TY  - JOUR
A1  - Winckler, Silvia
A1  - Krueger, Rolf
A1  - Schnitzler, Thomas
A1  - Zang, Werner
A1  - Fischer, Rainer
A1  - Biselli, Manfred
T1  - A sensitive monitoring system for mammalian cell cultivation processes: a PAT approach
JF  - Bioprocess and biosystems engineering
N2  - Biopharmaceuticals such as antibodies are produced in cultivated mammalian cells, which must be monitored to comply with good manufacturing practice. We, therefore, developed a fully automated system comprising a specific exhaust gas analyzer, inline analytics and a corresponding algorithm to precisely determine the oxygen uptake rate, carbon dioxide evolution rate, carbon dioxide transfer rate, transfer quotient and respiratory quotient without interrupting the ongoing cultivation, in order to assess its reproducibility. The system was verified using chemical simulation experiments and was able to measure the respiratory activity of hybridoma cells and DG44 cells (derived from Chinese hamster ovary cells) with satisfactory results at a minimum viable cell density of ~2.0 × 10⁵ cells ml⁻¹. The system was suitable for both batch and fed-batch cultivations in bubble-aerated and membrane-aerated reactors, with and without the control of pH and dissolved oxygen.
Y1  - 2014
U6  - http://dx.doi.org/10.1007/s00449-013-1062-8
SN  - 1615-7591 (Print) 1615-7605 (Online)
VL  - 37
IS  - 5
SP  - 901
EP  - 912
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - JOUR
A1  - Böhnisch, Nils
A1  - Braun, Carsten
A1  - Muscarello, Vincenzo
A1  - Marzocca, Pier
T1  - A sensitivity study on aeroelastic instabilities of slender wings with a large propeller
JF  - AIAA SCITECH 2023 Forum
N2  - Next-generation aircraft designs often incorporate multiple large propellers attached along the wingspan. These highly flexible dynamic systems can exhibit uncommon aeroelastic instabilities, which should be carefully investigated to ensure safe operation. The interaction between the propeller and the wing is of particular importance. It is known that whirl flutter is stabilized by wing motion and wing aerodynamics. This paper investigates the effect of a propeller onto wing flutter as a function of span position and mounting stiffness between the propeller and wing. The analysis of a comparison between a tractor and pusher configuration has shown that the coupled system is more stable than the standalone wing for propeller positions near the wing tip for both configurations. The wing fluttermechanism is mostly affected by the mass of the propeller and the resulting change in eigenfrequencies of the wing. For very weak mounting stiffnesses, whirl flutter occurs, which was shown to be stabilized compared to a standalone propeller due to wing motion. On the other hand, the pusher configuration is, as to be expected, the more critical configuration due to the attached mass behind the elastic axis.
Y1  - 2023
U6  - http://dx.doi.org/10.2514/6.2023-1893
N1  - AIAA SCITECH 2023 Forum, 23-27 January 2023, National Harbor, MD & Online
SP  - 1
EP  - 14
PB  - AIAA
ER  - 
TY  - JOUR
A1  - Harzheim, Thomas
A1  - Mühmel, Marc
A1  - Heuermann, Holger
T1  - A SFCW harmonic radar system for maritime search and rescue using passive and active tags
JF  - International Journal of Microwave and Wireless Technologies
N2  - This paper introduces a new maritime search and rescue system based on S-band illumination harmonic radar (HR). Passive and active tags have been developed and tested while attached to life jackets and a small boat. In this demonstration test carried out on the Baltic Sea, the system was able to detect and range the active tags up to a distance of 5800 m using an illumination signal transmit-power of 100 W. Special attention is given to the development, performance, and conceptual differences between passive and active tags used in the system. Guidelines for achieving a high HR dynamic range, including a system components description, are given and a comparison with other HR systems is performed. System integration with a commercial maritime X-band navigation radar is shown to demonstrate a solution for rapid search and rescue response and quick localization.
KW  - Radar
KW  - microwave measurements
KW  - harmonic radar
KW  - harmonic radar tags
KW  - nonlinear VNA measurements
Y1  - 2021
U6  - http://dx.doi.org/10.1017/S1759078721000520
VL  - 13
IS  - Special Issue 7
SP  - 691
EP  - 707
PB  - Cambridge University Press
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Buß, G.
A1  - Faßbender, F.
A1  - Glück, O.
A1  - Schmitt, G.
A1  - Schultze, J. W.
A1  - Lüth, H.
T1  - A silicon-based microelectrode array for chemical analysis
JF  - Sensors and Actuators B. 65 (2000), H. 1-3
Y1  - 2000
SN  - 0925-4005
SP  - 284
EP  - 287
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Buß, G.
A1  - Faßbender, F.
A1  - Glück, O.
A1  - Schmitt, G.
A1  - Schultze, J. W.
A1  - Lüth, H.
T1  - A silicon-based microelectrode array for chemical analysis
JF  - Proceedings of the Seventh International Meeting on Chemical Sensors : 27 - 30 July, 1998, Beijing, P. R. China / ed. Zhi-Gang Zhou
Y1  - 1998
N1  - International Meeting on Chemical Sensors ; (7, 1998, Beijing) ; International Meeting on Chemical Sensors (IMCS) ; (7 : ; 1998.07.27-30 : ; Beijing)
SP  - 100
EP  - 102
PB  - Elsevier
CY  - Amsterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Pouyeshman, S.
A1  - Schnitzler, Thomas
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Biselli, Manfred
A1  - Schöning, Michael Josef
T1  - A silicon-based multi-sensor chip for monitoring of fermentation processes
JF  - Physica status solidi (a) : applications and material science. 208 (2011), H. 6
Y1  - 2011
SN  - 1862-6319
SP  - 1364
EP  - 1369
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Weidenbrück, B.
