@masterthesis{Koc2021,
  type      = {Bachelor Thesis},
  author    = {Koc, {\"O}zge Fethiye},
  title     = {OFEKO: Lehrmaterial f{\"u}r sehbehinderte Kinder},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {117 Seiten},
  year      = {2021},
  abstract  = {In einer Mischklasse, bestehend aus sehenden und nicht-sehenden Kindern, welche nicht schriftlich oder spielerisch miteinander kommunizieren k{\"o}nnen, gehen einige soziale Aspekte und Lern{\"u}bungen verloren. Partnerarbeiten und das gegenseitige Kontrollieren der Richtigkeit, beispielsweise bei der Anwendung von Satzzeichen, sind M{\"o}glichkeiten, welche die Kinder ohne ein gemeinsames Material nicht wahrnehmen k{\"o}nnen. Diese Arbeit erm{\"o}glicht ein gemeinsames Arbeiten aller Kinder durch dasselbe Material. Hierf{\"u}r dienen dreidimensionale Objekte, welche im STL-Dateiformat zur Verf{\"u}gung stehen. Es eignet sich f{\"u}r schriftliche und geografische Arbeiten. Des Weiteren ist ein Memory-Spiel enthalten, welches ebenso von sehenden und nicht-sehenden Kinder gespielt werden kann. Diese STLs k{\"o}nnen weltweit verschickt werden, sodass diese beliebig mit einem 3D-Drucker gedruckt werden k{\"o}nnen.},
  language  = {de}
}
@masterthesis{Kiutsukis2021,
  type      = {Bachelor Thesis},
  author    = {Kiutsukis, Maria},
  title     = {KOMU: Entwicklung eines modularen Regalsystems},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {213 Seiten},
  year      = {2021},
  abstract  = {KOMU entstand durch Analysieren der Ver{\"a}nderungen, die mit der Urbanisierung einhergehen - schnell schwindender Wohnraum, h{\"a}ufiges Umziehen und verschmolzene Raumnutzung. KOMU ist ein modulares Regalsystem, das erm{\"o}glicht, problemlos aus denselben Bestandteilen immer wieder verschiedene Wohn- und Raumsituationen zu schaffen. Das System ist komplett werkzeugfrei durch simples Ineinanderstecken aufzubauen. Weitere Add-Ons k{\"o}nnen {\"u}ber das gleiche Stecksystem in das Regal integriert werden, damit es perfekt an die Bed{\"u}rfnisse des Kunden anpasst werden kann. Durch klare Linien und eine cleane Designsprache f{\"u}gt sich KOMU nahtlos in seine Umgebung ein und hilft, eine f{\"u}r den Kunden ideale Umgebung zu schaffen. Ein Regal, das mitw{\"a}chst - vielf{\"a}ltig und individuell.},
  language  = {de}
}
@masterthesis{Khalaimova2021,
  type      = {Bachelor Thesis},
  author    = {Khalaimova, Karina},
  title     = {Neuerfindung der Ligaturen},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {43 Seiten},
  year      = {2021},
  abstract  = {Gegenstand des Projekts ist, Ligaturen als erweiterte Mittel der Informations{\"u}bertragung einzusetzen. Ligaturen als zus{\"a}tzliches Instrument sollen die visuelle Komponente des Textes unterst{\"u}tzen, ihm die gewisse Frische einhauchen und ihn hiermit insgesamt sichtbarer, origineller und moderner machen. Der Einsatzbereich erstreckt sich hierbei in die verschiedensten Bereiche hin {\"u}ber Design und Werbung, als auch im Handel oder in sozialen Bereichen. Hierbei kann eine große Anzahl an W{\"o}rtern neue Formen annehmen und mithin an neuem Leben und Bedeutung gewinnen, was sicherlich die allgemeinen Sprachmittel bereichern wird. Auf einer historischen Basis und mit Hilfe der Dekonstruktion wurden neue Formen der Ligaturen geschaffen — seltsame, kontroverse, auff{\"a}llige und einzigartige.},
  language  = {de}
}
@masterthesis{Kober2021,
  type      = {Bachelor Thesis},
  author    = {Kober, Sophie},
  title     = {DO or DIE: Leistungssport},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {81 Seiten},
  year      = {2021},
  abstract  = {Es ist dieser eine Moment, der {\"u}ber Versagen oder Erfolg entscheidet. Dieser Augenblick, der so unfassbar wichtig ist und dennoch nicht mal eine Sekunde dauert. Als Leistungssportler bereitet man sich immer und immer wieder auf diesen einen Moment vor. Wie unterscheidet sich dieser Moment in verschiedenen Sportarten? Gibt es ihn {\"u}berhaupt in jeder Sportart? Das Projekt „Do or Die" fokussiert sich auf entscheidende und wichtige Situationen in unterschiedlichen Sportarten und zeigt dabei die Facetten und Vielseitigkeit des Leistungssports auf. In einem besonderen Konzept wird der Fokus auf genau diese Momente gelegt und greift den Aspekt des Scheiterns und Erfolgs auf. Es wird untersucht, wie sichtbar diese Augenblicke nach außen hin sind oder inwiefern entscheidende Momente auch nur im Kopf stattfinden und durch Emotionen zu erkennen sind.},
