@misc{ButenwegGellertReindletal.2009,
  author    = {Butenweg, Christoph and Gellert, Christoph and Reindl, Lukas and Meskouris, Konstantin},
  title     = {A nonlinear method for the seismic safety verification of masonry buildings},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  year      = {2009},
  abstract  = {In order for traditional masonry to stay a competitive building material in seismically active regions there is an urgent demand for modern, deformation-based verification procedures which exploit the nonlinear load bearing reserves. The Capacity Spectrum Method (CSM) is a widely accepted design approach in the field of reinforced concrete and steel construction. It compares the seismic action with the load-bearing capacity of the building considering nonlinear material behavior with its post-peak capacity. The bearing capacity of the building is calculated iteratively using single wall capacity curves. This paper presents a new approach for the bilinear approximation of single wall capacity curves in the style of EC6/EC8 respectively FEMA 306/FEMA 356 based on recent shear wall test results of the European Collective-Research Project "ESECMaSE". The application of the CSM to masonry structures by using bilinear approximations of capacity curves as input is demonstrated on the example of a typical German residential home.},
  language  = {en}
}
@article{HueningHeuermannWacheetal.2018,
  author    = {H{\"u}ning, Felix and Heuermann, Holger and Wache, Franz-Josef and Jajo, Rami Audisho},
  title     = {A new wireless sensor interface using dual-mode radio},
  series = {Journal of Sensors and Sensor Systems : JSSS},
  volume    = {Volume 7},
  journal   = {Journal of Sensors and Sensor Systems : JSSS},
  number    = {2},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  doi       = {10.5194/jsss-7-507-2018},
  pages     = {507 -- 515},
  year      = {2018},
  abstract  = {The integration of sensors is one of the major tasks in embedded, control and "internet of things" (IoT) applications. For the integration mainly digital interfaces are used, starting from rather simple pulse-width modulation (PWM) interface to more complex interfaces like CAN (Controller Area Network). Even though these interfaces are tethered by definition, a wireless realization is highly welcome in many applications to reduce cable and connector cost, increase the flexibility and realize new emerging applications like wireless control systems. Currently used wireless solutions like Bluetooth, WirelessHART or IO-Link Wireless use dedicated communication standards and corresponding higher protocol layers to realize the wireless communication. Due to the complexity of the communication and the protocol handling, additional latency and jitter are introduced to the data communication that can meet the requirements for many applications. Even though tunnelling of other bus data like CAN data is generally also possible the latency and jitter prevent the tunnelling from being transparent for the bus system. Therefore a new basic technology based on dual-mode radio is used to realize a wireless communication on the physical layer only, enabling a reliable and real-time data transfer. As this system operates on the physical layer it is independent of any higher layers of the OSI (open systems interconnection) model. Hence it can be used for several different communication systems to replace the tethered physical layer. A prototype is developed and tested for real-time wireless PWM, SENT (single-edge nibble transmission) and CAN data transfer with very low latency and jitter.},
  language  = {en}
}
@article{ChenClauserMarquartetal.2015,
  author    = {Chen, Tao and Clauser, Christoph and Marquart, Gabriele and Willbrand, Karen and Mottaghy, Darius},
  title     = {A new upscaling method for fractured porous media},
  series = {Advances in Water Resources},
  volume    = {80},
  journal   = {Advances in Water Resources},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0309-1708},
  doi       = {10.1016/j.advwatres.2015.03.009},
  pages     = {60 -- 68},
  year      = {2015},
  language  = {en}
}
@article{GoettscheGoetzbergerDengleretal.1992,
  author    = {G{\"o}ttsche, Joachim and Goetzberger, Adolf and Dengler, J. and Rommel, M. (u.a.)},
  title     = {A new transparently insulated, bifacially irradiated solar flat-plate collector / A. Goetzberger ; J. Dengler ; M. Rommel ; J. G{\"o}ttsche ; V. Wittwer},
  series = {Solar energy. 49 (1992), H. 5},
  journal   = {Solar energy. 49 (1992), H. 5},
  isbn      = {0038-092X},
  pages     = {403 -- 411},
  year      = {1992},
  language  = {en}
}
@article{MourzinaSchoeningSchubertetal.2000,
  author    = {Mourzina, Y.G. and Sch{\"o}ning, Michael Josef and Schubert, J. and Zander, W. and Legin, A. V. and Vlasov, Y. G. and Kordos, P. and L{\"u}th, H.},
  title     = {A new thin film Pb microsensor based on chalcogenide glasses},
  series = {Sensors and Actuators B. 71 (2000), H. 1-2},
  journal   = {Sensors and Actuators B. 71 (2000), H. 1-2},
  isbn      = {0925-4005},
  pages     = {13 -- 18},
  year      = {2000},
  language  = {en}
}
@article{SchwarzerdaSilvaHoffschmidtetal.2009,
  author    = {Schwarzer, Klemens and da Silva, Vieira E. and Hoffschmidt, Bernhard and Schwarzer, T.},
  title     = {A new solar desalination system with heat recovery for decentralised drinking water production},
  series = {Desalination. 248 (2009), H. 1-3},
  journal   = {Desalination. 248 (2009), H. 1-3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0011-9164},
  pages     = {204 -- 211},
  year      = {2009},
  language  = {en}
}
@article{KuertenMottaghyZiegler2015,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {A new model for the description of the heat transfer for plane thermo-active geotechnical systems based on thermal resistances},
  series = {Acta Geotechnica},
  volume    = {10},
  journal   = {Acta Geotechnica},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1133},
  doi       = {10.1007/s11440-014-0311-6},
  pages     = {219 -- 229},
  year      = {2015},
  language  = {en}
}
@article{GrottkeBraunschweigPhilippenetal.2010,
  author    = {Grottke, O. and Braunschweig, T. and Philippen, B. and Gatzweiler, Karl-Heinz and Gronloh, N. and Staat, Manfred and Rossaint, R. and Tolba, R.},
  title     = {A New Model for Blunt Liver Injuries in the Swine},
  series = {European Surgical Research. 44 (2010), H. 2},
  journal   = {European Surgical Research. 44 (2010), H. 2},
  isbn      = {1421-9921},
  pages     = {65 -- 73},
  year      = {2010},
  language  = {en}
}
@inproceedings{UibelBlass2010,
  author    = {Uibel, Thomas and Blaß, Hans Joachim},
  title     = {A new method to determine suitable spacings and distances for self-tapping screws},
  series = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures},
  volume    = {43},
  booktitle = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures},
  publisher = {Lehrstuhl f{\"u}r Ingenieurholzbau und Baukonstruktionen},
  address   = {Karlsruhe},
  issn      = {1864-1784},
  year      = {2010},
  abstract  = {The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.},
  language  = {en}
}
@inproceedings{Schwarzer1992,
  author    = {Schwarzer, Klemens},
  title     = {A new kind of efficient solar cookers with and without temporary heat storage},
  series = {Advances in solar cooking : proceedings of the First World Conference on Solar Cooking, Stockton, California, USA, June 19 - 20, 1992 / ed. by Edwin Pejack},
  booktitle = {Advances in solar cooking : proceedings of the First World Conference on Solar Cooking, Stockton, California, USA, June 19 - 20, 1992 / ed. by Edwin Pejack},
  publisher = {Solar Box Cookers International},
  address   = {Sacramento, Calif.},
  pages     = {107 -- 112},
  year      = {1992},
  language  = {en}
}
@article{JerominZoor2008,
  author    = {Jeromin, G{\"u}nter Erich and Zoor, Annegreth},
  title     = {A new irreversible enzyme-aided esterification method in organic solvents},
  series = {Biotechnology letters. 30 (2008), H. 5},
  journal   = {Biotechnology letters. 30 (2008), H. 5},
  isbn      = {1573-6776},
  pages     = {925 -- 928},
  year      = {2008},
  language  = {en}
}
@article{LinderBecklerDoerretal.2019,
  author    = {Linder, Peter and Beckler, Matthias and Doerr, Leo and Stoelzle-Feix, Sonja and Fertig, Niels and Jung, Alexander and Staat, Manfred and Gossmann, Matthias},
  title     = {A new in vitro tool to investigate cardiac contractility under physiological mechanical conditions},
  series = {Journal of Pharmacological and Toxicological Methods},
  volume    = {99},
  journal   = {Journal of Pharmacological and Toxicological Methods},
  number    = {Article number 106595},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1056-8719},
  doi       = {10.1016/j.vascn.2019.05.162},
  year      = {2019},
  language  = {en}
}
@inproceedings{KoenigWolf2016,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin},
  title     = {A new definition of competence developing games - and a framework to assess them},
  series = {ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions},
  booktitle = {ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions},
  isbn      = {978-1-61208-468-8},
  pages     = {95 -- 97},
  year      = {2016},
