@book{JanzEblingGottschalketal.1999, author = {Janz, Norbert and Ebling, G{\"u}nther and Gottschalk, Sandra and Niggemann, Hiltrud}, title = {2nd Community Innovation Survey. 2nd Interim Report. Report prepared for Eurostat / Ebling, G. , S. Gottschalk, N. Janz und H. Niggemann}, publisher = {ZEW Zentrum f{\"u}r Europ{\"a}ische Wirtschaftsforschung}, address = {Mannheim}, year = {1999}, language = {en} } @book{JanzEblingGottschalketal.1999, author = {Janz, Norbert and Ebling, G{\"u}nther and Gottschalk, Sandra and Licht, Georg}, title = {Prospects of the German Economy: Innovation Activities in the Manufacturing Sector. Survey 1998 (English translation) / Janz, N., G. Ebling, S. Gottschalk, G. Licht und H. Niggemann}, publisher = {ZEW Zentrum f{\"u}r Europ{\"a}ische Wirtschaftsforschung}, address = {Mannheim}, year = {1999}, language = {en} } @book{JanzEblingGottschalketal.1999, author = {Janz, Norbert and Ebling, G{\"u}nther and Gottschalk, Sandra and Licht, Georg}, title = {Services in the Future. Innovation Activities in the Service Sector. Survey 1998 (English translation) / Janz, N., G. Ebling, S. Gottschalk, G. Licht und H. Niggemann}, publisher = {ZEW Zentrum f{\"u}r Europ{\"a}ische Wirtschaftsforschung}, address = {Mannheim}, year = {1999}, language = {en} } @book{JanzLichtEblingetal.1999, author = {Janz, Norbert and Licht, Georg and Ebling, G{\"u}nther and Niggemann, Hiltrud}, title = {Innovation in the Service Sector. Selected Facts and Some Policy Conclusions / Licht, G., G. Ebling, N. Janz, H. Niggemann}, publisher = {European Commission}, address = {Luxembourg}, year = {1999}, language = {en} } @article{StarkeDrews1994, author = {Starke, G{\"u}nther and Drews, P.}, title = {Le soudage au siecle de l'informatique}, series = {Souder. 18 (1994), H. 6}, journal = {Souder. 18 (1994), H. 6}, isbn = {0246-1900}, pages = {33 -- 44}, year = {1994}, language = {en} } @article{Starke1994, author = {Starke, G{\"u}nther}, title = {Welding in the century of information technology. Session 1}, series = {Welding in the World. 34 (1994), H. 9}, journal = {Welding in the World. 34 (1994), H. 9}, isbn = {0043-2288}, pages = {1 -- 20}, year = {1994}, language = {en} } @article{Blome1994, author = {Blome, Hans-Joachim}, title = {The scale of the universe: a unit of length}, series = {Comments on astrophysics. 17 (1994)}, journal = {Comments on astrophysics. 17 (1994)}, isbn = {0146-2970}, pages = {327 -- 335}, year = {1994}, language = {en} } @article{BlomeKundt1988, author = {Blome, Hans-Joachim and Kundt, Wolfgang}, title = {Leptonic jets from young stellar objects?}, series = {Astrophysics and Space Science. 148 (1988), H. 2}, journal = {Astrophysics and Space Science. 148 (1988), H. 2}, isbn = {0004-640X}, pages = {343 -- 361}, year = {1988}, language = {en} } @article{BlomeChuHoelletal.1988, author = {Blome, Hans-Joachim and Chu, Y. and Hoell, J and Priester, W.}, title = {On the observational discrimination of Friedmann-Lema{\^i}tre models}, series = {Large Scale Structures of the Universe: Proceedings of the 130th Symposium of the International Astronomical Union, dedicated to the memory of Marc A. Aaronson (1950-1987) held in Balatonfured, Hungary, June 15-20, 1987. Edited by Jean Audouze, Marie-Christine Pelletan and Sandor Szalay.}, journal = {Large Scale Structures of the Universe: Proceedings of the 130th Symposium of the International Astronomical Union, dedicated to the memory of Marc A. Aaronson (1950-1987) held in Balatonfured, Hungary, June 15-20, 1987. Edited by Jean Audouze, Marie-Christine Pelletan and Sandor Szalay.}, publisher = {Kluwer Academic Publishers}, address = {Dordrecht}, isbn = {90-277-2742-2}, pages = {517}, year = {1988}, language = {en} } @article{BlomeWilson2004, author = {Blome, Hans-Joachim and Wilson, Thomas L.}, title = {The entangled Universe}, series = {Relativistic Astrophysics and Cosmology, Proceedings of the 13th Course of the International School of Cosmic Ray Astrophysics, held in Erice, Italy, 2-14 June 2002 / edited by Maurice M. Shapiro ... [et al.]