@article{BehbahaniMaiWalugaetal.2010,
  author    = {Behbahani, Mehdi and Mai, A. and Waluga, C. and Bergmann, B. and Tran, L. and Vonderstein, K. and Behr, M. and Mottaghy, K.},
  title     = {Numerical Modeling of Flow-Related Thrombus Formation under Physiological and Non-Physiological Flow Conditions},
  series = {Acta Physiologica},
  volume    = {198},
  journal   = {Acta Physiologica},
  number    = {Supplement 677},
  isbn      = {1748-1716},
  pages     = {185},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniNamWalugaetal.2010,
  author    = {Behbahani, Mehdi and Nam, J. and Waluga, C. and Behr, M. and Pasquali, M. and Mottaghy, K.},
  title     = {Modeling and Numerical Analysis of Platelet Activation, Adhesion and Aggregation in Artificial Organs},
  volume    = {56},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {85},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniProbstMaietal.2010,
  author    = {Behbahani, Mehdi and Probst, M. and Mai, A. and Behr, M. and Tran, L. and Vonderstein, K. and Mottaghy, K.},
  title     = {Numerical Prediction of Blood Damage in Biomedical Devices},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniProbstMaietal.2010,
  author    = {Behbahani, Mehdi and Probst, M. and Mai, A. and Tran, L. and Vonderstein, K. and Keschenau, P. and Linde, T. and Steinseifer, U. and Behr, M. and Mottaghy, K.},
  title     = {The influence of high shear on thrombosis and hemolysis in artificial organs},
  series = {The International Journal of Artificial Organs},
  volume    = {33},
  journal   = {The International Journal of Artificial Organs},
  number    = {7},
  publisher = {Sage},
  address   = {Thousand Oaks},
  issn      = {0391-3988},
  pages     = {426 -- 426},
  year      = {2010},
  language  = {en}
}
@article{BenzelLinzbach2010,
  author    = {Benzel, Ute and Linzbach, Meike},
  title     = {Bilanzierung und Offenlegung von Ertragsteuerrisiken - Quo vadis? Unsichere Steuerpositionen in der Rechnungslegung nach IFRS, US-GAAP und HGB},
  series = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung},
  journal   = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung},
  number    = {11},
  issn      = {1862-5533},
  pages     = {475 -- 523},
  year      = {2010},
  abstract  = {In den letzten drei bis vier Jahren unterlag der Bereich der Bilanzierung und Offenlegung von unsicheren Steuerpositionen im IFRS- und US-GAAP-Abschluss einem stetigen Wandel. Sowohl nach US-GAAP als auch nach IFRS nehmen die Anforderungen an die Bilanzierung und Offenlegung best{\"a}ndig zu. Schon allein dies zeigt die Bedeutung, die dem Themenbereich der Steuerrisiken beigemessen wird. Aber nicht nur im Rahmen der Berichterstattung im Jahresabschluss stehen Steuerrisiken oben auf der Agenda, auch der amerikanische Internal Revenue Service (IRS) verfolgt das Thema sehr konsequent und plant, bestimmte Unternehmen zu Angaben von Steuerrisiken im Rahmen der Steuererkl{\"a}rungen zu verpflichten. Der Aufsatz befasst sich mit den neueren Entwicklungen im Bereich der Bilanzierung und Offenlegung von unsicheren Steuerpositionen in der Rechnungslegung nach IFRS, US-GAAP und HGB und der Offenlegung von Steuerrisiken im Rahmen der Steuererkl{\"a}rung.},
  language  = {de}
}
@incollection{BergenerDelfmannEggertetal.2010,
  author    = {Bergener, Philipp and Delfmann, Patrick and Eggert, Mathias and Fritz, Fleur and Heddier, Marcel and Herring, Eva-Maria and Hofmann, Sara and Knackstedt, Ralf and Meil{\"a}nder, Dominique and Meyer, Eric and R{\"a}ckers, Michael and Seiler, Julia},
  title     = {Forschungsperspektiven im Kontext Informationstechnik und Recht},
  series = {IT-Risiken: Ursachen, Methoden, Forschungsperspektiven, Arbeitsberichte des Instituts f{\"u}r Wirtschaftsinformatik},
  booktitle = {IT-Risiken: Ursachen, Methoden, Forschungsperspektiven, Arbeitsberichte des Instituts f{\"u}r Wirtschaftsinformatik},
  number    = {128},
  editor    = {Becker, J{\"o}rg and Bergener, Philipp and Eggert, Mathias and Heddier, Marcel and Hofmann, Sara and Knackstedt, Ralf and R{\"a}ckers, Michael},
  publisher = {Institut f{\"u}r Wirtschaftsinformatik},
  address   = {M{\"u}nster},
  issn      = {1438-3985},
  pages     = {115 -- 147},
  year      = {2010},
  language  = {de}
}
@article{Bernecker2010,
  author    = {Bernecker, Andreas},
  title     = {A European Private Company: Is Europe's single legal form for SMEs close to approval?},
  series = {Research Briefing},
  journal   = {Research Briefing},
  publisher = {Deutsche Bank Research},
  address   = {Frankfurt a. M.},
  issn      = {2193-5955},
  year      = {2010},
  abstract  = {This Research Briefing, issued in July 2010, concluded that: - Small and medium-sized enterprises (SMEs) in Europe have long called for a matching legal form valid across the EU (similar to that of the European company (SE) for large firms) - The main benefits would be the availability of uniform Europe-wide company structures, significant cost reductions for businesses and further integration of the internal market - Given the differing national views regarding the concrete features of the new legal form there is currently no sign of an agreement being reached at the European level in the short term; however, it is possible that progress will be made in negotiations during the year - The key issues being discussed in depth are company formation, transnationality and employee participation rights in the new European private company (SPE).},
  language  = {en}
}
@article{BerretzSkorupaSanderetal.2010,
  author    = {Berretz, F. and Skorupa, S. and Sander, Volker and Belloum, A.},
  title     = {Towards an actor-driven workflow management system for grids},
  series = {International Symposium on Collaborative Technologies and Systems (CTS), 2010 : 17 - 21 May 2010, Chicago, Illinois, USA / IEEE},
  journal   = {International Symposium on Collaborative Technologies and Systems (CTS), 2010 : 17 - 21 May 2010, Chicago, Illinois, USA / IEEE},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-6619-1},