  abstract  = {There are different types of games that try to make use of the motivation of a gaming situation in learning contexts. This paper introduces the new terminology 'Competence Developing Game' (CDG) as an umbrella term for all games with this intention. Based on this new terminology, an assessment framework has been developed and validated in scope of an empirical study. Now, all different types of CDGs can be evaluated according to a defined and uniform set of assessment criteria and, thus, are comparable according to their characteristics and effectiveness.},
  language  = {en}
}
@article{BiselliSchmidtBuechsetal.1999,
  author    = {Biselli, Manfred and Schmidt, S. and B{\"u}chs, J. and Born, C.},
  title     = {A new correlation for the wall-to-fluid mass transfer in liquid-sol fluidized beds / Schmidt, S. ; B{\"u}chs, J. ; Born, C. ; Biselli, M.},
  series = {Chemical Engineering Science. 54 (1999), H. 6},
  journal   = {Chemical Engineering Science. 54 (1999), H. 6},
  isbn      = {0009-2509},
  pages     = {829 -- 839},
  year      = {1999},
  language  = {en}
}
@article{HoffschmidtPitzPaalBoehmer1999,
  author    = {Hoffschmidt, Bernhard and Pitz-Paal, Robert and B{\"o}hmer, M.},
  title     = {A new closed/open volumetric receiver concept for parabolictrough collectors (test results)},
  series = {Journal de physique. 9 (1999), H. 3},
  journal   = {Journal de physique. 9 (1999), H. 3},
  isbn      = {1155-4339},
  pages     = {3},
  year      = {1999},
  language  = {en}
}
@inproceedings{BaeckerKochGeigeretal.2016,
  author    = {B{\"a}cker, Matthias and Koch, C. and Geiger, F. and Eber, F. and Gliemann, H. and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {A New Class of Biosensors Based on Tobacco Mosaic Virus and Coat Proteins as Enzyme Nanocarrier},
  series = {Procedia Engineering},
  volume    = {Vol. 168},
  booktitle = {Procedia Engineering},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2016.11.228},
  pages     = {618 -- 621},
  year      = {2016},
  language  = {en}
}
@inproceedings{GligorevicSorger2002,
  author    = {Gligorevic, Snjezana and Sorger, Ulrich},
  title     = {A new approach to tracking time-variant channels},
  series = {Proceedings / 5th International Symposium on Wireless Personal Multimedia Communications : WPMC : October 27 - 30, 2002, Honolulu, Hawaii ; vol. 3},
  booktitle = {Proceedings / 5th International Symposium on Wireless Personal Multimedia Communications : WPMC : October 27 - 30, 2002, Honolulu, Hawaii ; vol. 3},
  organization    = {International Symposium on Wireless Personal Multimedia Communications <5, 2002, Honolulu>},
  isbn      = {0-7803-7442-8},
  issn      = {1347-6890},
  pages     = {1342 -- 1345},
  year      = {2002},
  language  = {en}
}
@inproceedings{PeekenTroederBenneretal.1986,
  author    = {Peeken, Heinz and Troeder, Christoph and Benner, Joachim and Platt, Werner},
  title     = {A new approach to describe the mechanical performance of flexible couplings in drive systems},
  series = {Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo},
  booktitle = {Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo},
  publisher = {IFToMM},
  address   = {Tokyo},
  pages     = {159 -- 163},
  year      = {1986},
  language  = {en}
}
@inproceedings{BuxbaumSchwarteRingbecketal.1998,
  author    = {Buxbaum, Bernd and Schwarte, Rudolf and Ringbeck, Thorsten and [u.a.],},
  title     = {A new approach in optical broadband communication systems : a high integrated optical phase locked loop based on a mixing and correlating sensor, the Photonic Mixer Device (PMD)},
  series = {Proceedings / OPTO 98, Internationaler Kongress und Fachausstellung f{\"u}r Optische Sensorik, Messtechnik und Elektronik, 18. - 20. Mai 1998, Kongresszentrum Erfurt},
  booktitle = {Proceedings / OPTO 98, Internationaler Kongress und Fachausstellung f{\"u}r Optische Sensorik, Messtechnik und Elektronik, 18. - 20. Mai 1998, Kongresszentrum Erfurt},
  publisher = {ACS Organisations GmbH},
  address   = {Wunsdorf},
  pages     = {59 -- 64},
  year      = {1998},
  language  = {en}
}
@article{PookhalilAmoabedinyTabeshetal.2016,
  author    = {Pookhalil, Ali and Amoabediny, Ghassem and Tabesh, Hadi and Behbahani, Mehdi and Mottaghy, Khosrow},
  title     = {A new approach for semiempirical modeling of mechanical blood trauma},
  series = {The international journal of artificial organs},
  volume    = {39},
  journal   = {The international journal of artificial organs},
  number    = {4},
  publisher = {Sage},
  address   = {London},
  issn      = {1724-6040},
  doi       = {10.5301/ijao.5000474},
  pages     = {171 -- 177},
  year      = {2016},
  abstract  = {Purpose Two semi-empirical models were recently published, both making use of existing literature data, but each taking into account different physical phenomena that trigger hemolysis. In the first model, hemoglobin (Hb) release is described as a permeation procedure across the membrane, assuming a shear stress-dependent process (sublethal model). The second model only accounts for hemoglobin release that is caused by cell membrane breakdown, which occurs when red blood cells (RBC) undergo mechanically induced shearing for a period longer than the threshold time (nonuniform threshold model). In this paper, we introduce a model that considers the hemolysis generated by both these possible phenomena. Methods Since hemolysis can possibly be caused by permeation of hemoglobin through the RBC functional membrane as well as by release of hemoglobin from RBC membrane breakdown, our proposed model combines both these models. An experimental setup consisting of a Couette device was utilized for validation of our proposed model. Results A comparison is presented between the damage index (DI) predicted by the proposed model vs. the sublethal model vs. the nonthreshold model and experimental datasets. This comparison covers a wide range of shear stress for both human and porcine blood. An appropriate agreement between the measured DI and the DI predicted by the present model was obtained. Conclusions The semiempirical hemolysis model introduced in this paper aims for significantly enhanced conformity with experimental data. Two phenomenological outcomes become possible with the proposed approach: an estimation of the average time after which cell membrane breakdown occurs under the applied conditions, and a prediction of the ratio between the phenomena involved in hemolysis.},
  language  = {en}
}
@article{Weigand1992,
  author    = {Weigand, Christoph},
  title     = {A new Approach for Optimal Control of a Production process},
  series = {Economic Quality Control. 7 (1992)},
  journal   = {Economic Quality Control. 7 (1992)},
  isbn      = {0940-5151},
  pages     = {225 -- 251},
  year      = {1992},
  language  = {en}
}
@article{EnningJenayehMuelleretal.1998,
  author    = {Enning, Manfred and Jenayeh, I. and M{\"u}ller, C. and Kositza, N.},
  title     = {A New Approach for Automating Shunting Processes in Marshalling Yards / Jenayeh, I.; M{\"u}ller, C. ; Kositza, N. ; Enning, M. ; Rake, H.},
  series = {Computational Engineering in Systems Applications : 2nd IMACS International Multiconference CESA'98; [abstracts; Nabeul-Hammamet, Tunisia, April 1 - 4, 1998] / ed. by Pierre Borne},
  journal   = {Computational Engineering in Systems Applications : 2nd IMACS International Multiconference CESA'98; [abstracts; Nabeul-Hammamet, Tunisia, April 1 - 4, 1998] / ed. by Pierre Borne},
  publisher = {UCIS},
  address   = {Villeneuve d'Ascq},
  pages     = {338 -- 343},
  year      = {1998},
  language  = {en}
}
@article{MuellerVeggianHaenniBeuscheretal.1981,
  author    = {M{\"u}ller-Veggian, Mattea and Haenni, D. R. and Beuscher, H. and Bochev, B.},
  title     = {A new 5.0 ns isomer in ¹⁴⁴ Eu},
  series = {Nuclear physics / A. 365 (1981), H. 2},
  journal   = {Nuclear physics / A. 365 (1981), H. 2},
  isbn      = {0375-9474},
  pages     = {229 -- 236},
  year      = {1981},
  language  = {en}
}
@article{FassbenderVogler1991,
  author    = {Faßbender, Heinz and Vogler, Heiko},
  title     = {A narrowing machine for the functional logic language BABEL, restricted to primitive recursion : abstract},
  series = {Granada Workshop on the Integration of Functional and Logic Programming / Granada Workshop on the Integration of Functional and Logic Programming <1990>. K. Indermark ... (ed.)},
  journal   = {Granada Workshop on the Integration of Functional and Logic Programming / Granada Workshop on the Integration of Functional and Logic Programming <1990>. K. Indermark ... (ed.)},
  publisher = {RWTH, Fachgruppe Informatik},
  address   = {Aachen},
  pages     = {95 -- 96},
  year      = {1991},
  language  = {en}
}
@article{MayerHentschkeHageretal.2017,
  author    = {Mayer, Jan and Hentschke, Reinhard and Hager, Jonathan and Hojdis, Nils and Karimi-Varnaneh, Hossein Ali},
  title     = {A Nano-Mechanical Instability as Primary Contribution to Rolling Resistance},
  series = {Scientific Reports},
  volume    = {7},
  journal   = {Scientific Reports},
  number    = {Article number 11275},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2045-2322},
  year      = {2017},
  language  = {en}
}
@article{LeschingerBirgelHackletal.2019,
  author    = {Leschinger, Tim and Birgel, Stefan and Hackl, Michael and Staat, Manfred and M{\"u}ller, Lars Peter and Wegmann, Kilian},
  title     = {A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair},
  series = {Computer Methods in Biomechanics and Biomedical Engineering},
  journal   = {Computer Methods in Biomechanics and Biomedical Engineering},
  number    = {Early view},
  publisher = {Taylor \& Francis},
  address   = {London},
  doi       = {10.1080/10255842.2019.1572749},
  year      = {2019},
  language  = {en}
}
@article{GoemmelButenwegBolenderetal.2007,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Bolender, Katrin and Grunendahl, Arno},
