf einer Gummimischung basierenden Seitenwandbereichen zwischen Gummilaufstreifen und den Wulstbereichen. Ferner betrifft die Erfindung Verfahren zur Herstellung solcher Fahrzeugreifen. Um den Anteil der umweltsch{\"a}dlichen Substanzen, insbesondere im Innenstadtbereich, zu reduzieren weisen die Seitenwandbereiche auf der {\"a}ußeren Oberfl{\"a}che eine f{\"u}r den oxidativen Abbau von Molek{\"u}len photokatalytisch aktive Substanz auf.},
  language  = {de}
}
@article{LapitanRogatkinPersheyevetal.2018,
  author    = {Lapitan, Denis G. and Rogatkin, Dmitrii A. and Persheyev, Sydulla K. and Kotliar, Konstantin},
  title     = {False spectra formation in the differential two-channel scheme of the laser Doppler flowmeter},
  series = {Biomedizinische Technik},
  volume    = {63},
  journal   = {Biomedizinische Technik},
  number    = {4},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {0013-5585},
  doi       = {10.1515/bmt-2017-0060},
  pages     = {439 -- 444},
  year      = {2018},
  abstract  = {Noise in the differential two-channel scheme of a classic laser Doppler flowmetry (LDF) instrument was studied. Formation of false spectral components in the output signal due to beating of electrical signals in the differential amplifier was found out. The improved block-diagram of the flowmeter was developed allowing to reduce the noise.},
  language  = {en}
}
@incollection{ChwallekGoelzerReichert2018,
  author    = {Chwallek, Constanze and G{\"o}lzer, Kaan and Reichert, Walter},
  title     = {Faymonville - Wachstum als Komplexit{\"a}tstreiber},
  series = {Fallstudienkompendium Hidden Champions - Innovationen f{\"u}r den Weltmarkt},
  booktitle = {Fallstudienkompendium Hidden Champions - Innovationen f{\"u}r den Weltmarkt},
  publisher = {Springer Gabler},
  isbn      = {978-3-658-17829-1},
  doi       = {10.1007/978-3-658-17829-1_18},
  pages     = {299 -- 312},
  year      = {2018},
  abstract  = {Die Fallstudie FAYMONVILLE besch{\"a}ftigt sich damit, wie es dem Familienunternehmen Faymonville aus Ostbelgien gelungen ist, sich zu einem der f{\"u}hrenden Hersteller in seiner Branche zu entwickeln. Die gezielte Identifizierung neuer M{\"a}rkte, die Fokussierung auf die relevanten Kundenbed{\"u}rfnisse und eine konsistente Produktpolitik mit einem abgestimmten Fertigungskonzept legen die Grundsteine f{\"u}r den Erfolg. Das vorliegende Fallbeispiel zeigt anschaulich, wie es gelingen kann, den prinzipiellen Widerspruch zwischen wirtschaftlicher und kundenindividueller Fertigung erfolgreich aufzul{\"o}sen.},
  language  = {de}
}
@article{PoghossianJablonskiKochetal.2018,
  author    = {Poghossian, Arshak and Jablonski, Melanie and Koch, Claudia and Bronder, Thomas and Rolka, David and Wege, Christina and Sch{\"o}ning, Michael Josef},
  title     = {Field-effect biosensor using virus particles as scaffolds for enzyme immobilization},
  series = {Biosensors and Bioelectronics},
  volume    = {110},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2018.03.036},
  pages     = {168 -- 174},
  year      = {2018},
  abstract  = {A field-effect biosensor employing tobacco mosaic virus (TMV) particles as scaffolds for enzyme immobilization is presented. Nanotubular TMV scaffolds allow a dense immobilization of precisely positioned enzymes with retained activity. To demonstrate feasibility of this new strategy, a penicillin sensor has been developed by coupling a penicillinase with virus particles as a model system. The developed field-effect penicillin biosensor consists of an Al-p-Si-SiO₂-Ta₂O₅-TMV structure and has been electrochemically characterized in buffer solutions containing different concentrations of penicillin G. In addition, the morphology of the biosensor surface with virus particles was characterized by scanning electron microscopy and atomic force microscopy methods. The sensors possessed a high penicillin sensitivity of ~ 92 mV/dec in a nearly-linear range from 0.1 mM to 10 mM, and a low detection limit of about 50 µM. The long-term stability of the penicillin biosensor was periodically tested over a time period of about one year without any significant loss of sensitivity. The biosensor has also been successfully applied for penicillin detection in bovine milk samples.},
  language  = {en}
}
@article{VahidpourOberlaenderSchoening2018,
  author    = {Vahidpour, Farnoosh and Oberl{\"a}nder, Jan and Sch{\"o}ning, Michael Josef},
  title     = {Flexible Calorimetric Gas Sensors for Detection of a Broad Concentration Range of Gaseous Hydrogen Peroxide: A Step Forward to Online Monitoring of Food-Package Sterilization Processes},
  series = {Phys. Status Solidi A},
  volume    = {215},
  journal   = {Phys. Status Solidi A},
