@inproceedings{ThurnGebhardt2018,
  author    = {Thurn, Laura and Gebhardt, Andreas},
  title     = {Strategy of Education on Materials for Students},
  series = {Conference Proceedings: „New Perspectives in Science Education"},
  booktitle = {Conference Proceedings: „New Perspectives in Science Education"},
  address   = {Florence, Italy},
  isbn      = {978-88-6292-976-9},
  pages     = {156 -- 161},
  year      = {2018},
  language  = {en}
}
@book{Laack2005,
  author    = {Laack, Walter van},
  title     = {Mit Logik die Welt begreifen},
  publisher = {van Laack},
  address   = {Aachen},
  isbn      = {978-3-936624-07-6},
  pages     = {380 S. : Ill., graph. Darst.},
  year      = {2005},
  language  = {de}
}
@article{GerigkMaassTakorsetal.2000,
  author    = {Gerigk, M. and Maaß, D. and Takors, Ralf and Kreutzer, A. and Wandrey, Christian and Bongaerts, Johannes and Wubbolts, Marcel},
  title     = {Fermentative Herstellung von L-Phenylalanin im Fed-Batch Verfahren mit E. coli unter Einbindung eines integrierten Aufarbeitungsverfahrens},
  series = {Chemie-Ingenieur-Technik (CIT)},
  volume    = {Vol. 72},
  journal   = {Chemie-Ingenieur-Technik (CIT)},
  number    = {Iss. 9},
  issn      = {1522-2640 (E-Journal); 0009-286X (Print)},
  pages     = {926 -- 927},
  year      = {2000},
  language  = {de}
}
@masterthesis{Voth2022,
  type      = {Bachelor Thesis},
  author    = {Voth, Emily},
  title     = {KiWA : Die Garderobe f{\"u}r kleine Selbstst{\"a}ndige},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {117 Seiten},
  year      = {2022},
  abstract  = {Kindertagesst{\"a}tten bieten Kleinkindern den Zugang zu unbeschwertem und spielerischem Lernen. Was also, wenn schon der Eingangsbereich die Reiz{\"u}berflutung bereit h{\"a}lt, der Stauraum der Entfaltung der Kinder nicht gerecht wird und ihre Eigenst{\"a}ndigkeit ungef{\"o}rdert bleibt? Es kommt zu unzufriedenen Kindern und Frustration aller Beteilligten. "KIWA" ist das Garderobensystem f{\"u}r Kinder zur St{\"a}rkung der heranwachsenden Selbstst{\"a}ndigkeit. Mithilfe von pers{\"o}nlichen Wiedererkennungsmerkmalen wird Eigenverantwortung geschult. Leicht und sicher zu erreichender Stauraum sorgt f{\"u}r Ordnung. Spielerisches lernen trotz Ordnung.},
  language  = {de}
}
@misc{Golland2019,
  author    = {Golland, Alexander},
  title     = {Diensteerbringung darf nicht von der Erteilung einer Einwilligung abh{\"a}ngig gemacht werden (Urteil vom 31.08.2018)},
  series = {DSB Datenschutz-Berater},
  journal   = {DSB Datenschutz-Berater},
  number    = {1},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a. M.},
  issn      = {0170-7256},
  pages     = {15 -- 16},
  year      = {2019},
  language  = {de}
}
@inproceedings{ButenwegGajewskiThierauf1999,
  author    = {Butenweg, Christoph and Gajewski, R. and Thierauf, Georg},
  title     = {A practical approach for the optimum design of reinforced concrete structures},
  series = {Developments in computational mechanics with high performance computing : [papers presented at the Third Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held in Weimar, Germany between 20 - 25 March 1999] / ed. by B. H. V. Topping},
  booktitle = {Developments in computational mechanics with high performance computing : [papers presented at the Third Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held in Weimar, Germany between 20 - 25 March 1999] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Edinburgh},
  organization    = {Euro-Conference on Parallel and Distributed Computing for Computational Mechanics <3, 1999, Weimar>},
  isbn      = {0-94-8749-59-8},
  pages     = {245 -- 250},
  year      = {1999},
  language  = {en}
}
@article{Heuermann1995,
  author    = {Heuermann, Holger},
  title     = {LZY: A Self-Calibration Approach in Competition to the LRM Method for On-Wafer Measurements},
  pages     = {129 -- 136},
  year      = {1995},
  language  = {en}
}
@book{Laack2003,
  author    = {Laack, Walter van},
  title     = {A better history of our world / Vol. 3. Death},
  publisher = {van Laack},
  address   = {Aachen},
  isbn      = {978-3-936624-01-4},
  pages     = {276 S.},
  year      = {2003},
  language  = {en}
}
@phdthesis{Dahmann1992,
  author    = {Dahmann, Peter},
  title     = {Untersuchungen zur Wirksamkeit von Filtern in hydraulischen Anlagen},
  pages     = {VI, 160 S. : Ill., graph. Darst.},
  year      = {1992},
  language  = {de}
}
@article{Golland2020,
  author    = {Golland, Alexander},
  title     = {Die Zukunft internationaler Datentransfers: Quo vadis?},
  year      = {2020},
  abstract  = {Nach dem Scheitern des Privacy Shield hofft der Datenschutzberater Alexander Golland, dass die europ{\"a}ischen Beh{\"o}rden bald konkrete Maßnahmen f{\"u}r den Datentransfer in Drittl{\"a}nder vorschlagen. Auch kleine Unternehmen m{\"u}ssten die Herausforderung bew{\"a}ltigen - sonst w{\"a}re das Urteil nur Wasser auf die M{\"u}hlen jener, die ohnehin {\"u}ber den Datenschutz schimpfen.},
  language  = {de}
}
@article{Golland2020,
  author    = {Golland, Alexander},
  title     = {Datenschutzrechtliche Fragen personalisierter Preise — Herausforderungen von Algorithmen im Schnittbereich von Ethik, {\"O}konomie und Datenschutz},
  series = {CR Computer und Recht},
  volume    = {36},
  journal   = {CR Computer und Recht},
  number    = {3},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  isbn      = {2194-4172},
  doi       = {10.9785/cr-2020-360313},
  pages     = {186 -- 194},
  year      = {2020},
  language  = {de}
}
@article{HeuermannStolleSchiek1995,
  author    = {Heuermann, Holger and Stolle, Reinhard and Schiek, Burkhard},
  title     = {Auswertemethoden zur Praezisions-Entfernungsmessung mit FMCW-Systemen und deren Anwendung im Mikrowellenbereich},
  series = {tm - Technisches Messen. 62. 1995 (1995), H. 2},
  journal   = {tm - Technisches Messen. 62. 1995 (1995), H. 2},
  pages     = {66 -- 73},
  year      = {1995},
  language  = {de}
}
@article{LaackRefischOhnsorgeetal.1984,
  author    = {Laack, Walter van and Refisch, A. and Ohnsorge, J. and D{\"u}rselen, L.},
  title     = {Proximaler Femurteilersatz - Alternative zum Schaftwechsel zementfixierter H{\"u}ftendoprothesen},
  series = {Orthop{\"a}dische Praxis. 20 (1984), H. 11},
  journal   = {Orthop{\"a}dische Praxis. 20 (1984), H. 11},
  isbn      = {0030-588x},
  pages     = {856},
  year      = {1984},
  language  = {de}
}
@incollection{Fabo2002,
  author    = {Fabo, Sabine},
  title     = {K{\"u}nstlerische Begegnungen zwischen Chaos und Kontrolle : Joyce, Beuys und Cage},
