@masterthesis{Shafaghi2023,
  type      = {Bachelor Thesis},
  author    = {Shafaghi, Shiva},
  title     = {Zan, Zendegi, Azadi},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {66 Seiten},
  year      = {2023},
  abstract  = {Das Projekt „Zan, Zendegi, Azadi" (Frau, Leben, Freiheit) setzt sich mit der aktuellen Situation im Iran auseinander. Bereits nach der Macht{\"u}bernahme der islamischen Republik im Jahr 1979 wird die iranische Bev{\"o}lkerung durch das brutale Regime unterdr{\"u}ckt und zum Schweigen gezwungen. Dieser Druck hat sich lange aufgestaut und nun gibt es seit Jahren in gr{\"o}ßeren Abst{\"a}nden Proteste gegen die Regierung. Der gewaltsame Tod der kurdischen Iranerin Mahsā J{\^i}na Amīnī in Polizeigewahrsam am 16.09.2022 hat eine beispiellose Welle des Protests in allen Landesteilen Irans ausgel{\"o}st. Ihr Protest wird von Frauen angef{\"u}hrt und hat sich in eine beeindruckende Welle des Widerstands und der Rebellion entwickelt. Die unterschiedlichen Medien in diesem Projekt wie Dokumentarfotografie, Illustration, Projektion und Texte geben Betrachter:innen einen Eindruck der unmittelbaren Wirkung der revolution{\"a}ren Ereignisse und der Reaktion des totalit{\"a}ren Regimes auf die Betroffenen.},
  language  = {de}
}
@masterthesis{Stollenwerk2023,
  type      = {Bachelor Thesis},
  author    = {Stollenwerk, Hannah},
  title     = {Rabbit Hole : welchen Einfluss digitale Plattformen auf rechte Radikalisierungsprozesse haben},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {141 Seiten},
  year      = {2023},
  abstract  = {Obwohl 2019 als das Jahr rechtsterroristischer Anschl{\"a}ge weltweit gilt und die rechte Szene in den letzten Jahren auch in der gesellschaftlichen Mitte deutlich an Zuwachs gewinnen konnte, ist das Thema rund um rechtsextreme Online-Radikalisierung noch verh{\"a}ltnism{\"a}ßig wenig erforscht. Laut Expert*innen ist dabei jeder Mensch potenziell f{\"u}r eine Radikalisierung anf{\"a}llig, wenn es die Umst{\"a}nde beg{\"u}nstigen. Dass unsere Leben on- und offline immer weiter miteinander verschmelzen, erh{\"o}ht die Gefahr f{\"u}r eine m{\"o}gliche Radikalisierung zus{\"a}tzlich. »Rabbit Hole« wurde als monothematisch erscheinende Bookazine-Reihe konzipiert, welche pro Ausgabe ein Thema rund um die Gefahren, Herausforderungen und Ph{\"a}nomene, die das Internet und digitale Plattformen mit sich bringen, beleuchtet. Sie soll zur Aufkl{\"a}rung von insbesondere jungen Erwachsenen beitragen. Die erste Ausgabe wurde beispielhaft ausgearbeitet.},
  language  = {de}
}
@masterthesis{Tappert2023,
  type      = {Bachelor Thesis},
  author    = {Tappert, Celine},
  title     = {Die Zukunft des Energiemanagements : ein modulares Konzept und Design f{\"u}r verschiedene Nutzergruppen.},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {251 Seiten},
  year      = {2023},
  abstract  = {Enma ist eine Energiemanagement-Anwendung, die verschiedene Nutzer:innengruppen zusammenf{\"u}hrt und damit den Prozess vereinfacht. Die aktuelle Energiekrise betrifft insbesondere Unternehmen, die in der Energieerzeugung t{\"a}tig sind. Die Digitalisierung wird f{\"u}r Unternehmen in der Zukunft immer wichtiger und sie werden sich ihr nicht entziehen k{\"o}nnen. Daher ben{\"o}tigen insbesondere Unternehmen, die keinen dedizierten Energiemanager:innen besch{\"a}ftigen, gezielte Unterst{\"u}tzung von Anwendungen. Auch Vertriebspartner:innen und Hersteller:innen von Produkten wie PV-Anlagen und Stromspeichern, die von solch einer Anwendung profitieren k{\"o}nnen, wollen ihren Kunden:innen Sicherheit und Unterst{\"u}tzung bieten. Daf{\"u}r ist eine Anwendung erforderlich, die dies vereint. Das Ziel war es, das Backend von OpenEMS (Energiemanagementsystems) zu nutzen und zus{\"a}tzlich einen menschenzentrierten und umweltfreundlichen Ansatz zu bieten. Um die Anwendung realistischer zu gestalten, wurde sie in Kooperation mit dem Unternehmen Voltfang entwickelt.},
  language  = {de}
}
@masterthesis{Tran2023,
  type      = {Bachelor Thesis},
  author    = {Tran, Hui Ming},
  title     = {Das Haus des Meeres : Entwicklung und Konzeption eines neuen Erscheinungsbildes f{\"u}r den Aqua Terra Zoo},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {115 Seiten},
  year      = {2023},
