@incollection{MeskourisButenweg2008, author = {Meskouris, Konstantin and Butenweg, Christoph}, title = {Erdbebensichere Auslegung von Bauwerken nach DIN 4149:2005}, series = {Betonkalender 2008: Konstruktiver Wasserbau, erdbebensicheres Bauen. Band 2}, booktitle = {Betonkalender 2008: Konstruktiver Wasserbau, erdbebensicheres Bauen. Band 2}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {978-3-433-01839-2 (Print) ; 978-3-433-01854-5 (E-Book)}, doi = {10.1002/9783433600702.ch5}, pages = {1 -- 54}, year = {2008}, language = {de} } @incollection{ButenwegGellert2007, author = {Butenweg, Christoph and Gellert, Christoph}, title = {Berechnung und Bemessung von durch Erdbeben beanspruchten Mauerwerksbauten nach DIN 4149 (04.2005)}, series = {Mauerwerksbau-Praxis / Schubert ; Schneider ; Schoch (Hrsg.)}, booktitle = {Mauerwerksbau-Praxis / Schubert ; Schneider ; Schoch (Hrsg.)}, publisher = {Werner Verlag}, address = {Berlin}, isbn = {3-9343-6938-3 ; 978-3-9343-6938-2}, pages = {363 -- 393}, year = {2007}, language = {de} } @incollection{MeskourisButenwegKalkeretal.2007, author = {Meskouris, Konstantin and Butenweg, Christoph and Kalker, Ines and Mistler, Michael}, title = {Numerical simulation of historic masonry buildings}, series = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)}, booktitle = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)}, publisher = {Franz Steiner Verlag}, address = {Stuttgart}, isbn = {978-3-515-09030-8 ; 3-515-09030-4}, pages = {171 -- 189}, year = {2007}, language = {en} } @incollection{KuhlmannBettziecheRoesleretal.2005, author = {Kuhlmann, W. and Bettzieche, V. and Roesler, F. and Butenweg, Christoph and K{\"o}nke, C. and Meskouris, Konstantin}, title = {Baudynamische Untersuchung von Talsperren des Ruhrverbandes}, series = {Neubewertung der Erdbebensicherheit von Talsperren in Deutschland : DGEB-Workshop, 28. November 2003 in Potsdam = Assessment of the seismic safety of dams in Germany / organisiert von der Deutschen Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik. K. Meskouris ... (Hrsg.) (DGEB-Publikation ; Nr. 12)}, booktitle = {Neubewertung der Erdbebensicherheit von Talsperren in Deutschland : DGEB-Workshop, 28. November 2003 in Potsdam = Assessment of the seismic safety of dams in Germany / organisiert von der Deutschen Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik. K. Meskouris ... (Hrsg.) (DGEB-Publikation ; Nr. 12)}, publisher = {DGEB}, address = {Aachen}, isbn = {3-930108-08-9}, pages = {37 -- 48}, year = {2005}, language = {de} } @incollection{ButenwegGellertMeyer2010, author = {Butenweg, Christoph and Gellert, Christoph and Meyer, Udo}, title = {Erdbebenbemessung bei Mauerwerksbauten}, series = {Mauerwerk-Kalender 2010: Normen f{\"u}r Bemessung und Ausf{\"u}hrung}, booktitle = {Mauerwerk-Kalender 2010: Normen f{\"u}r Bemessung und Ausf{\"u}hrung}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {3-433-60040-6 ; 978-3-433-60040-5}, doi = {10.1002/9783433600405.ch7}, pages = {141 -- 167}, year = {2010}, language = {de} } @incollection{ButenwegRoeser2012, author = {Butenweg, Christoph and Roeser, W.}, title = {Erdbebenbemessung von Stahlbetontragwerken nach DIN EN 1998-1}, series = {Stahlbetonbau aktuell : Praxishandbuch}, booktitle = {Stahlbetonbau aktuell : Praxishandbuch}, publisher = {Beuth}, address = {Berlin}, isbn = {978-3-410-21932-3 (Print) ; 978-341-02193-3-0 (E-Book)}, pages = {A.1 -- A.43}, year = {2012}, language = {de} } @incollection{KuhlmannButenwegMeskourisetal.2012, author = {Kuhlmann, Wolfram and Butenweg, Christoph and Meskouris, Konstantin and Kempen, Thomas}, title = {Simulation des Tragverhaltens des Aachener Doms im Erdbebenfall}, series = {Die karolingische Pfalzkapelle in Aachen : Material, Bautechnik, Restaurierung. (Arbeitshefte der rheinischen Denkmalpflege ; 78)}, booktitle = {Die karolingische Pfalzkapelle in Aachen : Material, Bautechnik, Restaurierung. (Arbeitshefte der rheinischen Denkmalpflege ; 78)}, publisher = {Wernersche Verlags-Gesellschaft}, address = {Worms}, isbn = {978-3-88462-325-1}, pages = {237 -- 248}, year = {2012}, language = {de} } @incollection{ButenwegNorda2014, author = {Butenweg, Christoph and Norda, H.}, title = {Erdbebenberechnung von Mauerwerksbauten nach DIN EN 1998-1:2010-12}, series = {Mauerwerksbau-Praxis nach Eurocode / Schubert, Schneider, Schoch (Hrsg.). - 3., vollst{\"a}ndig {\"u}berarbeitete Auflage}, booktitle = {Mauerwerksbau-Praxis nach Eurocode / Schubert, Schneider, Schoch (Hrsg.). - 3., vollst{\"a}ndig {\"u}berarbeitete Auflage}, publisher = {Beuth}, address = {Berlin, Wien, Z{\"u}rich}, isbn = {978-3-410-22739-7}, pages = {367 -- 412}, year = {2014}, language = {de} } @incollection{ButenwegGellert2009, author = {Butenweg, Christoph and Gellert, Christoph}, title = {Erdbebenberechnung von Mauerwerksbauten nach DIN EN 1998-1 (12.2010)}, series = {Mauerwerksbau-Praxis / Schubert; Schneider; Schoch (Hrsg.)}, booktitle = {Mauerwerksbau-Praxis / Schubert; Schneider; Schoch (Hrsg.)}, publisher = {Bauwerk}, address = {Berlin}, isbn = {978-3-89932-217-0}, pages = {299 -- 343}, year = {2009}, language = {de} } @incollection{FissabreWilson2016, author = {Fissabre, Anke and Wilson, Ariane}, title = {"Lehmbaupropaganda" : On the tradition of earth building literature}, series = {Earth Construction and Tradition. Vol. I}, booktitle = {Earth Construction and Tradition. Vol. I}, editor = {Feiglstorfer, Hubert}, publisher = {IVA Institut f{\"u}r vergleichende Architekturforschung}, address = {Wien}, isbn = {978-3-900265-34-2}, pages = {47 -- 69}, year = {2016}, language = {en} } @incollection{ButenwegKlinkel2014, author = {Butenweg, Christoph and Klinkel, Sven}, title = {Dynamisches Verhalten von Stahlbetonplatten unter Impact-Belastungen}, series = {Massivbau im Wandel : Festschrift zum 60. Geburtstag von Josef Hegger}, booktitle = {Massivbau im Wandel : Festschrift zum 60. Geburtstag von Josef Hegger}, publisher = {Ernst}, address = {Berlin}, isbn = {3-939051-20-9}, pages = {369 -- 380}, year = {2014}, language = {de} } @incollection{MeskourisNordaButenweg2011, author = {Meskouris, Konstantin and Norda, Hannah and Butenweg, Christoph}, title = {Aktuelle Nachweiskonzepte von Mauerwerk unter Erdbebenbeanspruchung}, series = {Wie wollen wir in Zukunft bauen? : Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. Wolfram J{\"a}ger, Dresden, 19.04.2011. (Bauforschung und Baupraxis ; H. 10)}, booktitle = {Wie wollen wir in Zukunft bauen? : Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. Wolfram J{\"a}ger, Dresden, 19.04.2011. (Bauforschung und Baupraxis ; H. 10)}, publisher = {Techn. Univ., Lehrstuhl Tragwerksplanung}, address = {Dresden}, isbn = {978-3-86780-216-1}, pages = {233 -- 238}, year = {2011}, language = {de} } @incollection{MeskourisGellertButenweg2010, author = {Meskouris, Konstantin and Gellert, Christoph and Butenweg, Christoph}, title = {Neuer Ansatz f{\"u}r die Bemessung von Mauerwerksbauten}, series = {Innovationen im konstruktiven Ingenieurbau : Methoden - Materialien - Bauwerke ; Festschrift Professor Hirschfeld / hrsg. von Karl Beucke}, booktitle = {Innovationen im konstruktiven Ingenieurbau : Methoden - Materialien - Bauwerke ; Festschrift Professor Hirschfeld / hrsg. von Karl Beucke}, publisher = {Bauhaus-Univ. Weimar}, address = {Weimar}, pages = {217 -- 224}, year = {2010}, language = {de} } @incollection{MeskourisHoltschoppenButenwegetal.2010, author = {Meskouris, Konstantin and Holtschoppen, Britta and Butenweg, Christoph and Park, Jin}, title = {Seismische Auslegung von Silo- und Tankbauwerken}, series = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem konstruktiven Ingenieurbau ; 2010,6)}, booktitle = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem konstruktiven Ingenieurbau ; 2010,6)}, publisher = {Univ. der Bundeswehr}, address = {Neubiberg}, pages = {215 -- 224}, year = {2010}, language = {de} } @incollection{PuliniGligorevic2009, author = {Pulini, Paola and Gligorevic, Snjezana}, title = {WIMAX performance in the airport environment}, series = {Multi-carrier systems \& solutions 2009. (Lecture notes in electrical engineering ; 41)}, booktitle = {Multi-carrier systems \& solutions 2009. (Lecture notes in electrical engineering ; 41)}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-90-481-2529-6 (Print) ; 978-90-481-2530-2 (Online)}, pages = {301 -- 310}, year = {2009}, abstract = {In this paper, the multicarrier physical layers of WiMAX are evaluated in the context of airport data links. The orthogonal frequency-division multiplexing (OFDM) and orthogonal frequency-division multiple-access (OFDMA) cases are applied to the forward link (FL) and reverse link (RL), respectively. The performance of the so called parking and taxi scenarios is presented for airport communications in C-band. Numerical results show that the proposed scheme brings good performance for both the FL and the RL. For the OFDMA case a structure changing called double-tile is also proposed to improve the system performance.