@article{NguyenDuongTranetal.2012,
  author    = {Nguyen, Nhu Huynh and Duong, Minh Tuan and Tran, Thanh Ngoc and Pham, Phu Tinh and Grottke, O. and Tolba, R. and Staat, Manfred},
  title     = {Influence of a freeze-thaw cycle on the stress-stretch curves of tissues of porcine abdominal organs},
  series = {Journal of Biomechanics},
  volume    = {45},
  journal   = {Journal of Biomechanics},
  number    = {14},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380},
  doi       = {10.1016/j.jbiomech.2012.07.008},
  pages     = {2382 -- 2386},
  year      = {2012},
  abstract  = {The paper investigates both fresh porcine spleen and liver and the possible decomposition of these organs under a freeze-thaw cycle. The effect of tissue preservation condition is an important factor which should be taken into account for protracted biomechanical tests. In this work, tension tests were conducted for a large number of tissue specimens from twenty pigs divided into two groups of 10. Concretely, the first group was tested in fresh state; the other one was tested after a freeze-thaw cycle which simulates the conservation conditions before biomechanical experiments. A modified Fung model for isotropic behavior was adopted for the curve fitting of each kind of tissues. Experimental results show strong effects of the realistic freeze-thaw cycle on the capsule of elastin-rich spleen but negligible effects on the liver which virtually contains no elastin. This different behavior could be explained by the autolysis of elastin by elastolytic enzymes during the warmer period after thawing. Realistic biomechanical properties of elastin-rich organs can only be expected if really fresh tissue is tested. The observations are supported by tests of intestines.},
  language  = {en}
}
@article{StaatTrenzLohmannetal.2012,
  author    = {Staat, Manfred and Trenz, Eva and Lohmann, Philipp and Frotscher, Ralf and Klinge, Uwe and Tabaza, Ruth and Kirschner-Hermanns, Ruth},
  title     = {New measurements to compare soft tissue anchoring systems in pelvic floor surgery},
  series = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  volume    = {100B},
  journal   = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  number    = {4},
  publisher = {Wiley},
  address   = {Hoboken, NJ},
  issn      = {1552-4981},
  doi       = {10.1002/jbm.b.32654},
  pages     = {924 -- 933},
  year      = {2012},
  abstract  = {Suburethral slings as well as different meshes are widely used treating stress urinary incontinence and prolaps in women. With the development of MiniSlings and special meshes using less alloplastic material anchorage systems become more important to keep devices in place and to put some tension especially on the MiniSlings. To date, there are many different systems of MiniSlings of different companies on the market which differ in the structure of the used meshes and anchors. A new objective measurement method to compare different properties of MiniSling systems (mesh and anchor) is presented in this article. Ballistic gelatine acts as soft tissue surrogate. Significant differences in parameters like pull-out strength of anchors or shrinkage of meshes under loading conditions have been determined. The form and size of the anchors as well as the structural stability of the meshes are decisive for a proper integration. The tested anchorings sytems showed markedly different mechanical function at their respective load bearing capacity. As the stable fixation of the device in tissue is a prerequisite for a permanet reinforcement, the proposed test system permits further optimisation of anchor and mesh devices to improve the success of the surgical treatment},
  language  = {en}
}
@article{KonstantinidisFloresMartinezDachwaldetal.2015,
  author    = {Konstantinidis, Konstantinos and Flores Martinez, Claudio and Dachwald, Bernd and Ohndorf, Andreas and Dykta, Paul and Bowitz, Pascal and Rudolph, Martin and Digel, Ilya and Kowalski, Julia and Voigt, Konstantin and F{\"o}rstner, Roger},
  title     = {A lander mission to probe subglacial water on Saturn's moon enceladus for life},
  series = {Acta astronautica},
  volume    = {Vol. 106},
  journal   = {Acta astronautica},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2030 (E-Journal); 0094-5765 (Print)},
  pages     = {63 -- 89},
  year      = {2015},
  language  = {en}
}
@inproceedings{TranStaatStavroulakis2014,
  author    = {Tran, Ngoc Trinh and Staat, Manfred and Stavroulakis, G. E.},
  title     = {A multicriteria method for truss optimization},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@article{NovacekTranKlingeetal.2012,
  author    = {Novacek, V. and Tran, Thanh Ngoc and Klinge, U. and Tolba, R. H. and Staat, Manfred and Bronson, D. G. and Miesse, A. M. and Whiffen, J. and Turquier, F.},
  title     = {Finite element modelling of stapled colorectal end-to-end anastomosis : Advantages of variable height stapler design},
