@article{ThomasWassenberg2014,
  author    = {Thomas, Axel and Wassenberg, Gerd},
  title     = {Erfolgreich sein im Kampf um die besten Talente : Employer Branding},
  series = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen},
  journal   = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen},
  publisher = {IHK Aachen},
  address   = {Aachen},
  year      = {2014},
  language  = {de}
}
@techreport{HoepnerSiers2014,
  author    = {Hoepner, Gert and Siers, Carsten},
  title     = {6. Studie Vertriebskompass / durchgef{\"u}hrt von der FH Aachen und der Siers \& Collegen GmbH},
  publisher = {FH Aachen},
  address   = {Aachen},
  organization    = {FH Aachen},
  pages     = {35 Bl.},
  year      = {2014},
  language  = {de}
}
@article{MartinGonzalezKotliarRiosMartinezetal.2014,
  author    = {Martin-Gonzalez, Anabel and Kotliar, Konstantin and Rios-Martinez, Jorge and Lanzl, Ines and Navab, Nassir},
  title     = {Mediated-reality magnification for macular degeneration rehabilitation},
  series = {Journal of Modern Optics},
  volume    = {61},
  journal   = {Journal of Modern Optics},
  number    = {17},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1362-3044},
  doi       = {10.1080/09500340.2014.936110},
  pages     = {1400 -- 1408},
  year      = {2014},
  language  = {en}
}
@incollection{BorchertBremen2014,
  author    = {Borchert, J{\"o}rg and Bremen, Frank},
  title     = {Gesch{\"a}fts- und Organisationsmodelle f{\"u}r ein Strom- und Gas-Portfoliomanagement},
  series = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche},
  booktitle = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche},
  publisher = {KS-Energy-Verl.},
  address   = {Berlin},
  isbn      = {978-3-9813142-9-8},
  pages     = {11 -- 28},
  year      = {2014},
  language  = {de}
}
@incollection{BurgerKirschMarcheretal.2014,
  author    = {Burger, Ulrich and Kirsch, Ansgar and Marcher, Thomas and H{\"o}ser, Sebastian},
  title     = {Geologisch-geotechnischer Planungsprozess von Tunnelbauten mit Schwerpunkt tiefliegender Tunnel},
  series = {Beton-Kalender ; Bd. 103: Unterirdisches Bauen, Grundbau, Eurocode 7},
  booktitle = {Beton-Kalender ; Bd. 103: Unterirdisches Bauen, Grundbau, Eurocode 7},
  publisher = {Ernst},
  address   = {Berlin},
  isbn      = {978-3-433-03051-6 ; 978-3-433-60335-2 ; 978-3-433-60508-0 ; 3-433-60508-4},
  pages     = {37 -- 62},
  year      = {2014},
  language  = {de}
}
@inproceedings{KirschFelberMarcheretal.2014,
  author    = {Kirsch, Ansgar and Felber, W. and Marcher, Thomas and Fuchs, W.},
  title     = {Geotechnical challenges during design and construction of a ski resort in Azerbaijan},
  series = {Geotechnics of roads and railways : proceedings of the 15th Danube - European Conference on Geotechnical Engineering : 9-11 September 2014, Vienna, Austria},
  booktitle = {Geotechnics of roads and railways : proceedings of the 15th Danube - European Conference on Geotechnical Engineering : 9-11 September 2014, Vienna, Austria},
  publisher = {{\"O}IAV - {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  address   = {Wien},
  organization    = {Danube - European Conference on Geotechnical Engineering <15, 2014, Wien>},
  isbn      = {978-3-902593-01-6},
  pages     = {757 -- 762},
  year      = {2014},
  language  = {en}
}
@inproceedings{RosinKubalskiButenweg2014,
  author    = {Rosin, Julia and Kubalski, Thomas and Butenweg, Christoph},
  title     = {Seismic Design of cylindrical liquid storage tanks},
  series = {Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed.},
  booktitle = {Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  organization    = {International Conference on Seismic Design of Industrial Facilities <2013, Aachen>},
  isbn      = {978-3-658-02810-7 (E-Book) ; 978-3-658-02809-1 (Print)},
  doi       = {10.1007/978-3-658-02810-7_36},
  pages     = {429 -- 440},
  year      = {2014},
  language  = {en}
}
@inproceedings{AltayButenwegKlinkel2014,
  author    = {Altay, Okyay and Butenweg, Christoph and Klinkel, Sven},
  title     = {Vibration mitigation of wind turbine towers by a new semiactive Tuned Liquid Column Damper},
  series = {6. Word Congress on Structural Control and Monitoring, 15 - 17 July, 2014 Barcelona,Spain},
  booktitle = {6. Word Congress on Structural Control and Monitoring, 15 - 17 July, 2014 Barcelona,Spain},
  year      = {2014},
  language  = {en}
}
@article{ButenwegMeyerFehling2014,
  author    = {Butenweg, Christoph and Meyer, Udo and Fehling, Ekkehard},
  title     = {EU-Projekt INSYSME: Innovative Techniken f{\"u}r erdbebensichere Ausfachungsw{\"a}nde aus Ziegelmauerwerk in Stahlbetonrahmentragwerken},
  series = {Mauerwerk : European journal of masonry},
  volume    = {18},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {2},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201400612},
  pages     = {78 -- 81},
  year      = {2014},