  pages     = {611 -- 616},
  year      = {2010},
  language  = {en}
}
@article{BialonskiHorstmannLehnertz2010,
  author    = {Bialonski, Stephan and Horstmann, Marie-Therese and Lehnertz, Klaus},
  title     = {From brain to earth and climate systems: Small-world interaction networks or not?},
  series = {Chaos: An Interdisciplinary Journal of Nonlinear Science},
  volume    = {20},
  journal   = {Chaos: An Interdisciplinary Journal of Nonlinear Science},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1089-7682},
  doi       = {10.1063/1.3360561},
  pages     = {013134},
  year      = {2010},
  abstract  = {We consider recent reports on small-world topologies of interaction networks derived from the dynamics of spatially extended systems that are investigated in diverse scientific fields such as neurosciences, geophysics, or meteorology. With numerical simulations that mimic typical experimental situations, we have identified an important constraint when characterizing such networks: indications of a small-world topology can be expected solely due to the spatial sampling of the system along with the commonly used time series analysis based approaches to network characterization.},
  language  = {en}
}
@article{BienerSasseWemhoff2010,
  author    = {Biener, Ernst and Sasse, Torsten and Wemhoff, Thomas},
  title     = {Deponie auf Deponie - Technische und genehmigungsrechtliche Aspekte},
  series = {Band 19: Abschluss und Rekultivierung von Deponien und Altlasten 2010 : Die Umsetzung der neuen Deponieverordnung - praktische Erfahrungen im Vollzug und erste {\"A}nderungsverordnung zur neuen DepV ; Beitr{\"a}ge zum Seminar am 13. und 14. Oktober 2010 in Karlsruhe},
  journal   = {Band 19: Abschluss und Rekultivierung von Deponien und Altlasten 2010 : Die Umsetzung der neuen Deponieverordnung - praktische Erfahrungen im Vollzug und erste {\"A}nderungsverordnung zur neuen DepV ; Beitr{\"a}ge zum Seminar am 13. und 14. Oktober 2010 in Karlsruhe},
  editor    = {Egloffstein, Thomas},
  publisher = {ICP-Eigenverlag},
  address   = {Karlsruhe},
  isbn      = {978-3-939662-08-2},
  pages     = {73 -- 84},
  year      = {2010},
  language  = {de}
}
@inproceedings{BitzKraffOrzadaetal.2010,
  author    = {Bitz, Andreas and Kraff, O. and Orzada, S. and Maderwald, S. and Brote, I. and Ladd, M.},
  title     = {Experimental and Numerical Assessment of RF Safety of Transmit Coils at 7 Tesla},
  series = {ISMRM workshop on MR safety 2010 : RF heating of the human in MRI : workshop series. The Washington County Historic Courthouse, Stillwater, Minnesota, USA, 15 - 17 October 2010},
  booktitle = {ISMRM workshop on MR safety 2010 : RF heating of the human in MRI : workshop series. The Washington County Historic Courthouse, Stillwater, Minnesota, USA, 15 - 17 October 2010},
  isbn      = {978-1-62276-088-6},
  pages     = {195},
  year      = {2010},
  language  = {en}
}
@article{BlomeChiconeHehletal.2010,
  author    = {Blome, Hans-Joachim and Chicone, Carmen and Hehl, Friedrich W. and Mashhoon, Bahram},
  title     = {Nonlocal modification of Newtonian gravity},
  series = {Physical Review D},
  volume    = {81},
  journal   = {Physical Review D},
  number    = {6},
  isbn      = {0556-2821},
  pages     = {065020},
  year      = {2010},
  language  = {en}
}
@article{BohrnStuetzFleischeretal.2010,
  author    = {Bohrn, Ulrich and St{\"u}tz, Evamaria and Fleischer, Maximilian and Sch{\"o}ning, Michael Josef},
  title     = {Real-time detection of CO by eukaryotic cells},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  pages     = {17 -- 20},
  year      = {2010},
  abstract  = {In this contribution, we focus on the detection of toxic gases with living eukaryotic cells. A cell-based gas sensor system, able to measure the effects of direct exposure of gases to cells in real-time, was set up. Impedance data as well as oxygen consumption of Chinese hamster lung fibroblast cells (V79) were analysed upon exposure to carbon monoxide (CO). The CO (diluted in wet synthetic air) affects the cell respiration as indicated by an attenuated respiration signal after the CO exposure as well as an instant increase of the capacitive part of the impedance signal during the gas exposure.},
  language  = {en}
}
@article{BolikLinzbach2010,
  author    = {Bolik, Andreas and Linzbach, Meike},
  title     = {Verluste und Zinsschranke in der Bilanzierung latenter Steuern},
  series = {Deutsches Steuerrecht : DStR ; Wochenschrift \& umfassende Datenbank f{\"u}r Steuerberater ; Steuerrecht, Wirtschaftsrecht, Betriebswirtschaft, Beruf ; Organ der Bundessteuerberaterkammer},
  volume    = {48},
  journal   = {Deutsches Steuerrecht : DStR ; Wochenschrift \& umfassende Datenbank f{\"u}r Steuerberater ; Steuerrecht, Wirtschaftsrecht, Betriebswirtschaft, Beruf ; Organ der Bundessteuerberaterkammer},
  number    = {31},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0012-1347},
  pages     = {1587 -- 1590},
  year      = {2010},
  abstract  = {Latente Steuern stellen eine Schnittstelle zwischen handelsrechtlicher Rechnungslegung und Steuerrecht dar. Das Verh{\"a}ltnis von Handels- und Steuerrecht ist dabei keinesfalls stetig; vielmehr fordert die Dynamik des deutschen Steuerrechts in vielen Bereichen regelm{\"a}ßige Anpassungen in der Bilanzierung in Handels- und Steuerbilanz. Dies gilt insbesondere f{\"u}r die Bilanzierung latenter Steuern im handelsrechtlichen Jahresabschluss, welche durch das BilMoG deutlich an Bedeutung gewonnen hat. Neben latenten Steuern auf tempor{\"a}re Differenzen ist es nunmehr erforderlich, Verlustvortr{\"a}ge und die Folgen der Zinsschranke bei der Berechnung latenter Steuern zu ber{\"u}cksichtigen. Der nachfolgende Beitrag geht auf die Ber{\"u}cksichtigung von Verlust- und Zinsvortr{\"a}gen und die Ber{\"u}cksichtigungsf{\"a}higkeit von EBITDA-Vortr{\"a}gen bei der Berechnung latenter Steuern ein und beleuchtet dabei insbesondere auch praktische Fragestellungen.},
