@inproceedings{BarnatBosseMergneretal.2017,
  author    = {Barnat, Miriam and Bosse, Elke and Mergner, Julia and J{\"a}nsch, Vanessa},
  title     = {Entwicklung studienrelevanter Kompetenzen im Zusammenspiel mit Studieneinstiegsangeboten},
  series = {KoBF-Auswertungsworkshop 31.05.-01.06.2017},
  booktitle = {KoBF-Auswertungsworkshop 31.05.-01.06.2017},
  pages     = {53 Seiten},
  year      = {2017},
  language  = {de}
}
@misc{MayntzKeimerTegtmeyeretal.2021,
  author    = {Mayntz, Joscha and Keimer, Jona and Tegtmeyer, Philipp and Dahmann, Peter and Hille, Sebastian and Stumpf, Eike and Fisher, Alex and Dorrington, Graham},
  title     = {Aerodynamic Investigation on Efficient Inflight Transition of a Propeller from Propulsion to Regeneration Mode},
  series = {AIAA SCITECH 2022 Forum},
  journal   = {AIAA SCITECH 2022 Forum},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2022-0546},
  year      = {2021},
  abstract  = {This paper discusses a new way of inflight power regeneration for electric or hybrid-electric driven general aviation aircraft with one powertrain for both configurations. Three different approaches for the shift from propulsion to regeneration mode are analyzed. Numerical cal-culation and wind tunnel results are compared and show the highest regeneration potential for the "Windmill" approach, where the propeller blades are flipped, and rotation is reversed. A combination of all regeneration approaches for a realistic flight mission is discussed.},
  language  = {en}
}
@misc{Rosenkranz2001,
  author    = {Rosenkranz, Josef},
  title     = {{\"U}berwachungsvorrichtung f{\"u}r eine Auswuchtmaschine : Patentschrift},
  publisher = {Deutsches Patent- und Markenamt},
  address   = {M{\"u}nchen},
  pages     = {6 S. : graph. Darst.},
  year      = {2001},
  language  = {de}
}
@inproceedings{HuthElsenHartwigetal.2006,
  author    = {Huth, Thomas and Elsen, Olaf and Hartwig, Christoph and Esch, Thomas},
  title     = {Innovative modular valve trains for 2015 - logistic benefits by EMVT},
  series = {IFAC Proceedings Volumes, Volume 39, Issue 3},
  booktitle = {IFAC Proceedings Volumes, Volume 39, Issue 3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.3182/20060517-3-FR-2903.00172},
  pages     = {315 -- 320},
  year      = {2006},
  abstract  = {In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary.},
  language  = {en}
}
@inproceedings{KemperHellenbroichEsch2009,
  author    = {Kemper, Hans and Hellenbroich, Gereon and Esch, Thomas},
  title     = {Concept of an innovative passenger-car hybrid drive for European driving conditions},
  series = {Hybrid vehicles and energy management : 6th symposium ; 18th and 19th February 2009, Stadthalle Braunschweig},
  booktitle = {Hybrid vehicles and energy management : 6th symposium ; 18th and 19th February 2009, Stadthalle Braunschweig},
  publisher = {Gesamtzentrum f{\"u}r Verkehr (GZVB)},
  address   = {Braunschweig},
  isbn      = {978-3-937655-20-8},
  pages     = {264 -- 287},
  year      = {2009},
  abstract  = {The downsizing of spark ignition engines in conjunction with turbocharging is considered to be a promising method for reducing CO₂ emissions. Using this concept, FEV has developed a new, highly efficient drivetrain to demonstrate fuel consumption reduction and drivability in a vehicle based on the Ford Focus ST. The newly designed 1.8L turbocharged gasoline engine incorporates infinitely variable intake and outlet control timing and direct fuel injection utilizing piezo injectors centrally located. In addition, this engine uses a prototype FEV engine control system, with software that was developed and adapted entirely by FEV. The vehicle features a 160 kW engine with a maximum mean effective pressure of 22.4 bar and 34 \% savings in simulated fuel consumption. During the first stage, a new electrohydraulically actuated hybrid transmission with seven forward gears and one reverse gear and a single dry starting clutch will be integrated. The electric motor of the hybrid is directly connected to the gear set of the transmission. Utilizing the special gear set layout, the electric motor can provide boost during a change of gears, so that there is no interruption in traction. Therefore, the transmission system combines the advantages of a double clutch controlled gear change (gear change without an interruption in traction) with the efficient, cost-effective design of an automated manual transmission system. Additionally, the transmission provides a purely electric drive system and the operation of an air-conditioning compressor during the engine stop phases. One other alternative is through the use of CAI (Controlled Auto Ignition), which incorporates a process developed by FEV for controlled compression ignition.},
