TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Shakedown analysis of Reissner-Mindlin plates using the edge-based smoothed finite element method
T2  - Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.
N2  - This paper concerns the development of a primal-dual algorithm for limit and shakedown analysis of Reissner-Mindlin plates made of von Mises material. At each optimization iteration, the lower bound of the shakedown load multiplier is calculated simultaneously with the upper bound using the duality theory. An edge-based smoothed finite element method (ES-FEM) combined with the discrete shear gap (DSG) technique is used to improve the accuracy of the solutions and to avoid the transverse shear locking behaviour. The method not only possesses all inherent features of convergence and accuracy from ES-FEM, but also ensures that the total number of variables in the optimization problem is kept to a minimum compared with the standard finite element formulation. Numerical examples are presented to demonstrate the effectiveness of the present method.
Y1  - 2014
SN  - 978-94-007-6826-0 (Print) 978-94-007-6827-7 (Online)
U6  - https://doi.org/10.1007/978-94-007-6827-7_5
SP  - 101
EP  - 117
PB  - Springer
CY  - Dordrecht [u.a.]
ER  - 
TY  - JOUR
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - Stresses produced by different textile mesh implants in a tissue equivalent
JF  - BioNanoMaterials
N2  - Two single-incision mini-slings used for treating urinary incontinence in women are compared with respect to the stresses they produce in their surrounding tissue. In an earlier paper we experimentally observed that these implants produce considerably different stress distributions in a muscle tissue equivalent. Here we perform 2D finite element analyses to compare the shear stresses and normal stresses in the tissue equivalent for the two meshes and to investigate their failure behavior. The results clearly show that the Gynecare TVT fails for increasing loads in a zipper-like manner because it gradually debonds from the surrounding tissue. Contrary to that, the tissue at the ends of the DynaMesh-SIS direct may rupture but only at higher loads. The simulation results are in good agreement with the experimental observations thus the computational model helps to interpret the experimental results and provides a tool for qualitative evaluation of mesh implants.
Y1  - 2014
U6  - https://doi.org/10.1515/bnm-2014-0003
SN  - 2191-4672 (E-Journal); 2193-066X (E-Journal); 0011-8656 (Print); 1616-0177 (Print); 2193-0651 (Print)
VL  - 15
IS  - 1-2
SP  - 25
EP  - 30
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Knott, Thomas C.
A1  - Sofronia, Raluca E.
A1  - Gerressen, Marcus
A1  - Law, Yuen
A1  - Davidescu, Arjana
A1  - Savii, George G.
A1  - Gatzweiler, Karl-Heinz
A1  - Staat, Manfred
A1  - Kuhlen, Torsten W.
T1  - Preliminary bone sawing model for a virtual reality-based training simulator of bilateral sagittal split osteotomy
T2  - Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)
N2  - Successful bone sawing requires a high level of skill and experience, which could be gained by the use of Virtual Reality-based simulators. A key aspect of these medical simulators is realistic force feedback. The aim of this paper is to model the bone sawing process in order to develop a valid training simulator for the bilateral sagittal split osteotomy, the most often applied corrective surgery in case of a malposition of the mandible. Bone samples from a human cadaveric mandible were tested using a designed experimental system. Image processing and statistical analysis were used for the selection of four models for the bone sawing process. The results revealed a polynomial dependency between the material removal rate and the applied force. Differences between the three segments of the osteotomy line and between the cortical and cancellous bone were highlighted.
KW  - Bone sawing
KW  - virtual reality
KW  - training simulator
Y1  - 2014
SN  - 978-3-319-12057-7 (Online)
SN  - 978-3-319-12056-0 (Print)
U6  - https://doi.org/10.1007/978-3-319-12057-7_1
SP  - 1
EP  - 10
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - FEM-based shakedown analysis of hardening structures
JF  - Asia Pacific journal on computational engineering
N2  - This paper develops a new finite element method (FEM)-based upper bound algorithm for limit and shakedown analysis of hardening structures by a direct plasticity method. The hardening model is a simple two-surface model of plasticity with a fixed bounding surface. The initial yield surface can translate inside the bounding surface, and it is bounded by one of the two equivalent conditions: (1) it always stays inside the bounding surface or (2) its centre cannot move outside the back-stress surface. The algorithm gives an effective tool to analyze the problems with a very high number of degree of freedom. Our numerical results are very close to the analytical solutions and numerical solutions in literature.
Y1  - 2014
U6  - https://doi.org/10.1186/2196-1166-1-4
SN  - 2196-1166 (E-Journal)
IS  - 1
SP  - Article No. 4
PB  - SpringerOpen
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Yang, Peng-Fei
A1  - Kriechbaumer, Andreas
A1  - Albracht, Kirsten
A1  - Sanno, Maximilian
A1  - Ganse, Bergita
A1  - Koy, Timmo
A1  - Shang, Peng
A1  - brüggemann, Gert-Peter
A1  - Müller, Lars Peter
A1  - Rittweger, Jörn
T1  - A novel optical approach for assessing in vivo bone segment deformation and its application in muscle-bone relationship studies in humans
JF  - Journal of Orthopaedic Translation
Y1  - 2014
U6  - https://doi.org/10.1016/j.jot.2014.07.078
SN  - 2214-0328
SN  - 2214-031X
VL  - 2
IS  - 4
SP  - 238
EP  - 238
PB  - Elsevier
CY  - Singapore
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Krischer, M.