  series = {Journal of Biomechanics},
  volume    = {45},
  journal   = {Journal of Biomechanics},
  number    = {115},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380},
  doi       = {10.1016/j.jbiomech.2012.07.021},
  pages     = {2693 -- 2697},
  year      = {2012},
  abstract  = {The impact of surgical staplers on tissues has been studied mostly in an empirical manner. In this paper, finite element method was used to clarify the mechanics of tissue stapling and associated phenomena. Various stapling modalities and several designs of circular staplers were investigated to evaluate the impact of the device on tissues and mechanical performance of the end-to-end colorectal anastomosis. Numerical simulations demonstrated that a single row of staples is not adequate to resist leakage due to non-linear buckling and opening of the tissue layers between two adjacent staples. Compared to the single staple row configuration, significant increase in stress experienced by the tissue at the inner staple rows was observed in two and three rows designs. On the other hand, adding second and/or third staple row had no effect on strain in the tissue inside the staples. Variable height design with higher staples in outer rows significantly reduced the stresses and strains in outer rows when compared to the same configuration with flat cartridge.},
  language  = {en}
}
@article{Staat2005,
  author    = {Staat, Manfred},
  title     = {Direct finite element route for design-by-analysis of pressure components},
  year      = {2005},
  abstract  = {In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{HacklWegmannKahmannetal.2017,
  author    = {Hackl, Michael and Wegmann, Kilian and Kahmann, Stephanie Lucina and Heinze, Nicolai and Staat, Manfred and Neiss, Wolfram F. and Scaal, Martin and M{\"u}ller, Lars P.},
  title     = {Radial shortening osteotomy reduces radiocapitellar contact pressures while preserving valgus stability of the elbow},
  series = {Knee Surgery, Sports Traumatology, Arthroscopy},
  volume    = {25},
  journal   = {Knee Surgery, Sports Traumatology, Arthroscopy},
  number    = {7},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1433-7347},
  doi       = {10.1007/s00167-017-4468-z},
  pages     = {2280 -- 2288},
  year      = {2017},
  language  = {en}
}
@inproceedings{PirovanoSeefeldtDachwaldetal.2015,
  author    = {Pirovano, Laura and Seefeldt, Patric and Dachwald, Bernd and Noomen, Ron},
  title     = {Attitude and Orbital Dynamics Modeling for an Uncontrolled Solar-Sail Experiment in Low-Earth Orbit},
  series = {25th International Symposium on Spaceflight Dynamics, 2015, Munich, Germany},
  booktitle = {25th International Symposium on Spaceflight Dynamics, 2015, Munich, Germany},
  pages     = {15 S.},
  year      = {2015},
  language  = {en}
}
@article{StaatHeitzer2003,
  author    = {Staat, Manfred and Heitzer, M.},
  title     = {Probabilistic limit and shakedown problems},
  series = {Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M; Heitzer, M.},
  journal   = {Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M; Heitzer, M.},
  publisher = {John von Neumann Institute for Computing (NIC)},
  address   = {J{\"u}lich},
  isbn      = {3-00-010001-6},
  pages     = {217 -- 268},
  year      = {2003},
  language  = {en}
}
@article{DachwaldUlamecPostbergetal.2020,
  author    = {Dachwald, Bernd and Ulamec, Stephan and Postberg, Frank and Sohl, Frank and Vera, Jean-Pierre de and Christoph, Waldmann and Lorenz, Ralph D. and Hellard, Hugo and Biele, Jens and Rettberg, Petra},
  title     = {Key technologies and instrumentation for subsurface exploration of ocean worlds},
  series = {Space Science Reviews},
  volume    = {216},
  journal   = {Space Science Reviews},
  number    = {Art. 83},
  publisher = {Springer},
  address   = {Dordrecht},
  issn      = {1572-9672},
  doi       = {10.1007/s11214-020-00707-5},
  pages     = {45},
  year      = {2020},
  abstract  = {In this chapter, the key technologies and the instrumentation required for the subsurface exploration of ocean worlds are discussed. The focus is laid on Jupiter's moon Europa and Saturn's moon Enceladus because they have the highest potential for such missions in the near future. The exploration of their oceans requires landing on the surface, penetrating the thick ice shell with an ice-penetrating probe, and probably diving with an underwater vehicle through dozens of kilometers of water to the ocean floor, to have the chance to find life, if it exists. Technologically, such missions are extremely challenging. The required key technologies include power generation, communications, pressure resistance, radiation hardness, corrosion protection, navigation, miniaturization, autonomy, and sterilization and cleaning. Simpler mission concepts involve impactors and penetrators or - in the case of Enceladus - plume-fly-through missions.},