  abstract  = {Am 1. Oktober 2013 ist das auf drei Jahre angelegte EU-Forschungsprojekt INSYSME - Innovative Systeme f{\"u}r erdbebentaugliche Ausfachungsw{\"a}nde aus Ziegelmauerwerk in Stahlbetonrahmentragwerken - gestartet. Unter der Koordination der Universit{\"a}t Padua beteiligen sich 16 Partner aus sechs europ{\"a}ischen L{\"a}ndern (Deutschland, Griechenland, Italien, Portugal, Rum{\"a}nien, T{\"u}rkei). Als deutsche Partner nehmen die Arbeitsgemeinschaft Mauerziegel aus Bonn, die Universit{\"a}t Kassel sowie das Ingenieurb{\"u}ro SDA-engineering GmbH aus Herzogenrath, teil. Ziel der deutschen Partner ist die Entwicklung von innovativen Ausfachungssystemen aus monolithischem w{\"a}rmed{\"a}mmenden Ziegelmauerwerk, mit denen nicht nur eine erh{\"o}hte Erdbebensicherheit, sondern auch die sichere Erf{\"u}llung der steigenden Anforderungen aus Windbeanspruchungen gew{\"a}hrleistet werden k{\"o}nnen. Die Forschungsergebnisse sollen vom Partner SDA-engineering GmbH in die bereits seit einigen Jahren verf{\"u}gbare Softwarel{\"o}sung MINEA [1] integriert werden. Weitere Informationen stehen auf den Websites des Projektes [2] zur Verf{\"u}gung. Im vorliegenden Beitrag werden nach einer kurzen thematischen Einf{\"u}hrung die Ergebnisse von Tastversuchen an senkrecht zur Ebene belasteten Ausfachungsw{\"a}nden aus Planziegelmauerwerk vorgestellt. Im Anschluss wird das geplante Arbeitsprogramm der deutschen Partner im Projekt INSYSME beschrieben.},
  language  = {de}
}
@article{GellertButenweg2014,
  author    = {Gellert, Christoph and Butenweg, Christoph},
  title     = {Seismic analysis of masonry structures in German earthquake zones according to DIN EN 1998-1},
  series = {Mauerwerk : European journal of masonry},
  volume    = {18},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {3-4},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201400626},
  pages     = {188 -- 196},
  year      = {2014},
  abstract  = {Die Erdbeben in Albstadt 1978 (Magnitude 5,7), Roermond 1992 (Magnitude 5,9) oder in Waldkirch 2004 (Magnitude 5,1) haben verdeutlicht, dass die erdbebensichere Auslegung von Mauerwerksbauten auch in Deutschland von großer Bedeutung ist. Bereits im Jahr 1981 wurde die DIN 4149 (1981) "Bauten in deutschen Erdbebengebieten - Lastannahmen, Bemessung und Ausf{\"u}hrung {\"u}blicher Hochbauten" eingef{\"u}hrt, in der aber f{\"u}r Mauerwerksbauten nur wenige Anforderungen gestellt wurden. Diese Norm wurde durch den NABau-Arbeitsausschuss "Erdbeben; Sonderfragen" des Deutschen Instituts f{\"u}r Normung e.V. (DIN) auf Grundlage des Eurocode 8 (2004) vollst{\"a}ndig {\"u}berarbeitet und durch die DIN 4149 (2005) abgel{\"o}st, die umfangreiche Regelungen f{\"u}r die seismische Auslegung von Mauerwerksbauten enth{\"a}lt. Mittlerweile liegen die DIN EN 1998-1 (2010) und der Nationale Anhang DIN EN 1998-1/NA (2011) vor, die nach Einarbeitung der Ergebnisse der durchgef{\"u}hrten Anwendungserprobung bauaufsichtlich eingef{\"u}hrt und die DIN 4149 (2005) ersetzen werden. Der folgende Beitrag gibt einen {\"U}berblick {\"u}ber die seismische Berechnung und Bemessung von Mauerwerksbauten nach dem europ{\"a}ischen Regelwerk und illustriert deren Anwendung an einem baupraktischen Beispiel.},
  language  = {de}
}
@article{MeyerButenwegFehling2014,
  author    = {Meyer, Udo and Butenweg, Christoph and Fehling, Ekkehard},
  title     = {EU-Projekt INSYSME : innovative Systeme f{\"u}r erdbebentaugliche Ausfachungsw{\"a}nde aus Ziegelmauerwerk},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {89 (2014)},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  number    = {April},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S14 -- S15},
  year      = {2014},
  language  = {de}
}
@article{ButenwegSchmittRosen2014,
  author    = {Butenweg, Christoph and Schmitt, Timo and Rosen, Britta},
  title     = {Seismische Einwirkungen auf erdverlegte Rohrleitungssysteme},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  volume    = {89 (2014)},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  number    = {Heft 7/8},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {316 -- 324},
  year      = {2014},
  language  = {de}
}
@article{TuraliyevaYeshibaevDigeletal.2014,
  author    = {Turaliyeva, M. and Yeshibaev, A. and Digel, Ilya and Elibayeva, G. and Sydykova, A. and Uspabayeva, A. and Dosybayeva, G. and Zhylysbayeva, A. and Lakhanova, K.},
  title     = {Molecular-genetic identification of emerged novel invasive pathogens of Asiatic Elm Ulmus pumila L},
  series = {Life science journal},
  volume    = {11},
  journal   = {Life science journal},
  number    = {Spec. iss. 5s},
  publisher = {Marsland Press},
  address   = {New York},
  issn      = {1097-8135},
  doi       = {10.7537/marslsj1105s14.33},
  pages     = {171 -- 175},
  year      = {2014},
  abstract  = {The dwarf elm Ulmus pumila L. (Ulmaceae) is one of indigenous species of flora in Kazakhstan and forms a basis of dendroflora in virtually all settlements of the region. In the past decade, multiple outbreaks of previously unknown diseases of the small-leaved elm have been registered. In our study, by the molecular-genetic analysis it was found that the pathogens responsible for the outbreaks are microfungi belonging to the genus Fusarium - F. solani and F. oxysporum. The nucleotide sequences (ITS regions) isolated from the diseased trees showed very high similarity with the GenBank control numbers EU625403.1 and FJ478128.1 (100.0 and 99.0 \% respectively). Oncoming research will focus on the search of natural microbial antagonists of the discovered phytopathogens.},
  language  = {en}
}
@article{ButenwegRenault2014,
  author    = {Butenweg, Christoph and Renault, Philippe},
  title     = {Workshop der Gesellschaften zum EU-Projekt SHARE},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {89 (2014)},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  number    = {Oktober},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S2 -- S3},
  year      = {2014},
  language  = {de}
}
@article{LehnertzAnsmannBialonskietal.2014,
  author    = {Lehnertz, Klaus and Ansmann, Gerrit and Bialonski, Stephan and Dickten, Henning and Geier, Christian and Porz, Stephan},
  title     = {Evolving networks in the human epileptic brain},
