@inproceedings{RosinMykoniouButenweg2017,
  author    = {Rosin, J. and Mykoniou, K. and Butenweg, Christoph},
  title     = {Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches},
  series = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  pages     = {1 -- 14},
  year      = {2017},
  abstract  = {Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.},
  language  = {en}
}
@article{Butenweg2017,
  author    = {Butenweg, Christoph},
  title     = {Die neue Erdbebenfibel. Neue Hilfsmittel f{\"u}r die Leichtbetonindustrie},
  series = {Tagungsband 61. Ulmer Beton Tage 2017},
  journal   = {Tagungsband 61. Ulmer Beton Tage 2017},
  year      = {2017},
  language  = {de}
}
@incollection{Dachwald2017,
  author    = {Dachwald, Bernd},
  title     = {Light propulsion systems for spacecraft},
  series = {Optical nano and micro actuator technology},
  booktitle = {Optical nano and micro actuator technology},
  editor    = {Knopf, George K. and Otani, Yukitoshi},
  publisher = {CRC Press},
  address   = {Boca Raton},
  isbn      = {9781315217628 (eBook)},
  pages     = {577 -- 598},
  year      = {2017},
  language  = {en}
}
@inproceedings{ValeroBungErpicumetal.2017,
  author    = {Valero, Daniel and Bung, Daniel Bernhard and Erpicum, Sebastien and Dewals, Benjamin},
  title     = {Numerical study of turbulent oscillations around a cylinder: RANS capabilities and sensitivity analysis},
  series = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  booktitle = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  issn      = {2521-716X},
  pages     = {3126 -- 3135},
  year      = {2017},
  language  = {en}
}
@book{GunnarBartonBeigeletal.2017,
  author    = {Gunnar, Auth and Barton, Thomas and Beigel, Stefan and Bensberg, Frank and Brehm, Lars and Wolf, Martin R.},
  title     = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017},
  editor    = {Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  publisher = {Mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {297 Seiten},
  year      = {2017},
  language  = {de}
}
@article{SavitskayaKistaubayevaDigeletal.2017,
  author    = {Savitskaya, I. S. and Kistaubayeva, A. S. and Digel, Ilya and Shokatayeva, D. H.},
  title     = {Physicochemical and Antibacterial Properties of Composite Films Based on Bacterial Cellulose and Chitosan for Wound Dressing Materials},
  series = {Eurasian Chemico-Technological Journal},
  volume    = {19},
  journal   = {Eurasian Chemico-Technological Journal},
  number    = {3},
  issn      = {2522-4867},
  doi       = {10.18321/ectj670},
  pages     = {255 -- 264},
  year      = {2017},
  language  = {en}
}
@inproceedings{WolfKoenig2017,
  author    = {Wolf, Martin R. and K{\"o}nig, Johannes Alexander},
  title     = {Competence Developing Games - Ein {\"U}berblick},
  series = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  booktitle = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  editor    = {Eibl, Maximilian and Gaedke, Martin},
  organization    = {Gesellschaft f{\"u}r Informatik},
  isbn      = {978-3-88579-669-5},
  doi       = {10.18420/in2017_32},
  pages     = {385 -- 391},
  year      = {2017},
  abstract  = {Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu {\"u}berf{\"u}hren. In diesem Artikel wird der {\"U}berbegriff „Competence Developing Games" definiert und anhand von Beispielen erl{\"a}utert. Daf{\"u}r werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erl{\"a}utert und eine Zuordnung durch-gef{\"u}hrt.},
  language  = {de}
}
@book{LabischWaehlisch2017,
  author    = {Labisch, Susanna and W{\"a}hlisch, Georg},
  title     = {Technisches Zeichnen: Eigenst{\"a}ndig lernen und effektiv {\"u}ben},
  edition   = {5. {\"u}berarbeitete Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-18312-7},
  doi       = {10.1007/978-3-658-18313-4},
  pages     = {XI, 300 Seiten ; Illustrationen},
  year      = {2017},
  language  = {de}
}
@techreport{DigelKayser2017,
  author    = {Digel, Ilya and Kayser, Peter},
  title     = {VirEx - Eliminierung von Quarant{\"a}ne relevanten Viroiden aus Kulturpflanzen Abschlussbericht des Projektes KMU-innovativ-12: Teilprojekt 3},
