TY  - JOUR
A1  - Grundmann, Jan Thimo
A1  - Dachwald, Bernd
A1  - Grimm, Christian D.
A1  - Kahle, Ralph
A1  - Koch, Aaron Dexter
A1  - Krause, Christian
A1  - Lange, Caroline
A1  - Quantius, Dominik
A1  - Ulamec, Stephan
T1  - Spacecraft for Hypervelocity Impact Research – An Overview of Capabilities, Constraints and the Challenges of Getting There
JF  - Procedia Engineering
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.04.021
SN  - 1877-7058
N1  - Proceedings of the 2015 Hypervelocity Impact Symposium (HVIS 2015)
VL  - Vol. 103
SP  - 151
EP  - 158
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Taddei, Francesca
A1  - Butenweg, Christoph
A1  - Klinkel, S.
T1  - Parametric investigation of the soil-structure interaction effects on the dynamic behaviour of a shallow foundation supported wind turbine considering a layered soil
JF  - Wind energy : an international journal for progress and applications in wind power conversion technology
Y1  - 2015
U6  - https://doi.org/10.1002/we.1703
SN  - 1099-1824 (E-Journal); 1095-4244 (Print)
VL  - Volume 18
IS  - Issue 3
SP  - 399
EP  - 417
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Dikta, Gerhard
A1  - Kühlheim, René
A1  - Mendonca, Jorge
A1  - Una-Alcarez, Jacobo de
T1  - Asymptotic representation of presmoothed Kaplan–Meier integrals with covariates in a semiparametric censorship model
JF  - Journal of Statistical Planning and Inference
Y1  - 2015
U6  - https://doi.org/10.1016/j.jspi.2015.12.001
SN  - 0378-3758
VL  - Vol. 171
SP  - 10
EP  - 37
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Abbas, Karim
T1  - Basic Research on Lattice Structures Focused on the Tensile Strength
JF  - Applied Mechanics and Materials
Y1  - 2015
U6  - https://doi.org/10.4028/www.scientific.net/AMM.808.193
SN  - 1662-7482
N1  - MTeM ; October 14-16, 2015, Cluj-Napoca, Romania
VL  - Vol. 808
SP  - 193
EP  - 198
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - JOUR
A1  - Oertel, Mario
A1  - Bung, Daniel Bernhard
T1  - Stability and scour development of bed material on crossbar block ramps
JF  - International journal of sediment research
N2  - Block ramps are ecologically oriented drop structures with adequate energy dissipation and partially moderate flow velocities. A special case is given with crossbar block ramps, where the upstream and downstream level difference is reduced by a series of basins. To prevent the total structure from failing, the stability of single boulders within the crossbars and the bed material in between must be guaranteed. The present paper addresses the stability of bed material and scour development for various flow regimes. Any bed material erosion may affect the stability of the crossbar boulders, which in turn can result in major damages of the ramp. Therefore new design approaches are developed to choose an appropriate bed material size and to avoid failures of crossbar block ramp structures.
Y1  - 2015
U6  - https://doi.org/10.1016/j.ijsrc.2014.12.003
SN  - 1001-6279
VL  - 30
IS  - 4
SP  - 344
EP  - 350
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
T1  - Physical response of hyperelastic models for composite materials and soft tissues
JF  - Asia pacific journal on computational engineering
Y1  - 2015
U6  - https://doi.org/10.1186/s40540-015-0015-x
SN  - 2196-1166
VL  - 2
IS  - 3 (December 2015)
SP  - 1
EP  - 18
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Improvement study for the dry-low-NOx hydrogen micromix combustion technology
JF  - Propulsion and power research
Y1  - 2015
U6  - https://doi.org/10.1016/j.jppr.2015.07.003
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 132
EP  - 140
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine
JF  - Propulsion and power research
Y1  - 2015
U6  - https://doi.org/10.1016/j.jppr.2015.07.005
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 123
EP  - 131
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Study of Interdigitated Electrode Arrays Using Experiments and Finite Element Models for the Evaluation of Sterilization Processes
JF  - Sensors
N2  - In this work, a sensor to evaluate sterilization processes with hydrogen peroxide vapor has been characterized. Experimental, analytical and numerical methods were applied to evaluate and study the sensor behavior. The sensor set-up is based on planar interdigitated electrodes. The interdigitated electrode structure consists of 614 electrode fingers spanning over a total sensing area of 20 mm2. Sensor measurements were conducted with and without microbiological spores as well as after an industrial sterilization protocol. The measurements were verified using an analytical expression based on a first-order elliptical integral. A model based on the finite element method with periodic boundary conditions in two dimensions was developed and utilized to validate the experimental findings.
Y1  - 2015
U6  - https://doi.org/10.3390/s151026115
SN  - 1424-8220
N1  - This article belongs to the Special Issue "Gas Sensors—Designs and Applications"
VL  - 15
IS  - 10
SP  - 26115
EP  - 26127
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Additive manufactured mechanical disentanglement lock
JF  - RTejournal - Forum für Rapid Technologie
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-2-42147
SN  - 1614-0923
VL  - 12
PB  - Fachhochschule Aachen
CY  - Aachen
ER  -