A1  - Thust, M.
A1  - Kordos, P.
A1  - Lüth, H.
T1  - A silicon-based sensor array with capacitive EIS structures
JF  - Proceedings of the 11th European Conference on Solid-State Transducers / Eurosensors XI, September 21 - 24, 1997, Warsaw, Poland. [Organised by] Warsaw University of Technology. Vol 2.
Y1  - 1997
SN  - 83-908335-0-6
N1  - Eurosensors ; (11, 1997, Warszawa) ; Eurosensors - European Conference on Solid-State Transducers ; (11 : ; 1997.09.21-24 : ; Warsaw)
SP  - 871
EP  - 874
PB  - Sensor Lab Sp.
CY  - Warsaw
ER  - 
TY  - JOUR
A1  - Pieper, Martin
A1  - Klein, Peter
T1  - A simple and accurate numerical network flow model for bionic micro heat exchangers
JF  - Heat mass transfer
Y1  - 2011
SN  - 0947-7411
VL  - 47
IS  - 5
SP  - 491
EP  - 503
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Prume, Klaus
A1  - Booij, W. E.
A1  - Vogl, A. H.
A1  - Wang, D. T.
T1  - A simple and powerful analytical model for MEMS piezoelectric multimorphs  / Booij, W. E. ; Vogl, A. H. ; Wang, D. T. ; Tyholdt, F. ; Ostbo, N. P. ; Raeder, H. ; Prume, K.
JF  - Journal of Electroceramics. 19 (2007), H. 4
Y1  - 2007
SN  - 1385-3449
SP  - 387
EP  - 393
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Beck, Daniel
A1  - Lakemeyer, Gerhard
T1  - A Simulation Environment for Middle-Size Robots with Multi-level Abstraction / Beck, Daniel ; Ferrein, Alexander ; Lakemeyer, Gerhard
JF  - RoboCup 2007: Robot Soccer World Cup XI
Y1  - 2007
SN  - 978-3-540-68846-4
N1  - Lecture Notes in Computer Science ; 5001
SP  - 136
EP  - 147
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Ball, Andrew J.
A1  - Ulamec, Stephan
A1  - Price, Michael E.
T1  - A small mission for in situ exploration of a primitive binary near-Earth asteroid  / Ball, Andrew J. ; Ulamec, Stephan ; Dachwald, Bernd ; Price, Michael E. ; [u.a.]
JF  - Advances in Space Research. 43 (2009), H. 2
Y1  - 2009
SN  - 0273-1177
SP  - 317
EP  - 324
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Hillen, Walter
A1  - Alper Selver, M.
A1  - Fischer, Felix
A1  - Kuntalp, Mehmet
T1  - A software tool for interactive generation, representation, and systematical storage of transfer functions for 3D medical images / Alper Selver, M. ; Fischer, Felix ; Kuntalp, Mehmet ; Hillen, Walter
JF  - Computer Methods and Programs in Biomedicine. 86 (2007), H. 3
Y1  - 2007
SN  - 0169-2607
SP  - 270
EP  - 280
PB  - -
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - A Solution to the Scheduling Problem Taking into Account Quality
JF  - Operations research '91 : extended abstracts of the 16th Symposium on Operations Research held at the University of Trier at September 9 - 11, 1991 / [GMÖOR]. Peter Gritzmann ... (eds.)
Y1  - 1991
SN  - 3790806080
N1  - Symposium on Operations Research ; (16, 1991, Trier)
SP  - 373
EP  - 375
PB  - Physica-Verl.
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Monakhova, Yulia
A1  - Diehl, Bernd W. K.
T1  - A step towards optimization of the qNMR workflow: proficiency testing exercise at an GxP-accredited laboratory
JF  - Applied Magnetic Resonance
N2  - Quantitative nuclear magnetic resonance (qNMR) is considered as a powerful tool for multicomponent mixture analysis as well as for the purity determination of single compounds. Special attention is currently paid to the training of operators and study directors involved in qNMR testing. To assure that only qualified personnel are used for sample preparation at our GxP-accredited laboratory, weighing test was proposed. Sixteen participants performed six-fold weighing of the binary mixture of dibutylated hydroxytoluene (BHT) and 1,2,4,5-tetrachloro-3-nitrobenzene (TCNB). To evaluate the quality of data analysis, all spectra were evaluated manually by a qNMR expert and using in-house developed automated routine. The results revealed that mean values are comparable and both evaluation approaches are free of systematic error. However, automated evaluation resulted in an approximately 20% increase in precision. The same findings were revealed for qNMR analysis of 32 compounds used in pharmaceutical industry. Weighing test by six-fold determination in binary mixtures and automated qNMR methodology can be recommended as efficient tools for evaluating staff proficiency. The automated qNMR method significantly increases throughput and precision of qNMR for routine measurements and extends application scope of qNMR.
Y1  - 2021
U6  - http://dx.doi.org/10.1007/s00723-021-01324-3
SN  - 1613-7507
N1  - Corresponding author: Yulia Monakhova
VL  - 52
SP  - 581
EP  - 593
PB  - Springer Nature
CY  - Wien
ER  - 
TY  - JOUR
A1  - Reißel, Martin
A1  - Bitsch, G.
A1  - Stamm, H.
T1  - A Stern Door Slam Fatigue Calculation / Bitsch, G. ; Reißel, M. ; Stamm, H.
JF  - Proceedings of the 18. CAD-FEM Users Meeting
Y1  - 2000
ER  - 
TY  - JOUR
A1  - Faßbender, Heinz
A1  - Maneth, Sebastian
T1  - A strict border for the decidability of e-unification for recursive functions / Faßbender, Heinz ; Maneth, Sebastian
JF  - Algebraic and logic programming : proceedings / 5th International Conference, ALP '96, Aachen, Germany, September 25 - 27, 1996. Michael Hanus ... (ed.)