  series = {Chaos/control:complexity : chaos theory cultural production (Work - science - medium ; 1)},
  booktitle = {Chaos/control:complexity : chaos theory cultural production (Work - science - medium ; 1)},
  editor    = {Hoffmann, Philipp},
  publisher = {LIT Verlag},
  address   = {Hamburg},
  isbn      = {3-8258-6096-5},
  year      = {2002},
  language  = {de}
}
@book{Lohse2002,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau. Bd. 1 : Mit 66 Tafeln und 71 Beispielen. 24., {\"u}berarb. und akt. Aufl.},
  publisher = {Teubner},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-25254-6},
  pages     = {348 S. : graph. Darst.},
  year      = {2002},
  language  = {de}
}
@incollection{Lohse2005,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.},
  publisher = {Teubner},
  address   = {Stuttgart},
  isbn      = {3-519-00489-5 ; 978-3-519-00489-9},
  pages     = {99 -- 136},
  year      = {2005},
  language  = {de}
}
@article{Golland2018,
  author    = {Golland, Alexander},
  title     = {Der r{\"a}umliche Anwendungsbereich der DS-GVO},
  series = {DuD Datenschutz und Datensicherheit},
  volume    = {42},
  journal   = {DuD Datenschutz und Datensicherheit},
  number    = {6},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {1862-2607},
  pages     = {351 -- 357},
  year      = {2018},
  abstract  = {Die Datenschutz-Grundverordnung (DS-GVO) regelt in ihrem Art. 3 das r{\"a}umlich anwendbare Datenschutzrecht und zielt dabei gerade auch auf Angebote nichteurop{\"a}ischer Diensteanbieter ab. Die bisherige Diskussion konzentriert sich bislang in erster Linie darauf, das eingef{\"u}hrte Marktortprinzip zu thematisieren; das weitgehend unangetastete Niederlassungsprinzip und vor allem die Probleme, die sich durch dessen unver{\"a}nderte Beibehaltung ergeben, werden dagegen nicht er{\"o}rtert. Der folgende Beitrag versucht sich an einer systematischen Analyse eines teils kontrovers, teils kaum diskutierten Themas.},
  language  = {de}
}
@article{WolfFoltzSchlicketal.2002,
  author    = {Wolf, Martin R. and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Development and evaluation of a groupware system to support chemical design processes / Wolf, Martin ; Foltz, Christian ; Schlick, Christopher ; Luczak, Holger},
  series = {International Journal of Human-Computer Interaction . 14 (2002), H. 2},
  journal   = {International Journal of Human-Computer Interaction . 14 (2002), H. 2},
  publisher = {-},
  isbn      = {1044-7318},
  pages     = {181 -- 198},
  year      = {2002},
  language  = {en}
}
@article{BongaertsZoschkeWeidneretal.1995,
  author    = {Bongaerts, Johannes and Zoschke, Sascha and Weidner, Uwe and Linden, Gottfried},
  title     = {Transcriptional regulation of the proton translocating NADH},
  series = {Molecular microbiology},
  volume    = {Vol. 16},
  journal   = {Molecular microbiology},
  number    = {Iss. 3},
  issn      = {1365-2958 (E-Journal); 0950-382x (Print)},
  pages     = {521 -- 534},
  year      = {1995},
  language  = {en}
}
@article{Staat1996,
  author    = {Staat, Manfred},
  title     = {Problems and Chances for Probabilistic Fracture Mechanics in the Analysis of Steel Pressure Boundary Reliability},
  series = {Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in J{\"u}lich, 21-24 November 1994},
  journal   = {Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in J{\"u}lich, 21-24 November 1994},
  address   = {Vienna},
  pages     = {43 -- 55},
  year      = {1996},
  language  = {en}
}
@article{Stulpe1988,
  author    = {Stulpe, Werner},
  title     = {Conditional Expectations, Conditional Distributions, and A Posteriori Ensembles in Generalized Probability Theory},
  series = {International Journal of Theoretical Physics. 27 (1988), H. 5},
  journal   = {International Journal of Theoretical Physics. 27 (1988), H. 5},
  isbn      = {1572-9575},
  pages     = {587 -- 611},
  year      = {1988},
  language  = {en}
}
@incollection{Fabo2002,
  author    = {Fabo, Sabine},
  title     = {Intermedia light : zur Erf{\"u}llung syn{\"a}sthetischer Phantasien in Echtzeit},
  series = {Mediale Performanzen : historische Konzepte und Perspektiven (Rombach Wissenschaften : Reihe Litterae ; 97)},
  booktitle = {Mediale Performanzen : historische Konzepte und Perspektiven (Rombach Wissenschaften : Reihe Litterae ; 97)},
  editor    = {Eming, Jutta},
  publisher = {Rombach Verlag},
  address   = {Freiburg im Breisgau},
  isbn      = {3-7930-9344-1},
  pages     = {197 -- 220},
  year      = {2002},
  language  = {de}
}
@book{Lohse2000,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau. Thiele, Albrecht [Hrsg.], Lohse, Wolfram [Bearb.] Bd. 2. 19., {\"u}berarb. Aufl.},
  publisher = {Teubner},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-15255-X},
  pages     = {378 S. : graph. Darst.},
  year      = {2000},
  language  = {de}
}
@article{Laack1986,
  author    = {Laack, Walter van},
  title     = {Allgemeine physiotherapeutische Behandlung nach H{\"u}ft- und Kniegelenkoperationen},
  series = {Physiotherapie. 77 (1986), H. 2},
  journal   = {Physiotherapie. 77 (1986), H. 2},
  isbn      = {0031-9392},
  pages     = {68 -- 72},
  year      = {1986},
  language  = {de}
}
@article{Golland2019,
  author    = {Golland, Alexander},
  title     = {Reichweite des "Joint Controllership": Neue Fragen der gemeinsamen Verantwortlichkeit},
  series = {K\&R Kommunikation \& Recht},
  volume    = {22},
  journal   = {K\&R Kommunikation \& Recht},
  number    = {9},
  publisher = {dfv Mediengruppe, Deutscher Fachverlag GmbH},
  address   = {Frankfurt am Main},
  issn      = {1434-6354},
  pages     = {533 -- 537},
  year      = {2019},
  abstract  = {Kein Urteil zum Datenschutzrecht sorgte im vergangenen Jahr f{\"u}r mehr panische Reaktionen als die Entscheidung des EuGH in der Rechtssache "Wirtschaftsakademie Schleswig-Holstein"(C-210/16). Das Urteil warf in datenschutzrechtlicher Literatur und {\"O}ffentlichkeit zahlreiche Fragen auf: Ist jetzt jeder "gemeinsam" Verantwortlicher? Was sind die Kriterien? Der EuGH hat k{\"u}rzlich in einem - dem allgemeinen Vernehmen nach aufsehenerregenden, de facto aber kaum {\"u}berraschenden - Urteil f{\"u}r Klarheit gesorgt. Dabei hat das Gericht jedoch einige Fragen offengelassen und neue Fragen aufgeworfen. Ein Blick auf alte und neue Herausforderungen in Kooperationsszenarien.},
  language  = {de}
}
@misc{Nahrstedt2021,
  type      = {Master Thesis},
  author    = {Nahrstedt, Sarah},