  language  = {de}
}
@book{BoonzaaijerHelmigBergerhausenetal.2010,
  author    = {Boonzaaijer, Karel and Helmig, Ilka and Bergerhausen, Johannes and Beudaert, Matthieu},
  title     = {Vision - space for imagination},
  publisher = {Stichting Kunstboek},
  address   = {Oostkamp},
  isbn      = {978-90-5856-357-6},
  pages     = {[85] S. : zahlr. Ill.},
  year      = {2010},
  language  = {en}
}
@inproceedings{BorggraefeDachwald2010,
  author    = {Borggr{\"a}fe, Andreas and Dachwald, Bernd},
  title     = {Mission performance evaluation for solar sails using a refined SRP force model with variable optical coefficients},
  series = {2nd International Symposium on Solar Sailing},
  booktitle = {2nd International Symposium on Solar Sailing},
  pages     = {1 -- 6},
  year      = {2010},
  abstract  = {Solar sails provide ignificant advantages over other low-thrust propulsion systems because they produce thrust by the momentum exchange from solar radiation pressure (SRP) and thus do not consume any propellant.The force exerted on a very thin sail foil basically depends on the light incidence angle. Several analytical SRP force models that describe the SRP force acting on the sail have been established since the 1970s. All the widely used models use constant optical force coefficients of the reflecting sail material. In 2006,MENGALI et al. proposed a refined SRP force model that takes into account the dependancy of the force coefficients on the light incident angle,the sail's distance from the sun (and thus the sail emperature) and the surface roughness of the sail material [1]. In this paper, the refined SRP force model is compared to the previous ones in order to identify the potential impact of the new model on the predicted capabilities of solar sails in performing low-cost interplanetary space missions. All force models have been implemented within InTrance, a global low-thrust trajectory optimization software utilizing evolutionary neurocontrol [2]. Two interplanetary rendezvous missions, to Mercury and the near-Earth asteroid 1996FG3, are investigated. Two solar sail performances in terms of characteristic acceleration are examined for both scenarios, 0.2 mm/s2 and 0.5 mm/s2, termed "low" and "medium" sail performance. In case of the refined SRP model, three different values of surface roughness are chosen, h = 0 nm, 10 nm and 25 nm. The results show that the refined SRP force model yields shorter transfer times than the standard model.},
  language  = {en}
}
@article{BouquegneauKernRousseau2010,
  author    = {Bouquegneau, Christian and Kern, Alexander and Rousseau, Alain},
  title     = {Lightning safety guidelines},
  pages     = {6 Seiten},
  year      = {2010},
  abstract  = {This paper introduces lightning to the layman, noting the right behaviour in front of thunderstorms as well as protective measures against lightning. It also contributes to the prevention of lightning injuries and damages. This report was prepared by the authors inside the AHG1 Group for IEC TC81 (Lightning Protection).},
  language  = {en}
}
@inproceedings{BragardConradDeDoncker2010,
  author    = {Bragard, Michael and Conrad, M. and De Doncker, R. W.},
  title     = {The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off},
  series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-5286-6 (Print)},
  doi       = {10.1109/ECCE.2010.5618410},
  pages     = {4551 -- 4557},
  year      = {2010},
  language  = {en}
}
@inproceedings{BragardSoltauDeDonckeretal.2010,
  author    = {Bragard, Michael and Soltau, N. and De Doncker, R. W. and Schmiegel, A.},
  title     = {Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter},
  series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-5286-6 (Print)},
  doi       = {10.1109/ECCE.2010.5618220},
  pages     = {2944 -- 2949},
  year      = {2010},
  language  = {en}
}
@article{BragardSoltauThomasetal.2010,
  author    = {Bragard, Michael and Soltau, N. and Thomas, S. and De Doncker, R. W.},
  title     = {The balance of renewable sources and user demands in grids : power electronics for modular battery energy storage systems},
  series = {IEEE transactions on power electronics},
  volume    = {25},
  journal   = {IEEE transactions on power electronics},
  number    = {12},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2010.2085455},
  pages     = {3049 -- 3056},
  year      = {2010},
  abstract  = {The continuously growing amount of renewable sources starts compromising the stability of electrical grids. Contradictory to fossil fuel power plants, energy production of wind and photovoltaic (PV) energy is fluctuating. Although predictions have significantly improved, an outage of multi-MW offshore wind farms poses a challenging problem. One solution could be the integration of storage systems in the grid. After a short overview, this paper focuses on two exemplary battery storage systems, including the required power electronics. The grid integration, as well as the optimal usage of volatile energy reserves, is presented for a 5- kW PV system for home application, as well as for a 100- MW medium-voltage system, intended for wind farm usage. The efficiency and cost of topologies are investigated as a key parameter for large-scale integration of renewable power at medium- and low-voltage.},
  language  = {en}
}
@inproceedings{BuckWurmhoeringerLehleetal.2010,
  author    = {Buck, R. and Wurmh{\"o}ringer, K. and Lehle, R. and Pfahl, A. and G{\"o}ttsche, Joachim and Meyr, T.},
  title     = {Development of a 30m2 heliostat with hydraulic drive},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {74 -- 75},
  year      = {2010},
  language  = {en}
}
@incollection{BudaSchuermannWollert2010,
  author    = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Wireless technologies in factory automation},
  series = {Factory automation / ed. by Javier Silvestre-Blanes},
  booktitle = {Factory automation / ed. by Javier Silvestre-Blanes},