Y1  - 1996
SN  - 3-540-61735-3
N1  - (Lecture notes in computer science ; 1139)
SP  - 194
EP  - 208
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Faßbender, Heinz
A1  - Maneth, Sebastian
T1  - A strict border for the decidability of e-unification for recursive functions / Faßbender, Heinz ; Maneth, Sebastian
JF  - Journal of functional and logic programming. 1998 (1998), H. 4
Y1  - 1998
SN  - 1080-5230
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
T1  - A Synthesis Technique for Mono- and Mixed-Mode Symmetrical Filter
JF  - Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association . Vol. 1
Y1  - 2004
SN  - 1-580-53992-0
N1  - European Microwave Conference ; (34, 2004, Amsterdam) ; European Microwave Week ; (7, 2004, Amsterdam)
SP  - 309
EP  - 312
PB  - Horizon House Publ
CY  - London
ER  - 
TY  - JOUR
A1  - Wissenbach, U.
A1  - Six, S.
A1  - Bongaerts, Johannes
A1  - Ternes, D.
A1  - Steinwachs, S.
A1  - Unden, G.
T1  - A third periplasmic transport system for l-arginine in Escherichia coli: molecular characterization of the artPIQMJ genes, arginine binding and transport
JF  - Molecular microbiology
Y1  - 1995
SN  - 1365-2958 (E-Journal); 0950-382x (Print)
VL  - Vol. 17
IS  - Iss. 4
SP  - 675
EP  - 686
ER  - 
TY  - JOUR
A1  - Gebhardt, Michael
A1  - Jarke, Matthias
A1  - Jacobs, Stephan
T1  - A Toolkit for Negotiation Support Interfaces to Multidimensional Data
JF  - SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman
Y1  - 1997
SN  - 0897919114
N1  - International Conference on Management of Data ; (1997, Tucson, Ariz.)
PB  - ACM Press
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Jochim, Haldor E.
T1  - A traffic resistance model of long-distance travel
JF  - Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of
Y1  - 2004
SN  - 3-89301-180-3
N1  - International Symposium on Networks for Mobility (2, 2004, Stuttgart)
PB  - FOVUS
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Kraff, Oliver
A1  - Bitz, Andreas
A1  - Breyer, Tobias
A1  - Kruszona, Stefan
A1  - Maderwald, Stefan
A1  - Brote, Irina
A1  - Gizewski, Elke R.
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
T1  - A transmit/receive radiofrequency array for imaging the carotid arteries at 7 Tesla: coil design and first in vivo results
JF  - Investigative Radiology
N2  - Objective: 
To develop a transmit/receive radiofrequency (RF) array for magnetic resonance imaging (MRI) of the carotid arteries at 7 T. The prototype is characterized in numerical simulations and bench measurements, and the feasibility of plaque imaging at 7 T is demonstrated in first in vivo images.

Materials and Methods: 
The RF phased array coil consists of 8 surface loop coils. To allow imaging of both sides of the neck, the RF array is divided into 2 coil clusters, each with 4 overlapping loop elements. For safety validation, numerical computations of the RF field distribution and the corresponding specific absorption rate were performed on the basis of a heterogeneous human body model. To validate the coil model, maps of the transmit B1+ field were compared between simulation and measurement. In vivo images of a healthy volunteer and a patient (ulcerating plaque and a 50% stenosis of the right internal carotid artery) were acquired using a 3-dimensional FLASH sequence with a high isotropic spatial resolution of 0.54 mm as well as using pulse-triggered proton density (PD)/T2-weighted turbo spin echo sequences.

Results: 
Measurements of the S-parameters yielded a reflection and isolation of the coil elements of better than −18 and −13 dB, respectively. Measurements of the g-factor indicated good image quality for parallel imaging acceleration factors up to 2.4. A similar distribution and a very good match of the absolute values were found between the measured and simulated B1+ transmit RF field for the validation of the coil model. In vivo images revealed good signal excitation of both sides of the neck and a high vessel-to-background image contrast for the noncontrast-enhanced 3-dimensional FLASH sequence. Imaging at 7 T could depict the extent of stenosis, and revealed the disruption and ulcer of the plaque.

Conclusions: 
This study demonstrates that 2 four-channel transmit/receive RF arrays for each side of the neck is a suitable concept for in vivo MRI of the carotid arteries at 7 Tesla. Further studies are needed to explore and exploit the full potential of 7 T high-field MRI for carotid atherosclerotic plaque imaging.
Y1  - 2011
U6  - http://dx.doi.org/10.1097/RLI.0b013e318206cee4
SN  - 1536-0210
VL  - 46
IS  - 4
SP  - 246
EP  - 254
PB  - Wolters Kluwer
CY  - Köln
ER  - 
TY  - JOUR
A1  - Selmer, Thorsten
A1  - Thamer, Wiebke
A1  - Cirpus, Irina
A1  - Hans, Marcus
T1  - A two [4Fe-4S]-cluster-containing ferredoxin as an alternative electron donor for 2-hydroxyglutaryl-CoA dehydratase from Acidaminococcus fermentans / Thamer, Wiebke ; Cirpus, Irina ; Hans, Marcus ; Pierik, Antonio, J. ; Selmer, Thorsten ; Bill, Eckhard ;
JF  - Archives of Microbiology. 179 (2003), H. 3
Y1  - 2003
SN  - 1432-072X
SP  - 197
EP  - 204
ER  - 
TY  - JOUR
A1  - Kühn, Raoul-Roman
A1  - Haugner, Werner
A1  - Staat, Manfred
A1  - Sponagel, Stefan
T1  - A Two Phase Mixture Model based on Bone Observation
N2  - An optimization method is developed to describe the mechanical behaviour of the human cancellous bone. The method is based on a mixture theory. A careful observation of the behaviour of the bone material leads to the hypothesis that the bone density is controlled by the principal stress trajectories (Wolff’s law). The basic idea of the developed method is the coupling of a scalar value via an eigenvalue problem to the principal stress trajectories. On the one hand this theory will permit a prediction of the reaction of the biological bone structure after the implantation of a prosthesis, on the other hand it may be useful in engineering optimization problems. An analytical example shows its efficiency.