  title     = {A muscle controlled finite-element model of laryngeal abduction and adduction},
  series = {Computer methods in biomechanics and biomedical engineering},
  volume    = {Volume 10},
  journal   = {Computer methods in biomechanics and biomedical engineering},
  number    = {Issue 5},
  issn      = {1476-8259 (E-Journal); 1025-5842 (Print)},
  pages     = {377 -- 388},
  year      = {2007},
  language  = {en}
}
@inproceedings{ErmelenkoYoshinobuMourzinaetal.2003,
  author    = {Ermelenko, Y. and Yoshinobu, T. and Mourzina, Y. and Sch{\"o}ning, Michael Josef and Vlasov, Y. and Iwasaki, H.},
  title     = {A multisensor based on laser scanned silicon transducer (LSST): development and properties},
  series = {Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimar{\~a}es, Portugal, September 21 - 24, 2003},
  booktitle = {Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimar{\~a}es, Portugal, September 21 - 24, 2003},
  pages     = {72 -- 73},
  year      = {2003},
  language  = {en}
}
@inproceedings{MeskourisHollerButenwegetal.2009,
  author    = {Meskouris, Konstantin and Holler, Stefan and Butenweg, Christoph and Meiners, Daniel},
  title     = {A multiphase model with hypoplastic formulation of the solid phase and its application to earthquake engineering problems},
  series = {Computational structural dynamics and earthquake engineering / ed. by Manolis Papadrakakis .... (Structures and infrastructures series ; 2)},
  booktitle = {Computational structural dynamics and earthquake engineering / ed. by Manolis Papadrakakis .... (Structures and infrastructures series ; 2)},
  publisher = {CRC Press},
  address   = {Boca Raton, Fla. [u.a.]},
  isbn      = {978-0-415-45261-8},
  doi       = {10.1201/9780203881637.ch19},
  pages     = {293 -- 308},
  year      = {2009},
  language  = {en}
}
@inproceedings{TranStaatStavroulakis2014,
  author    = {Tran, Ngoc Trinh and Staat, Manfred and Stavroulakis, G. E.},
  title     = {A multicriteria method for truss optimization},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{BagheriSchleupenDahmannetal.2015,
  author    = {Bagheri, Mohsen and Schleupen, Josef and Dahmann, Peter and Kallweit, Stephan},
  title     = {A multi-functional device applying for the safe maintenance at high-altitude on wind turbines},
  series = {20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015},
  booktitle = {20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015},
  organization    = {International Conference on Composite Materials <20, 2015, Copenhagen>},
  pages     = {1 -- 6},
  year      = {2015},
  language  = {en}
}
@article{ArtmannShiAgostietal.1998,
  author    = {Artmann, Gerhard and Shi, Young de and Agosti, R. and Longhini, E.},
  title     = {A modified casson equation to characterize blood rheology for hypertension. Shi, Young de; Artmann, Gerhard Michael; Agosti, R.; Longhini, E.},
  series = {Clinical Hemorheology Microcirculation. 19 (1998), H. 2},
  journal   = {Clinical Hemorheology Microcirculation. 19 (1998), H. 2},
  isbn      = {1386-0291},
  pages     = {115 -- 127},
  year      = {1998},
  language  = {en}
}
@incollection{AltherrDoerigEdereretal.2017,
  author    = {Altherr, Lena and D{\"o}rig, Bastian and Ederer, Thorsten and Pelz, Peter Franz and Pfetsch, Marc and Wolf, Jan},
  title     = {A mixed-integer nonlinear program for the design of gearboxes},
  series = {Operations Research Proceedings 2016},
  booktitle = {Operations Research Proceedings 2016},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-55701-4},
  doi       = {10.1007/978-3-319-55702-1_31},
  pages     = {227 -- 233},
  year      = {2017},
  abstract  = {Gearboxes are mechanical transmission systems that provide speed and torque conversions from a rotating power source. Being a central element of the drive train, they are relevant for the efficiency and durability of motor vehicles. In this work, we present a new approach for gearbox design: Modeling the design problem as a mixed-integer nonlinear program (MINLP) allows us to create gearbox designs from scratch for arbitrary requirements and—given enough time—to compute provably globally optimal designs for a given objective. We show how different degrees of freedom influence the runtime and present an exemplary solution.},
  language  = {en}
}
@article{HoylerAndrejtscheffPetkov1986,
  author    = {Hoyler, Friedrich and Andrejtscheff, W. and Petkov, P.},
  title     = {A mixed symmetry or quasineutron pair interpretation of the Kpi =03+ level in 172Yb / W. Andrejtscheff ; P. Petkov ... F. Hoyler},
  series = {Journal of physics / G. 12 (1986), H. 6},
  journal   = {Journal of physics / G. 12 (1986), H. 6},
  isbn      = {0305-4616},
  pages     = {L151 -- L156},
  year      = {1986},
  language  = {en}
}
@article{DittusTuryshevDachwaldetal.2005,
  author    = {Dittus, H. and Turyshev, S. G. and Dachwald, Bernd and Blome, Hans-Joachim},
  title     = {A Mission to Explore the Pioneer Anomaly},
  series = {Proceedings of the 39th ESLAB Symposium "Trends in Space Science and Cosmic Vision 2020" : 19 - 21 April 2005, ESTEC, Noordwijk, the Netherlands / European Space Agency. [Comp. by: F. Favata ...] . - (ESA SP ; 588)},
  journal   = {Proceedings of the 39th ESLAB Symposium "Trends in Space Science and Cosmic Vision 2020" : 19 - 21 April 2005, ESTEC, Noordwijk, the Netherlands / European Space Agency. [Comp. by: F. Favata ...] . - (ESA SP ; 588)},
  publisher = {ESA Publ. Div.},
  address   = {Noordwijk},
  isbn      = {9290928999},
  pages     = {3 -- 10},
  year      = {2005},
  language  = {en}
}
@article{NaetherAugerPoghossianetal.2004,
  author    = {N{\"a}ther, Niko and Auger, V. and Poghossian, Arshak and Koudelka-Hep, M. and Sch{\"o}ning, Michael Josef},
  title     = {A miniaturized flow-through cell in SU-8 technique for EIS sensors},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {994 -- 995},
  year      = {2004},
  language  = {en}
}
@article{Artmann1986,
  author    = {Artmann, Gerhard},
  title     = {A microscopic photometric method for measuring erythrocyte deformability. Artmann, Gerhard Michael},
  series = {Clinical Hemorheology. 6 (1986)},
  journal   = {Clinical Hemorheology. 6 (1986)},
  isbn      = {0271-5198},
  pages     = {617 -- 627},
  year      = {1986},
  language  = {en}
}
@article{MorenoiCodinachsBirkenstockGarmaetal.2009,
  author    = {Moreno i Codinachs, L. and Birkenstock, C. and Garma, T. and Zierold, R. and Bachmann, J. and Nielsch, K. and Sch{\"o}ning, Michael Josef and Fontcuberta i Morral, A.},
  title     = {A micron-sized nanoporous multifunction sensing device},
  series = {physica status solidi (a) . 206 (2009), H. 3},
  journal   = {physica status solidi (a) . 206 (2009), H. 3},
  publisher = {Wiley},
  address   = {Weinheim},
  isbn      = {1862-6319},
  pages     = {435 -- 441},
  year      = {2009},
  language  = {en}
}
@article{OrzadaLaddBitz2016,
  author    = {Orzada, Stephan and Ladd, Mark E. and Bitz, Andreas},
  title     = {A method to approximate maximum local SAR in multichannel transmit MR systems without transmit phase information},
  series = {Magnetic Resonance in Medicine},
  volume    = {78},
  journal   = {Magnetic Resonance in Medicine},
  number    = {2},
  publisher = {International Society for Magnetic Resonance in Medicine},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.26398},
  pages     = {805 -- 811},
  year      = {2016},
  abstract  = {Purpose To calculate local specific absorption rate (SAR) correctly, both the amplitude and phase of the signal in each transmit channel have to be known. In this work, we propose a method to derive a conservative upper bound for the local SAR, with a reasonable safety margin without knowledge of the transmit phases of the channels. Methods The proposed method uses virtual observation points (VOPs). Correction factors are calculated for each set of VOPs that prevent underestimation of local SAR when the VOPs are applied with the correct amplitudes but fixed phases. Results The proposed method proved to be superior to the worst-case calculation based on the maximum eigenvalue of the VOPs. The mean overestimation for six coil setups could be reduced, whereas no underestimation of the maximum local SAR occurred. In the best investigated case, the overestimation could be reduced from a factor of 3.3 to a factor of 1.7. Conclusion The upper bound for the local SAR calculated with the proposed method allows a fast estimation of the local SAR based on power measurements in the transmit channels and facilitates SAR monitoring in systems that do not have the capability to monitor transmit phases},
  language  = {en}
}
@misc{StadtmuellerTippkoetterUlber2013,
  author    = {Stadtm{\"u}ller, Ralf and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {A method for production of single-stranded nucleic acids [Europ{\"a}ische Patentanmeldung]},
  publisher = {Europ{\"a}isches Patentamt},
  address   = {Den Hague},
  pages     = {14 Seiten},
  year      = {2013},
  language  = {en}
}
@article{Ziemons1988,
  author    = {Ziemons, Karl},
  title     = {A measurement of the spin asymmetry of the structure function g1 in deep inelastic muon-proton scattering},
  series = {Physics Letters B},
  volume    = {206},
  journal   = {Physics Letters B},
  number    = {2},
  isbn      = {0370-2693},
  pages     = {364 -- 370},
  year      = {1988},