  publisher = {Intech},
  address   = {London},
  isbn      = {978-953-7619-42-8},
  pages     = {29 -- 50},
  year      = {2010},
  language  = {en}
}
@inproceedings{Bung2010,
  author    = {Bung, Daniel Bernhard},
  title     = {A comparative study of self-aerated stepped spillway and smooth invert chute flow: the effect of step-induced macro roughness},
  series = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  booktitle = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  publisher = {Univ. Press},
  address   = {Tianjin},
  organization    = {Chinese-German Joint Symposium on Hydraulic and Ocean Engineering <5, 2010, Tianjin>},
  isbn      = {978-7-5618-3671-2},
  pages     = {451 -- 456},
  year      = {2010},
  language  = {en}
}
@inproceedings{BungOertelSchlenkhoffetal.2010,
  author    = {Bung, Daniel Bernhard and Oertel, M. and Schlenkhoff, A. and Schlurmann, Torsten},
  title     = {Flash flood awareness and prevention in Germany},
  series = {Early warning for flash floods : international workshop, Praha 2011 : workshop proceedings},
  booktitle = {Early warning for flash floods : international workshop, Praha 2011 : workshop proceedings},
  editor    = {Obrusnik, Ivan},
  organization    = {Czech Hydrometeorological Institute},
  isbn      = {978-80-86690-91-9},
  pages     = {34 -- 40},
  year      = {2010},
  language  = {en}
}
@inproceedings{BungSchlenkhoff2010,
  author    = {Bung, Daniel Bernhard and Schlenkhoff, Andreas},
  title     = {Self-aerated skimming flow on embankment stepped spillways : the effect of additional micro-roughness on energy dissipation and oxygen transfer},
  series = {Proceedings from first IAHR European congress : May 2010, Edinburgh},
  booktitle = {Proceedings from first IAHR European congress : May 2010, Edinburgh},
  publisher = {Heriot-Watt University, School of the Built Environment},
  address   = {Edinburgh},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {9780956595102},
  pages     = {Artikelkennnummer HSIIId},
  year      = {2010},
  language  = {en}
}
@inproceedings{BungSchlenkhoff2010,
  author    = {Bung, Daniel Bernhard and Schlenkhoff, Andreas},
  title     = {Selbstbel{\"u}ftete Gerinnestr{\"o}mungen auf Treppenschussrinnen},
  series = {Talsperren im Wandel : 15. Deutsches Talsperrensymposium ; Beitr{\"a}ge zur Tagung am 14. bis 16. April 2010 im Eurogress Aachen},
  booktitle = {Talsperren im Wandel : 15. Deutsches Talsperrensymposium ; Beitr{\"a}ge zur Tagung am 14. bis 16. April 2010 im Eurogress Aachen},
  organization    = {Deutsches TalsperrenKomitee},
  isbn      = {978-3-8322-9043-6},
  pages     = {39 -- 47},
  year      = {2010},
  language  = {de}
}
@article{BuniatyanAbouzarMartirosyanetal.2010,
  author    = {Buniatyan, Vahe V. and Abouzar, Maryam H. and Martirosyan, Norayr W. and Schubert, J{\"u}rgen and Gevorgian, Spartak and Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {pH-sensitive properties of barium strontium titanate (BST) thin films prepared by pulsed laser deposition technique},
  series = {Physica Status Solidi (A). 207 (2010), H. 4},
  journal   = {Physica Status Solidi (A). 207 (2010), H. 4},
  isbn      = {1862-6300},
  pages     = {824 -- 830},
  year      = {2010},
  language  = {en}
}
@article{Butenweg2010,
  author    = {Butenweg, Christoph},
  title     = {Bewertung der Erdbebensicherheit von bestehenden Bauwerken},
  series = {{\"O}sterreichische Ingenieur- und Architekten-Zeitschrift : {\"O}IAZ ; Zeitschr. d. {\"O}IAV / {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  volume    = {155},
  journal   = {{\"O}sterreichische Ingenieur- und Architekten-Zeitschrift : {\"O}IAZ ; Zeitschr. d. {\"O}IAV / {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  number    = {1-3 und 4-6},
  publisher = {{\"O}AIV},
  address   = {Wien},
  issn      = {0721-9415},
  pages     = {11 -- 17},
  year      = {2010},
  language  = {de}
}
@article{ButenwegFaeckeFehlingetal.2010,
  author    = {Butenweg, Christoph and F{\"a}cke, Andreas and Fehling, Ekkehard and Gellert, Christoph and Gierga, Michael and Meyer, Udo and R{\"u}tschlin, Andreas H. and St{\"u}rz, Jochen},
  title     = {Energieeffizient und erdbebensicher Bauen mit monolithischem Ziegelmauerwerk},
  series = {Mauerwerk : European journal of masonry},
  volume    = {14},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {1},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1432-3427},
  doi       = {10.1002/dama.201000456},
  pages     = {3 -- 9},
  year      = {2010},
  abstract  = {Moderne Bauwerke m{\"u}ssen heute eine hohe energetische Leistungsf{\"a}higkeit aufweisen und gleichzeitig alle einwirkenden Lasten sicher abtragen. Dies stellt insbesondere in Erdbebengebieten hohe Anforderungen an die verwendeten Baustoffe. Am baupraktischen Beispiel einer Doppelhaush{\"a}lfte wird demonstriert, dass die Symbiose aus energieeffizientem und gleichzeitig erdbebensicherem Bauen in der h{\"o}chsten deutschen Erdbebenzone mit monolithischem Ziegelmauerwerk gut realisierbar ist. Als Ziegelmauerwerk werden f{\"u}r die Außenw{\"a}nde w{\"a}rmetechnisch optimierte Hochlochziegel verwendet, die sowohl die Anforderungen der Energieeinsparverordnung 2009 als auch die Anforderungen an Mauerwerkbaustoffe nach den aktuellen Erdbebennormen erf{\"u}llen. Der Erdbebennachweis der Doppelhaush{\"a}lfte erfolgt mit einem nichtlinearen Nachweisverfahren, das f{\"u}r eine einfache praktische Anwendung programmtechnisch umgesetzt wurde. F{\"u}r den Nachweis wurden aus zyklischen Schubwandversuchen ermittelte Last-Verformungskurven verwendet. Das gesamte in Deutschland noch nicht normativ geregelte Nachweiskonzept wurde im Rahmen einer Zustimmung im Einzelfall gepr{\"u}ft und genehmigt.},
  language  = {de}
}
@incollection{ButenwegGellertMeyer2010,
  author    = {Butenweg, Christoph and Gellert, Christoph and Meyer, Udo},
  title     = {Erdbebenbemessung bei Mauerwerksbauten},
  series = {Mauerwerk-Kalender 2010: Normen f{\"u}r Bemessung und Ausf{\"u}hrung},