  language  = {en}
}
@inproceedings{Wahle1983,
  author    = {Wahle, Michael},
  title     = {Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects},
  series = {Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1},
  booktitle = {Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1},
  publisher = {British Nuclear Energy Society},
  address   = {London},
  isbn      = {0-7277-0192-4 (Druckausg.)},
  pages     = {162 -- 183},
  year      = {1983},
  language  = {en}
}
@article{WeiheErnstRoethetal.2013,
  author    = {Weihe, Stefan and Ernst, Ansgar and R{\"o}th, Thilo and Proksch, Johannes},
  title     = {Leichtmetall-Stahl-Verbundguss im Nutzfahrzeugbau},
  series = {Lightweight Design},
  volume    = {6},
  journal   = {Lightweight Design},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2192-8738 (Online)},
  pages     = {38 -- 43},
  year      = {2013},
  abstract  = {In modernen Fahrzeugkarosserien der Großserie kommen zunehmend Materialmischbauweisen zur Anwendung. In Zusammenarbeit der Daimler AG, der Tower Automotive Holding GmbH, der Imperia GmbH sowie der Partnerunternehmen KSM Castings GmbH und Schaufler Tooling GmbH \& Co. KG wird das Leichtbaupotenzial von Stahlblech-AluminiumverbundgussHybriden am Beispiel des vorderen Dachquertr{\"a}gers des Mercedes-Benz Viano/Vito ausf{\"u}hrlich untersucht.},
  language  = {de}
}
@article{MikuckiSchulerDigeletal.2023,
  author    = {Mikucki, Jill Ann and Schuler, C. G. and Digel, Ilya and Kowalski, Julia and Tuttle, M. J. and Chua, Michelle and Davis, R. and Purcell, Alicia and Ghosh, D. and Francke, G. and Feldmann, M. and Espe, C. and Heinen, Dirk and Dachwald, Bernd and Clemens, Joachim and Lyons, W. B. and Tulaczyk, S.},
  title     = {Field-Based planetary protection operations for melt probes: validation of clean access into the blood falls, antarctica, englacial ecosystem},
  series = {Astrobiology},
  volume    = {23},
  journal   = {Astrobiology},
  number    = {11},
  publisher = {Liebert},
  address   = {New York, NY},
  issn      = {1557-8070 (online)},
  doi       = {10.1089/ast.2021.0102},
  pages     = {1165 -- 1178},
  year      = {2023},
  abstract  = {Subglacial environments on Earth offer important analogs to Ocean World targets in our solar system. These unique microbial ecosystems remain understudied due to the challenges of access through thick glacial ice (tens to hundreds of meters). Additionally, sub-ice collections must be conducted in a clean manner to ensure sample integrity for downstream microbiological and geochemical analyses. We describe the field-based cleaning of a melt probe that was used to collect brine samples from within a glacier conduit at Blood Falls, Antarctica, for geomicrobiological studies. We used a thermoelectric melting probe called the IceMole that was designed to be minimally invasive in that the logistical requirements in support of drilling operations were small and the probe could be cleaned, even in a remote field setting, so as to minimize potential contamination. In our study, the exterior bioburden on the IceMole was reduced to levels measured in most clean rooms, and below that of the ice surrounding our sampling target. Potential microbial contaminants were identified during the cleaning process; however, very few were detected in the final englacial sample collected with the IceMole and were present in extremely low abundances (∼0.063\% of 16S rRNA gene amplicon sequences). This cleaning protocol can help minimize contamination when working in remote field locations, support microbiological sampling of terrestrial subglacial environments using melting probes, and help inform planetary protection challenges for Ocean World analog mission concepts.},
  language  = {en}
}