@misc{ThielTippkoetterSucketal.2010,
  author    = {Thiel, A. and Tippk{\"o}tter, Nils and Suck, K. and Sohling, U. and Ruf, F. and Ulber, Roland},
  title     = {Simulation und Experiment bei der Aufarbeitung von Polyphenolen durch neue Silicatmaterialien},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201050104},
  pages     = {1589},
  year      = {2010},
  abstract  = {Nachwachsende Rohstoffe stellen eine reichhaltige Quelle f{\"u}r die Gewinnung von wirtschaftlich interessanten Biomolek{\"u}len dar. Die Gruppe der Polyphenole ist dabei f{\"u}r mehrere Industriezweige bedeutend. Ihre antioxidativen Eigenschaften sind z. B. f{\"u}r die Pharmaindustrie interessant. Im derzeit bearbeiteten Projekt sollen Polyphenole aus Pflanzenbestandteilen isoliert und aufgereinigt werden, um sie dann als Komponenten f{\"u}r eine Vernetzung von Polymeren auf der Basis von Fetts{\"a}uren einzusetzen. Bisher sind im Wesentlichen Prozesse zur Entfernung von Polyphenolen aus Getr{\"a}nken wie Bier und Wein bekannt. Eine Wiedergewinnung der Polyphenole war in diesen Anwendungen bisher nicht relevant. Die Gewinnung bzw. Abtrennung der Polyphenole erfolgt u. a. durch kommerziell erh{\"a}ltliche Adsorbentien wie PVPP, Adsorberharze XAD16 (Rh{\"o}m \& Haas) oder SP70 (Sepabeads), deren Partikelgr{\"o}ßen im Bereichvon 0,1 ± 0,8 mm und spezifischen Oberfl{\"a}chen von 700 ± 900 m 2 /g liegen. Als Alternative zu diesen Adsorbern sollen neue Materialien auf Basis von anorganischen Trennmedien, wie z. B. nat{\"u}rlichen Tonmineralien, f{\"u}r die Polyphenolabtrennung verwendet werden. Derzeit wird durch Abgleich von Experiment und Simulation ein Materialscreening durchgef{\"u}hrt. Durch den Einsatz molekulardynamischer Bindungssimulationen wird die Adsorbersuche beschleunigt und Vorhersagen zu Modifikationen bei der Herstellung der neuen Adsorbentien erm{\"o}glicht.},
  language  = {de}
}
@inproceedings{UibelBlass2010,
  author    = {Uibel, Thomas and Blaß, Hans Joachim},
  title     = {A new method to determine suitable spacings and distances for self-tapping screws},
  series = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures},
  volume    = {43},
  booktitle = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures},
  publisher = {Lehrstuhl f{\"u}r Ingenieurholzbau und Baukonstruktionen},
  address   = {Karlsruhe},
  issn      = {1864-1784},
  year      = {2010},
  abstract  = {The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.},
  language  = {en}
}
@inproceedings{DammRitzStrauch2010,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Benutzerzentrierte Anforderungsanalyse f{\"u}r die Produktlinien-Entwicklung mobiler Unternehmenssoftware},
  series = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  booktitle = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  editor    = {Klink, Stefan},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-266-6},
  pages     = {117 -- 130},
  year      = {2010},
  language  = {de}
}
@inproceedings{MagnorSoltauBragardetal.2010,
  author    = {Magnor, D. and Soltau, N. and Bragard, Michael and Schmiegel, A. and De Doncker, R. W. and Sauer, D. U.},
  title     = {Analysis of the model dynamics for the battery and battery converter in a grid-connected 5 kW photovoltaic system},
  series = {Proceedings / 25th European Photovoltaic Solar Energy Conference and Exhibition ; 5th World Conference on Photovoltaic Energy Conversion ; Feria Valencia, Convention \& Exhibition Centre, Valencia, Spain, conference 6 - 10 September 2010, exhibition 6 - 9 September 2010 ; Joint World Conference of: 25th European Photovoltic Solar Energy Conference and Exhibition, 36th US IEEE Photovoltaic Specialists Conference, 20th Asia/Pacific PV Science and Engineering Conference},
  booktitle = {Proceedings / 25th European Photovoltaic Solar Energy Conference and Exhibition ; 5th World Conference on Photovoltaic Energy Conversion ; Feria Valencia, Convention \& Exhibition Centre, Valencia, Spain, conference 6 - 10 September 2010, exhibition 6 - 9 September 2010 ; Joint World Conference of: 25th European Photovoltic Solar Energy Conference and Exhibition, 36th US IEEE Photovoltaic Specialists Conference, 20th Asia/Pacific PV Science and Engineering Conference},
  editor    = {de Santi, Giovanni Frederigo},
  publisher = {WIP Renewable Energies},
  address   = {[M{\"u}nchen]},
  isbn      = {3-936338-26-4 (DVD-ROM)},
  year      = {2010},
  language  = {en}
}
@article{BragardSoltauThomasetal.2010,
  author    = {Bragard, Michael and Soltau, N. and Thomas, S. and De Doncker, R. W.},
  title     = {The balance of renewable sources and user demands in grids : power electronics for modular battery energy storage systems},
  series = {IEEE transactions on power electronics},
  volume    = {25},
  journal   = {IEEE transactions on power electronics},
  number    = {12},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2010.2085455},
  pages     = {3049 -- 3056},
  year      = {2010},
  abstract  = {The continuously growing amount of renewable sources starts compromising the stability of electrical grids. Contradictory to fossil fuel power plants, energy production of wind and photovoltaic (PV) energy is fluctuating. Although predictions have significantly improved, an outage of multi-MW offshore wind farms poses a challenging problem. One solution could be the integration of storage systems in the grid. After a short overview, this paper focuses on two exemplary battery storage systems, including the required power electronics. The grid integration, as well as the optimal usage of volatile energy reserves, is presented for a 5- kW PV system for home application, as well as for a 100- MW medium-voltage system, intended for wind farm usage. The efficiency and cost of topologies are investigated as a key parameter for large-scale integration of renewable power at medium- and low-voltage.},
  language  = {en}
}
@misc{TippkoetterMaurerPasteuretal.2010,
  author    = {Tippk{\"o}tter, Nils and Maurer, S. and Pasteur, A. and Kampeis, P. and Ulber, Roland},
  title     = {Hochgradient-Magnetseparation von Fermentationsprodukten-FEM Simulation der Filtermatrix},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201050217},
  pages     = {1361},
  year      = {2010},
  abstract  = {Durch den Einsatz magnetisierbarer Partikel lassen sich Stoffwechselprodukte direkt und selektiv aus feststoffreichen Fermentationssuspensionen abtrennen. Im Gegensatz zu klassischen Adsorbermaterialien k{\"o}nnen magnetisierbare Partikel mit sehr geringen Durchmessern verwendet werden. Zur deren Abtrennung ist jedoch ein hoher Magnetfeldgradient notwendig. Dieser wird in der Regel durch in der Trennkammer bzw. dem Magnetfeld eingebrachte magnetisierbare Dr{\"a}hte realisiert. Bei der Auslegung der Drahtgitter ist ein Kompromiss zwischen Abtrennrate und Durchl{\"a}ssigkeit n{\"o}tig. Die Ausrichtung der Dr{\"a}hte in Relation zum Magnetfeld, deren Abstand sowie die geometrische Anordnung k{\"o}nnen hierbei variiert werden. Zum Verst{\"a}ndnis der Einfl{\"u}sse auf das sich ausbildende Magnetfeld und die Fluiddynamik wurden Simulationen mit der Finite-Elemente-Methode durchgef{\"u}hrt und experimentell {\"u}berpr{\"u}ft. Hierf{\"u}r wurden die Dr{\"a}hte unter Variation von Anzahl, Richtung und Anordnung in den Hochgradient-Magnetseparator eingebracht. Erste Verifizierungen der Simulationen zeigen, dass die in Magnetfeldrichtung ausgerichteten Dr{\"a}hte (x-Achse) {\"u}ber die geringste Partikelr{\"u}ckhaltef{\"a}higkeit verf{\"u}gen. Die Dr{\"a}hte der y- und z-Achse halten den gr{\"o}ßten Anteil der Magnetpartikel zur{\"u}ck, wobei die Dr{\"a}hte in y-Richtung den h{\"o}chsten Feldgradienten ausbilden. Des Weiteren konnte gezeigt werden, dass eine rhomboedrische Drahtanordnung der kubischen vorzuziehen ist.},