  abstract  = {Im Zentrum von Wien befindet sich in einem ehemaligen Flakturm aus dem 2. Weltkrieg, das Haus des Meeres. Auf ca 5000m2 beherbergen sie ca. 10.000 Tiere. Der Fokus liegt dabei auf die Unterwasserwelt und bietet einen ausgiebigen Einblick in die Welt der Meere. Das neue Erscheinungsbild positioniert die private und gemeinn{\"u}tzige Einrichtung sowohl als Ort des Zusammenkommens als auch der Wissensvermittlung. Dabei soll das Designkonzept vor dem Betreten des Zoos seine besondere Baukonstruktion aufzeigen und von Anfang an die Tiefe sowie Tiefenzonen der Meere einbeziehen. Damit distanzieren sie sich entscheidend von {\"a}hnlichen Institutionen. Inspiriert von der Teilung zwischen der Oberfl{\"a}che und dem Meer, entstand eine feine abstrakte Skala. Diese visualisiert den Meeresspiegel mit seiner Tiefe und dient medien{\"u}bergreifend als Orientierungshilfe.},
  language  = {de}
}
@incollection{Laack2023,
  author    = {Laack, Walter van},
  title     = {Nahtoderfahrungen, Sterben und Tod aus der Perspektive von Medizin, Naturwissenschaften und Philosophie},
  series = {Thanatologie im deutschsprachigen Raum - Interdisziplin{\"a}re Perspektiven},
  booktitle = {Thanatologie im deutschsprachigen Raum - Interdisziplin{\"a}re Perspektiven},
  editor    = {Ortmanns, Bruno and Brauers, Angelika},
  publisher = {Rediroma-Verlag},
  isbn      = {978-3-98527-661-5},
  pages     = {129 -- 139},
  year      = {2023},
  language  = {de}
}
@masterthesis{Trautmann2023,
  type      = {Bachelor Thesis},
  author    = {Trautmann, Christina},
  title     = {Dirty Air},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {99 Seiten},
  year      = {2023},
  abstract  = {Die Formel 1 ist ein Extremsport und soll wie viele andere Wettbewerbe in diesem Bereich unterhalten. Die Konkurrenz unter den Fahrern ist jederzeit pr{\"a}sent, jedoch das dadurch steigende Gefahrenpotenzial nicht. In der Graphic Novel „Dirty Air" wir auf Basis eines dokumentarisch-informativen Ansatzes aufgezeigt, inwiefern die Rivalit{\"a}t zweier Fahrer Auswirkungen auf die Sicherheit des Sports haben kann. Es wird {\"u}ber die wichtigsten Ereignisse der Saison 2021 erz{\"a}hlt, die beispielhaft daf{\"u}r stehen, wie sich der Wettbewerb zuspitzen kann. Die Geschehnisse sind realen Gegebenheiten nachempfunden und illustrativ umgesetzt. Ziel der Arbeit ist es, die Leser*innen zum Nachdenken anzuregen und Verst{\"a}ndnis zu schaffen. Rivalit{\"a}ten sind wichtig und notwendig im Sport, sollten jedoch kein Anker f{\"u}r Hass und un{\"u}berlegte Risiken sein, egal ob innerhalb des Fahrerlagers oder der Fangemeinschaft.},
  language  = {de}
}
@article{DigelAkimbekovRogachevetal.2023,
  author    = {Digel, Ilya and Akimbekov, Nuraly S. and Rogachev, Evgeniy and Pogorelova, Natalia},
  title     = {Bacterial cellulose produced by Medusomyces gisevii on glucose and sucrose: biosynthesis and structural properties},
  series = {Cellulose},
  journal   = {Cellulose},
  publisher = {Springer Science + Business Media},
  address   = {Dordrecht},
  issn      = {1572-882X (Online)},
  doi       = {10.1007/s10570-023-05592-z},
  pages     = {15 Seiten},
  year      = {2023},
  abstract  = {In this work, the effects of carbon sources and culture media on the production and structural properties of bacterial cellulose (BC) synthesized by Medusomyces gisevii have been studied. The culture medium was composed of different initial concentrations of glucose or sucrose dissolved in 0.4\% extract of plain green tea. Parameters of the culture media (titratable acidity, substrate conversion degree etc.) were monitored daily for 20 days of cultivation. The BC pellicles produced on different carbon sources were characterized in terms of biomass yield, crystallinity and morphology by field emission scanning electron microscopy (FE-SEM), atomic force microscopy and X-ray diffraction. Our results showed that Medusomyces gisevii had higher BC yields in media with sugar concentrations close to 10 g L-1 after a 18-20 days incubation period. Glucose in general lead to a higher BC yield (173 g L-1) compared to sucrose (163.5 g L-1). The BC crystallinity degree and surface roughness were higher in the samples synthetized from sucrose. Obtained FE-SEM micrographs show that the BC pellicles synthesized in the sucrose media contained densely packed tangles of cellulose fibrils whereas the BC produced in the glucose media displayed rather linear geometry of the BC fibrils without noticeable aggregates.},