  abstract  = {The spin asymmetry in deep inelastic scattering of longitudinally polarised muons by longitudinally polarised protons has been measured over a large x range (0.01<x<0.7). The spin-dependent structure function g1(x) for the proton has been determined and its integral over x found to be 0.114±0.012±0.026, in disagreement with the Ellis-Jaffe sum rule. Assuming the validity of the Bjorken sum rule, this result implies a significant negative value for the integral of g1 for the neutron. These values for the integrals of g1 lead to the conclusion that the total quark spin constitutes a rather small fraction of the spin of the nucleon.},
  language  = {en}
}
@article{Ziemons1993,
  author    = {Ziemons, Karl},
  title     = {A measurement of the ratio of the nucleon structure function in copper and deuterium},
  series = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  volume    = {57},
  journal   = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  number    = {2},
  isbn      = {1431-5858},
  pages     = {211 -- 218},
  year      = {1993},
  abstract  = {Results are presented on the ratios of the nucleon structure function in copper to deuterium from two separate experiments. The data confirm that the nucleon structure function,F 2, is different for bound nucleons than for the quasi-free ones in the deuteron. The redistribution in the fraction of the nucleon's momentum carried by quarks is investigated and it is found that the data are compatible with no integral loss of quark momenta due to nuclear effects.},
  language  = {en}
}
@article{Hillen1982,
  author    = {Hillen, Walter},
  title     = {A measurement of \&\#963;tot(e+e\&\#8722; \&\#8594; hadrons) for cm energies between 12.0 and 36.7 GeV. TASSO Collaboration},
  series = {Physics Letters B. 113 (1982), H. 6},
  journal   = {Physics Letters B. 113 (1982), H. 6},
  pages     = {499 -- 508},
  year      = {1982},
  language  = {en}
}
@article{FleischhakerEvers2011,
  author    = {Fleischhaker, Robert and Evers, J{\"o}rg},
  title     = {A Maxwell-Schr{\"o}dinger solver for quantum optical few-level systems},
  series = {Computer Physics Communications},
  volume    = {182},
  journal   = {Computer Physics Communications},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0010-4655},
  doi       = {10.1016/j.cpc.2010.10.018},
  pages     = {739 -- 747},
  year      = {2011},
  abstract  = {The msprop program presented in this work is capable of solving the Maxwell-Schr{\"o}dinger equations for one or several laser fields propagating through a medium of quantum optical few-level systems in one spatial dimension and in time. In particular, it allows to numerically treat systems in which a laser field interacts with the medium with both its electric and magnetic component at the same time. The internal dynamics of the few-level system is modeled by a quantum optical master equation which includes coherent processes due to optical transitions driven by the laser fields as well as incoherent processes due to decay and dephasing. The propagation dynamics of the laser fields is treated in slowly varying envelope approximation resulting in a first order wave equation for each laser field envelope function. The program employs an Adams predictor formula second order in time to integrate the quantum optical master equation and a Lax-Wendroff scheme second order in space and time to evolve the wave equations for the fields. The source function in the Lax-Wendroff scheme is specifically adapted to allow taking into account the simultaneous coupling of a laser field to the polarization and the magnetization of the medium. To reduce execution time, a customized data structure is implemented and explained. In three examples the features of the program are demonstrated and the treatment of a system with a phase-dependent cross coupling of the electric and magnetic field component of a laser field is shown.},
  language  = {en}
}
@inproceedings{HeuermannHarzheimMuehmel2021,
  author    = {Heuermann, Holger and Harzheim, Thomas and M{\"u}hmel, Marc},
  title     = {A maritime harmonic radar search and rescue system using passive and active tags},
  series = {2020 17th European Radar Conference (EuRAD)},
  booktitle = {2020 17th European Radar Conference (EuRAD)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-2-87487-061-3},
  doi       = {10.1109/EuRAD48048.2021.00030},
  pages     = {73 -- 76},
  year      = {2021},
  abstract  = {This article introduces a new maritime search and rescue system based on S-band illumination harmonic radar (HR). Passive and active tags have been developed and tested attached to life jackets and a rescue boat. This system was able to detect and range the active tags up to a range of 5800 m in tests on the Baltic Sea with an antenna input power of only 100 W. All electronic GHz components of the system, excluding the S-band power amplifier, were custom developed for this purpose. Special attention is given to the performance and conceptual differences between passive and active tags used in the system and integration with a maritime X-band navigation radar is demonstrated.},
  language  = {en}
}
@article{Grotendorst1991,
  author    = {Grotendorst, Johannes},
  title     = {A Maple package for transforming series, sequences and functions},
  series = {Computer Physics Communications. 67 (1991), H. 2},
  journal   = {Computer Physics Communications. 67 (1991), H. 2},
  isbn      = {0010-4655},
  pages     = {325 -- 342},
  year      = {1991},
  language  = {en}
}
@inproceedings{KreyerMuellerEsch2020,
  author    = {Kreyer, J{\"o}rg and M{\"u}ller, Marvin and Esch, Thomas},
  title     = {A Map-Based Model for the Determination of Fuel Consumption for Internal Combustion Engines as a Function of Flight Altitude},
  publisher = {DGLR},
  address   = {Bonn},
  doi       = {10.25967/490162},
  pages     = {13 Seiten},
  year      = {2020},
  abstract  = {In addition to very high safety and reliability requirements, the design of internal combustion engines (ICE) in aviation focuses on economic efficiency. The objective must be to design the aircraft powertrain optimized for a specific flight mission with respect to fuel consumption and specific engine power. Against this background, expert tools provide valuable decision-making assistance for the customer. In this paper, a mathematical calculation model for the fuel consumption of aircraft ICE is presented. This model enables the derivation of fuel consumption maps for different engine configurations. Depending on the flight conditions and based on these maps, the current and the integrated fuel consumption for freely definable flight emissions is calculated. For that purpose, an interpolation method is used, that has been optimized for accuracy and calculation time. The mission boundary conditions flight altitude and power requirement of the ICE form the basis for this calculation. The mathematical fuel consumption model is embedded in a parent program. This parent program presents the simulated fuel consumption by means of an example flight mission for a representative airplane. The focus of the work is therefore on reproducing exact consumption data for flight operations. By use of the empirical approaches according to Gagg-Farrar [1] the power and fuel consumption as a function of the flight altitude are determined. To substantiate this approaches, a 1-D ICE model based on the multi-physical simulation tool GT-Suite® has been created. This 1-D engine model offers the possibility to analyze the filling and gas change processes, the internal combustion as well as heat and friction losses for an ICE under altitude environmental conditions. Performance measurements on a dynamometer at sea level for a naturally aspirated ICE with a displacement of 1211 ccm used in an aviation aircraft has been done to validate the 1-D ICE model. To check the plausibility of the empirical approaches with respect to the fuel consumption and performance adjustment for the flight altitude an analysis of the ICE efficiency chain of the 1-D engine model is done. In addition, a comparison of literature and manufacturer data with the simulation results is presented.},
  language  = {en}
}
@article{BragardvanHoekDeDoncker2012,
  author    = {Bragard, Michael and van Hoek, H. and De Doncker, R. W.},
  title     = {A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance},
  series = {IEEE transactions on power electronics},
  volume    = {27},
  journal   = {IEEE transactions on power electronics},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2012.2189136},
  pages     = {4163 -- 4171},
  year      = {2012},
  abstract  = {This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.},
  language  = {en}
}
@article{NiemuellerFerreinLakemeyer2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {A Lua-based Behavior Engine for Controlling the Humanoid Robot Nao},
  series = {RoboCup 2009: Robot Soccer World Cup XIII},
  journal   = {RoboCup 2009: Robot Soccer World Cup XIII},
  pages     = {240 -- 251},
  year      = {2010},
  language  = {en}
}
@article{SchoeningThustVetteretal.1996,
  author    = {Sch{\"o}ning, Michael Josef and Thust, M. and Vetter, J. and Kordos, P. (u.a.)},
  title     = {A long-term stable penicillin-sensitive potentiometric biosensor with enzyme immobilized by heterobifunctional crosslinking},
  isbn      = {0378-4304},
  pages     = {115 -- 121},
  year      = {1996},
  language  = {en}
}
@article{SimonisRugeMuellerVeggianetal.2003,
  author    = {Simonis, A. and Ruge, C. and M{\"u}ller-Veggian, Mattea and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {A long-term stable macroporoustype EIS structure for electrochemical sensor applications},