  number    = {15},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/pssa.201800044},
  pages     = {Artikel 1800044},
  year      = {2018},
  abstract  = {In this study, flexible calorimetric gas sensors are developed for specificdetection of gaseous hydrogen peroxide (H₂O₂) over a wide concentrationrange, which is used in sterilization processes for aseptic packaging industry.The flexibility of these sensors is an advantage for identifying the chemical components of the sterilant on the corners of the food boxes, so-called "coldspots", as critical locations in aseptic packaging, which are of great importance. These sensors are fabricated on flexible polyimide films by means of thin-film technique. Thin layers of titanium and platinum have been deposited on polyimide to define the conductive structures of the sensors. To detect the high-temperature evaporated H₂O₂, a differential temperature set-up is proposed. The sensors are evaluated in a laboratory-scaled sterilizationsystem to simulate the sterilization process. The concentration range of the evaporated H₂O₂ from 0 to 7.7\% v/v was defined and the sensors have successfully detected high as well as low H₂O₂ concentrations with a sensitivity of 5.04 °C/\% v/v. The characterizations of the sensors confirm their precise fabrication, high sensitivity and the novelty of low H₂O₂ concentration detections for future inline monitoring of food-package sterilization.},
  language  = {en}
}
@inproceedings{MichelButenwegKlinkel2018,
  author    = {Michel, Philipp and Butenweg, Christoph and Klinkel, Sven},
  title     = {Frequency Dependent Impedance Analysis of the Foundation-Soil-Systems of Onshore Wind Turbines},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 13},
  year      = {2018},
  language  = {en}
}
@incollection{ArtmannMeruvuKizildagetal.2018,
  author    = {Artmann, Gerhard and Meruvu, Haritha and Kizildag, Sefa and Temiz Artmann, Ayseg{\"u}l},
  title     = {Functional Toxicology and Pharmacology Test of Cell Induced Mechanical Tensile Stress in 2D and 3D Tissue Cultures},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_7},
  pages     = {157 -- 192},
  year      = {2018},
  abstract  = {Mechanical forces/tensile stresses are critical determinants of cellular growth, differentiation and migration patterns in health and disease. The innovative "CellDrum technology" was designed for measuring mechanical tensile stress of cultured cell monolayers/thin tissue constructs routinely. These are cultivated on very thin silicone membranes in the so-called CellDrum. The cell layers adhere firmly to the membrane and thus transmit the cell forces generated. A CellDrum consists of a cylinder which is sealed from below with a 4 μm thick, biocompatible, functionalized silicone membrane. The weight of cell culture medium bulbs the membrane out downwards. Membrane indentation is measured. When cells contract due to drug action, membrane, cells and medium are lifted upwards. The induced indentation changes allow for lateral drug induced mechanical tension quantification of the micro-tissues. With hiPS-induced (human) Cardiomyocytes (CM) the CellDrum opens new perspectives of individualized cardiac drug testing. Here, monolayers of self-beating hiPS-CMs were grown in CellDrums. Rhythmic contractions of the hiPS-cells induce membrane up-and-down deflections. The recorded cycles allow for single beat amplitude, single beat duration, integration of the single beat amplitude over the beat time and frequency analysis. Dose effects of agonists and antagonists acting on Ca2+ channels were sensitively and highly reproducibly observed. Data were consistent with published reference data as far as they were available. The combination of the CellDrum technology with hiPS-Cardiomyocytes offers a fast, facile and precise system for pharmacological and toxicological studies. It allows new preclinical basic as well as applied research in pharmacolgy and toxicology.},
  language  = {en}
}
@inproceedings{ChristianMontagSchubaetal.2018,
  author    = {Christian, Esser and Montag, Tim and Schuba, Marko and Allhof, Manuel},
  title     = {Future critical infrastructure and security - cyberattacks on charging stations},
  series = {31st International Electric Vehicle Symposium \& Exhibition and International Electric Vehicle Technology Conference (EVS31 \& EVTeC 2018)},
  booktitle = {31st International Electric Vehicle Symposium \& Exhibition and International Electric Vehicle Technology Conference (EVS31 \& EVTeC 2018)},
  publisher = {Society of Automotive Engineers of Japan (JSAE)},
  address   = {Tokyo},
  isbn      = {978-1-5108-9157-9},
  pages     = {665 -- 671},
  year      = {2018},
  language  = {en}
}
@inproceedings{UibelMoorkamp2018,