  title     = {Any Cargo: Das Fahrrad als Hauptverkehrsmittel in der Stadt},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {216 Seiten},
  year      = {2021},
  abstract  = {Durch die Urbanisierung, wird es in St{\"a}dten immer enger und der Verkehr nimmt zu. Das hat hohe Emissionen und Platzmangel zur Folge. In der Masterarbeit wurde die Abh{\"a}ngigkeit zum Auto in der Stadt hinterfragt und ein Konzept erarbeitet, welches die Autonutzung und den Autobesitz abl{\"o}st. Dabei entstand ein neuer Fahrradanh{\"a}nger, der eine multifunktionale Nutzung zul{\"a}sst und einen elektrischen Antrieb besitzt. Dadurch bietet er einen komfortablen Support im Alltag. Zudem wurde ein Gesch{\"a}ftskonzept entwickelt, welches erm{\"o}glicht, den Anh{\"a}nger mit einem digitalen Ausleihsystem unter Nachbarn oder Freunden zu teilen. Ein wichtiges Kriterium f{\"u}r das Produkt und den Service war, dass die Mobilit{\"a}t der Zukunft nicht nur nachhaltig sein soll, sondern auch Laune machen muss.},
  language  = {de}
}
@masterthesis{Dieter2021,
  type      = {Bachelor Thesis},
  author    = {Dieter, Helen},
  title     = {Koji - Entwicklung eines h{\"o}henverstellbaren Tisches zur Nutzung in Wohn- und Essr{\"a}umen},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {135 Seiten},
  year      = {2021},
  abstract  = {Um den immer komplexer werdenden Anspr{\"u}chen an Wohnraum gerecht zu werden, braucht es M{\"o}bel, die vielseitig und anpassbar sind. Koji ist ein Tisch, dessen Tischplatte unkompliziert in der H{\"o}he verstellt werden und so in diversen Wohnsituationen eingesetzt werden kann. Er kann als Esstisch genauso genutzt werden wie als Beistell- oder Couchtisch. Durch die Mechanik, die die H{\"o}henverstellbarkeit erm{\"o}glicht, bekommt der Tisch einen verspielten, beinahe lebendigen Charakter, der zur Interaktion einl{\"a}dt. Er ist mehr als ein stummer Begleiter des Alltags, sondern vielmehr Inspiration, seine Umgebung aktiv zu gestalten, um sie so f{\"u}r sich optimal einzurichten.},
  language  = {de}
}
@misc{Golland2020,
  author    = {Golland, Alexander},
  title     = {Rezension zu: Kipker - Rechtshandbuch Cybersecurity (2020)},
  series = {DSB Datenschutz-Berater},
  volume    = {44},
  journal   = {DSB Datenschutz-Berater},
  number    = {7-8},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  issn      = {0170-7256},
  pages     = {192},
  year      = {2020},
  language  = {de}
}
@misc{Golland2020,
  author    = {Golland, Alexander},
  title     = {Rezension zu: Gabel/Heinrich/Kiefner - Rechtshandbuch Cyber-Security (2019)},
  series = {K\&R Kommunikation \& Recht},
  journal   = {K\&R Kommunikation \& Recht},
  number    = {6},
  issn      = {1434-6354},
  pages     = {VII},
  year      = {2020},
  language  = {de}
}
@article{JanusAchtsnichtDrinicetal.2023,
  author    = {Janus, Kevin Alexander and Achtsnicht, Stefan and Drinic, Aleksander and Kopp, Alexander and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Transient magnesium-based thin-film temperature sensor on a flexible, bioabsorbable substrate for future medical applications},
  series = {Applied Research},
  journal   = {Applied Research},
  number    = {Accepted manuscript},
  publisher = {Wiley-VCH},
  issn      = {2702-4288 (Print)},
  doi       = {10.1002/appl.202300102},
  pages     = {22 Seiten},
  year      = {2023},
  abstract  = {In this work, the bioabsorbable materials, namely fibroin, polylactide acid (PLA), magnesium and magnesium oxide are investigated for their application as transient, resistive temperature detectors (RTD). For this purpose, a thin-film magnesium-based meander-like electrode is deposited onto a flexible, bioabsorbable substrate (fibroin or PLA) and encapsulated (passivated) by additional magnesium oxide layers on top and below the magnesium-based electrode. The morphology of different layered RTDs is analyzed by scanning electron microscopy. The sensor performance and lifetime of the RTD is characterized both under ambient atmospheric conditions between 30°C and 43°C, and wet tissue-like conditions with a constant temperature regime of 37°C. The latter triggers the degradation process of the magnesium-based layers. The 3-layers RTDs on a PLA substrate could achieve a lifetime of 8.5 h. These sensors also show the best sensor performance under ambient atmospheric conditions with a mean sensitivity of 0.48 Ω/°C ± 0.01 Ω/°C.},
  language  = {en}
}
@article{JanusAchtsnichtTempeletal.2023,
  author    = {Janus, Kevin Alexander and Achtsnicht, Stefan and Tempel, Laura and Drinic, Aleksaner and Kopp, Alexander and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Influence of fibroin membrane composition and curing parameters on the performance of a biodegradable enzymatic biosensor manufactured from Silicon-Free Carbon},
  series = {Physica status solidi : pss. A, Applications and materials science},
  volume    = {220},
  journal   = {Physica status solidi : pss. A, Applications and materials science},
  number    = {22},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6300 (Print)},
  doi       = {10.1002/pssa.202300081},
  pages     = {10 Seiten},
  year      = {2023},
  abstract  = {Herein, fibroin, polylactide (PLA), and carbon are investigated for their suitability as biocompatible and biodegradable materials for amperometric biosensors. For this purpose, screen-printed carbon electrodes on the biodegradable substrates fibroin and PLA are modified with a glucose oxidase membrane and then encapsulated with the biocompatible material Ecoflex. The influence of different curing parameters of the carbon electrodes on the resulting biosensor characteristics is studied. The morphology of the electrodes is investigated by scanning electron microscopy, and the biosensor performance is examined by amperometric measurements of glucose (0.5-10 mM) in phosphate buffer solution, pH 7.4, at an applied potential of 1.2 V versus a Ag/AgCl reference electrode. Instead of Ecoflex, fibroin, PLA, and wound adhesive are tested as alternative encapsulation compounds: a series of swelling tests with different fibroin compositions, PLA, and Ecoflex has been performed before characterizing the most promising candidates by chronoamperometry. Therefore, the carbon electrodes are completely covered with the particular encapsulation material. Chronoamperometric measurements with H2O2 concentrations between 0.5 and 10 mM enable studying the leakage current behavior.},
  language  = {en}
}
@phdthesis{Achtsnicht2020,
  author    = {Achtsnicht, Stefan},