  series = {Sensors and Actuators B. 91 (2003), H. 1-3},
  journal   = {Sensors and Actuators B. 91 (2003), H. 1-3},
  isbn      = {0925-4005},
  pages     = {21 -- 25},
  year      = {2003},
  language  = {en}
}
@article{FerreinRensMeyeretal.2011,
  author    = {Ferrein, Alexander and Rens, Gavin and Meyer, Thomas and Lakemeyer, Gerhard},
  title     = {A Logic for Specifying Partially Observable Stochastic Domains / Rens, Gavin ; Meyer, Thomas ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Proceedings of the Ninth International Workshop pn non-Monotonic Reasoning, Action and Change (NRAC`11)},
  journal   = {Proceedings of the Ninth International Workshop pn non-Monotonic Reasoning, Action and Change (NRAC`11)},
  pages     = {15 -- 22},
  year      = {2011},
  language  = {en}
}
@article{RensVarzinczakMeyeretal.2010,
  author    = {Rens, Gavin and Varzinczak, Ivan and Meyer, Thomas and Ferrein, Alexander},
  title     = {A Logic for Reasoning about Actions and Explicit Observations},
  series = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  journal   = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-17431-5},
  pages     = {395 -- 404},
  year      = {2010},
  language  = {en}
}
@inproceedings{LimpertSchifferFerrein2015,
  author    = {Limpert, Nicolas and Schiffer, Stefan and Ferrein, Alexander},
  title     = {A Local Planner for Ackermann-Driven Vehicles in ROS SBPL},
  series = {Proceedings of the International Conference on Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech), 2015},
  booktitle = {Proceedings of the International Conference on Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech), 2015},
  doi       = {10.1109/RoboMech.2015.7359518},
  pages     = {172 -- 177},
  year      = {2015},
  language  = {en}
}
@article{WagnerMolinaBisellietal.2007,
  author    = {Wagner, Torsten and Molina, R. and Biselli, Manfred and Canzoneri, Michele and Schnitzler, Thomas and Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {A light-addressable potentiometric sensor system for fast, simultaneous and spatial detection of the metabolic activity of biological cells},
  series = {Transducers '07 Eurosensors XXI : digest of technical papers ; the14th International Conference on Solid-State Sensors, Actuators and Microsystems, June 10-14, 2007, Lyon, France / Gilles Delapierre (Ed.)},
  journal   = {Transducers '07 Eurosensors XXI : digest of technical papers ; the14th International Conference on Solid-State Sensors, Actuators and Microsystems, June 10-14, 2007, Lyon, France / Gilles Delapierre (Ed.)},
  publisher = {IEEE},
  address   = {Piscataway},
  isbn      = {1-4244-0841-5},
  pages     = {1107 -- 1110},
  year      = {2007},
  language  = {en}
}
@article{DantismRoehlenWagneretal.2019,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Wagner, Torsten and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {A LAPS-based differential sensor for parallelized metabolism monitoring of various bacteria},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {21},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19214692},
  pages     = {Artikel 4692},
  year      = {2019},
  abstract  = {Monitoring the cellular metabolism of bacteria in (bio)fermentation processes is crucial to control and steer them, and to prevent undesired disturbances linked to metabolically inactive microorganisms. In this context, cell-based biosensors can play an important role to improve the quality and increase the yield of such processes. This work describes the simultaneous analysis of the metabolic behavior of three different types of bacteria by means of a differential light-addressable potentiometric sensor (LAPS) set-up. The study includes Lactobacillus brevis, Corynebacterium glutamicum, and Escherichia coli, which are often applied in fermentation processes in bioreactors. Differential measurements were carried out to compensate undesirable influences such as sensor signal drift, and pH value variation during the measurements. Furthermore, calibration curves of the cellular metabolism were established as a function of the glucose concentration or cell number variation with all three model microorganisms. In this context, simultaneous (bio)sensing with the multi-organism LAPS-based set-up can open new possibilities for a cost-effective, rapid detection of the extracellular acidification of bacteria on a single sensor chip. It can be applied to evaluate the metabolic response of bacteria populations in a (bio)fermentation process, for instance, in the biogas fermentation process.},
  language  = {en}
}
@article{KonstantinidisFloresMartinezDachwaldetal.2015,
  author    = {Konstantinidis, Konstantinos and Flores Martinez, Claudio and Dachwald, Bernd and Ohndorf, Andreas and Dykta, Paul and Bowitz, Pascal and Rudolph, Martin and Digel, Ilya and Kowalski, Julia and Voigt, Konstantin and F{\"o}rstner, Roger},
  title     = {A lander mission to probe subglacial water on Saturn's moon enceladus for life},
  series = {Acta astronautica},
  volume    = {Vol. 106},
  journal   = {Acta astronautica},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2030 (E-Journal); 0094-5765 (Print)},
  pages     = {63 -- 89},
  year      = {2015},
  language  = {en}
}
@article{AletseeBaumann1991,
  author    = {Aletsee, Ludwig and Baumann, Marcus},
  title     = {A laboratory incubator equipped with facilities to automatically simulate natural irradiance},
  series = {Boletim do Instituto Oceanogr{\´a}fico / Universidade de S{\~a}o Paulo},
  volume    = {Vol. 39},
  journal   = {Boletim do Instituto Oceanogr{\´a}fico / Universidade de S{\~a}o Paulo},
  number    = {No. 2},
  issn      = {1982-436X; 0080-6331},
  pages     = {155 -- 159},
  year      = {1991},
  language  = {en}
}
@article{NguyenRaatschenStaat2010,
  author    = {Nguyen, N.-H. and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {A hyperelastic model of biological tissue materials in tubular organs},
  pages     = {1 -- 12},
  year      = {2010},
  language  = {en}
}
@article{UlmerBraunChengetal.2023,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {A human factors-aware assistance system in manufacturing based on gamification and hardware modularisation},
  series = {International Journal of Production Research},
  journal   = {International Journal of Production Research},
  publisher = {Taylor \& Francis},
  issn      = {0020-7543 (Print)},
  doi       = {10.1080/00207543.2023.2166140},
  year      = {2023},
  abstract  = {Assistance systems have been widely adopted in the manufacturing sector to facilitate various processes and tasks in production environments. However, existing systems are mostly equipped with rigid functional logic and do not provide individual user experiences or adapt to their capabilities. This work integrates human factors in assistance systems by adjusting the hardware and instruction presented to the workers' cognitive and physical demands. A modular system architecture is designed accordingly, which allows a flexible component exchange according to the user and the work task. Gamification, the use of game elements in non-gaming contexts, has been further adopted in this work to provide level-based instructions and personalised feedback. The developed framework is validated by applying it to a manual workstation for industrial assembly routines.},
  language  = {en}
}
@article{CzarneckiSpiliopoulou2012,
  author    = {Czarnecki, Christian and Spiliopoulou, Myra},
  title     = {A holistic framework for the implementation of a next generation network},
  series = {International Journal of Business Information Systems},
  volume    = {9},
  journal   = {International Journal of Business Information Systems},
  number    = {4},
  publisher = {Inderscience Enterprises},
  address   = {Olney, Bucks},
  issn      = {1746-0972},
  doi       = {10.1504/IJBIS.2012.046291},
  pages     = {385 -- 401},
  year      = {2012},
  abstract  = {As the potential of a next generation network (NGN) is recognised, telecommunication companies consider switching to it. Although the implementation of an NGN seems to be merely a modification of the network infrastructure, it may trigger or require changes in the whole company, because it builds upon the separation between service and transport, a flexible bundling of services to products and the streamlining of the IT infrastructure. We propose a holistic framework, structured into the layers 'strategy', 'processes' and 'information systems' and incorporate into each layer all concepts necessary for the implementation of an NGN, as well as the alignment of these concepts. As a first proof-of-concept for our framework we have performed a case study on the introduction of NGN in a large telecommunication company; we show that our framework captures all topics that are affected by an NGN implementation.},
  language  = {en}
}
@article{RauschFriesenAltherretal.2018,
  author    = {Rausch, Lea and Friesen, John and Altherr, Lena and Meck, Marvin and Pelz, Peter F.},
  title     = {A holistic concept to design optimal water supply infrastructures for informal settlements using remote sensing data},
  series = {Remote Sensing},
  volume    = {10},
  journal   = {Remote Sensing},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  isbn      = {2072-4292},
  doi       = {10.3390/rs10020216},
  pages     = {1 -- 23},
  year      = {2018},