  series = {Physica D: Nonlinear Phenomena},
  volume    = {267},
  journal   = {Physica D: Nonlinear Phenomena},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-2789},
  doi       = {10.1016/j.physd.2013.06.009},
  pages     = {7 -- 15},
  year      = {2014},
  abstract  = {Network theory provides novel concepts that promise an improved characterization of interacting dynamical systems. Within this framework, evolving networks can be considered as being composed of nodes, representing systems, and of time-varying edges, representing interactions between these systems. This approach is highly attractive to further our understanding of the physiological and pathophysiological dynamics in human brain networks. Indeed, there is growing evidence that the epileptic process can be regarded as a large-scale network phenomenon. We here review methodologies for inferring networks from empirical time series and for a characterization of these evolving networks. We summarize recent findings derived from studies that investigate human epileptic brain networks evolving on timescales ranging from few seconds to weeks. We point to possible pitfalls and open issues, and discuss future perspectives.},
  language  = {en}
}
@article{MansurovJandosovKerimkulovaetal.2014,
  author    = {Mansurov, Z. A. and Jandosov, J. M. and Kerimkulova, A. R. and Azat, S. and Zhubanova, A. A. and Digel, Ilya and Savistkaya, I. S. and Akimbekov, Nuraly S. and Kistaubaeva, A. S.},
  title     = {Nanostructured carbon materials for biomedical use},
  series = {Eurasian chemico-technological journal : quarterly journal of the International Higher Education Academy of Sciences},
  volume    = {15 (2013)},
  journal   = {Eurasian chemico-technological journal : quarterly journal of the International Higher Education Academy of Sciences},
  number    = {3},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  issn      = {1562-3920},
  doi       = {10.18321/ectj224},
  pages     = {209 -- 217},
  year      = {2014},
  abstract  = {One of the priority trends of carbon nanotechnology is creation of nanocomposite systems. Such carbon nanostructured composites were produced using - raw materials based on the products of agricultural waste, such as grape stones, apricot stones, rice husk. These products have a - wide spectrum of application and can be obtained in large quantities. The Institute of Combustion Problems has carried out the work on synthesis of the nanostructured carbon sorbents for multiple applications including the field of biomedicine. The article presents the data on the synthesis and physico-chemical properties of carbonaceous sorbents using physicochemical methods of investigation: separation and purification of biomolecules; isolation of phytohormone - fusicoccin; adsorbent INGO-1 in the form of an adsorption column for blood detoxification, oral (entero) sorbent - INGO-2; the study of efferent and probiotic properties and sorption activity in regard to the lipopolysaccharide (LPS), new biocomposites - based on carbonized rice husk (CRH) and cellular microorganisms; the use of CRH in wound treatment. A new material for blood detoxication (INGO-1) has been obtained. Adsorption of p-cresyl sulfate and indoxyl sulfate has shown that active carbon adsorbent can remove clinically significant level of p-cresyl sulfate and indoxyl sulfate from human plasma. Enterosorbent INGO-2 possesses high adsorption activity in relation to Gram-negative bacteria and their endotoxins. INGO-2 slows down the growth of conditionally pathogenic microorganisms, without having a negative effect on bifido and lactobacteria. The use of enterosorbent INGO-2 for sorption therapy may provide a solution to a complex problem - detoxication of the digestive tract and normalization of the intestinal micro ecology. The immobilized probiotic called "Riso-lact" was registered at the Ministry of Health of the Republic of Kazakhstan as a biologically active food additive. The developed technology is patented and provides production of the medicine in the form of freeze-dried biomass immobilized in vials.},
  language  = {en}
}
@inproceedings{GiresiniButenwegAndreinietal.2014,
  author    = {Giresini, Linda and Butenweg, Christoph and Andreini, M. and De Falco, A. and Sassu, M.},
  title     = {Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna},
  series = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  booktitle = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  organization    = {International Conference on Structural Analyses of Historical Conctructions <9, 2014, Mexico City>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@article{AkimbekovDigelOHerasetal.2014,
  author    = {Akimbekov, Nuraly S. and Digel, Ilya and O´Heras, C. and Tastambek, K.T. and Savitskaya, I.S. and Ualyeva, P.S. and Mansurov, Z.A. and Zhubanova, A.A.},
  title     = {Adsorption of bacterial lipopolysaccharides on carbonized rice husks obtained in the batch experiments},
  series = {Experimental Biology},
  volume    = {60},
  journal   = {Experimental Biology},
  number    = {1/2},
  publisher = {Al-Farabi Kazakh National University},
  address   = {Almaty},
  issn      = {1563-0218},
  pages     = {144 -- 148},
  year      = {2014},
  abstract  = {The scope of this study is the measurement of endotoxin adsorption rate for carbonized rice husk. It showed good adsorption properties for LPS. During the batch experiments, several techniques were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics.},