  title     = {Multiplex-Magnetdetektion von superparamagnetischen Beads zur Identifizierung von Trinkwasserkontaminationen},
  doi       = {10.18154/RWTH-2020-12052},
  pages     = {144 Seiten},
  year      = {2020},
  abstract  = {Die qualitative und quantitative Detektion von Zielsubstanzen innerhalb einer w{\"a}ssrigen Probe ist f{\"u}r viele Fragestellungen von Interesse, etwa bei der Detektion von Kontaminationen in Trinkwasser in Krisensituationen. Hierbei ist es nicht nur wichtig, dass Pathogene m{\"o}glichst sensitiv detektiert werden k{\"o}nnen, sondern auch, dass die Analyse schnell erfolgt, um Betroffenen im Katastrophenfall z{\"u}gig sicheres Trinkwasser zu Verf{\"u}gung stellen zu k{\"o}nnen. Da bei einem solchen Szenario nicht von einer in der N{\"a}he befindlichen funktionierenden Laborinfrastruktur ausgegangen werden kann, ist es wichtig, dass die Messung direkt vor Ort erfolgen kann. Im Rahmen dieser Arbeit wurde untersucht, ob eine derartige Schnellanalytik mithilfe von superparamagnetischen Beads (MBs) und der magnetischen Frequenzmischtechnik m{\"o}glich ist. Dabei werden die MBs mit Hilfe von prim{\"a}ren Antik{\"o}rpern an die Zielsubstanz gebunden und mit sekund{\"a}ren Antik{\"o}rpern an die Poren-Oberfl{\"a}che eines Polyethylen-Filters fixiert (Sandwich-Immunoassay). So kann die Quantifizierung der Zielsubstanz auf eine magnetische Messung der immobilisierten MB-Marker zur{\"u}ckgef{\"u}hrt werden. Die magnetische Frequenzmischtechnik basiert auf der Anregung der Probe mit Magnetfeldern zweier verschiedener Frequenzen. Die durch die nichtlineare Magnetisierungsform der superparamagnetischen MBs entstehenden Mischfrequenzen werden typischerweise mithilfe einer zweistufigen Lock-in-Detektion analysiert (analoge Demodulation), die in einem Magnetreader als Handheldger{\"a}t realisiert wurde. Zus{\"a}tzlich zu dieser Technik wurde das Prinzip der direkten Digitalisierung des gesamten Antwortsignals mit anschließender Fourier-Analyse der erzeugten Mischfrequenzen experimentell umgesetzt, um die Amplituden und Phasen mehrerer Mischfrequenzen simultan zu erfassen. Eine M{\"o}glichkeit zur Sensitivit{\"a}tssteigerung ist die magnetische Aufkonzentration, indem vor der magnetischen Analyse eine Separation der MBs aus einem gr{\"o}ßeren Probenvolumen mittels magnetischem Feldgradienten durchgef{\"u}hrt wird. Zur Charakterisierung verschiedener kommerzieller MBs hinsichtlich ihrer magnetischen Separierbarkeit wurde ein Aufbau zur Messung ihrer magnetophoretischen Beweglichkeiten realisiert und ihre Geschwindigkeiten im Gradientenfeld mikroskopisch gemessen.Da eine Probe oftmals nicht nur auf eine einzige Zielsubstanz, sondern simultan auf mehrere verschiedene Pathogene hin untersucht werden soll, wurden verschiedene Ans{\"a}tze entwickelt und getestet, die einen solchen multiparametrischen magnetischen Immunoassay erm{\"o}glichen. Einerseits wurde eine r{\"a}umliche Separation der Bindungsbereiche f{\"u}r verschiedene Zielsubstanzen realisiert, die sequentiell ausgewertet werden k{\"o}nnen. Andererseits wurde die Unterscheidung von verschiedenen Zielsubstanzen anhand der Charakteristika der an sie gebundenen, verschieden funktionalisierten MB-Typen untersucht. F{\"u}r eine solche Unterscheidung wurde zum einen die Anregefrequenz der magnetischen Frequenzmischtechnik w{\"a}hrend einer Messung variiert. Damit konnte gezeigt werden, dass sich verschiedene MB-Sorten anhand der Phase ihrer Frequenzmischsignale voneinander unterscheiden lassen. Weiterhin wurde gezeigt, dass sich der Signalverlauf einer bin{\"a}ren Mischung zweier verschiedener MB-Typen als gradueller {\"U}bergang der Verl{\"a}ufe der beiden reinen MB-L{\"o}sungen ergibt. Eine weitere Analysemethode f{\"u}r einen multiparametrischen Immunoassay besteht darin, ein zus{\"a}tzliches einstellbares statisches magnetisches Offsetfeld zu verwenden. Hierf{\"u}r wurden mehrere Aufbauten auf Basis von Permanent- und Elektromagneten simuliert, konstruiert und charakterisiert. Mithilfe von Simulationen konnte gezeigt werden, dass eine auf diesem Verfahren beruhende Unterscheidung f{\"u}r MBs mit unterschiedlichen magnetischen Partikelmomenten m{\"o}glich ist. Als direkte Anwendung des hier entwickelten Magnetreaders in Zusammenspiel mit der digitalen Demodulation wurde ein magnetischer Assay gegen die B-Untereinheit des Choleratoxins in Trinkwasser mit einem niedrigen Detektionslimit von 0,2 ng/ml demonstriert.},
  language  = {de}
}
@article{KarschuckPoghossianSeretal.2024,
  author    = {Karschuck, Tobias and Poghossian, Arshak and Ser, Joey and Tsokolakyan, Astghik and Achtsnicht, Stefan and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Capacitive model of enzyme-modified field-effect biosensors: Impact of enzyme coverage},
  series = {Sensors and Actuators B: Chemical},
  volume    = {408},
  journal   = {Sensors and Actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005 (Print)},
  doi       = {10.1016/j.snb.2024.135530},
  pages     = {12 Seiten},
  year      = {2024},
  abstract  = {Electrolyte-insulator-semiconductor capacitors (EISCAP) belong to field-effect sensors having an attractive transducer architecture for constructing various biochemical sensors. In this study, a capacitive model of enzyme-modified EISCAPs has been developed and the impact of the surface coverage of immobilized enzymes on its capacitance-voltage and constant-capacitance characteristics was studied theoretically and experimentally. The used multicell arrangement enables a multiplexed electrochemical characterization of up to sixteen EISCAPs. Different enzyme coverages have been achieved by means of parallel electrical connection of bare and enzyme-covered single EISCAPs in diverse combinations. As predicted by the model, with increasing the enzyme coverage, both the shift of capacitance-voltage curves and the amplitude of the constant-capacitance signal increase, resulting in an enhancement of analyte sensitivity of the EISCAP biosensor. In addition, the capability of the multicell arrangement with multi-enzyme covered EISCAPs for sequentially detecting multianalytes (penicillin and urea) utilizing the enzymes penicillinase and urease has been experimentally demonstrated and discussed.},
  language  = {en}
}
@article{MonakhovaDiehl2021,
  author    = {Monakhova, Yulia and Diehl, Bernd W.K.},
  title     = {Novel approach of qNMR workflow by standardization using 2H integral: Application to any intrinsic calibration standard},
  series = {Talanta},