}, journal = {Relativistic Astrophysics and Cosmology, Proceedings of the 13th Course of the International School of Cosmic Ray Astrophysics, held in Erice, Italy, 2-14 June 2002 / edited by Maurice M. Shapiro ... [et al.]}, publisher = {World Scientific Publishing}, address = {New Jersey, NJ}, isbn = {981-238-727-7}, pages = {23 -- 38}, year = {2004}, language = {en} } @article{BlomeMashhoon1984, author = {Blome, Hans-Joachim and Mashhoon, B.}, title = {Quasi-normal oscillations of a Schwarzschild black hole}, series = {Physics Letters A. 100 (1984), H. 5}, journal = {Physics Letters A. 100 (1984), H. 5}, isbn = {0375-9601}, pages = {231 -- 234}, year = {1984}, language = {en} } @article{BlomeKundt1987, author = {Blome, Hans-Joachim and Kundt, W.}, title = {Hypersonic Jets from Young Stars in Molecular Clouds}, series = {Circumstellar matter : proceedings of the 122nd symposium of the Internat. Astronom. Union held in Heidelberg, FRG, June 23 - 27, 1986 / ed. by I. Appenzeller ...}, journal = {Circumstellar matter : proceedings of the 122nd symposium of the Internat. Astronom. Union held in Heidelberg, FRG, June 23 - 27, 1986 / ed. by I. Appenzeller ...}, publisher = {Reidel}, address = {Dordrecht u.a.}, isbn = {90-277-2511-X}, pages = {73 -- 74}, year = {1987}, language = {en} } @article{BlomePriester1987, author = {Blome, Hans-Joachim and Priester, Wolfgang}, title = {The problem of the primeval explosion: 'Big bang' or 'big bounce'? I}, series = {Sterne und Weltraum. 26 (1987)}, journal = {Sterne und Weltraum. 26 (1987)}, isbn = {0039-1263}, pages = {83 -- 89}, year = {1987}, language = {en} } @article{EschSalberWoltersetal.2002, author = {Esch, Thomas and Salber, Wolfgang and Wolters, Peter and Geiger, Jos{\´e} and Dilthey, Jochen}, title = {Synergies of variable valve actuation and direct injection}, series = {Direct injection SI engine technology 2002 : [SAE 2002 world congress, Detroit, Michigan, USA, March 4 - 7, 2002].}, journal = {Direct injection SI engine technology 2002 : [SAE 2002 world congress, Detroit, Michigan, USA, March 4 - 7, 2002].}, publisher = {Society of Automotive Engineers}, address = {Warrendale, Pa}, isbn = {0-7680-0961-8}, pages = {45 -- 53}, year = {2002}, language = {en} } @article{Esch1991, author = {Esch, Thomas}, title = {Optimized design of the lubrication system of modern combustion engines. Verbesserte Ausf{\"u}hrung von Schmierungssystemen bei modernen Verbrennungsmotoren}, isbn = {0148-7191}, doi = {10.4271/912407}, pages = {1 -- 11}, year = {1991}, language = {en} } @book{SchuermannMueller1994, author = {Sch{\"u}rmann, Wilhelm and M{\"u}ller, Christian Philipp}, title = {Temporary translation(s) - Sammlung Sch{\"u}rmann. Kunst der Gegenwart und Fotografie / Gestaltung der Seiten ...: Christian Philipp M{\"u}ller...}, publisher = {Ars Nicolai}, address = {Berlin}, isbn = {3-89479-067-9}, pages = {165 S. : {\"u}berw. Ill, graph. Darst.}, year = {1994}, language = {en} } @article{PietschmannVahs1996, author = {Pietschmann, Bernd P. and Vahs, Dietmar}, title = {Change Management - Wie Sie Ihr Unternehmen fit f{\"u}r die Zukunft machen. Teil 1: Erfolgsfaktoren von Ver{\"a}nderungsprozessen}, series = {News / ASU ; BJU : von Unternehmern f{\"u}r Unternehmer. Ausgabe Baden-W{\"u}rttemberg. 13 (1996), H. 5}, journal = {News / ASU ; BJU : von Unternehmern f{\"u}r Unternehmer. Ausgabe Baden-W{\"u}rttemberg. 13 (1996), H. 5}, pages = {76 -- 79}, year = {1996}, language = {en} } @article{PietschmannVahs1996, author = {Pietschmann, Bernd P. and Vahs, Dietmar}, title = {Change Management - Wie Sie Ihr Unternehmen fit f{\"u}r die Zukunft machen. Teil 2: Prozeßmanagement - Von starren Strukturen zu flexiblen Prozessen}, series = {News / ASU ; BJU : von Unternehmern f{\"u}r Unternehmer. Ausgabe Baden-W{\"u}rttemberg. 13 (1996), H. 6}, journal = {News / ASU ; BJU : von Unternehmern f{\"u}r Unternehmer. Ausgabe Baden-W{\"u}rttemberg. 13 (1996), H. 6}, pages = {84 -- 86}, year = {1996}, language = {en} } @article{GerhardtKramer1985, author = {Gerhardt, Hans Joachim and Kramer, C.}, title = {Aerodynamsiche RA-Optimierung}, series = {Zentralblatt fuer Industriebau. 