  language  = {de}
}
@incollection{Raatschen2010,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {75 Jahre Vereinsgeschichte},
  series = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  booktitle = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  publisher = {Klinkenberg},
  address   = {Aachen},
  isbn      = {978-3-941704-03-9},
  pages     = {66 -- 72},
  year      = {2010},
  subject      = {Geschichte},
  language  = {de}
}
@article{EilmannBuchmannSiegwolfetal.2010,
  author    = {Eilmann, Britta and Buchmann, Nina and Siegwolf, Rolf and Saurer, Matthias and Cherubini, Paolo and Rigling, Andreas},
  title     = {Fast response of Scots pine to improved water availability reflected in tree-ring width and δ13C},
  series = {Plant, Cell and Environment},
  volume    = {33},
  journal   = {Plant, Cell and Environment},
  number    = {8},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1365-3040 (Online)},
  doi       = {10.1111/j.1365-3040.2010.02153.x},
  pages     = {1351 -- 1360},
  year      = {2010},
  abstract  = {Drought-induced forest decline, like the Scots pine mortality in inner-Alpine valleys, will gain in importance as the frequency and severity of drought events are expected to increase. To understand how chronic drought affects tree growth and tree-ring δ13C values, we studied mature Scots pine in an irrigation experiment in an inner-Alpine valley. Tree growth and isotope analyses were carried out at the annual and seasonal scale. At the seasonal scale, maximum δ13C values were measured after the hottest and driest period of the year, and were associated with decreasing growth rates. Inter-annual δ13C values in early- and latewood showed a strong correlation with annual climatic conditions and an immediate decrease as a response to irrigation. This indicates a tight coupling between wood formation and the freshly produced assimilates for trees exposed to chronic drought. This rapid appearance of the isotopic signal is a strong indication for an immediate and direct transfer of newly synthesized assimilates for biomass production. The fast appearance and the distinct isotopic signal suggest a low availability of old stored carbohydrates. If this was a sign for C-storage depletion, an increasing mortality could be expected when stressors increase the need for carbohydrate for defence, repair or regeneration.},
  language  = {en}
}
@article{FontivonArxGarciaGonzalezetal.2010,
  author    = {Fonti, Patrick and von Arx, Georg and Garc{\´i}a-Gonz{\´a}lez, Ignacio and Eilmann, Britta and Sass-Klaassen, Ute G. W. and G{\"a}rtner, Holger and Eckstein, Dieter},
  title     = {Studying global change through investigation of the plastic responses of xylem anatomy in tree rings},
  series = {New Phytologist},
  volume    = {185},
  journal   = {New Phytologist},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1469-8137 (Online)},
  doi       = {10.1111/j.1469-8137.2009.03030.x},
  pages     = {42 -- 53},
  year      = {2010},
  abstract  = {Variability in xylem anatomy is of interest to plant scientists because of the role water transport plays in plant performance and survival. Insights into plant adjustments to changing environmental conditions have mainly been obtained through structural and functional comparative studies between taxa or within taxa on contrasting sites or along environmental gradients. Yet, a gap exists regarding the study of hydraulic adjustments in response to environmental changes over the lifetimes of plants. In trees, dated tree-ring series are often exploited to reconstruct dynamics in ecological conditions, and recent work in which wood-anatomical variables have been used in dendrochronology has produced promising results. Environmental signals identified in water-conducting cells carry novel information reflecting changes in regional conditions and are mostly related to short, sub-annual intervals. Although the idea of investigating environmental signals through wood anatomical time series goes back to the 1960s, it is only recently that low-cost computerized image-analysis systems have enabled increased scientific output in this field. We believe that the study of tree-ring anatomy is emerging as a promising approach in tree biology and climate change research, particularly if complemented by physiological and ecological studies. This contribution presents the rationale, the potential, and the methodological challenges of this innovative approach.},
  language  = {en}
}
@misc{HezelFrauenrathRenzetal.2010,
  author    = {Hezel, Fabian and Frauenrath, Tobias and Renz, Wolfgang and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Feasibility of CINE Myocardial T2* Mapping Using Susceptibility Weighted Gradient-Echo Imaging at 7.0 T},
  series = {2010 ISMRM-ESMRMB joint annual meeting},
  journal   = {2010 ISMRM-ESMRMB joint annual meeting},
  issn      = {1545-4428},
  year      = {2010},
  abstract  = {This study is designed to demonstrate the promise of susceptibility weighted 2D CINE FLASH and T2* Mapping of the heart at 7T.},
  language  = {en}
}
@article{RiglingEilmannKoechlietal.2010,
  author    = {Rigling, Andreas and Eilmann, Britta and Koechli, Roger and Dobbertin, Matthias},
  title     = {Mistletoe-induced crown degradation in Scots pine in a xeric environment},
  volume    = {30},
  number    = {7},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1758-4469 (Online)},
  doi       = {10.1093/treephys/tpq038},
  pages     = {845 -- 832},
  year      = {2010},
  abstract  = {Increasing Scots pine (Pinus sylvestris L.) mortality has been recently observed in the dry inner valleys of the European Alps. Besides drought, infection with pine mistletoe (Viscum album ssp. austriacum) seems to play an important role in the mortality dynamics of Scots pines, but how mistletoes promote pine decline remains unclear. To verify whether pine mistletoe infection weakens the host via crown degradation, as observed for dwarf mistletoes, we studied the negative effects of pine mistletoe infestation on the photosynthetic tissues and branch growth of pairs of infested and non-infested branches. Pine mistletoe infection leads to crown degradation in its host by reducing the length, the radial increment, the ramification, the needle length and the number of needle years of the infested branches. This massive loss in photosynthetic tissue results in a reduction in primary production and a subsequent decrease in carbohydrate availability. The significant reduction in needle length due to mistletoe infection is an indication for a lower water and nutrient availability in infested branches. Thus, mistletoe infection might lead to a decrease in the availability of water and carbohydrates, the two most important growth factors, which are already shortened due to the chronic drought situation in the area. Therefore, pine mistletoe increases the risk of drought-induced mortality of its host when growing in a xeric environment.},