  booktitle = {Mauerwerk-Kalender 2010: Normen f{\"u}r Bemessung und Ausf{\"u}hrung},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {3-433-60040-6 ; 978-3-433-60040-5},
  doi       = {10.1002/9783433600405.ch7},
  pages     = {141 -- 167},
  year      = {2010},
  language  = {de}
}
@article{ButenwegGellertSchlundt2010,
  author    = {Butenweg, Christoph and Gellert, Christoph and Schlundt, Andreas},
  title     = {Nichtlinearer Erdbebennachweis von Geb{\"a}uden aus Kalksandsteinmauerwerk nach DIN EN 1998},
  series = {Mauerwerk : European journal of masonry},
  volume    = {14},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1432-3427},
  doi       = {10.1002/dama.201000463},
  pages     = {120 -- 125},
  year      = {2010},
  abstract  = {Die Erdbebensicherheit von Geb{\"a}uden aus Kalksandsteinmauerwerk ist aktuell nach DIN 4149 mit linearen Verfahren nachzuweisen. Dies f{\"u}hrt in der praktischen Anwendung zu großen Problemen, da selbst traditionell {\"u}bliche Grundrisse teilweise nicht mehr ohne zus{\"a}tzliche Maßnahmen nachweisbar sind. Zur L{\"o}sung dieser Problematik wurden von der deutschen Mauerwerksindustrie auf nationaler und europ{\"a}ischer Ebene Forschungsprojekte initiiert, deren Ergebnisse in Form von statisch nichtlinearen Verfahren Eingang in den Nationalen Anhang zur DIN EN 1998-1 [12] gefunden haben. Mit den Verfahren wird die Nachweissituation zuk{\"u}nftig grundlegend verbessert, da mit diesen die Tragwerksreserven wesentlich besser ausgenutzt werden k{\"o}nnen. Im Folgenden wird die Anwendung der Verfahren am Beispiel einer Reihenhauszeile aus Kalksandsteinmauerwerk demonstriert. Der Nachweis der Reihenh{\"a}user wurde im Rahmen einer Zustimmung im Einzelfall, die vom Bundesverband Kalksandsteinindustrie eV in Hannover koordiniert wurde, durch unabh{\"a}ngige Gutachter und die Bauaufsicht eingehend gepr{\"u}ft und f{\"u}r richtig befunden. Die Durchf{\"u}hrung des Nachweises erfolgte auf Grundlage eines an der RWTH Aachen entwickelten neuen Nachweiskonzeptes. Die baupraktische Anwendbarkeit und einfache Nachvollziehbarkeit dieses Konzepts ist durch eine softwaretechnische Umsetzung sichergestellt.},
  language  = {de}
}
@book{BuyerKleinMueller2010,
  author    = {Buyer, Christoph and Klein, Hartmut and M{\"u}ller, Thomas},
  title     = {{\"A}nderung der Unternehmensform : Handbuch zum Umwandlungs- und Umwandlungssteuerrecht},
  edition   = {8. Aufl.},
  publisher = {Verl. Neue Wirtschafts-Briefe},
  address   = {Herne},
  isbn      = {978-3-482-42258-4},
  pages     = {XL, 585 S.},
  year      = {2010},
  language  = {de}
}
@article{BaeckerPoghossianAbouzaretal.2010,
  author    = {B{\"a}cker, Matthias and Poghossian, Arshak and Abouzar, Maryam H. and Wenmackers, Sylvia and Janssens, Stoffel D. and Haenen, Ken and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Capacitive field-effect (bio-)chemical sensors based on nanocrystalline diamond films},
  series = {Diamond Electronics and Bioelectronics — Fundamentals to Applications III, edited by P. Bergonzo, [u.a.]},
  journal   = {Diamond Electronics and Bioelectronics — Fundamentals to Applications III, edited by P. Bergonzo, [u.a.]},
  pages     = {1 -- 6},
  year      = {2010},
  language  = {en}
}
@article{BaeckerPoghossianSchoeningetal.2010,
  author    = {B{\"a}cker, Matthias and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Schnitzler, Thomas and Biselli, Manfred and Zang, Werner and Wagner, Patrick},
  title     = {Entwicklung eines modularen festk{\"o}rperbasierten Sensorsystems f{\"u}r die {\"U}berwachung von Zellkulturfermentationen},
  series = {Tagungsband: Sensoren und Messsysteme 2010},
  journal   = {Tagungsband: Sensoren und Messsysteme 2010},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-3260-9},
  pages     = {688 -- 698},
  year      = {2010},
  abstract  = {In diesem Beitrag werden Ergebnisse der Entwicklung eines modularen festk{\"o}rperbasierten Sensorsystems f{\"u}r die {\"U}berwachung von Zellkulturfermentationen pr{\"a}sentiert. Zur Messung der Elektrolytleitf{\"a}higkeit wurde das Layout von Interdigitalelektroden angepasst, um in vergleichsweise gut leitenden Elektrolyten zu messen. Durch Quervernetzung von Glucose-Oxidase mit Glutaraldehyd und Immobilisierung auf einer Platinelektrode wurde ein amperometrischer Glucosesensor mit einem linearen Messbereich von bis zu 2 mM und einer Sensitivit{\"a}t von 168 nA/mM realisiert.},
  language  = {de}
}
@article{BoernerFunkeHendricketal.2010,
  author    = {B{\"o}rner, Sebastian and Funke, Harald and Hendrick, P. and Recker, E.},
  title     = {Control system modifications for a hydrogen fuelled gas-turbine},
  series = {Proceedings of ISROMAC 13},
  journal   = {Proceedings of ISROMAC 13},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-617-38848-4},
  pages     = {665 -- 670},
  year      = {2010},
  language  = {en}
}
@techreport{Buedenbender2010,
  type      = {Working Paper},
  author    = {B{\"u}denbender, Martin},
  title     = {Entflechtung von Stromnetzen in Deutschland und Europa im Rahmen des dritten EU-Legislativpakets - Eine Problemdarstellung},
  series = {Arbeitspapiere des Instituts f{\"u}r Genossenschaftswesen der Westf{\"a}lischen Wilhelms-Universit{\"a}t M{\"u}nster, Nr. 91},
  journal   = {Arbeitspapiere des Instituts f{\"u}r Genossenschaftswesen der Westf{\"a}lischen Wilhelms-Universit{\"a}t M{\"u}nster, Nr. 91},
  pages     = {35},
  year      = {2010},
  language  = {de}
}
@article{ChristenBarteltKowalski2010,
  author    = {Christen, Marc and Bartelt, Perry and Kowalski, Julia},
  title     = {Back calculation of the In den Arelen avalanche with RAMMS: Interpretation of model results},
  series = {Annals of Glaciology},
  volume    = {51},
  journal   = {Annals of Glaciology},
  number    = {54},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  isbn      = {1727-5644},
  doi       = {10.3189/172756410791386553},
  pages     = {161 -- 168},
  year      = {2010},