31 (1985), H. 5}, journal = {Zentralblatt fuer Industriebau. 31 (1985), H. 5}, isbn = {0044-4227}, pages = {358 -- 362}, year = {1985}, language = {en} } @article{GerhardtKramerJanssen1985, author = {Gerhardt, Hans Joachim and Kramer, C. and Janssen, L.-J.}, title = {Flow studies of an open jet wind tunnel and comparison with closed and slotted walls}, pages = {7 -- 28}, year = {1985}, language = {en} } @article{GerhardtCooperWhitbreadetal.1985, author = {Gerhardt, Hans Joachim and Cooper, K.-R. and Whitbread, R. and Gary, K.-P. (u.a.)}, title = {A comparison of aerodynamic drag measurements on model trucks in closed-jet and open-jet wind tunnels}, pages = {261 -- 274}, year = {1985}, language = {en} } @article{PietschmannRuhtz2001, author = {Pietschmann, Bernd P. and Ruhtz, Vanessa}, title = {Knowledge Management}, series = {Personal : Zeitschrift f{\"u}r Human Resource Management. 53 (2001), H. 5}, journal = {Personal : Zeitschrift f{\"u}r Human Resource Management. 53 (2001), H. 5}, isbn = {0031-5605}, pages = {242 -- 249}, year = {2001}, language = {en} } @article{BienerBethkeSasseetal.2003, author = {Biener, Ernst and Bethke, H. and Sasse, T. and Wernhoff, T.}, title = {Alternative landfill capping using locally available recycled material}, series = {Land contamination \& reclamation. 14 (2003), H. 4}, journal = {Land contamination \& reclamation. 14 (2003), H. 4}, isbn = {0967-0513}, pages = {419 -- 427}, year = {2003}, language = {en} } @article{BienerSasseWernhoff2003, author = {Biener, Ernst and Sasse, T. and Wernhoff, T.}, title = {Using harbour dredged material for combination sealing of the former Bockhorner Weg disposal site in Bremen, Germany}, series = {Proceedings of the International Harbour Congress. 13 (2003)}, journal = {Proceedings of the International Harbour Congress. 13 (2003)}, pages = {101 -- 109}, year = {2003}, language = {en} } @article{Hirschberg1994, author = {Hirschberg, Rainer}, title = {Computer-Aided-Engineering in der Technischen Geb{\"a}udeausr{\"u}stung}, series = {computer spezial (1994)}, journal = {computer spezial (1994)}, pages = {32 -- 37}, year = {1994}, language = {en} } @article{Hoettges1990, author = {H{\"o}ttges, J{\"o}rg}, title = {Turbulence and Mixing Mechanics in Compound Open Channel Flow / Arnold, Uwe; H{\"o}ttges, J{\"o}rg; Rouv{\´e}, Gerhard}, series = {On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten}, journal = {On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten}, publisher = {Delft Hydraulics}, address = {Delft}, year = {1990}, language = {en} } @article{HoettgesArnoldRouve1992, author = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard}, title = {Profiles of Mixing Coefficient in Compound Open Channel}, series = {Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]}, journal = {Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]}, publisher = {Hemisphere Publ. Corp.}, address = {Washington, DC [u.a.]}, isbn = {1-56032-209-8}, pages = {XVII, 773 S. : graph. Darst.}, year = {1992}, language = {en} } @article{Hoettges1992, author = {H{\"o}ttges, J{\"o}rg}, title = {A Full Finite Element Solution for the Unsteady Advection-Diffusion Equation}, series = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell}, journal = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell}, publisher = {Computational Mechanics Publications [u.a.]}, address = {Southampton [u.a.]}, isbn = {185312169X}, year = {1992}, language = {en} } @article{HoettgesFeldhausBrockhausetal.1992, author = {H{\"o}ttges, J{\"o}rg and Feldhaus, R. and Brockhaus, T. and Rouv{\´e}, Gerhard}, title = {Finite Element Simulation of Flow and Pollution Transport applied to a Part of the River Rhine / Feldhaus, R.; J. H{\"o}ttges, T. Brockhaus; G. Rouv{\´e}}, series = {Hydraulic and environmental modelling : proceedings of the Second International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters / [IAHR-AIRH]. Ed. by R. A. Falconer}, journal = {Hydraulic and environmental modelling : proceedings of the Second International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters / [IAHR-AIRH]. Ed. by R. A. Falconer}, publisher = {Ashgate}, address = {Aldershot, Hants, UK [u.a.]