  language  = {en}
}
@inproceedings{DiIorioNobileStapenhorst2010,
  author    = {Di Iorio, Marina and Nobile, Maria Luna and Stapenhorst, Carolin},
  title     = {Martinella},
  series = {Edifici alti e paesaggio},
  booktitle = {Edifici alti e paesaggio},
  editor    = {Bovati, Marco and Di Franco, Andrea},
  publisher = {Maggioli},
  address   = {Santarcangelo di Romagna},
  isbn      = {978-88-387-4434-1},
  pages     = {191 -- 202},
  year      = {2010},
  language  = {it}
}
@article{RieplPettrakFaulstichetal.2010,
  author    = {Riepl, Herbert Matthias and Pettrak, J{\"u}rgen and Faulstich, Martin and Herrmann, Wolfgang Anton},
  title     = {Self metathesis of fatty alcohols and amines to provide monomers for polyester and polyamide products},
  series = {Macromolecular Symposia},
  volume    = {293},
  journal   = {Macromolecular Symposia},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-3900 (eISSN)},
  doi       = {10.1002/masy.200900041},
  pages     = {39 -- 42},
  year      = {2010},
  abstract  = {Self metathesis of oleochemicals offers a variety of bifunctional compounds, that can be used as monomer for polymer production. Many precursors are in huge scales available, like oleic acid ester (biodiesel), oleyl alcohol (tensides), oleyl amines (tensides, lubricants). We show several ways to produce and separate and purify C18-α,ω-bifunctional compounds, using Grubbs 2nd Generation catalysts, starting from technical grade educts.},
  language  = {en}
}
@phdthesis{Pettrak2010,
  author    = {Pettrak, J{\"u}rgen},
  title     = {Nutzung nachwachsender Rohstoffe bei der Herstellung thermoplastischer Elastomere aus Folgeprodukten der Olefinmetathese},
  publisher = {Technische Universit{\"a}t M{\"u}nchen},
  address   = {M{\"u}nchen},
  pages     = {137 Seiten},
  year      = {2010},
  abstract  = {Metathese von {\"O}ls{\"a}ure und Derivaten ist ein interessanter Weg f{\"u}r die Synthese bifunktioneller Verbindungen aus nachwachsenden Rohstoffen. Verwendet wurden Ru-Katalysatoren der zweiten Generation, welche eine hohe Toleranz gegen{\"u}ber funktionellen Gruppen und Verunreinigungen aufweisen. Trotz des Einsatzes technischer Edukte waren Umsetzungen mit niedrigen Katalysatormengen (0.001 - 0.01 mol-\%) m{\"o}glich, mit Ausbeuten entsprechend der Literatur. Kreuzmetathesen erm{\"o}glichten variable Kettenl{\"a}ngen und Funktionalit{\"a}ten der Monomere, die Produktgewinnung ist jedoch aufw{\"a}ndig. Selbstmetathese lieferte C18-bifunktionelle Verbindungen, welche einfach durch Destillation oder Kristallisation isoliert werden k{\"o}nnen. Neben der katalystischen Umsetzung wurde auch die Produktgewinnung untersucht und f{\"u}r ausgew{\"a}hlte Produkte auch im gr{\"o}ßeren Maßstab durchgef{\"u}hrt.},
  language  = {de}
}
@article{RibitschKarlBirnerGruenbergeretal.2010,
  author    = {Ribitsch, D. and Karl, W. and Birner-Gruenberger, R. and Gruber, K. and Eiteljoerg, I. and Remler, P. and Wieland, S. and Siegert, Petra and Maurer, Karl-Heinz and Schwab, H.},
  title     = {C-terminal truncation of a metagenome-derived detergent protease for effective expression in E. coli},
  series = {Journal of biotechnology},
  volume    = {150},
  journal   = {Journal of biotechnology},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4863 (E-Journal); 0168-1656 (Print)},
  doi       = {10.1016/j.jbiotec.2010.09.947},
  pages     = {408 -- 416},
  year      = {2010},
  abstract  = {Recently, a new alkaline protease named HP70 showing highest homology to extracellular serine proteases of Stenotrophomonas maltophilia and Xanthomonas campestris was found in the course of a metagenome screening for detergent proteases (Niehaus et al., submitted for publication). Attempts to efficiently express the enzyme in common expression hosts had failed. This study reports on the realization of overexpression in Escherichia coli after structural modification of HP70. Modelling of HP70 resulted in a two-domain structure, comprising the catalytic domain and a C-terminal domain which includes about 100 amino acids. On the basis of the modelled structure the enzyme was truncated by deletion of most of the C-terminal domain yielding HP70-C477. This structural modification allowed effective expression of active enzyme using E. coli BL21-Gold as the host. Specific activity of HP70-C477 determined with suc-l-Ala-l-Ala-l-Pro-l-Phe-p-nitroanilide as the substrate was 30 ± 5 U/mg compared to 8 ± 1 U/mg of the native enzyme. HP70-C477 was most active at 40 °C and pH 7-11; these conditions are prerequisite for a potential application as detergent enzyme. Determination of kinetic parameters at 40 °C and pH = 9.5 resulted in KM = 0.23 ± 0.01 mM and kcat = 167.5 ± 3.6 s⁻¹. MS-analysis of peptide fragments obtained from incubation of HP70 and HP70-C477 with insulin B indicated that the C-terminal domain influences the cleavage preferences of the enzyme. Washing experiments confirmed the high potential of HP70-C477 as detergent protease.},
  language  = {en}
}
@article{FrauenrathHezelRenzetal.2010,
  author    = {Frauenrath, Tobias and Hezel, Fabian and Renz, Wolfgang and de Geyer d'Orth, Thibaut and Dieringer, Matthias and von Knobelsdorf-Brenkenhoff, Florian and Prothmann, Marcel and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Acoustic cardiac triggering: a practical solution for synchronization and gating of cardiovascular magnetic resonance at 7 Tesla},
  series = {Journal of Cardiovascular Magnetic Resonance},
  volume    = {12},
  journal   = {Journal of Cardiovascular Magnetic Resonance},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1532-429X},
  doi       = {10.1186/1532-429X-12-67},
  year      = {2010},
  abstract  = {Background To demonstrate the applicability of acoustic cardiac triggering (ACT) for imaging of the heart at ultrahigh magnetic fields (7.0 T) by comparing phonocardiogram, conventional vector electrocardiogram (ECG) and traditional pulse oximetry (POX) triggered 2D CINE acquisitions together with (i) a qualitative image quality analysis, (ii) an assessment of the left ventricular function parameter and (iii) an examination of trigger reliability and trigger detection variance derived from the signal waveforms. Results ECG was susceptible to severe distortions at 7.0 T. POX and ACT provided waveforms free of interferences from electromagnetic fields or from magneto-hydrodynamic effects. Frequent R-wave mis-registration occurred in ECG-triggered acquisitions with a failure rate of up to 30\% resulting in cardiac motion induced artifacts. ACT and POX triggering produced images free of cardiac motion artefacts. ECG showed a severe jitter in the R-wave detection. POX also showed a trigger jitter of approximately Δt = 72 ms which is equivalent to two cardiac phases. ACT showed a jitter of approximately Δt = 5 ms only. ECG waveforms revealed a standard deviation for the cardiac trigger offset larger than that observed for ACT or POX waveforms. Image quality assessment showed that ACT substantially improved image quality as compared to ECG (image quality score at end-diastole: ECG = 1.7 ± 0.5, ACT = 2.4 ± 0.5, p = 0.04) while the comparison between ECG vs. POX gated acquisitions showed no significant differences in image quality (image quality score: ECG = 1.7 ± 0.5, POX = 2.0 ± 0.5, p = 0.34). Conclusions The applicability of acoustic triggering for cardiac CINE imaging at 7.0 T was demonstrated. ACT's trigger reliability and fidelity are superior to that of ECG and POX. ACT promises to be beneficial for cardiovascular magnetic resonance at ultra-high field strengths including 7.0 T.},