  language  = {en}
}
@article{ThomessenThomaBraun2023,
  author    = {Thomessen, Karolin and Thoma, Andreas and Braun, Carsten},
  title     = {Bio-inspired altitude changing extension to the 3DVFH* local obstacle avoidance algorithm},
  series = {CEAS Aeronautical Journal},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Wien},
  issn      = {1869-5590 (Online)},
  doi       = {10.1007/s13272-023-00691-w},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {Obstacle avoidance is critical for unmanned aerial vehicles (UAVs) operating autonomously. Obstacle avoidance algorithms either rely on global environment data or local sensor data. Local path planners react to unforeseen objects and plan purely on local sensor information. Similarly, animals need to find feasible paths based on local information about their surroundings. Therefore, their behavior is a valuable source of inspiration for path planning. Bumblebees tend to fly vertically over far-away obstacles and horizontally around close ones, implying two zones for different flight strategies depending on the distance to obstacles. This work enhances the local path planner 3DVFH* with this bio-inspired strategy. The algorithm alters the goal-driven function of the 3DVFH* to climb-preferring if obstacles are far away. Prior experiments with bumblebees led to two definitions of flight zone limits depending on the distance to obstacles, leading to two algorithm variants. Both variants reduce the probability of not reaching the goal of a 3DVFH* implementation in Matlab/Simulink. The best variant, 3DVFH*b-b, reduces this probability from 70.7 to 18.6\% in city-like worlds using a strong vertical evasion strategy. Energy consumption is higher, and flight paths are longer compared to the algorithm version with pronounced horizontal evasion tendency. A parameter study analyzes the effect of different weighting factors in the cost function. The best parameter combination shows a failure probability of 6.9\% in city-like worlds and reduces energy consumption by 28\%. Our findings demonstrate the potential of bio-inspired approaches for improving the performance of local path planning algorithms for UAV.},
  language  = {en}
}
@article{SildatkeKarwanniKraftetal.2023,
  author    = {Sildatke, Michael and Karwanni, Hendrik and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {A distributed microservice architecture pattern for the automated generation of information extraction pipelines},
  series = {SN Computer Science},
  journal   = {SN Computer Science},
  number    = {4, Article number: 833},
  publisher = {Springer Singapore},
  address   = {Singapore},
  issn      = {2661-8907},
  doi       = {10.1007/s42979-023-02256-4},
  pages     = {19 Seiten},
  year      = {2023},
  abstract  = {Companies often build their businesses based on product information and therefore try to automate the process of information extraction (IE). Since the information source is usually heterogeneous and non-standardized, classic extract, transform, load techniques reach their limits. Hence, companies must implement the newest findings from research to tackle the challenges of process automation. They require a flexible and robust system that is extendable and ensures the optimal processing of the different document types. This paper provides a distributed microservice architecture pattern that enables the automated generation of IE pipelines. Since their optimal design is individual for each input document, the system ensures the ad-hoc generation of pipelines depending on specific document characteristics at runtime. Furthermore, it introduces the automated quality determination of each available pipeline and controls the integration of new microservices based on their impact on the business value. The introduced system enables fast prototyping of the newest approaches from research and supports companies in automating their IE processes. Based on the automated quality determination, it ensures that the generated pipelines always meet defined business requirements when they come into productive use.},
  language  = {en}
}
@article{AlnemerKotliarNeuhausetal.2023,
  author    = {Alnemer, Momin Sami Mohammad and Kotliar, Konstantin and Neuhaus, Valentin and Pape, Hans-Christoph and Ciritsis, Bernhard D.},