  language  = {en}
}
@inproceedings{FrotscherGossmannTemizArtmannetal.2013,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {1st International Conference "Shell and Membrane Theories in Mechanics and Biology: From Macro- to Nanoscale Structures", Minsk, Belarus, Sept. 16-20, 2013},
  booktitle = {1st International Conference "Shell and Membrane Theories in Mechanics and Biology: From Macro- to Nanoscale Structures", Minsk, Belarus, Sept. 16-20, 2013},
  publisher = {Verl. d. Weißruss. Staatl. Univ.},
  address   = {Minsk},
  organization    = {International Conference Shell and Membrane Theories in Mechanics and Biology: From Macro- to Nanoscale Structures <1, 2013, Minsk>},
  isbn      = {978-985-553-135-8},
  pages     = {165 -- 167},
  year      = {2013},
  language  = {en}
}
@inproceedings{TranPhamStaat2008,
  author    = {Tran, Thanh Ngoc and Pham, Phu Tinh and Staat, Manfred},
  title     = {Reliability analysis of shells based on direct plasticity methods},
  year      = {2008},
  abstract  = {Abstracts der CD-Rom Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) 30.06. - 04.07.2008 Venedig, Italien. 2 Seiten Zusammenfassung der Autoren mit graph. Darst. und Literaturverzeichnis},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{HacklKahmannWegmannetal.2016,
  author    = {Hackl, Michael and Kahmann, Stephanie Lucina and Wegmann, Kilian and Ries, Christian and Staat, Manfred and M{\"u}ller, Lars-Peter},
  title     = {Shortening osteotomy of the proximal radius — a treatment option for isolated osteoarthritis of the lateral column of the elbow joint?},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {128 -- 129},
  year      = {2016},
  abstract  = {Treatment of posttraumatic osteoarthritis of the radial column of the elbow joint remains a challenging yet common issue. While partial joint replacement leads to high revision rates, radial head excision has shown to severely increase joint instability. Shortening osteotomy of the radius could be an option to decrease the contact pressure of the radiohumeral joint and thereby pain levels without causing valgus instability. Hence, the aim of this biomechanical study was to evaluate the effects of radial shortening on axial load distribution and valgus stability of the elbow joint.},
  language  = {en}
}
@incollection{DigelAkimbekovKistaubayevaetal.2018,
  author    = {Digel, Ilya and Akimbekov, Nuraly S. and Kistaubayeva, Aida and Zhubanova, Azhar A.},
  title     = {Microbial Sampling from Dry Surfaces: Current Challenges and Solutions},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_19},
  pages     = {421 -- 456},
  year      = {2018},
  abstract  = {Sampling of dry surfaces for microorganisms is a main component of microbiological safety and is of critical importance in many fields including epidemiology, astrobiology as well as numerous branches of medical and food manufacturing. Aspects of biofilm formation, analysis and removal in aqueous solutions have been thoroughly discussed in literature. In contrast, microbial communities on air-exposed (dry) surfaces have received significantly less attention. Diverse surface sampling methods have been developed in order to address various surfaces and microbial groups, but they notoriously show poor repeatability, low recovery rates and suffer from lack of mutual consistency. Quantitative sampling for viable microorganisms represents a particular challenge, especially on porous and irregular surfaces. Therefore, it is essential to examine in depth the factors involved in microorganisms' recovery efficiency and accuracy depending on the sampling technique used. Microbial colonization, retention and community composition on different dry surfaces are very complex and rely on numerous physicochemical and biological factors. This study is devoted to analyze and review the (a) physical phenomena and intermolecular forces relevant for microbiological surface sampling; (b) challenges and problems faced by existing sampling methods for viable microorganisms and (c) current directions of engineering and research aimed at improvement of quality and efficiency of microbiological surface sampling.},
  language  = {en}
}
@inproceedings{FrotscherKochRaatschenetal.2014,
  author    = {Frotscher, Ralf and Koch, Jan-Peter and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {Evaluation of a computational model for drug action on cardiac tissue},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{JeanPierrePBaqueBillietal.2018,
  author    = {Jean-Pierre P., de Vera and Baque, Mickael and Billi, Daniela and B{\"o}ttger, Ute and Bulat, Sergey and Czupalla, Markus and Dachwald, Bernd and de la Torre, Rosa and Elsaesser, Andreas and Foucher, Fr{\´e}d{\´e}ric and Korsitzky, Hartmut and Kozyrovska, Natalia and L{\"a}ufer, Andreas and Moeller, Ralf and Olsson-Francis, Karen and Onofri, Silvano and Sommer, Stefan and Wagner, Dirk and Westall, Frances},