  language  = {en}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@article{ArinkinDigelPorstetal.2014,
  author    = {Arinkin, Vladimir and Digel, Ilya and Porst, Dariusz and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard},
  title     = {Phenotyping date palm varieties via leaflet cross-sectional imaging and artificial neural network application},
  series = {BMC bioinformatics},
  volume    = {15},
  journal   = {BMC bioinformatics},
  number    = {55},
  issn      = {1471-2105},
  doi       = {10.1186/1471-2105-15-55},
  pages     = {1 -- 8},
  year      = {2014},
  abstract  = {Background True date palms (Phoenix dactylifera L.) are impressive trees and have served as an indispensable source of food for mankind in tropical and subtropical countries for centuries. The aim of this study is to differentiate date palm tree varieties by analysing leaflet cross sections with technical/optical methods and artificial neural networks (ANN). Results Fluorescence microscopy images of leaflet cross sections have been taken from a set of five date palm tree cultivars (Hewlat al Jouf, Khlas, Nabot Soltan, Shishi, Um Raheem). After features extraction from images, the obtained data have been fed in a multilayer perceptron ANN with backpropagation learning algorithm. Conclusions Overall, an accurate result in prediction and differentiation of date palm tree cultivars was achieved with average prediction in tenfold cross-validation is 89.1\% and reached 100\% in one of the best ANN.},
  language  = {en}
}
@incollection{DachwaldBoehnhardtBrojetal.2014,
  author    = {Dachwald, Bernd and Boehnhardt, Herrmann and Broj, Ulrich and Geppert, Ulrich R. M. E. and Grundmann, Jan-Thimo and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Johnson, Les and K{\"u}hrt, Ekkehard and Mottola, Stefano and Macdonald, Malcolm and McInnes, Colin R. and Vasile, Massimiliano and Reinhard, Ruedeger},
  title     = {Gossamer roadmap technology reference study for a multiple NEO Rendezvous Mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)},
  pages     = {211 -- 226},
  year      = {2014},
  abstract  = {A technology reference study for a multiple near-Earth object (NEO) rendezvous mission with solar sailcraft is currently carried out by the authors of this paper. The investigated mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy based on the DLR/ESA Gossamer technology. The main scientific objective of the mission is to explore the diversity of NEOs. After direct interplanetary insertion, the solar sailcraft should—within less than 10 years—rendezvous three NEOs that are not only scientifically interesting, but also from the point of human spaceight and planetary defense. In this paper, the objectives of the study are outlined and a preliminary potential mission profile is presented.},
  language  = {en}
}
@article{GollandEngling2014,
  author    = {Golland, Alexander and Engling, Christoph},
  title     = {a-i3/BSI Symposium 2014: Sicherheit von Daten und Identit{\"a}ten angesichts NSA und Big Data},
  series = {DSB Datenschutz-Berater},
  volume    = {38},
  journal   = {DSB Datenschutz-Berater},
  number    = {7-8},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  isbn      = {0170-7256},
  pages     = {165 -- 166},
  year      = {2014},
  language  = {de}
}
@article{KronhardtAlexopoulosReisseletal.2014,
  author    = {Kronhardt, Valentina and Alexopoulos, Spiros and Reißel, Martin and Sattler, Johannes Christoph and Hoffschmidt, Bernhard and H{\"a}nel, Matthias and Doerbeck, Till},
  title     = {High-temperature thermal storage system for solar tower power plants with open-volumetric air receiver simulation and energy balancing of a discretized model},
  series = {Energy procedia},
  volume    = {49},
  journal   = {Energy procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102 (E-Journal) ; 1876-6102 (Print)},
  doi       = {10.1016/j.egypro.2014.03.094},
  pages     = {870 -- 877},
  year      = {2014},
  abstract  = {This paper describes the modeling of a high-temperature storage system for an existing solar tower power plant with open volumetric receiver technology, which uses air as heat transfer medium (HTF). The storage system model has been developed in the simulation environment Matlab/Simulink®. The storage type under investigation is a packed bed thermal energy storage system which has the characteristics of a regenerator. Thermal energy can be stored and discharged as required via the HTF air. The air mass flow distribution is controlled by valves, and the mass flow by two blowers. The thermal storage operation strategy has a direct and significant impact on the energetic and economic efficiency of the solar tower power plants.},
  language  = {en}
}
@inproceedings{RosinHenneboehlButenweg2014,
  author    = {Rosin, Julia and Henneb{\"o}hl, Benedickt and Butenweg, Christoph},
  title     = {Global buckling analysis of cylindrical liquid storage tanks under earthquake loading},
  series = {2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 6},
  booktitle = {2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 6},
  publisher = {Curran Associates, Inc.},
  address   = {Red Hook, NY},
  organization    = {European Conference on Earthquake Engineering and Seismology <2, 2014, Istanbul>},
  isbn      = {978-1-5108-1021-1},
  pages     = {5270 -- 5281},
  year      = {2014},
  language  = {en}
}
@incollection{NiemuellerEwertReuteretal.2014,
  author    = {Niem{\"u}ller, Tim and Ewert, Daniel and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {RoboCup logistics league sponsored by festo: A competitive factory automation testbed},
