TY  - JOUR
A1  - Harish, Ajay B.
A1  - Wriggers, Peter
A1  - Jungk, Juliane
A1  - Hojdis, Nils
A1  - Recker, Carla
T1  - Mesoscale Constitutive Modeling of Non-Crystallizing Filled Elastomers
JF  - Computational Mechanics
N2  - Elastomers are exceptional materials owing to their ability to undergo large deformations before failure. However, due to their very low stiffness, they are not always suitable for industrial applications. Addition of filler particles provides reinforcing effects and thus enhances the material properties that render them more versatile for applications like tyres etc. However, deformation behavior of filled polymers is accompanied by several nonlinear effects like Mullins and Payne effect. To this day, the physical and chemical changes resulting in such nonlinear effect remain an active area of research. In this work, we develop a heterogeneous (or multiphase) constitutive model at the mesoscale explicitly considering filler particle aggregates, elastomeric matrix and their mechanical interaction through an approximate interface layer. The developed constitutive model is used to demonstrate cluster breakage, also, as one of the possible sources for Mullins effect observed in non-crystallizing filled elastomers.
Y1  - 2016
U6  - http://dx.doi.org/10.1007/s00466-015-1251-1
SN  - 1432-0924
VL  - 57
SP  - 653
EP  - 677
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Svaneborg, Carsten
A1  - Karimi-Varzaneh, Hossein Ali
A1  - Hojdis, Nils
A1  - Fleck, Franz
A1  - Everaers, Ralf
T1  - Multiscale approach to equilibrating model polymer melts
JF  - Physical Review E
N2  - We present an effective and simple multiscale method for equilibrating Kremer Grest model polymer melts of varying stiffness. In our approach, we progressively equilibrate the melt structure above the tube scale, inside the tube and finally at the monomeric scale. We make use of models designed to be computationally effective at each scale. Density fluctuations in the melt structure above the tube scale are minimized through a Monte Carlo simulated annealing of a lattice polymer model. Subsequently the melt structure below the tube scale is equilibrated via the Rouse dynamics of a force-capped Kremer-Grest model that allows chains to partially interpenetrate. Finally the Kremer-Grest force field is introduced to freeze the topological state and enforce correct monomer packing. We generate 15 melts of 500 chains of 10.000 beads for varying chain stiffness as well as a number of melts with 1.000 chains of 15.000 monomers. To validate the equilibration process we study the time evolution of bulk, collective, and single-chain observables at the monomeric, mesoscopic, and macroscopic length scales. Extension of the present method to longer, branched, or polydisperse chains, and/or larger system sizes is straightforward.
Y1  - 2016
U6  - http://dx.doi.org/10.1103/PhysRevE.94.032502
SN  - 2470-0053
VL  - 94
IS  - 032502
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - JOUR
A1  - Kowalski, Julia
A1  - Linder, Peter
A1  - Zierke, S.
A1  - Wulfen, B. van
A1  - Clemens, J.
A1  - Konstantinidis, K.
A1  - Ameres, G.
A1  - Hoffmann, R.
A1  - Mikucki, J.
A1  - Tulaczyk, S.
A1  - Funke, O.
A1  - Blandfort, D.
A1  - Espe, Clemens
A1  - Feldmann, Marco
A1  - Francke, Gero
A1  - Hiecker, S.
A1  - Plescher, Engelbert
A1  - Schöngarth, Sarah
A1  - Dachwald, Bernd
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Eliseev, D.
A1  - Heinen, D.
A1  - Scholz, F.
A1  - Wiebusch, C.
A1  - Macht, S.
A1  - Bestmann, U.
A1  - Reineking, T.
A1  - Zetzsche, C.
A1  - Schill, K.
A1  - Förstner, R.
A1  - Niedermeier, H.
A1  - Szumski, A.
A1  - Eissfeller, B.
A1  - Naumann, U.
A1  - Helbing, K.
T1  - Navigation technology for exploration of glacier ice with maneuverable melting probes
JF  - Cold Regions Science and Technology
N2  - The Saturnian moon Enceladus with its extensive water bodies underneath a thick ice sheet cover is a potential candidate for extraterrestrial life. Direct exploration of such extraterrestrial aquatic ecosystems requires advanced access and sampling technologies with a high level of autonomy. A new technological approach has been developed as part of the collaborative research project Enceladus Explorer (EnEx). The concept is based upon a minimally invasive melting probe called the IceMole. The force-regulated, heater-controlled IceMole is able to travel along a curved trajectory as well as upwards. Hence, it allows maneuvers which may be necessary for obstacle avoidance or target selection. Maneuverability, however, necessitates a sophisticated on-board navigation system capable of autonomous operations. The development of such a navigational system has been the focal part of the EnEx project. The original IceMole has been further developed to include relative positioning based on in-ice attitude determination, acoustic positioning, ultrasonic obstacle and target detection integrated through a high-level sensor fusion. This paper describes the EnEx technology and discusses implications for an actual extraterrestrial mission concept.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.coldregions.2015.11.006
SN  - 0165-232X
IS  - 123
SP  - 53
EP  - 70
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Braun, Carsten
A1  - Orifici, Adrian C.