  language  = {en}
}
@article{BarbazanHagenbachPaulssenetal.2010,
  author    = {Barbaz{\´a}n, Paula and Hagenbach, Adelheid and Paulßen, Elisabeth and Abram, Ulrich and Carballo, Rosa and Rodriguez-Hermida, Sabina and V{\´a}zquez-L{\´o}pez, Ezequiel M.},
  title     = {Tricarbonyl Rhenium(I) and Technetium(I) Complexes with Hydrazones Derived from 4,5-Diazafluoren-9-one and 1,10-Phenanthroline-5,6-dione},
  series = {European Journal of Inorganic Chemistry},
  journal   = {European Journal of Inorganic Chemistry},
  number    = {29},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1099-0682},
  doi       = {10.1002/ejic.201000522},
  pages     = {4622 -- 4630},
  year      = {2010},
  abstract  = {Tricarbonylrhenium(I) and -technetium(I) halide (halide = Cl and Br) complexes of ligands derived from 4,5-diazafluoren-9-one (df) and 1,10-phenanthroline-5,6-dione (phen) derivatives of benzoic and 2-hydroxybenzoic acid hydrazides have been prepared. The complexes have been characterized by elemental analysis, MS, IR, 1H NMR and absorption and emission UV/Vis spectroscopic methods. The metal centres (ReI and TcI) are coordinated through the nitrogen imine atoms and establish five-membered chelate rings, whereas the hydrazone groups stand uncoordinated. The 1H NMR spectra suggest the same behaviour in solution on the basis of only marginal variations in the chemical shifts of the hydrazine protons.},
  language  = {en}
}
@article{UlberPothMonzonetal.2010,
  author    = {Ulber, Roland and Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils},
  title     = {Prozessintegration von Hydrolyse und Fermentation von Cellulose- Faserstoff},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2640},
  doi       = {10.1002/cite.200900103},
  pages     = {135 -- 139},
  year      = {2010},
  abstract  = {Ein viel versprechender erneuerbarer Rohstoff f{\"u}r die Produktion von Chemikalien und Treibstoffen ist Lignocellulose aus pflanzlicher Biomasse. Die darin enthaltenen Zucker k{\"o}nnen mittels enzymatischer Hydrolyse freigesetzt und fermentativ zu Ethanol umgesetzt werden. Ein interessanter Ansatz ist dabei die simultane Verzuckerung und Fermentation. Hefen und Enzyme haben mit 30 °C bzw. 50 °C zwar unterschiedliche Temperaturoptima, es konnte aber gezeigt werden, dass auch bei den niedrigeren Temperaturen eine Umsetzung der Cellulose zu Glucose erfolgt, wenn auch langsamer als bei optimalen Bedingungen. Außerdem konnte in Vorversuchen gezeigt werden, dass Ethanol in den zu erwartenden Konzentrationen keinen Einfluss auf die enzymatische Umsetzung hat.},
  language  = {de}
}
@article{SiekerNeunerDimitrovaetal.2010,
  author    = {Sieker, Tim and Neuner, Andreas and Dimitrova, Darina and Tippk{\"o}tter, Nils and Bart, Hans-J{\"o}rg and Heinzle, Elmar and Ulber, Roland},
  title     = {Grassilage als Rohstoff f{\"u}r die chemische Industrie},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2640},
  doi       = {10.1002/cite.201000088},
  pages     = {1153 -- 1159},
  year      = {2010},
  abstract  = {Grassilage stellt einen nachwachsenden Rohstoff mit großem Potenzial dar. Neben Cellulose und Hemicellulose enth{\"a}lt sie auch organische S{\"a}uren, insbesondere Milchs{\"a}ure. In einem Bioraffinerie-Projekt wird die Milchs{\"a}ure aus der Silage isoliert und mit gentechnisch optimierten St{\"a}mmen zu L-Lysin weiterverarbeitet. Die Lignocellulose wird hydrolysiert und zu Ethanol fermentiert. Ein besonderes Augenmerk liegt auf der Integration der unterschiedlichen Prozesse sowie der einzelnen Prozessschritte zu einem Gesamtprozess, der s{\"a}mtliche Inhaltsstoffe der Silage verwertet.},
  language  = {de}
}
@article{BenzelLinzbach2010,
  author    = {Benzel, Ute and Linzbach, Meike},
  title     = {Bilanzierung und Offenlegung von Ertragsteuerrisiken - Quo vadis? Unsichere Steuerpositionen in der Rechnungslegung nach IFRS, US-GAAP und HGB},
  series = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung},
  journal   = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung},
  number    = {11},
  issn      = {1862-5533},
  pages     = {475 -- 523},
  year      = {2010},
  abstract  = {In den letzten drei bis vier Jahren unterlag der Bereich der Bilanzierung und Offenlegung von unsicheren Steuerpositionen im IFRS- und US-GAAP-Abschluss einem stetigen Wandel. Sowohl nach US-GAAP als auch nach IFRS nehmen die Anforderungen an die Bilanzierung und Offenlegung best{\"a}ndig zu. Schon allein dies zeigt die Bedeutung, die dem Themenbereich der Steuerrisiken beigemessen wird. Aber nicht nur im Rahmen der Berichterstattung im Jahresabschluss stehen Steuerrisiken oben auf der Agenda, auch der amerikanische Internal Revenue Service (IRS) verfolgt das Thema sehr konsequent und plant, bestimmte Unternehmen zu Angaben von Steuerrisiken im Rahmen der Steuererkl{\"a}rungen zu verpflichten. Der Aufsatz befasst sich mit den neueren Entwicklungen im Bereich der Bilanzierung und Offenlegung von unsicheren Steuerpositionen in der Rechnungslegung nach IFRS, US-GAAP und HGB und der Offenlegung von Steuerrisiken im Rahmen der Steuererkl{\"a}rung.},
  language  = {de}
}
@article{FleischhakerEversDey2010,
  author    = {Fleischhaker, Robert and Evers, J{\"o}rg and Dey, Tarak N.},
  title     = {Phase modulation induced by cooperative effects in electromagnetically induced transparency},
  series = {Physical Review A - Atomic, molecular, and optical physics},
  volume    = {82},
  journal   = {Physical Review A - Atomic, molecular, and optical physics},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1050-2947},
  doi       = {10.1103/PhysRevA.82.013815},
  pages     = {013815},
  year      = {2010},
  abstract  = {We analyze the influence of dipole-dipole interactions in an electromagnetically induced transparency set up for a density at the onset of cooperative effects. To this end, we include mean-field models for the influence of local-field corrections and radiation trapping into our calculation. We show both analytically and numerically that the polarization contribution to the local field strongly modulates the phase of a weak pulse. We give an intuitive explanation for this local-field-induced phase modulation and demonstrate that it distinctively differs from the nonlinear self-phase-modulation that a strong pulse experiences in a Kerr medium.},
  language  = {en}
}
@misc{Digel2010,
  author    = {Digel, Ilya},
  title     = {In-situ biological decontamination of an ice melting probe},
  year      = {2010},
  language  = {en}
}
@article{ChristenKowalskiBartelt2010,
  author    = {Christen, Marc and Kowalski, Julia and Bartelt, Perry},
  title     = {RAMMS: Numerical simulation of dense snow avalanches in three-dimensional terrain},
  series = {Cold Regions Science and Technology},
  volume    = {63},
  journal   = {Cold Regions Science and Technology},
  number    = {1-2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7441},
  doi       = {10.1016/j.coldregions.2010.04.005},
  pages     = {1 -- 14},
  year      = {2010},
