@article{Timme2024,
  author    = {Timme, Michael},
  title     = {Kaufvertrag: Das Zusammentreffen von Beschaffenheitsvereinbarung und Gew{\"a}hrleistungsausschluss - ein Spannungsverh{\"a}ltnis},
  series = {Monatsschrift f{\"u}r Deutsches Recht},
  volume    = {78},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht},
  number    = {12},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {2194-4202 (online)},
  doi       = {10.9785/mdtr-2024-781203},
  pages     = {745 -- 748},
  year      = {2024},
  abstract  = {Wer A sagt, muss zumindest im Kaufrecht nicht immer B sagen: Es kommt nicht selten vor, dass sich in einem Kaufvertrag einerseits ein wirksamer Ausschluss der Gew{\"a}hrleistung des Verk{\"a}ufers f{\"u}r Sachm{\"a}ngel findet, die Parteien aber andererseits gleichwohl eine Beschaffenheitsvereinbarung f{\"u}r bestimmte Eigenschaften vertraglich festlegen. In diesem Problemfeld f{\"u}hrt eine aktuelle Entscheidung des BGH zu weiteren Kl{\"a}rungen f{\"u}r die Praxis (BGH, Urt. v. 10.4.2024 - VIII ZR 161/23, MDR 2024, 706). Der folgende Beitrag setzt sich mit den vielf{\"a}ltigen Aspekten der Entscheidung auseinander und erl{\"a}utert, aus welchen Gr{\"u}nden der BGH dem K{\"a}ufer einige goldene Br{\"u}cken f{\"u}r einen Schadensersatzanspruch gebaut hat.},
  language  = {de}
}
@article{OezsoyluAliaziziWagneretal.2024,
  author    = {{\"O}zsoylu, Dua and Aliazizi, Fereshteh and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Template bacteria-free fabrication of surface imprinted polymer-based biosensor for E. coli detection using photolithographic mimics: Hacking bacterial adhesion},
  series = {Biosensors and Bioelectronics},
  volume    = {261},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4235 (eISSN)},
  doi       = {10.1016/j.bios.2024.116491},
  pages     = {11 Seiten},
  year      = {2024},
  abstract  = {As one class of molecular imprinted polymers (MIPs), surface imprinted polymer (SIP)-based biosensors show great potential in direct whole-bacteria detection. Micro-contact imprinting, that involves stamping the template bacteria immobilized on a substrate into a pre-polymerized polymer matrix, is the most straightforward and prominent method to obtain SIP-based biosensors. However, the major drawbacks of the method arise from the requirement for fresh template bacteria and often non-reproducible bacteria distribution on the stamp substrate. Herein, we developed a positive master stamp containing photolithographic mimics of the template bacteria (E. coli) enabling reproducible fabrication of biomimetic SIP-based biosensors without the need for the "real" bacteria cells. By using atomic force and scanning electron microscopy imaging techniques, respectively, the E. coli-capturing ability of the SIP samples was tested, and compared with non-imprinted polymer (NIP)-based samples and control SIP samples, in which the cavity geometry does not match with E. coli cells. It was revealed that the presence of the biomimetic E. coli imprints with a specifically designed geometry increases the sensor E. coli-capturing ability by an "imprinting factor" of about 3. These findings show the importance of geometry-guided physical recognition in bacterial detection using SIP-based biosensors. In addition, this imprinting strategy was employed to interdigitated electrodes and QCM (quartz crystal microbalance) chips. E. coli detection performance of the sensors was demonstrated with electrochemical impedance spectroscopy (EIS) and QCM measurements with dissipation monitoring technique (QCM-D).},
  language  = {en}
}
@book{DrummScheuermannWeidner2024,
  author    = {Drumm, Christian and Scheuermann, Bernd and Weidner, Stefan},
  title     = {Introduction to SAP S/4HANA® : The official companion book based on model company Global Bike-for learning, teaching, and training},
  publisher = {Espresso Tutorials},
  address   = {Gleichen},
  isbn      = {9783960122685},
  pages     = {619 Seiten},
  year      = {2024},
  abstract  = {This easy-to-understand introduction to SAP S/4HANA guides you through the central processes in sales, purchasing and procurement, finance, production, and warehouse management using the model company Global Bike. Familiarize yourself with the basics of business administration, the relevant organizational data, master data, and transactional data, as well as a selection of core business processes in SAP. Using practical examples and tutorials, you will soon become an SAP S/4HANA professional! Tutorials and exercises for beginners, advanced users, and experts make it easy for you to practice your new knowledge. The prerequisite for this book is access to an SAP S/4HANA client with Global Bike version 4.1. - Business fundamentals and processes in the SAP system - Sales, purchasing and procurement, production, finance, and warehouse management - Tutorials at different qualification levels, exercises, and recap of case studies - Includes extensive download material for students, lecturers, and professors},
  language  = {en}
}
@article{HaegerJolmesOyenetal.2024,
  author    = {Haeger, Gerrit and Jolmes, Tristan and Oyen, Sven and Jaeger, Karl-Erich and Bongaerts, Johannes and Sch{\"o}rken, Ulrich and Siegert, Petra},
  title     = {Novel recombinant aminoacylase from Paraburkholderia monticola capable of N-acyl-amino acid synthesis},
  series = {Applied Microbiology and Biotechnology},
  journal   = {Applied Microbiology and Biotechnology},
  number    = {108},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0614},
  doi       = {10.1007/s00253-023-12868-8},
  pages     = {14 Seiten},
  year      = {2024},
  abstract  = {N-Acyl-amino acids can act as mild biobased surfactants, which are used, e.g., in baby shampoos. However, their chemical synthesis needs acyl chlorides and does not meet sustainability criteria. Thus, the identification of biocatalysts to develop greener synthesis routes is desirable. We describe a novel aminoacylase from Paraburkholderia monticola DSM 100849 (PmAcy) which was identified, cloned, and evaluated for its N-acyl-amino acid synthesis potential. Soluble protein was obtained by expression in lactose autoinduction medium and co-expression of molecular chaperones GroEL/S. Strep-tag affinity purification enriched the enzyme 16-fold and yielded 15 mg pure enzyme from 100 mL of culture. Biochemical characterization revealed that PmAcy possesses beneficial traits for industrial application like high temperature and pH-stability. A heat activation of PmAcy was observed upon incubation at temperatures up to 80 °C. Hydrolytic activity of PmAcy was detected with several N-acyl-amino acids as substrates and exhibited the highest conversion rate of 773 U/mg with N-lauroyl-L-alanine at 75 °C. The enzyme preferred long-chain acyl-amino-acids and displayed hardly any activity with acetyl-amino acids. PmAcy was also capable of N-acyl-amino acid synthesis with good conversion rates. The best synthesis results were obtained with the cationic L-amino acids L-arginine and L-lysine as well as with L-leucine and L-phenylalanine. Exemplarily, L-phenylalanine was acylated with fatty acids of chain lengths from C8 to C18 with conversion rates of up to 75\%. N-lauroyl-L-phenylalanine was purified by precipitation, and the structure of the reaction product was verified by LC-MS and NMR.},
  language  = {en}
}
@article{BoehnischBraunMuscarelloetal.2024,
  author    = {B{\"o}hnisch, Nils and Braun, Carsten and Muscarello, Vincenzo and Marzocca, Pier},
  title     = {About the wing and whirl flutter of a slender wing-propeller system},
  series = {Journal of Aircraft},
  journal   = {Journal of Aircraft},
  publisher = {AIAA},
  address   = {Reston, Va.},
  issn      = {1533-3868},
  doi       = {10.2514/1.C037542},
  pages     = {1 -- 14},
  year      = {2024},