  abstract  = {Ensuring access to water and sanitation for all is Goal No. 6 of the 17 UN Sustainability Development Goals to transform our world. As one step towards this goal, we present an approach that leverages remote sensing data to plan optimal water supply networks for informal urban settlements. The concept focuses on slums within large urban areas, which are often characterized by a lack of an appropriate water supply. We apply methods of mathematical optimization aiming to find a network describing the optimal supply infrastructure. Hereby, we choose between different decentral and central approaches combining supply by motorized vehicles with supply by pipe systems. For the purposes of illustration, we apply the approach to two small slum clusters in Dhaka and Dar es Salaam. We show our optimization results, which represent the lowest cost water supply systems possible. Additionally, we compare the optimal solutions of the two clusters (also for varying input parameters, such as population densities and slum size development over time) and describe how the result of the optimization depends on the entered remote sensing data.},
  language  = {en}
}
@article{GerhardsBelloumBerretzetal.2010,
  author    = {Gerhards, M. and Belloum, A. and Berretz, F. and Sander, Volker and Skorupa, S.},
  title     = {A history-tracing XML-based provenance framework for workflows},
  isbn      = {978-1-4244-8989-3},
  pages     = {1 -- 10},
  year      = {2010},
  language  = {en}
}
@article{SchoeningTsarouchasSchaubetal.1996,
  author    = {Sch{\"o}ning, Michael Josef and Tsarouchas, D. and Schaub, A. and Beckers, L. (u.a.)},
  title     = {A highly long-term stable silicon-based pH sensor using pulsed laser deposition technique},
  series = {Sensors and Actuators B. 35 (1996), H. 1-3},
  journal   = {Sensors and Actuators B. 35 (1996), H. 1-3},
  isbn      = {0925-4005},
  pages     = {228 -- 233},
  year      = {1996},
  language  = {en}
}
@inproceedings{RingbeckBuxbaum2000,
  author    = {Ringbeck, Thorsten and Buxbaum, Bernd},
  title     = {A highly integrated monolithic electro-optical PLL in CMOS-technology (PMD-PLL) for communication and ranging systems},
  series = {Proceedings / OPTO 2000, 4th International Conference and Exhibition on Optoelectronics, Optical Sensors and Measuring Techniques : May 9 - 11, 2000, Erfurt Fair, Conference Centre},
  booktitle = {Proceedings / OPTO 2000, 4th International Conference and Exhibition on Optoelectronics, Optical Sensors and Measuring Techniques : May 9 - 11, 2000, Erfurt Fair, Conference Centre},
  publisher = {AMA Service GmbH},
  address   = {Wunsdorf},
  pages     = {235 -- 239},
  year      = {2000},
  language  = {en}
}
@inproceedings{GoettenFingerHavermannetal.2019,
  author    = {G{\"o}tten, Falk and Finger, Felix and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees},
  title     = {A highly automated method for simulating airfoil characteristics at low Reynolds number using a RANS - transition approach},
  series = {Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany},
  booktitle = {Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany},
  doi       = {10.25967/490026},
  pages     = {1 -- 14},
  year      = {2019},
  language  = {en}
}
@article{GossmannThomasHorvathetal.2020,
  author    = {Gossmann, Matthias and Thomas, Ulrich and Horv{\´a}th, Andr{\´a}s and Dragicevic, Elena and Stoelzle-Feix, Sonja and Jung, Alexander and Raman, Aravind Hariharan and Staat, Manfred and Linder, Peter},
  title     = {A higher-throughput approach to investigate cardiac contractility in vitro under physiological mechanical conditions},
  series = {Journal of Pharmacological and Toxicological Methods},
  volume    = {105},
  journal   = {Journal of Pharmacological and Toxicological Methods},
  number    = {Article 106843},
  publisher = {Elsevier},
  address   = {New York, NY},
  doi       = {10.1016/j.vascn.2020.106843},
  year      = {2020},
  language  = {en}
}
@article{BouwmanGuldenHeijdenetal.2013,
  author    = {Bouwman, Peter and Gulden, Hanneke van der and Heijden, Ingrid van der and Drost, Rinske and Klijn, Christiaan N. and Prasetyanti, Pramudita and Pieterse, Mark and Wientjens, Ellen and Seibler, Jost and Hogervorst, Frank B. L. and Jonkers, Jos},
  title     = {A High-Throughput Functional Complementation Assay for Classification of BRCA1 Missense Variants},
  series = {Cancer Discovery},
  journal   = {Cancer Discovery},
  number    = {3},
  issn      = {2159-8290},
  doi       = {10.1158/2159-8290.CD-13-0094},
  pages     = {1142 -- 1152},
  year      = {2013},
  language  = {en}
}
@article{MiyamotoHayashiSakamotoetal.2017,
  author    = {Miyamoto, Ko-ichiro and Hayashi, Kosuke and Sakamoto, Azuma and Werner, Frederik and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {A high-Q resonance-mode measurement of EIS capacitive sensor by elimination of series resistance},
  series = {Sensor and Actuators B: Chemical},
  volume    = {248},
  journal   = {Sensor and Actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2017.03.002},
  pages     = {1006 -- 1010},
  year      = {2017},
  abstract  = {An EIS capacitive sensor is a semiconductor-based potentiometric sensor, which is sensitive to the ion concentration or pH value of the solution in contact with the sensing surface. To detect a small change in the ion concentration or pH, a small capacitance change must be detected. Recently, a resonance-mode measurement was proposed, in which an inductor was connected to the EIS capacitive sensor and the resonant frequency was correlated with the pH value. In this study, the Q factor of the resonant circuit was enhanced by canceling the internal resistance of the reference electrode and the internal resistance of the inductor coil with the help of a bypass capacitor and a negative impedance converter, respectively. 1\% variation of the signal in the developed system corresponded to a pH change of 3.93 mpH, which was about 1/12 of the conventional method, suggesting a better performance in detection of a small pH change.},
  language  = {en}
}
@article{WagnerWernerMiyamotoetal.2009,
  author    = {Wagner, Torsten and Werner, Frederik and Miyamoto, K. and Sch{\"o}ning, Michael Josef and Yoshinobu, T.},
  title     = {A high-density multi-point LAPS set-up using a VCSEL array and FPGA control},
  series = {Procedia Chemistry. 1 (2009), H. 1},
  journal   = {Procedia Chemistry. 1 (2009), H. 1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1876-6196},
  pages     = {1483 -- 1486},
  year      = {2009},
  language  = {en}
}
@article{WagnerWernerMiyamotoetal.2011,
  author    = {Wagner, Torsten and Werner, Frederik and Miyamoto, Ko-Ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {A high-density multi-point LAPS set-up using a VCSEL array and FPGA control},
  series = {Sensors and Actuators B: Chemical. 154 (2011), H. 2},
  journal   = {Sensors and Actuators B: Chemical. 154 (2011), H. 2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1873-3077},
  pages     = {124 -- 128},
  year      = {2011},
  language  = {en}
}
@article{WagnerSchoeningOttoetal.2004,
  author    = {Wagner, Torsten and Sch{\"o}ning, Michael Josef and Otto, R. and Yoshinobu, T.},
  title     = {A handheld 16 channel pen-type LAPS as a platform for (bio-)electrochemical sensing},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {996 -- 997},
  year      = {2004},
  language  = {en}
}
@article{BaringhausGaigall2022,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {A goodness-of-fit test for the compound Poisson exponential model},
  series = {Journal of Multivariate Analysis},
  volume    = {195},
  journal   = {Journal of Multivariate Analysis},
  number    = {Article 105154},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0047-259X},
  doi       = {10.1016/j.jmva.2022.105154},
  year      = {2022},
  abstract  = {On the basis of bivariate data, assumed to be observations of independent copies of a random vector (S,N), we consider testing the hypothesis that the distribution of (S,N) belongs to the parametric class of distributions that arise with the compound Poisson exponential model. Typically, this model is used in stochastic hydrology, with N as the number of raindays, and S as total rainfall amount during a certain time period, or in actuarial science, with N as the number of losses, and S as total loss expenditure during a certain time period. The compound Poisson exponential model is characterized in the way that a specific transform associated with the distribution of (S,N) satisfies a certain differential equation. Mimicking the function part of this equation by substituting the empirical counterparts of the transform we obtain an expression the weighted integral of the square of which is used as test statistic. We deal with two variants of the latter, one of which being invariant under scale transformations of the S-part by fixed positive constants. Critical values are obtained by using a parametric bootstrap procedure. The asymptotic behavior of the tests is discussed. A simulation study demonstrates the performance of the tests in the finite sample case. The procedure is applied to rainfall data and to an actuarial dataset. A multivariate extension is also discussed.},
  language  = {en}
}
@article{TopcuMadabhushiStaat2022,
  author    = {Top{\c{c}}u, Murat and Madabhushi, Gopal S.P. and Staat, Manfred},
  title     = {A generalized shear-lag theory for elastic stress transfer between matrix and fibres having a variable radius},
  series = {International Journal of Solids and Structures},
  volume    = {239-240},
  journal   = {International Journal of Solids and Structures},
  number    = {Art. No. 111464},
  publisher = {Elsevier},
  address   = {New York, NY},
  issn      = {0020-7683},
