@article{AchtsnichtToedterNiehuesetal.2019,
  author    = {Achtsnicht, Stefan and T{\"o}dter, Julia and Niehues, Julia and Tel{\"o}ken, Matthias and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim and Schr{\"o}per, Florian},
  title     = {3D printed modular immunofiltration columns for frequency mixing-based multiplex magnetic immunodetection},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19010148},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {For performing point-of-care molecular diagnostics, magnetic immunoassays constitute a promising alternative to established enzyme-linked immunosorbent assays (ELISA) because they are fast, robust and sensitive. Simultaneous detection of multiple biomolecular targets from one body fluid sample is desired. The aim of this work is to show that multiplex magnetic immunodetection based on magnetic frequency mixing by means of modular immunofiltration columns prepared for different targets is feasible. By calculations of the magnetic response signal, the required spacing between the modules was determined. Immunofiltration columns were manufactured by 3D printing and antibody immobilization was performed in a batch approach. It was shown experimentally that two different target molecules in a sample solution could be individually detected in a single assaying step with magnetic measurements of the corresponding immobilization filters. The arrangement order of the filters and of a negative control did not influence the results. Thus, a simple and reliable approach to multi-target magnetic immunodetection was demonstrated.},
  language  = {en}
}
@article{HillenFischerPaulus2007,
  author    = {Hillen, Walter and Fischer, Felix and Paulus, Dietrich},
  title     = {3D Presentation States: Parametrisierung und Speicherung der 3D-Darstellung von segmentierten medizinischen Volumendaten / Fischer, Felix ; Hillen, Walter ; Paulus, Dietrich},
  series = {Biomedizinische Technik. 52 (2007), H. Erg{\"a}nzungsband},
  journal   = {Biomedizinische Technik. 52 (2007), H. Erg{\"a}nzungsband},
  isbn      = {0939-4990},
  pages     = {1 -- 2},
  year      = {2007},
  language  = {de}
}
@article{KallweitKaminskyRossietal.2005,
  author    = {Kallweit, Stephan and Kaminsky, R. and Rossi, M. and Morbiducci, U.},
  title     = {3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.},
  series = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  journal   = {The International Journal of Artificial Organs. 28 (2005), H. 9},
  isbn      = {1724-6040},
  pages     = {868},
  year      = {2005},
  language  = {en}
}
@inproceedings{WalterElsenMuelleretal.1999,
  author    = {Walter, Peter and Elsen, Ingo and M{\"u}ller, Holger and Kraiss, Karl-Friedrich},
  title     = {3D object recognition with a specialized mixtures of experts architecture},
  series = {IJCNN'99. International Joint Conference on Neural Networks. Proceedings},
  booktitle = {IJCNN'99. International Joint Conference on Neural Networks. Proceedings},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {0-7803-5529-6},
  issn      = {1098-7576},
  doi       = {10.1109/IJCNN.1999.836243},
  pages     = {3563 -- 3568},
  year      = {1999},
  abstract  = {Aim of the AXON2 project (Adaptive Expert System for Object Recogniton using Neuml Networks) is the development of an object recognition system (ORS) capable of recognizing isolated 3d objects from arbitrary views. Commonly, classification is based on a single feature extracted from the original image. Here we present an architecture adapted from the Mixtures of Eaqerts algorithm which uses multiple neuml networks to integmte different features. During tmining each neural network specializes in a subset of objects or object views appropriate to the properties of the corresponding feature space. In recognition mode the system dynamically chooses the most relevant features and combines them with maximum eficiency. The remaining less relevant features arz not computed and do therefore not decelerate the-recognition process. Thus, the algorithm is well suited for ml-time applications.},
  language  = {en}
}
@inproceedings{FrauenrathGoemmelButenwegetal.2010,
  author    = {Frauenrath, Tobias and G{\"o}mmel, Andreas and Butenweg, Christoph and Otten, Mario and Niendorf, Thoralf},
  title     = {3D mapping of vocal fold geometry during articulatory maneuvers using ultrashort echo time imaging at 3.0 T},