}, language = {en} } @incollection{WolffSeefeldtBaueretal.2014, author = {Wolff, Nino and Seefeldt, Patric and Bauer, Wolfgang and Fiebig, Christopher and Gerding, Patrick and Parow-Souchon, Kai and Pongs, Anna and Reiffenrath, Matti and Ziemann, Thomas}, title = {Alternative application of solar sail technology}, series = {Advances in solar sailing}, booktitle = {Advances in solar sailing}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)}, doi = {10.1007/978-3-642-34907-2_23}, pages = {351 -- 365}, year = {2014}, abstract = {The development of Gossamer sail structures for solar sails contributes to a large field of future space applications like thin film solar generators, membrane antennas and drag sails. The focus of this paper is the development of a drag sail based on solar sail technology that could contribute to a reduction of space debris in low Earth orbits. The drag sail design and its connections to solar sail development, a first test on a sounding rocket, as well as the ongoing integration of the drag sail into a triple CubeSat is presented.}, language = {en} } @incollection{DachwaldBoehnhardtBrojetal.2014, author = {Dachwald, Bernd and Boehnhardt, Herrmann and Broj, Ulrich and Geppert, Ulrich R. M. E. and Grundmann, Jan-Thimo and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Johnson, Les and K{\"u}hrt, Ekkehard and Mottola, Stefano and Macdonald, Malcolm and McInnes, Colin R. and Vasile, Massimiliano and Reinhard, Ruedeger}, title = {Gossamer roadmap technology reference study for a multiple NEO Rendezvous Mission}, series = {Advances in solar sailing}, booktitle = {Advances in solar sailing}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)}, pages = {211 -- 226}, year = {2014}, abstract = {A technology reference study for a multiple near-Earth object (NEO) rendezvous mission with solar sailcraft is currently carried out by the authors of this paper. The investigated mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy based on the DLR/ESA Gossamer technology. The main scientific objective of the mission is to explore the diversity of NEOs. After direct interplanetary insertion, the solar sailcraft should—within less than 10 years—rendezvous three NEOs that are not only scientifically interesting, but also from the point of human spaceight and planetary defense. In this paper, the objectives of the study are outlined and a preliminary potential mission profile is presented.}, language = {en} } @incollection{McInnesBothmerDachwaldetal.2014, author = {McInnes, Colin R. and Bothmer, Volker and Dachwald, Bernd and Geppert, Ulrich R. M. E. and Heiligers, Jeannette and Hilgers, Alan and Johnson, Les and Macdonald, Malcolm and Reinhard, Ruedeger and Seboldt, Wolfgang and Spietz, Peter}, title = {Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission}, series = {Advances in solar sailing}, booktitle = {Advances in solar sailing}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)}, pages = {227 -- 242}, year = {2014}, abstract = {A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.}, language = {en} } @incollection{MacdonaldMcGrathAppourchauxetal.2014, author = {Macdonald, Malcolm and McGrath, C. and Appourchaux, T. and Dachwald, Bernd and Finsterle, W. and Gizon, L. and Liewer, P. C. and McInnes, Colin R. and Mengali, G. and Seboldt, W. and Sekii, T. and Solanki, S. K. and Velli, M. and Wimmer-Schweingruber, R. F. and Spietz, Peter and Reinhard, Ruedeger}, title = {Gossamer roadmap technology reference study for a solar polar mission}, series = {Advances in solar sailing}, booktitle = {Advances in solar sailing}, editor = {Macdonald, Malcolm}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-642-34906-5}, doi = {10.1007/978-3-642-34907-2_17}, pages = {243 -- 257}, year = {2014}, abstract = {A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100-125 m to deliver a 'sufficient value' minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.}, language = {en} } @incollection{PriedeFerrein2013, author = {Priede, Gareth and Ferrein, Alexander}, title = {Towards passive walking for the fully-actuated biped robot Nao}, series = {Emerging trends in computing, informatics, systems sciences, and engineering. (Lecture notes in electrical engineering : vol. 151)}, booktitle = {Emerging trends in computing, informatics, systems sciences, and engineering. (Lecture notes in electrical engineering : vol. 151)}, publisher = {Springer}, address = {New York, NY}, isbn = {978-1-4614-3557-0 ; 978-1-4614-3558-7}, doi = {10.1007/978-1-4614-3558-7_18}, pages = {225 -- 236}, year = {2013}, abstract = {Many biped robots deploy a form of gait that follows the zero moment point (ZMP) approach, that is, the robot is in a stable position at any point in time. This requires the robot to be fully actuated. While very stable, the draw-backs of this approach are a fairly slow gait and high energy consumption. An alternative approach is the so-called passive-dynamic walking, where the gait makes use of the inertia and dynamic stability of the robot. In this paper we describe our ongoing work of combining the principles of passive-dynamic walking on the fully-actuated biped robot Nao, which is also deployed for robotic soccer applications. We present a simple controller that allows the robot to stably rock sidewards, showing a closed limit-cycle. We discuss first results of superimposing a forward motion on the sidewards motion. Based on this we expect to endow the Nao with a fast, robust, and stable passive-dynamic walk on the fully-actuated Nao in the future.}, language = {en} } @incollection{GligorevicEppleSchnell2011, author = {Gligorevic, Snjezana and Epple, Ulrich and Schnell, Michael}, title = {The LDACS1 physical layer design}, series = {Future aeronautical communications}, booktitle = {Future aeronautical communications}, publisher = {Intech}, address = {London}, isbn = {978-953-307-625-6}, pages = {317 -- 332}, year = {2011}, language = {en} } @incollection{Timme2014, author = {Timme, Michael}, title = {Begriffsbestimmungen}, series = {Wohnungseigentumsgesetz : Gesetz {\"u}ber das Wohnungseigentum und das Dauerwohnrecht ; Kommentar}, booktitle = {Wohnungseigentumsgesetz : Gesetz {\"u}ber das Wohnungseigentum und das Dauerwohnrecht ; Kommentar}, edition = {2. Auflage}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-66025-2}, pages = {1 -- 23}, year = {2014}, language = {de} } @incollection{KirchnerReisertSchoening2014, author = {Kirchner, Patrick and Reisert, Steffen and Sch{\"o}ning, Michael Josef}, title = {Calorimetric gas sensors for hydrogen peroxide monitoring in aseptic food processes}, series = {Gas sensing fundamentals. (Springer Series on Chemical Sensors and Biosensors ; 15)}, booktitle = {Gas sensing fundamentals. (Springer Series on Chemical Sensors and Biosensors ; 15)}, publisher = {Springer}, address = {Heidelberg}, isbn = {978-3-642-54518-4 (Print) ; 978-3-642-54519-1 (Online)}, doi = {10.1007/5346_2013_51}, pages = {279 -- 309}, year = {2014}, abstract = {For the sterilisation of aseptic food packages it is taken advantage of the microbicidal properties of hydrogen peroxide (H2O2). Especially, when applied in vapour phase, it has shown high potential of microbial inactivation. In addition, it offers a high environmental compatibility compared to other chemical sterilisation agents, as it decomposes into oxygen and water, respectively. Due to a lack in sensory detection possibilities, a continuous monitoring of the H2O2 concentration was recently not available. Instead, the sterilisation efficacy is validated using microbiological tests. However, progresses in the development of calorimetric gas sensors during the last 7 years have made it possible to monitor the H2O2 concentration during operation. This chapter deals with the fundamentals of calorimetric gas sensing with special focus on the detection of gaseous hydrogen peroxide. A sensor principle based on a calorimetric differential set-up is described. Special emphasis is given to the sensor design with respect to the operational requirements under field conditions. The state-of-the-art regarding a sensor set-up for the on-line monitoring and secondly, a miniaturised sensor for in-line monitoring are summarised. Furthermore, alternative detection methods and a novel multi-sensor system for the characterisation of aseptic sterilisation processes are described.