@article{KahmannRauschPluemeretal.2022, author = {Kahmann, Stephanie L. and Rausch, Valentin and Pl{\"u}mer, Jonathan and M{\"u}ller, Lars P. and Pieper, Martin and Wegmann, Kilian}, title = {The automized fracture edge detection and generation of three-dimensional fracture probability heat maps}, series = {Medical Engineering \& Physics}, volume = {2022}, journal = {Medical Engineering \& Physics}, number = {110}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1350-4533}, pages = {7 Seiten}, year = {2022}, abstract = {With proven impact of statistical fracture analysis on fracture classifications, it is desirable to minimize the manual work and to maximize repeatability of this approach. We address this with an algorithm that reduces the manual effort to segmentation, fragment identification and reduction. The fracture edge detection and heat map generation are performed automatically. With the same input, the algorithm always delivers the same output. The tool transforms one intact template consecutively onto each fractured specimen by linear least square optimization, detects the fragment edges in the template and then superimposes them to generate a fracture probability heat map. We hypothesized that the algorithm runs faster than the manual evaluation and with low (< 5 mm) deviation. We tested the hypothesis in 10 fractured proximal humeri and found that it performs with good accuracy (2.5 mm ± 2.4 mm averaged Euclidean distance) and speed (23 times faster). When applied to a distal humerus, a tibia plateau, and a scaphoid fracture, the run times were low (1-2 min), and the detected edges correct by visual judgement. In the geometrically complex acetabulum, at a run time of 78 min some outliers were considered acceptable. An automatically generated fracture probability heat map based on 50 proximal humerus fractures matches the areas of high risk of fracture reported in medical literature. Such automation of the fracture analysis method is advantageous and could be extended to reduce the manual effort even further.}, language = {en} } @article{BiewendtBlaschkeBoehnert2020, author = {Biewendt, Marcel and Blaschke, Florian and B{\"o}hnert, Arno}, title = {An evaluation of corporate sustainability in context of the Jevons paradox}, series = {SocioEconomic Challenges}, volume = {4}, journal = {SocioEconomic Challenges}, number = {3}, publisher = {ARMG Publishing}, address = {Sumy}, issn = {2520-6214}, doi = {10.21272/sec.4(3).46-65.2020}, pages = {46 -- 65}, year = {2020}, abstract = {The successful implementation and continuous development of sustainable corporate-level solutions is a challenge. These are endeavours in which social, environmental, and financial aspects must be weighed against each other. They can prove difficult to handle and, in some cases, almost unrealistic. Concepts such as green controlling, IT, and manufacturing look promising and are constantly evolving. This paper aims to achieve a better understanding of the field of corporate sustainability (CS). It will evaluate the hypothesis by which Corporate Sustainability thrives, via being efficient, increasing the performance, and raising the value of the input of the enterprises to the resources used. In fact, Corporate Sustainability on the surface could seem to contradict the idea, which supports the understanding that it encourages the reduction of the heavy reliance on the use of natural resources, the overall environmental impact, and above all, their protection. To understand how the contradictory notion of CS came about, in this part of the paper, the emphasis is placed on providing useful insight to this regard. The first part of this paper summarizes various definitions, organizational theories, and measures used for CS and its derivatives like green controlling, IT, and manufacturing. Second, a case study is given that combines the aforementioned sustainability models. In addition to evaluating the hypothesis, the overarching objective of this paper is to demonstrate the use of green controlling, IT, and manufacturing in the corporate sector. Furthermore, this paper outlines the current challenges and possible directions for CS in the future.}, language = {en} } @article{EngelmannSimsekShalabyetal.2024, author = {Engelmann, Ulrich M. and Simsek, Beril and Shalaby, Ahmed and Krause, Hans-Joachim}, title = {Key contributors to signal generation in frequency mixing magnetic detection (FMMD): an in silico study}, series = {Sensors}, volume = {24}, journal = {Sensors}, number = {6}, publisher = {MDPI}, address = {Basel}, issn = {1424-8220}, doi = {10.3390/s24061945}, pages = {Artikel 1945}, year = {2024}, abstract = {Frequency mixing magnetic detection (FMMD) is a sensitive and selective technique to detect magnetic nanoparticles (MNPs) serving as probes for binding biological targets. Its principle relies on the nonlinear magnetic relaxation dynamics of a particle ensemble interacting with a dual frequency external magnetic field. In order to increase its sensitivity, lower its limit of detection and overall improve its applicability in biosensing, matching combinations of external field parameters and internal particle properties are being sought to advance FMMD. In this study, we systematically probe the aforementioned interaction with coupled N{\´e}el-Brownian dynamic relaxation simulations to examine how key MNP properties as well as applied field parameters affect the frequency mixing signal generation. It is found that the core size of MNPs dominates their nonlinear magnetic response, with the strongest contributions from the largest particles. The drive field amplitude dominates the shape of the field-dependent response, whereas effective anisotropy and hydrodynamic size of the particles only weakly influence the signal generation in FMMD. For tailoring the MNP properties and parameters of the setup towards optimal FMMD signal generation, our findings suggest choosing large particles of core sizes dc > 25 nm nm with narrow size distributions (σ < 0.1) to minimize the required drive field amplitude. This allows potential improvements of FMMD as a stand-alone application, as well as advances in magnetic particle imaging, hyperthermia and magnetic immunoassays.