TY  - JOUR
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Strobel, M.
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, R.
A1  - Wagner, Torsten
T1  - Hydrogels with incorporated graphene oxide as light-addressable actuator materials for cell culture environments in lab-on-chip systems
JF  - Physica status solidi (a)
N2  - Abstractauthoren Graphene oxide (GO) nanoparticles were incorporated in temperature-sensitive Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels. The nanoparticles increase the light absorption and convert light energy into heat efficiently. Thus, the hydrogels with GO can be stimulated spatially resolved by illumination as it was demonstrated by IR thermography. The temporal progression of the temperature maximum was detected for different concentrations of GO within the polymer network. Furthermore, the compatibility of PNIPAAm hydrogels with GO and cell cultures was investigated. For this purpose, culture medium was incubated with hydrogels containing GO and the viability and morphology of chinese hamster ovary (CHO) cells was examined after several days of culturing in presence of this medium.
Y1  - 2016
U6  - https://doi.org/10.1002/pssa.201533056
SN  - 1862-6300
VL  - 213
IS  - 6
SP  - 1520
EP  - 1525
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
A1  - Valero, Daniel
ED  - Dewals, Benjamin
T1  - Image processing techniques for velocity estimation in highly aerated flows: bubble image velocimetry vs. optical flow
T2  - Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)
Y1  - 2016
SN  - 978-1-138-02977-4
SN  - 978-1-4987-8149-7 (eBook)
U6  - https://doi.org/10.1201/b21902-31
SP  - 151
EP  - 157
PB  - CRC Press
ER  - 
TY  - CHAP
A1  - Kahmann, Stephanie
A1  - Hackl, Michael
A1  - Wegmann, Kilian
A1  - Müller, Lars-Peter
A1  - Staat, Manfred
ED  - Erni, Daniel
T1  - Impact of a proximal radial shortening osteotomy on the distribution of forces and the stability of the elbow
T2  - 1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen
N2  - The human arm consists of the humerus (upper arm), the medial ulna and the lateral radius (forearm). The joint between the humerus and the ulna is called humeroulnar joint and the joint between the humerus and the radius is called humeroradial joint. Lateral and medial collateral ligaments stabilize the elbow. Statistically, 2.5 out of 10,000 people suffer from radial head fractures [1]. In these fractures the cartilage is often affected. Caused by the injured cartilage, degenerative diseases like posttraumatic arthrosis may occur. The resulting pain and reduced range of motion have an impact on the patient’s quality of life. Until now, there has not been a treatment which allows typical loads in daily life activities and offers good long-term results. A new surgical approach was developed with the motivation to reduce the progress of the posttraumatic arthrosis. Here, the radius is shortened by 3 mm in the proximal part [2]. By this means, the load of the radius is intended to be reduced due to a load shift to the ulna. Since the radius is the most important stabilizer of the elbow it has to be confirmed that the stability is not affected. In the first test (Fig. 1 left), pressure distributions within the humeroulnar and humeroradial joints a native and a shortened radius were measured using resistive pressure sensors (I5076 and I5027, Tekscan, USA). The humerus was loaded axially in a tension testing machine (Z010, Zwick Roell, Germany) in 50 N steps up to 400 N. From the humerus the load is transmitted through both the radius and the ulna into the hand which is fixed on the ground. In the second test (Fig. 1 right), the joint stability was investigated using a digital image correlation system to measure the displacement of the ulna. Here, the humerus is fixed with a desired flexion angle and the unconstrained forearm lies on the ground. A rope connects the load actuator with a hook fixed in the ulna. A guide roller is used so that the rope pulls the ulna horizontally when a tensile load is applied. This creates a moment about the elbow joint with a maximum value of 7.5 Nm. Measurements were performed with varying flexion angles (0°, 30°, 60°, 90°, 120°). For both tests and each measurement, seven specimens were used. Student ́s t-test was employed to determine whether the mean values of the measurements in native specimen and operated specimens differ significantly.
Y1  - 2016
U6  - https://doi.org/10.17185/duepublico/40821
SP  - 7
EP  - 8
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - In-flight vibration-based structural health monitoring of aircraft wings
T2  - 30th Congress of the internatonal council of the aeronautical sciences : 25.-30. September 2016, Daejeon, Korea
N2  - This work presents a methodology for automated
damage-sensitive feature extraction and anomaly
detection under multivariate operational variability
for in-flight assessment of wings. The
method uses a passive excitation approach, i. e.
without the need for artificial actuation. The
modal system properties (natural frequencies and
damping ratios) are used as damage-sensitive
features. Special emphasis is placed on the use
of Fiber Bragg Grating (FBG) sensing technology
and the consideration of Operational and
Environmental Variability (OEV). Measurements
from a wind tunnel investigation with a composite
cantilever equipped with FBG and piezoelectric
sensors are used to successfully detect an impact
damage. In addition, the feasibility of damage
localisation and severity estimation is evaluated
based on the coupling found between damageand
OEV-induced feature changes.