}, year = {1992}, language = {en} } @article{HoettgesArnoldRouve1994, author = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard}, title = {Measurement of transverse mixing using digital image acquisition}, series = {Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven}, journal = {Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven}, publisher = {Wiley}, address = {Chichester [u.a.]}, isbn = {0471941425}, pages = {XVI, 458 S., [8] Bl : Ill. (z.T. farb.), graph. Da}, year = {1994}, language = {en} } @book{Kettern1993, author = {Kettern, J{\"u}rgen}, title = {Mechanical and biological treatment of waste after separate collection / R. Damiecki; J.T. Kettern. Italian Ministry of Enviroment}, publisher = {Eigenverlag}, address = {Caglieri}, pages = {16 S.}, year = {1993}, language = {en} } @article{HoettgesRitterbachEls1987, author = {H{\"o}ttges, J{\"o}rg and Ritterbach, E. and Els, H.}, title = {Optical Improvement of LDV-Measurement in Pipe Flow / Ritterbach, E.; J. H{\"o}ttges; H. Els}, series = {Laser anemometry : advances and applications; proceedings of the 2. International Conference, Strathclyde, Scotland, 21st to 23rd September 1987 / ed. by John Turner ... UK LDA Users Group}, journal = {Laser anemometry : advances and applications; proceedings of the 2. International Conference, Strathclyde, Scotland, 21st to 23rd September 1987 / ed. by John Turner ... UK LDA Users Group}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3540187561}, pages = {VII, 601 S : Ill., graph. Darst.}, year = {1987}, language = {en} } @article{HoettgesArnoldRouve1989, author = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard}, title = {Combined Digital Image and Finite Element Analysis of Mixing in Compound Open Channel Flow / Arnold, U.; J. H{\"o}ttges; G. Rouv{\´e}}, series = {Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur}, journal = {Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur}, publisher = {Universal Acad. Press}, address = {Tokyo}, isbn = {4-946443-03-7}, pages = {569 -- 576}, year = {1989}, language = {en} } @article{BienerSasse1993, author = {Biener, Ernst and Sasse, T.}, title = {Construction and rehabilitation of landfill shafts}, series = {Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1}, journal = {Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1}, publisher = {CISA, Environmental Sanitary Engineering Centre}, address = {Cagliari}, pages = {451 -- 460}, year = {1993}, language = {en} } @article{GosslaSato1998, author = {Gossla, Ulrich and Sato, R.}, title = {Present production circumstances of aggregate in Germany / Sato, R.; Gossla, U.}, series = {Cement \& Concrete (1998)}, journal = {Cement \& Concrete (1998)}, pages = {146 -- 153}, year = {1998}, language = {en} } @article{BassamArtmannHescheleretal.2011, author = {Bassam, Rasha and Artmann, Gerhard and Hescheler, J{\"u}rgen and Graef, T. and Temiz Artmann, Ayseg{\"u}l and Porst, Dariusz and Linder, Peter and Kayser, Peter and Arinkin, Vladimir and Gossmann, Matthias and Digel, Ilya}, title = {Alterations in human hemoglobin structure related to red blood cell storage}, year = {2011}, abstract = {The importance of the availability of stored blood or blood cells, respectively, for urgent transfusion cannot be overestimated. Nowadays, blood storage becomes even more important since blood products are used for epidemiological studies, bio-technical research or banked for transfusion purposes. Thus blood samples must not only be processed, stored, and shipped to preserve their efficacy and safety, but also all parameters of storage must be recorded and reported for Quality Assurance. Therefore, blood banks and clinical research facilities are seeking more accurate, automated means for blood storage and blood processing.