  title     = {The search for life on Mars and in the Solar System - strategies, logistics and infrastructures},
  series = {69th International Astronautical Congress (IAC)},
  booktitle = {69th International Astronautical Congress (IAC)},
  pages     = {1 -- 8},
  year      = {2018},
  abstract  = {The question "Are we alone in the Universe?" is perhaps the most fundamental one that affects mankind. How can we address the search for life in our Solar System? Mars, Enceladus and Europa are the focus of the search for life outside the terrestrial biosphere. While it is more likely to find remnants of life (fossils of extinct life) on Mars because of its past short time window of the surface habitability, it is probably more likely to find traces of extant life on the icy moons and ocean worlds of Jupiter and Saturn. Nevertheless, even on Mars there could still be a chance to find extant life in niches near to the surface or in just discovered subglacial lakes beneath the South Pole ice cap. Here, the different approaches for the detection of traces of life in the form of biosignatures including pre-biotic molecules will be presented. We will outline the required infrastructure for this enterprise and give examples of future mission concepts to investigate the presence of life on other planets and moons. Finally, we will provide suggestions on methods, techniques, operations and strategies for preparation and realization of future life detection missions.},
  language  = {en}
}
@article{Staat2002,
  author    = {Staat, Manfred},
  title     = {Some Achievements of the European Project LISA for FEM Based Limit and Shakedown Analysis},
  series = {Computational mechanics : developments and applications, 2002 : presented at the 2002 ASME Pressure Vessels and Piping Conference, Vancouver, British Columbia, Canada, August 5 - 9. / Badie, N. [ed]},
  journal   = {Computational mechanics : developments and applications, 2002 : presented at the 2002 ASME Pressure Vessels and Piping Conference, Vancouver, British Columbia, Canada, August 5 - 9. / Badie, N. [ed]},
  publisher = {American Society of Mechanical Engineers},
  address   = {New York},
  isbn      = {0791846520},
  pages     = {177 -- 185},
  year      = {2002},
  language  = {en}
}
@article{StaatHeitzerReinersetal.2003,
  author    = {Staat, Manfred and Heitzer, M. and Reiners, H. and Schubert, F.},
  title     = {Shakedown and ratchetting under tension-torsion loadings: analysis and experiments},
  series = {Nuclear Engineering and Design. 225 (2003), H. 1},
  journal   = {Nuclear Engineering and Design. 225 (2003), H. 1},
  isbn      = {0029-5493},
  pages     = {11 -- 26},
  year      = {2003},
  language  = {en}
}
@incollection{StaatHeitzer2003,
  author    = {Staat, Manfred and Heitzer, M.},
  title     = {Basis reduction technique for limit and shakedown problems},
  series = {Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M.; Heitzer, M.},
  booktitle = {Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M.; Heitzer, M.},
  publisher = {John von Neumann Institute for Computing (NIC)},
  address   = {J{\"u}lich},
  isbn      = {3-00-010001-6},
  url       = {http://nbn-resolving.de/urn:nbn:de:0001-2018112115},
  pages     = {1 -- 55},
  year      = {2003},
  language  = {en}
}
@article{DachwaldWi2007,
  author    = {Dachwald, Bernd and Wi, Bong},
  title     = {Solar Sail Kinetic Energy Impactor Trajectory Optimization for an Asteroid-Deflection Mission},
  series = {Journal of Spacecraft and Rockets. 44 (2007), H. 4},
  journal   = {Journal of Spacecraft and Rockets. 44 (2007), H. 4},
  isbn      = {0022-4650},
  pages     = {755 -- 764},
  year      = {2007},
  language  = {en}
}
@article{Dachwald2004,
  author    = {Dachwald, Bernd},
  title     = {Minimum Transfer Times for Nonperfectly Reflecting Solar Sailcraft},
  series = {Journal of Spacecraft and Rockets. 41 (2004), H. 4},
  journal   = {Journal of Spacecraft and Rockets. 41 (2004), H. 4},
  isbn      = {0022-4650},
  pages     = {693 -- 695},
  year      = {2004},
  language  = {en}
}
@article{EschweilerLaackStaat2007,
  author    = {Eschweiler, J. and Laack, Walter van and Staat, Manfred},
  title     = {Elektromyographische Untersuchungen zur Kr{\"a}ftigung der Oberschenkelmuskulatur mit einem myoelektrischen Stimulator nach arthroskopischen Eingriffen am Kniegelenk},
  series = {Orthop{\"a}dische Praxis. 43 (2007), H. 10},
  journal   = {Orthop{\"a}dische Praxis. 43 (2007), H. 10},
  isbn      = {0030-588x},
  pages     = {539 -- 542},
  year      = {2007},
  language  = {de}
}
@article{MeyerGaalenLeschingeretal.2019,
  author    = {Meyer, Carolin and Gaalen, Kerstin van and Leschinger, Tim and Scheyerer, Max J. and Neiss, Wolfram F. and Staat, Manfred and M{\"u}ller, Lars P. and Wegmann, Kilian},
  title     = {Kyphoplasty of Osteoporotic Fractured Vertebrae: A Finite Element Analysis about Two Types of Cement},