  volume    = {222},
  journal   = {Talanta},
  number    = {Article number: 121504},
  publisher = {Elsevier},
  isbn      = {0039-9140},
  doi       = {10.1016/j.talanta.2020.121504},
  year      = {2021},
  abstract  = {Quantitative nuclear magnetic resonance (qNMR) is routinely performed by the internal or external standardization. The manuscript describes a simple alternative to these common workflows by using NMR signal of another active nuclei of calibration compound. For example, for any arbitrary compound quantification by NMR can be based on the use of an indirect concentration referencing that relies on a solvent having both 1H and 2H signals. To perform high-quality quantification, the deuteration level of the utilized deuterated solvent has to be estimated. In this contribution the new method was applied to the determination of deuteration levels in different deuterated solvents (MeOD, ACN, CDCl3, acetone, benzene, DMSO-d6). Isopropanol-d6, which contains a defined number of deuterons and protons, was used for standardization. Validation characteristics (precision, accuracy, robustness) were calculated and the results showed that the method can be used in routine practice. Uncertainty budget was also evaluated. In general, this novel approach, using standardization by 2H integral, benefits from reduced sample preparation steps and uncertainties, and can be applied in different application areas (purity determination, forensics, pharmaceutical analysis, etc.).},
  language  = {en}
}
@inproceedings{PaulsenHoffstadtKrafftetal.2020,
  author    = {Paulsen, Svea and Hoffstadt, Kevin and Krafft, Simone and Leite, A. and Zang, J. and Fonseca-Zang, W. and Kuperjans, Isabel},
  title     = {Continuous biogas production from sugarcane as sole substrate},
  series = {Energy Reports},
  volume    = {6},
  booktitle = {Energy Reports},
  number    = {Supplement 1},
  publisher = {Elsevier},
  doi       = {10.1016/j.egyr.2019.08.035},
  pages     = {153 -- 158},
  year      = {2020},
  abstract  = {A German-Brazilian research project investigates sugarcane as an energy plant in anaerobic digestion for biogas production. The aim of the project is a continuous, efficient, and stable biogas process with sugarcane as the substrate. Tests are carried out in a fermenter with a volume of 10 l. In order to optimize the space-time load to achieve a stable process, a continuous process in laboratory scale has been devised. The daily feed in quantity and the harvest time of the substrate sugarcane has been varied. Analyses of the digester content were conducted twice per week to monitor the process: The ratio of inorganic carbon content to volatile organic acid content (VFA/TAC), the concentration of short-chain fatty acids, the organic dry matter, the pH value, and the total nitrogen, phosphate, and ammonium concentrations were monitored. In addition, the gas quality (the percentages of CO₂, CH₄, and H₂) and the quantity of the produced gas were analyzed. The investigations have exhibited feasible and economical production of biogas in a continuous process with energy cane as substrate. With a daily feeding rate of 1.68gᵥₛ/l*d the average specific gas formation rate was 0.5 m3/kgᵥₛ. The long-term study demonstrates a surprisingly fast metabolism of short-chain fatty acids. This indicates a stable and less susceptible process compared to other substrates.},
  language  = {en}
}
@inproceedings{NethSchubaBrodkorbetal.2023,
  author    = {Neth, Jannik and Schuba, Marko and Brodkorb, Karsten and Neugebauer, Georg and H{\"o}ner, Tim and Hack, Sacha},
  title     = {Digital forensics triage app for android},
  series = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  booktitle = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  publisher = {ACM},
  isbn      = {9798400707728},
  doi       = {10.1145/3600160.3605017},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator - without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.},
  language  = {en}
}
@inproceedings{NeugebauerBrutschyMeyeretal.2014,
  author    = {Neugebauer, Georg and Brutschy, Lucas and Meyer, Ulrike and Wetzel, Susanne},
  title     = {Privacy-preserving multi-party reconciliation secure in the malicious model},
  series = {DPM 2013, SETOP 2013: Data Privacy Management and Autonomous Spontaneous Security},
  booktitle = {DPM 2013, SETOP 2013: Data Privacy Management and Autonomous Spontaneous Security},
  editor    = {Garcia-Alfaro, Joaquin and Lioudakis, Georgios and Cuppens-Boulahia, Nora and Foley, Simon and Fitzgerald, William M.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-54567-2 (Print)},
  doi       = {10.1007/978-3-642-54568-9_12},
  pages     = {178 -- 193},
  year      = {2014},
  abstract  = {The problem of fair and privacy-preserving ordered set reconciliation arises in a variety of applications like auctions, e-voting, and appointment reconciliation. While several multi-party protocols have been proposed that solve this problem in the semi-honest model, there are no multi-party protocols that are secure in the malicious model so far. In this paper, we close this gap. Our newly proposed protocols are shown to be secure in the malicious model based on a variety of novel non-interactive zero-knowledge-proofs. We describe the implementation of our protocols and evaluate their performance in comparison to protocols solving the problem in the semi-honest case.},
  language  = {en}
}
@article{MonakhovaDiehl2022,
  author    = {Monakhova, Yulia and Diehl, Bernd W.K.},
  title     = {Multinuclear NMR screening of pharmaceuticals using standardization by 2H integral of a deuterated solvent},
  series = {Journal of Pharmaceutical and Biomedical Analysis},
  volume    = {209},
  journal   = {Journal of Pharmaceutical and Biomedical Analysis},
  number    = {Article number: 114530},
  publisher = {Elsevier},
  isbn      = {0731-7085},
  doi       = {10.1016/j.jpba.2021.114530},
  year      = {2022},
  abstract  = {NMR standardization approach that uses the 2H integral of deuterated solvent for quantitative multinuclear analysis of pharmaceuticals is described. As a proof of principle, the existing NMR procedure for the analysis of heparin products according to US Pharmacopeia monograph is extended to the determination of Na+ and Cl- content in this matrix. Quantification is performed based on the ratio of a 23Na (35Cl) NMR integral and 2H NMR signal of deuterated solvent, D2O, acquired using the specific spectrometer hardware. As an alternative, the possibility of 133Cs standardization using the addition of Cs2CO3 stock solution is shown. Validation characteristics (linearity, repeatability, sensitivity) are evaluated. A holistic NMR profiling of heparin products can now also be used for the quantitative determination of inorganic compounds in a single analytical run using a single sample. In general, the new standardization methodology provides an appealing alternative for the NMR screening of inorganic and organic components in pharmaceutical products.},