  series = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  booktitle = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  publisher = {Springer},
  address   = {Berlin},
  organization    = {RoboCup International Symposium <17, 2013, Eindhoven>},
  isbn      = {978-3-662-44467-2 (Print) 978-3-662-44468-9 (Online)},
  pages     = {336 -- 347},
  year      = {2014},
  abstract  = {A new trend in automation is to deploy so-called cyber-physical systems (CPS) which combine computation with physical processes. The novel RoboCup Logistics League Sponsored by Festo (LLSF) aims at such CPS logistic scenarios in an automation setting. A team of robots has to produce products from a number of semi-finished products which they have to machine during the game. Different production plans are possible and the robots need to recycle scrap byproducts. This way, the LLSF is a very interesting league offering a number of challenging research questions for planning, coordination, or communication in an application-driven scenario. In this paper, we outline the objectives of the LLSF and present steps for developing the league further towards a benchmark for logistics scenarios for CPS. As a major milestone we present the new automated referee system which helps in governing the game play as well as keeping track of the scored points in a very complex factory scenario.},
  language  = {en}
}
@misc{TippkoetterSiekerWiesenetal.2014,
  author    = {Tippk{\"o}tter, Nils and Sieker, T. and Wiesen, S. and Duwe, A. and Roth, J. and Ulber, Roland},
  title     = {Simultane Saccharifizierung und Fermentierung (SSF) sowie Produktion von Aceton, Butanol, Ethanol (ABE) und Dicarbons{\"a}uren aus technischer Cellulose},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201450297},
  pages     = {1518},
  year      = {2014},
  abstract  = {Technische Cellulose wurde als m{\"o}glicher Rohstoff zur fermentativen Produktbildung untersucht. Hierf{\"u}r wird Cellulose in der Lignocellulose-Bioraffinerie hergestellt und daraus Hydrolysat gewonnen. Die Pr{\"u}fung der technischen Hydrolysate als Substrate erfolgte anhand eines breiten Spektrums an Bioprodukten, von Kraftstoffen wie Ethanolund Butanol, bis zu den Dicarbons{\"a}uren Itacon- und Bernsteins{\"a}ure. Dabei werden Bakterien, Hefen und Pilze als Produktionsorganismen eingesetzt. Die einzelnen Herstellverfahren stellen unterschiedliche Anforderungen an die Substrathandhabung. Im Fall der Ethanol- und Butanol-Gewinnung kann eine simultane Saccharifizierung und Fermentierung (SSF) durchgef{\"u}hrt werden. Aufgrund der Produkttoxizit{\"a}t erfordert die Butanol-Herstellung dabei eine In-situ-Produktabtrennung durch L{\"o}semittelimpr{\"a}gnierte Partikel. Die Herstellung der beiden Dicarbons{\"a}uren unterscheidet sich in der Sensitivit{\"a}t der verwendeten Mikroorganismen gegen{\"u}ber Inhibitoren, die in Spuren im Hydrolysat enthalten sind. Die Bernteins{\"a}urebildung mit Actinobacillussuccinogenes kann mit unbehandeltem Hydrolysat erfolgen. Dagegen erfordert die Gewinnung von Itacons{\"a}ure mit A. terreus eine Detoxifizierung des Hydrolysats. Insgesamt konnte gezeigt werden, dass s{\"a}mtliche Bioraffinerie-Hydrolysate als Substrate f{\"u}r unterschiedliche Fermentationen geeignet sind.},
  language  = {de}
}
@article{HandtkeSchroeterJuergenetal.2014,
  author    = {Handtke, Stefan and Schroeter, Rebecca and J{\"u}rgen, Britta and Methling, Karen and Schl{\"u}ter, Rabea and Albrecht, Dirk and Hijum, Sacha A. F. T. van and Bongaerts, Johannes and Maurer, Karl-Heinz and Lalk, Michael and Schweder, Thomas and Hecker, Michael and Voigt, Birgit},
  title     = {Bacillus pumilus reveals a remarkably high resistance to hydrogen peroxide provoked oxidative stress},
  series = {PLOS one},
  volume    = {9},
  journal   = {PLOS one},
  number    = {1},
  publisher = {PLOS},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0085625},
  pages     = {e85625},
  year      = {2014},
  abstract  = {Bacillus pumilus is characterized by a higher oxidative stress resistance than other comparable industrially relevant Bacilli such as B. subtilis or B. licheniformis. In this study the response of B. pumilus to oxidative stress was investigated during a treatment with high concentrations of hydrogen peroxide at the proteome, transcriptome and metabolome level. Genes/proteins belonging to regulons, which are known to have important functions in the oxidative stress response of other organisms, were found to be upregulated, such as the Fur, Spx, SOS or CtsR regulon. Strikingly, parts of the fundamental PerR regulon responding to peroxide stress in B. subtilis are not encoded in the B. pumilus genome. Thus, B. pumilus misses the catalase KatA, the DNA-protection protein MrgA or the alkyl hydroperoxide reductase AhpCF. Data of this study suggests that the catalase KatX2 takes over the function of the missing KatA in the oxidative stress response of B. pumilus. The genome-wide expression analysis revealed an induction of bacillithiol (Cys-GlcN-malate, BSH) relevant genes. An analysis of the intracellular metabolites detected high intracellular levels of this protective metabolite, which indicates the importance of bacillithiol in the peroxide stress resistance of B. pumilus.},
  language  = {en}
}
@incollection{TranStaat2014,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Shakedown analysis of Reissner-Mindlin plates using the edge-based smoothed finite element method},
  series = {Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.},