  series = {BioMed Research International},
  journal   = {BioMed Research International},
  doi       = {10.1155/2019/9232813},
  pages     = {Article ID 9232813},
  year      = {2019},
  language  = {en}
}
@article{StadlerDigelArtmannetal.2008,
  author    = {Stadler, A. M. and Digel, Ilya and Artmann, Gerhard and Embs, Jan P. and Zaccai, Joe and B{\"u}ldt, Georg},
  title     = {Hemoglobin Dynamics in Red Blood Cells: Correlation to Body Temperature},
  series = {Biophysical Journal. 95 (2008), H. 11},
  journal   = {Biophysical Journal. 95 (2008), H. 11},
  isbn      = {1542-0086},
  pages     = {5449 -- 5461},
  year      = {2008},
  language  = {en}
}
@article{Dachwald2004,
  author    = {Dachwald, Bernd},
  title     = {Optimization of Interplanetary Solar Sailcraft Trajectories Using Evolutionary Neurocontrol},
  series = {Journal of guidance, control, and dynamics. 27 (2004), H. 1},
  journal   = {Journal of guidance, control, and dynamics. 27 (2004), H. 1},
  isbn      = {0162-3192},
  pages     = {66 -- 72},
  year      = {2004},
  language  = {en}
}
@inproceedings{BhattaraiFrotscherSoraetal.2014,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Sora, M.-C. and Staat, Manfred},
  title     = {A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@article{DachwaldOhndorfGill2009,
  author    = {Dachwald, Bernd and Ohndorf, A. and Gill, E.},
  title     = {Optimization of low-thrust Earth-Moon transfers using evolutionary neurocontrol / Ohndorf, A. ; Dachwald, B. ; Gill, E.},
  series = {IEEE Congress on Evolutionary Computation, 2009. CEC '09.},
  journal   = {IEEE Congress on Evolutionary Computation, 2009. CEC '09.},
  isbn      = {978-1-4244-2958-5},
  pages     = {358 -- 364},
  year      = {2009},
  language  = {en}
}
@article{TranKreissigStaat2009,
  author    = {Tran, Thanh Ngoc and Kreißig, R. and Staat, Manfred},
  title     = {Probabilistic limit and shakedown analysis of thin plates and shells},
  series = {Structural safety. 31 (2009), H. 1},
  journal   = {Structural safety. 31 (2009), H. 1},
  publisher = {-},
  isbn      = {0167-4730},
  pages     = {1 -- 18},
  year      = {2009},
  language  = {en}
}
@article{MansurovDigelBiisenbaevetal.2012,
  author    = {Mansurov, Z. and Digel, Ilya and Biisenbaev, M. and Savistkaya, I. and Kistaubaeva, A. and Akimbekov, Nuraly S. and Zhubanova, A.},
  title     = {Bio-composite material on the basis of carbonized rice husk in biomedicine and environmental applications},
  series = {Eurasian Chemico-Technological Journal},
  volume    = {14},
  journal   = {Eurasian Chemico-Technological Journal},
  number    = {2},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  issn      = {2522-4867},
  doi       = {10.18321/ectj105},
  pages     = {115 -- 131},
  year      = {2012},
  language  = {en}
}
@article{ScholzRomagnoliDachwaldetal.2011,
  author    = {Scholz, Christina and Romagnoli, Daniele and Dachwald, Bernd and Theil, Stephan},
  title     = {Performance analysis of an attitude control system for solar sails using sliding masses},
  series = {Advances in Space Research},
  volume    = {48},
  journal   = {Advances in Space Research},
  number    = {11},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  pages     = {1822 -- 1835},
  year      = {2011},
  language  = {en}
}
@article{LeipoldFichtnerHeberetal.2006,
  author    = {Leipold, M. and Fichtner, H. and Heber, B. and Groepper, P. and Lascar, S. and Burger, F. and Eiden, M. and Niederstadt, T. and Sickinger, C. and Herbeck, L. and Dachwald, Bernd and Seboldt, Wolfgang},
  title     = {Heliopause Explorer - A Sailcraft Mission to the Outer Boundaries of the Solar System},
  series = {Acta Astronautica. 59 (2006), H. 8-11},
  journal   = {Acta Astronautica. 59 (2006), H. 8-11},
  isbn      = {0094-5765},
  pages     = {786 -- 796},
  year      = {2006},
  language  = {en}
}
@article{DachwaldTuryshevDittusetal.2005,
  author    = {Dachwald, Bernd and Turyshev, Slava G. and Dittus, H. and Shao, M. [u.a.]},
  title     = {Fundamental Physics with the Laser Astrometric Test Of Relativity / S.G. Turyshev ; H. Dittus ; M. Shao ... B.Dachwald ...},
  series = {Proceedings of the 39th ESLAB Symposium "Trends in Space Science and Cosmic Vision 2020" : 19 - 21 April 2005, ESTEC, Noordwijk, the Netherlands / European Space Agency. [Comp. by: F. Favata ...] . - (ESA SP ; 588)},
  journal   = {Proceedings of the 39th ESLAB Symposium "Trends in Space Science and Cosmic Vision 2020" : 19 - 21 April 2005, ESTEC, Noordwijk, the Netherlands / European Space Agency. [Comp. by: F. Favata ...] . - (ESA SP ; 588)},
  publisher = {ESA Publ. Div.},
  address   = {Noordwijk},
  isbn      = {9290928999},
  pages     = {8 -- 11},
  year      = {2005},
  language  = {en}
}
@article{DittusTuryshevDachwaldetal.2005,
  author    = {Dittus, H. and Turyshev, S. G. and Dachwald, Bernd and Blome, Hans-Joachim},