  abstract  = {Numerical avalanche dynamics models have become an essential part of snow engineering. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, their application poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to construct hazard scenarios which involve the careful specification of initial conditions (release zone location and dimensions) and definition of appropriate friction parameters. The interpretation of simulation results requires an understanding of the numerical solution schemes and easy to use visualization tools. We discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with accurate second-order numerical solution schemes. The model allows the specification of multiple release zones in three-dimensional terrain. Snow cover entrainment is considered. Furthermore, two different flow rheologies can be applied: the standard Voellmy-Salm (VS) approach or a random kinetic energy (RKE) model, which accounts for the random motion and inelastic interaction between snow granules. We present the governing differential equations, highlight some of the input and output features of RAMMS and then apply the models with entrainment to simulate two well-documented avalanche events recorded at the Vall{\´e}e de la Sionne test site.},
  language  = {en}
}
@article{KozhalakovaZhubanovaMansurovetal.2010,
  author    = {Kozhalakova, A. A. and Zhubanova, Azhar A. and Mansurov, Z. A. and Digel, Ilya and Tazhibayeva, S. M. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Adsorption of bacterial lipopolysaccharides on carbonized rice shell},
  series = {Science of Central Asia},
  journal   = {Science of Central Asia},
  pages     = {50 -- 54},
  year      = {2010},
  language  = {en}
}
@article{SchneiderSchneider2010,
  author    = {Schneider, Bettina and Schneider, Wilhelm},
  title     = {Die Fallstudie: Konzernrechnungslegung},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  volume    = {39},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  number    = {11},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {1495 -- 1498},
  year      = {2010},
  language  = {de}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {Robot controllers for highly dynamic environments with real-time constraints},
  series = {K{\"u}nstliche Intelligenz : KI},
  volume    = {24},
  journal   = {K{\"u}nstliche Intelligenz : KI},
  number    = {2},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-010-0041-3},
  pages     = {175 -- 178},
  year      = {2010},
  abstract  = {In this extended abstract we describe the robot programming and planning language READYLOG, a GOLOG dialect which was developed to support the decision making of robots acting in dynamic real-time domains like robotic soccer. The formal framework of READYLOG, which is based on the situation calculus, features imperative control structures like loops and procedures, allows for decision-theoretic planning, and accounts for a continuously changing world. We developed high-level controllers in READYLOG for our soccer robots in RoboCup's Middle-size league, but also for service robots and for autonomous agents in interactive computer games.},
  language  = {en}
}
@article{RensVarzinczakMeyeretal.2010,
  author    = {Rens, Gavin and Varzinczak, Ivan and Meyer, Thomas and Ferrein, Alexander},
  title     = {A Logic for Reasoning about Actions and Explicit Observations},
  series = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  journal   = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-17432-2_40},
  pages     = {395 -- 404},
  year      = {2010},
  language  = {en}
}
@article{FunkeRobinsonHendricketal.2010,
  author    = {Funke, Harald and Robinson, A. E. and Hendrick, P. and Wagemakers, R.},
  title     = {Design and Testing of a Micromix Combustor With Recuperative Wall Cooling for a Hydrogen Fuelled µ-Scale Gas Turbine},
  series = {Proceedings of the ASME Turbo Expo 2010 : presented at the 2010 ASME Turbo Expo, June 14 - 18, 2010, Glasgow, UK / sponsored by the International Gas Turbine Institute / Vol. 5: Industrial and cogeneration ; microturbines and small turbomachinery ; oil and gas applications ; wind turbine technology},
  journal   = {Proceedings of the ASME Turbo Expo 2010 : presented at the 2010 ASME Turbo Expo, June 14 - 18, 2010, Glasgow, UK / sponsored by the International Gas Turbine Institute / Vol. 5: Industrial and cogeneration ; microturbines and small turbomachinery ; oil and gas applications ; wind turbine technology},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {978-0-7918-4400-7},
  pages     = {587 -- 596},
  year      = {2010},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {golog.lua: Towards a Non-Prolog Implementation of Golog for Embedded Systems},
  publisher = {AAAI},
  address   = {Menlo Park},
  pages     = {20 -- 28},
  year      = {2010},
  language  = {en}
}
@inproceedings{AbelBoninAlbrachtetal.2010,
  author    = {Abel, Thomas and Bonin, Dominik and Albracht, Kirsten and Zeller, Sebastian and Br{\"u}ggemann, Gert-Peter and Burkett, Brendan and Str{\"u}der, Heiko K.},
  title     = {Kinematic profile of the elite handcyclist},
  series = {28th International Conference on Biomechanics in Sports, Marquette, Michigan, USA, July 19 - 23, 2010},
  booktitle = {28th International Conference on Biomechanics in Sports, Marquette, Michigan, USA, July 19 - 23, 2010},
  issn      = {1999-4168},
  pages     = {140 -- 141},
  year      = {2010},
  language  = {en}
}
@inproceedings{BegingPoghossianMlyneketal.2010,
  author    = {Beging, Stefan and Poghossian, Arshak and Mlynek, D. and Hataihimakul, S. and Pedraza, A. and Dhawan, S. and Laube, N. and Kleinen, Lisa and Baldsiefen, Gerhard and Busch, Heinrich von and Sch{\"o}ning, Michael Josef},
  title     = {Ion-selective sensors for the determination of the risk of urinary stone formation},
  series = {Micro- and Nanosystems in biochemical diagnosis : Principles and applications},
  booktitle = {Micro- and Nanosystems in biochemical diagnosis : Principles and applications},
  address   = {Warsaw},
  pages     = {74 -- 80},
  year      = {2010},
  language  = {en}
}
@article{LeimenaArtmannDachwaldetal.2010,
  author    = {Leimena, W. and Artmann, Gerhard and Dachwald, Bernd and Temiz Artmann, Ayseg{\"u}l and Gossmann, Matthias and Digel, Ilya},
  title     = {Feasibility of an in-situ microbial decontamination of an ice-melting probe},
  series = {Eurasian Chemico-Technological Journal},
  volume    = {12},
  journal   = {Eurasian Chemico-Technological Journal},
  number    = {2},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  isbn      = {1562-3920},
  doi       = {10.18321/ectj37},
  pages     = {145 -- 150},
  year      = {2010},