  series = {ISMRM-ESMRMB joint annual meeting 2010, Band 4},
  booktitle = {ISMRM-ESMRMB joint annual meeting 2010, Band 4},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {International Society of Magnetic Resonance in Medicine},
  isbn      = {978-1-617-82008-3},
  pages     = {3087},
  year      = {2010},
  language  = {en}
}
@article{KaminskyKallweitWeberetal.2006,
  author    = {Kaminsky, Radoslav and Kallweit, Stephan and Weber, Hans-Joachim and Simons, Antoine and Kramm, K. and Jazwik, K. and Moll, J. and Verdonck, P.},
  title     = {3D high speed piv assessment of a new aortic heart valve prototype},
  series = {Journal of biomechanics. 39 (2006), H. Supplement 1},
  journal   = {Journal of biomechanics. 39 (2006), H. Supplement 1},
  publisher = {-},
  isbn      = {0021-9290},
  pages     = {S304 -- S305},
  year      = {2006},
  language  = {en}
}
@inproceedings{FunkeBeckmannKeinzetal.2021,
  author    = {Funke, Harald and Beckmann, Nils and Keinz, Jan and Horikawa, Atsushi},
  title     = {30 years of dry low NOx micromix combustor research for hydrogen-rich fuels: an overview of past and present activities},
  series = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 4B: Combustion, Fuels, and Emissions},
  booktitle = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 4B: Combustion, Fuels, and Emissions},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {978-0-7918-8413-3},
  doi       = {10.1115/GT2020-16328},
  pages     = {14 Seiten},
  year      = {2021},
  abstract  = {The paper presents an overview of the past and present of low-emission combustor research with hydrogen-rich fuels at Aachen University of Applied Sciences. In 1990, AcUAS started developing the Dry-Low-NOx Micromix combustion technology. Micromix reduces NOx emissions using jet-in-crossflow mixing of multiple miniaturized fuel jets and combustor air with an inherent safety against flashback. At first, pure hydrogen as fuel was investigated with lab-scale applications. Later, Micromix prototypes were developed for the use in an industrial gas turbine Honeywell/Garrett GTCP-36-300, proving low NOx characteristics during real gas turbine operation, accompanied by the successful definition of safety laws and control system modifications. Further, the Micromix was optimized for the use in annular and can combustors as well as for fuel-flexibility with hydrogen-methane-mixtures and hydrogen-rich syngas qualities by means of extensive experimental and numerical simulations. In 2020, the latest Micromix application will be demonstrated in a commercial 2 MW-class gas turbine can-combustor with full-scale engine operation. The paper discusses the advances in Micromix research over the last three decades.},
  language  = {en}
}
@techreport{HoffmannUllrich2024,
  type      = {Working Paper},
  author    = {Hoffmann, Sarah and Ullrich, Anna Valentine},
  title     = {30 Minuten FDM f{\"u}r HAW. Ein Informationsformat f{\"u}r Forschende an HAW in NRW},
  doi       = {10.5281/zenodo.12569282},
  pages     = {1 Seite},
  year      = {2024},
  abstract  = {Wie kann man das Thema Forschungsdatenmanagement (FDM) konkret und anwendbar f{\"u}r Forschende gestalten, die bisher noch wenig Kontakt damit hatten? Auf diese Frage gibt das Konzept „30 Minuten FDM f{\"u}r HAW. Ein Informationsformat f{\"u}r Forschende an HAW in NRW" eine Antwort. Es entstand als Projektarbeit im Zertifikatskurs Forschungsdatenmanagement 2023/24},
  language  = {de}
}
@misc{OPUS4-10859,
  title     = {3. Ordnung zur {\"A}nderung der Studien- und Pr{\"u}fungsordnung f{\"u}r den dualen Bachelorstudiengang Bauingenieurwesen, Netzingenieur (9 Semester) und den Bachelorstudiengang Bauingenieurwesen - Netzingenieur (7 Semester) Abschluss Bachelor of Engineering im Fachbereich Bauingenieurwesen an der Fachhochschule Aachen},
  organization    = {FH Aachen},
  pages     = {2 Seiten},
  year      = {2019},
  language  = {de}
}
@misc{OPUS4-10854,
  title     = {3. Ordnung zur {\"A}nderung der Studien- und Pr{\"u}fungsordnung f{\"u}r den Bachelorstudiengang Bauingenieurwesen (7-semestrig), Bachelorstudiengang Bauingenieurwesen mit Praxissemester (8-semestrig), Bachelorstudiengang Bauingenieurwesen mit Auslandssemester (8-semestrig), Abschluss Bachelor of Engineering},
  organization    = {FH Aachen},
  pages     = {2 Seiten},
  year      = {2019},
  language  = {de}
}