  language  = {de}
}
@article{BrockhausBehbahaniMurisetal.2021,
  author    = {Brockhaus, Moritz K. and Behbahani, Mehdi and Muris, Farina and Jansen, Sebastian V. and Schmitz-Rode, Thomas and Steinseifer, Ulrich and Clauser, Johanna C.},
  title     = {In vitro thrombogenicity testing of pulsatile mechanical circulatory support systems: Design and proof-of-concept},
  series = {Artificial Organs},
  volume    = {45},
  journal   = {Artificial Organs},
  number    = {12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1525-1594},
  doi       = {10.1111/aor.14046},
  pages     = {1513 -- 1521},
  year      = {2021},
  abstract  = {Thrombogenic complications are a main issue in mechanical circulatory support (MCS). There is no validated in vitro method available to quantitatively assess the thrombogenic performance of pulsatile MCS devices under realistic hemodynamic conditions. The aim of this study is to propose a method to evaluate the thrombogenic potential of new designs without the use of complex in-vivo trials. This study presents a novel in vitro method for reproducible thrombogenicity testing of pulsatile MCS systems using low molecular weight heparinized porcine blood. Blood parameters are continuously measured with full blood thromboelastometry (ROTEM; EXTEM, FIBTEM and a custom-made analysis HEPNATEM). Thrombus formation is optically observed after four hours of testing. The results of three experiments are presented each with two parallel loops. The area of thrombus formation inside the MCS device was reproducible. The implantation of a filter inside the loop catches embolizing thrombi without a measurable increase of platelet activation, allowing conclusions of the place of origin of thrombi inside the device. EXTEM and FIBTEM parameters such as clotting velocity (α) and maximum clot firmness (MCF) show a total decrease by around 6\% with a characteristic kink after 180 minutes. HEPNATEM α and MCF rise within the first 180 minutes indicate a continuously increasing activation level of coagulation. After 180 minutes, the consumption of clotting factors prevails, resulting in a decrease of α and MCF. With the designed mock loop and the presented protocol we are able to identify thrombogenic hot spots inside a pulsatile pump and characterize their thrombogenic potential.},
  language  = {en}
}
@inproceedings{ChajanSchulteTiggesRekeetal.2021,
  author    = {Chajan, Eduard and Schulte-Tigges, Joschua and Reke, Michael and Ferrein, Alexander and Matheis, Dominik and Walter, Thomas},
  title     = {GPU based model-predictive path control for self-driving vehicles},
  series = {IEEE Intelligent Vehicles Symposium (IV)},
  booktitle = {IEEE Intelligent Vehicles Symposium (IV)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-1-7281-5394-0},
  doi       = {10.1109/IV48863.2021.9575619},
  pages     = {1243 -- 1248},
  year      = {2021},
  abstract  = {One central challenge for self-driving cars is a proper path-planning. Once a trajectory has been found, the next challenge is to accurately and safely follow the precalculated path. The model-predictive controller (MPC) is a common approach for the lateral control of autonomous vehicles. The MPC uses a vehicle dynamics model to predict the future states of the vehicle for a given prediction horizon. However, in order to achieve real-time path control, the computational load is usually large, which leads to short prediction horizons. To deal with the computational load, the control algorithm can be parallelized on the graphics processing unit (GPU). In contrast to the widely used stochastic methods, in this paper we propose a deterministic approach based on grid search. Our approach focuses on systematically discovering the search area with different levels of granularity. To achieve this, we split the optimization algorithm into multiple iterations. The best sequence of each iteration is then used as an initial solution to the next iteration. The granularity increases, resulting in smooth and predictable steering angle sequences. We present a novel GPU-based algorithm and show its accuracy and realtime abilities with a number of real-world experiments.},