  title     = {A Mission to Explore the Pioneer Anomaly},
  series = {Proceedings of the 39th ESLAB Symposium "Trends in Space Science and Cosmic Vision 2020" : 19 - 21 April 2005, ESTEC, Noordwijk, the Netherlands / European Space Agency. [Comp. by: F. Favata ...] . - (ESA SP ; 588)},
  journal   = {Proceedings of the 39th ESLAB Symposium "Trends in Space Science and Cosmic Vision 2020" : 19 - 21 April 2005, ESTEC, Noordwijk, the Netherlands / European Space Agency. [Comp. by: F. Favata ...] . - (ESA SP ; 588)},
  publisher = {ESA Publ. Div.},
  address   = {Noordwijk},
  isbn      = {9290928999},
  pages     = {3 -- 10},
  year      = {2005},
  language  = {en}
}
@article{DachwaldMacDonaldMcInnes2007,
  author    = {Dachwald, Bernd and MacDonald, Malcolm and McInnes, Colin R.},
  title     = {Heliocentric Solar Sail Orbit Transfers with Locally Optimal Control Laws / Malcolm Macdonald ; Colin McInnes ; Bernd Dachwald},
  series = {Journal of Spacecraft and Rockets. 44 (2007), H. 1},
  journal   = {Journal of Spacecraft and Rockets. 44 (2007), H. 1},
  isbn      = {0022-4650},
  pages     = {273 -- 276},
  year      = {2007},
  language  = {en}
}
@article{DachwaldSeboldt2005,
  author    = {Dachwald, Bernd and Seboldt, Wolfgang},
  title     = {Solar Sails for Near- and Medium-Term Scientific Deep Space Missions / W. Sebolt ; B. Dachwald},
  series = {In-space propulsion : edited book of proceedings of the 10-IWCP, the 10th International Workshop on Combustion and Propulsion held in Lerici, La Spezia, Italy, 21-25 September 2003 / [ed.: Luigi T. DeLuca]},
  journal   = {In-space propulsion : edited book of proceedings of the 10-IWCP, the 10th International Workshop on Combustion and Propulsion held in Lerici, La Spezia, Italy, 21-25 September 2003 / [ed.: Luigi T. DeLuca]},
  publisher = {SP Lab, Politecnico di Milano},
  address   = {Milano},
  pages     = {getr. Z{\"a}hlung . Ill.},
  year      = {2005},
  language  = {en}
}
@article{DachwaldCarnelliVasile2006,
  author    = {Dachwald, Bernd and Carnelli, I. and Vasile, M.},
  title     = {Evolutionary Neurocontrol as a Novel Method for Low-Thrust Gravity Assist Trajectory Optimization / I. Carnelli ; B. Dachwald ; M. Vasile},
  series = {Proceedings of the Twenty-Fifth International Symposium on Space Technology and Science (Selected papers) : Kanazawa, [June 4 through June 11, 2006, at Kanazawa-shi Kanko Kaikan in Kanazawa city] / [Japan Society for Aeronautical and Space Sciences. Kohtaro Matsumoto [ed.-in-chief]},
  journal   = {Proceedings of the Twenty-Fifth International Symposium on Space Technology and Science (Selected papers) : Kanazawa, [June 4 through June 11, 2006, at Kanazawa-shi Kanko Kaikan in Kanazawa city] / [Japan Society for Aeronautical and Space Sciences. Kohtaro Matsumoto [ed.-in-chief]},
  publisher = {JSASS},
  address   = {Tokyo},
  isbn      = {4-99005-002-9},
  pages     = {569 -- 574},
  year      = {2006},
  language  = {en}
}
@article{DachwaldCarnelliVasile2006,
  author    = {Dachwald, Bernd and Carnelli, I. and Vasile, M.},
  title     = {Low-Thrust Gravity Assist Trajectory Optimization Using Evolutionary Neurocontrollers / I. Carnelli ; B. Dachwald ; M. Vasile ...},
  series = {Astrodynamics 2005 : proceedings of the AAS/AIAA astrodynamics conference held August 7 - 11, 2005, South Lake Tahoe, California / ed. by Bobby G. Williams. - Pt. 3. - (Advances in the astronautical sciences ; 123,3)},
  journal   = {Astrodynamics 2005 : proceedings of the AAS/AIAA astrodynamics conference held August 7 - 11, 2005, South Lake Tahoe, California / ed. by Bobby G. Williams. - Pt. 3. - (Advances in the astronautical sciences ; 123,3)},
  publisher = {Univelt},
  address   = {San Diego, Calif.},
  isbn      = {0-87703-527-X},
  pages     = {1911 -- 1928},
  year      = {2006},
  language  = {en}
}
@article{DachwaldLeipoldFichtner2003,
  author    = {Dachwald, Bernd and Leipold, M. and Fichtner, H.},
  title     = {Heliopause Explorer - A Sailcraft Mission to the Outer Boundaries of the Solar System / M. Leipold ; H. Fichtner ; B. Heber ... B. Dachwald ...},
  series = {Proceedings of the Fifth IAA International Conference on Low Cost Planetary Missions : 24 - 26 September 2003, ESTEC, Noordwijk, the Netherlands / [comp. by R. A. Harris]},
  journal   = {Proceedings of the Fifth IAA International Conference on Low Cost Planetary Missions : 24 - 26 September 2003, ESTEC, Noordwijk, the Netherlands / [comp. by R. A. Harris]},
  publisher = {ESA},
  address   = {Noordwijk},
  isbn      = {92-9092-853-0},
  pages     = {367 -- 375},
  year      = {2003},
  language  = {en}
}
@article{Dachwald2004,
  author    = {Dachwald, Bernd},
  title     = {Interplanetary Mission Analysis for Non-Perfectly Reflecting Solar Sailcraft Using Evolutionary Neurocontrol},