KW  - Knochen
KW  - Knochenbildung
KW  - Knochenchirugie
KW  - Strukturanalyse
KW  - Schwammknochen
KW  - Knochendichte
KW  - Wolffsches Gesetz
KW  - bone structure
KW  - bone density
KW  - Wolff's Law
KW  - cancellous bone
Y1  - 2004
ER  - 
TY  - JOUR
A1  - Hardt, Arno
A1  - Köhler, M.
A1  - Müller, K. D.
A1  - Stoff, H.
T1  - A two-dimensional position sensitive charged-particle detector for the magnetic spectrograph "BIG KARL" of the Jülich Cyclotron "JULIC". M. Köhler, K. D. Müller, H. Stoff, M. Teske, G. P. A. Berg, A. Hardt, S. Martin, C. Mayer-Böricke ,  J. Meißburger
JF  - Nuclear Instruments and Methods. 75 (1980), H. 2-3
Y1  - 1980
SN  - 0029-554X
SP  - 357
EP  - 362
ER  - 
TY  - JOUR
A1  - Faßbender, Heinz
A1  - Vogler, Heiko
T1  - A universal unification algorithm based on unification-driven leftmost outermost narrowing
JF  - Acta Cybernetica. 11 (1994), H. 3
Y1  - 1994
SN  - 0324-721x
SP  - 139
EP  - 167
ER  - 
TY  - JOUR
A1  - Faßbender, Heinz
T1  - A verified implementation of narrowing
JF  - Programming languages: implementations, logics and programs : proceedings / 7th International Symposium, PLILP '95, Utrecht, The Netherlands, September 20 - 22, 1995. Manuel Hermenegildo ... (ed.)
Y1  - 1995
SN  - 3-540-60359-X
N1  - (Lecture notes in computer science ; 982)
SP  - 63
EP  - 80
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Stock, J.
A1  - Malindretos, J.
A1  - Indlekofer, K.M.
A1  - Pöttgens, Michael
A1  - Förster, Arnold
A1  - Lüth, Hans
T1  - A Vertical Resonant Tunneling Transistor for Application in Digital Logic Circuits
JF  - IEEE Transactions on Electron Devices (T-ED). 48 (2001), H. 6
Y1  - 2001
SN  - 0018-9383
SP  - 1028
EP  - 1032
ER  - 
TY  - JOUR
A1  - Bergmann, Sandra
A1  - Demuth, Bastian
A1  - Sander, Volker
T1  - A Web Framework for Workflow Submission and Monitoring via UNICORE 6 based on Distributable Scientific Workflow Templates
JF  - UNICORE Summit 2011 : proceedings, 7-8 July 2011, Torun, Poland / Mathilde Romberg ... (Eds.)
Y1  - 2011
SN  - 9783893367504
N1  - UNICORE Summit ; (2011 ; 2011.07.07-08 ; Torun) ; Schriften des Forschungszentrums Jülich IAS Series 9
SP  - 45
EP  - 50
PB  - Forschungszentrum Jülich
CY  - Jülich
ER  - 
TY  - JOUR
A1  - Simonis, A.
A1  - Krings, T.
A1  - Lüth, H.
A1  - Wang, J.
A1  - Schöning, Michael Josef
T1  - A „hybrid“ thin-film pH sensor with integrated thick-film reference
JF  - Sensors. 1 (2001), H. 6
Y1  - 2001
SN  - 1424-8220
SP  - 183
EP  - 192
ER  - 
TY  - JOUR
A1  - Golland, Alexander
A1  - Engling, Christoph
T1  - a-i3/BSI Symposium 2014: Sicherheit von Daten und Identitäten angesichts NSA und Big Data
JF  - DSB Datenschutz-Berater
Y1  - 2014
SN  - 0170-7256
VL  - 38
IS  - 7-8
SP  - 165
EP  - 166
PB  - dfv Mediengruppe
CY  - Frankfurt a.M.
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
A1  - Schmitt, W.
A1  - Meissen, Th.
T1  - Aachen 3D finger. 3D digitizer for application in dentistry / Schmitt, W. ; Pawelke, S. ; Meissen, Th.