  language  = {en}
}
@article{StaeudleSeynnesLapsetal.2021,
  author    = {St{\"a}udle, Benjamin and Seynnes, Olivier and Laps, Guido and G{\"o}ll, Fabian and Br{\"u}ggemann, Gert-Peter and Albracht, Kirsten},
  title     = {Recovery from achilles tendon repair: a combination of Postsurgery Outcomes and Insufficient remodeling of muscle and tendon},
  series = {Medicine \& Science in Sports \& Exercise},
  volume    = {53},
  journal   = {Medicine \& Science in Sports \& Exercise},
  number    = {7},
  publisher = {American College of Sports Medicine},
  address   = {Philadelphia, Pa.},
  issn      = {1530-0315},
  doi       = {10.1249/MSS.0000000000002592},
  pages     = {1356 -- 1366},
  year      = {2021},
  abstract  = {Achilles tendon rupture (ATR) patients have persistent functional deficits in the triceps surae muscle-tendon unit (MTU). The complex remodeling of the MTU accompanying these deficits remains poorly understood. The purpose of the present study was to associate in vivo and in silico data to investigate the relations between changes inMTU properties and strength deficits inATR patients. Methods: Elevenmale subjects who had undergone surgical repair of complete unilateral ATR were examined 4.6 ± 2.0 (mean ± SD) yr after rupture. Gastrocnemius medialis (GM) tendon stiffness, morphology, and muscle architecture were determined using ultrasonography. The force-length relation of the plantar flexor muscles was assessed at five ankle joint angles. In addition, simulations (OpenSim) of the GM MTU force-length properties were performed with various iterations of MTU properties found between the unaffected and the affected side. Results: The affected side of the patients displayed a longer, larger, and stiffer GM tendon (13\% ± 10\%, 105\% ± 28\%, and 54\% ± 24\%, respectively) compared with the unaffected side. The GM muscle fascicles of the affected side were shorter (32\% ± 12\%) and with greater pennation angles (31\% ± 26\%). A mean deficit in plantarflexion moment of 31\% ± 10\% was measured. Simulations indicate that pairing an intact muscle with a longer tendon shifts the optimal angular range of peak force outside physiological angular ranges, whereas the shorter muscle fascicles and tendon stiffening seen in the affected side decrease this shift, albeit incompletely. Conclusions: These results suggest that the substantial changes in MTU properties found in ATR patients may partly result from compensatory remodeling, although this process appears insufficient to fully restore muscle function.},
  language  = {en}
}
@article{SaretzkiBergmannDahmannetal.2021,
  author    = {Saretzki, Charlotte and Bergmann, Ole and Dahmann, Peter and Janser, Frank and Keimer, Jona and Machado, Patricia and Morrison, Audry and Page, Henry and Pluta, Emil and St{\"u}bing, Felix and K{\"u}pper, Thomas},
  title     = {Are small airplanes safe with regards to COVID-19 transmission?},
  series = {Journal of Travel Medicine},
  volume    = {28},
  journal   = {Journal of Travel Medicine},
  number    = {7},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1708-8305},
  doi       = {10.1093/jtm/taab105},
  year      = {2021},
  language  = {en}
}
@inproceedings{PfeifferBalcGebhardt2021,
  author    = {Pfeiffer, Johann and Balc, Nicolae and Gebhardt, Andreas},
  title     = {Studie zur Untersuchung der Auswirkung von Fr{\"a}sbahnstrategien auf die Oberfl{\"a}chenqualit{\"a}t von mittels SLM gefertigten Metallteilen},
  series = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  booktitle = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  publisher = {Verlag Ernst-Abbe-Hochschule Jena},
  address   = {Jena},
  isbn      = {978-3-932886-36-2},
  pages     = {99 -- 102},
  year      = {2021},