  doi       = {10.1016/j.ijsolstr.2022.111464},
  year      = {2022},
  abstract  = {A generalized shear-lag theory for fibres with variable radius is developed to analyse elastic fibre/matrix stress transfer. The theory accounts for the reinforcement of biological composites, such as soft tissue and bone tissue, as well as for the reinforcement of technical composite materials, such as fibre-reinforced polymers (FRP). The original shear-lag theory proposed by Cox in 1952 is generalized for fibres with variable radius and with symmetric and asymmetric ends. Analytical solutions are derived for the distribution of axial and interfacial shear stress in cylindrical and elliptical fibres, as well as conical and paraboloidal fibres with asymmetric ends. Additionally, the distribution of axial and interfacial shear stress for conical and paraboloidal fibres with symmetric ends are numerically predicted. The results are compared with solutions from axisymmetric finite element models. A parameter study is performed, to investigate the suitability of alternative fibre geometries for use in FRP.},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {A Generalization of the Txx Network Analyzer Self-Calibration Procedure},
  series = {Conference proceedings : monday 24th to thursday 27th august 1992, Helsinki University of Technology, Espoo, Finland ; [the international conference and exhibition designed for the Microwave Community]. Vol. 2},
  journal   = {Conference proceedings : monday 24th to thursday 27th august 1992, Helsinki University of Technology, Espoo, Finland ; [the international conference and exhibition designed for the Microwave Community]. Vol. 2},
  publisher = {Microwave Exhibitions and Publishers},
  address   = {Tunbridge Wells},
  isbn      = {0-946821-77-1},
  pages     = {907 -- 912},
  year      = {1992},
  language  = {en}
}
@article{FerreinSchifferLakemeyer2008,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Lakemeyer, Gerhard},
  title     = {A Fuzzy Set Semantics for Qualitative Fluents in the Situation Calculus / Ferrein, Alexander ; Schiffer, Stefan ; Lakemeyer, Gerhard},
  series = {Intelligent Robotics and Applications : First International Conference, ICIRA 2008 Wuhan, China, October 15-17, 2008 Proceedings, Part I},
  journal   = {Intelligent Robotics and Applications : First International Conference, ICIRA 2008 Wuhan, China, October 15-17, 2008 Proceedings, Part I},
  publisher = {Springer},
  address   = {Berlin},
  pages     = {498 -- 509},
  year      = {2008},
  language  = {en}
}
@article{Hoettges1992,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {A Full Finite Element Solution for the Unsteady Advection-Diffusion Equation},
  series = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell},
  journal   = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell},
  publisher = {Computational Mechanics Publications [u.a.]},
  address   = {Southampton [u.a.]},
  isbn      = {185312169X},
  year      = {1992},
  language  = {en}
}
@inproceedings{Pietsch1995,
  author    = {Pietsch, Wolfram},
  title     = {A framework of quality function deployment},
  series = {Quality management / eds.: M. Ross ... (Software quality management ; 3,1)},
  booktitle = {Quality management / eds.: M. Ross ... (Software quality management ; 3,1)},
  publisher = {Computational Mechanics Publ.},
  address   = {Southhampton},
  organization    = {International Conference on Software Quality Management <3, 1995, Sevilla>},
  isbn      = {1-85312-309-9},
  pages     = {419 -- 428},
  year      = {1995},
  language  = {en}
}
@incollection{Pietsch2013,
  author    = {Pietsch, Wolfram},
  title     = {A framework for strategic positioning of IT-products},
  series = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)},
  booktitle = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-39336-5_11},
  pages     = {102 -- 116},
  year      = {2013},
  abstract  = {IT Products are viewed and managed differently depending on the perspectives and the stage within the life cycle. A model is presented that integrates different perspectives and stages serving as an aid for the analysis of business models and focused positioning of IT-products. Four generic business models are analysed with regard to the product management function in general and the positioning field for IT-products specifically: off-the-shelf (license), license plus service, project, and system service (incl. cloud computing).},
  language  = {en}
}
@article{StulpeHellwig1983,
  author    = {Stulpe, Werner and Hellwig, K.-E.},
  title     = {A Formulation of Quantum Stochastic Processes and Some of its Properties. Hellwig, K.-E.; Stulpe, W.},
  series = {Foundations of Physics. 13 (1983), H. 7},
  journal   = {Foundations of Physics. 13 (1983), H. 7},
  isbn      = {1572-9516},
  pages     = {673 -- 699},
  year      = {1983},
  language  = {en}
}
@inproceedings{GoemmelButenwegKob2007,
  author    = {G{\"o}mmel, A. and Butenweg, Christoph and Kob, M.},
  title     = {A fluid-structure interaction model of vocal fold oscillation},
  series = {5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007},
  booktitle = {5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007},
  isbn      = {978-888453674-7},
  pages     = {127 -- 128},
  year      = {2007},
  abstract  = {Since fluid-structure interaction within the finite-element method is state of the art in many engineering fields, this method is used in voice analysis. A quasi two-dimensional model of the vocal folds including the ventricular folds is presented. First results of self-sustained vocal fold oscillation are presented and possibilities as well as limitations are discussed.},
  language  = {en}
}
@article{KosterScheidweilerTieves2016,
  author    = {Koster, Arie and Scheidweiler, Robert and Tieves, Martin},
  title     = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  series = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  journal   = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  doi       = {10.48550/arXiv.1607.08754},
  pages     = {1 -- 30},
  year      = {2016},
  abstract  = {An equitable graph coloring is a proper vertex coloring of a graph G where the sizes of the color classes differ by at most one. The equitable chromatic number is the smallest number k such that G admits such equitable k-coloring. We focus on enumerative algorithms for the computation of the equitable coloring number and propose a general scheme to derive pruning rules for them: We show how the extendability of a partial coloring into an equitable coloring can be modeled via network flows. Thus, we obtain pruning rules which can be checked via flow algorithms. Computational experiments show that the search tree of enumerative algorithms can be significantly reduced in size by these rules and, in most instances, such naive approach even yields a faster algorithm. Moreover, the stability, i.e., the number of solved instances within a given time limit, is greatly improved. Since the execution of flow algorithms at each node of a search tree is time consuming, we derive arithmetic pruning rules (generalized Hall-conditions) from the network model. Adding these rules to an enumerative algorithm yields an even larger runtime improvement.},
  language  = {en}
}
@article{SchiffelsSelmer2015,
  author    = {Schiffels, Johannes and Selmer, Thorsten},
  title     = {A flexible toolbox to study protein-assisted metalloenzyme assembly in vitro},
  series = {Biotechnology and Bioengineering},
  volume    = {112},
  journal   = {Biotechnology and Bioengineering},
  number    = {11},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1097-0290},
  doi       = {10.1002/bit.25658},
  pages     = {2360 -- 2372},
  year      = {2015},
  language  = {en}
}
@article{SchoeningKloockMourzinaetal.2002,
  author    = {Sch{\"o}ning, Michael Josef and Kloock, Joachim P. and Mourzina, Y. and Schubert, J.},
  title     = {A first step towards a microfabricated thin-film sensor array on the basis of chalcogenide glass materials},
  series = {Sensors. 2 (2002), H. 9},
  journal   = {Sensors. 2 (2002), H. 9},
  isbn      = {1424-8220},
  pages     = {356 -- 365},
  year      = {2002},
  language  = {en}
}
@inproceedings{KobButenweg2004,
  author    = {Kob, Malte and Butenweg, Christoph},
  title     = {A finite element model of the interaction between intra-and extralaryngeal muscles},
  series = {International Conference on Voice Physiology and Biomechanics, August 18-20, 2004, Marseille, France},
  booktitle = {International Conference on Voice Physiology and Biomechanics, August 18-20, 2004, Marseille, France},
  organization    = {International Conference on Voice Physiology and Biomechanics <2004, Marseille>},
  pages     = {1 -- 2},
  year      = {2004},
  language  = {en}
}
@inproceedings{Engels2013,
  author    = {Engels, Elmar},
  title     = {A field bus library for MATLAB based on open core engineering},
  series = {Proceedings to the 14th International Workshop on Research and Education in Mechatronics, REM 2013, Wien, 05.06.-06.06.2013.},
  booktitle = {Proceedings to the 14th International Workshop on Research and Education in Mechatronics, REM 2013, Wien, 05.06.-06.06.2013.},
  isbn      = {978-3-90275-907-8},
  year      = {2013},
  language  = {en}
}
@article{Helmig2015,
  author    = {Helmig, Ilka},
  title     = {A few (hi)stories about french illustration},
  series = {Slanted},
  journal   = {Slanted},
  number    = {25 (Paris)},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  issn      = {1867-6510},