}, subject = {H{\"a}moglobin}, language = {en} } @article{PreissLinderWendtetal.2011, author = {Preiß, C. and Linder, Peter and Wendt, K. and Krystek, M. and Digel, Ilya and Gossmann, Matthias and Temiz Artmann, Ayseg{\"u}l and Porst, Dariusz and Kayser, Peter and Bassam, Rasha and Artmann, Gerhard}, title = {Engineering technology for plant physiology and plant stress research}, year = {2011}, abstract = {Plant physiology and plant stress: Plant physiology will be much more important for human mankind because of yield and cultivation limits of crops determined by their resistance to stress. To assess and counteract various stress factors it is necessary to conduct plant research to gain information and results on plant physiology.}, subject = {Pflanzenphysiologie}, language = {en} } @article{SeifarthSchehlLinderetal.2011, author = {Seifarth, Volker and Schehl, D. and Linder, Peter and Gossmann, Matthias and Digel, Ilya and Artmann, Gerhard and Porst, Dariusz and Preiß, C. and Kayser, Peter and Pack, O. and Temiz Artmann, Ayseg{\"u}l}, title = {Ureplace: development of a bioreactor for in vitro culturing of cell seeded tubular vessels on collagen scaffolds}, year = {2011}, abstract = {The demand of replacements for inoperable organs exceeds the amount of available organ transplants. Therefore, tissue engineering developed as a multidisciplinary field of research for autologous in-vitro organs. Such three dimensional tissue constructs request the application of a bioreactor. The UREPLACE bioreactor is used to grow cells on tubular collagen scaffolds OPTIMAIX Sponge 1 with a maximal length of 7 cm, in order to culture in vitro an adequate ureter replacement. With a rotating unit, (urothelial) cells can be placed homogeneously on the inner scaffold surface. Furthermore, a stimulation is combined with this bioreactor resulting in an orientation of muscle cells. These culturing methods request a precise control of several parameters and actuators. A combination of a LabBox and the suitable software LabVision is used to set and conduct parameters like rotation angles, velocities, pressures and other important cell culture values. The bioreactor was tested waterproof successfully. Furthermore, the temperature controlling was adjusted to 37 °C and the CO2 - concentration regulated to 5 \%. Additionally, the pH step responses of several substances showed a perfect functioning of the designed flow chamber. All used software was tested and remained stable for several days.}, subject = {Tissue Engineering}, language = {en} } @article{ZhubanovaAknazarovMansurovetal.2010, author = {Zhubanova, Azhar A. and Aknazarov, S. K. and Mansurov, Zulkhair and Digel, Ilya and Kozhalakova, A. A. and Akimbekov, Nuraly S. and O'Heras, Carlos and Tazhibayeva, S. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l}, title = {Adsorption of bacterial Lipopolysaccharides and blood plasma proteins on modified carbonized materials}, year = {2010}, abstract = {Bacterial lipopolysaccharides (endotoxins) show strong biological effects at very low concentrations in human beings and many animals when entering the blood stream. These include affecting structure and function of organs and cells, changing metabolic functions, raising body temperature, triggering the coagulation cascade, modifying hemodynamics and causing septic shock. Because of this toxicity, the removal of even minute amounts is essential for safe parenteral administration of drugs and also for septic shock patients' care. The absence of a general method for endotoxin removal from liquid interfaces urgently requires finding new methods and materials to overcome this gap. Nanostructured carbonized plant parts is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study was comparative measurement of endotoxin- and blood proteins-related adsorption rate and adsorption capacity for different carboneous materials produced at different temperatures and under different surface modifications. As a main surface modificator, positively cbarged polymer, polyethileneimine (PEl) was used. Activated carbon materials showed good adsorption properties for LPS and some proteins used in the experiments. During the batch experiments, several techniques (dust removal, autoclaving) were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics. Modification of the surface apparently has not affected hemoglobin binding to the adsorbent's surface. Obtained adsorption isotherms can be used as a powerful tool for designing of future column-based setups for blood purification from LPS, which is especially important for septic shock treatment.