  abstract  = {Two- and three-dimensional avalanche dynamics models are being increasingly used in hazard-mitigation studies. These models can provide improved and more accurate results for hazard mapping than the simple one-dimensional models presently used in practice. However, two- and three-dimensional models generate an extensive amount of output data, making the interpretation of simulation results more difficult. To perform a simulation in three-dimensional terrain, numerical models require a digital elevation model, specification of avalanche release areas (spatial extent and volume), selection of solution methods, finding an adequate calculation resolution and, finally, the choice of friction parameters. In this paper, the importance and difficulty of correctly setting up and analysing the results of a numerical avalanche dynamics simulation is discussed. We apply the two-dimensional simulation program RAMMS to the 1968 extreme avalanche event In den Arelen. We show the effect of model input variations on simulation results and the dangers and complexities in their interpretation.},
  language  = {en}
}
@article{ChristenKowalskiBartelt2010,
  author    = {Christen, Marc and Kowalski, Julia and Bartelt, Perry},
  title     = {RAMMS: Numerical simulation of dense snow avalanches in three-dimensional terrain},
  series = {Cold Regions Science and Technology},
  volume    = {63},
  journal   = {Cold Regions Science and Technology},
  number    = {1-2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7441},
  doi       = {10.1016/j.coldregions.2010.04.005},
  pages     = {1 -- 14},
  year      = {2010},
  abstract  = {Numerical avalanche dynamics models have become an essential part of snow engineering. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, their application poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to construct hazard scenarios which involve the careful specification of initial conditions (release zone location and dimensions) and definition of appropriate friction parameters. The interpretation of simulation results requires an understanding of the numerical solution schemes and easy to use visualization tools. We discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with accurate second-order numerical solution schemes. The model allows the specification of multiple release zones in three-dimensional terrain. Snow cover entrainment is considered. Furthermore, two different flow rheologies can be applied: the standard Voellmy-Salm (VS) approach or a random kinetic energy (RKE) model, which accounts for the random motion and inelastic interaction between snow granules. We present the governing differential equations, highlight some of the input and output features of RAMMS and then apply the models with entrainment to simulate two well-documented avalanche events recorded at the Vall{\´e}e de la Sionne test site.},
  language  = {en}
}
@article{ClaessenGrefenMangetal.2010,
  author    = {Claessen, O. and Grefen, Dana and Mang, Thomas and Dikland, H. G. and Dikland, H. G. and Duin, M. van},
  title     = {Helle Fensterprofilmaterialien : Alterungsverhalten auf Basis von peroxidisch vernetztem EPDM},
  series = {Kautschuk, Gummi, Kunststoffe : KGK},
  volume    = {63},
  journal   = {Kautschuk, Gummi, Kunststoffe : KGK},
  number    = {9},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {0948-3276},
  pages     = {350 -- 360},
  year      = {2010},
  language  = {de}
}
@article{CzarneckiWinkelmannSpiliopoulou2010,
  author    = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra},
  title     = {Services in electronic telecommunication markets: a framework for planning the virtualization of processes},
  series = {Electronic Markets},
  volume    = {20},
  journal   = {Electronic Markets},
  number    = {3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1422-8890},
  doi       = {10.1007/s12525-010-0045-8},
  pages     = {197 -- 207},
  year      = {2010},
  abstract  = {The potential of electronic markets in enabling innovative product bundles through flexible and sustainable partnerships is not yet fully exploited in the telecommunication industry. One reason is that bundling requires seamless de-assembling and re-assembling of business processes, whilst processes in telecommunication companies are often product-dependent and hard to virtualize. We propose a framework for the planning of the virtualization of processes, intended to assist the decision maker in prioritizing the processes to be virtualized: (a) we transfer the virtualization pre-requisites stated by the Process Virtualization Theory in the context of customer-oriented processes in the telecommunication industry and assess their importance in this context, (b) we derive IT-oriented requirements for the removal of virtualization barriers and highlight their demand on changes at different levels of the organization. We present a first evaluation of our approach in a case study and report on lessons learned and further steps to be performed.},
  language  = {en}
}
@incollection{Dachwald2010,
  author    = {Dachwald, Bernd},
  title     = {Solar sail dynamics and control},
  series = {Encyclopedia of Aerospace Engineering},
  booktitle = {Encyclopedia of Aerospace Engineering},
  publisher = {Wiley},
  address   = {Hoboken},
  doi       = {10.1002/9780470686652.eae292},
  year      = {2010},