A1  - Wenzel, L.
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Biselli, Manfred
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Enzymatically catalyzed degradation of biodegradable polymers investigated by means of a semiconductor-based field-effect sensor
JF  - Procedia Engineering
N2  - A semiconductor field-effect device has been used for an enzymatically catalyzed degradation of biopolymers for the first time. This novel technique is capable to monitor the degradation process of multiple samples in situ and in real-time. As model system, the degradation of the biopolymer poly(D, L-lactic acid) has been monitored in the degradation medium containing the enzyme lipase from Rhizomucor miehei. The obtained results demonstrate the potential of capacitive field-effect sensors for degradation studies of biodegradable polymers.
KW  - Field-effect sensor
KW  - enzymatic (bio)degradation
KW  - poly(d, l-lactic acid)
KW  - in-situ monitoring
KW  - impedance spectroscopy
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.689
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 1314
EP  - 1317
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Label-free sensing of biomolecules with field-effect devices for clinical applications
JF  - Electroanalysis
N2  - Among the variety of transducer concepts proposed for label-free detection of biomolecules, the semiconductor field-effect device (FED) is one of the most attractive platforms. As medical techniques continue to progress towards diagnostic and therapies based on biomarkers, the ability of FEDs for a label-free, fast and real-time detection of multiple pathogenic and physiologically relevant molecules with high specificity and sensitivity offers very promising prospects for their application in point-of-care and personalized medicine for an early diagnosis and treatment of diseases. The presented paper reviews recent advances and current trends in research and development of different FEDs for label-free, direct electrical detection of charged biomolecules by their intrinsic molecular charge. The authors are mainly focusing on the detection of the DNA hybridization event, antibody-antigen affinity reaction as well as clinically relevant biomolecules such as cardiac and cancer biomarkers.
Y1  - 2014
U6  - https://doi.org/10.1002/elan.201400073
SN  - 1521-4109 (E-Journal); 1040-0397 (Print)
VL  - 26
IS  - 6
SP  - 1197
EP  - 1213
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Leinhos, Marcel
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Micromachined multi-parameter sensor chip for the control of polymer-degradation medium
JF  - Physica Status Solidi (A) : special issue on engineering and functional interfaces
N2  - It is well known that the degradation environment can strongly influence the biodegradability and kinetics of biodegradation processes of polymers. Therefore, besides the monitoring of the degradation process, it is also necessary to control the medium in which the degradation takes place. In this work, a micromachined multi-parameter sensor chip for the control of the polymer-degradation medium has been developed. The chip combines a capacitive field-effect pH sensor, a four-electrode electrolyte-conductivity sensor and a thin-film Pt-temperature sensor. The results of characterization of individual sensors are presented. In addition, the multi-parameter sensor chip together with an impedimetric polymer-degradation sensor was simultaneously characterized in degradation solutions with different pH and electrolyte conductivity. The obtained results demonstrate the feasibility of the multi-parameter sensor chip for the control of the polymer-degradation medium.
Y1  - 2014
U6  - https://doi.org/10.1002/pssa.201330364
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1346
EP  - 1351
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Chaudhuri, S.
A1  - Zander, W.
A1  - Schubert, J.
A1  - Begoyan, V. K.
A1  - Buniatyan, V. V.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Capacitively coupled electrolyte-conductivity sensor based on high-k material of barium strontium titanate
JF  - Sensors and actuators. B: Chemical
Y1  - 2014
U6  - https://doi.org/10.1016/j.snb.2014.02.103
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
IS  - 198
SP  - 102
EP  - 109
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Kramer, F.
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bratov, A.
A1  - Abramova, N.
A1  - Schöning, Michael Josef
T1  - Planar and 3D interdigitated electrodes for biosensing applications: The impact of a dielectric barrier on the sensor properties
JF  - Physica Status Solidi (A) - Applications and Materials Science
N2  - Planar and three-dimensional (3D) interdigitated electrodes (IDE) with electrode digits separated by an insulating barrier of different heights were electrochemically characterized and compared in terms of their sensing properties. Due to the impact of the surface resistance, both types of IDE structures display a non-linear behavior in low-ionic strength solutions. The experimental data were fitted to an electrical equivalent circuit and interpreted taking into account the surface-charge-governed properties. The effect of a charged polyelectrolyte layer electrostatically assembled onto the sensor surface on the surface resistance in solutions with different KCl concentration is studied. In case of the same electrode footprint, 3D-IDEs show a larger cell constant and a higher sensitivity to molecular adsorption than that of planar IDEs. The obtained results demonstrate the potential of 3D-IDEs as a new transducer structure for a direct label-free sensing of charged molecules.
Y1  - 2014
U6  - https://doi.org/10.1002/pssa.201330416
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1357
EP  - 1363
PB  - Wiley-VCH
CY  - Weinheim
ER  -