TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Temperature dependence of the exchange splitting of Ni along the -L line
JF  - Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8
Y1  - 1988
N1  - Proceedings of the International conference on Magnetism. Part 1. ICM 88, Paris, France, Juli 25-29, 1988
SP  - 39
EP  - 40
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Temperature and wave-vector dependence of the spin-split band structure of Ni(111) along the Γ-L line
JF  - Physical Review B. 42 (1990), H. 16
Y1  - 1990
SN  - 1095-3795
SP  - 10696
EP  - 10705
ER  - 
TY  - JOUR
A1  - Thomas, Axel
T1  - Technologiezentren in der Aachener Region – Retrospektiven und Perspektiven
JF  - VM Verwaltung und Management
Y1  - 2018
U6  - http://dx.doi.org/10.5771/0947-9856-2018-3-147
SN  - 0947-9856
VL  - 24
IS  - 3
SP  - 147
EP  - 156
PB  - Nomos
CY  - Baden-Baden
ER  - 
TY  - JOUR
A1  - Klocke, Martina
T1  - Study Units in the CIM-Oriented Study Factory
JF  - Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner
Y1  - 1995
SN  - 3-540-19971-3
SP  - 38
EP  - 51
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Henn, Gudrun
A1  - Polaczek, Christa
T1  - Studienerfolg in den Ingenieurwissenschaften
JF  - Das Hochschulwesen : HSW ; Forum für Hochschulforschung, -praxis und -politik
Y1  - 2007
SN  - 0018-2974
VL  - 55
IS  - 5
SP  - 144
EP  - 147
ER  - 
TY  - JOUR
A1  - Wilbring, Daniela
A1  - Enning, Manfred
T1  - Stromversorgung auf Güterwagen - Aktuelle Bemühungen zur Standardisierung
JF  - ETR - Eisenbahntechnische Rundschau
Y1  - 2019
SN  - 0013-2845
VL  - 68
IS  - 11
SP  - 64
EP  - 67
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - JOUR
A1  - Heinrichs, Horst
T1  - STEP bietet mehr
Y1  - 1992
N1  - Konferenz-Einzelbericht : FEM '92 Congress, Int. FEM-Congress, Baden-Baden, DE, 16.-17. Nov, 1992
SP  - 327
EP  - 344
PB  - IKOSS
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kunkel, Maximilian Hugo
A1  - Gebhardt, Andreas
A1  - Mpofu, Khumbaulani
A1  - Kallweit, Stephan
T1  - Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel
JF  - The International Journal of Advanced Manufacturing Technology
N2  - The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s00170-018-2040-8
SN  - 0268-3768
VL  - 98
IS  - 5-8
SP  - 1409
EP  - 1431
PB  - Springer
CY  - London
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Stand der Sensorentwicklung fuer Schutzgasschweissroboter
JF  - Schweissen und Schneiden. 36 (1984), H. 4
Y1  - 1984
SN  - 0036-7184
SP  - 166
EP  - 172
ER  -