Y1  - 2016
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Industrial Internet of Things : Seifenblase oder Revolution
JF  - Elektronik
Y1  - 2016
SN  - 0013-5658
N1  - gedruckt in der Bereichsbibliothek Eupener Str. unter der Signatur Z 263
IS  - 7
SP  - 39
EP  - 45
PB  - WEKA-Fachmedien
CY  - München
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Industrie 4.0 - warten bis die Revolution vorbei ist?
T2  - Automatisierung im Fokus von Industrie 4.0 : Tagungsband AALE 2016 ; 13. Fachkonferenz, Lübeck
Y1  - 2016
SN  - 978-3-8356-7312-0
N1  - AALE-Konferenz <13., 2016, Lübeck>
SP  - 127
EP  - 136
PB  - DIV Deutscher Industrieverlag GmbH
CY  - München
ER  - 
TY  - JOUR
A1  - Hamad, E. M.
A1  - Bilatto, S. E. R.
A1  - Adly, N. Y.
A1  - Correa, D. S.
A1  - Wolfrum, B.
A1  - Schöning, Michael Josef
A1  - Offenhäusser, A.
A1  - Yakushenko, A.
T1  - Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
JF  - Lab on a Chip
N2  - Bonding of polymer-based microfluidics to polymer substrates still poses a challenge for Lab-On-a-Chip applications. Especially, when sensing elements are incorporated, patterned deposition of adhesives with curing at ambient conditions is required. Here, we demonstrate a fabrication method for fully printed microfluidic systems with sensing elements using inkjet and stereolithographic 3D-printing.
Y1  - 2016
U6  - https://doi.org/10.1039/C5LC01195G
SN  - 1473-0189
VL  - 16
IS  - 1
SP  - 70
EP  - 74
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - BOOK
A1  - Janser, Frank
A1  - Havermann, Marc
A1  - Hoeveler, Bastian
A1  - Hertz, Cyril
T1  - Inkompressible Profil- und Tragflügelaerodynamik
T3  - Strömungslehre und Aerodynamik ; Band 2
Y1  - 2016
SN  - 978-3-8107-0261-6
N1  - Signatur in der Bibliothek: 21 ZSE 118
PB  - Verlagshaus Mainz GmbH
CY  - Aachen
ET  - 1. Auflage
ER  - 
TY  - BOOK
A1  - Wilke, Thomas
T1  - Innendekoration : graphische Vorlagen und theoretische Vorgaben für die wandfeste Dekoration von Appartement im 17. und 18. Jahrhundert in Frankreich
Y1  - 2016
SN  - 978-3-89235-233-4
N1  - Schriftenreihe des Kunsthistorischen Instituts der Universität Stuttgart ; 3. Band; 
Dissertation: Universität Stuttgart, 2012
PB  - scaneg Verlag
CY  - München
ER  - 
TY  - JOUR
A1  - Lind, Thorsten Patric
T1  - Insolvenzanfechtung: Keine Gläubigerbenachteiligung bei Ablösezahlung gegen Forderungsverzicht
JF  - Der Betrieb
N2  - Schwerpunkt einer vorinsolvenzlichen Sanierung ist i.d.R., dass einzelne Gläubiger gegen Teilzahlungen auf ihre Forderungen verzichten und somit dem Unternehmen den notwendigen finanziellen Freiraum für einen Turnaround geben. Die Motivation der Gläubiger für einen Verzicht ist dabei auch die Überlegung, dass eine quotale Befriedigung im Rahmen eines Insolvenzverfahrens oft wesentlich geringer ausfallen würde als die durch den Vergleich realisierte Teilzahlung. Das Risiko, im Falle der Insolvenz eine Teilzahlung im Rahmen der Insolvenzanfechtung aber wieder zurückgewähren zu müssen, macht einen Forderungsverzicht weniger attraktiv. Mit Urteil vom 28.01.2016 hat der BGH nun entschieden, dass eine Insolvenzanfechtung mangels Gläubigerbenachteiligung ausscheidet, wenn der in der Teilzahlung liegende Vermögensverlust durch den damit verbundenen Verzicht auf die Restforderung voll ausgeglichen wird. Im Folgenden wird untersucht, ob dieses Urteil als Blaupause für eine anfechtungsfeste Restrukturierung einzelner Verbindlichkeiten dienen kann.
Y1  - 2016
SN  - 0005-9935
N1  - Printausgabe in der Bibliothek Eupener Str. vorhanden: 43 Z 364
VL  - 69
IS  - 17
SP  - 999
EP  - 1001
PB  - Fachmedien Otto Schmidt
CY  - Düsseldorf
ER  -