  author    = {Uibel, Thomas and Moorkamp, Wilfried},
  title     = {Geh- und Radwegbr{\"u}cken in NRW - Bestandsanalyse und Perspektiven},
  series = {Holzbr{\"u}ckenbau in der Offensive : Erhaltung, Ert{\"u}chtigung, Neubauten : 5. Internationale Holzbr{\"u}ckentage (IHB 2018) FILharmonie Filderstadt, Filderstadt/Stuttgart (DE), 17./18. April 2018},
  booktitle = {Holzbr{\"u}ckenbau in der Offensive : Erhaltung, Ert{\"u}chtigung, Neubauten : 5. Internationale Holzbr{\"u}ckentage (IHB 2018) FILharmonie Filderstadt, Filderstadt/Stuttgart (DE), 17./18. April 2018},
  publisher = {forum-holzbau},
  address   = {Biel},
  isbn      = {978-3-906226-19-4},
  pages     = {19 -- 32},
  year      = {2018},
  language  = {de}
}
@misc{Golland2018,
  author    = {Golland, Alexander},
  title     = {Gemeinsame Verantwortlichkeit in mehrstufigen Verarbeitungsszenarien},
  series = {K\&R Kommunikation \& Recht},
  journal   = {K\&R Kommunikation \& Recht},
  number    = {7-8},
  publisher = {Deutscher Fachverlag GmbH, Fachmedien Recht und Wirtschaft},
  address   = {Frankfurt a. M.},
  issn      = {1434-6354},
  pages     = {433 -- 438},
  year      = {2018},
  language  = {de}
}
@article{Golland2018,
  author    = {Golland, Alexander},
  title     = {Gemeinsame Verantwortlichkeit in mehrstufigen Verarbeitungsszenarien},
  volume    = {21},
  number    = {7-8},
  publisher = {dfv Mediengruppe},
  address   = {Frankfurt a.M.},
  issn      = {1434-6354},
  pages     = {433 -- 438},
  year      = {2018},
  abstract  = {Die Rechtsfigur der gemeinsamen Verantwortlichkeit besch{\"a}ftigt die datenschutzrechtliche Literatur seit Langem. Die Bestimmung der Verantwortlichkeit bei arbeitsteiligen Verarbeitungsverfahren, welche vor allem bei heutigen Plattformdiensten {\"u}blich sind, ist komplex: Stets sind mehrere Akteure beteiligt und in der Regel werden durch die Handlung eines Beteiligten mehrere Verarbeitungsschritte ausgel{\"o}st. Nun hat sich der EuGH in einem in mehrfacher Hinsicht bemerkenswerten Urteil ge{\"a}ußert.},
  language  = {de}
}
@inproceedings{UlmerBraunWollert2018,
  author    = {Ulmer, Jessica and Braun, Sebastian and Wollert, J{\"o}rg},
  title     = {Generische IoT Adapter f{\"u}r semantische Maschinenschnittstellen},
  series = {Internet of Things - vom Sensor bis zur Cloud},
  booktitle = {Internet of Things - vom Sensor bis zur Cloud},
  pages     = {1 -- 5},
  year      = {2018},
  language  = {de}
}
@article{KoenigWolf2018,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin},
  title     = {GHOST: An Evaluated Competence Developing Game for Cybersecurity Awareness Training},
  series = {International Journal on Advances in Security},
  volume    = {11},
  journal   = {International Journal on Advances in Security},
  number    = {3 \& 4},
  publisher = {IARIA Journals},
  issn      = {1942-2636},
  pages     = {274 -- 287},
  year      = {2018},
  abstract  = {To train end users how to interact with digital systems is indispensable to ensure a strong computer security. 'Competence Developing Game'-based approaches are particularly suitable for this purpose because of their motivation-and simulation-aspects. In this paper the Competence Developing Game 'GHOST' for cybersecurity awareness trainings and its underlying patterns are described. Accordingly, requirements for an 'Competence Developing Game' based training are discussed. Based on these requirements it is shown how a game can fulfill these requirements. A supplementary game interaction design and a corresponding evaluation study is shown. The combination of training requirements and interaction design is used to create a 'Competence Developing Game'-based training concept. A part of these concept is implemented into a playable prototype that serves around one hour of play respectively training time. This prototype is used to perform an evaluation of the game and training aspects of the awareness training. Thereby, the quality of the game aspect and the effectiveness of the training aspect are shown.},
  language  = {en}
}
@incollection{DuongSeifarthTemizArtmannetal.2018,
  author    = {Duong, Minh Tuan and Seifarth, Volker and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard and Staat, Manfred},
  title     = {Growth Modelling Promoting Mechanical Stimulation of Smooth Muscle Cells of Porcine Tubular Organs in a Fibrin-PVDF Scaffold},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_9},
  pages     = {209 -- 232},
  year      = {2018},