  language  = {en}
}
@article{BlockMayWetzeletal.2023,
  author    = {Block, Franziska and May, Alexander and Wetzel, Katharina and Adels, Klaudia and Elbers, Gereon and Schulze, Margit and Monakhova, Yulia},
  title     = {What is the best spectroscopic method for simultaneous analysis of organic acids and (poly)saccharides in biological matrices: Example of Aloe vera extracts?},
  series = {Talanta Open},
  volume    = {7},
  journal   = {Talanta Open},
  number    = {Art. No. 100220},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2666-8319},
  doi       = {10.1016/j.talo.2023.100220},
  pages     = {1 -- 9},
  year      = {2023},
  abstract  = {Several species of (poly)saccharides and organic acids can be found often simultaneously in various biological matrices, e.g., fruits, plant materials, and biological fluids. The analysis of such matrices sometimes represents a challenging task. Using Aloe vera (A. vera) plant materials as an example, the performance of several spectro-scopic methods (80 MHz benchtop NMR, NIR, ATR-FTIR and UV-vis) for the simultaneous analysis of quality parameters of this plant material was compared. The determined parameters include (poly)saccharides such as aloverose, fructose and glucose as well as organic acids (malic, lactic, citric, isocitric, acetic, fumaric, benzoic and sorbic acids). 500 MHz NMR and high-performance liquid chromatography (HPLC) were used as the reference methods. UV-vis data can be used only for identification of added preservatives (benzoic and sorbic acids) and drying agent (maltodextrin) and semiquantitative analysis of malic acid. NIR and MIR spectroscopies combined with multivariate regression can deliver more informative overview of A. vera extracts being able to additionally quantify glucose, aloverose, citric, isocitric, malic, lactic acids and fructose. Low-field NMR measurements can be used for the quantification of aloverose, glucose, malic, lactic, acetic, and benzoic acids. The benchtop NMR method was successfully validated in terms of robustness, stability, precision, reproducibility and limit of detection (LOD) and quantification (LOQ), respectively. All spectroscopic techniques are useful for the screening of (poly)saccharides and organic acids in plant extracts and should be applied according to its availability as well as information and confidence required for the specific analytical goal. Benchtop NMR spectroscopy seems to be the most feasible solution for quality control of A. vera products.},
  language  = {en}
}
@article{MolinnusJanusFangetal.2022,
  author    = {Molinnus, Denise and Janus, Kevin Alexander and Fang, Anyelina C. and Drinic, Aleksander and Achtsnicht, Stefan and K{\"o}pf, Marius and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Thick-film carbon electrode deposited onto a biodegradable fibroin substrate for biosensing applications},
  series = {Physica status solidi (a)},
  volume    = {219},
  journal   = {Physica status solidi (a)},
  number    = {23},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.202200100},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {This study addresses a proof-of-concept experiment with a biocompatible screen-printed carbon electrode deposited onto a biocompatible and biodegradable substrate, which is made of fibroin, a protein derived from silk of the Bombyx mori silkworm. To demonstrate the sensor performance, the carbon electrode is functionalized as a glucose biosensor with the enzyme glucose oxidase and encapsulated with a silicone rubber to ensure biocompatibility of the contact wires. The carbon electrode is fabricated by means of thick-film technology including a curing step to solidify the carbon paste. The influence of the curing temperature and curing time on the electrode morphology is analyzed via scanning electron microscopy. The electrochemical characterization of the glucose biosensor is performed by amperometric/voltammetric measurements of different glucose concentrations in phosphate buffer. Herein, systematic studies at applied potentials from 500 to 1200 mV to the carbon working electrode (vs the Ag/AgCl reference electrode) allow to determine the optimal working potential. Additionally, the influence of the curing parameters on the glucose sensitivity is examined over a time period of up to 361 days. The sensor shows a negligible cross-sensitivity toward ascorbic acid, noradrenaline, and adrenaline. The developed biocompatible biosensor is highly promising for future in vivo and epidermal applications.},
  language  = {en}
}
@article{OezsoyluKizildagSchoeningetal.2020,
  author    = {{\"O}zsoylu, Dua and Kizildag, Sefa and Sch{\"o}ning, Michael Josef and Wagner, Torsten},
  title     = {Differential chemical imaging of extracellular acidification within microfluidic channels using a plasma-functionalized light-addressable potentiometric sensor (LAPS)},
  series = {Physics in Medicine},
  volume    = {10},
  journal   = {Physics in Medicine},
  number    = {100030},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2352-4510},
  doi       = {10.1016/j.phmed.2020.100030},
  pages     = {8},
  year      = {2020},
  abstract  = {Extracellular acidification is a basic indicator for alterations in two vital metabolic pathways: glycolysis and cellular respiration. Measuring these alterations by monitoring extracellular acidification using cell-based biosensors such as LAPS plays an important role in studying these pathways whose disorders are associated with numerous diseases including cancer. However, the surface of the biosensors must be specially tailored to ensure high cell compatibility so that cells can represent more in vivo-like behavior, which is critical to gain more realistic in vitro results from the analyses, e.g., drug discovery experiments. In this work, O2 plasma patterning on the LAPS surface is studied to enhance surface features of the sensor chip, e.g., wettability and biofunctionality. The surface treated with O2 plasma for 30 s exhibits enhanced cytocompatibility for adherent CHO-K1 cells, which promotes cell spreading and proliferation. The plasma-modified LAPS chip is then integrated into a microfluidic system, which provides two identical channels to facilitate differential measurements of the extracellular acidification of CHO-K1 cells. To the best of our knowledge, it is the first time that extracellular acidification within microfluidic channels is quantitatively visualized as differential (bio-)chemical images.},