  abstract  = {Autonomous robotic systems for penetrating thick ice shells with simultaneous collecting of scientific data are very promising devices in both terrestrial (glacier, climate research) and extra-terrestrial applications. Technical challenges in development of such systems are numerous and include 3D-navigation, an appropriate energy source, motion control, etc. Not less important is the problem of forward contamination of the pristine glacial environments with microorganisms and biomolecules from the surface of the probe. This study was devoted to establishing a laboratory model for microbial contamination of a newly constructed ice-melting probe called IceMole and to analyse the viability and amount of the contaminating microorganisms as a function of distance. The used bacterial strains were Bacillus subtilis (ATCC 6051) and Escherichia coli (ATCC 11775). The main objective was development of an efficient and reliable in-situ decontamination method of the melting probe. Therefore, several chemical substances were tested in respect of their efficacy to eliminate bacteria on the surface of the melting probe at low temperature (0 - 5 °C) and at continuous dilution by melted water. Our study has shown that at least 99.9\% decontamination of the IceMole can be successfully achieved by the injection of 30\% (v/v) hydrogen peroxide and 3\% (v/v) sodium hypochlorite into the drilling site. We were able to reproduce this result in both time-dependent and depth-dependent experiments. The sufficient amount of 30\% (v/v) H₂O₂ or 3\% (v/v) NaClO has been found to be approximately 18 L per cm² of the probe's surface.},
  language  = {en}
}
@article{JansenBehbahaniLaumenetal.2010,
  author    = {Jansen, S. V. and Behbahani, Mehdi and Laumen, M. and Kaufmann, T. and Hormes, M. and Behr, M. and Schmitz-Rode, T. and Steinseifer, U.},
  title     = {Investigation of Steady Flow Through a Realistic Model of the Thoracic Human Aorta Using 3D Stereo PIV and CFD-Simulation},
  series = {ASAIO Journal},
  volume    = {56},
  journal   = {ASAIO Journal},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {98},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniNamWalugaetal.2010,
  author    = {Behbahani, Mehdi and Nam, J. and Waluga, C. and Behr, M. and Pasquali, M. and Mottaghy, K.},
  title     = {Modeling and Numerical Analysis of Platelet Activation, Adhesion and Aggregation in Artificial Organs},
  volume    = {56},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {85},
  year      = {2010},
  language  = {en}
}
@article{FerreinSiebelSteinbauer2010,
  author    = {Ferrein, Alexander and Siebel, Nils T. and Steinbauer, Gerald},
  title     = {Hybrid control for autonomous systems — Integrating learning, deliberation and reactive control},
  series = {Robotics and Autonomous Systems},
  volume    = {58},
  journal   = {Robotics and Autonomous Systems},
  number    = {9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0921-8890},
  doi       = {10.1016/j.robot.2010.06.003},
  pages     = {1037 -- 1038},
  year      = {2010},
  language  = {en}
}
@article{NiemuellerFerreinLakemeyer2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {A Lua-based behavior engine for controlling the humanoid robot Nao},
  series = {RoboCup 2009: Robot Soccer World Cup XIII},
  journal   = {RoboCup 2009: Robot Soccer World Cup XIII},
  publisher = {Springer},
  address   = {Heidelberg},
  doi       = {10.1007/978-3-642-11876-0_21},
  pages     = {240 -- 251},
  year      = {2010},
  language  = {en}
}
@misc{DieringerRenzLindeletal.2010,
  author    = {Dieringer, Matthias A. and Renz, Wolfgang and Lindel, Tomasz Dawid and Seifert, Frank and Frauenrath, Tobias and Waiczies, Helmar and von Knobelsdorff-Brenkhoff, Florian and Santoro, Davide and Hoffmann, Werner and Ittermann, Bernd and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {4CH TX/RX Surface Coil for 7T: Design, Optimization and Application for Cardiac Function Imaging},
  series = {2010 ISMRM-ESMRMB joint annual meeting},
  journal   = {2010 ISMRM-ESMRMB joint annual meeting},
  issn      = {1545-4428},
  year      = {2010},
  abstract  = {Practical impediments of ultra high field cardiovascular MR (CVMR) can be catalogued in exacerbated magnetic field and radio frequency (RF) inhomogeneities, susceptibility and off-resonance effects, conductive and dielectric effects in tissue, and RF power deposition constraints, which all bear the potential to spoil the benefit of CVMR at 7T. Therefore, a four element cardiac transceive surface coil array was developed. Cardiac imaging provided clinically acceptable signal homogeneity with an excellent blood myocardium contrast. Subtle anatomic structures, such as pericardium, mitral and tricuspid valves and their apparatus, papillary muscles, and trabecles were accurately delineated.},
  language  = {en}
}
@article{MaiwaldDachwald2010,
  author    = {Maiwald, Volker and Dachwald, Bernd},
  title     = {Mission design for a multiple-rendezvous mission to Jupiter's trojans},
  pages     = {3},
  year      = {2010},
  abstract  = {In this paper, we will provide a feasible mission design for a multiple-rendezvous mission to Jupiter's Trojans. It is based on solar electric propulsion, as being currently used on the DAWN spacecraft, and other flight-proven technology. First, we have selected a set of mission objectives, the prime objective being the detection of water -especially subsurface water -to provide evidence for the Trojans' formation at large solar distances. Based on DAWN and other comparable missions, we have determined suitable payload instruments to achieve these objectives. Afterwards, we have designed a spacecraft that is able to carry the selected payload to the Trojan region and rendezvous successively with three target bodies within a maximum mission duration of 15 years. Accurate low-thrust trajectories have been obtained with a global low-thrust trajectory optimization program (InTrance). During the transfer from Earth to the first target, the spacecraft is propelled by two RIT-22 ion engines from EADS Astrium, whereas a single RIT-15 is used for transfers within the Trojan region to reduce the required power. For power generation, the spacecraft uses a multi-junction solar array that is supported by concentrators. To achieve moderate mission costs, we have restricted the launch mass to a maximum of 1600 kg, the maximum interplanetary injection capability of a Soyuz/Fregat launcher. Our final layout has a mass of 1400 kg, yielding a margin of about 14\%. Nestor (a member of the L4-population) was determined as the first mission target. It can be reached within 4.6 years from launch. The fuel mass ratio for this transfer is about 35\%. The stay time at Nestor is 1.2 years. Eurymedon was selected as the second target (transfer time 3.5 years, stay time 3.0 years) and Irus as the third target (transfer time 2.2 years). The transfers within the Trojan L4-population can be accomplished with fuel mass ratios of about 3\% for each trajectory leg. Including the stay times in orbit around the targets, the mission can be accomplished within a total duration of about 14.5 years. According to our mission analysis, it is also feasible to fly to the L5-population with similar flight times. It has to be noted that -for a first analysis -we have taken only the named targets into account. Allowing also rendezvous with unnamed objects will very likely decrease the mission duration. Based on a scaling of DAWN's mission costs (due to comparable scientific instruments and mission objectives), and taking into account the longer mission duration and the potential re-use of already developed technology, we have estimated that these three rendezvous can be accomplished with a budget of about 250 Million Euros, i.e. about 25\% of ROSETTA's budget.},
  language  = {en}
}
@article{GoettscheHoffschmidtSchmitzetal.2010,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays},
  series = {Journal of solar energy engineering},
  volume    = {132},
  journal   = {Journal of solar energy engineering},
  number    = {1},
  publisher = {ASME},
  address   = {New York},
  issn      = {0199-6231},
  doi       = {10.1115/1.4000332},