}, language = {en} } @article{HorbachStaat2018, author = {Horbach, Andreas and Staat, Manfred}, title = {Optical strain measurement for the modeling of surgical meshes and their porosity}, series = {Current Directions in Biomedical Engineering}, volume = {Band 4}, journal = {Current Directions in Biomedical Engineering}, number = {1}, publisher = {De Gruyter}, address = {Berlin}, issn = {2364-5504}, doi = {10.1515/cdbme-2018-0045}, pages = {181 -- 184}, year = {2018}, abstract = {The porosity of surgical meshes makes them flexible for large elastic deformation and establishes the healing conditions of good tissue in growth. The biomechanic modeling of orthotropic and compressible materials requires new materials models and simulstaneoaus fit of deformation in the load direction as well as trannsversely to to load. This nonlinear modeling can be achieved by an optical deformation measurement. At the same time the full field deformation measurement allows the dermination of the change of porosity with deformation. Also the socalled effective porosity, which has been defined to asses the tisssue interatcion with the mesh implants, can be determined from the global deformation of the surgical meshes.}, language = {en} } @article{GrajewskiKleefeld2023, author = {Grajewski, Matthias and Kleefeld, Andreas}, title = {Detecting and approximating decision boundaries in low-dimensional spaces}, series = {Numerical Algorithms}, volume = {93}, journal = {Numerical Algorithms}, number = {4}, publisher = {Springer Science+Business Media}, address = {Dordrecht}, issn = {1572-9265}, pages = {35 Seiten}, year = {2023}, abstract = {A method for detecting and approximating fault lines or surfaces, respectively, or decision curves in two and three dimensions with guaranteed accuracy is presented. Reformulated as a classification problem, our method starts from a set of scattered points along with the corresponding classification algorithm to construct a representation of a decision curve by points with prescribed maximal distance to the true decision curve. Hereby, our algorithm ensures that the representing point set covers the decision curve in its entire extent and features local refinement based on the geometric properties of the decision curve. We demonstrate applications of our method to problems related to the detection of faults, to multi-criteria decision aid and, in combination with Kirsch's factorization method, to solving an inverse acoustic scattering problem. In all applications we considered in this work, our method requires significantly less pointwise classifications than previously employed algorithms.}, language = {en} } @article{BaringhausGaigall2017, author = {Baringhaus, Ludwig and Gaigall, Daniel}, title = {Hotelling's T² tests in paired and independent survey samples: An efficiency comparison}, series = {Journal of Multivariate Analysis}, volume = {2017}, journal = {Journal of Multivariate Analysis}, number = {154}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0047-259X}, doi = {10.1016/j.jmva.2016.11.004}, pages = {177 -- 198}, year = {2017}, abstract = {Hotelling's T² tests in paired and independent survey samples are compared using the traditional asymptotic efficiency concepts of Hodges-Lehmann, Bahadur and Pitman, as well as through criteria based on the volumes of corresponding confidence regions. Conditions characterizing the superiority of a procedure are given in terms of population canonical correlation type coefficients. Statistical tests for checking these conditions are developed. Test statistics based on the eigenvalues of a symmetrized sample cross-covariance matrix are suggested, as well as test statistics based on sample canonical correlation type coefficients.}, language = {en} } @article{MeyerHaenelBeehetal.2020, author = {Meyer, S. and H{\"a}nel, Matthias and Beeh, B. and Dittmann-Gabriel, S{\"o}ren and Dluhosch, R. and May, Martin and Herrmann, Ulf}, title = {Multifunktionaler thermischer Stromspeicher f{\"u}r die Strom- und W{\"a}rmeversorgung der Industrie von morgen}, series = {ETG Journal / Energietechnische Gesellschaft im VDE (ETG)}, volume = {2020}, journal = {ETG Journal / Energietechnische Gesellschaft im VDE (ETG)}, number = {1}, issn = {2625-9907}, pages = {6 -- 9}, year = {2020}, language = {de} } @article{BerndtGattnerZahn1975, author = {Berndt, Heinz and Gattner, Hans-Gregor and Zahn, Helmut}, title = {Semisynthetisches Des-A1-glycin-Schafinsulin}, series = {Biological Chemistry}, volume = {356}, journal = {Biological Chemistry}, number = {2}, publisher = {De Gruyter}, address = {Berlin}, issn = {1437-4315}, doi = {10.1515/bchm2.1975.356.2.1455}, pages = {1469 -- 1472}, year = {1975}, language = {de} } @article{WangAnikFrohberg1987, author = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.