JF  - Biomedizinische Technik. 35 (1990), H. 4
Y1  - 1990
SN  - 0013-5585
SP  - 69
EP  - 71
ER  - 
TY  - JOUR
A1  - Naujokat, Anke
T1  - Aachen: Colourdome
JF  - Bauwelt. 93 (2002), H. 37
Y1  - 2002
SN  - 0931-6590
SP  - 2
ER  - 
TY  - JOUR
A1  - Naujokat, Anke
T1  - Aachen: Deimel und Wittmar : jene zwanziger Jahre
JF  - Bauwelt. 96  (2005), H. 7
Y1  - 2005
SN  - 0931-6590
SP  - 6
EP  - 7
ER  - 
TY  - JOUR
A1  - Naujokat, Anke
T1  - Aachen: Europäisches Kulturzentrum "Bauhaus Europa"
JF  - Bauwelt. 97  (2006), H. 6
Y1  - 2006
SN  - 0931-6590
SP  - 6
ER  - 
TY  - JOUR
A1  - Naujokat, Anke
T1  - Aachen: Grau Blau Grün : der Emscher Landschaftspark
JF  - Bauwelt. 96  (2005), H. 29
Y1  - 2005
SN  - 0931-6590
SP  - 3
ER  - 
TY  - JOUR
A1  - Naujokat, Anke
T1  - Aachen: Symposium - Maulnes und der Manierismus in Frankreich
JF  - Bauwelt. 92 (2001), H. 22
Y1  - 2001
SN  - 0931-6590
SP  - 4
ER  - 
TY  - JOUR
A1  - Alt, Helmut
T1  - Ab 1975 Uranerz aus Rabbit-Lake
JF  - Energiewirtschaftliche Tagesfragen
Y1  - 1974
SN  - 0720-6240
VL  - 24
IS  - 1/2
SP  - 34
PB  - VDE-Verlag
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Mang, Thomas
T1  - Abdichtmaterialien gegen drückendes Wasser
JF  - Bauchemie von der Forschung bis zur Praxis : 3. Tagung Bauchemie in Würzburg ; 27./28. September 2001 in Würzburg / GDCh-Fachgruppe Bauchemie ; [Red.: W. Hiller ...]
Y1  - 2002
SN  - 3-936028-04-4
N1  - Tagung Bauchemie <3, 2001, Würzburg> GdCh-Monographie 24 ; Monographie / GDCh, Gesellschaft Deutscher Chemiker ; 24
SP  - 65
PB  - GDCh
CY  - Frankfurt am Main
ER  - 
TY  - JOUR
A1  - Mang, Thomas
A1  - Haulena, Friedhelm
T1  - Abdichtmaterialien gegen drückendes Wasser und Diesel mit verbesserter Umweltverträglichkeit
JF  - Internationale Zeitschrift für Bauinstandsetzen und Baudenkmalpflege = International journal for restoration of buildings and monuments. 5 (1999), H. 1
Y1  - 1999
SN  - 0947-4498
SP  - 57
ER  - 
TY  - JOUR
A1  - Kettern, Jürgen
A1  - Frechen, F. B.
T1  - Abfallentsorgung und Geruchsemissionen. Tl.1. Grundlagen und Problematik / Frechen, F. B.; Kettern, J. T.
JF  - Entsorgungspraxis. 13 (1995), H. 1/2
Y1  - 1995
SN  - 0724-6870
N1  - Fortsetzung in: Entsorgungspraxis 13(1995), Nr. 3
SP  - 58
EP  - 62
ER  - 
TY  - JOUR
A1  - Kettern, Jürgen
A1  - Frechen, F. B.
T1  - Abfallentsorgung und Geruchsemissionen. Tl.2. Minderungsmaßnahmen / Frechen, F. B.; Kettern, J. T.
JF  - Entsorgungspraxis. 13 (1995), H. 1/2
Y1  - 1995
SN  - 0724-6870
N1  - Fortsetzung aus: Entsorgungs-Praxis 13(1995), Nr.1/2.
SP  - 40
EP  - 43
ER  - 
TY  - JOUR
A1  - Biener, Ernst
T1  - Abfallwirtschaft
JF  - Bautechnische Zahlentafeln, m. CD-ROM / Wendehorst. Hrsg. von Otto W.  Wetzell. Bearb. von: Herwig Baumgartner ... 31., vollst. überarb. und aktualisierte Aufl.
Y1  - 2004
SN  - 3-519-55002-4
N1  - Abschnitt 16
SP  - 1259
EP  - 1292
PB  - Teubner [u.a.]
CY  - Stuttgart [u.a.]
ER  - 
TY  - JOUR
A1  - Biener, Ernst
T1  - Abfallwirtschaft
JF  - Bautechnische Zahlentafeln / Wendehorst. Hrsg.: Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... - 30., akt. u.  erw. Aufl.
Y1  - 2002
SN  - 3-519-45002-X
SP  - 1155
EP  - 1187
PB  - Teubner
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Biener, Ernst
T1  - Abfallwirtschaft
JF  - Bautechnische Zahlentafeln : mit 225 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert  Achten ... - 29., neubearb. Aufl.
Y1  - 2000
SN  - 3-519-35002-5
SP  - 1273
EP  - 1303
PB  - Teubner [u.a.]
CY  - Stuttgart [u.a.]
ER  - 
TY  - JOUR
A1  - Biener, Ernst
T1  - Abfallwirtschaft
JF  - Bautechnische Zahlentafeln : mit 245 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 27., neubearb. und erw. Aufl.
Y1  - 1996
SN  - 3-519-15002-6
SP  - 1271
EP  - 1298
PB  - Teubner [u.a.]
CY  - Stuttgart [u.a.]
ER  - 
TY  - JOUR
A1  - Biener, Ernst
T1  - Abfallwirtschaft
JF  - Bautechnische Zahlentafeln : mit 194 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 26., neubearb. und erw. Aufl.
Y1  - 1994
SN  - 3-519-05002-1
SP  - 1089
EP  - 1102
PB  - Teubner [u.a.]
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Biener, Ernst
T1  - Abfallwirtschaft
JF  - Bautechnische Zahlentafeln / Wendehorst, Reinhard ; Wetzell, Otto W. [Hrsg.] 32., vollst. aktualisierte Aufl.
Y1  - 2007
SN  - 978-3-8351-0055-8
SP  - 1291
EP  - 1330
PB  - Teubner
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Biener, Ernst
T1  - Abfallwirtschaft
JF  - Wendehorst Beispiele aus der Baupraxis / Wetzell, Otto W. ; Baumgartner, Herwig ; Wendehorst, Reinhard [Hrsg.].
Y1  - 2007
SN  - 978-3-8351-0069-5
N1  - Kapitel 15
SP  - 433
EP  - 463
PB  - Teubner
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
A1  - Butzer, Paul L.