  abstract  = {Next-generation aircraft designs often incorporate multiple large propellers attached along the wingspan (distributed electric propulsion), leading to highly flexible dynamic systems that can exhibit aeroelastic instabilities. This paper introduces a validated methodology to investigate the aeroelastic instabilities of wing-propeller systems and to understand the dynamic mechanism leading to wing and whirl flutter and transition from one to the other. Factors such as nacelle positions along the wing span and chord and its propulsion system mounting stiffness are considered. Additionally, preliminary design guidelines are proposed for flutter-free wing-propeller systems applicable to novel aircraft designs. The study demonstrates how the critical speed of the wing-propeller systems is influenced by the mounting stiffness and propeller position. Weak mounting stiffnesses result in whirl flutter, while hard mounting stiffnesses lead to wing flutter. For the latter, the position of the propeller along the wing span may change the wing mode shapes and thus the flutter mechanism. Propeller positions closer to the wing tip enhance stability, but pusher configurations are more critical due to the mass distribution behind the elastic axis.},
  language  = {en}
}
@article{AyalaHarrisKleefeld2024,
  author    = {Ayala, Rafael Ceja and Harris, Isaac and Kleefeld, Andreas},
  title     = {Direct sampling method via Landweber iteration for an absorbing scatterer with a conductive boundary},
  series = {Inverse Problems and Imaging},
  volume    = {18},
  journal   = {Inverse Problems and Imaging},
  number    = {3},
  publisher = {AIMS},
  address   = {Springfield},
  issn      = {1930-8337},
  doi       = {10.3934/ipi.2023051},
  pages     = {708 -- 729},
  year      = {2024},
  abstract  = {In this paper, we consider the inverse shape problem of recovering isotropic scatterers with a conductive boundary condition. Here, we assume that the measured far-field data is known at a fixed wave number. Motivated by recent work, we study a new direct sampling indicator based on the Landweber iteration and the factorization method. Therefore, we prove the connection between these reconstruction methods. The method studied here falls under the category of qualitative reconstruction methods where an imaging function is used to recover the absorbing scatterer. We prove stability of our new imaging function as well as derive a discrepancy principle for recovering the regularization parameter. The theoretical results are verified with numerical examples to show how the reconstruction performs by the new Landweber direct sampling method.},
  language  = {en}
}
@techreport{BirmansSchickTamborninoetal.2024,
  type      = {Working Paper},
  author    = {Birmans, Katrin and Schick, Elena and Tambornino, Philipp and Ullrich, Anna Valentine},
  title     = {Ingenieurwissenschaften im Fokus: Zug{\"a}nge zu einem effektiven Forschungsdatenmanagement an HAW},
  doi       = {10.5281/zenodo.12545429},
  pages     = {49 Seiten},
  year      = {2024},
  abstract  = {Im Rahmen der Love Data Week vom 12. bis 16.02.2024 haben die BMBF-Projekte FDM2_TH_Koeln der TH K{\"o}ln (FK 16FDFH105) und Persist@HAW der FH Aachen (FK 16FDFH129) am 15.02.2024 gemeinsam eine Online-Veranstaltung mit dem Titel „Ingenieurwissenschaften im Fokus: Zug{\"a}nge zu einem effektiven Forschungsdatenmanagement an HAW" angeboten. Diese richtete sich an Forschende aus den Ingenieurwissenschaften, die einen ersten Zugang zum Thema Forschungsdatenmanagement (FDM) suchen und erfahren m{\"o}chten, welche speziellen Angebote f{\"u}r die Daten aus den Ingenieurwissenschaften existieren. In der Veranstaltung wurden wesentliche Aspekte des Forschungsdatenmanagements entlang des Datenlebenszyklus beleuchtet. Ziel war es, den Teilnehmenden praxisnahe Einblicke und Hilfestellungen zu einem effektiven Umgang mit Forschungsdaten an Hochschulen f{\"u}r Angewandte Wissenschaften (HAW) zu bieten. Durch Beispiele und konkrete Empfehlungen wurde das Thema zug{\"a}nglich gemacht.},
  language  = {de}
}
@techreport{BirmansTamborninoUllrich2024,
  type      = {Working Paper},
  author    = {Birmans, Katrin and Tambornino, Philipp and Ullrich, Anna Valentine},
  title     = {5 Gr{\"u}nde f{\"u}r Coscine - Handreichung f{\"u}r Forschende an HAW},
  doi       = {10.5281/zenodo.12156734},
  pages     = {1 Seite},
  year      = {2024},
  abstract  = {Welche Vorteile bietet die Forschungsdatenmanagement-Plattform Coscine f{\"u}r die Verwaltung von Daten in Forschungsprojekten? Hierzu gibt die Handreichung einen schnellen {\"U}berblick {\"u}ber den landesgef{\"o}rderten Dienst Coscine f{\"u}r Forschende und FDM-Service-Personal an HAW in NRW (DH.NRW-Hochschulen). FDM-Service-Mitarbeitende k{\"o}nnen die Handreichung in ihrer Beratung zu Coscine einsetzen und mit der Eingabemaske in der Kopfzeile des Dokuments auf ihre Hochschule anpassen.},
  language  = {de}
}
@incollection{Golland2024,
  author    = {Golland, Alexander},
  title     = {Kommentierung von \S\S 6 bis 10 EKD-Datenschutzgesetz},
  series = {EKD-Datenschutzgesetz. Datenschutzbestimmungen der evangelischen Kirche},
  booktitle = {EKD-Datenschutzgesetz. Datenschutzbestimmungen der evangelischen Kirche},
  editor    = {Wagner, Ralph},
  publisher = {Nomos},
  address   = {Baden-Baden},
  isbn      = {978-3-8487-8111-9},
  pages     = {153 -- 228},
  year      = {2024},
  language  = {de}
}
@techreport{BarnatArntzBerneckeretal.2024,
  type      = {Working Paper},
  author    = {Barnat, Miriam and Arntz, Kristian and Bernecker, Andreas and Fissabre, Anke and Franken, Norbert and Goldbach, Daniel and H{\"u}ning, Felix and J{\"o}rissen, J{\"o}rg and Kirsch, Ansgar and Pettrak, J{\"u}rgen and Rexforth, Matthias and Josef, Rosenkranz and Terstegge, Andreas},
  title     = {Strategische Gestaltung von Studieng{\"a}ngen f{\"u}r die Zukunft: Ein kollaborativ entwickeltes Self-Assessment},
  series = {Hochschulforum Digitalisierung - Diskussionspapier},
  journal   = {Hochschulforum Digitalisierung - Diskussionspapier},
  publisher = {Stifterverband f{\"u}r die Deutsche Wissenschaft},
  address   = {Berlin},
  issn      = {2365-7081},
  pages     = {16 Seiten},
  year      = {2024},
  abstract  = {Das Diskussionspapier beschreibt einen Prozess an der FH Aachen zur Entwicklung und Implementierung eines Self-Assessment-Tools f{\"u}r Studieng{\"a}nge. Dieser Prozess zielte darauf ab, die Relevanz der Themen Digitalisierung, Internationalisierung und Nachhaltigkeit in Studieng{\"a}ngen zu st{\"a}rken. Durch Workshops und kollaborative Entwicklung mit Studiendekan:innen entstand ein Fragebogen, der zur Reflexion und strategischen Weiterentwicklung der Studieng{\"a}nge dient.},
  language  = {de}
}
@inproceedings{RuettersBragardDolls2024,
  author    = {R{\"u}tters, Ren{\´e} and Bragard, Michael and Dolls, Sarah},
  title     = {The Inverted Rotary Pendulum: Facilitating Practical Teaching in Advanced Control Engineering},
  series = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2165-9559},
  doi       = {10.1109/EDUCON60312.2024.10578937},
  pages     = {5 Seiten},
  year      = {2024},
  abstract  = {This paper outlines a practical approach to teach control engineering principles, with an inverted rotary pendulum, serving as an illustrative example. It shows how the pendulum is embedded in an advanced course of control engineering. This approach is incorporated into a flipped-classroom concept, as well as classical teaching concepts, offering students practical experience in control engineering. In addition, the design of the pendulum is shown, using a Raspberry Pi as the target platform for Matlab Simulink. This pendulum can be used in the classroom to evaluate the controller design mentioned above. It is analysed if the use of the pendulum generates a deeper understanding of the learning contents.},
  language  = {en}
}
@inproceedings{BeckerBragard2024,
  author    = {Becker, Tim and Bragard, Michael},
  title     = {Low-Voltage DC Training Lab for Electric Drives - Optimizing the Balancing Act Between High Student Throughput and Individual Learning Speed},
  series = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2165-9559},
  doi       = {10.1109/EDUCON60312.2024.10578902},
  pages     = {8 Seiten},
  year      = {2024},