T1  - Operational Modal Analysis of a wing excited by transonic flow
JF  - Aerospace Science and Technology
N2  - Operational Modal Analysis (OMA) is a promising candidate for flutter testing and Structural Health Monitoring (SHM) of aircraft wings that are passively excited by wind loads. However, no studies have been published where OMA is tested in transonic flows, which is the dominant condition for large civil aircraft and is characterized by complex and unique aerodynamic phenomena. We use data from the HIRENASD large-scale wind tunnel experiment to automatically extract modal parameters from an ambiently excited wing operated in the transonic regime using two OMA methods: Stochastic Subspace Identification (SSI) and Frequency Domain Decomposition (FDD). The system response is evaluated based on accelerometer measurements. The excitation is investigated from surface pressure measurements. The forcing function is shown to be non-white, non-stationary and contaminated by narrow-banded transonic disturbances. All these properties violate fundamental OMA assumptions about the forcing function. Despite this, all physical modes in the investigated frequency range were successfully identified, and in addition transonic pressure waves were identified as physical modes as well. The SSI method showed superior identification capabilities for the investigated case. The investigation shows that complex transonic flows can interfere with OMA. This can make existing approaches for modal tracking unsuitable for their application to aircraft wings operated in the transonic flight regime. Approaches to separate the true physical modes from the transonic disturbances are discussed.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.ast.2015.11.032
SN  - 1270-9638
VL  - 49
SP  - 73
EP  - 79
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bung, Daniel B.
A1  - Valero, Daniel
T1  - Optical flow estimation in aerated flows
JF  - Journal of Hydraulic Research
N2  - Optical flow estimation is known from Computer Vision where it is used to determine obstacle movements through a sequence of images following an assumption of brightness conservation. This paper presents the first study on application of the optical flow method to aerated stepped spillway flows. For this purpose, the flow is captured with a high-speed camera and illuminated with a synchronized LED light source. The flow velocities, obtained using a basic Horn–Schunck method for estimation of the optical flow coupled with an image pyramid multi-resolution approach for image filtering, compare well with data from intrusive conductivity probe measurements. Application of the Horn–Schunck method yields densely populated flow field data sets with velocity information for every pixel. It is found that the image pyramid approach has the most significant effect on the accuracy compared to other image processing techniques. However, the final results show some dependency on the pixel intensity distribution, with better accuracy found for grey values between 100 and 150.
Y1  - 2016
U6  - http://dx.doi.org/10.1080/00221686.2016.1173600
VL  - 54
IS  - 5
SP  - 575
EP  - 580
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Arreola, Julio
A1  - Mätzkow, Malte
A1  - Durán, Marlena Palomar
A1  - Greeff, Anton
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Optimization of the immobilization of bacterial spores on glass substrates with organosilanes
JF  - Physica status solidi (A) : Applications and materials science
N2  - Spores can be immobilized on biosensors to function as sensitive recognition elements. However, the immobilization can affect the sensitivity and reproducibility of the sensor signal. In this work, three different immobilization strategies with organosilanes were optimized and characterized to immobilize Bacillus atrophaeus spores on glass substrates. Five different silanization parameters were investigated: nature of the solvent, concentration of the silane, silanization time, curing process, and silanization temperature. The resulting silane layers were resistant to a buffer solution (e.g., Ringer solution) with a polysorbate (e.g., Tween®80) and sonication.
KW  - silanization
KW  - organosilanes
KW  - immobilization
KW  - endospores
KW  - biosensors
KW  - Bacillus atrophaeus
Y1  - 2016
U6  - http://dx.doi.org/10.1002/pssa.201532914
SN  - 1862-6319
VL  - 213
IS  - 6
SP  - 1463
EP  - 1470
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Beckenbach, Isabel
A1  - Scheidweiler, Robert
T1  - Perfect ƒ-Matchings and ƒ-Factors in Hypergraphs - A Combinatorial Approach
JF  - Discrete Mathematics
N2  - We prove characterizations of the existence of perfect ƒ-matchings in uniform mengerian and perfect hypergraphs. Moreover, we investigate the ƒ-factor problem in balanced hypergraphs. For uniform balanced hypergraphs we prove two existence theorems with purely combinatorial arguments, whereas for non-uniform balanced hypergraphs we show that the ƒ-factor problem is NP-hard.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.disc.2017.05.005
SN  - 2192-7782
N1  - Als Volltext auch bei ZIB (Zuse Institute Berlin)
VL  - 240
IS  - 10
SP  - 2499
EP  - 2506
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bayon, Arnau
A1  - Valero, Daniel
A1  - Garcia-Bartual, Rafael
A1  - Vallés-Morán, Francisco José
A1  - López-Jiménez, P. Amparo
T1  - Performance assessment of OpenFOAM and FLOW-3D in the numerical modeling of a low Reynolds number hydraulic jump
JF  - Environmental Modelling & Software
N2  - A comparative performance analysis of the CFD platforms OpenFOAM and FLOW-3D is presented, focusing on a 3D swirling turbulent flow: a steady hydraulic jump at low Reynolds number. Turbulence is treated using RANS approach RNG k-ε. A Volume Of Fluid (VOF) method is used to track the air–water interface, consequently aeration is modeled using an Eulerian–Eulerian approach. Structured meshes of cubic elements are used to discretize the channel geometry. The numerical model accuracy is assessed comparing representative hydraulic jump variables (sequent depth ratio, roller length, mean velocity profiles, velocity decay or free surface profile) to experimental data. The model results are also compared to previous studies to broaden the result validation. Both codes reproduced the phenomenon under study concurring with experimental data, although special care must be taken when swirling flows occur. Both models can be used to reproduce the hydraulic performance of energy dissipation structures at low Reynolds numbers.