  language  = {en}
}
@inproceedings{SildatkeKarwanniKraftetal.2020,
  author    = {Sildatke, Michael and Karwanni, Hendrik and Kraft, Bodo and Schmidts, Oliver and Z{\"u}ndorf, Albert},
  title     = {Automated Software Quality Monitoring in Research Collaboration Projects},
  series = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  booktitle = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.1145/3387940.3391478},
  pages     = {603 -- 610},
  year      = {2020},
  abstract  = {In collaborative research projects, both researchers and practitioners work together solving business-critical challenges. These projects often deal with ETL processes, in which humans extract information from non-machine-readable documents by hand. AI-based machine learning models can help to solve this problem. Since machine learning approaches are not deterministic, their quality of output may decrease over time. This fact leads to an overall quality loss of the application which embeds machine learning models. Hence, the software qualities in development and production may differ. Machine learning models are black boxes. That makes practitioners skeptical and increases the inhibition threshold for early productive use of research prototypes. Continuous monitoring of software quality in production offers an early response capability on quality loss and encourages the use of machine learning approaches. Furthermore, experts have to ensure that they integrate possible new inputs into the model training as quickly as possible. In this paper, we introduce an architecture pattern with a reference implementation that extends the concept of Metrics Driven Research Collaboration with an automated software quality monitoring in productive use and a possibility to auto-generate new test data coming from processed documents in production. Through automated monitoring of the software quality and auto-generated test data, this approach ensures that the software quality meets and keeps requested thresholds in productive use, even during further continuous deployment and changing input data.},
  language  = {en}
}
@article{EngelmannPourshahidiShalabyetal.2022,
  author    = {Engelmann, Ulrich M. and Pourshahidi, Mohammad Ali and Shalaby, Ahmed and Krause, Hans-Joachim},
  title     = {Probing particle size dependency of frequency mixing magnetic detection with dynamic relaxation simulation},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {563},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {In progress, Art. No. 169965},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2022.169965},
  year      = {2022},
  abstract  = {Biomedical applications of magnetic nanoparticles (MNP) fundamentally rely on the particles' magnetic relaxation as a response to an alternating magnetic field. The magnetic relaxation complexly depends on the interplay of MNP magnetic and physical properties with the applied field parameters. It is commonly accepted that particle core size is a major contributor to signal generation in all the above applications, however, most MNP samples comprise broad distribution spanning nm and more. Therefore, precise knowledge of the exact contribution of individual core sizes to signal generation is desired for optimal MNP design generally for each application. Specifically, we present a magnetic relaxation simulation-driven analysis of experimental frequency mixing magnetic detection (FMMD) for biosensing to quantify the contributions of individual core size fractions towards signal generation. Applying our method to two different experimental MNP systems, we found the most dominant contributions from approx. 20 nm sized particles in the two independent MNP systems. Additional comparison between freely suspended and immobilized MNP also reveals insight in the MNP microstructure, allowing to use FMMD for MNP characterization, as well as to further fine-tune its applicability in biosensing.},
  language  = {en}
}
@article{AchtsnichtToedterNiehuesetal.2019,
  author    = {Achtsnicht, Stefan and T{\"o}dter, Julia and Niehues, Julia and Tel{\"o}ken, Matthias and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim and Schr{\"o}per, Florian},
  title     = {3D printed modular immunofiltration columns for frequency mixing-based multiplex magnetic immunodetection},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19010148},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {For performing point-of-care molecular diagnostics, magnetic immunoassays constitute a promising alternative to established enzyme-linked immunosorbent assays (ELISA) because they are fast, robust and sensitive. Simultaneous detection of multiple biomolecular targets from one body fluid sample is desired. The aim of this work is to show that multiplex magnetic immunodetection based on magnetic frequency mixing by means of modular immunofiltration columns prepared for different targets is feasible. By calculations of the magnetic response signal, the required spacing between the modules was determined. Immunofiltration columns were manufactured by 3D printing and antibody immobilization was performed in a batch approach. It was shown experimentally that two different target molecules in a sample solution could be individually detected in a single assaying step with magnetic measurements of the corresponding immobilization filters. The arrangement order of the filters and of a negative control did not influence the results. Thus, a simple and reliable approach to multi-target magnetic immunodetection was demonstrated.},
  language  = {en}
}
@misc{Buechel2022,
  type      = {Master Thesis},
  author    = {B{\"u}chel, Carolin},
  title     = {GYMLET : dein mobiles Freiluftstudio - Entwicklung eines serientauglichen Prototypen und einer Vermarktungsstrategie},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {93 Seiten},
  year      = {2022},