  abstract  = {After a brief introduction of conventional laboratory structures, this work focuses on an innovative and universal approach for a setup of a training laboratory for electric machines and drive systems. The novel approach employs a central 48 V DC bus, which forms the backbone of the structure. Several sets of DC machine, asynchronous machine and synchronous machine are connected to this bus. The advantages of the novel system structure are manifold, both from a didactic and a technical point of view: Student groups can work on their own performance level in a highly parallelized and at the same time individualized way. Additional training setups (similar or different) can easily be added. Only the total power dissipation has to be provided, i.e. the DC bus balances the power flow between the student groups. Comparative results of course evaluations of several cohorts of students are shown.},
  language  = {en}
}
@incollection{Fissabre2024,
  author    = {Fissabre, Anke},
  title     = {Eine moderne Sainte-Chapelle in K{\"o}ln. Otto Bartnings Stahlkirche auf der Pressa 1928},
  series = {Baugedanken: Einsichten, Ansichten, Aussichten f{\"u}r Jan Pieper zum 80. Geburtstag},
  booktitle = {Baugedanken: Einsichten, Ansichten, Aussichten f{\"u}r Jan Pieper zum 80. Geburtstag},
  editor    = {Naujokat, Anke and Hake, Verena and Schindler, Bruno and Sch{\"o}tten, Bj{\"o}rn},
  publisher = {Geym{\"u}ller Verag f{\"u}r Architektur},
  address   = {Aachen},
  isbn      = {978-3-943164-87-9},
  pages     = {66 -- 81},
  year      = {2024},
  language  = {de}
}
@article{ChwallekNawrathKrastinaetal.2024,
  author    = {Chwallek, Constanze and Nawrath, Lara and Krastina, Anzelika and Bruksle, Ieva},
  title     = {Supportive research on sustainable entrepreneurship and business practices},
  series = {SECA Sustainable Entrepreneurship for Climate Action},
  journal   = {SECA Sustainable Entrepreneurship for Climate Action},
  number    = {3},
  publisher = {Lapland University of Applied Sciences Ltd},
  address   = {Rovaniemi},
  isbn      = {978-952-316-514-4 (pdf)},
  issn      = {2954-1654 (on-line publication)},
  pages     = {67 Seiten},
  year      = {2024},
  language  = {en}
}
@article{Golland2024,
  author    = {Golland, Alexander},
  title     = {Bußgelder bei Datenschutzverst{\"o}ßen durch Unternehmen},
  series = {NJW Neue Juristische Wochenschrift},
  journal   = {NJW Neue Juristische Wochenschrift},
  number    = {6},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0341-1915},
  pages     = {325 -- 329},
  year      = {2024},
  abstract  = {Bald eine Dekade ist es her, dass diese ann{\"a}hernd mantraartig wiederholte Phrase Unternehmen zur Umsetzung datenschutzrechtlicher Vorgaben incentivierte. Was ist davon geblieben? Nur wenige in Deutschland verh{\"a}ngte Bußgelder erreichten Millionenh{\"o}he. Hintergrund ist (auch) das deutsche Ordnungswidrigkeitenrecht, welches in einem Spannungsverh{\"a}ltnis zu den Vorgaben der DS-GVO steht. Ein Bußgeldbescheid der Berliner Datenschutzaufsicht gegen die Deutsche Wohnen sollte Ausl{\"o}ser eines langen, fortdauernden Rechtsstreits werden. Auf Vorlage des KG hatte der EuGH in der Rechtssache C-807/21 („Deutsche Wohnen") erstmals Gelegenheit, sich zur Frage der Bußgeldhaftung zu positionieren.},
  language  = {de}
}
@article{Golland2024,
  author    = {Golland, Alexander},
  title     = {Datenschutz beim Einsatz k{\"u}nstlicher Intelligenz im Unternehmen},
  series = {NWB},
  journal   = {NWB},
  number    = {6},
  publisher = {NWB},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {425 -- 432},
  year      = {2024},
  abstract  = {Seit Ende 2022 pr{\"a}gt das Schlagwort „K{\"u}nstliche Intelligenz" (KI) nicht nur den rechtswissenschaftlichen Diskurs. Die allgemeine Verf{\"u}gbarkeit von generativen KI-Modellen, allen voran die großen Sprachmodelle (Large Language Models, kurz: LLM) wie ChatGPT von OpenAI oder Bing AI von Microsoft, erfreuen sich gr{\"o}ßter Beliebtheit: LLM sind in der Lage, auf Grundlage statistischer Methoden - eine entsprechende Schnittstelle (Interface) vorausgesetzt - auch technisch wenig versierten Nutzern verst{\"a}ndliche Antworten auf ihre Fragen zu liefern. Dabei werden nicht nur umfassend Nutzerdaten verarbeitet, sondern auch auf weitere personenbezogene Daten zugegriffen sowie neue Daten erzeugt. Der Beitrag geht der Frage nach, welche spezifischen datenschutzrechtlichen Herausforderungen sich f{\"u}r Unternehmen beim Einsatz solcher LLM stellen.},
  language  = {de}
}
@unpublished{SchmuellingGuetzlaffCzupalla2024,
  author    = {Schm{\"u}lling, Max and G{\"u}tzlaff, Joel and Czupalla, Markus},
  title     = {A thermal simulation environment for moving objects on the lunar surface},
  doi       = {10.21203/rs.3.rs-3902363/v1},
  pages     = {12 Seiten},
  year      = {2024},
  abstract  = {This paper presents a thermal simulation environment for moving objects on the lunar surface. The goal of the thermal simulation environment is to enable the reliable prediction of the temperature development of a given object on the lunar surface by providing the respective heat fluxes for a mission on a given travel path. The user can import any object geometry and freely define the path that the object should travel. Using the path of the object, the relevant lunar surface geometry is imported from a digital elevation model. The relevant parts of the lunar surface are determined based on distance to the defined path. A thermal model of these surface sections is generated, consisting of a porous layer on top and a denser layer below. The object is moved across the lunar surface, and its inclination is adapted depending on the slope of the terrain below it. Finally, a transient thermal analysis of the object and its environment is performed at several positions on its path and the results are visualized. The paper introduces details on the thermal modeling of the lunar surface, as well as its verification. Furthermore, the structure of the created software is presented. The robustness of the environment is verified with the help of sensitivity studies and possible improvements are presented.},
  language  = {en}
}
@article{SchopenNarayanBeckmannetal.2024,
  author    = {Schopen, Oliver and Narayan, Sriram and Beckmann, Marvin and Najmi, Aezid-Ul-Hassan and Esch, Thomas and Shabani, Bahman},
  title     = {An EIS approach to quantify the effects of inlet air relative humidity on the performance of proton exchange membrane fuel cells: a pathway to developing a novel fault diagnostic method},
  series = {International Journal of Hydrogen Energy},
  volume    = {58},
  journal   = {International Journal of Hydrogen Energy},
  number    = {8},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0360-3199 (print)},
  issn      = {1879-3487 (online)},
  doi       = {10.1016/j.ijhydene.2024.01.218},
  pages     = {1302 -- 1315},
  year      = {2024},
  abstract  = {In this work, the effect of low air relative humidity on the operation of a polymer electrolyte membrane fuel cell is investigated. An innovative method through performing in situ electrochemical impedance spectroscopy is utilised to quantify the effect of inlet air relative humidity at the cathode side on internal ionic resistances and output voltage of the fuel cell. In addition, algorithms are developed to analyse the electrochemical characteristics of the fuel cell. For the specific fuel cell stack used in this study, the membrane resistance drops by over 39 \% and the cathode side charge transfer resistance decreases by 23 \% after increasing the humidity from 30 \% to 85 \%, while the results of static operation also show an increase of ∼2.2 \% in the voltage output after increasing the relative humidity from 30 \% to 85 \%. In dynamic operation, visible drying effects occur at < 50 \% relative humidity, whereby the increase of the air side stoichiometry increases the drying effects. Furthermore, other parameters, such as hydrogen humidification, internal stack structure, and operating parameters like stoichiometry, pressure, and temperature affect the overall water balance. Therefore, the optimal humidification range must be determined by considering all these parameters to maximise the fuel cell performance and durability. The results of this study are used to develop a health management system to ensure sufficient humidification by continuously monitoring the fuel cell polarisation data and electrochemical impedance spectroscopy indicators.},
