TY  - JOUR
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Krischer, M.
A1  - Wenzel, L.
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Biselli, Manfred
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Enzymatically catalyzed degradation of biodegradable polymers investigated by means of a semiconductor-based field-effect sensor
JF  - Procedia Engineering
N2  - A semiconductor field-effect device has been used for an enzymatically catalyzed degradation of biopolymers for the first time. This novel technique is capable to monitor the degradation process of multiple samples in situ and in real-time. As model system, the degradation of the biopolymer poly(D, L-lactic acid) has been monitored in the degradation medium containing the enzyme lipase from Rhizomucor miehei. The obtained results demonstrate the potential of capacitive field-effect sensors for degradation studies of biodegradable polymers.
KW  - Field-effect sensor
KW  - enzymatic (bio)degradation
KW  - poly(d, l-lactic acid)
KW  - in-situ monitoring
KW  - impedance spectroscopy
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.689
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 1314
EP  - 1317
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Reisert, Steffen
A1  - Schubert, J.
A1  - Zander, W.
A1  - Begoyan, V. K.
A1  - Buniatyan, V. V.
A1  - Schöning, Michael Josef
T1  - Chemical sensors based on a high-k perovskite oxide of barium strontium titanate
JF  - Procedia Engineering
N2  - High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors for liquids. In this work, BST films have been applied as a sensitive transducer material for a label-free detection of adsorbed charged macromolecules (positively charged polyelectrolytes) and concentration of hydrogen peroxide vapor as well as protection insulator layer for a contactless electrolyte-conductivity sensor. The experimental results of characterization of individual sensors are presented. Special emphasis is devoted towards the development of a capacitively-coupled contactless electrolyte-conductivity sensor.
KW  - barium strontium titanate
KW  - high-k material
KW  - contactless conductivity sensor
KW  - multi-functional material
KW  - hydrogen peroxide
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.258
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 28
EP  - 31
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Wu, Chunsheng
A1  - Poghossian, Arshak
A1  - Werner, Frederik
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Label-free detection of DNA hybridization with light-addressable potentiometric sensors: comparison of various DNA-immobilization strategies
JF  - Procedia Engineering
N2  - Light-addressable potentiometric sensors (LAPS) consisting of a p-Si-SiO2 and p-Si-SiO2-Au structure, respectively, have been tested for a label-free electrical detection of DNA (deoxyribonucleic acid) hybridization. Three different strategies for immobilizing single-stranded probe DNA (ssDNA) molecules on a LAPS surface have been studied and compared: (a) immobilization of thiol-modified ssDNA on the patterned Au surface via gold-thiol bond, (b) covalent immobilization of amino-modified ssDNA onto the SiO2 surface functionalized with 3-aminopropyltriethoxysilane and (c) layer-by-layer adsorption of negatively charged ssDNA on a positively charged weak polyelectrolyte layer of poly(allylamine hydrochloride).
KW  - LAPS
KW  - lable-free detection
KW  - DNA hybridization
KW  - field-effect sensor
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.647
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 755
EP  - 758
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Seki, K.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Enhancement of the spatial resolution of the chemical imaging sensor by a hybrid fiber-optic illumination
JF  - Procedia Engineering
N2  - The chemical imaging sensor, which is based on the principle of the light-addressable potentiometric sensor (LAPS), is a powerful tool to visualize the spatial distribution of chemical species on the sensor surface. The spatial resolution of this sensor depends on the diffusion of photocarriers excited by a modulated light. In this study, a novel hybrid fiber-optic illumination was developed to enhance the spatial resolution. It consists of a modulated light probe to generate a photocurrent signal and a ring of constant light, which suppresses the lateral diffusion of minority carriers excited by the modulated light. It is demonstrated that the spatial resolution was improved from 92 μm to 68 μm.
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.563
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 612
EP  - 615
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bragard, Michael
A1  - Bragard, G.
T1  - Erweiterungen für das CBL2-Messinterface von Texas-Instruments
JF  - Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur Förderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.
N2  - Das von Texas-Instruments (TI) vertriebene Interface CBL2 wird über einige TI-Grafik-Rechner (TI-92, TI-89 usw.) angesteuert. Wegen seiner Handlichkeit wird dieses System beim Unterricht in wechselnden Räumen »großen« Messwerterfassungssystemen oft vorgezogen. Das CBL2 bietet drei analoge Eingänge, die immerhin mit 10 Bit Auflösung und bis zu einer Frequenz von 50 kHz arbeiten. Weiterhin besitzt das CBL2 eine Buchse für angeblich nur einen digitalen Ein- bzw. Ausgang. An diesem Eingang wird standardmäßig hauptsächlich der Bewegungssensor CBR betrieben. In diesem Beitrag werden Erweiterungsmöglichkeiten dieses Anschlusses beschrieben.