T1  - Ableitungen von trigonometrischen Approximationsprozessen
JF  - Acta scientiarum mathematicarum / Institutum Bolyaianum Universitatis Szegediensis
Y1  - 1967
SN  - 0001-6969
VL  - 28
IS  - 1-2
SP  - 173
EP  - 183
PB  - n.a.
CY  - Szeged
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Kloock, Joachim P.
T1  - About 20 years of silicon-based thin-film sensors with chalcogenide glass materials for heavy metal analysis: Technological aspects of fabrication and miniaturization
JF  - Electroanalysis. 19 (2007), H. 19-20
Y1  - 2007
SN  - 1040-0397
SP  - 2029
EP  - 2038
ER  - 
TY  - JOUR
A1  - Böhnisch, Nils
A1  - Braun, Carsten
A1  - Muscarello, Vincenzo
A1  - Marzocca, Pier
T1  - About the wing and whirl flutter of a slender wing–propeller system
JF  - Journal of Aircraft
N2  - Next-generation aircraft designs often incorporate multiple large propellers attached along the wingspan (distributed electric propulsion), leading to highly flexible dynamic systems that can exhibit aeroelastic instabilities. This paper introduces a validated methodology to investigate the aeroelastic instabilities of wing–propeller systems and to understand the dynamic mechanism leading to wing and whirl flutter and transition from one to the other. Factors such as nacelle positions along the wing span and chord and its propulsion system mounting stiffness are considered. Additionally, preliminary design guidelines are proposed for flutter-free wing–propeller systems applicable to novel aircraft designs. The study demonstrates how the critical speed of the wing–propeller systems is influenced by the mounting stiffness and propeller position. Weak mounting stiffnesses result in whirl flutter, while hard mounting stiffnesses lead to wing flutter. For the latter, the position of the propeller along the wing span may change the wing mode shapes and thus the flutter mechanism. Propeller positions closer to the wing tip enhance stability, but pusher configurations are more critical due to the mass distribution behind the elastic axis.
Y1  - 2024
U6  - http://dx.doi.org/10.2514/1.C037542
SN  - 1533-3868
SP  - 1
EP  - 14
PB  - American Institute of Aeronautics and Astronautics
ER  - 
TY  - JOUR
A1  - Fuchs, Britta
A1  - Ritz, Thomas
T1  - Absatzkanäle kaum verknüpft
JF  - IT-Mittelstand : IT-Business im Mittelstand
Y1  - 2011
VL  - 2011
IS  - 9
SP  - 16
PB  - Medienhaus-Verlag
CY  - Bergisch-Gladbach
ER  - 
TY  - JOUR
A1  - Hagemann, Hans-Jürgen
A1  - Geittner, P.
A1  - Schnittker, W.
A1  - Warnier, J.
T1  - Abscheidegeschwindigkeiten und Prozeßausbeuten im PCVD-Verfahren. Geittner, P.; Hagemann, H. J.; Schnittker, W.; Warnier, J.; Weling, F.; Wilson, H.
JF  - Philips - Unsere Forschung in Deutschland / Hrsg.: Philips Forschungslaboratorium GmbH Aachen und Hamburg. 4 (1989)
Y1  - 1989
SP  - 140
EP  - 143
ER  - 
TY  - JOUR
A1  - Olbertz, Klaus
T1  - Abschlagsfreie Rente mit 63 - Die wichtigsten Fragestellungen und Lösungen für die Praxis
JF  - NWB - Steuer- und Wirtschaftsrecht
Y1  - 2018
SN  - 1860-9449
IS  - 15
SP  - 1263
EP  - 1270
PB  - NWB Verlag
CY  - Herne
ER  - 
TY  - JOUR
A1  - Schneider, Bettina
A1  - Schneider, Wilhelm
T1  - Abschlussarbeiten FAQ / FGA
JF  - Wirtschaftswissenschaftliches Studium : Wist ; Zeitschrift für Ausbildung und Hochschulkontakt. 35 (2006), H. 9
Y1  - 2006
SN  - 0340-1650
N1  - in der Bereichsbibliothek Eupener Str. vorhanden unter 43 Z 098-2006
SP  - 537
EP  - 539
ER  - 
TY  - JOUR
A1  - Siepmann, Thomas
T1  - Abschlußbericht zum Vorhaben Nr. 22/IV
JF  - Forschungsvereinigung Antriebstechnik: Forschungsreport
Y1  - 1986
PB  - FVA
CY  - Frankfurt/M.
ER  - 
TY  - JOUR
A1  - Paschmann, Hans
A1  - Spanka, Gerhard
T1  - Abschätzung des Eindringverhaltens organischer Flüssigkeiten in Beton anhand von Stoffkennwerten
JF  - Beton. 44 (1994), H. 12
Y1  - 1994
SN  - 0005-9846
SP  - 738
EP  - 743
ER  - 
TY  - JOUR
A1  - Breitbach, Gerd
A1  - David, P.-H.
A1  - Lohnert, G.-H.
T1  - Abschätzung des langfristigen Lufteintrags nach einem Druckentlastungsstörfall des HTR-Modul
JF  - Jahrestagung Kerntechnik '84 : Alte Oper, Frankfurt, 22. - 24. Mai 1984 ; Tagungsbericht / Kerntechnische Gesellschaft
Y1  - 1984
SN  - 0173-0924
N1  - Kerntechnische Gesellschaft. - Jahrestagung Kerntechnik <1984, Frankfurt/M.>. -  2. ISSN: 0720-9207
SP  - 287
EP  - 290
PB  - Deutsches Atomforum
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Hoyler, Friedrich
A1  - Petkov, P.
A1  - Andrejtscheff, W.