}, language = {en} } @incollection{SchoeningPoghossianGluecketal.2014, author = {Sch{\"o}ning, Michael Josef and Poghossian, Arshak and Gl{\"u}ck, Olaf and Thust, Marion}, title = {Electrochemical methods for the determination of chemical variables in aqueous media}, series = {Measurement, instrumentation, and sensors handbook / ed. by John G. Webster [u.a.] Vol. 2 : Electromagnetic, optical, radiation, chemical, and biomedical measurement}, booktitle = {Measurement, instrumentation, and sensors handbook / ed. by John G. Webster [u.a.] Vol. 2 : Electromagnetic, optical, radiation, chemical, and biomedical measurement}, publisher = {CRC Pr.}, address = {Boca Raton, Fla.}, isbn = {978-1-4398-4891-3}, pages = {55-1 -- 55-54}, year = {2014}, language = {en} } @incollection{FrotscherGossmannRaatschenetal.2015, author = {Frotscher, Ralf and Goßmann, Matthias and Raatschen, Hans-J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred}, title = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM}, series = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)}, booktitle = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)}, publisher = {Springer}, address = {Heidelberg}, isbn = {978-3-319-02534-6 ; 978-3-319-02535-3}, pages = {187 -- 212}, year = {2015}, abstract = {We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.}, language = {en} } @incollection{Pietsch2013, author = {Pietsch, Wolfram}, title = {A framework for strategic positioning of IT-products}, series = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)}, booktitle = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)}, publisher = {Springer}, address = {Berlin}, doi = {10.1007/978-3-642-39336-5_11}, pages = {102 -- 116}, year = {2013}, abstract = {IT Products are viewed and managed differently depending on the perspectives and the stage within the life cycle. A model is presented that integrates different perspectives and stages serving as an aid for the analysis of business models and focused positioning of IT-products. Four generic business models are analysed with regard to the product management function in general and the positioning field for IT-products specifically: off-the-shelf (license), license plus service, project, and system service (incl. cloud computing).}, language = {en} } @incollection{NiemuellerEwertReuteretal.2014, author = {Niem{\"u}ller, Tim and Ewert, Daniel and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard}, title = {RoboCup logistics league sponsored by festo: A competitive factory automation testbed}, series = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)}, booktitle = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)}, publisher = {Springer}, address = {Berlin}, organization = {RoboCup International Symposium <17, 2013, Eindhoven>}, isbn = {978-3-662-44467-2 (Print) 978-3-662-44468-9 (Online)}, pages = {336 -- 347}, year = {2014}, abstract = {A new trend in automation is to deploy so-called cyber-physical systems (CPS) which combine computation with physical processes. The novel RoboCup Logistics League Sponsored by Festo (LLSF) aims at such CPS logistic scenarios in an automation setting. A team of robots has to produce products from a number of semi-finished products which they have to machine during the game. Different production plans are possible and the robots need to recycle scrap byproducts. This way, the LLSF is a very interesting league offering a number of challenging research questions for planning, coordination, or communication in an application-driven scenario. In this paper, we outline the objectives of the LLSF and present steps for developing the league further towards a benchmark for logistics scenarios for CPS. As a major milestone we present the new automated referee system which helps in governing the game play as well as keeping track of the scored points in a very complex factory scenario.}, language = {en} } @incollection{KnottSofroniaGerressenetal.2014, author = {Knott, Thomas C. and Sofronia, Raluca E. and Gerressen, Marcus and Law, Yuen and Davidescu, Arjana and Savii, George G. and Gatzweiler, Karl-Heinz and Staat, Manfred and Kuhlen, Torsten W.}, title = {Preliminary bone sawing model for a virtual reality-based training simulator of bilateral sagittal split osteotomy}, series = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)}, booktitle = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-12057-7 (Online)}, doi = {10.1007/978-3-319-12057-7_1}, pages = {1 -- 10}, year = {2014}, abstract = {Successful bone sawing requires a high level of skill and experience, which could be gained by the use of Virtual Reality-based simulators. A key aspect of these medical simulators is realistic force feedback. The aim of this paper is to model the bone sawing process in order to develop a valid training simulator for the bilateral sagittal split osteotomy, the most often applied corrective surgery in case of a malposition of the mandible. Bone samples from a human cadaveric mandible were tested using a designed experimental system. Image processing and statistical analysis were used for the selection of four models for the bone sawing process. The results revealed a polynomial dependency between the material removal rate and the applied force. Differences between the three segments of the osteotomy line and between the cortical and cancellous bone were highlighted.}, language = {en} } @incollection{Krause2001, author = {Krause, Gregor}, title = {Brenchmarking elektrischer Energie in Zweckbauten - Aussagef{\"a}higkeit von Energiekennzahlen}, series = {Betriebliches Energiemanagement : Tagung Cottbus, 6. und 7. M{\"a}rz 2001. (VDI-Berichte ; 1593)}, booktitle = {Betriebliches Energiemanagement : Tagung Cottbus, 6. und 7. M{\"a}rz 2001. (VDI-Berichte ; 1593)}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, isbn = {3180915935}, pages = {413 -- 422}, year = {2001}, language = {de} } @incollection{BagayokoGeisslerKoch2012, author = {Bagayoko, Lamine and Geissler, Karsten and Koch, Eckart}, title = {Dynamik bei Eisenbahnbr{\"u}cken}, series = {Stahlbau-Kalender : [Eurocode-3-Grundnorm; Br{\"u}cken] ; Jg. 14 / hrsg. von Ulrike Kuhlmann}, booktitle = {Stahlbau-Kalender : [Eurocode-3-Grundnorm; Br{\"u}cken] ; Jg. 14 / hrsg. von Ulrike Kuhlmann}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {978-3-433-02988-6}, pages = {575 -- 632}, year = {2012}, language = {de} } @incollection{AlhwarinFerreinScholl2014, author = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid}, title = {IR stereo kinect: improving depth images by combining structured light with IR stereo}, series = {PRICAI 2014: Trends in artificial intelligence : 13th Pacific Rim International Conference on Artificial Intelligence : Gold Coast, QLD, Australia, December 1-5, 2014 : proceedings. (Lecture notes in computer science ; vol. 8862)}, booktitle = {PRICAI 2014: Trends in artificial intelligence : 13th Pacific Rim International Conference on Artificial Intelligence : Gold Coast, QLD, Australia, December 1-5, 2014 : proceedings. (Lecture