  language  = {en}
}
@article{SchopenShahEschetal.2024,
  author    = {Schopen, Oliver and Shah, Neel and Esch, Thomas and Shabani, Bahman},
  title     = {Critical quantitative evaluation of integrated health management methods for fuel cell applications},
  series = {International Journal of Hydrogen Energy},
  volume    = {70},
  journal   = {International Journal of Hydrogen Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0360-3199},
  doi       = {10.1016/j.ijhydene.2024.05.156},
  pages     = {370 -- 388},
  year      = {2024},
  abstract  = {Online fault diagnostics is a crucial consideration for fuel cell systems, particularly in mobile applications, to limit downtime and degradation, and to increase lifetime. Guided by a critical literature review, in this paper an overview of Health management systems classified in a scheme is presented, introducing commonly utilised methods to diagnose FCs in various applications. In this novel scheme, various Health management system methods are summarised and structured to provide an overview of existing systems including their associated tools. These systems are classified into four categories mainly focused on model-based and non-model-based systems. The individual methods are critically discussed when used individually or combined aimed at further understanding their functionality and suitability in different applications. Additionally, a tool is introduced to evaluate methods from each category based on the scheme presented. This tool applies the technique of matrix evaluation utilising several key parameters to identify the most appropriate methods for a given application. Based on this evaluation, the most suitable methods for each specific application are combined to build an integrated Health management system.},
  language  = {en}
}
@techreport{BirmansTamborninoUllrich2024,
  type      = {Working Paper},
  author    = {Birmans, Katrin and Tambornino, Philipp and Ullrich, Anna Valentine},
  title     = {Bevor Sie Coscine nutzen - Handreichung f{\"u}r Forschende an HAW},
  doi       = {10.5281/zenodo.12158546},
  pages     = {2 Seiten},
  year      = {2024},
  abstract  = {Um die Forschungsdatenmanagement-Plattform Coscine optimal f{\"u}r Forschungsprojekte nutzen zu k{\"o}nnen, ist es sinnvoll, einige Fragen im Vorhinein zu kl{\"a}ren. So k{\"o}nnen aufwendige {\"A}nderungen der Datenverwaltung im Nachhinein vermieden werden. Hierzu bietet die Handreichung hilfreiche Leitfragen und Erl{\"a}uterungen f{\"u}r Forschende und FDM-Service-Personal an HAW in NRW (DH.NRW-Hochschulen). FDM-Service-Mitarbeitende k{\"o}nnen die Handreichung in ihrer Beratung zu Coscine einsetzen und mit der Eingabemaske in der Kopfzeile des Dokuments auf ihre Hochschule anpassen.},
  language  = {de}
}
@techreport{HoffmannUllrich2024,
  type      = {Working Paper},
  author    = {Hoffmann, Sarah and Ullrich, Anna Valentine},
  title     = {30 Minuten FDM f{\"u}r HAW. Ein Informationsformat f{\"u}r Forschende an HAW in NRW},
  doi       = {10.5281/zenodo.12569282},
  pages     = {1 Seite},
  year      = {2024},
  abstract  = {Wie kann man das Thema Forschungsdatenmanagement (FDM) konkret und anwendbar f{\"u}r Forschende gestalten, die bisher noch wenig Kontakt damit hatten? Auf diese Frage gibt das Konzept „30 Minuten FDM f{\"u}r HAW. Ein Informationsformat f{\"u}r Forschende an HAW in NRW" eine Antwort. Es entstand als Projektarbeit im Zertifikatskurs Forschungsdatenmanagement 2023/24},
  language  = {de}
}
@article{AliaziziOezsoyluBakhshiSichanietal.2024,
  author    = {Aliazizi, Fereshteh and {\"O}zsoylu, Dua and Bakhshi Sichani, Soroush and Khorshid, Mehran and Glorieux, Christ and Robbens, Johan and Sch{\"o}ning, Michael Josef and Wagner, Patrick},
  title     = {Development and Calibration of a Microfluidic, Chip-Based Sensor System for Monitoring the Physical Properties of Water Samples in Aquacultures},
  series = {Micromachines},
  volume    = {15},
  journal   = {Micromachines},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2072-666X},
  doi       = {10.3390/mi15060755},
  year      = {2024},
  abstract  = {In this work, we present a compact, bifunctional chip-based sensor setup that measures the temperature and electrical conductivity of water samples, including specimens from rivers and channels, aquaculture, and the Atlantic Ocean. For conductivity measurements, we utilize the impedance amplitude recorded via interdigitated electrode structures at a single triggering frequency. The results are well in line with data obtained using a calibrated reference instrument. The new setup holds for conductivity values spanning almost two orders of magnitude (river versus ocean water) without the need for equivalent circuit modelling. Temperature measurements were performed in four-point geometry with an on-chip platinum RTD (resistance temperature detector) in the temperature range between 2 °C and 40 °C, showing no hysteresis effects between warming and cooling cycles. Although the meander was not shielded against the liquid, the temperature calibration provided equivalent results to low conductive Milli-Q and highly conductive ocean water. The sensor is therefore suitable for inline and online monitoring purposes in recirculating aquaculture systems.},
  language  = {en}
}
@article{ThomaGardiFisheretal.2024,
  author    = {Thoma, Andreas and Gardi, Alessandro and Fisher, Alex and Braun, Carsten},
  title     = {Improving local path planning for UAV flight in challenging environments by refining cost function weights},
  series = {CEAS Aeronautical Journal},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Wien},
  issn      = {1869-5590 (eISSN)},
  doi       = {10.1007/s13272-024-00741-x},
  pages     = {12 Seiten},
  year      = {2024},
  abstract  = {Unmanned Aerial Vehicles (UAV) constantly gain in versatility. However, more reliable path planning algorithms are required until full autonomous UAV operation is possible. This work investigates the algorithm 3DVFH* and analyses its dependency on its cost function weights in 2400 environments. The analysis shows that the 3DVFH* can find a suitable path in every environment. However, a particular type of environment requires a specific choice of cost function weights. For minimal failure, probability interdependencies between the weights of the cost function have to be considered. This dependency reduces the number of control parameters and simplifies the usage of the 3DVFH*. Weights for costs associated with vertical evasion (pitch cost) and vicinity to obstacles (obstacle cost) have the highest influence on the failure probability of the local path planner. Environments with mainly very tall buildings (like large American city centres) require a preference for horizontal avoidance manoeuvres (achieved with high pitch cost weights). In contrast, environments with medium-to-low buildings (like European city centres) benefit from vertical avoidance manoeuvres (achieved with low pitch cost weights). The cost of the vicinity to obstacles also plays an essential role and must be chosen adequately for the environment. Choosing these two weights ideal is sufficient to reduce the failure probability below 10\%.},
  language  = {en}
}
@article{PogorelovaRogachevAkimbekovetal.2024,
  author    = {Pogorelova, Natalia and Rogachev, Evgeniy and Akimbekov, Nuraly S. and Digel, Ilya},
  title     = {Effect of dehydration method on the micro- and nanomorphological properties of bacterial cellulose produced by Medusomyces gisevii on different substrates},
  series = {Journal of materials science},
  volume    = {2024},
  journal   = {Journal of materials science},
  publisher = {Springer Science + Business Media},
  address   = {Dordrecht},
  issn      = {1573-4803 (Online)},
  doi       = {10.1007/s10853-024-09596-3},