}, subject = {Kohlenstofffaser}, language = {en} } @article{StaatBallmann1988, author = {Staat, Manfred and Ballmann, J.}, title = {Computation of impacts on elastic solids by methods of bicharacteristics}, series = {Computational Mechanics '88 : theory and applications ; proceedings of the International Conference on Computational Engineering Science April 10-14, 1988, Atlanta, GA, USA ; vol. 2}, journal = {Computational Mechanics '88 : theory and applications ; proceedings of the International Conference on Computational Engineering Science April 10-14, 1988, Atlanta, GA, USA ; vol. 2}, pages = {1719 -- 1722}, year = {1988}, abstract = {Shock waves, explosions, impacts or cavitation bubble collapses may generate stress waves in solids causing cracks or unexpected dammage due to focussing, physical nonlinearity or interaction with existing cracks. There is a growing interest in wave propagation, which poses many novel problems to experimentalists and theorists.}, subject = {Bicharakteristikenverfahren}, language = {en} } @inproceedings{TranNovacekTolbaetal.2011, author = {Tran, Thanh Ngoc and Novacek, V. and Tolba, R. and Klinge, U. and Turquier, F. and Staat, Manfred}, title = {Experimental and Computational approach to study colorectal anastomosis. ISB2011, Proceedings of the XXIII Congress of the International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011}, year = {2011}, abstract = {Summary: This paper presents a methodology to study and understand the mechanics of stapled anastomotic behaviors by combining empirical experimentation and finite element analysis. Performance of stapled anastomosis is studied in terms of leakage and numerical results which are compared to in vitro experiments performed on fresh porcine tissue. Results suggest that leaks occur between the tissue and staple legs penetrating through the tissue.}, subject = {Anastomose}, language = {en} } @inproceedings{SchoeningAbdelghani2012, author = {Sch{\"o}ning, Michael Josef and Abdelghani, Adnane}, title = {Nanoscale Science and Technology (NS\&T'12) : Proceedings Book Humboldt Kolleg <2012, Tunisia> ; Tunisia, 17-19 March, 2012 / ed. by Michael J. Sch{\"o}ning ; Adnane Abdelghani}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-3544}, year = {2012}, abstract = {Proceedings of the 2nd Humboldt Kolleg, Hammamet, Tunisia Organizer: Alexander von Humboldt Stiftung, Germany. pdf 184 p. Welcome Address Dear Participants, Welcome to the 2nd Humboldt Kolleg in "Nanoscale Science and Technology" (NS\&T'12) in Tunisia, sponsored by the "Alexander von Humboldt" foundation. The NS\&T'12 multidisciplinary scientific program includes seven "hot" topics dealing with "Nanoscale Science and Technology" covering basic and application-oriented research as well as industrial (market) aspects: - Molecular Biophyics, Spectroscopy Techniques, Imaging Microscopy - Nanomaterials Synthesis for Medicine and Bio-chemical Sensors - Nanostructures, Semiconductors, Photonics and Nanodevices - New Technologies in Market Industry - Environment, Electro-chemistry, Bio-polymers and Fuel Cells - Nanomaterials, Photovoltaic, Modelling, Quantum Physics - Microelectronics, Sensors Networks and Embedded Systems We are deeply indebted to all members of the Scientific Committee and General Chairs for joint Sessions and to all speakers and chairmen, who have dedicated invaluable time and efforts for the realization of this event. On behalf of the Organizing Committee, we are cordially inviting you to join the conference and hope that your stay will be fruitful, rewarding and enjoyable. Prof. Dr. Michael J. Sch{\"o}ning, Prof. Dr. Adnane Abdelghani}, subject = {Biosensor}, language = {en} } @inproceedings{TranPhamStaat2008, author = {Tran, Thanh Ngoc and Pham, Phu Tinh and Staat, Manfred}, title = {Reliability analysis of shells based on direct plasticity methods}, year = {2008}, abstract = {Abstracts der CD-Rom Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) 30.06. - 04.07.2008 Venedig, Italien. 