  title     = {Cost-effectiveness analysis of surgical proximal femur fracture prevention in elderly: a Markov cohort simulation model},
  series = {Cost Effectiveness and Resource Allocation},
  journal   = {Cost Effectiveness and Resource Allocation},
  number    = {21, Article number: 77},
  publisher = {Springer Nature},
  issn      = {1478-7547},
  doi       = {10.1186/s12962-023-00482-4},
  pages     = {12 Seiten},
  year      = {2023},
  abstract  = {Background Hip fractures are a common and costly health problem, resulting in significant morbidity and mortality, as well as high costs for healthcare systems, especially for the elderly. Implementing surgical preventive strategies has the potential to improve the quality of life and reduce the burden on healthcare resources, particularly in the long term. However, there are currently limited guidelines for standardizing hip fracture prophylaxis practices. Methods This study used a cost-effectiveness analysis with a finite-state Markov model and cohort simulation to evaluate the primary and secondary surgical prevention of hip fractures in the elderly. Patients aged 60 to 90 years were simulated in two different models (A and B) to assess prevention at different levels. Model A assumed prophylaxis was performed during the fracture operation on the contralateral side, while Model B included individuals with high fracture risk factors. Costs were obtained from the Centers for Medicare \& Medicaid Services, and transition probabilities and health state utilities were derived from available literature. The baseline assumption was a 10\% reduction in fracture risk after prophylaxis. A sensitivity analysis was also conducted to assess the reliability and variability of the results. Results With a 10\% fracture risk reduction, model A costs between \$8,850 and \$46,940 per quality-adjusted life-year (\$/QALY). Additionally, it proved most cost-effective in the age range between 61 and 81 years. The sensitivity analysis established that a reduction of ≥ 2.8\% is needed for prophylaxis to be definitely cost-effective. The cost-effectiveness at the secondary prevention level was most sensitive to the cost of the contralateral side's prophylaxis, the patient's age, and fracture treatment cost. For high-risk patients with no fracture history, the cost-effectiveness of a preventive strategy depends on their risk profile. In the baseline analysis, the incremental cost-effectiveness ratio at the primary prevention level varied between \$11,000/QALY and \$74,000/QALY, which is below the defined willingness to pay threshold. Conclusion Due to the high cost of hip fracture treatment and its increased morbidity, surgical prophylaxis strategies have demonstrated that they can significantly relieve the healthcare system. Various key assumptions facilitated the modeling, allowing for adequate room for uncertainty. Further research is needed to evaluate health-state-associated risks.},
  language  = {en}
}
@article{JanusAchtsnichtDrinicetal.2023,
  author    = {Janus, Kevin Alexander and Achtsnicht, Stefan and Drinic, Aleksander and Kopp, Alexander and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Transient magnesium-based thin-film temperature sensor on a flexible, bioabsorbable substrate for future medical applications},
  series = {Applied Research},
  journal   = {Applied Research},
  number    = {Accepted manuscript},
  publisher = {Wiley-VCH},
  issn      = {2702-4288 (Print)},
  doi       = {10.1002/appl.202300102},
  pages     = {22 Seiten},
  year      = {2023},
  abstract  = {In this work, the bioabsorbable materials, namely fibroin, polylactide acid (PLA), magnesium and magnesium oxide are investigated for their application as transient, resistive temperature detectors (RTD). For this purpose, a thin-film magnesium-based meander-like electrode is deposited onto a flexible, bioabsorbable substrate (fibroin or PLA) and encapsulated (passivated) by additional magnesium oxide layers on top and below the magnesium-based electrode. The morphology of different layered RTDs is analyzed by scanning electron microscopy. The sensor performance and lifetime of the RTD is characterized both under ambient atmospheric conditions between 30°C and 43°C, and wet tissue-like conditions with a constant temperature regime of 37°C. The latter triggers the degradation process of the magnesium-based layers. The 3-layers RTDs on a PLA substrate could achieve a lifetime of 8.5 h. These sensors also show the best sensor performance under ambient atmospheric conditions with a mean sensitivity of 0.48 Ω/°C ± 0.01 Ω/°C.},