  pages     = {13 Seiten},
  year      = {2024},
  abstract  = {Many important properties of bacterial cellulose (BC), such as moisture absorption capacity, elasticity and tensile strength, largely depend on its structure. This paper presents a study on the effect of the drying method on BC films produced by Medusomyces gisevii using two different procedures: room temperature drying (RT, (24 ± 2 °C, humidity 65 ± 1\%, dried until a constant weight was reached) and freeze-drying (FD, treated at - 75 °C for 48 h). BC was synthesized using one of two different carbon sources—either glucose or sucrose. Structural differences in the obtained BC films were evaluated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and X-ray diffraction. Macroscopically, the RT samples appeared semi-transparent and smooth, whereas the FD group exhibited an opaque white color and sponge-like structure. SEM examination showed denser packing of fibrils in FD samples while RT-samples displayed smaller average fiber diameter, lower surface roughness and less porosity. AFM confirmed the SEM observations and showed that the FD material exhibited a more branched structure and a higher surface roughness. The samples cultivated in a glucose-containing nutrient medium, generally displayed a straight and ordered shape of fibrils compared to the sucrose-derived BC, characterized by a rougher and wavier structure. The BC films dried under different conditions showed distinctly different crystallinity degrees, whereas the carbon source in the culture medium was found to have a relatively small effect on the BC crystallinity.},
  language  = {en}
}
@article{TixMollKrafftetal.2024,
  author    = {Tix, Julian and Moll, Fabian and Krafft, Simone and Betsch, Matthias and Tippk{\"o}tter, Nils},
  title     = {Hydrogen production from enzymatic pretreated organic waste with thermotoga neapolitana},
  series = {Energies},
  volume    = {17},
  journal   = {Energies},
  number    = {12},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en17122938},
  pages     = {20 Seiten},
  year      = {2024},
  abstract  = {Biomass from various types of organic waste was tested for possible use in hydrogen production. The composition consisted of lignified samples, green waste, and kitchen scraps such as fruit and vegetable peels and leftover food. For this purpose, the enzymatic pretreatment of organic waste with a combination of five different hydrolytic enzymes (cellulase, amylase, glucoamylase, pectinase and xylase) was investigated to determine its ability to produce hydrogen (H2) with the hydrolyzate produced here. In course, the anaerobic rod-shaped bacterium T. neapolitana was used for H2 production. First, the enzymes were investigated using different substrates in preliminary experiments. Subsequently, hydrolyses were carried out using different types of organic waste. In the hydrolysis carried out here for 48 h, an increase in glucose concentration of 481\% was measured for waste loads containing starch, corresponding to a glucose concentration at the end of hydrolysis of 7.5 g·L-1. In the subsequent set fermentation in serum bottles, a H2 yield of 1.26 mmol H2 was obtained in the overhead space when Terrific Broth Medium with glucose and yeast extract (TBGY medium) was used. When hydrolyzed organic waste was used, even a H2 yield of 1.37 mmol could be achieved in the overhead space. In addition, a dedicated reactor system for the anaerobic fermentation of T. neapolitana to produce H2 was developed. The bioreactor developed here can ferment anaerobically with a very low loss of produced gas. Here, after 24 h, a hydrogen concentration of 83\% could be measured in the overhead space.},
  language  = {en}
}
@article{OehlenschlaegerVolkmarStiefelmaieretal.2024,
  author    = {Oehlenschl{\"a}ger, Katharina and Volkmar, Marianne and Stiefelmaier, Judith and Langsdorf, Alexander and Holtmann, Dirk and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {New insights into the influence of pre-culture on robust solvent production of C. acetobutylicum},
  series = {Applied Microbiology and Biotechnology},
  volume    = {108},
  journal   = {Applied Microbiology and Biotechnology},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1432-0614},
  doi       = {10.1007/s00253-023-12981-8},
  pages     = {10 Seiten},
  year      = {2024},
  abstract  = {Clostridia are known for their solvent production, especially the production of butanol. Concerning the projected depletion of fossil fuels, this is of great interest. The cultivation of clostridia is known to be challenging, and it is difficult to achieve reproducible results and robust processes. However, existing publications usually concentrate on the cultivation conditions of the main culture. In this paper, the influence of cryo-conservation and pre-culture on growth and solvent production in the resulting main cultivation are examined. A protocol was developed that leads to reproducible cultivations of Clostridium acetobutylicum. Detailed investigation of the cell conservation in cryo-cultures ensured reliable cell growth in the pre-culture. Moreover, a reason for the acid crash in the main culture was found, based on the cultivation conditions of the pre-culture. The critical parameter to avoid the acid crash and accomplish the shift to the solventogenesis of clostridia is the metabolic phase in which the cells of the pre-culture were at the time of inoculation of the main culture; this depends on the cultivation time of the pre-culture. Using cells from the exponential growth phase to inoculate the main culture leads to an acid crash. To achieve the solventogenic phase with butanol production, the inoculum should consist of older cells which are in the stationary growth phase. Considering these parameters, which affect the entire cultivation process, reproducible results and reliable solvent production are ensured.},
  language  = {en}
}
@masterthesis{Dankelmann2024,
  type      = {Bachelor Thesis},
  author    = {Dankelmann, Florian},
  title     = {Almanya : kulinarische Br{\"u}cken und Soziale Bindungen der t{\"u}rkischen Diaspora in Deutschland},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {93 Seiten},
  year      = {2024},
  abstract  = {Die fotografische Arbeit "Almanya" veranschaulicht Teilaspekte der t{\"u}rkischen Kultur anhand von Repr{\"a}sentantinnen und Repr{\"a}sentanten der t{\"u}rkeist{\"a}mmigen Community in Deutschland. Mit einem Fokus auf Kulinarik und Formen des Zusammenlebens werden Menschen mit t{\"u}rkischen Wurzeln portr{\"a}tiert, sodass am Ende ein Einblick in deren Lebens- und Gedankenwelt erm{\"o}glicht wird und kulinarische Br{\"u}cken zwischen Deutschen und der t{\"u}rkischen Kultur gebaut werden. Die enthaltene Botschaft, welche das Projekt den Rezipient:innen {\"u}berbringt, ist in einem multikulturellen Land wie Deutschland von großer Wichtigkeit f{\"u}r gegenseitiges Verst{\"a}ndnis und bildet den Boden f{\"u}r ein harmonisches Miteinander.},
  language  = {de}
}
@article{GollandSchroeer2024,
  author    = {Golland, Alexander and Schr{\"o}er, Jan-Erik},
  title     = {No risk, no fun? Ber{\"u}cksichtigung datenschutzrechtlicher Risiken im Vergabeverfahren},
  series = {DSB Datenschutz-Berater},
  journal   = {DSB Datenschutz-Berater},
  number    = {5},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  isbn      = {0170-7256},
  issn      = {No risk, no fun? Ber{\"u}cksichtigung datenschutzrechtlicher Risiken im Vergabeverfahren},
  pages     = {114 -- 117},
  year      = {2024},
  language  = {de}
}
@techreport{Drescher2024,
  type      = {Working Paper},
  author    = {Drescher, Hans Paul},
  title     = {Critical review of the 1. Stokes' problem and consequences for mixed turbulent/laminar flow},
  pages     = {27 Seiten},
  year      = {2024},