  pages     = {4 Seiten},
  year      = {2010},
  abstract  = {The cost of solar tower power plants is dominated by the heliostat field making up roughly 50\% of investment costs. Classical heliostat design is dominated by mirrors brought into position by steel structures and drives that guarantee high accuracies under wind loads and thermal stress situations. A large fraction of costs is caused by the stiffness requirements of the steel structure, typically resulting in ~ 20 kg/m² steel per mirror area. The typical cost figure of heliostats (figure mentioned by Solucar at Solar Paces Conference, Seville, 2006) is currently in the area of 150 €/m² caused by the increasing price of the necessary raw materials. An interesting option to reduce costs lies in a heliostat design where all moving parts are protected from wind loads. In this way, drives and mechanical layout may be kept less robust, thereby reducing material input and costs. In order to keep the heliostat at an appropriate size, small mirrors (around 10x10 cm²) have to be used, which are placed in a box with a transparent cover. Innovative drive systems are developed in order to obtain a cost-effective design. A 0,5x0,5 m² demonstration unit will be constructed. Tests of the unit are carried out with a high-precision artificial sun unit that imitates the sun's path with an accuracy of less than 0.5 mrad and creates a beam of parallel light with a divergence of less than 4 mrad.},
  language  = {en}
}
@article{BehbahaniProbstMaietal.2010,
  author    = {Behbahani, Mehdi and Probst, M. and Mai, A. and Tran, L. and Vonderstein, K. and Keschenau, P. and Linde, T. and Steinseifer, U. and Behr, M. and Mottaghy, K.},
  title     = {The influence of high shear on thrombosis and hemolysis in artificial organs},
  series = {The International Journal of Artificial Organs},
  volume    = {33},
  journal   = {The International Journal of Artificial Organs},
  number    = {7},
  publisher = {Sage},
  address   = {Thousand Oaks},
  issn      = {0391-3988},
  pages     = {426 -- 426},
  year      = {2010},
  language  = {en}
}
@article{BoernerFunkeHendricketal.2010,
  author    = {B{\"o}rner, Sebastian and Funke, Harald and Hendrick, P. and Recker, E.},
  title     = {Control system modifications for a hydrogen fuelled gas-turbine},
  series = {Proceedings of ISROMAC 13},
  journal   = {Proceedings of ISROMAC 13},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-617-38848-4},
  pages     = {665 -- 670},
  year      = {2010},
  language  = {en}
}
@article{GeimerSauerbornHoffschmidtetal.2010,
  author    = {Geimer, Konstantin and Sauerborn, Markus and Hoffschmidt, Bernhard and Schmitz, Mark and G{\"o}ttsche, Joachim},
  title     = {Test facility for absorber specimens of solar tower power plants},
  series = {Advances in Science and Technology},
  volume    = {74},
  journal   = {Advances in Science and Technology},
  publisher = {Trans Tech Publications},
  address   = {Baech},
  doi       = {10.4028/www.scientific.net/AST.74.266},
  pages     = {266 -- 271},
  year      = {2010},
  abstract  = {The Solar-Institute J{\"u}lich (SIJ) has initiated the construction of the first and only German solar tower power plant and is now involved in the accompanying research. The power plant for experimental and demonstration purposes in the town of J{\"u}lich started supplying electric energy in the beginning of 2008. The central receiver plant features as central innovation an open volumetric receiver, consisting of porous ceramic elements that simultaneously absorb the concentrated sunlight and transfer the heat to ambient air passing through the pores so that an average temperature of 680°C is reached. The subsequent steam cycle generates up to 1.5 MWe. A main field of research at the SIJ is the optimization of the absorber structures. To analyze the capability of new absorber specimens a special test facility was developed and set up in the laboratory. A high-performance near-infrared radiator offers for single test samples a variable and repeatable beam with a power of up to 320 kW/m² peak. The temperatures achieved on the absorber surface can reach more than 1000°C. To suck ambient air through the open absorber - like on the tower - it is mounted on a special blower system. An overview about the test facility and some recent results will be presented.},
  language  = {en}
}
@article{MiyamotoKanekoMatsuoetal.2010,
  author    = {Miyamoto, Ko-ichiro and Kaneko, Kazumi and Matsuo, Akira and Wagner, Torsten and Kanoh, Shin`ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Miniaturized chemical imaging sensor system using an OLED display panel},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.160},
  pages     = {516 -- 519},
  year      = {2010},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the two-dimensional distribution of specific ions or molecules in the solution. In this study, we developed a miniaturized chemical imaging sensor system with an OLED display panel as a light source that scans the sensor plate. In the proposed configuration, the display panel is placed directly below the sensor plate and illuminates the back surface. The measured area defined by illumination can be arbitrarily customized to fit the size and the shape of the sample to be measured. The waveform of the generated photocurrent, the currentvoltage characteristics and the pH sensitivity were investigated and pH imaging with this miniaturized system was demonstrated.},
  language  = {en}
}
@article{SrivastavaSinghAggarwaletal.2010,
  author    = {Srivastava, Alok and Singh, Virendra and Aggarwal, Pranav and Schneeweiss, F. and Scherer, Ulrich W. and Friedrich, W.},
  title     = {Optical studies of insulating polymers for radiation dose monitoring},
  series = {Indian Journal of Pure and Applied Physics},
  volume    = {48},
  journal   = {Indian Journal of Pure and Applied Physics},
  number    = {11},
  publisher = {Council Of Scientific And Industrial Research (CSIR), National Institute Of Science Communication and Policy Research (NIScPR)},
  address   = {New Delhi},
  isbn      = {0019-5596},
  pages     = {782 -- 786},
  year      = {2010},
  abstract  = {The optical study carried out on insulating polymers namely polyethyleneterephthalate (PET) and polyvinylchloride (PVC) has been described. The polymers are exposed to different radiation doses by exposing them to swift heavy ions of carbon (90 MeV), silicon (120 MeV) and nickel (100 MeV) which influence on their optical properties. The studies show that amongst the investigated polymers, PVC and PET have potential for application as dosimeter beyond a threshold dose which is strongly dependent on the nature of the material and the radiation type. The optical micrographs show a distinct change in colour of the sample with increase in radiation dose.},
  language  = {en}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5 B},
  journal   = {Physics Procedia},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2010.08.082},
  pages     = {543 -- 549},
  year      = {2010},
  abstract  = {Additive Manufacturing of metal parts by Selective Laser Melting has become a powerful tool for the direct manufacturing of complex parts mainly for the aerospace and medical industry. With the introduction of its desktop machine, Realizer targeted the dental market. The contribution describes the special features of the machine, discusses details of the process and shows manufacturing results focused on metal dental devices.},