  abstract  = {F{\"u}r die Herstellung von metallischen Bauteilen wird in der heutigen Zeit eine Vielzahl von Verfahren auf dem Markt angeboten. Dabei stehen die additiven im Wettbewerb zu den konventionellen Verfahren. Die erreichbaren Oberfl{\"a}chenqualit{\"a}ten der additiven sind nicht mit denen spanender Verfahren vergleichbar. F{\"u}r diesen Beitrag wurde analysiert, ob sich ein mittels Selektivem Laserschmelzen (SLM) additiv hergestellter Edelstahl hinsichtlich seiner Oberfl{\"a}chenqualit{\"a}t nach der Zerspanung von einem umgeformten konventionell hergestellten Edelstahl gleicher Sorte unterscheidet.},
  language  = {de}
}
@article{BallVoegeleGrajewskietal.2021,
  author    = {Ball, Christopher Stephen and V{\"o}gele, Stefan and Grajewski, Matthias and Kuckshinrichs, Wilhelm},
  title     = {E-mobility from a multi-actor point of view: Uncertainties and their impacts},
  series = {Technological Forecasting and Social Change},
  volume    = {170},
  journal   = {Technological Forecasting and Social Change},
  number    = {Art. 120925},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0040-1625},
  doi       = {10.1016/j.techfore.2021.120925},
  year      = {2021},
  language  = {en}
}
@article{GermanMikuckiWelchetal.2021,
  author    = {German, Laura and Mikucki, Jill A. and Welch, Susan A. and Welch, Kathleen A. and Lutton, Anthony and Dachwald, Bernd and Kowalski, Julia and Heinen, Dirk and Feldmann, Marco and Francke, Gero and Espe, Clemens and Lyons, W. Berry},
  title     = {Validation of sampling antarctic subglacial hypersaline waters with an electrothermal ice melting probe (IceMole) for environmental analytical geochemistry},
  series = {International Journal of Environmental Analytical Chemistry},
  volume    = {101},
  journal   = {International Journal of Environmental Analytical Chemistry},
  number    = {15},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {0306-7319},
  doi       = {10.1080/03067319.2019.1704750},
  pages     = {2654 -- 2667},
  year      = {2021},
  abstract  = {Geochemical characterisation of hypersaline waters is difficult as high concentrations of salts hinder the analysis of constituents at low concentrations, such as trace metals, and the collection of samples for trace metal analysis in natural waters can be easily contaminated. This is particularly the case if samples are collected by non-conventional techniques such as those required for aquatic subglacial environments. In this paper we present the first analysis of a subglacial brine from Taylor Valley, (~ 78°S), Antarctica for the trace metals: Ba, Co, Mo, Rb, Sr, V, and U. Samples were collected englacially using an electrothermal melting probe called the IceMole. This probe uses differential heating of a copper head as well as the probe's sidewalls and an ice screw at the melting head to move through glacier ice. Detailed blanks, meltwater, and subglacial brine samples were collected to evaluate the impact of the IceMole and the borehole pump, the melting and collection process, filtration, and storage on the geochemistry of the samples collected by this device. Comparisons between melt water profiles through the glacier ice and blank analysis, with published studies on ice geochemistry, suggest the potential for minor contributions of some species Rb, As, Co, Mn, Ni, NH4+, and NO2-+NO3- from the IceMole. The ability to conduct detailed chemical analyses of subglacial fluids collected with melting probes is critical for the future exploration of the hundreds of deep subglacial lakes in Antarctica.},
  language  = {en}
}
@article{SpietzSproewitzSeefeldtetal.2021,
  author    = {Spietz, Peter and Spr{\"o}witz, Tom and Seefeldt, Patric and Grundmann, Jan Thimo and Jahnke, Rico and Mikschl, Tobias and Mikulz, Eugen and Montenegro, Sergio and Reershemius, Siebo and Renger, Thomas and Ruffer, Michael and Sasaki, Kaname and Sznajder, Maciej and T{\´o}th, Norbert and Ceriotti, Matteo and Dachwald, Bernd and Macdonald, Malcolm and McInnes, Colin and Seboldt, Wolfgang and Quantius, Dominik and Bauer, Waldemar and Wiedemann, Carsten and Grimm, Christian D. and Hercik, David and Ho, Tra-Mi and Lange, Caroline and Schmitz, Nicole},
  title     = {Paths not taken - The Gossamer roadmap's other options},