  abstract  = {The "1. Stokes' problem", the "suddenly accelerated flat wall", is the oldest application of the Navier-Stokes equations. Stokes' solution of the "problem" does not comply with the mathematical theorem of Cauchy and Kowalewskaya on the "Uniqueness and Existence" of solutions of partial differential equations and violates the physical theorem of minimum entropy production/dissipation of the Thermodynamics of Irreversible Processes. The result includes very high local shear stresses and dissipation rates. That is of special interest for the theory of turbulent and mixed turbulent/laminar flow. A textbook solution of the "1. Stokes Problem" is the Couette flow, which has a constant sheer stress along a linear profile. A consequence is that the Navier-Stokes equations do not describe any S-shaped part of a turbulent profile found in any turbulent Couette experiment. The paper surveys arguments referring to that statement, concerning the history of >150 years. Contrary to this there is always a Navier-Stokes solution near the wall, observed by a linear part of the Couette profile. There a turbulent description (e.g. by the logarithmic law-of-the-wall) fails completely. That is explained by the minimum dissipation requirement together with the Couette feature τ = const. The local co-existence of a turbulent zone and a laminar zone near the wall is stable and observed also at high Reynolds-Numbers.},
  language  = {en}
}
@masterthesis{Breuer2024,
  type      = {Bachelor Thesis},
  author    = {Breuer, Annika},
  title     = {Climate Engineering : Entwicklung einer digitalen Plattform f{\"u}r Geoengineering-Methoden und Klimawandel-Daten},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {71 Seiten},
  year      = {2024},
  abstract  = {Dieses Projekt hat zum Ziel, umfassend {\"u}ber Climate Engineering-Maßnahmen zu informieren und dabei insbesondere ihre Funktionsweise, Kosten und Risiken darzustellen. Die entstandene Plattform "Die Erde abk{\"u}hlen!" bietet einen Einblick in die L{\"o}sungsans{\"a}tze des Climate Engineerings durch die Verwendung von Storytelling. Sie erm{\"o}glicht Nutzer:innen einen {\"U}berblick {\"u}ber den aktuellen Stand der Klimaerw{\"a}rmung sowie den Vergleich von Climate Engineering-Maßnahmen. Ein entwickeltes Bewertungssystem auf Grundlage der "Royal Society" sowie interaktive Infografiken geben Nutzer:innen einen umfassenden Einblick. Das Hauptziel des Projekts ist die digitale Transformation der Climate Engineering-L{\"o}sungsans{\"a}tze. Dabei geht es nicht nur darum, {\"u}ber die Folgen der Klimaerw{\"a}rmung zu informieren, sondern auch konkrete L{\"o}sungen aufzuzeigen. Durch die Entwicklung eines innovativen Storytellings wird die Thematik nicht nur dramaturgisch pr{\"a}sentiert, sondern erm{\"o}glicht es den Nutzer:innen auch, ihre eigene Wissensvertiefung zu steuern.},
  language  = {de}
}
@article{YoshinobuMiyamotoWagneretal.2024,
  author    = {Yoshinobu, Tatsuo and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Field-effect sensors combined with the scanned light pulse technique: from artificial olfactory images to chemical imaging technologies},
  series = {Chemosensors},
  volume    = {12},
  journal   = {Chemosensors},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9040},
  doi       = {10.3390/chemosensors12020020},
  pages     = {Artikel 20},
  year      = {2024},
  abstract  = {The artificial olfactory image was proposed by Lundstr{\"o}m et al. in 1991 as a new strategy for an electronic nose system which generated a two-dimensional mapping to be interpreted as a fingerprint of the detected gas species. The potential distribution generated by the catalytic metals integrated into a semiconductor field-effect structure was read as a photocurrent signal generated by scanning light pulses. The impact of the proposed technology spread beyond gas sensing, inspiring the development of various imaging modalities based on the light addressing of field-effect structures to obtain spatial maps of pH distribution, ions, molecules, and impedance, and these modalities have been applied in both biological and non-biological systems. These light-addressing technologies have been further developed to realize the position control of a faradaic current on the electrode surface for localized electrochemical reactions and amperometric measurements, as well as the actuation of liquids in microfluidic devices.},
  language  = {en}
}
@masterthesis{Fleischer2024,
  type      = {Bachelor Thesis},
  author    = {Fleischer, Rebekka},
  title     = {Bringing brand experience to marketplaces : ein Online-Marktplatz, der Konsument und Marke verbindet},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {101 Seiten},
  year      = {2024},
  abstract  = {«Keno» zeigt ein Konzept f{\"u}r einen Online-Marktplatz im Fashion-Segment, mit Fokus auf individueller Beratung, digitaler Anprobe und visueller sowie informativer Pr{\"a}sentation der Marken. Marktpl{\"a}tze werden aufgrund von großer Auswahl und Vertrauensw{\"u}rdigkeit von Konsument:innen bevorzugt aufgesucht. Durch die immersive Darstellung an einem maßgetreuen Avatar und die Einbindung der Marke in das Einkaufserlebnis soll hier die Zahl der Retouren verringert und die Kund:innenzufriedenheit gesteigert werden. Mittels nutzerorientierter Strategien und der Gestaltung eines Designsystems bekam «Keno» seinen Look. Dabei fanden modernste Techniken wie k{\"u}nstliche Intelligenzen und Design Token Systeme Verwendung. Das Projekt zeigt letztendlich M{\"o}glichkeiten auf, wie ein Marktplatz durch Brand Experience, Onlineshopping-Wege verk{\"u}rzen und zu mehr Nachhaltigkeit im E-Commerce beitragen kann.},
  language  = {de}
}
@article{BertzSchoeningMolinnusetal.2024,
  author    = {Bertz, Morten and Sch{\"o}ning, Michael Josef and Molinnus, Denise and Homma, Takayuki},
  title     = {Influence of temperature, light, and H₂O₂ concentration on microbial spore inactivation: in-situ Raman spectroscopy combined with optical trapping},
  series = {Physica status solidi (a) applications and materials science},
  journal   = {Physica status solidi (a) applications and materials science},
  number    = {Early View},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {1862-6319 (Online)},
  doi       = {10.1002/pssa.202300866},
  pages     = {8 Seiten},
  year      = {2024},
  abstract  = {To gain insight on chemical sterilization processes, the influence of temperature (up to 70 °C), intense green light, and hydrogen peroxide (H₂O₂) concentration (up to 30\% in aqueous solution) on microbial spore inactivation is evaluated by in-situ Raman spectroscopy with an optical trap. Bacillus atrophaeus is utilized as a model organism. Individual spores are isolated and their chemical makeup is monitored under dynamically changing conditions (temperature, light, and H₂O₂ concentration) to mimic industrially relevant process parameters for sterilization in the field of aseptic food processing. While isolated spores in water are highly stable, even at elevated temperatures of 70 °C, exposure to H₂O₂ leads to a loss of spore integrity characterized by the release of the key spore biomarker dipicolinic acid (DPA) in a concentration-dependent manner, which indicates damage to the inner membrane of the spore. Intensive light or heat, both of which accelerate the decomposition of H₂O₂ into reactive oxygen species (ROS), drastically shorten the spore lifetime, suggesting the formation of ROS as a rate-limiting step during sterilization. It is concluded that Raman spectroscopy can deliver mechanistic insight into the mode of action of H₂O₂-based sterilization and reveal the individual contributions of different sterilization methods acting in tandem.},
  language  = {en}
}
@incollection{KraftKohlMeinecke2024,
  author    = {Kraft, Bodo and Kohl, Philipp and Meinecke, Matthias},
  title     = {Analyse und Nachverfolgung von Projektzielen durch Einsatz von Natural Language Processing},
  series = {KI in der Projektwirtschaft : was ver{\"a}ndert sich durch KI im Projektmanagement?},
  booktitle = {KI in der Projektwirtschaft : was ver{\"a}ndert sich durch KI im Projektmanagement?},
  editor    = {Bernert, Christian and Scheurer, Steffen and Wehnes, Harald},
  publisher = {UVK Verlag},
  isbn      = {978-3-3811-1132-9 (Online)},
  doi       = {10.24053/9783381111329},
  pages     = {157 -- 167},
  year      = {2024},
  language  = {de}
}