  publisher = {Institut f{\"u}r Bioengineering (IfB) der FH Aachen},
  address   = {Aachen},
  doi       = {10.2314/GBV:1012136345},
  year      = {2017},
  language  = {de}
}
@inproceedings{GrundmannBodenCeriottietal.2017,
  author    = {Grundmann, Jan Thimo and Boden, Ralf and Ceriotti, Matteo and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Lange, Caroline and Lichtenheldt, Roy and Pelivan, Ivanka and Peloni, Alessandro and Riemann, Johannes and Spr{\"o}witz, Tom and Tardivel, Simon},
  title     = {Soil to sail-asteroid landers on near-term sailcraft as an evolution of the GOSSAMER small spacecraft solar sail concept for in-situ characterization},
  series = {5th IAA Planetary Defense Conference},
  booktitle = {5th IAA Planetary Defense Conference},
  pages     = {30 Seiten},
  year      = {2017},
  language  = {en}
}
@article{ValeroBung2017,
  author    = {Valero, Daniel and Bung, Daniel Bernhard},
  title     = {Artificial Neural Networks and pattern recognition for air-water flow velocity estimation using a single-tip optical fibre probe},
  series = {Journal of Hydro-environment Research},
  volume    = {19},
  journal   = {Journal of Hydro-environment Research},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1570-6443},
  doi       = {10.1016/j.jher.2017.08.004},
  pages     = {150 -- 159},
  year      = {2017},
  language  = {en}
}
@incollection{Butenweg2017,
  author    = {Butenweg, Christoph},
  title     = {Passt, wackelt und hat Luft: Mauerwerksbauten aus Leichtbeton in Erdbebengebieten},
  series = {Beton-Bauteile, 65. Ausgabe (2017): Entwerfen - Planen - Ausf{\"u}hren},
  booktitle = {Beton-Bauteile, 65. Ausgabe (2017): Entwerfen - Planen - Ausf{\"u}hren},
  publisher = {Bauverl.},
  address   = {G{\"u}tersloh},
  isbn      = {978-3-7625-3676-5},
  pages     = {136 -- 140},
  year      = {2017},
  language  = {de}
}
@article{KleinButenwegKlinkel2017,
  author    = {Klein, Michel and Butenweg, Christoph and Klinkel, Sven},
  title     = {The Influence of Soil-Structure-Interaction on the Fatigue Analysis in the Foundation Design of Onshore Wind Turbines},
  series = {Procedia Engineering},
  volume    = {199},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2017.09.325},
  pages     = {3218 -- 3223},
  year      = {2017},
  language  = {en}
}
@article{KarnatakKantzBialonski2017,
  author    = {Karnatak, Rajat and Kantz, Holger and Bialonski, Stephan},
  title     = {Early warning signal for interior crises in excitable systems},
  series = {Physical Review E},
  volume    = {96},
  journal   = {Physical Review E},
  number    = {4},
  issn      = {2470-0053},
  doi       = {10.1103/PhysRevE.96.042211},
  pages     = {042211},
  year      = {2017},
  language  = {en}
}
@inproceedings{SchlemmerPorstBassametal.2017,
  author    = {Schlemmer, Katharina and Porst, Dariusz and Bassam, Rasha and Artmann, Gerhard and Digel, Ilya},
  title     = {Effects of nitric oxide (NO) and ATP on red blood cell phenotype and deformability},
  series = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  booktitle = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  editor    = {Erni, Daniel and Fischerauer, Alice and Himmel, J{\"o}rg and Seeger, Thomas and Thelen, Klaus},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-9814801-9-1},
  doi       = {10.17185/duepublico/43984},
  pages     = {100 -- 101},
  year      = {2017},
  language  = {en}
}
@incollection{FinkenbergerBaumeister2017,
  author    = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria},
  title     = {Working in between : Die Stadt von der anderen Seite sehen : Where Urban Planning Meets Artistic Practice},
  series = {New Stakeholders of Urban Change : A Question of Culture and Attitude?. - (Perspectives in Metropolitan Research ; IV)},
  booktitle = {New Stakeholders of Urban Change : A Question of Culture and Attitude?. - (Perspectives in Metropolitan Research ; IV)},
  editor    = {Berger, Hilke Marit and Ziemer, Gesa},
  publisher = {JOVIS Verlag},
  address   = {Berlin},
  isbn      = {978-3-86859-487-4},