}, title = {Thermodynamics of oxygen in the lead-antimony system at 1173 K}, series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik}, volume = {40}, journal = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik}, number = {6}, issn = {0044-2658}, pages = {316 -- 319}, year = {1987}, language = {en} } @article{HerrmannKearney2002, author = {Herrmann, Ulf and Kearney, David W.}, title = {Survey of Thermal Energy Storage for Parabolic Trough Power Plants}, series = {Journal of Solar Energy Engineering}, volume = {124}, journal = {Journal of Solar Energy Engineering}, number = {2}, issn = {1528-8986 (Online)}, doi = {10.1115/1.1467601}, pages = {145 -- 152}, year = {2002}, language = {en} } @article{LevesqueSiegwolfEilmannetal.2014, author = {L{\´e}vesque, Mathieu and Siegwolf, Rolf and Eilmann, Britta and Saurer, Matthias and Rigling, Andreas}, title = {Increased water-use efficiency does not lead to enhanced tree growth under xeric and mesic conditions}, series = {New Phytologist}, volume = {203}, journal = {New Phytologist}, number = {1}, publisher = {Wiley-Blackwell}, address = {Oxford}, issn = {1469-8137 (Online)}, doi = {10.1111/nph.12772}, pages = {94 -- 109}, year = {2014}, language = {en} } @article{KearneyKellyHerrmannetal.2002, author = {Kearney, David W. and Kelly, Bruce and Herrmann, Ulf and Cable, R. and Pacheco, J. and Mahoney, R. and Price, Henry and Blake, D. and Nava, P. and Potrovitza, N.}, title = {Engineering Aspects of a Molten Salt Heat Transfer Fluid in a Trough Solar Field}, series = {Energy : the international journal}, volume = {29}, journal = {Energy : the international journal}, number = {5-6 (Special Issue SolarPaces)}, issn = {0360-5442}, doi = {10.1016/S0360-5442(03)00191-9}, pages = {861 -- 870}, year = {2002}, language = {en} } @article{FrohbergAnik1985, author = {Frohberg, Martin G. and Anik, Sabri}, title = {Thermodynamic relations between component activities and gas solubilities in binary metallic systems}, series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, volume = {89}, journal = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie}, number = {2}, issn = {0940-483X}, pages = {130 -- 134}, year = {1985}, language = {en} } @article{HafnerDemetzWeickertetal.2014, author = {Hafner, David and Demetz, Oliver and Weickert, Joachim and Reißel, Martin}, title = {Mathematical Foundations and Generalisations of the Census Transform for Robust Optic Flow Computation}, series = {Journal of Mathematical Imaging and Vision}, journal = {Journal of Mathematical Imaging and Vision}, publisher = {Springer}, address = {New York}, issn = {1573-7683 (Online)}, doi = {10.1007/s10851-014-0529-9}, year = {2014}, language = {en} } @article{Anik1978, author = {Anik, Sabri}, title = {Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern}, series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin}, volume = {70}, journal = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin}, number = {39}, publisher = {Medtrix Group}, address = {Basel}, issn = {0040-148X}, pages = {37 -- 41}, year = {1978}, language = {de} } @article{AnikAnik1991, author = {Anik, Sabri and Anik, Salahaddin}, title = {Stand der Schweißtechnik in der T{\"u}rkei}, series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, volume = {43}, journal = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren}, number = {3}, issn = {0036-7184}, pages = {142 -- 145}, year = {1991}, language = {de} } @article{Helmig2015, author = {Helmig, Ilka}, title = {A few (hi)stories about french illustration}, series = {Slanted}, journal = {Slanted}, number = {25 (Paris)}, publisher = {Slanted Publishers}, address = {Karlsruhe}, issn = {1867-6510}, pages = {210 -- 217}, year = {2015}, language = {en} } @article{GielenWolfBerndtetal.1979, author = {Gielen, Hans-G{\"u}nther and Wolf, G{\"u}nter and Berndt, Heinz and Zahn, Helmut}, title = {Synthese der Fragmente A1-8, A9-15 und A16-21 der Schafinsulin-A-Kette unter Verwendung des S-tert-Butylmercaptorestes als Thiolschutzgruppe}, series = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie}, volume = {360}, journal = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie}, number = {2}, issn = {1437-4315}, doi = {10.1515/bchm2.1979.360.2.1535}, pages = {1535 -- 1548}, year = {1979}, language = {de} } @article{WolfBerndtBrandenburg1979, author = {Wolf, Wilhelm and Berndt, Heinz and Brandenburg, Dietrich}, title = {Synthese von Fragmenten einer [LysA13] Rinder-Insulin-A-Kette unter Verwendung des S-tert-Butylmercaptorestes als Thiolschutz}, series = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie}, volume = {360}, journal = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie}, number = {2}, issn = {1437-4315}, doi = {10.1515/bchm2.1979.360.2.1549}, pages = {1549 -- 1558}, year = {1979}, language = {de} } @article{WilhelmBerndtBrandenburg1979, author = {Wilhelm, Wolff and Berndt, Heinz and Brandenburg, Dietrich}, title = {Zur Synthese der H{\"u}hnerinsulin-A-Kette, I : Darstellung der Fragmente A1-8, A9-15, A1-7 und A8-15}, series = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie}, volume = {360}, journal = {Hoppe-Seyler's Zeitschrift f{\"u}r physiologische Chemie}, number = {2}, issn = {1437-4315}, doi = {10.1515/bchm2.1979.360.2.1559}, pages = {1559 -- 1568}, year = {1979}, language = {de} }