@article{StaatVu2012,
  author    = {Staat, Manfred and Vu, Duc Khoi},
  title     = {Limit analysis of flaws in pressurized pipes and cylindrical vessels Part II: Circumferential defects},
  series = {Engineering Fracture Mechanics ; 97(2013), H. 1},
  volume    = {97},
  journal   = {Engineering Fracture Mechanics ; 97(2013), H. 1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-7944},
  doi       = {10.1016/j.engfracmech.2012.05.017},
  pages     = {314 -- 333},
  year      = {2012},
  abstract  = {Upper and lower bound theorems of limit analyses have been presented in part I of the paper. Part II starts with the finite element discretization of these theorems and demonstrates how both can be combined in a primal-dual optimization problem. This recently proposed numerical method is used to guide the development of a new class of closed-form limit loads for circumferential defects, which show that only large defects contribute to plastic collapse with a rapid loss of strength with increasing crack sizes. The formulae are compared with primal-dual FEM limit analyses and with burst tests. Even closer predictions are obtained with iterative limit load solutions for the von Mises yield function and for the Tresca yield function. Pressure loading of the faces of interior cracks in thick pipes reduces the collapse load of circumferential defects more than for axial flaws. Axial defects have been treated in part I of the paper.},
  language  = {en}
}
@misc{BaumgartnerWunderlichJaunichetal.2012,
  author    = {Baumgartner, Thomas and Wunderlich, Florian and Jaunich, Arthur and Sato, Tomoo and Bundy, Georg and Grießmann, Nadine and Kowalski, Julia and Burghardt, Stefan and Hanebrink, J{\"o}rg},
  title     = {Lighting the way: Perspectives on the global lighting market},
  edition   = {2nd ed.},
  address   = {McKinsey},
  pages     = {58},
  year      = {2012},
  language  = {en}
}
@article{WagnerShigiaharaMiyamotoetal.2012,
  author    = {Wagner, Torsten and Shigiahara, N. and Miyamoto, K. and Suzurikawa, J. and Finger, F. and Sch{\"o}ning, Michael Josef and Yoshinobu, T.},
  title     = {Light-addressable Potentiometric Sensors and Light-addressable Electrodes as a Combined Sensor-and-manipulator Microsystem with High Flexibility},
  series = {Procedia Engineering},
  journal   = {Procedia Engineering},
  number    = {47},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2012.09.290},
  pages     = {890 -- 893},
  year      = {2012},
  abstract  = {This work describes the novel combination of the light-addressable electrode (LAE) and the light-addressable potentiometric sensor (LAPS) into a microsystem set-up. Both the LAE as well as the LAPS shares the principle of addressing the active spot by means of a light beam. This enables both systems to manipulate resp. to detect an analyte with a high spatial resolution. Hence, combining both principles into a single set-up enables the active stimulation e.g., by means of electrolysis and a simultaneous observation e.g., the response of an entrapped biological cell by detection of extracellular pH changes. The work will describe the principles of both technologies and the necessary steps to integrate them into a single set-up. Furthermore, examples of application and operation of such systems will be presented.},
  language  = {en}
}
@inproceedings{FeldmannPyschnyDoeringetal.2012,
  author    = {Feldmann, Markus and Pyschny, D. and D{\"o}ring, Bernd and Kuhnhenne, Markus},
  title     = {Life cycle assessment of steel constructions},
  series = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  booktitle = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  publisher = {Taylor and Francis},
  address   = {Hoboken},
  organization    = {International Symposium on Life-Cycle Civil Engineering <3, 2012, Wien>},
  isbn      = {978-0-203-10336-4},
  pages     = {321},
  year      = {2012},
  language  = {en}
}
@inproceedings{RosemannEggertVoigtetal.2012,
  author    = {Rosemann, Michael and Eggert, Mathias and Voigt, Matthias and Beverungen, Daniel},
  title     = {Leveraging Social Network Data for Analytical CRM Strategies - The Introduction of Social BI.},
  series = {ECIS 2012 Proceedings},
  booktitle = {ECIS 2012 Proceedings},
  pages     = {12 S.},
  year      = {2012},
  language  = {en}
}
@misc{FrauenrathPfeifferHezeletal.2012,
  author    = {Frauenrath, Tobias and Pfeiffer, Harald and Hezel, Fabian and Dieringer, Matthias A. and Winter, Lukas and Gr{\"a}ßl, Andreas and Santoro, Davide and {\"O}zerdem, Celal and Renz, Wolfgang and Greiser, Andreas and Niendorf, Thoralf},
  title     = {Lessons learned from cardiac MRI at 7.0 T: LV function assessment at 3.0 T using local multi-channel transceiver coil arrays},
  series = {2012 ISMRM Annual Meeting Proceedings},