Y1  - 2003
SN  - 0025-5866
N1  - Zugang nur für MNU-Mitglieder!
VL  - 56
IS  - 2
SP  - 87
EP  - 88
PB  - Seeberger
CY  - Neuss
ER  - 
TY  - JOUR
A1  - Bragard, Michael
T1  - Effektvoller LED-Kreisel : zeigt Text wie programmiert, wenn er rotiert
JF  - Elektor : electronics worldwide
N2  - Wenn eine runde Platine mit LED-Zeile rotiert, entstehen leuchtende Ringe. Steuert man die LEDs mit einem Mikrocontroller an, lassen sich aber auch "stehende" Bilder darstellen. Unser elektronischer Kreisel kann Buchstaben und Ziffern anzeigen. Dabei wird das Erdmagnetfeld auf clevere Weise zur Synchronisation genutzt. Hier reichen die Anwendungen vom Rundenzähler bis zum Kompass!
Y1  - 2008
SN  - 0932-5468
VL  - 39
IS  - 12
SP  - 18
EP  - 23
ER  - 
TY  - JOUR
A1  - Bragard, G.
A1  - Bragard, Michael
T1  - Ein kostengünstiges, universelles Modellbauinterface
JF  - Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur Förderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.
N2  - Wir stellen einen USB-Baustein vor, der eine kostengünstige und universelle Möglichkeit schafft , im Unterricht den Themenkreis Messen-Steuern-Regeln zu behandeln. Die Funktionalität orientiert sich am CVK-Interface der Firma Fischertechnik. Im Gegensatz zu kommerziellen Lösungen erlaubt unser Aufbau auch den preiswerten Einsatz in Gruppen- oder Einzelarbeit. Abschließend berichten wir über ein Beispiel aus dem Unterrichtseinsatz.
Y1  - 2012
SN  - 0025-5866
VL  - 65
IS  - 5
SP  - 290
EP  - 293
PB  - Seeberger
CY  - Neuss
ER  - 
TY  - JOUR
A1  - Bragard, Michael
A1  - van Hoek, H.
A1  - De Doncker, R. W.
T1  - A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance
JF  - IEEE transactions on power electronics
N2  - This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.
Y1  - 2012
U6  - https://doi.org/10.1109/TPEL.2012.2189136
SN  - 0885-8993
VL  - 27
IS  - 9
SP  - 4163
EP  - 4171
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Bragard, Michael
A1  - Conrad, M.
A1  - van Hoek, H.
A1  - De Doncker, R. W.
T1  - The integrated emitter turn-off thyristor (IETO) : an innovative thyristor-based high power semiconductor device using MOS assisted turn-off
JF  - IEEE transactions on industry applications
Y1  - 2011
U6  - https://doi.org/10.1109/TIA.2011.2161432
SN  - 0093-9994
VL  - 47
IS  - 5
SP  - 2175
EP  - 2182
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Mikucki, Jill
A1  - Tulaczyk, Slawek
A1  - Digel, Ilya
A1  - Espe, Clemens
A1  - Feldmann, Marco
A1  - Francke, Gero
A1  - Kowalski, Julia
A1  - Xu, Changsheng
T1  - IceMole : A maneuverable probe for clean in situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems
JF  - Annals of Glaciology
N2  - There is significant interest in sampling subglacial environments for geobiological studies, but they are difficult to access. Existing ice-drilling technologies make it cumbersome to maintain microbiologically clean access for sample acquisition and environmental stewardship of potentially fragile subglacial aquatic ecosystems. The IceMole is a maneuverable subsurface ice probe for clean in situ analysis and sampling of glacial ice and subglacial materials. The design is based on the novel concept of combining melting and mechanical propulsion. It can change melting direction by differential heating of the melting head and optional side-wall heaters. The first two prototypes were successfully tested between 2010 and 2012 on glaciers in Switzerland and Iceland. They demonstrated downward, horizontal and upward melting, as well as curve driving and dirt layer penetration. A more advanced probe is currently under development as part of the Enceladus Explorer (EnEx) project. It offers systems for obstacle avoidance, target detection, and navigation in ice. For the EnEx-IceMole, we will pay particular attention to clean protocols for the sampling of subglacial materials for biogeochemical analysis. We plan to use this probe for clean access into a unique subglacial aquatic environment at Blood Falls, Antarctica, with return of a subglacial brine sample.
KW  - Antarctic Glaciology
KW  - Extraterrestrial Glaciology
KW  - Glaciological instruments and methods
KW  - Subclacial exploration
KW  - Subglacial lakes
Y1  - 2014
U6  - https://doi.org/10.3189/2014AoG65A004
SN  - 1727-5644
VL  - 55
IS  - 65
SP  - 14
EP  - 22
PB  - Cambridge University Press
CY  - Cambridge
ER  -