  booktitle = {Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {978-94-007-6826-0 (Print) 978-94-007-6827-7 (Online)},
  doi       = {10.1007/978-94-007-6827-7_5},
  pages     = {101 -- 117},
  year      = {2014},
  abstract  = {This paper concerns the development of a primal-dual algorithm for limit and shakedown analysis of Reissner-Mindlin plates made of von Mises material. At each optimization iteration, the lower bound of the shakedown load multiplier is calculated simultaneously with the upper bound using the duality theory. An edge-based smoothed finite element method (ES-FEM) combined with the discrete shear gap (DSG) technique is used to improve the accuracy of the solutions and to avoid the transverse shear locking behaviour. The method not only possesses all inherent features of convergence and accuracy from ES-FEM, but also ensures that the total number of variables in the optimization problem is kept to a minimum compared with the standard finite element formulation. Numerical examples are presented to demonstrate the effectiveness of the present method.},
  language  = {en}
}
@book{Heuermann2014,
  author    = {Heuermann, Holger},
  title     = {Mikrowellentechnik},
  edition   = {4. Aufl.},
  pages     = {[Elektronische Ressource] IX, 225 S. ; graph. Darst.},
  year      = {2014},
  language  = {de}
}
@inproceedings{DuongStaat2014,
  author    = {Duong, Minh Tuan and Staat, Manfred},
  title     = {A face-based smoothed finite element method for hyperelastic models and tissue growth},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@article{FrotscherStaat2014,
  author    = {Frotscher, Ralf and Staat, Manfred},
  title     = {Stresses produced by different textile mesh implants in a tissue equivalent},
  series = {BioNanoMaterials},
  volume    = {15},
  journal   = {BioNanoMaterials},
  number    = {1-2},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2191-4672 (E-Journal); 2193-066X (E-Journal); 0011-8656 (Print); 1616-0177 (Print); 2193-0651 (Print)},
  doi       = {10.1515/bnm-2014-0003},
  pages     = {25 -- 30},
  year      = {2014},
  abstract  = {Two single-incision mini-slings used for treating urinary incontinence in women are compared with respect to the stresses they produce in their surrounding tissue. In an earlier paper we experimentally observed that these implants produce considerably different stress distributions in a muscle tissue equivalent. Here we perform 2D finite element analyses to compare the shear stresses and normal stresses in the tissue equivalent for the two meshes and to investigate their failure behavior. The results clearly show that the Gynecare TVT fails for increasing loads in a zipper-like manner because it gradually debonds from the surrounding tissue. Contrary to that, the tissue at the ends of the DynaMesh-SIS direct may rupture but only at higher loads. The simulation results are in good agreement with the experimental observations thus the computational model helps to interpret the experimental results and provides a tool for qualitative evaluation of mesh implants.},
  language  = {en}
}
@inproceedings{GoettscheRoether2014,
  author    = {G{\"o}ttsche, Joachim and R{\"o}ther, Sascha},
  title     = {Science College Overbach - Innovatives Bildungszentrum in J{\"u}lich-Barmen},
  series = {18. Internationale Passivhaustagung, Aachen, April 2014},
  booktitle = {18. Internationale Passivhaustagung, Aachen, April 2014},
  pages     = {6 Seiten},
  year      = {2014},
  abstract  = {Preprint der Autoren},
  language  = {de}
}
@incollection{KnottSofroniaGerressenetal.2014,
  author    = {Knott, Thomas C. and Sofronia, Raluca E. and Gerressen, Marcus and Law, Yuen and Davidescu, Arjana and Savii, George G. and Gatzweiler, Karl-Heinz and Staat, Manfred and Kuhlen, Torsten W.},
  title     = {Preliminary bone sawing model for a virtual reality-based training simulator of bilateral sagittal split osteotomy},
  series = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  booktitle = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12057-7 (Online)},
  doi       = {10.1007/978-3-319-12057-7_1},
  pages     = {1 -- 10},
  year      = {2014},
  abstract  = {Successful bone sawing requires a high level of skill and experience, which could be gained by the use of Virtual Reality-based simulators. A key aspect of these medical simulators is realistic force feedback. The aim of this paper is to model the bone sawing process in order to develop a valid training simulator for the bilateral sagittal split osteotomy, the most often applied corrective surgery in case of a malposition of the mandible. Bone samples from a human cadaveric mandible were tested using a designed experimental system. Image processing and statistical analysis were used for the selection of four models for the bone sawing process. The results revealed a polynomial dependency between the material removal rate and the applied force. Differences between the three segments of the osteotomy line and between the cortical and cancellous bone were highlighted.},
  language  = {en}
}
@article{AlhwarinFerreinScholl2014,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {IR stereo kinect: improving depth images by combining structured light with IR stereo},
  pages     = {1 -- 9},
  year      = {2014},
  language  = {en}
}
@article{DachwaldMikuckiTulaczyketal.2014,
  author    = {Dachwald, Bernd and Mikucki, Jill and Tulaczyk, Slawek and Digel, Ilya and Espe, Clemens and Feldmann, Marco and Francke, Gero and Kowalski, Julia and Xu, Changsheng},