  language  = {en}
}
@article{AlexopoulosHoffschmidt2010,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Solarthermische Kraftwerke mit thermischen Speichern},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {1522-2640},
  doi       = {10.1002/cite.201050678},
  pages     = {1606},
  year      = {2010},
  abstract  = {Solarthermische Kraftwerke stellen eine bedeutende Technologieoption f{\"u}r einen nachhaltigen Energiemix der Zukunft dar. Sie konzentrieren die Strahlung der Sonne, erzeugen W{\"a}rme und wandeln diese mit konventioneller Kraftwerkstechnik in Strom um. Die W{\"a}rme kann auch gespeichert werden, so dass der Betrieb w{\"a}hrend des Durchzugs von Wolken m{\"o}glich ist und bis in die Abendstunden hinein verl{\"a}ngert werden kann. Zu den solarthermischen Kraftwerken geh{\"o}ren neben der Parabolrinne und dem Solarturm der Fresnel-Kollektor und die Dish-Stirling-Systeme. Im Zuge einer sp{\"a}teren Vergr{\"o}ßerung des Solarfeldes von Solarkraftwerken kann mithilfe von thermischen Energiespeichern die solare Energieerzeugung bei gleichbleibender Kraftwerksleistung sukzessiv bis um den Faktor 3 erweitert werden. Es besteht so die M{\"o}glichkeit einer massiven Substitution von fossilen Brennstoffen.Bei den ersten solarthermischen Speichern f{\"u}r die SEGS-Parabolrinnekraftwerke wurde {\"O}l als Speichermedium eingesetzt. Ein weiteres Speichermedium ist Salzschmelze, die im Andasol-1-Projekt in Spanien sowie bei Solarturmkraftwerken eingesetzt wird. Beton ist ein weiteres m{\"o}gliches Speichermaterial f{\"u}r Parabolrinnensysteme. Eine weitere Alternative bei einem Solarturmkraftwerk mit Luft als W{\"a}rmetr{\"a}germedium ist die Verwendung von keramischen Feuerfestmaterialien in Form von Sch{\"u}ttungen oder stapelbaren, por{\"o}sen Elementen. In J{\"u}lich wurde das weltweit erste solarthermische Turmkraftwerk mit einer Leistung von 1,5 MWe, das Luft als W{\"a}rmetr{\"a}germedium einsetzt und einen solchen Speicher verwendet, gebaut.},
  language  = {de}
}
@article{PoghossianWagnerSchoening2010,
  author    = {Poghossian, Arshak and Wagner, Holger and Sch{\"o}ning, Michael Josef},
  title     = {Automatisiertes „wafer level"-Testsystem zur Charakterisierung von siliziumbasierten Chemo- und Biosensoren},
  series = {Tagungsband: Sensoren und Messsysteme 2010},
  journal   = {Tagungsband: Sensoren und Messsysteme 2010},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-3260-9},
  pages     = {89 -- 92},
  year      = {2010},
  abstract  = {Es wurde ein automatisiertes, computerunterst{\"u}tztes Testsystem f{\"u}r die Funktionspr{\"u}fung und Charakterisierung von (bio-)chemischen Sensoren auf Waferebene entwickelt und in einen konventionellen Spitzenmessplatz integriert. Das System erm{\"o}glicht die Charakterisierung und Identifizierung „funktionstauglicher" Sensoren bereits auf Waferebene zwischen den einzelnen Herstellungsschritten, wodurch weitere, bisher {\"u}bliche Verarbeitungsschritte wie das Fixieren, Bonden und Verkapseln f{\"u}r die defekten oder nicht funktionstauglichen Sensorstrukturen entf{\"a}llt. Außerdem bietet eine speziell entworfene miniaturisierte Durchflussmesszelle die M{\"o}glichkeit, bereits auf Waferlevel die Sensitivit{\"a}t, Drift, Hysterese und Ansprechzeit der (bio-)chemischen Sensoren zu charakterisieren. Das System wurde exemplarisch mit kapazitiven, pH-sensitiven EIS- (Elektrolyt-Isolator-Silizium) Strukturen und ISFET- (ionensensitiver Feldeffekttransistor) Strukturen mit verschiedenen Geometrien und Gate-Layouts getestet.},
  language  = {de}
}
@article{KirchnerOberlaenderFriedrichetal.2010,
  author    = {Kirchner, Patrick and Oberl{\"a}nder, Jan and Friedrich, Peter and Rysstad, Gunnar and Berger, J{\"o}rg and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Realization of a calorimetric gas sensor on polyimide foil for applications in aseptic food industry},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.098},
  pages     = {264 -- 267},
  year      = {2010},
  abstract  = {A calorimetric gas sensor is presented for the monitoring of gas-phase H2O2 at elevated temperature during sterilization processes in aseptic food industry. The sensor consists of two temperature-sensitive thin-film resistances built up on a polyimide foil with a thickness of 25 μm, which are passivated with a layer of SU-8 photo resist and catalytically activated with manganese(IV) oxide. Instead of an active heating structure, the calorimetric sensor utilizes the elevated temperature of an evaporated H2O2 aerosol. In an experimental set-up, the sensor has shown a sensitivity of 4.78 °C/(\%v/v) in a H2O2 concentration range of 0 to 10\% v/v at an evaporation temperature of 240 ∘C. Furthermore, the sensor possesses the same, unchanged sensor signal even at varied evaporation temperatures of the gas stream. The sensor characterization demonstrates the suitability of the calorimetric gas sensor for monitoring the efficiency of sterilization processes.},
  language  = {en}
}
@article{WagnerMiyamotoSchoeningetal.2010,
  author    = {Wagner, Torsten and Miyamoto, Ko-ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Novel combination of digital light processing (DLP) and light-addressable potentiometric sensors (LAPS) for flexible chemical imaging},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.161},
  pages     = {520 -- 523},
  year      = {2010},
  abstract  = {Chemical imaging systems allow the visualisation of the distribution of chemical species on the sensor surface. This work represents a new flexible approach of read out in a light-addressable potentiometric sensor (LAPS) with the help of a digital light processing (DLP) set-up. The DLP, known well for video projectors, consists of a mirror-array MEMS device which allows fast and flexible generation of light patterns. With the help of these light patterns the sensor surface of the LAPS device can be read out sequentially in a raster like scheme (scanning LAPS). The DLP approach has several advantages compared to conventional scanning LAPS set-ups, e.g., the spot size, the shape and the intensity of the light pointer can be changed easily and no mechanical movement is necessary, which reduces the size of the set-up and increases the stability and speed of measurement.},
  language  = {en}
}
@article{BohrnStuetzFleischeretal.2010,
  author    = {Bohrn, Ulrich and St{\"u}tz, Evamaria and Fleischer, Maximilian and Sch{\"o}ning, Michael Josef},
  title     = {Real-time detection of CO by eukaryotic cells},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  pages     = {17 -- 20},
  year      = {2010},
  abstract  = {In this contribution, we focus on the detection of toxic gases with living eukaryotic cells. A cell-based gas sensor system, able to measure the effects of direct exposure of gases to cells in real-time, was set up. Impedance data as well as oxygen consumption of Chinese hamster lung fibroblast cells (V79) were analysed upon exposure to carbon monoxide (CO). The CO (diluted in wet synthetic air) affects the cell respiration as indicated by an attenuated respiration signal after the CO exposure as well as an instant increase of the capacitive part of the impedance signal during the gas exposure.},
  language  = {en}
}