@incollection{Finkenberger2024,
  author    = {Finkenberger, Isabel Maria},
  title     = {Transformatives Handeln als disziplin{\"u}berschreitende, kollektive Aktion. Stadtentwicklung trifft k{\"u}nstlerische und kollaborative Handlungspraxen},
  series = {Por{\"o}s-Werden : geteilte R{\"a}ume, urbane Dramaturgien, performatives Kuratieren},
  booktitle = {Por{\"o}s-Werden : geteilte R{\"a}ume, urbane Dramaturgien, performatives Kuratieren},
  editor    = {B{\"u}scher, Barbara and Krasny, Elke and Ortmann, Lucie},
  publisher = {Turia + Kant},
  address   = {Wien},
  isbn      = {978-3-98514-543-0},
  pages     = {144 -- 158},
  year      = {2024},
  language  = {de}
}
@incollection{Ulke2024,
  author    = {Ulke, Bernd},
  title     = {Kalkulation},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_12},
  pages     = {801 -- 909},
  year      = {2024},
  abstract  = {Das Kapitel behandelt die Kosten- und Preisermittlung, die Kostenvorgabe und Kostenkontrolle. Der Angebotspreis wird aufgeschl{\"u}sselt in die Einzelkosten der Teilleistungen, die Baustellengemeinkosten, die Allgemeinen Gesch{\"a}ftskosten und einen Zuschlag f{\"u}r Wagnis und Gewinn. Auf der Basis der Angebotskalkulation werden die Vorgaben f{\"u}r die Kostenkontrolle entwickelt.},
  language  = {de}
}
@book{LaumannWolf2024,
  author    = {Laumann, J{\"o}rg and Wolf, Christian},
  title     = {Stahlbau 1 : Bemessung von Stahlbauten nach Eurocode mit zahlreichen Beispielen},
  edition   = {26., {\"u}berarbeitete und aktualisierte Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41323-1 (Print)},
  doi       = {10.1007/978-3-658-41324-8},
  pages     = {XVI, 661 Seiten},
  year      = {2024},
  language  = {de}
}
@article{SchoenrockMuckeltHastermannetal.2024,
  author    = {Schoenrock, Britt and Muckelt, Paul E. and Hastermann, Maria and Albracht, Kirsten and MacGregor, Robert and Martin, David and Gunga, Hans-Christian and Salanova, Michele and Stokes, Maria J. and Warner, Martin B. and Blottner, Dieter},
  title     = {Muscle stiffness indicating mission crew health in space},
  series = {Scientific Reports},
  volume    = {14},
  journal   = {Scientific Reports},
  number    = {Article number: 4196},
  publisher = {Springer Nature},
  address   = {London},
  issn      = {2045-2322},
  doi       = {10.1038/s41598-024-54759-6},
  pages     = {13 Seiten},
  year      = {2024},
  abstract  = {Muscle function is compromised by gravitational unloading in space affecting overall musculoskeletal health. Astronauts perform daily exercise programmes to mitigate these effects but knowing which muscles to target would optimise effectiveness. Accurate inflight assessment to inform exercise programmes is critical due to lack of technologies suitable for spaceflight. Changes in mechanical properties indicate muscle health status and can be measured rapidly and non-invasively using novel technology. A hand-held MyotonPRO device enabled monitoring of muscle health for the first time in spaceflight (> 180 days). Greater/maintained stiffness indicated countermeasures were effective. Tissue stiffness was preserved in the majority of muscles (neck, shoulder, back, thigh) but Tibialis Anterior (foot lever muscle) stiffness decreased inflight vs. preflight (p < 0.0001; mean difference 149 N/m) in all 12 crewmembers. The calf muscles showed opposing effects, Gastrocnemius increasing in stiffness Soleus decreasing. Selective stiffness decrements indicate lack of preservation despite daily inflight countermeasures. This calls for more targeted exercises for lower leg muscles with vital roles as ankle joint stabilizers and in gait. Muscle stiffness is a digital biomarker for risk monitoring during future planetary explorations (Moon, Mars), for healthcare management in challenging environments or clinical disorders in people on Earth, to enable effective tailored exercise programmes.},
  language  = {en}
}
@inproceedings{WittigRuettersBragard2024,
  author    = {Wittig, M. and R{\"u}tters, Ren{\´e} and Bragard, Michael},
  title     = {Application of RL in control systems using the example of a rotatory inverted pendulum},
  series = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  booktitle = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-02-3},
  doi       = {10.33968/2024.53},
  pages     = {241 -- 248},
  year      = {2024},
  abstract  = {In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.},
  language  = {en}
}
@article{ZhenLiangStaatetal.2024,
  author    = {Zhen, Manghao and Liang, Yunpei and Staat, Manfred and Li, Quanqui and Li, Jianbo},
  title     = {Discontinuous fracture behaviors and constitutive model of sandstone specimens containing non-parallel prefabricated fissures under uniaxial compression},
  series = {Theoretical and Applied Fracture Mechanics},
  volume    = {131},
  journal   = {Theoretical and Applied Fracture Mechanics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-8442},
  doi       = {10.1016/j.tafmec.2024.104373},
  pages     = {Artikel 104373},
  year      = {2024},
  abstract  = {The deformation and damage laws of non-homogeneous irregular structural planes in rocks are the basis for studying the stability of rock engineering. To investigate the damage characteristics of rock containing non-parallel fissures, uniaxial compression tests and numerical simulations were conducted on sandstone specimens containing three non-parallel fissures inclined at 0°, 45° and 90° in this study. The characteristics of crack initiation and crack evolution of fissures with different inclinations were analyzed. A constitutive model for the discontinuous fractures of fissured sandstone was proposed. The results show that the fracture behaviors of fissured sandstone specimens are discontinuous. The stress-strain curves are non-smooth and can be divided into nonlinear crack closure stage, linear elastic stage, plastic stage and brittle failure stage, of which the plastic stage contains discontinuous stress drops. During the uniaxial compression test, the middle or ends of 0° fissures were the first to crack compared to 45° and 90° fissures. The end with small distance between 0° and 45° fissures cracked first, and the end with large distance cracked later. After the final failure, 0° fissures in all specimens were fractured, while 45° and 90° fissures were not necessarily fractured. Numerical simulation results show that the concentration of compressive stress at the tips of 0°, 45° and 90° fissures, as well as the concentration of tensile stress on both sides, decreased with the increase of the inclination angle. A constitutive model for the discontinuous fractures of fissured sandstone specimens was derived by combining the logistic model and damage mechanic theory. This model can well describe the discontinuous drops of stress and agrees well with the whole processes of the stress-strain curves of the fissured sandstone specimens.},
  language  = {en}
}
@misc{Huening2024,
  author    = {H{\"u}ning, Felix},
  title     = {Positionssensorvorrichtung},
  year      = {2024},
  abstract  = {Die Erfindung betrifft eine Positionssensorvorrichtung zur Bestimmung einer Absolutposition eines beweglichen ersten Teils relativ zu einem ortsfesten zweiten Teil mit einem mit dem beweglichen ersten Teil gekoppelter Codek{\"o}rper, der dazu eingerichtet ist, eine Codespur mit einer Mehrzahl von in Spurrichtung aufeinanderfolgenden Codeelementen zu enthalten zur Bildung eines Codewortes, mit einer magnetischen Detektionseinrichtung zur Detektion der Codespur, wobei die Detektionseinrichtung zum einen an dem Codek{\"o}rper befestigte und entlang der Spurrichtung in einem solchen Abstand gegenpolig zueinander angeordnete Permanentmagneten aufweist, dass der Abstand mit einer vorgegebenen L{\"a}nge der jeweiligen Codeelemente {\"u}bereinstimmt, und zum anderen eine Anzahl von ortsfest und quer zu dem Codek{\"o}rper versetzt angeordnete Wiegandsensoren aufweist, wobei der Abstand des Wiegandsensors zu einer Erstreckungsebene der Permanentmagneten derart gew{\"a}hlt ist, dass bei {\"U}berdeckung des Wiegandsensors durch den Permanentmagneten ein Wiegandpuls in dem Wiegandsensor induziert wird.},