notes in computer science ; vol. 8862)}, publisher = {Springer}, address = {M{\"u}nchen}, isbn = {978-3-319-13559-5 (Print) ; 978-3-319-13560-1 (E-Book)}, doi = {10.1007/978-3-319-13560-1_33}, pages = {409 -- 421}, year = {2014}, abstract = {RGB-D sensors such as the Microsoft Kinect or the Asus Xtion are inexpensive 3D sensors. A depth image is computed by calculating the distortion of a known infrared light (IR) pattern which is projected into the scene. While these sensors are great devices they have some limitations. The distance they can measure is limited and they suffer from reflection problems on transparent, shiny, or very matte and absorbing objects. If more than one RGB-D camera is used the IR patterns interfere with each other. This results in a massive loss of depth information. In this paper, we present a simple and powerful method to overcome these problems. We propose a stereo RGB-D camera system which uses the pros of RGB-D cameras and combine them with the pros of stereo camera systems. The idea is to utilize the IR images of each two sensors as a stereo pair to generate a depth map. The IR patterns emitted by IR projectors are exploited here to enhance the dense stereo matching even if the observed objects or surfaces are texture-less or transparent. The resulting disparity map is then fused with the depth map offered by the RGB-D sensor to fill the regions and the holes that appear because of interference, or due to transparent or reflective objects. Our results show that the density of depth information is increased especially for transparent, shiny or matte objects.}, language = {en} } @incollection{TranStaat2015, author = {Tran, Thanh Ngoc and Staat, Manfred}, title = {Uncertainty multimode failure and shakedown analysis of shells}, series = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...}, booktitle = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)}, doi = {10.1007/978-3-319-12928-0_14}, pages = {279 -- 298}, year = {2015}, abstract = {This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.}, language = {en} } @incollection{Hebel2014, author = {Hebel, Christoph}, title = {Mehrwert}, series = {Unser Dorf hat Zukunft}, booktitle = {Unser Dorf hat Zukunft}, publisher = {St{\"a}dteRegion Aachen}, address = {Aachen}, pages = {6 -- 7}, year = {2014}, language = {de} } @incollection{Benner2014, author = {Benner, Joachim}, title = {Berechnungsmethoden der W{\"a}lzlagerreibung und Einflussgr{\"o}ßen}, series = {SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014}, booktitle = {SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014}, publisher = {TUDpress Verl. der Wissenschaften}, address = {Dresden}, isbn = {978-3-944331-81-2}, pages = {151 -- 170}, year = {2014}, language = {de} } @incollection{Wollert2006, author = {Wollert, J{\"o}rg}, title = {Bussysteme}, series = {Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-J{\"u}rgen Gevatter ... (Hrsg.). - 2. Aufl.}, booktitle = {Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-J{\"u}rgen Gevatter ... (Hrsg.). - 2. Aufl.}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-21207-8 ; 978-3-540-21207-2}, pages = {475 -- 653}, year = {2006}, language = {de} } @incollection{Pietsch1990, author = {Pietsch, Wolfram}, title = {Flexibilisierung des betrieblichen Software-Projektmanagements}, series = {Beitr{\"a}ge zum Projektmanagement-Forum 90 : vom 19. - 21. September 1990 in Aachen}, booktitle = {Beitr{\"a}ge zum Projektmanagement-Forum 90 : vom 19. - 21. September 1990 in Aachen}, publisher = {Gesellschaft f{\"u}r Projektmanagement INTERNET Deutschland e.V.}, address = {M{\"u}nchen}, organization = {Projektmanagement-Forum <1990, Aachen>}, isbn = {3-924841-10-1}, pages = {345 -- 355}, year = {1990}, language = {de} } @incollection{KurbelPietsch1989, author = {Kurbel, Karl and Pietsch, Wolfram}, title = {Projektmanagementebenen bei evolution{\"a}rer Softwareentwicklung}, series = {Interaktive betriebswirtschaftliche Informations- und Steuerungssysteme}, booktitle = {Interaktive betriebswirtschaftliche Informations- und Steuerungssysteme}, editor = {Kurbel, Karl and Mertens, Peter and Scheer, August W.}, publisher = {De Gruyter}, address = {Berlin}, isbn = {3-11-012100-X}, doi = {10.1515/9783110847055-013}, pages = {261 -- 285}, year = {1989}, language = {de} } @incollection{Wollert2005, author = {Wollert, J{\"o}rg}, title = {Was der Einsatz von Funktechnik bringt : Wireless-Technologie in der Automation will besonnen geplant werden}, series = {Visions of automation - Blick in die Zukunft der Automatisierung ; Vol. deutsch/englisch}, booktitle = {Visions of automation - Blick in die Zukunft der Automatisierung ; Vol. deutsch/englisch}, publisher = {Heinrich Vogel Verlag}, address = {M{\"u}nchen}, isbn = {978-3-8259-1934-4}, pages = {18 -- 23}, year = {2005}, language = {de} } @incollection{Pietsch1998, author = {Pietsch, Wolfram}, title = {Kundenorientiertes Softwareprozeßmanagement}, series = {Information management for business and competitive intelligence and excellence: Proceedings der Fr{\"u}hjahrstagung Wirtschaftsinformatik '98}, booktitle = {Information management for business and competitive intelligence and excellence: Proceedings der Fr{\"u}hjahrstagung Wirtschaftsinformatik '98}, editor = {Hummeltenberg, Wilhelm}, publisher = {Vieweg+Teubner Verlag}, address = {Wiesbaden}, isbn = {978-3-528-05678-0 (Print)}, doi = {10.1007/978-3-322-84950-2_22}, pages = {301 -- 311}, year = {1998}, abstract = {In der betrieblichen Entwicklungspraxis klaffen Anspruch und Realit{\"a}t bei der Gestaltung betrieblicher Softwareentwicklungsprozesse auseinander. Nicht selten werden „Vorgehensmodelle"definiert, jedoch nicht konsequent oder nicht mit dem erw{\"u}nschten Erfolg eingesetzt. Die Modellierung der Entwicklungsabl{\"a}ufe garantiert nicht deren effektive und effiziente Umsetzung; dazu ist ein „Prozeßmanagement"erforderlich. Die verf{\"u}gbaren Prozeßmanagementans{\"a}tze eignen sich f{\"u}r unterschiedliche Anwendungsfelder und Organisationskulturen, sind dementsprechend auch auf die Softwareentwicklung {\"u}bertragbar, adressieren jedoch nur bedingt den zentralen Erfolgsfaktor betrieblicher Softwareentwicklung: die Zufriedenheit der Anwender als Kunden der Softwareentwicklung. Der Schl{\"u}ssel f{\"u}r erfolgreiche Softwareentwicklungsprozesse liegt nicht im Prozeßmanagement allein, sondern in dessen Ausgestaltung mit Blick auf den Kunden. Ansatzpunkte f{\"u}r ein kundenorientiertes Softwareprozeßmanagement sind die Etablierung einer Kunden/Lieferantenbeziehung, die Fokussierung und Differenzierung der Entwicklungsprozesse, die Benutzerinvolvierung, Simultaneous Engineering und die gezielte Identifikation, Integration und Kooperation der „Stimme des Kunden"und der „Stimme des Ingenieurs". Die Bewertung kundenorientierter Softwareprozesse wird diskutiert und Schlußfolgerungen f{\"u}r Forschung und Praxis skizziert.}, language = {de} } @incollection{PietschSiedentopfTeubner1992, author = {Pietsch, Wolfram and Siedentopf, Jukka and Teubner, Alexander}, title = {Vergleich konnektionistischer Modelle und konventioneller Optimierungsverfahren am Beispiel der Maschinenbelegungsplanung}, series = {Operations Research Proceedings 1991 / Papers of the 20th Annual Meeting = Vortr{\"a}ge der 20. Jahrestagung}, booktitle = {Operations Research Proceedings 1991 / Papers of the 20th Annual Meeting = Vortr{\"a}ge der 20. Jahrestagung}, editor = {Gaul, Wolfgang and Bachem, Achim and Habenicht, Walter and Runge, Walter and Stahl, Wolfgang W.}, publisher = {Springer}, address = {Berlin ; Heidelberg}, isbn = {978-3-642-46773-8 (Online)}, doi = {https://doi.org/10.1007/978-3-642-46773-8_58}, pages = {223}, year = {1992}, abstract = {F{\"u}r die Erstellung von Maschinenbelegungsplanen wurden im Operations Research aufwendige Optimierungsverfahren konzipiert und entsprechende Programme entwickelt. Maschinenbelegungsprobleme sind klassische Vertreter der Klasse der np-vollst{\"a}ndigen Probleme, also sichere Kandidaten f{\"u}r kombinatorische Explosion der L{\"o}sungsalternativen. Deshalb ist der Einsatz konventioneller Planungssysteme wegen der hohen Rechneranforderungen der g{\"a}ngigen Verfahren an die Hardware oft nicht praktikabel.