2 Seiten Zusammenfassung der Autoren mit graph. Darst. und Literaturverzeichnis}, subject = {Finite-Elemente-Methode}, language = {en} } @misc{Kaemper2008, author = {K{\"a}mper, Klaus-Peter}, title = {Lecture notes Sensors and Actuators WS 2008/2009}, year = {2008}, abstract = {Password necessarily. Access only for Students by Prof. Dr. Klaus-Peter K{\"a}mper. Winter semester 2008/2009. 488 pages (pdf) Contents 1. Introduction 2. Introduction to Sensors 3. Introduction to Microfabrication 4. Pressure Sensors 5. Acceleration Sensors 6. Angular Rate Sensors 7. Position Sensors 8. Flow Sensors 9. Piezoelectric Actuators 10. Magnetostrictive Actuators 11. Actuators based on Shape Memory Alloys 12. Actuators based on Electrorheological Fluids 13. Actuators based on Magnetorheological Fluids 14. Index}, subject = {Sensor}, language = {en} } @inproceedings{Mertens2000, author = {Mertens, Josef}, title = {Laminar leading edges: manufacturing, contamination, and operational aspects - results from the German RaWid programme}, year = {2000}, abstract = {RaWid was the German national technology programme on transonic aerodynamics and supporting technologies, lasting from 1995 to 1998. One of the main topics was laminar wing development. Besides aerodynamic design work, many operational aspects were investigated. A manufacturing concept was developed to be applied to operational laminar wings and empennages. It was built in a large scale manufacturing demonstrator with the aerodynamic shape of a 1,5 m section of the A320 fin nose. Tolerances in shape and roughness fulfilled all requirements. The construction can easily be adapted to varying stiffness and strength requirements. Weight and manufacturing costs are comparable to common nose designs. The mock-up to be designed in ALTTA is based on this manufacturing principle. Another critical point is contamination of suction surfaces. Several tests were performed to investigate perforated titanium suction surfaces at realistic operational conditions: - a one year flight test with a suction plate in the stagnation area of the Airbus "Beluga" - a one year test of several suction plates in a ground test near the airport - a one year test of a working suction ground test installation at all weather conditions. No critical results were found. There is no long term suction degradation visible. Icing conditions and ground de-icing fluids used on airports did not pose severe problems. Some problems detected require only respection of weak design constraints.}, subject = {Laminare Str{\"o}mung}, language = {en} } @inproceedings{KernDikta2009, author = {Kern, Alexander and Dikta, Gerhard}, title = {Probability of damage of electrical and electronic systems due to indirect lightning flashes - investigation of data from German insurance companies}, year = {2009}, abstract = {In the presented paper data collected from the field related to damage statistics of electrical and electronic apparatus in household are reported and investigated. These damages (total number approx. 74000 cases), registered by five German insurance companies in 2005 and 2006, were adviced by customers as caused by lightning overvoltages. With the use of stochastical methods it is possible, to reasses the collected data and to distinguish between cases, which are with high probability caused by lightning overvoltages, and those, which are not. If there was an indication for a direct strike, this case was excluded, so the focus was only on indirect lightning flashes, i.e. only flashes to ground near the structure and flashes to or nearby an incoming service line were investigated. The data from the field contain the location of damaged apparatus (residence of the policy holder) and the distances of the nearest cloud-to-ground stroke to the location of the damage registered by the German lightning location network BLIDS at the date of damage. The statistical data along with some complementary numerical simulations allow to verify the correspondence of the Standards rules used for IEC 62305-2 with the field data and to define some correction needs. The results could lead to a better understanding whether a damage reported to an insurance company is really caused by indirect lightning, or not.