TY  - CHAP
A1  - Macdonald, Malcolm
A1  - McGrath, C.
A1  - Appourchaux, T.
A1  - Dachwald, Bernd
A1  - Finsterle, W.
A1  - Gizon, L.
A1  - Liewer, P. C.
A1  - McInnes, Colin R.
A1  - Mengali, G.
A1  - Seboldt, Wolfgang
A1  - Sekii, T.
A1  - Solanki, S. K.
A1  - Velli, M.
A1  - Wimmer-Schweingruber, R. F.
A1  - Spietz, Peter
A1  - Reinhard, Ruedeger
ED  - Macdonald, Malcolm
T1  - Gossamer roadmap technology reference study for a solar polar mission
T2  - Advances in solar sailing
N2  - A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100–125 m to deliver a ‘sufficient value’ minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.
Y1  - 2014
SN  - 978-3-642-34906-5
U6  - https://doi.org/10.1007/978-3-642-34907-2_17
SP  - 243
EP  - 257
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
A1  - Stavroulakis, G. E.
ED  - Onate, E.
T1  - A multicriteria method for truss optimization
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Koch, Jan-Peter
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Evaluation of a computational model for drug action on cardiac tissue
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Sora, M.-C.
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - FEM-based shakedown analysis of hardening structures
JF  - Asia Pacific journal on computational engineering
N2  - This paper develops a new finite element method (FEM)-based upper bound algorithm for limit and shakedown analysis of hardening structures by a direct plasticity method. The hardening model is a simple two-surface model of plasticity with a fixed bounding surface. The initial yield surface can translate inside the bounding surface, and it is bounded by one of the two equivalent conditions: (1) it always stays inside the bounding surface or (2) its centre cannot move outside the back-stress surface. The algorithm gives an effective tool to analyze the problems with a very high number of degree of freedom. Our numerical results are very close to the analytical solutions and numerical solutions in literature.
Y1  - 2014
U6  - https://doi.org/10.1186/2196-1166-1-4
SN  - 2196-1166 (E-Journal)
IS  - 1
SP  - Article No. 4
PB  - SpringerOpen
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Behbahani, Mehdi
T1  - An Experimental Study of Thrombocyte Reactions in Response to Biomaterial Surfaces and Varying Shear Stress
T2  - Proceedings of the International Conference on Biomedical Engineering and Systems Prague, Czech Republic, August 14-15, 2014
Y1  - 2014
SP  - Paper 125
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Müller, Wolfram
ED  - Onate, E.
T1  - Optimization of the flight style in ski jumping
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
N1  - Das Paper wurde nach der Konferenz überarbeitet.
SP  - 799
EP  - 810
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Uncertain multimode failure and limit analysis of shells
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - McInnes, Colin R.
A1  - Bothmer, Volker
A1  - Dachwald, Bernd
A1  - Geppert, Ulrich R. M. E.
A1  - Heiligers, Jeannette
A1  - Hilgers, Alan
A1  - Johnson, Les
A1  - Macdonald, Malcolm
A1  - Reinhard, Ruedeger
A1  - Seboldt, Wolfgang
A1  - Spietz, Peter
T1  - Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 227
EP  - 242
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Akimbekov, Nuraly S.
A1  - Digel, Ilya
A1  - Zhubanova, A. A.
T1  - Advantages of creation of e-books in training of specialists biologists and biotechnologists
JF  - KazNU Bulletin. Biology series.
N2  - The necessity of e-books as a primary of learning, its opportunities for realization of competence during training biologist and biotechnologist specialists are determined. Definitions and requirements to the e-books, its advantages in comparison with traditional textbooks, and the ways of creation of e-books in the SunRav BookEditor program are considered.
KW  - SunRav BookEditor
KW  - softs
KW  - distance learning
KW  - e-issues
KW  - e-books
Y1  - 2014
SN  - 1563-0218
VL  - 60
IS  - 1
SP  - 249
EP  - 252
PB  - Al-Farabi Kazakh National University
CY  - Almaty
ER  -