  language  = {en}
}
@article{KarschuckSchmidtAchtsnichtetal.2023,
  author    = {Karschuck, Tobias and Schmidt, Stefan and Achtsnicht, Stefan and Poghossian, Arshak and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Multiplexing system for automated characterization of a capacitive field-effect sensor array},
  series = {Physica Status Solidi A},
  volume    = {220},
  journal   = {Physica Status Solidi A},
  number    = {22},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6300 (Print)},
  doi       = {10.1002/pssa.202300265},
  pages     = {7 Seiten},
  year      = {2023},
  abstract  = {In comparison to single-analyte devices, multiplexed systems for a multianalyte detection offer a reduced assay time and sample volume, low cost, and high throughput. Herein, a multiplexing platform for an automated quasi-simultaneous characterization of multiple (up to 16) capacitive field-effect sensors by the capacitive-voltage (C-V) and the constant-capacitance (ConCap) mode is presented. The sensors are mounted in a newly designed multicell arrangement with one common reference electrode and are electrically connected to the impedance analyzer via the base station. A Python script for the automated characterization of the sensors executes the user-defined measurement protocol. The developed multiplexing system is tested for pH measurements and the label-free detection of ligand-stabilized, charged gold nanoparticles.},
  language  = {en}
}
@inproceedings{SteuerDankert2023,
  author    = {Steuer-Dankert, Linda},
  title     = {A crazy little thing called sustainability},
  series = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  booktitle = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  doi       = {10.21427/9CQR-VC94},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {Achieving the 17 Sustainable Development Goals (SDGs) set by the United Nations (UN) in 2015 requires global collaboration between different stakeholders. Industry, and in particular engineers who shape industrial developments, have a special role to play as they are confronted with the responsibility to holistically reflect sustainability in industrial processes. This means that, in addition to the technical specifications, engineers must also question the effects of their own actions on an ecological, economic and social level in order to ensure sustainable action and contribute to the achievement of the SDGs. However, this requires competencies that enable engineers to apply all three pillars of sustainability to their own field of activity and to understand the global impact of industrial processes. In this context, it is relevant to understand how industry already reflects sustainability and to identify competences needed for sustainable development.},
  language  = {en}
}
@masterthesis{Behrmann2023,
  type      = {Bachelor Thesis},
  author    = {Behrmann, Wieka},
  title     = {GLOW UP. : eine multifunktionale Kinderleuchte zur F{\"o}rderung der Selbstst{\"a}ndigkeit},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {154 Seiten},
  year      = {2023},
  abstract  = {Durch die Kombination von Merkmalen verschiedener Leuchtentypen erf{\"u}llt Glow up eine Vielzahl von Bed{\"u}rfnissen in unterschiedlichsten Szenarien. Bei einer Nachtwanderung erhellt sie den Weg oder sie spendet Geborgenheit, wenn Kinder sich vor der Dunkelheit beim Einschlafen f{\"u}rchten. Die Anpassbarkeit der Leuchte steht im Mittelpunkt und erm{\"o}glicht die Einstellung von Helligkeit und Lichttemperatur sowie den Wechsel zwischen direktem und indirektem Licht. Mit einer Vielzahl von Befestigungsm{\"o}glichkeiten, auswechselbaren Leuchtenschirmen und kindgerechtem Design ist "Glow up" ein wahres Multitalent und ein enger Begleiter im Alltag.},
  language  = {de}
}
@masterthesis{GarciaLange2023,
  type      = {Bachelor Thesis},
  author    = {Garcia Lange, Ayari},
  title     = {FIELDPRO : Integrated equipment system for traveling journalists},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {96 Seiten},
  year      = {2023},