  abstract  = {Solar sails are large and lightweight reflective structures that are propelled by solar radiation pressure. This chapter covers their orbital and attitude dynamics and control. First, the advantages and limitations of solar sails are discussed and their history and development status is outlined. Because the dynamics of solar sails is governed by the (thermo-)optical properties of the sail film, the basic solar radiation pressure force models have to be described and compared before parameters to measure solar sail performance can be defined. The next part covers the orbital dynamics of solar sails for heliocentric motion, planetocentric motion, and motion at Lagrangian equilibrium points. Afterwards, some advanced solar radiation pressure force models are described, which allow to quantify the thrust force on solar sails of arbitrary shape, the effects of temperature, of light incidence angle, of surface roughness, and the effects of optical degradation of the sail film in the space environment. The orbital motion of a solar sail is strongly coupled to its rotational motion, so that the attitude control of these soft and flexible structures is very challenging, especially for planetocentric orbits that require fast attitude maneuvers. Finally, some potential attitude control methods are sketched and selection criteria are given.},
  language  = {en}
}
@inproceedings{DammRitzStrauch2010,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Benutzerzentrierte Anforderungsanalyse f{\"u}r die Produktlinien-Entwicklung mobiler Unternehmenssoftware},
  series = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  booktitle = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  editor    = {Klink, Stefan},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-266-6},
  pages     = {117 -- 130},
  year      = {2010},
  language  = {de}
}
@article{DegeringEggertPulsetal.2010,
  author    = {Degering, Christian and Eggert, Thorsten and Puls, Michael and Bongaerts, Johannes and Evers, Stefan and Maurer, Karl-Heinz and Jaeger, Karl-Erich},
  title     = {Optimization of protease secretion in Bacillus subtilis and Bacillus licheniformis by screening of homologous and herologous signal peptides},
  series = {Applied and environmental microbiology},
  volume    = {76},
  journal   = {Applied and environmental microbiology},
  number    = {19},
  publisher = {American Society for Microbiology},
  address   = {Washington, DC},
  issn      = {1098-5336 (E-Journal); 0003-6919 (Print); 0099-2240 (Print)},
  doi       = {10.1128/AEM.01146-10},
  pages     = {6370 -- 6378},
  year      = {2010},
  abstract  = {Bacillus subtilis and Bacillus licheniformis are widely used for the large-scale industrial production of proteins. These strains can efficiently secrete proteins into the culture medium using the general secretion (Sec) pathway. A characteristic feature of all secreted proteins is their N-terminal signal peptides, which are recognized by the secretion machinery. Here, we have studied the production of an industrially important secreted protease, namely, subtilisin BPN′ from Bacillus amyloliquefaciens. One hundred seventy-three signal peptides originating from B. subtilis and 220 signal peptides from the B. licheniformis type strain were fused to this secretion target and expressed in B. subtilis, and the resulting library was analyzed by high-throughput screening for extracellular proteolytic activity. We have identified a number of signal peptides originating from both organisms which produced significantly increased yield of the secreted protease. Interestingly, we observed that levels of extracellular protease were improved not only in B. subtilis, which was used as the screening host, but also in two different B. licheniformis strains. To date, it is impossible to predict which signal peptide will result in better secretion and thus an improved yield of a given extracellular target protein. Our data show that screening a library consisting of homologous and heterologous signal peptides fused to a target protein can identify more-effective signal peptides, resulting in improved protein export not only in the original screening host but also in different production strains.},
  language  = {en}
}
@inproceedings{DiIorioNobileStapenhorst2010,
  author    = {Di Iorio, Marina and Nobile, Maria Luna and Stapenhorst, Carolin},
  title     = {Martinella},
  series = {Edifici alti e paesaggio},
  booktitle = {Edifici alti e paesaggio},
  editor    = {Bovati, Marco and Di Franco, Andrea},
  publisher = {Maggioli},
  address   = {Santarcangelo di Romagna},
  isbn      = {978-88-387-4434-1},
  pages     = {191 -- 202},
  year      = {2010},
  language  = {it}
}
@misc{DieringerRenzLindeletal.2010,
  author    = {Dieringer, Matthias A. and Renz, Wolfgang and Lindel, Tomasz Dawid and Seifert, Frank and Frauenrath, Tobias and Waiczies, Helmar and von Knobelsdorff-Brenkhoff, Florian and Santoro, Davide and Hoffmann, Werner and Ittermann, Bernd and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {4CH TX/RX Surface Coil for 7T: Design, Optimization and Application for Cardiac Function Imaging},
  series = {2010 ISMRM-ESMRMB joint annual meeting},
  journal   = {2010 ISMRM-ESMRMB joint annual meeting},
  issn      = {1545-4428},
  year      = {2010},
  abstract  = {Practical impediments of ultra high field cardiovascular MR (CVMR) can be catalogued in exacerbated magnetic field and radio frequency (RF) inhomogeneities, susceptibility and off-resonance effects, conductive and dielectric effects in tissue, and RF power deposition constraints, which all bear the potential to spoil the benefit of CVMR at 7T. Therefore, a four element cardiac transceive surface coil array was developed. Cardiac imaging provided clinically acceptable signal homogeneity with an excellent blood myocardium contrast. Subtle anatomic structures, such as pericardium, mitral and tricuspid valves and their apparatus, papillary muscles, and trabecles were accurately delineated.},
  language  = {en}
}
@misc{Digel2010,
  author    = {Digel, Ilya},
  title     = {In-situ biological decontamination of an ice melting probe},
  year      = {2010},
  language  = {en}
}
@article{DobbertinEilmannBleuleretal.2010,
  author    = {Dobbertin, Matthias and Eilmann, Britta and Bleuler, Peter and Giuggiola, Arnaud and Graf Pannatier, Elisabeth and Landolt, Werner and Schleppi, Patrick and Rigling, Andreas},
  title     = {Effect of irrigation on needle morphology, shoot and stem growth in a drought-exposed Pinus sylvestris forest},