}, language = {de} } @incollection{BlachianFissabre2002, author = {Blachian, Marion and Fissabre, Anke}, title = {Der Hof Dorfstraße 32 in Kaulsdorf : Bauforschung und Dorfgeschichte}, series = {Die Denkmale in Berlin : Bezirk Marzahn-Hellersdorf : Ortsteile Kaulsdorf, Mahlsdorf und Hellersdorf}, booktitle = {Die Denkmale in Berlin : Bezirk Marzahn-Hellersdorf : Ortsteile Kaulsdorf, Mahlsdorf und Hellersdorf}, publisher = {Lukas-Verlag}, address = {Berlin}, isbn = {3-931836-73-8}, pages = {102 -- 107}, year = {2002}, language = {de} } @incollection{Vismann2015, author = {Vismann, Ulrich}, title = {Beton}, series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.}, booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01689-0 ; 978-3-410-24199-7}, doi = {10.1007/978-3-658-01689-0_11}, pages = {477 -- 495}, year = {2015}, language = {de} } @incollection{Vismann2015, author = {Vismann, Ulrich}, title = {Stahlbeton und Spannbeton nach Eurocode 2}, series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.}, booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01689-0 ; 978-3-410-24199-7}, doi = {10.1007/978-3-658-01689-0_12}, pages = {497 -- 655}, year = {2015}, language = {de} } @incollection{StroetmannLohse2015, author = {Stroetmann, Richard and Lohse, Wolfram}, title = {Stahlbau}, series = {Wendehorst bautechnische Zahlentafeln / 35. Auflage}, booktitle = {Wendehorst bautechnische Zahlentafeln / 35. Auflage}, editor = {Vismann, Ulrich}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01689-0 ; 978-3-410-24199-7}, doi = {10.1007/978-3-658-01689-0_13}, pages = {657 -- 859}, year = {2015}, abstract = {Es ist zwischen St{\"a}hlen bis S460 und solchen mit h{\"o}herer Streckgrenze zu unterscheiden. St{\"a}hle bis S460 sind auch f{\"u}r die plastische Tragwerksberechnung nach dem Fließgelenkverfahren zugelassen. Bei St{\"a}hlen oberhalb S460 bis S700 ist neben der elastischen eine nichtlineare plastische Tragwerksberechnung unter Ber{\"u}cksichtigung von Teilplastizierungen von Bauteilen in Fließzonen m{\"o}glich.}, language = {de} } @incollection{Feiser2015, author = {Feiser, Johannes}, title = {Geotechnik}, series = {Wendehorst Bautechnische Zahlentafeln / 35. Auflage}, booktitle = {Wendehorst Bautechnische Zahlentafeln / 35. Auflage}, editor = {Vismann, Ulrich}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01688-3 (Print)}, doi = {10.1007/978-3-658-01689-0_17}, pages = {1019 -- 1101}, year = {2015}, abstract = {In der nationalen und der europ{\"a}ischen Normung werden die geotechnischen Aufgaben zwecks Mindestanforderungen an Baugrunduntersuchung, rechnerische Nachweise und {\"U}berwachung der Ausf{\"u}hrung in drei Klassen (Kategorien) eingeteilt. Sie richten sich nach der zu erwartenden Reaktion des Baugrundes, nach dem geotechnischen Schwierigkeitsgrad des Tragwerks und seiner Einfl{\"u}sse auf die Umgebung. In DIN 4020 wurde die Einteilung bez{\"u}glich Art und Umfang der geotechnischen Untersuchungen bereits verbindlich eingef{\"u}hrt.}, language = {de} } @incollection{Timme2015, author = {Timme, Michael}, title = {Wettbewerbsregeln (\S\S 24-27)}, series = {M{\"u}nchener Kommentar zum europ{\"a}ischen und deutschen Wettbewerbsrecht (Kartellrecht) : Kartellrecht, Missbrauchs- und Fusionskontrolle / hrsg. von Joachim Bornkamm; Frank Montag; Franz J{\"u}rgen S{\"a}cker. Bd 2: Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB), \S\S 1-96, 130, 131. Bd 2:}, booktitle = {M{\"u}nchener Kommentar zum europ{\"a}ischen und deutschen Wettbewerbsrecht (Kartellrecht) : Kartellrecht, Missbrauchs- und Fusionskontrolle / hrsg. von Joachim Bornkamm; Frank Montag; Franz J{\"u}rgen S{\"a}cker. Bd 2: Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB), \S\S 1-96, 130, 131. Bd 2:}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-65462-6}, pages = {267 -- 286}, year = {2015}, language = {de} } @incollection{Pietsch2006, author = {Pietsch, Wolfram}, title = {Kundenorientierte Positionierung von IT-Services}, series = {IT-Kostenfaktor oder strategische Waffe? : Gesch{\"a}ftsziele und IT in Einklang bringen / Hrsg. Georg Herzwurm}, booktitle = {IT-Kostenfaktor oder strategische Waffe? : Gesch{\"a}ftsziele und IT in Einklang bringen / Hrsg. Georg Herzwurm}, publisher = {Lemmens}, address = {Bonn}, isbn = {9783932306778}, pages = {105 -- 124}, year = {2006}, language = {de} } @incollection{Wollert2005, author = {Wollert, J{\"o}rg}, title = {Bluetooth, WLAN und ZigBee f{\"u}r die Automatisierungstechnik}, series = {Jahrbuch Elektrotechnik 2006}, booktitle = {Jahrbuch Elektrotechnik 2006}, publisher = {VDE Verl.}, address = {Berlin [u.a.]}, isbn = {978-3-8007-2895-4}, pages = {27 -- 41}, year = {2005}, language = {de} } @incollection{GidomPietsch1991, author = {Gidom, D. and Pietsch, Wolfram}, title = {Integrierte Steuerung von Bauprojekten durch Expertensysteme}, series = {Dortmunder Expertensystemtage '91 : in Verbindung mit dem 3. Anwenderforum des KI-Verbundes NRW}, booktitle = {Dortmunder Expertensystemtage '91 : in Verbindung mit dem 3. Anwenderforum des KI-Verbundes NRW}, publisher = {T{\"U}V Rheinland}, address = {K{\"o}ln}, isbn = {3-88585-998-X}, pages = {356 -- 365}, year = {1991}, language = {de} } @incollection{Strohmeier2015, author = {Strohmeier, Andreas}, title = {Siedlungswasserwirtschaft}, series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.}, booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01688-3}, pages = {1157 -- 1230}, year = {2015}, language = {de} } @incollection{Biener2015, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.}, booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01688-3}, pages = {1231 -- 1260}, year = {2015}, language = {de} } @incollection{FissabreNiethammer2011, author = {Fissabre, Anke and Niethammer, Bernd}, title = {Early Glazed Curtain Walls and their Preservation}, series = {Il vetro nell'architettura del XX secolo : conservazione e restauro = Glass in the 20th Century Architecture : Preservation and Restoration}, booktitle = {Il vetro nell'architettura del XX secolo : conservazione e restauro = Glass in the 20th Century Architecture : Preservation and Restoration}, editor = {Graf, Franz}, publisher = {Mendrisio Academy Press}, address = {Mendrisio}, isbn = {9788887624502}, pages = {185 -- 199}, year = {2011}, language = {en} } @incollection{BorchertBremen2014, author = {Borchert, J{\"o}rg and Bremen, Frank}, title = {Gesch{\"a}fts- und Organisationsmodelle f{\"u}r ein Strom- und Gas-Portfoliomanagement}, series = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche}, booktitle = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche}, publisher = {KS-Energy-Verl.}, address = {Berlin}, isbn = {978-3-9813142-9-8}, pages = {11 -- 28}, year = {2014}, language = {de} } @incollection{BorchertLintzel2012, author = {Borchert, J{\"o}rg and Lintzel, P.}, title = {Risiken des Handels}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, edition = {3. Aufl.}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-9813142-9-8}, pages = {303 -- 312}, year = {2012}, language = {de} } @incollection{Borchert2012, author = {Borchert, J{\"o}rg}, title = {Aufbau von Handelseinheiten}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, edition = {3. Aufl.}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-63237-2}, pages = {467 -- 479}, year = {2012}, language = {de} } @incollection{BorchertMichels2012, author = {Borchert, J{\"o}rg and Michels, A.}, title = {Beschaffungsstrategien an der Schnittstelle Energiehandel / Vertrieb}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, ines}, edition = {3. Aufl.}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-63237-2}, pages = {508 -- 522}, year = {2012}, language = {de} } @incollection{LintzelBorchert2009, author = {Lintzel, P. and Borchert, J{\"o}rg}, title = {Risiken des Handels}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, edition = {2. Aufl.}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-58373-5}, pages = {239 -- 247}, year = {2009}, language = {de} } @incollection{BorchertHintze2009, author = {Borchert, J{\"o}rg and Hintze, D.