  series = {Advances in Space Research},
  volume    = {67},
  journal   = {Advances in Space Research},
  number    = {9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  doi       = {10.1016/j.asr.2021.01.044},
  pages     = {2912 -- 2956},
  year      = {2021},
  language  = {en}
}
@inproceedings{GrundmannBorellaCeriottietal.2021,
  author    = {Grundmann, Jan Thimo and Borella, Laura and Ceriotti, Matteo and Chand, Suditi and Cordero, Federico and Dachwald, Bernd and Fexer, Sebastian and Grimm, Christian D. and Hendrikse, Jeffrey and Herč{\´i}k, David and Herique, Alain and Hillebrandt, Martin and Ho, Tra-Mi and Kesseler, Lars and Laabs, Martin and Lange, Caroline and Lange, Michael and Lichtenheldt, Roy and McInnes, Colin R. and Moore, Iain and Peloni, Alessandro and Plettenmeier, Dirk and Quantius, Dominik and Seefeldt, Patric and Venditti, Flaviane c. F. and Vergaaij, Merel and Viavattene, Giulia and Virkki, Anne K. and Zander, Martin},
  title     = {More bucks for the bang: new space solutions, impact tourism and one unique science \& engineering opportunity at T-6 months and counting},
  series = {7th IAA Planetary Defense Conference},
  booktitle = {7th IAA Planetary Defense Conference},
  year      = {2021},
  abstract  = {For now, the Planetary Defense Conference Exercise 2021's incoming fictitious(!), asteroid, 2021 PDC, seems headed for impact on October 20th, 2021, exactly 6 months after its discovery. Today (April 26th, 2021), the impact probability is 5\%, in a steep rise from 1 in 2500 upon discovery six days ago. We all know how these things end. Or do we? Unless somebody kicked off another headline-grabbing media scare or wants to keep civil defense very idle very soon, chances are that it will hit (note: this is an exercise!). Taking stock, it is barely 6 months to impact, a steadily rising likelihood that it will actually happen, and a huge uncertainty of possible impact energies: First estimates range from 1.2 MtTNT to 13 GtTNT, and this is not even the worst-worst case: a 700 m diameter massive NiFe asteroid (covered by a thin veneer of Ryugu-black rubble to match size and brightness), would come in at 70 GtTNT. In down to Earth terms, this could be all between smashing fireworks over some remote area of the globe and a 7.5 km crater downtown somewhere. Considering the deliberate and sedate ways of development of interplanetary missions it seems we can only stand and stare until we know well enough where to tell people to pack up all that can be moved at all and save themselves. But then, it could just as well be a smaller bright rock. The best estimate is 120 m diameter from optical observation alone, by 13\% standard albedo. NASA's upcoming DART mission to binary asteroid (65803) Didymos is designed to hit such a small target, its moonlet Dimorphos. The Deep Impact mission's impactor in 2005 successfully guided itself to the brightest spot on comet 9P/Tempel 1, a relatively small feature on the 6 km nucleus. And 'space' has changed: By the end of this decade, one satellite communication network plans to have launched over 11000 satellites at a pace of 60 per launch every other week. This level of series production is comparable in numbers to the most prolific commercial airliners. Launch vehicle production has not simply increased correspondingly - they can be reused, although in a trade for performance. Optical and radio astronomy as well as planetary radar have made great strides in the past decade, and so has the design and production capability for everyday 'high-tech' products. 60 years ago, spaceflight was invented from scratch within two years, and there are recent examples of fast-paced space projects as well as a drive towards 'responsive space'. It seems it is not quite yet time to abandon all hope. We present what could be done and what is too close to call once thinking is shoved out of the box by a clear and present danger, to show where a little more preparedness or routine would come in handy - or become decisive. And if we fail, let's stand and stare safely and well instrumented anywhere on Earth together in the greatest adventure of science.},
  language  = {en}
}