  series = {Astrodynamics 2003 : proceedings of the AAS/AIAA Astrodynamics Conference held August 3 - 7, 2003, Big Sky, Montana / ed. by Jean de Lafontaine. - Pt. 2. - (Advances in the astronautical sciences ; 116,2)},
  journal   = {Astrodynamics 2003 : proceedings of the AAS/AIAA Astrodynamics Conference held August 3 - 7, 2003, Big Sky, Montana / ed. by Jean de Lafontaine. - Pt. 2. - (Advances in the astronautical sciences ; 116,2)},
  publisher = {Univelt},
  address   = {San Diego, Calif.},
  isbn      = {0-87703-509-1},
  pages     = {1247 -- 1262},
  year      = {2004},
  language  = {en}
}
@article{DachwaldSeboldt2002,
  author    = {Dachwald, Bernd and Seboldt, Wolfgang},
  title     = {Optimization of Interplanetary Rendezvous Trajectories for Solar Sailcraft Using a Neurocontroller},
  series = {A collection of technical papers / AIAA Astrodynamics Specialist Conference : Monterey, California, 5 - 8 August 2002. - Vol. 2},
  journal   = {A collection of technical papers / AIAA Astrodynamics Specialist Conference : Monterey, California, 5 - 8 August 2002. - Vol. 2},
  publisher = {American Institute of Aeronautics and Astronautics},
  address   = {Reston, Va.},
  isbn      = {1-56347-549-9},
  pages     = {1263 -- 1270},
  year      = {2002},
  language  = {en}
}
@article{StaatTranKreissig2008,
  author    = {Staat, Manfred and Tran, Thanh Ngoc and Kreißig, R.},
  title     = {Load bearing capacity of thin shell structures made of elastoplastic material by direct methods},
  series = {Technische Mechanik. 28 (2008), H. 3-4},
  journal   = {Technische Mechanik. 28 (2008), H. 3-4},
  pages     = {299 -- 309},
  year      = {2008},
  language  = {en}
}
@article{TranPhamVuetal.2009,
  author    = {Tran, Thanh Ngoc and Pham, Phu Tinh and Vu, D. K. and Staat, Manfred},
  title     = {Reliability Analysis of Inelastic Shell Structures Under Variable Loads},
  series = {Limit States of Materials and Structures : Direct Methods / Hrsg. Dieter Weichert; Hrsg. Alan Ponter},
  journal   = {Limit States of Materials and Structures : Direct Methods / Hrsg. Dieter Weichert; Hrsg. Alan Ponter},
  publisher = {Springer Netherland},
  address   = {Berlin},
  isbn      = {978-1-4020-9633-4},
  pages     = {135 -- 156},
  year      = {2009},
  language  = {en}
}
@inproceedings{StaatHeitzer2002,
  author    = {Staat, Manfred and Heitzer, Michael},
  title     = {The restricted influence of kinematic hardening on shakedown loads},
  year      = {2002},
  abstract  = {Structural design analyses are conducted with the aim of verifying the exclusion of ratcheting. To this end it is important to make a clear distinction between the shakedown range and the ratcheting range. In cyclic plasticity more sophisticated hardening models have been suggested in order to model the strain evolution observed in ratcheting experiments. The hardening models used in shakedown analysis are comparatively simple. It is shown that shakedown analysis can make quite stable predictions of admissible load ranges despite the simplicity of the underlying hardening models. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis. Both give identical or similar shakedown ranges. Structural shakedown analyses show that the loading may have a more pronounced effect than the hardening model.},
  subject      = {Biomedizinische Technik},
  language  = {en}
}
@inproceedings{DachwaldKahleWie2006,
  author    = {Dachwald, Bernd and Kahle, Ralph and Wie, Bong},
  title     = {Solar sail Kinetic Energy Impactor (KEI) mission design tradeoffs for impacting and deflecting asteroid 99942 Apophis},
  series = {AIAA/AAS Astrodynamics Specialist Conference and Exhibit},
  booktitle = {AIAA/AAS Astrodynamics Specialist Conference and Exhibit},
  doi       = {10.2514/6.2006-6178},
  pages     = {1 -- 20},
  year      = {2006},
  abstract  = {Near-Earth asteroid 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several so-called gravitational keyholes during its 2029-encounter. Several pre-2029-deflection scenarios to prevent Apophis from doing this have been investigated so far. Because the keyholes are less than 1 km in size, a pre-2029 kinetic impact is clearly the best option because it requires only a small change in Apophis' orbit to nudge it out of a keyhole. A single solar sail Kinetic Energy Impactor (KEI) spacecraft that impacts Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages at about 0.75 AU would be a feasible option to do this. The spacecraft consists of a 160 m x 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. In this paper, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, solar sail Kinetic Energy Impactor (KEI) spacecraft are still a feasible option to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value. In this paper, we elaborate potential pre- and post-2029 KEI impact scenarios for a launch in 2020, and investigate tradeoffs between different mission parameters.},
  language  = {en}
}
@misc{Staat2006,
  author    = {Staat, Manfred},