  title     = {IceMole : A maneuverable probe for clean in situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems},
  series = {Annals of Glaciology},
  volume    = {55},
  journal   = {Annals of Glaciology},
  number    = {65},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  issn      = {1727-5644},
  doi       = {10.3189/2014AoG65A004},
  pages     = {14 -- 22},
  year      = {2014},
  abstract  = {There is significant interest in sampling subglacial environments for geobiological studies, but they are difficult to access. Existing ice-drilling technologies make it cumbersome to maintain microbiologically clean access for sample acquisition and environmental stewardship of potentially fragile subglacial aquatic ecosystems. The IceMole is a maneuverable subsurface ice probe for clean in situ analysis and sampling of glacial ice and subglacial materials. The design is based on the novel concept of combining melting and mechanical propulsion. It can change melting direction by differential heating of the melting head and optional side-wall heaters. The first two prototypes were successfully tested between 2010 and 2012 on glaciers in Switzerland and Iceland. They demonstrated downward, horizontal and upward melting, as well as curve driving and dirt layer penetration. A more advanced probe is currently under development as part of the Enceladus Explorer (EnEx) project. It offers systems for obstacle avoidance, target detection, and navigation in ice. For the EnEx-IceMole, we will pay particular attention to clean protocols for the sampling of subglacial materials for biogeochemical analysis. We plan to use this probe for clean access into a unique subglacial aquatic environment at Blood Falls, Antarctica, with return of a subglacial brine sample.},
  language  = {en}
}
@incollection{MacdonaldMcGrathAppourchauxetal.2014,
  author    = {Macdonald, Malcolm and McGrath, C. and Appourchaux, T. and Dachwald, Bernd and Finsterle, W. and Gizon, L. and Liewer, P. C. and McInnes, Colin R. and Mengali, G. and Seboldt, Wolfgang and Sekii, T. and Solanki, S. K. and Velli, M. and Wimmer-Schweingruber, R. F. and Spietz, Peter and Reinhard, Ruedeger},
  title     = {Gossamer roadmap technology reference study for a solar polar mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  editor    = {Macdonald, Malcolm},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-642-34906-5},
  doi       = {10.1007/978-3-642-34907-2_17},
  pages     = {243 -- 257},
  year      = {2014},
  abstract  = {A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100-125 m to deliver a 'sufficient value' minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.},
  language  = {en}
}
@inproceedings{TranStaatStavroulakis2014,
  author    = {Tran, Ngoc Trinh and Staat, Manfred and Stavroulakis, G. E.},
  title     = {A multicriteria method for truss optimization},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@article{LeandroBungCarvalho2014,
  author    = {Leandro, J. and Bung, Daniel Bernhard and Carvalho, R.},
  title     = {Measuring void fraction and velocity fields of a stepped spillway for skimming flow using non-intrusive methods},
  series = {Experiments in fluids},
  journal   = {Experiments in fluids},
  number    = {55},
  publisher = {Springer Nature},
  address   = {Heidelberg},
  issn      = {0723-4864 (Print) ; 1432-1114 (Online)},
  doi       = {10.1007/s00348-014-1732-6},
  pages     = {Art. 1732},
  year      = {2014},
  language  = {en}
}
@inproceedings{FrotscherKochRaatschenetal.2014,
  author    = {Frotscher, Ralf and Koch, Jan-Peter and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {Evaluation of a computational model for drug action on cardiac tissue},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@book{Laack2014,
  author    = {Laack, Walter van},
  title     = {Schnittstelle Tod: Was spricht f{\"u}r unser Weiterleben?},
  publisher = {van Laack},
  address   = {Aachen},
  isbn      = {978-3-936624-19-9},
  pages     = {100 S.},
  year      = {2014},
  language  = {de}
}
@inproceedings{BhattaraiFrotscherSoraetal.2014,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Sora, M.-C. and Staat, Manfred},
  title     = {A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@article{KueppersSteffenHellmuthetal.2014,
  author    = {K{\"u}ppers, Tobias and Steffen, Victoria and Hellmuth, Hendrik and O'Connell, Timothy and Bongaerts, Johannes and Maurer, Karl-Heinz and Wiechert, Wolfgang},
  title     = {Developing a new production host from a blueprint: Bacillus pumilus as an industrial enzyme producer},
  series = {Microbial cell factories},
  volume    = {13},
  journal   = {Microbial cell factories},
  publisher = {BioMed Central},
  address   = {London},
  issn      = {1475-2859 (E-Journal)},
  doi       = {10.1186/1475-2859-13-46},
  pages     = {Article No. 46},
  year      = {2014},
  language  = {en}
}
@article{PhamStaat2014,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {FEM-based shakedown analysis of hardening structures},
  series = {Asia Pacific journal on computational engineering},
  journal   = {Asia Pacific journal on computational engineering},
  number    = {1},
  publisher = {SpringerOpen},
  address   = {Berlin},
  issn      = {2196-1166 (E-Journal)},
  doi       = {10.1186/2196-1166-1-4},
  pages     = {Article No. 4},
  year      = {2014},