}, title = {Der Aufbau von Handelseinheiten}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, edition = {2. Aufl.}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-58373-5}, pages = {393 -- 410}, year = {2009}, language = {de} } @incollection{MichelsBorchert2009, author = {Michels, A. and Borchert, J{\"o}rg}, title = {Beschaffungsstrategien an der Schnittstelle Energiehandel/Vertrieb}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, edition = {2. Aufl.}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-58373-5}, pages = {467 -- 481}, year = {2009}, language = {de} } @incollection{SchemmLintzelBorchert2005, author = {Schemm, R. and Lintzel, P. and Borchert, J{\"o}rg}, title = {Typische Elemente des Handelsmarktes}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {3-406-52443-5}, pages = {195 -- 216}, year = {2005}, language = {de} } @incollection{BorchertSchemmLintzel2005, author = {Borchert, J{\"o}rg and Schemm, R. and Lintzel, P.}, title = {Risiken des Handelsgesch{\"a}ftes}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {3-406-52443-5}, pages = {218 -- 235}, year = {2005}, language = {de} } @incollection{Borchert2008, author = {Borchert, J{\"o}rg}, title = {Risikomanagement in der Energiewirtschaft : Eine Risikoanalyse der elektrizit{\"a}tswirtschaftlichen Wertsch{\"o}pfungskette}, series = {Rechtliche Grundlagen des Risikomanagements : Haftungs- und Strafvermeidung f{\"u}r Corporate Complience}, booktitle = {Rechtliche Grundlagen des Risikomanagements : Haftungs- und Strafvermeidung f{\"u}r Corporate Complience}, editor = {Romeike, Frank}, publisher = {Erich Schmidt}, address = {Berlin}, isbn = {978-350-310647-9}, pages = {231 -- 270}, year = {2008}, language = {de} } @incollection{Vismann2012, author = {Vismann, Ulrich}, title = {Stahlbetonbau}, series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0999-5 ; 978-3-8348-8229-5}, doi = {10.1007/978-3-8348-8229-5_9}, pages = {223 -- 262}, year = {2012}, language = {de} } @incollection{BorchertHeimannSchemm2011, author = {Borchert, J{\"o}rg and Heimann, Thorsten and Schemm, Ralf}, title = {Speicheroptimierung}, series = {Gashandel und Gasbeschaffung}, booktitle = {Gashandel und Gasbeschaffung}, publisher = {Euroforum Verl.}, address = {D{\"u}sseldorf}, publisher = {Fachhochschule Aachen}, pages = {1 -- 69}, year = {2011}, abstract = {In dieser Lektion wurden beginnend mit der Darstellung des fundamentalen Wandels des Gasmarktes die daraus folgenden Implikationen f{\"u}r die Einsatzweise von Gasspeichern abgeleitet. Anschließend wurden zwei Bewertungs- und Steuerungsverfahren f{\"u}r einen Gasspeicher an den beiden Marktstufen Termin- und Spotmarkt methodisch vorgestellt und anhand von Beispielrechnungen illustriert. Das Verfahren zur Bewertung und Steuerung im Terminmarkt stellt ein sehr robustes und methodisch einfaches Verfahren dar. Hierbei wird die Saisonalit{\"a}t der Forwardkurve bzw. deren Ver{\"a}nderungen arbitragefrei mithilfe des Speichers ausgenutzt. Dieses Verfahren kann nicht den gesamten Zeitwert des Speichers ausweisen. Es zieht in jedem Zeitpunkt nur die aktuellen Informationen der Forwardkurve zur Entscheidung heran. Es bildet aber keine bedingte Erwartung {\"u}ber zuk{\"u}nftige Ertr{\"a}ge und deren Beeinflussung durch die aktuelle Speicherfahrweise, um hieraus eine optimale Entscheidung zu formulieren. Bei der Bewertung gegen{\"u}ber dem Spotmarkt mithilfe der Least-Squares-Monte- Carlo-Simulation wird in einer stochastischen Optimierung dagegen der volle Zeitwert des Speichers und damit der gesamte Zusatznutzen der Flexibilit{\"a}t ermittelt. Hierdurch leiten sich auch wesentlich andere Hedging-Empfehlungen als im ersten Verfahren ab, um diesen zu sichern. Der Einsatz der beiden Verfahren im Alltag zur Bewirtschaftung des Speichers h{\"a}ngt insbesondere vom Know-how, den Speicherparametern und der Risikobereitschaft des Handels ab. Beide Strategien liefern hierzu Hedging-Empfehlungen ab, mit welchem der zugrunde liegende Wert gesichert werden kann. Risikoaverse H{\"a}ndler, die einen Großteil des inneren Wertes sichern wollen, k{\"o}nnten im Terminmarkt einen Großteil des Speichers mithilfe des „Intrinsic Rolling"-Verfahrens bewirtschaften. Sie w{\"u}rden hierdurch den saisonalen Spread in der Forwardkurve rollierend sichern. Gleichzeitig kann ein kleinerer Anteil mithilfe der stochastischen Optimierung und den damit verbundenen Aus{\"u}bungsgrenzen gegen{\"u}ber dem Spotmarkt bewirtschaftet werden. In einem liquiden vollst{\"a}ndigen Markt wird eine Steuerung des Speichers allein gegen{\"u}ber den vorhandenen Marktstufen vorgenommen und der Wert f{\"u}r alle Marktteilnehmer objektiv messbar. F{\"u}r den Fall, dass der Markt illiquide ist und hierdurch z. B. eine Kundenlast nicht allein am Termin- und Spotmarkt jederzeit gedeckt werden kann, erscheint es notwendig, den Speicher im Kontext einer Portfoliooptimierung zu bewerten. Dies wird in der n{\"a}chsten Lektion vorgenommen. Hierbei ist aber zu beachten, dass der Speicher dadurch eine individualisierte Wertkomponente erh{\"a}lt, die von der konkreten Ausgestaltung des jeweiligen Portfolios abh{\"a}ngt.}, language = {de} } @incollection{StroetmannLohse2012, author = {Stroetmann, Richard and Lohse, Wolfram}, title = {Stahlbau}, series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0999-5 ; 978-3-8348-8229-5}, doi = {10.1007/978-3-8348-8229-5_10}, pages = {263 -- 361}, year = {2012}, language = {de} } @incollection{Feiser2012, author = {Feiser, Johannes}, title = {Geotechnik}, series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0999-5 ; 978-3-8348-8229-5}, doi = {10.1007/978-3-8348-8229-5_14}, pages = {453 -- 495}, year = {2012}, language = {de} } @incollection{Strohmeier2012, author = {Strohmeier, Andreas}, title = {Siedlungswasserwirtschaft}, series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0999-5 ; 978-3-8348-8229-5}, doi = {10.1007/978-3-8348-8229-5_16}, pages = {527 -- 566}, year = {2012}, language = {de} } @incollection{Biener2012, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0999-5 ; 978-3-8348-8229-5}, doi = {10.1007/978-3-8348-8229-5_17}, pages = {567 -- 603}, year = {2012}, language = {de} } @incollection{Vismann2009, author = {Vismann, Ulrich}, title = {Stahlbetonbau}, series = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0684-0 ; 978-3-8348-9997-2}, doi = {10.1007/978-3-8348-9997-2_9}, pages = {203 -- 233}, year = {2009}, language = {de} } @incollection{Lohse2009, author = {Lohse, Wolfram}, title = {Stahlbau}, series = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0684-0 ; 978-3-8348-9997-2}, doi = {10.1007/978-3-8348-9997-2_10}, pages = {235 -- 274}, year = {2009}, language = {de} } @incollection{Feiser2009, author = {Feiser, Johannes}, title = {Geotechnik}, series = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0684-0 ; 978-3-8348-9997-2}, doi = {10.1007/978-3-8348-9997-2_13}, pages = {351 -- 392}, year = {2009}, language = {de} } @incollection{Strohmeier2009, author = {Strohmeier, Andreas}, title = {Siedlungswasserwirtschaft}, series = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0684-0 ; 978-3-8348-9997-2}, doi = {10.1007/978-3-8348-9997-2_15}, pages = {423 -- 462}, year = {2009}, language = {de} } @incollection{RebelHueningScholletal.2015, author = {Rebel, S{\"o}ren and H{\"u}ning, Felix and Scholl, Ingrid and Ferrein, Alexander}, title = {MQOne: Low-cost design for a rugged-terrain robot platform}, series = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)}, booktitle = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-22875-4 (print) ; 978-3-319-22876-1 (E-Book)}, doi = {10.1007/978-3-319-22876-1_19}, pages = {209 -- 221}, year = {2015}, abstract = {Rugged terrain robot designs are important for field robotics missions. A number of commercial platforms are available, however, at an impressive price. In this paper, we describe the hardware and software component of a low-cost wheeled rugged-terrain robot. The robot is based on an electric children quad bike and is modified to be driven by wire. In terms of climbing properties, operation time and payload it can compete with some of the commercially available platforms, but at a far lower price.