  abstract  = {In today's ultra-connected world, the significance of audio-visual documentation is rapidly growing. Technological advancements have made it more accessible to obtain powerful and compact audio-visual equipment, thereby reducing the dependency on a larger team for the documentation process. This has favoured the development of what is known as backpack journalism. This project meets an unmet market need and presents an opportunity for innovative product development. It focuses on backpack journalists working in remote and challenging conditions with unpredictable transportation and working conditions. The proposed backpack design addresses both transport and working setups. Offering a robust and waterproof yet overall lightweight construction for easy equipment carrying, while also providing an extension of the workspace for essential gear.},
  language  = {de}
}
@inproceedings{HueningMund2023,
  author    = {H{\"u}ning, Felix and Mund, Cindy},
  title     = {Integration of agile development in standard labs},
  series = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  booktitle = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  doi       = {10.21427/NK4Z-WS73},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {In addition to the technical content, modern courses at university should also teach professional skills to enhance the competencies of students towards their future work. The competency driven approach including technical as well as professional skills makes it necessary to find a suitable way for the integration into the corresponding module in a scalable and flexible manner. Agile development, for example, is essential for the development of modern systems and applications and makes use of dedicated professional skills of the team members, like structured group dynamics and communication, to enable the fast and reliable development. This paper presents an easy to integrate and flexible approach to integrate Scrum, an agile development method, into the lab of an existing module. Due to the different role models of Scrum the students have an individual learning success, gain valuable insight into modern system development and strengthen their communication and organization skills. The approach is implemented and evaluated in the module Vehicle Systems, but it can be transferred easily to other technical courses as well. The evaluation of the implementation considers feedback of all stakeholders, students, supervisor and lecturers, and monitors the observations during project lifetime.},
  language  = {en}
}
@masterthesis{Oezmen2023,
  type      = {Bachelor Thesis},
  author    = {{\"O}zmen, Emel},
  title     = {ALIGN : ein adaptives Regalsystem},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {119 Seiten},
  year      = {2023},
  abstract  = {„ALIGN" ist ein smartes M{\"o}belsystem, das den individuellen Lebensstil und die Werte der heutigen Gesellschaft widerspiegelt. Es bietet ausreichend Stauraum und erm{\"o}glicht es, Objekte gezielt in Szene zu setzen oder in den Hintergrund zu r{\"u}cken. Das vielseitige System passt sich an unterschiedliche Raum- und Nutzungsszenarien an. Es erm{\"o}glicht die individuelle Gestaltung des Wohnraums nach pers{\"o}nlichen Vorlieben und hilft, den Herausforderungen des modernen Lebens gerecht zu werden. „ALIGN" - eine passende L{\"o}sung f{\"u}r jedes Problem.},
  language  = {de}
}
@article{ElBerguiAbouabdillahBouriougetal.2023,
  author    = {El Bergui, Omnia and Abouabdillah, Aziz and Bourioug, Mohamed and Schmitz, Dominik and Biel, Markus and Aboudrare, Abdellah and Krauss, Manuel and Jomaa, Ahlem and Romuli, Sebastian and M{\"u}ller, Joachim and Fagroud, Mustapha and Bouabid, Rachid},
  title     = {Innovative solutions for drought: Evaluating hydrogel application on onion cultivation (Allium cepa) in Morocco},
  series = {Water},
  volume    = {15},
  journal   = {Water},
  number    = {11},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/w15111972},
  pages     = {Artikel 1972},
  year      = {2023},