  pages     = {210 -- 217},
  year      = {2015},
  language  = {en}
}
@article{Jacobs1994,
  author    = {Jacobs, Stephan},
  title     = {A Fault Diagnosis System Using Temporary Relations between Symptoms},
  series = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)},
  journal   = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)},
  publisher = {Physica-Verl.},
  address   = {Heidelberg},
  isbn      = {379080794X},
  pages     = {XXVI, 550 S : graph. Darst.},
  year      = {1994},
  language  = {en}
}
@article{WeberArentMuenchetal.2016,
  author    = {Weber, Tobias and Arent, Jan-Christoph and M{\"u}nch, Lukas and Duhovic, Miro and Balvers, Johannes M.},
  title     = {A fast method for the generation of boundary conditions for thermal autoclave simulation},
  series = {Composites Part A},
  volume    = {88},
  journal   = {Composites Part A},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-835X},
  doi       = {10.1016/j.compositesa.2016.05.036},
  pages     = {216 -- 225},
  year      = {2016},
  abstract  = {Manufacturing process simulation enables the evaluation and improvement of autoclave mold concepts early in the design phase. To achieve a high part quality at low cycle times, the thermal behavior of the autoclave mold can be investigated by means of simulations. Most challenging for such a simulation is the generation of necessary boundary conditions. Heat-up and temperature distribution in an autoclave mold are governed by flow phenomena, tooling material and shape, position within the autoclave, and the chosen autoclave cycle. This paper identifies and summarizes the most important factors influencing mold heat-up and how they can be introduced into a thermal simulation. Thermal measurements are used to quantify the impact of the various parameters. Finally, the gained knowledge is applied to develop a semi-empirical approach for boundary condition estimation that enables a simple and fast thermal simulation of the autoclave curing process with reasonably high accuracy for tooling optimization.},
  language  = {en}
}
@article{SchmitzRoetertPischinger1988,
  author    = {Schmitz, G{\"u}nter and Roetert, J. and Pischinger, M.},
  title     = {A Fast Intelligent VMEbus System for Combustion Analysis in Engines},
  series = {19th [nineteenth] International Symposium on Automotive Technology \& [and] Automation : with particular reference to cell control and quality management systems for the manufacturing industries; Monte Carlo, 24. - 28. October 1988.},
  journal   = {19th [nineteenth] International Symposium on Automotive Technology \& [and] Automation : with particular reference to cell control and quality management systems for the manufacturing industries; Monte Carlo, 24. - 28. October 1988.},
  publisher = {Automotive Automation Ltd},
  address   = {Croydon},
  isbn      = {0947719229},
  pages     = {381 -- 391},
  year      = {1988},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {A Fast and Robust Procedure for the Determination of the Scattering Parameters for Network Analyzer Calibration},
  address   = {Paris},
  pages     = {373 -- 374},
  year      = {1992},
  language  = {en}
}
@inproceedings{DuongStaat2014,
  author    = {Duong, Minh Tuan and Staat, Manfred},
  title     = {A face-based smoothed finite element method for hyperelastic models and tissue growth},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@article{Bernecker2010,
  author    = {Bernecker, Andreas},
  title     = {A European Private Company: Is Europe's single legal form for SMEs close to approval?},
  series = {Research Briefing},
  journal   = {Research Briefing},
  publisher = {Deutsche Bank Research},
  address   = {Frankfurt a. M.},
  issn      = {2193-5955},
  year      = {2010},
  abstract  = {This Research Briefing, issued in July 2010, concluded that: - Small and medium-sized enterprises (SMEs) in Europe have long called for a matching legal form valid across the EU (similar to that of the European company (SE) for large firms) - The main benefits would be the availability of uniform Europe-wide company structures, significant cost reductions for businesses and further integration of the internal market - Given the differing national views regarding the concrete features of the new legal form there is currently no sign of an agreement being reached at the European level in the short term; however, it is possible that progress will be made in negotiations during the year - The key issues being discussed in depth are company formation, transnationality and employee participation rights in the new European private company (SPE).},
  language  = {en}
}
@article{SchoeningKrauseBlocketal.2003,
  author    = {Sch{\"o}ning, Michael Josef and Krause, R. and Block, K. and Musahmeh, M. and Mulchandani, A. and Wang, J.},
  title     = {A dual amperometric/potentiometric FIA-based biosensor for the distinctive detection of organophosphorus pesticides},
  series = {Sensors and Actuators B. 95 (2003), H. 1-3},
  journal   = {Sensors and Actuators B. 95 (2003), H. 1-3},
  isbn      = {0925-4005},
  pages     = {291 -- 296},
  year      = {2003},
  language  = {en}
}
@article{SchoeningKrauseBlocketal.2002,
  author    = {Sch{\"o}ning, Michael Josef and Krause, R. and Block, K. and Musameh, M. and Mulchandani, A. and Wang, J.},
  title     = {A dual amperometric / potentiometric FIA-based biosensor for the distinctive detection of organophosphorus pesticides},
  series = {Book of abstracts / ed. by J. Saneistr.},
  journal   = {Book of abstracts / ed. by J. Saneistr.},
  publisher = {Czech Technical University, Faculty of Electrical Engineering, Department of Measurement},
  address   = {Prague},
  isbn      = {80-01-02576-4},
  pages     = {76 -- 79},
  year      = {2002},
  language  = {en}
}
@article{OehlschlaegerOsenPeileretal.2001,
  author    = {{\"O}hlschl{\"a}ger, Peter and Osen, Wolfram and Peiler, Tanja and Caldeira, Sandra},
  title     = {A DNA vaccine based on a shuffled E7 oncogene of the human papillomavirus type 16 (HPV 16) induces E7-specific cytotoxic T cells but lacks transforming activity / Osen, Wolfram ; Peiler, Tanja ; {\"O}hlschl{\"a}ger, Peter ; Caldeira, Sandra ; Faath, Stefan ; Mich},
  series = {Vaccine. 19 (2001), H. 20},
  journal   = {Vaccine. 19 (2001), H. 20},
  isbn      = {0264-410X},
  pages     = {4276 -- 4286},
  year      = {2001},
  language  = {en}
}
@article{SildatkeKarwanniKraftetal.2023,
  author    = {Sildatke, Michael and Karwanni, Hendrik and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {A distributed microservice architecture pattern for the automated generation of information extraction pipelines},
  series = {SN Computer Science},
  journal   = {SN Computer Science},
  number    = {4, Article number: 833},
  publisher = {Springer Singapore},
  address   = {Singapore},
  issn      = {2661-8907},
  doi       = {10.1007/s42979-023-02256-4},
  pages     = {19 Seiten},
  year      = {2023},
  abstract  = {Companies often build their businesses based on product information and therefore try to automate the process of information extraction (IE). Since the information source is usually heterogeneous and non-standardized, classic extract, transform, load techniques reach their limits. Hence, companies must implement the newest findings from research to tackle the challenges of process automation. They require a flexible and robust system that is extendable and ensures the optimal processing of the different document types. This paper provides a distributed microservice architecture pattern that enables the automated generation of IE pipelines. Since their optimal design is individual for each input document, the system ensures the ad-hoc generation of pipelines depending on specific document characteristics at runtime. Furthermore, it introduces the automated quality determination of each available pipeline and controls the integration of new microservices based on their impact on the business value. The introduced system enables fast prototyping of the newest approaches from research and supports companies in automating their IE processes. Based on the automated quality determination, it ensures that the generated pipelines always meet defined business requirements when they come into productive use.},
  language  = {en}
}
@article{SanderFosterRoyetal.2000,
  author    = {Sander, Volker and Foster, Ian and Roy, Alain and Winkler, Linda},
  title     = {A differentiated services implementation for high-performance TCP flows},
  series = {Computer Networks. 34 (2000), H. 6},
  journal   = {Computer Networks. 34 (2000), H. 6},
  isbn      = {1389-1286},
  pages     = {915 -- 929},
  year      = {2000},
  language  = {en}
}
@inproceedings{WalentaSchellekensFerreinetal.2017,
  author    = {Walenta, Robert and Schellekens, Twan and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A decentralised system approach for controlling AGVs with ROS},
  series = {AFRICON, Proceedings},
  booktitle = {AFRICON, Proceedings},
  publisher = {IEEE},
  isbn      = {978-1-5386-2775-4},
  issn      = {2153-0033},
  doi       = {10.1109/AFRCON.2017.8095693},
  pages     = {1436 -- 1441},
  year      = {2017},
  language  = {en}
}
@article{Harder1999,
  author    = {Harder, J{\"o}rn},
  title     = {A crystallographic model for the study of local deformation processes in polycrystals},
  series = {International journal of plasticity. 15 (1999), H. 6},
  journal   = {International journal of plasticity. 15 (1999), H. 6},
  isbn      = {0749-6419},
  pages     = {605 -- 624},
  year      = {1999},
  language  = {en}
}