}, language = {en} } @incollection{KuemmellHillgaertner2015, author = {K{\"u}mmell, Steffen and Hillg{\"a}rtner, Michael}, title = {Inductive charging comfortable and nonvisible charging stations for urbanised areas}, series = {E-Mobility in Europe : trends and good practice}, booktitle = {E-Mobility in Europe : trends and good practice}, publisher = {Springer}, address = {Cham [u.a.]}, isbn = {978-3-319-13193-1}, doi = {10.1007/978-3-319-13194-8_16}, pages = {297 -- 309}, year = {2015}, abstract = {For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today's state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles' needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future's inductive charging infrastructures, several field tests had been carried out and are planned in near future.}, language = {en} } @incollection{RahierRitzWallenborn2015, author = {Rahier, Michael and Ritz, Thomas and Wallenborn, Ramona}, title = {Information and communication technology for integrated mobility concepts such as E-carsharing}, series = {E-Mobility in Europe : trends and good practice}, booktitle = {E-Mobility in Europe : trends and good practice}, publisher = {Springer}, address = {Cham [u.a.]}, isbn = {978-3-319-13193-1}, doi = {10.1007/978-3-319-13194-8_17}, pages = {311 -- 326}, year = {2015}, abstract = {During the past decade attitude towards sharing things has changed extremely. Not just personal data is shared (e.g. in social networks) but also mobility. Together with the increased ecological awareness of the recent years, new mobility concepts have evolved. E-carsharing has become a symbol for these changes of attitude. The management of a shared car fleet, the energy management of electric mobility and the management of various carsharing users with individual likes and dislikes are just some of the major challenges of e-carsharing. Weaving it into integrated mobility concepts, this raises complexity even further. These challenges can only be overcome by an appropriate amount of well-shaped information available at the right place and time. In order to gather, process and share the required information, fleet cars have to be equipped with modern information and communication technology (ICT) and become so-called fully connected cars. Ensuring the usability of these ICT systems is another challenge that is often neglected, even though it is usability that makes carsharing comfortable, attractive and supports users' new attitudes. By means of an integrated and consistent concept for human-machine interaction (HMI), the usability of such systems can be raised tremendously.}, language = {en} } @incollection{BusseEschMuntaniol2015, author = {Busse, Daniel and Esch, Thomas and Muntaniol, Roman}, title = {Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments}, series = {E-Mobility in Europe : trends and good practice}, booktitle = {E-Mobility in Europe : trends and good practice}, publisher = {Springer}, address = {Cham [u.a.]}, isbn = {978-3-319-13193-1}, doi = {10.1007/978-3-319-13194-8_18}, pages = {327 -- 343}, year = {2015}, abstract = {The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.}, language = {en} } @incollection{SeiblerSchwenk2010, author = {Seibler, Jost and Schwenk, Frieder}, title = {Transgenic RNAi Applications in the Mouse}, series = {Methods in Enzymology : Guide to Techniques in Mouse Development, Part B: Mouse Molecular Genetics. 2nd Edition}, booktitle = {Methods in Enzymology : Guide to Techniques in Mouse Development, Part B: Mouse Molecular Genetics. 2nd Edition}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {978-0-12-384880-2}, pages = {367 -- 386}, year = {2010}, language = {en} } @incollection{BurgerKirschMarcheretal.2014, author = {Burger, Ulrich and Kirsch, Ansgar and Marcher, Thomas and H{\"o}ser, Sebastian}, title = {Geologisch-geotechnischer Planungsprozess von Tunnelbauten mit Schwerpunkt tiefliegender Tunnel}, series = {Beton-Kalender ; Bd. 103: Unterirdisches Bauen, Grundbau, Eurocode 7}, booktitle = {Beton-Kalender ; Bd. 103: Unterirdisches Bauen, Grundbau, Eurocode 7}, publisher = {Ernst}, address = {Berlin}, isbn = {978-3-433-03051-6 ; 978-3-433-60335-2 ; 978-3-433-60508-0 ; 3-433-60508-4}, pages = {37 -- 62}, year = {2014}, language = {de} } @incollection{Biener2009, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0684-0 ; 978-3-8348-9997-2}, doi = {10.1007/978-3-8348-9997-2_16}, pages = {463 -- 499}, year = {2009}, language = {de} } @incollection{Feiser2005, author = {Feiser, Johannes}, title = {Geotechnik}, series = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.}, publisher = {Teubner}, address = {Stuttgart}, isbn = {3-519-00489-5 ; 978-3-519-00489-9}, pages = {195 -- 220}, year = {2005}, language = {de} } @incollection{Strohmeier2005, author = {Strohmeier, Andreas}, title = {Wasserwirtschaft}, series = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.}, publisher = {Teubner}, address = {Stuttgart}, isbn = {3-519-00489-5 ; 978-3-519-00489-9}, pages = {221 -- 254}, year = {2005}, language = {de} } @incollection{Lohse2005, author = {Lohse, Wolfram}, title = {Stahlbau}, series = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.}, publisher = {Teubner}, address = {Stuttgart}, isbn = {3-519-00489-5 ; 978-3-519-00489-9}, pages = {99 -- 136}, year = {2005}, language = {de} } @incollection{Borchert1997, author = {Borchert, J{\"o}rg}, title = {Der Elektrizit{\"a}tsmarkt in Indonesien und Beteiligungsm{\"o}glichkeiten privater Unternehmen}, series = {Investitionsf{\"u}hrer ASEAN, Indochina, 1997 : Brunei, Indonesien, Kambodscha, Laos, Malaysia, Myanmar, Philippinen, Singapur, Thailand, Vietnam}, booktitle = {Investitionsf{\"u}hrer ASEAN, Indochina, 1997 : Brunei, Indonesien, Kambodscha, Laos, Malaysia, Myanmar, Philippinen, Singapur, Thailand, Vietnam}, edition = {Stand: Mai 1997}, publisher = {Berliner Bank AG}, address = {Berlin}, pages = {42 -- 52}, year = {1997}, language = {de} } @incollection{VismannSchueller2015, author = {Vismann, Ulrich and Sch{\"u}ller, Michael}, title = {Stahlbetonbau}, series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage}, booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01680-7 ; 978-3-658-01681-4}, doi = {10.1007/978-3-658-01681-4_9}, pages = {243 -- 322}, year = {2015}, abstract = {Das Kapitel Stahlbetonbau besteht aus einer Formelsammlung (Teil A) sowie einem Praxisbeispiel (Teil B). In dem Praxisbeispiel werden exemplarisch die erforderlichen Rechenschritte und Nachweise zur Bemessung im GZT und GZG nach Eurocode 2 [1] vorgestellt. Die Hinweise im Text beziehen sich, soweit nicht explizit erw{\"a}hnt, auf Wendehorst, Bautechnische Zahlentafeln, 35. Auflage, „Stahlbeton- und Spannbetonbau nach Eurocode 2" [2]. Die zum Praxisbeispiel zugeh{\"o}rigen Konstruktions- und Bewehrungszeichnungen stehen im Onlineportal zu diesem Buch zum kostenlosen Download bereit (siehe unter www.springer.com).}, language = {de} } @incollection{StroetmannLohse2015, author = {Stroetmann, Richard and Lohse, Wolfram}, title = {Stahlbau}, series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage}, booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01689-0 ; 978-3-410-24199-7}, doi = {10.1007/978-3-658-01681-4_10}, pages = {323 -- 431}, year = {2015}, language = {de} } @incollection{Feiser2015, author = {Feiser, Johannes}, title = {Geotechnik}, series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage}, booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01689-0 ; 978-3-410-24199-7}, doi = {10.1007/978-3-658-01681-4_14}, pages = {547 -- 598}, year = {2015}, language = {de} } @incollection{Strohmeier2015, author = {Strohmeier, Andreas}, title = {Siedlungswasserwirtschaft}, series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage}, booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01689-0 ; 978-3-410-24199-7}, doi = {10.1007/978-3-658-01681-4_16}, pages = {635 -- 678}, year = {2015}, abstract = {Nachfolgende Ausf{\"u}hrungen und Berechnungsbeispiele beziehen sich auf Kapitel 19 Siedlungswasserwirtschaft im „Wendehorst: Bautechnische Zahlentafeln 35. Auflage 2015" (abgek{\"u}rzt: BZ). F{\"u}r den Bau von Anlagen der Siedlungswasserwirtschaft sind ebenso die Grundlagen der Hydraulik zu ber{\"u}cksichtigen. Aus diesem Grunde sind auch die entsprechenden Ausf{\"u}hrungen zur Hydraulik zu beachten.