  language  = {de}
}
@incollection{RickerUlke2024,
  author    = {Ricker, Marcus and Ulke, Bernd},
  title     = {Baustoffe},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_2},
  pages     = {61 -- 148},
  year      = {2024},
  abstract  = {In diesem Kapitel werden die Eigenschaften der Baustoffe Bitumen, Beton und Mauerwerk insbesondere unter dem Aspekt der Anwendung im Baustellenbetrieb dargestellt.},
  language  = {de}
}
@incollection{Ulke2024,
  author    = {Ulke, Bernd},
  title     = {Privates Baurecht und Nachtragsmanagement},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_3},
  pages     = {149 -- 216},
  year      = {2024},
  abstract  = {Kein Bauvorhaben sollte realisiert werden, ohne dass es auf einer vertraglichen Grundlage zwischen Auftraggeber und Auftragnehmer fußt. Diese vertragliche Grundlage zu kennen ist essenziell, um dementsprechend handeln zu k{\"o}nnen. Denn nur wer seine eigenen Rechte und auch Pflichten kennt, kann sich auf diese berufen.},
  language  = {de}
}
@incollection{Ulke2024,
  author    = {Ulke, Bernd},
  title     = {{\"O}ffentliches Baurecht, Ausschreibung und Vergabe},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_5},
  pages     = {263 -- 297},
  year      = {2024},
  abstract  = {Durch das {\"o}ffentliche Baurecht werden die Zul{\"a}ssigkeit, die Grenzen, die Ordnung und die F{\"o}rderung der baulichen Nutzung des Bodens geregelt. Die Ausschreibung und die Vergabe sind von essenzieller Bedeutung f{\"u}r ein Bauvorhaben und werden deshalb in der HOAI mit zwei Leistungsphasen abgebildet: n{\"a}mlich mit der Leistungsphase 6 Vorbereitung der Vergabe sowie der Leistungsphase 7 Mitwirkung bei der Vergabe. Im Zuge der Ausschreibung und der Vergabe werden die f{\"u}r den AG anfallenden Kosten festgelegt und bilden somit die letzte gr{\"o}ßere Stellschraube f{\"u}r Preiseinsparungen.},
  language  = {de}
}
@incollection{KrauseUlke2024,
  author    = {Krause, Thomas and Ulke, Bernd},
  title     = {Bauabrechnung und Mengenermittlung},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_7},
  pages     = {333 -- 397},
  year      = {2024},
  abstract  = {n diesem Kapitel werden die Abrechnungsvorschriften wichtiger ATV kurz, aber umfassend zusammengestellt. Einigen Abrechnungsbestimmungen f{\"u}r Einzelleistungen, die keine Nebenleistungen sind ((siehe DIN 18299 und Abschnitt 4 der jeweiligen ATV), sind mit aufgenommen worden; die ATV enthalten jedoch weitergehende Festlegungen {\"u}ber Nebenleistungen und Besondere Leistungen. Im Anschluss folgen Hinweise zu den Toleranzen im Hochbau sowie im Straßenbau.},
  language  = {de}
}
@incollection{Krause2024,
  author    = {Krause, Thomas},
  title     = {Baumaschinen},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_8},
  pages     = {399 -- 498},
  year      = {2024},
  abstract  = {Die Leistungsermittlung und Bemessung von Baumaschinen f{\"u}r die folgenden Bereiche werden bearbeitet: Maschinen f{\"u}r den Betonbau, Hebezeuge, Maschinen f{\"u}r den Erdbau, Straßenbaumaschinen, R{\"u}ckbauger{\"a}te und Elemente der Baustelleneinrichtung.},
  language  = {de}
}
@incollection{Ulke2024,
  author    = {Ulke, Bernd},
  title     = {Boden, Baugrube, Verbau},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_9},
  pages     = {499 -- 658},
  year      = {2024},
  abstract  = {Die L{\"o}sung den Baugrund betreffender Fragestellungen beginnen i. d. R. mit der Durchf{\"u}hrung von Baugrunderkundungen, um alle notwendigen Parameter zu erhalten, die f{\"u}r die Planung und Durchf{\"u}hrung von Bauvorhaben notwendig sind. Im Folgenden werden die wichtigsten Erkundungen in Abh{\"a}ngigkeit der erforderlichen G{\"u}teklasse der Proben beschrieben und vorgestellt.},
  language  = {de}
}
@article{PieronekKleefeld2024,
  author    = {Pieronek, Lukas and Kleefeld, Andreas},
  title     = {On trajectories of complex-valued interior transmission eigenvalues},
  series = {Inverse problems and imaging : IPI},
  volume    = {18},
  journal   = {Inverse problems and imaging : IPI},
  number    = {2},
  publisher = {AIMS},
  address   = {Springfield, Mo},
  issn      = {1930-8337 (Print)},
  doi       = {10.3934/ipi.2023041},
  pages     = {480 -- 516},
  year      = {2024},
  abstract  = {This paper investigates the interior transmission problem for homogeneous media via eigenvalue trajectories parameterized by the magnitude of the refractive index. In the case that the scatterer is the unit disk, we prove that there is a one-to-one correspondence between complex-valued interior transmission eigenvalue trajectories and Dirichlet eigenvalues of the Laplacian which turn out to be exactly the trajectorial limit points as the refractive index tends to infinity. For general simply-connected scatterers in two or three dimensions, a corresponding relation is still open, but further theoretical results and numerical studies indicate a similar connection.},
  language  = {en}
}
@article{SchoppRohrbachLangeretal.2024,
  author    = {Schopp, Christoph and Rohrbach, Felix and Langer, Luc and Heuermann, Holger},
  title     = {Detection of welding wire length by active S11 measurement},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {0093-3813 (Print)},
  doi       = {10.1109/TPS.2024.3356659},
  pages     = {1 -- 6},
  year      = {2024},
  abstract  = {A novel method to determine the extruded length of a metallic wire for a directed energy deposition (DED) process using a microwave (MW) plasma jet with a straight-through wire feed is presented. The method is based on the relative comparison of the measured frequency response obtained by the large-signal scattering parameter (Hot-S) technique. In the practical working range, repeatability of less than 6\% for a nonactive plasma and 9\% for the active plasma state is found. Measurements are conducted with a focus on a simple solution to decrease the processing time and reduce the integration time of the process into the existing hardware. It is shown that monitoring a single frequency for magnitude and phase changes is sufficient to achieve good accuracy. A combination of different measurement values to determine the length is possible. The applicability to different diameter of the same material is shown as well as a contact detection of the wire and metallic substrate.},
  language  = {en}
}
@article{AdelsMonakhova2024,
  author    = {Adels, Klaudia and Monakhova, Yulia},
  title     = {Low-field NMR spectroscopic study of e-cigarettes: Is determination of only nicotine and organic carrier solvents possible?},
  series = {Microchemical Journal},
  volume    = {203},
  journal   = {Microchemical Journal},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1095-9149},
  doi       = {10.1016/j.microc.2024.110859},
  pages     = {9 Seiten},
  year      = {2024},
  abstract  = {Electronic cigarettes (e-cigarettes) have become popular worldwide with the market growing exponentially in some countries. The absence of product standards and safety regulations requires urgent development of analytical methodologies for the holistic control of the growing diversity of such products. An approach based on low-field nuclear magnetic resonance (LF-NMR) at 80 MHz is presented for the simultaneous determination of key parameters: carrier solvents (vegetable glycerine (VG), propylene glycol (PG) and water), total nicotine as well as free-base nicotine fraction. Moreover, qualitative and quantitative determination of fourteen weak organic acids deliberately added to enhance sensory characteristics of e-cigarettes was possible. In most cases these parameters can be rapidly and conveniently determined without using any sample manipulation such as dilution, extraction or derivatization steps. The method was applied for 37 authentic e-cigarettes samples. In particular, eight different organic acids with the content up to 56 mg/mL were detected. Due to its simplicity, the method can be used in routine regulatory control as well as to study release behaviour of nicotine and other e-cigarettes constituents in different products.},
  language  = {en}
}