  title     = {Technische Mechanik. Vorlesungsmitschrift. Korrigierter Nachdr. der 3. Aufl.},
  year      = {2006},
  abstract  = {{\"U}berarbeitete, korrigierte und erg{\"a}nzte Version einer Vorlesungsmitschrift von Sebastian Kr{\"a}mer. 172 S. Inhaltsverzeichnis 0 Einf{\"u}hrung in die Mechanik 1 Statik starrer K{\"o}rper 2 Elastostatik (Festigkeitslehre) 3 Kinematik 4 Kinetik Literatur},
  subject      = {Technische Mechanik},
  language  = {de}
}
@misc{Staat2006,
  author    = {Staat, Manfred},
  title     = {Engineering Mechanics. Lecture Notes. 2nd edition, translation of the 3rd corrected and extended German edition of "Technische Mechanik"},
  year      = {2006},
  abstract  = {English translation of the corrected lectures notes of Sebastian Kr{\"a}mer. Contents 0 Introduction to Mechanics 1 Statics of Rigid Bodies 2 Elastostatics (Strength of Materials) 3 Kinematics 4 Kinetics Literature},
  subject      = {Technische Mechanik},
  language  = {en}
}
@inproceedings{Staat2006,
  author    = {Staat, Manfred},
  title     = {Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability. - {\"U}berarb. Ausg.},
  year      = {2006},
  abstract  = {In: Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in J{\"u}lich, 21-24 November 1994. - Vienna , 1996. - Seite: 43 - 55 IAEA-TECDOC-920 Abstract: It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demon­strated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several addi­tional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings.},
  subject      = {Bruchmechanik},
  language  = {en}
}
@inproceedings{TranStaatKreissig2007,
  author    = {Tran, Thanh Ngoc and Staat, Manfred and Kreißig, R.},
  title     = {Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods},
  year      = {2007},
  abstract  = {Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton's method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{LeversStaatLaack2011,
  author    = {Levers, A. and Staat, Manfred and Laack, Walter van},
  title     = {Analyse der Langzeitwirkung der MBST® KernspinResonanzTherapie bei Gonarthrose},
  year      = {2011},
  abstract  = {Originalausgabe: Orthop{\"a}dische Praxis Jg. 47. 2011 H. 11; S. 536-543. Mit freundlicher Genehmigung des Verlags Zusammenfassung: Auf der Basis von Patientenabfragen mittels Fragebogen zum Schmerzempfinden und zur Einschr{\"a}nkung bei Aktivit{\"a}ten des allt{\"a}glichen Lebens wird die Langzeitwirkung der MBST® KernspinResonanz-Therapie bei Gonarthrose untersucht. An der Studie nahmen 39 Patienten teil, bei denen die Therapie bis zu vier Jahre zur{\"u}ckliegt. Neben einer Gesamtbetrachtung wird der Erfolg auch in Abh{\"a}ngigkeit von Alter, Geschlecht und sportlicher Aktivit{\"a}t analysiert. Insgesamt weist die Studie auf eine anhaltende Verbesserung des Gesundheitszustands mit zum Teil deutlicher Schmerzlinderung auch noch nach vier Jahren hin, jedoch mit einer leichten Schmerzzunahme gegen Ende des Untersuchungszeitraums von vier Jahren. Eine tendenziell positivere Wirkung bei Frauen, {\"a}lteren Menschen oder auch sportlich nicht-aktiven Patienten l{\"a}sst auf eine m{\"o}gliche Beeinflussung des Erfolgs der Therapie durch ({\"U}ber-)Belastung im Alltag schließen. Ein zus{\"a}tzlich positiver Effekt der Therapie auf die Knochendichte ist ebenfalls denkbar, dies bleibt jedoch offen.},
  subject      = {Kniegelenkarthrose},
  language  = {de}
}
@article{GorissenStaatLaack2012,
  author    = {Gorissen, P. and Staat, Manfred and Laack, Walter van},
  title     = {Experimentelle Kraftmessungen als Beitrag zur Wirksamkeitsbeurteilung von Schienbeinschonern im Fußballsport},
  series = {OUP Zeitschrift f{\"u}r die orthop{\"a}dische und unfallchirurgische Praxis},
  volume    = {1},
  journal   = {OUP Zeitschrift f{\"u}r die orthop{\"a}dische und unfallchirurgische Praxis},
  number    = {1},
  publisher = {Deutscher {\"A}rzte-Verlag},
  address   = {K{\"o}ln},
  issn      = {2193-5785},
  doi       = {10.3238/oup.2012.0010-0015},
  pages     = {10 -- 15},
  year      = {2012},
  abstract  = {Diese Studie besch{\"a}ftigte sich mit der D{\"a}mpfungswirkung von Schienbeinschonern, wie sie beim Fußball zum Einsatz kommen. Sie wurde mit Hilfe eines Pendelhammers durchgef{\"u}hrt, der verschiedene Aufschlagkr{\"a}fte auf die Schoner erm{\"o}glichte. Dabei wurde deutlich, dass Schienbeinschoner die beste Wirkung bei Maximalkr{\"a}ften unterhalb von 5kN erreichen k{\"o}nnen, dass bei gr{\"o}ßerer Belastung allerdings Verbesserungsbedarf besteht. Hierf{\"u}r konnte, u.a. durch den Einsatz neuer Materialien, ein guter Ansatzpunkt im „ad{\"a}quaten Zusammenspiel von Schale und Polsterung" der Schoner gefunden werden. Die Untersuchung hat weiterhin gezeigt, dass zumindest teilweise eine deutliche Verbesserung der D{\"a}mpfungswirkung der Schienbeinschoner in den letzten Jahren erreicht werden konnte.},
  subject      = {Fußball},
  language  = {de}
}