  series = {Tree Physiology},
  volume    = {30},
  journal   = {Tree Physiology},
  number    = {3},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1758-4469 (Online)},
  doi       = {10.1093/treephys/tpp123},
  pages     = {346 -- 360},
  year      = {2010},
  abstract  = {In Valais, Switzerland, Scots pines (Pinus sylvestris L.) are declining, mainly following drought. To assess the impact of drought on tree growth and survival, an irrigation experiment was initiated in 2003 in a mature pine forest, approximately doubling the annual precipitation. Tree crown transparency (lack of foliage) and leaf area index (LAI) were annually assessed. Seven irrigated and six control trees were felled in 2006, and needles, stem discs and branches were taken for growth analysis. Irrigation in 2004 and 2005, both with below-average precipitation, increased needle size, area and mass, stem growth and, with a 1-year delay, shoot length. This led to a relative decrease in tree crown transparency (-14\%) and to an increase in stand LAI (+20\%). Irrigation increased needle length by 70\%, shoot length by 100\% and ring width by 120\%, regardless of crown transparency. Crown transparency correlated positively with mean needle size, shoot length and ring width and negatively with specific leaf area. Trees with high crown transparency (low growth, short needles) experienced similar increases in needle mass and growth with irrigation than trees with low transparency (high growth, long needles), indicating that seemingly declining trees were able to 'recover' when water supply became sufficient. A simple drought index before and during the irrigation explained most of the variation found in the parameters for both irrigated and control trees.},
  language  = {en}
}
@book{EckeyKurth2010,
  author    = {Eckey, Ulrich and Kurth, Fabian},
  title     = {Hamburg 2010 : Hafencity, Jungfernstieg, IBA 2013, Chilehaus, Speicherstadt, BRT Architekten.},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {129 S. : zahlr. Ill.},
  year      = {2010},
  language  = {de}
}
@article{EgliAyerPeteretal.2010,
  author    = {Egli, Simon and Ayer, Fran{\c{c}}ois and Peter, Martina and Eilmann, Britta and Rigling, Andreas},
  title     = {Is forest mushroom productivity driven by tree growth? Results from a thinning experiment},
  series = {Annals of Forest Science},
  volume    = {67},
  journal   = {Annals of Forest Science},
  number    = {5},
  publisher = {Springer},
  address   = {Paris},
  issn      = {1286-4560 (Print)},
  doi       = {10.1051/forest/2010011},
  pages     = {509},
  year      = {2010},
  abstract  = {• Most of the edible forest mushrooms are mycorrhizal and depend on carbohydrates produced by the associated trees. Fruiting patterns of these fungi are not yet fully understood since climatic factors alone do not completely explain mushroom occurrence. • The objective of this study was to retrospectively find out if changing tree growth following an increment thinning has influenced the diversity patterns and productivity of associated forest mushrooms in the fungus reserve La Chan{\´e}az, Switzerland. • The results reveal a clear temporal relationship between the thinning, the growth reaction of trees and the reaction of the fungal community, especially for the ectomycorrhizal species. The tree-ring width of the formerly suppressed beech trees and the fruit body number increased after thinning, leading to a significantly positive correlation between fruit body numbers and tree-ring width. • Fruit body production was influenced by previous annual tree growth, the best accordance was found between fruit body production and the tree-ring width two years previously. • The results support the hypothesis that ectomycorrhizal fruit body production must be linked with the growth of the associated host trees. Moreover, the findings indicate the importance of including mycorrhizal fungi as important players when discussing a tree as a carbon source or sink.},
  language  = {en}
}
@article{EilmannBuchmannSiegwolfetal.2010,
  author    = {Eilmann, Britta and Buchmann, Nina and Siegwolf, Rolf and Saurer, Matthias and Cherubini, Paolo and Rigling, Andreas},
  title     = {Fast response of Scots pine to improved water availability reflected in tree-ring width and δ13C},
  series = {Plant, Cell and Environment},
  volume    = {33},
  journal   = {Plant, Cell and Environment},
  number    = {8},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1365-3040 (Online)},
  doi       = {10.1111/j.1365-3040.2010.02153.x},
  pages     = {1351 -- 1360},
  year      = {2010},
  abstract  = {Drought-induced forest decline, like the Scots pine mortality in inner-Alpine valleys, will gain in importance as the frequency and severity of drought events are expected to increase. To understand how chronic drought affects tree growth and tree-ring δ13C values, we studied mature Scots pine in an irrigation experiment in an inner-Alpine valley. Tree growth and isotope analyses were carried out at the annual and seasonal scale. At the seasonal scale, maximum δ13C values were measured after the hottest and driest period of the year, and were associated with decreasing growth rates. Inter-annual δ13C values in early- and latewood showed a strong correlation with annual climatic conditions and an immediate decrease as a response to irrigation. This indicates a tight coupling between wood formation and the freshly produced assimilates for trees exposed to chronic drought. This rapid appearance of the isotopic signal is a strong indication for an immediate and direct transfer of newly synthesized assimilates for biomass production. The fast appearance and the distinct isotopic signal suggest a low availability of old stored carbohydrates. If this was a sign for C-storage depletion, an increasing mortality could be expected when stressors increase the need for carbohydrate for defence, repair or regeneration.},
  language  = {en}
}