}, subject = {Blitzschutz}, language = {en} } @inproceedings{BallmannRaatschenStaat1985, author = {Ballmann, J. and Raatschen, Hans-J{\"u}rgen and Staat, Manfred}, title = {High stress intensities in focussing zones of waves}, doi = {10.1016/B978-0-444-42520-1.50015-3}, year = {1985}, abstract = {The propagation of mechanical waves in plates of isotropic elastic material is investigated. After a short introduction to the understanding of focussing of stress waves in a plate with a curved boundary the method of characteristics is applied to a plate of hyperelastic material. Using this method the propagation of acceleration waves is discussed. Based on this a numerical difference scheme is developed for solving initial-boundary-value problems and applied to two examples: propagation of a point disturbance in a homogeneously finitely strained non-linear elastic plate and geometrical focussing in al linear elastic plate.}, subject = {Technische Mechanik}, language = {en} } @inproceedings{SchoeningAbdelghani2009, author = {Sch{\"o}ning, Michael Josef and Abdelghani, Adnane}, title = {Advancements in Nanotechnology and Microelectronics (ANM '09) <2009, Tunisia>: Proceedings book ; Tunisia, November, 13 \& 14, 2009 / Humboldt Kolleg. Ed. by Michael J. Sch{\"o}ning ; Adnane Abdelghani}, organization = {Humboldt-Kolleg Advancements in Nanotechnology and Microelectronics (ANM '09) <2009, Tunisia>}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-3113}, year = {2009}, abstract = {The ANM'09 multi-disciplinary scientific program includes topics in the fields of "Nanotechnology and Microelectronics" ranging from "Bio/Micro/Nano Materials and Interfacing" aspects, "Chemical and Bio-Sensors", "Magnetic and Superconducting Devices", "MEMS and Microfluidics" over "Theoretical Aspects, Methods and Modelling" up to the important bridging "Academics meet Industry".}, subject = {Nanopartikel}, language = {en} } @article{AkimbekovMansurovJandosovetal.2013, author = {Akimbekov, Nuraly S. and Mansurov, Zulkhair and Jandosov, J. and Digel, Ilya and Gossmann, Matthias and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A.}, title = {Wound healing activity of carbonized rice husk}, publisher = {Trans Tech Publications, Switzerland}, address = {B{\"a}ch}, year = {2013}, abstract = {The carbonized rice husk (CRH) was evaluated for its wound healing activity in rats using excision models. In this study, the influences of CRH on wound healing in rat skin in vivo and cellular behavior of human dermal fibroblasts in vitro were investigated. The obtained results showed that the CRH treatment promoted wound epithelization in rats and exhibited moderate inhibition of cell proliferation in vitro. CRH with lanolin oil treated wounds were found to epithelize faster as compared to controls.}, subject = {Wundheilung}, language = {en} } @inproceedings{KirchhofKraft2004, author = {Kirchhof, M. and Kraft, Bodo}, title = {UML-based modeling of architectural knowledge and design}, year = {2004}, abstract = {IASSE-2004 - 13th International Conference on Intelligent and Adaptive Systems and Software Engineering eds. W. Dosch, N. Debnath, pp. 245-250, ISCA, Cary, NC, 1-3 July 2004, Nice, France We introduce a UML-based model for conceptual design support in civil engineering. Therefore, we identify required extensions to standard UML. Class diagrams are used for elaborating building typespecific knowledge: Object diagrams, implicitly contained in the architect's sketch, are validated against the defined knowledge. To enable the use of industrial, domain-specific tools, we provide an integrated conceptual design extension. The developed tool support is based on graph rewriting. With our approach architects are enabled to deal with semantic objects during early design phase, assisted by incremental consistency checks.}, subject = {UML}, language = {en} }