}, language = {de} } @incollection{Biener2015, author = {Biener, Ernst}, title = {Abfallwirtschaft}, series = {Wendehorst Beispiele aus der Baupraxis. - 5. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 5. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-01689-0 ; 978-3-410-24199-7}, doi = {10.1007/978-3-658-01681-4_17}, pages = {680 -- 723}, year = {2015}, language = {de} } @incollection{PoghossianSchusserBaeckeretal.2015, author = {Poghossian, Arshak and Schusser, Sebastian and B{\"a}cker, M. and Leinhos, Marcel and Sch{\"o}ning, Michael Josef}, title = {Real-time in-situ electrical monitoring of the degradation of biopolymers using semiconductor field-effect devices}, series = {Biodegradable biopolymers. Vol. 1}, booktitle = {Biodegradable biopolymers. Vol. 1}, publisher = {Nova Science Publ.}, address = {Hauppauge}, isbn = {978-1-63483-632-6}, pages = {135 -- 153}, year = {2015}, language = {en} } @incollection{DigelSadykovTemizArtmannetal.2015, author = {Digel, Ilya and Sadykov, R. and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard}, title = {Changes in intestinal microflora in rats induced by oral exposure to low lead (II) concentrations}, series = {Lead Exposure and Poisoning: Clinical Symptoms, Medical Management and Preventive Strategies}, booktitle = {Lead Exposure and Poisoning: Clinical Symptoms, Medical Management and Preventive Strategies}, publisher = {Nova Science Publ.}, isbn = {9781634826990}, pages = {75 -- 99}, year = {2015}, language = {en} } @incollection{Krause2016, author = {Krause, Thomas}, title = {Bauabrechnung und Mengenermittlung}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_7}, pages = {963 -- 1027}, year = {2016}, abstract = {In diesem Kapitel werden die Abrechnungsvorschriften wichtiger ATV kurz, aber umfassend zusammengestellt. Einigen Abrechnungsbestimmungen f{\"u}r Einzelleistungen, die keine Nebenleistungen sind ((siehe DIN 18299 und Abschnitt 4 der jeweiligen ATV), sind mit aufgenommen worden; die ATV enthalten jedoch weitergehende Festlegungen {\"u}ber Nebenleistungen und Besondere Leistungen. Im Anschluss folgen Hinweise zu den Toleranzen im Hochbau sowie im Straßenbau.}, language = {de} } @incollection{Schloesser2016, author = {Schl{\"o}sser, Karl Helmut}, title = {Arbeitsvorbereitung und Ablaufplanung}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_8}, pages = {1029 -- 1067}, year = {2016}, abstract = {Kosten- und Verfahrensvergleiche k{\"o}nnen dabei zur Ermittlung des f{\"u}r die Aufgabe geeignetsten Bauverfahren f{\"u}hren. F{\"u}r die sich daran anschließende Ablaufplanung werden die verschiedenen graphischen sowie rechnerischen Instrumente (Terminliste und Taktplan, Balkenplan, Weg-Zeit-Diagramm und Netzplan) erl{\"a}utert und anhand von Beispielen vertieft. Schließlich wird ein im Rahmen der Arbeits- und Nachkalkulation vorzunehmender Soll-Ist-Vergleich mit Hilfe des Bauarbeitsschl{\"u}ssels (BAS) zur {\"U}berpr{\"u}fung der Aufwands- und Leistungswerte dargestellt.}, language = {de} } @incollection{KrauseOettel2016, author = {Krause, Thomas and Oettel, Britta}, title = {Baumaschinen}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_9}, pages = {1069 -- 1163}, year = {2016}, abstract = {Die Leistungsermittlung und Bemessung von Baumaschinen f{\"u}r die folgenden Bereiche werden bearbeitet: Maschinen f{\"u}r den Betonbau, Hebezeuge, Maschinen f{\"u}r den Erdbau, Straßenbaumaschinen, R{\"u}ckbauger{\"a}te und Elemente der Baustelleneinrichtung}, language = {de} } @incollection{Ulke2016, author = {Ulke, Bernd}, title = {Boden, Baugrube, Verbau}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_10}, pages = {1165 -- 1246}, year = {2016}, abstract = {Die L{\"o}sung den Baugrund betreffender Fragestellungen beginnen i. d. R. mit der Durchf{\"u}hrung von Baugrunderkundungen, um alle notwendigen Parameter zu erhalten, die f{\"u}r die Planung und Durchf{\"u}hrung von Bauvorhaben notwendig sind. Im Folgenden werden die wichtigsten Erkundungen in Abh{\"a}ngigkeit der erforderlichen G{\"u}teklasse der Proben beschrieben und vorgestellt.}, language = {de} } @incollection{KrauseKremer2016, author = {Krause, Thomas and Kremer, Norbert}, title = {Schalung und Ger{\"u}ste}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_11}, pages = {1247 -- 1296}, year = {2016}, abstract = {Systemschalungen und Systemger{\"u}ste haben den Baustellenbetrieb in vielen Bereichen sehr vereinfacht. Dennoch sind Kenntnisse in diesen Feldern f{\"u}r eine erfolgreiche und effektive Bauleitung unverzichtbar. In diesem Kapitel werden Hinweise und Empfehlungen f{\"u}r die Bemessung und Einsatz von Schalungen, Trag- und Arbeitsger{\"u}sten f{\"u}r den Baustellenbetrieb gegeben.}, language = {de} } @incollection{Martin2016, author = {Martin, Joachim}, title = {Betriebsorganisation}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_12}, pages = {1297 -- 1389}, year = {2016}, abstract = {Das Kapitel behandelt, ausgehend von Begriffen und Aufgaben der Betriebsorganisation, die Aufbau- und Ablauforganisation der Bauunternehmung sowie die Gestaltung einer Projekt-organisation. Es folgt eine Darstellung der Managementsysteme f{\"u}r Qualit{\"a}t, Umwelt und Arbeitsschutz, die sich zunehmend als sog. integrierte Managementsysteme (IMS) auch in Bauunternehmen etablieren. Grundlagen des Personalmanagements und des betrieblichen Rechnungswesens, die f{\"u}r eine(n) Baubetriebler(in) relevant sein k{\"o}nnen, erg{\"a}nzen das Kap. Betriebsorganisation. Den Abschluss bilden Hinweise zum Berichtswesen der Baustelle.}, language = {de} } @incollection{Streit2016, author = {Streit, Wilfried}, title = {Kalkulation}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_13}, pages = {1391 -- 1501}, year = {2016}, abstract = {Das Kapitel behandelt die Kosten- und Preisermittlung, die Kostenvorgabe und Kostenkontrolle. Der Angebotspreis wird aufgeschl{\"u}sselt in die Einzelkosten der Teilleistungen, die Baustellengemeinkosten, die Allgemeinen Gesch{\"a}ftskosten und einen Zuschlag f{\"u}r Wagnis und Gewinn. Auf der Basis der Angebotskalkulation werden die Vorgaben f{\"u}r die Kostenkontrolle entwickelt.}, language = {de} } @incollection{Lemke2016, author = {Lemke, J{\"o}rg}, title = {Unfallverh{\"u}tung, Arbeits- und Gesundheitsschutz}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_15}, pages = {1599 -- 1638}, year = {2016}, abstract = {Neben dem durch Unf{\"a}lle und Krankheiten entstehenden menschlichen Leids und der daraus resultierenden moralischen Verpflichtung, sich und seine Mitmenschen vor Schaden zu bewahren, ist der Arbeits- und Gesundheitsschutz auch ein Gebot wirtschaftlichen Handelns, da Arbeitsunf{\"a}lle und Berufskrankheiten Ausfallzeiten und Kosten verursachen. So geh{\"o}ren Arbeits- und Gesundheitsschutz zu den wichtigen Aufgaben eines Unternehmens.}, language = {de} } @incollection{BorchertRothe2016, author = {Borchert, J{\"o}rg and Rothe, Sebastian}, title = {Energiemanagement und Versorgung von Chemieparks - Ein Ansatz zur wertsch{\"o}pfungsgetriebenen Risikosteuerung}, series = {Chemiestandorte : Markt, Herausforderungen und Gesch{\"a}ftsmodelle}, booktitle = {Chemiestandorte : Markt, Herausforderungen und Gesch{\"a}ftsmodelle}, editor = {Suntrop, Carsten}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {978-3-527-33441-4}, pages = {193 -- 210}, year = {2016}, language = {de} } @incollection{EversFleischhakerPalffyetal.2010, author = {Evers, J{\"o}rg and Fleischhaker, Robert and P{\´a}lffy, A. and Keitel, C.}, title = {Light propagation : From atomic to nuclear quantum optics}, series = {Modern optics and photonics: atoms and structured media}, booktitle = {Modern optics and photonics: atoms and structured media}, publisher = {World Scientific Publishing Co.}, isbn = {978-981431327-8}, doi = {10.1142/9789814313278_0001}, pages = {3 -- 15}, year = {2010}, language = {en} }