  abstract  = {This paper develops a new finite element method (FEM)-based upper bound algorithm for limit and shakedown analysis of hardening structures by a direct plasticity method. The hardening model is a simple two-surface model of plasticity with a fixed bounding surface. The initial yield surface can translate inside the bounding surface, and it is bounded by one of the two equivalent conditions: (1) it always stays inside the bounding surface or (2) its centre cannot move outside the back-stress surface. The algorithm gives an effective tool to analyze the problems with a very high number of degree of freedom. Our numerical results are very close to the analytical solutions and numerical solutions in literature.},
  language  = {en}
}
@article{HaagZontarSchleupenetal.2014,
  author    = {Haag, S. and Zontar, D. and Schleupen, Josef and M{\"u}ller, T. and Brecher, C.},
  title     = {Chain of refined perception in self-optimizing assembly of micro-optical systems},
  series = {Journal of sensors and sensor systems},
  volume    = {3},
  journal   = {Journal of sensors and sensor systems},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-3-87-2014},
  pages     = {87 -- 95},
  year      = {2014},
  abstract  = {Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements - especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.},
  language  = {en}
}
@inproceedings{HecklWeilerFleischhakeretal.2014,
  author    = {Heckl, O. H. and Weiler, Sascha and Fleischhaker, Robert and Gebs, Raphael and Budnicki, Aleksander and Wolf, M. and Kleinbauer, Jochen and Russ, S. and Kumkar, M. and Sutter, Dirk H.},
  title     = {Industry-grade high average power femtosecond light source},
  series = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)},
  booktitle = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)},
  editor    = {Heisterkamp, Alexander and Herman, Peter R. and Meunier, Michael and Nolte, Stefan},
  publisher = {SPIE, International Society for Optical Engineering},
  doi       = {10.1117/12.2039337},
  pages     = {89720P -- 89720P-7},
  year      = {2014},
  language  = {en}
}
@misc{Jacobs2014,
  author    = {Jacobs, Stephan},
  title     = {Es gibt keine nichtfunktionalen Tests. Es gibt nur nichtfunktionale Anforderungen!},
  pages     = {27 Folien},
  year      = {2014},
  language  = {de}
}
@article{ScheerWolf2014,
  author    = {Scheer, Nico and Wolf, C. Roland},
  title     = {Genetically humanized mouse models of drug metabolizing enzymes and transporters and their applications},
  series = {Xenobiotica},
  volume    = {44},
  journal   = {Xenobiotica},
  number    = {2},
  publisher = {Taylor \& Francis},
  address   = {Abingdon},
  issn      = {1366-5928},
  doi       = {10.3109/00498254.2013.815831},
  pages     = {96 -- 108},
  year      = {2014},
  abstract  = {1. Drug metabolizing enzymes and transporters play important roles in the absorption, metabolism, tissue distribution and excretion of various compounds and their metabolites and thus can significantly affect their efficacy and safety. Furthermore, they can be involved in drug-drug interactions which can result in adverse responses, life-threatening toxicity or impaired efficacy. Significant species differences in the interaction of compounds with drug metabolizing enzymes and transporters have been described. 2. In order to overcome the limitation of animal models in accurately predicting human responses, a large variety of mouse models humanized for drug metabolizing enzymes and to a lesser extent drug transporters have been created. 3. This review summarizes the literature describing these mouse models and their key applications in studying the role of drug metabolizing enzymes and transporters in drug bioavailability, tissue distribution, clearance and drug-drug interactions as well as in human metabolite testing and risk assessment. 4. Though such humanized mouse models have certain limitations, there is great potential for their use in basic research and for testing and development of new medicines. These limitations and future potentials will be discussed.},
  language  = {en}
}
@book{SchulteZurhausen2014,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Organisation},
  edition   = {6., {\"u}berarb. und aktualisierte Aufl.},
  publisher = {Vahlen},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8006-4689-0},
  pages     = {XVI, 687 S. : graph. Darst.},
  year      = {2014},
  language  = {de}
}
@inproceedings{SchirraBauschatWatmuff2014,
  author    = {Schirra, Julian and Bauschat, J.-Michael and Watmuff, J.H.},
  title     = {Accurate induced drag prediction for highly non-planar lifting systems},
  series = {19th Australasian Fluid Mechanics Conference : 8.-11. Dezember 2014, Melbourne, Australia},
  booktitle = {19th Australasian Fluid Mechanics Conference : 8.-11. Dezember 2014, Melbourne, Australia},
  pages     = {4 Seiten},
  year      = {2014},
  abstract  = {The impact of wake model effects is investigated for two highly non-planar lifting systems. Dependent on the geometrical arrangement of the configuration, the wake model shape is found to considerably affect the estimation. Particularly at higher angles of attack, an accurate estimation based on the common linear wake model approaches is involved.},
  language  = {en}
}
@article{JoerissenHeger2014,
  author    = {J{\"o}rissen, J{\"o}rg and Heger, Michael},
  title     = {Zur Wirkung hochschuldidaktisch fundierter und in den Fachbereichen verankerter Lehrveranstaltungsevaluation},
  series = {Qualit{\"a}t in der Wissenschaft (QiW)},
  volume    = {8},
  journal   = {Qualit{\"a}t in der Wissenschaft (QiW)},
  number    = {2+3},
  publisher = {Universit{\"a}tsverlag Webler},
  address   = {Bielefeld},
  issn      = {1860-3041},
  pages     = {70 -- 80},
  year      = {2014},
  language  = {de}
}