  abstract  = {Reconstructive surgery and tissue replacements like ureters or bladders reconstruction have been recently studied, taking into account growth and remodelling of cells since living cells are capable of growing, adapting, remodelling or degrading and restoring in order to deform and respond to stimuli. Hence, shapes of ureters or bladders and their microstructure change during growth and these changes strongly depend on external stimuli such as training. We present the mechanical stimulation of smooth muscle cells in a tubular fibrin-PVDFA scaffold and the modelling of the growth of tissue by stimuli. To this end, mechanotransduction was performed with a kyphoplasty balloon catheter that was guided through the lumen of the tubular structure. The bursting pressure was examined to compare the stability of the incubated tissue constructs. The results showed the significant changes on tissues with training by increasing the burst pressure as a characteristic mechanical property and the smooth muscle cells were more oriented with uniformly higher density. Besides, the computational growth models also exhibited the accurate tendencies of growth of the cells under different external stimuli. Such models may lead to design standards for the better layered tissue structure in reconstructing of tubular organs characterized as composite materials such as intestines, ureters and arteries.},
  language  = {en}
}
@article{SchmidtEnningPfaff2018,
  author    = {Schmidt, Bernd and Enning, Manfred and Pfaff, Raphael},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge Teil 3: Einf{\"u}hrungsszenarien f{\"u}r aktive, kommunikative G{\"u}terwagen},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {67},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {60 -- 64},
  year      = {2018},
  abstract  = {Wenn durch innovative, automatisierte G{\"u}terwagen betriebswirtschaftliche Vorteile nutzbar gemacht werden sollen, muss die Migration auf das neue System in sinnvollen Teilschritten unter Ber{\"u}cksichtigung der organisationellen und betrieblichen Vereinbarkeit vorgenommen werden. Eine stufenweise Migration mit Nachr{\"u}stbarkeit und Kompatibilit{\"a}t kann die optimale Ausstattungsvariante f{\"u}r die unterschiedlichen Betriebsszenarien sowie eine Steigerung der Wirtschaftlichkeit des Gesamtsystems bieten.},
  language  = {de}
}
@inproceedings{BungValeroHermens2018,
  author    = {Bung, Daniel B. and Valero, Daniel and Hermens, G.},
  title     = {Hybrid investigation on the hydraulic performance of a new trapezoidal fishway},
  series = {7th IAHR International Symposium on Hydraulic Structures, ISHS 2018},
  booktitle = {7th IAHR International Symposium on Hydraulic Structures, ISHS 2018},
  isbn      = {978-069213277-7},
  doi       = {10.15142/T3S06R},
  pages     = {184 -- 193},
  year      = {2018},
  language  = {de}
}
@inproceedings{BungTullis2018,
  author    = {Bung, Daniel B. and Tullis, Blake},
  title     = {Hydraulic Structures - ISHS2018 in Perspective},
  series = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May},
  booktitle = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May},
  isbn      = {978-0-692-13277-7},
  doi       = {10.15142/T3WH2B},
  pages     = {9 seiten},
  year      = {2018},
  language  = {en}
}
@article{FingerBraunBil2018,
  author    = {Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Impact of electric propulsion technology and mission requirements on the performance of VTOL UAVs},
  series = {CEAS Aeronautical Journal},
  volume    = {10},
  journal   = {CEAS Aeronautical Journal},
  number    = {3},
  publisher = {Springer},
  issn      = {1869-5582 print},
  doi       = {10.1007/s13272-018-0352-x},
  pages     = {843},
  year      = {2018},
  abstract  = {One of the engineering challenges in aviation is the design of transitioning vertical take-off and landing (VTOL) aircraft. Thrust-borne flight implies a higher mass fraction of the propulsion system, as well as much increased energy consumption in the take-off and landing phases. This mass increase is typically higher for aircraft with a separate lift propulsion system than for aircraft that use the cruise propulsion system to support a dedicated lift system. However, for a cost-benefit trade study, it is necessary to quantify the impact the VTOL requirement and propulsion configuration has on aircraft mass and size. For this reason, sizing studies are conducted. This paper explores the impact of considering a supplemental electric propulsion system for achieving hovering flight. Key variables in this study, apart from the lift system configuration, are the rotor disk loading and hover flight time, as well as the electrical systems technology level for both batteries and motors. Payload and endurance are typically used as the measures of merit for unmanned aircraft that carry electro-optical sensors, and therefore the analysis focuses on these particular parameters.},
  language  = {en}
}