  abstract  = {Throughout the last decade, and particularly in 2022, water scarcity has become a critical concern in Morocco and other Mediterranean countries. The lack of rainfall during spring was worsened by a succession of heat waves during the summer. To address this drought, innovative solutions, including the use of new technologies such as hydrogels, will be essential to transform agriculture. This paper presents the findings of a study that evaluated the impact of hydrogel application on onion (Allium cepa) cultivation in Meknes, Morocco. The treatments investigated in this study comprised two different types of hydrogel-based soil additives (Arbovit® polyacrylate and Huminsorb® polyacrylate), applied at two rates (30 and 20 kg/ha), and irrigated at two levels of water supply (100\% and 50\% of daily crop evapotranspiration; ETc). Two control treatments were included, without hydrogel application and with both water amounts. The experiment was conducted in an open field using a completely randomized design. The results indicated a significant impact of both hydrogel-type dose and water dose on onion plant growth, as evidenced by various vegetation parameters. Among the hydrogels tested, Huminsorb® Polyacrylate produced the most favorable outcomes, with treatment T9 (100\%, HP, 30 kg/ha) yielding 70.55 t/ha; this represented an increase of 11 t/ha as compared to the 100\% ETc treatment without hydrogel application. Moreover, the combination of hydrogel application with 50\% ETc water stress showed promising results, with treatment T4 (HP, 30 kg, 50\%) producing almost the same yield as the 100\% ETc treatment without hydrogel while saving 208 mm of water.},
  language  = {en}
}
@misc{Huening2023,
  author    = {H{\"u}ning, Felix},
  title     = {Sensorvorrichtung zur Erfassung eines Magnetfelds sowie magnetbasiertes Sensorsystem zur Erfassung einer Bewegung eines beweglichen Objekts},
  year      = {2023},
  abstract  = {Eine Sensorvorrichtung (10;110;210;310;410) zur Erfassung eines Magnetfelds, mit einer Wiegand-Sensoreinheit (12;112;212) umfassend: • - mindestens zwei Wiegand-Dr{\"a}hte (20) und • - eine Spulenanordnung (22;122;222), die die mindestens zwei Wiegand-Dr{\"a}hte (20) radial umschließt und die • • • ein Sensorelement (26;126;226) und • • ein Triggerelement (28;128;228), durch das ein Triggermagnetfeld erzeugbar ist, bildet, ist bekannt. Um ein magnetbasiertes Sensorsystem (300;400) zur Erfassung einer Bewegung eines beweglichen Objekts (301;401) zu erm{\"o}glichen, das ohne externe Energieversorgung zuverl{\"a}ssig sowie energieeffizient arbeitet und kosteng{\"u}nstig hergestellt werden kann, ist bei der erfindungsgem{\"a}ßen Sensorvorrichtung (10;110;210;310;410) eine Wiegand-Triggereinheit (14;14a) vorhanden, umfassend: • - einen Wiegand-Draht (30) und • - eine Trigger-Sensorspule (32), die den Wiegand-Draht (30) radial umschließt, wobei ein erstes Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem ersten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist und ein zweites Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem zweiten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist. Auf diese Weise verst{\"a}rkt ein in der Trigger-Sensorspule (32) erzeugter Impuls das Gesamtmagnetfeld, das auf die Wiegand-Dr{\"a}hte (20) in der Sensoreinheit einwirkt, derart, dass die Triggefeldst{\"a}rke aller Wiegand-Dr{\"a}hte (20) {\"u}berschritten wird und diese im wesentlichen zeitgleich ausl{\"o}sen.},
  language  = {de}
}
@article{Timme2023,
  author    = {Timme, Michael},
  title     = {Bauliche Ver{\"a}nderungen durch Wohnungseigent{\"u}mer und die Zustimmung der Gemeinschaft : Zugleich eine Besprechung des BGH, Urt. v. 17.3.2023 - V ZR 140/22, MDR 2023, 619},
  series = {Monatsschrift f{\"u}r Deutsches Recht},
  volume    = {77},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht},
  number    = {13},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {2194-4202 (online)},
  pages     = {815 -- 818},
  year      = {2023},
  abstract  = {Durch das WEMoG (Gesetz v. 16.10.2020, BGBl. I 2187) hat der Gesetzgeber die Regelung des \S 20 WEG eingef{\"u}hrt. Demnach ist auch f{\"u}r bauliche Ver{\"a}nderungen an R{\"a}umen und Fl{\"a}chen, die einem Sondernutzungsrecht unterliegen, die Zustimmung der Gemeinschaft notwendig. Der BGH hat nun mit Urt. v. 17.3.2023 -V ZR 140/22, MDR 2023, 619 deutlich gemacht, dass bei Fehlen eines entsprechenden Beschlusses, die bauliche Ver{\"a}nderung durch einen einzelnen Wohnungseigent{\"u}mer nicht vorgenommen werden darf, sondern eine rechtswidrige Eigentumsbeeintr{\"a}chtigung darstellt. Der folgende Beitrag nimmt die Entscheidung zum Anlass, um die neue Rechtslage durch \S 20 WEG eingehend zu erl{\"a}utern. Gleichzeitig werden die Folgen der aktuellen Entscheidung n{\"a}her dargestellt.},
  language  = {de}
}