T1  - Absolute E0, E1 and E2 transition rates in even-even nuclei obtained in thermal neutron capture  / P. Petkov ; W. Andrejtscheff ... F. Hoyler ...
JF  - Journal of Physics G. 14 (1988), H. S
Y1  - 1988
SN  - 0305-4616
SP  - S97
EP  - S102
ER  - 
TY  - JOUR
A1  - Mang, Thomas
A1  - Hodenius, M. A. J.
A1  - Schmitz-Rode, T.
A1  - Baumann, M.
T1  - Absorption of 10-hydroxycamptothecin into the coat of magnetoliposomes / Hodenius, M. A. J. ; Schmitz-Rode, T. ; Baumann, M. ; Ivoanova, G. ; Wong, J. E. ; Mang, T. ; Haulena, F. ; Soenen, S. J. H. ; De Cuyper, M.
JF  - Colloids and Surfaces A: Physicochemical and Engineering Aspects. 343 (2009), H. 1-3
Y1  - 2009
SN  - 0927-7757
N1  - Colloid and Surface Science for Nanotechnology
SP  - 20
EP  - 23
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Abstracting Away Low-Level Details in Service Robotics with Fuzzy Fluents
JF  - Model-Driven Knowledge Engineering for Improved Software Modularity in Robotics and Automation.
Workshop at European Robotics Forum 2015
Vienna, Austria, March 11-13, 2015.
Y1  - 2015
SP  - 1
EP  - 4
ER  - 
TY  - JOUR
A1  - Müller, Karsten
A1  - Billmaier, Karl
A1  - Müller, Ernst A.
T1  - Abwasserwärmenutzung
JF  - Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5
Y1  - 2013
SN  - 1438-5716
SP  - 24
EP  - 26
PB  - Deutscher Fachverlag
CY  - Frankfurt am Main
ER  - 
TY  - JOUR
A1  - Mertens, Josef
A1  - Klevenhusen, K. D.
A1  - Jakob, H.
T1  - Accurate Transonic Wave Drag Prediction Using Simple Physical Models
JF  - AIAA-Journal. 25 (1987), H. 6
Y1  - 1987
SN  - 0001-1452
SP  - 799
EP  - 805
ER  - 
TY  - JOUR
A1  - Selmer, Thorsten
A1  - Hetzel, Marc
A1  - Brock, Matthias
A1  - Pierik, Antonio J.
T1  - Acryloyl-CoA reductase from Clostridium propionicum. An enzyme complex of propionyl-CoA dehydrogenase and electron-transferring flavoprotein  / Hetzel, Marc ; Brock, Matthias ; Selmer, Thorsten, Pierik, Antonio J. ; Golding, Bernard T. ; Buckel, Wolfgang
JF  - European Journal of Biochemistry. 270 (2003), H. 5
Y1  - 2003
SN  - 0014-2956
SP  - 902
EP  - 910
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Dylla, Frank
A1  - Lakemeyer, Gerhard
T1  - Acting and Deliberating using Golog in Robotic Soccer - A Hybrid Architecture / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard
JF  - Proc. 3rd International Cognitive Robotics Workshop (CogRob 2002)
Y1  - 2002
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
A1  - Vassos, Stavros
T1  - Action-Based Imperative Programming with YAGI
N2  - Many tasks for autonomous agents or robots are best described by a specification of the environment and a specification of the available actions the agent or robot can perform. Combining such a specification with the possibility to imperatively program a robot or agent is what we call the actionbased imperative programming. One of the most successful such approaches is Golog. In this paper, we draft a proposal for a new robot programming language YAGI, which is based on the action-based imperative programming paradigm. Our goal is to design a small, portable stand-alone YAGI interpreter. We combine the benefits of a principled domain specification with a clean, small and simple programming language, which does not exploit any side-effects from the implementation language. We discuss general requirements of action-based programming languages and outline YAGI, our action-based language approach which particularly aims at embeddability.
Y1  - 2012
N1  - Cognitive Robotics
AAAI Technical Report WS-12-06
SP  - 24
EP  - 31
ER  - 
TY  - JOUR
A1  - Pohl, Martina
A1  - Siegert, Petra
A1  - Mesch, K.
A1  - Bruhn, H.
A1  - Grötzinger, Joachim
T1  - Active site mutants of pyruvate decarboxylase from Zymomonas mobilis : a site-directed mutagenesis study of L112, I472, I476, E473 and N482
JF  - European journal of biochemistry
Y1  - 1998
SN  - 1432-1033 (E-Journal); 1742-4658 (E-Journal); 0014-2956 (Print); 1742-464X (Print)
VL  - Vol. 257
IS  - Iss. 3
SP  - 538
EP  - 546
ER  - 
TY  - JOUR
A1  - Berretz, Frank
A1  - Skorupa, Sasche
A1  - Sander, Volker
A1  - Belloum, Adam
A1  - Bubak, Marian
T1  - Actor-Driven Workflow Execution in Distributed Environments
JF  - Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)
Y1  - 2011
SN  - 978-3-642-21877-4
N1  - Lecture Notes in Computer Science ; 6586
SP  - 287
EP  - 294
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Ritz, Thomas
A1  - Stender, Michael
ED  - Weisbecker, Anette
T1  - Ad-hoc Anwendungsintegration mit mobilen CRM-Systement
JF  - Electronic Business : Innovationen, Anwendungen und Technologien
Y1  - 2004
SN  - 3-8167-6621-8
SP  - 92
EP  - 97
PB  - Fraunhofer-IRB-Verl.
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Arampatzis, Adamantios
A1  - Karamanidis, Kiros
A1  - Albracht, Kirsten
T1  - Adaptational responses of the human Achilles tendon by modulation of the applied cyclic strain magnitude
JF  - Journal of Experimental Biology
Y1  - 2007
U6  - http://dx.doi.org/10.1242/jeb.003814
SN  - 0022-0949
VL  - 210
IS  - 15
SP  - 2743
EP  - 2753
ER  - 
TY  - JOUR
A1  - Ketelhut, Maike
A1  - Brügge, G. M.