  pages     = {119 -- 129},
  year      = {2017},
  language  = {de}
}
@incollection{PieperWaehlisch2017,
  author    = {Pieper, Martin and W{\"a}hlisch, Georg},
  title     = {Mehrwert von E-Learning durch f{\"a}cher{\"u}bergreifenden Einsatz},
  series = {Teaching is Touching the Future \& ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Pr{\"u}fen},
  booktitle = {Teaching is Touching the Future \& ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Pr{\"u}fen},
  publisher = {UVW Universit{\"a}tsverlag Webler},
  address   = {Bielefeld},
  isbn      = {978-3-946017-05-9},
  pages     = {193 -- 196},
  year      = {2017},
  language  = {de}
}
@inproceedings{Dachwald2017,
  author    = {Dachwald, Bernd},
  title     = {Radiation pressure force model for an ideal laser-enhanced solar sail},
  series = {4th International Symposium on Solar Sailing},
  booktitle = {4th International Symposium on Solar Sailing},
  pages     = {1 -- 5},
  year      = {2017},
  abstract  = {The concept of a laser-enhanced solar sail is introduced and the radiation pressure force model for an ideal laser-enhanced solar sail is derived. A laser-enhanced solar sail is a "traditional" solar sail that is, however, not solely propelled by solar radiation, but additionally by a laser beam that illuminates the sail. The additional laser radiation pressure increases the sail's propulsive force and can give, depending on the location of the laser source, more control authority over the direction of the solar sail's propulsive force vector. This way, laser-enhanced solar sails may augment already existing solar sail mission concepts and make novel mission concepts feasible.},
  language  = {en}
}
@misc{HacklWegmannKahmannetal.2017,
  author    = {Hackl, Michael and Wegmann, Kilian and Kahmann, Stephanie Lucina and Heinze, Nicolai and Staat, Manfred and Neiss, Wolfram F. and Scaal, Martin and M{\"u}ller, Lars P.},
  title     = {Reply to the letter to the editor: shortening osteotomy of the proximal radius},
  series = {Knee Surgery, Sports Traumatology, Arthroscopy},
  volume    = {25},
  journal   = {Knee Surgery, Sports Traumatology, Arthroscopy},
  number    = {10},
  doi       = {10.1007/s00167-017-4666-8},
  pages     = {3328 -- 3329},
  year      = {2017},
  language  = {en}
}
@incollection{NiemuellerLakemeyerReuteretal.2017,
  author    = {Niemueller, T. and Lakemeyer, G. and Reuter, S. and Jeschke, S. and Ferrein, Alexander},
  title     = {Benchmarking of Cyber-Physical Systems in Industrial Robotics: The RoboCup Logistics League as a CPS Benchmark Blueprint},
  series = {Cyber-Physical Systems: Foundations, Principles and Applications},
  booktitle = {Cyber-Physical Systems: Foundations, Principles and Applications},
  publisher = {Academic Press},
  address   = {London},
  doi       = {10.1016/B978-0-12-803801-7.00013-4},
  pages     = {193 -- 207},
  year      = {2017},
  abstract  = {In the future, we expect manufacturing companies to follow a new paradigm that mandates more automation and autonomy in production processes. Such smart factories will offer a variety of production technologies as services that can be combined ad hoc to produce a large number of different product types and variants cost-effectively even in small lot sizes. This is enabled by cyber-physical systems that feature flexible automated planning methods for production scheduling, execution control, and in-factory logistics. During development, testbeds are required to determine the applicability of integrated systems in such scenarios. Furthermore, benchmarks are needed to quantify and compare system performance in these industry-inspired scenarios at a comprehensible and manageable size which is, at the same time, complex enough to yield meaningful results. In this chapter, based on our experience in the RoboCup Logistics League (RCLL) as a specific example, we derive a generic blueprint for how a holistic benchmark can be developed, which combines a specific scenario with a set of key performance indicators as metrics to evaluate the overall integrated system and its components.},
  language  = {de}
}