Y1  - 2016
SN  - 1364-8152
U6  - http://dx.doi.org/10.1016/j.envsoft.2016.02.018
VL  - 80
SP  - 322
EP  - 335
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Jahnke, Siegfried
A1  - Roussel, Johanna
A1  - Hombach, Thomas
A1  - Kochs, Johannes
A1  - Fischbach, Andreas
A1  - Huber, Gregor
A1  - Scharr, Hanno
T1  - phenoSeeder - A robot system for automated handling and phenotyping of individual seeds
JF  - Plant physiology
N2  - The enormous diversity of seed traits is an intriguing feature and critical for the overwhelming success of higher plants. In particular, seed mass is generally regarded to be key for seedling development but is mostly approximated by using scanning methods delivering only two-dimensional data, often termed seed size. However, three-dimensional traits, such as the volume or mass of single seeds, are very rarely determined in routine measurements. Here, we introduce a device named phenoSeeder, which enables the handling and phenotyping of individual seeds of very different sizes. The system consists of a pick-and-place robot and a modular setup of sensors that can be versatilely extended. Basic biometric traits detected for individual seeds are two-dimensional data from projections, three-dimensional data from volumetric measures, and mass, from which seed density is also calculated. Each seed is tracked by an identifier and, after phenotyping, can be planted, sorted, or individually stored for further evaluation or processing (e.g. in routine seed-to-plant tracking pipelines). By investigating seeds of Arabidopsis (Arabidopsis thaliana), rapeseed (Brassica napus), and barley (Hordeum vulgare), we observed that, even for apparently round-shaped seeds of rapeseed, correlations between the projected area and the mass of seeds were much weaker than between volume and mass. This indicates that simple projections may not deliver good proxies for seed mass. Although throughput is limited, we expect that automated seed phenotyping on a single-seed basis can contribute valuable information for applications in a wide range of wild or crop species, including seed classification, seed sorting, and assessment of seed quality.
Y1  - 2016
U6  - http://dx.doi.org/10.1104/pp.16.01122
SN  - 0032-0889
VL  - 172
IS  - 3
SP  - 1358
EP  - 1370
PB  - Oxford University Press
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Bialonski, Stephan
A1  - Caron, David A.
A1  - Schloen, Julia
A1  - Feudel, Ulrike
A1  - Kantz, Holger
A1  - Moorthi, Stefanie D.
T1  - Phytoplankton dynamics in the Southern California Bight indicate a complex mixture of transport and biology
JF  - Journal of Plankton Research
N2  - The stimulation and dominance of potentially harmful phytoplankton taxa at a given locale and time are determined by local environmental conditions as well as by transport to or from neighboring regions. The present study investigated the occurrence of common harmful algal bloom (HAB) taxa within the Southern California Bight, using cross-correlation functions to determine potential dependencies between HAB taxa and environmental factors, and potential links to algal transport via local hydrography and currents. A simulation study, in which Lagrangian particles were released, was used to assess travel times due to advection by prevailing ocean currents in the bight. Our results indicate that transport of some taxa may be an important mechanism for the expansion of their distributions into other regions, which was supported by mean travel times derived from our simulation study and other literature on ocean currents in the Southern California Bight. In other cases, however, phytoplankton dynamics were rather linked to local environmental conditions, including coastal upwelling events. Overall, our study shows that complex current patterns in the Southern California Bight may contribute significantly to the formation and expansion of HABs in addition to local environmental factors determining the spatiotemporal dynamics of phytoplankton blooms.
Y1  - 2016
U6  - http://dx.doi.org/10.1093/plankt/fbv122
SN  - 1464-3774
VL  - 38
IS  - 4
SP  - 1077
EP  - 1091
PB  - Oxford University Press
CY  - Oxford
ER  -