  abstract  = {Sportvereine verlieren zunehmend Mitglieder. Grund daf{\"u}r ist der wachsende Wunsch nach unabh{\"a}ngigen Trainingsm{\"o}glichkeiten. GYMLET bietet den Sportler:innen die M{\"o}glichkeit, ihre Fitness funktional, selbstorganisiert und unabh{\"a}ngig zu trainieren. Dabei kann durch den selbstbestimmten Trainingsort neben der k{\"o}rperlichen Fitness vor allem die Motivation zur sportlichen Aktivit{\"a}t und das Wohlbefinden gesteigert werden. Unterst{\"u}tzt wird das Trainingssystem durch eine App, welche den Sportler:innen neben Nutzungsm{\"o}glichkeiten als Coach und Trainingsplaner dient. Um diese Trainingsm{\"o}glichkeit an die Zielgruppe heranzutragen, ist eine Kampagnenstrategie aus zwei Phasen entstanden. In dieser sollen Postings und Clips {\"u}ber Instagram und Youtube ver{\"o}ffentlicht werden. Zus{\"a}tzlich werden Zeitschriften und m{\"o}gliche Kooperationen mit Therapeuten oder Freizeitunterk{\"u}nften zur Ver{\"o}ffentlichung der Kampagne genutzt.},
  language  = {de}
}
@article{HeuermannSadeghfam2009,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Enhanced system architecture for rugged wide band data transmission / Sadeghfam, A. ; Heuermann, H.},
  series = {European Radar Conference, 2009 : EuRAD 2009 ; Sept. 30 - Oct. 2 2009, Rome, Italy ; part of the European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association},
  journal   = {European Radar Conference, 2009 : EuRAD 2009 ; Sept. 30 - Oct. 2 2009, Rome, Italy ; part of the European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-2-87487-014-9},
  pages     = {347 -- 350},
  year      = {2009},
  language  = {en}
}
@book{KrauseUlkeMartinetal.2019,
  author    = {Krause, Thomas and Ulke, Bernd and Martin, Joachim and Lemke, J{\"o}rg and Sparla, Peter and Streit, Wilfried},
  title     = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb: Klausurvorbereitung mit ausf{\"u}hrlichen L{\"o}sungen},
  editor    = {Krause, Thomas and Ulke, Bernd},
  edition   = {3. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23126-2 (Print) 978-3-658-23127-9 (Online)},
  pages     = {XI, 347 Seiten ; Illustrationen},
  year      = {2019},
  language  = {de}
}
@article{AdelsElbersDiehletal.2023,
  author    = {Adels, Klaudia and Elbers, Gereon and Diehl, Bernd and Monakhova, Yulia},
  title     = {Multicomponent analysis of dietary supplements containing glucosamine and chondroitin: comparative low- and high-field NMR spectroscopic study},
  series = {Analytical Sciences},
  volume    = {2023},
  journal   = {Analytical Sciences},
  publisher = {Springer Verlag},
  address   = {Cham},
  issn      = {1348-2246 (Online)},
  doi       = {10.1007/s44211-023-00433-2},
  pages     = {13 Seiten},
  year      = {2023},
  abstract  = {With the prevalence of glucosamine- and chondroitin-containing dietary supplements for people with osteoarthritis in the marketplace, it is important to have an accurate and reproducible analytical method for the quantitation of these compounds in finished products. NMR spectroscopic method based both on low- (80 MHz) and high- (500-600 MHz) field NMR instrumentation was established, compared and validated for the determination of chondroitin sulfate and glucosamine in dietary supplements. The proposed method was applied for analysis of 20 different dietary supplements. In the majority of cases, quantification results obtained on the low-field NMR spectrometer are similar to those obtained with high-field 500-600 MHz NMR devices. Validation results in terms of accuracy, precision, reproducibility, limit of detection and recovery demonstrated that the developed method is fit for purpose for the marketed products. The NMR method was extended to the analysis of methylsulfonylmethane, adulterant maltodextrin, acetate and inorganic ions. Low-field NMR can be a quicker and cheaper alternative to more expensive high-field NMR measurements for quality control of the investigated dietary supplements. High-field NMR instrumentation can be more favorable for samples with complex composition due to better resolution, simultaneously giving the possibility of analysis of inorganic species such as potassium and chloride.},
  language  = {en}
}
@masterthesis{Victoria2022,
  type      = {Bachelor Thesis},
  author    = {Victoria, Jacqueline},
  title     = {IN BETWEEN : An attempt to capture emotions},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {83 Seiten},
  year      = {2022},
  abstract  = {Emotionen durchlebt jeder Mensch. Von unserer Geburt bis zu unserem Tod. Der Psychologe Paul Eckman hat sechs grundlegende Emotionen identifiziert. Gl{\"u}ck, Traurigkeit, Ekel, Angst, {\"U}berraschung und Wut. Emotionen k{\"o}nnen in positive und negative, aber auch in die weniger beachtete neutrale Emotion unterteilt werden. Emotionen werden st{\"a}ndig und wechselnd erlebt und sind deshalb vorstellbar als "Spektrum" oder als "Unendlichkeitschleife". Wie Menschen Emotionen erfahren, ist unterschiedlich. Sie sind abstrakt. Das Fotobuch "In Between" will das Emotionsspektrum und das Abstrakte mithilfe einer Kurzgeschichte sichtbar machen. Das Editorial und die fotografische Gestaltung greifen das Konzept der endlosen Schleife unserer Gef{\"u}hlswelt auf und machen sie erlebbar.},
  language  = {de}
}
@masterthesis{Frank2022,
  type      = {Bachelor Thesis},
  author    = {Frank, Jemima Leonie},
  title     = {Falling in love with the female gaze},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {81 Seiten},
  year      = {2022},
  abstract  = {Der „Male Gaze" bezeichnet das typische Erleben der Umwelt aus m{\"a}nnlicher Perspektive und pr{\"a}gt in den sogenannten Mainstream-Medien die Gestaltung von Film, Fernsehen und Werbung. Dadurch werden von dargestellten Personen h{\"a}ufig die k{\"o}rperlichen Aspekte hervorgehoben. Im Gegensatz dazu gilt das weibliche Pendant, der „Female Gaze", als besonders emotionsbetont. Weil Medien einen enormen Einfluss auf gesellschaftliches und individuelles Denken haben, stellt die Dominanz des „Male Gaze" eine Unausgeglichenheit dar, die sich in verschiedenen Bereichen des gesellschaftlichen Lebens widerspiegelt. Deswegen m{\"o}chte dieses Projekt die Medien um die weibliche Sichtweise erweitern und damit die dort transportierten Bilder diverser und ausgewogener machen. Die Fotografie fokussiert sich dabei auf die Gef{\"u}hlswelt der Protagonistin, womit die Betrachter:Innen schrittweise in ihre Position hineinversetzt werden sollen. Mit Augen des Mitgef{\"u}hls und eigenem Sch{\"o}nheitsbegriff l{\"a}sst „Falling in love with the female gaze" endlich auch die Frau zu Wort kommen.},
  language  = {de}
}