  journal   = {2012 ISMRM Annual Meeting Proceedings},
  issn      = {1545-4428},
  year      = {2012},
  abstract  = {Cardiac MR (CMR) is of proven clinical value but also an area of vigorous ongoing research since image quality is not always exclusively defined by signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR). Recent developments of CMR at 7.0 T have been driven by pioneering explorations into novel multichannel transmit and receive coil array technology to tackle the challenges B1+-field inhomogeneities, to offset specific-absorption rate (SAR) constraints and to reduce banding artifacts in SSFP imaging. For this study, recognition of the benefits and performance of local surface Tx/Rx-array structures recently established at 7.0 T inspired migration to 3.0 T, where RF inhomogeneities and SAR limitations encountered in routine clinical CMR, though somewhat reduced versus the 7.0 T situation, remain significant. For all these reasons, this study was designed to build and examine the feasibility of a local four channel Tx/Rx cardiac coil array for anatomical and functional cardiac imaging at 3.0 T. For comparison, a homebuilt 4 channel Rx cardiac coil array exhibiting the same geometry as the Tx/Rx coil and a Rx surface coil array were used.},
  language  = {en}
}
@inproceedings{Naujokat2012,
  author    = {Naujokat, Anke},
  title     = {Leon Battista Alberti and the consonance of old and new},
  series = {Proceedings of the 2nd International conference of the European Architectural History Network, Brussels 31 May - 2 June 2012},
  booktitle = {Proceedings of the 2nd International conference of the European Architectural History Network, Brussels 31 May - 2 June 2012},
  editor    = {Heynen, Hilde and Gosseye, Janina},
  publisher = {KVAB},
  address   = {Br{\"u}ssel},
  organization    = {European Architectural History Network},
  isbn      = {978-90-6569-102-6},
  pages     = {182 -- 184},
  year      = {2012},
  language  = {de}
}
@misc{SiegertSchwanebergMartinezMoyaetal.2012,
  author    = {Siegert, Petra and Schwaneberg, Ulrich and Martinez Moya, Ronny and Merkel, Marion and Spitz, Astrid and Wieland, Susanne and Hellmuth, Hendrik and Maurer, Karl-Heinz},
  title     = {Leistungsverbesserte Proteasevariante [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt / WIPO},
  address   = {M{\"u}nchen / Den Hague / Genf},
  pages     = {1 -- 29},
  year      = {2012},
  language  = {de}
}
@article{ReisgenOlschokJakobsetal.2012,
  author    = {Reisgen, Uwe and Olschok, Simon and Jakobs, Stefan and Schleser, Markus and Mokrov, Oleg and Rossiter, Eduardo},
  title     = {Laser beam submerged arc hybrid welding},
  series = {Physics procedia},
  volume    = {39},
  journal   = {Physics procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.016},
  pages     = {75 -- 83},
  year      = {2012},
  abstract  = {The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.},
  language  = {en}
}
@article{AbouzarPoghossianCherstvyetal.2012,
  author    = {Abouzar, Maryam H. and Poghossian, Arshak and Cherstvy, Andrey G. and Pedraza, Angela M. and Ingebrandt, Sven and Sch{\"o}ning, Michael Josef},
  title     = {Label-free electrical detection of DNA by means of field-effect nanoplate capacitors: Experiments and modeling},
  series = {Physica Status Solidi (a)},
  volume    = {209},
  journal   = {Physica Status Solidi (a)},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201100710},
  pages     = {925 -- 934},
  year      = {2012},
  abstract  = {Label-free electrical detection of consecutive deoxyribonucleic acid (DNA) hybridization/denaturation by means of an array of individually addressable field-effect-based nanoplate silicon-on-insulator (SOI) capacitors modified with gold nanoparticles (Au-NP) is investigated. The proposed device detects charge changes on Au-NP/DNA hybrids induced by the hybridization or denaturation event. DNA hybridization was performed in a high ionic-strength solution to provide a high hybridization efficiency. On the other hand, to reduce the screening of the DNA charge by counter ions and to achieve a high sensitivity, the sensor signal induced by the hybridization and denaturation events was measured in a low ionic-strength solution. High sensor signals of about 120, 90, and 80 mV were registered after the DNA hybridization, denaturation, and re-hybridization events, respectively. Fluorescence microscopy has been applied as reference method to verify the DNA immobilization, hybridization, and denaturation processes. An electrostatic charge-plane model for potential changes at the gate surface of a nanoplate field-effect sensor induced by the DNA hybridization has been developed taking into account both the Debye length and the distance of the DNA charge from the gate surface.},
  language  = {en}
}