A1  - Göll, Fabian
A1  - Braunstein, Bjoern
A1  - Albracht, Kirsten
A1  - Abel, Dirk
T1  - Adaptive iterative learning control of an industrial robot during neuromuscular training
JF  - IFAC PapersOnLine
N2  - To prevent the reduction of muscle mass and loss of strength coming along with the human aging process, regular training with e.g. a leg press is suitable. However, the risk of training-induced injuries requires the continuous monitoring and controlling of the forces applied to the musculoskeletal system as well as the velocity along the motion trajectory and the range of motion. In this paper, an adaptive norm-optimal iterative learning control algorithm to minimize the knee joint loadings during the leg extension training with an industrial robot is proposed. The response of the algorithm is tested in simulation for patients with varus, normal and valgus alignment of the knee and compared to the results of a higher-order iterative learning control algorithm, a robust iterative learning control and a recently proposed conventional norm-optimal iterative learning control algorithm. Although significant improvements in performance are made compared to the conventional norm-optimal iterative learning control algorithm with a small learning factor, for the developed approach as well as the robust iterative learning control algorithm small steady state errors occur.
KW  - Iterative learning control
KW  - Robotic rehabilitation
KW  - Adaptive control
Y1  - 2020
U6  - http://dx.doi.org/10.1016/j.ifacol.2020.12.741
SN  - 2405-8963
VL  - 53
IS  - 2
SP  - 16468
EP  - 16475
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schuh, Günther
A1  - Höhne, Tim
A1  - Heßler, Stefan
T1  - Adaptive Logistik : Informationsmanagement in der Standplatzmontage
JF  - Karlsruher Arbeitsgespräche Produktionsforschung 2008 : Spitzentechnologien für den Wirtschaftsmotor Produktion - Ergebnisse aus dem BMBF-Rahmenkonzept "Forschung für die Produktion von morgen"; Tagungsband zur Veranstaltung am 11. und 12. März 2008 Kongresszentrum Stadthalle Karlsruhe
Y1  - 2008
N1  - Wissenschaftliche Berichte / Forschungszentrum Karlsruhe in der Helmholtz-Gemeinschaft, Projektträgerschaft Produktion und Fertigungstechnologien ; 214,
FZKA-PFT ; 214
SP  - 248
EP  - 255
ER  - 
TY  - JOUR
A1  - Schuh, G.
A1  - Kampker, A.
A1  - Höhne, Tim
T1  - Adaptive Logistik – Selbststeuerung in Fertigung und Montage
JF  - wt Werkstattstechnik online
Y1  - 2006
SN  - 1436-4980
VL  - 96
IS  - 5
SP  - 321
EP  - 324
ER  - 
TY  - JOUR
A1  - Mertens, Josef
A1  - Henke, Rolf
T1  - Adaptive technologies for future civil air transport
JF  - Air & Space Europe. 3 (2001), H. 3-4
Y1  - 2001
SN  - 1247-5793
SP  - 80
EP  - 82
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Stützle, Thorsten
A1  - Viereck, Uwe
A1  - Stribersky, Anton
T1  - Adaptiver Gleitschutz für Schienenfahrzeuge (Adaptive Wheelslide Protection System for Railway Vehicles) / Stützle, Thorsten ; Viereck, Uwe ; Enning, Manfred ; Stribersky, Anton ; Rulka, Wolfgang
JF  - at - Automatisierungstechnik . 54 (2006), H. 3
Y1  - 2006
SN  - 0178-2312
SP  - 139
EP  - 148
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Stützle, T.
A1  - Viereck, U.
T1  - Adaptiver Gleitschutz für Schienenfahrzeuge / Stützle, T. ; Viereck, U. ; Enning, M. ; Rulka, W. ; Stribersky, A. ; Abel, D.
JF  - Innovations for Europe : VDE-Kongress 2006, 23. - 25. Oktober 2006 in Aachen / Tagungsleiter: W. Schröppel
Y1  - 2006
SN  - 3-8007-2979-2
SP  - 401
EP  - 406
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Atlas, Glen
A1  - Brealey, David
A1  - Dhar, Sunil
A1  - Dikta, Gerhard
A1  - Singer, Meryvn
T1  - Additional hemodynamic measurements with an esophageal Doppler monitor: a preliminary report of compliance, force, kinetic energy, and afterload in the clinical setting
JF  - Journal of clinical monitoring and computing
N2  - The esophageal Doppler monitor (EDM) is a minimally-invasive hemodynamic device which evaluates both cardiac output (CO), and fluid status, by estimating stroke volume (SV) and calculating heart rate (HR). The measurement of these parameters is based upon a continuous and accurate approximation of distal thoracic aortic blood flow. Furthermore, the peak velocity (PV) and mean acceleration (MA), of aortic blood flow at this anatomic location, are also determined by the EDM. The purpose of this preliminary report is to examine additional clinical hemodynamic calculations of: compliance (C), kinetic energy (KE), force (F), and afterload (TSVRi). These data were derived using both velocity-based measurements, provided by the EDM, as well as other contemporaneous physiologic parameters. Data were obtained from anesthetized patients undergoing surgery or who were in a critical care unit. A graphical inspection of these measurements is presented and discussed with respect to each patient’s clinical situation. When normalized to each of their initial values, F and KE both consistently demonstrated more discriminative power than either PV or MA. The EDM offers additional applications for hemodynamic monitoring. Further research regarding the accuracy, utility, and limitations of these parameters is therefore indicated.
KW  - Acceleration
KW  - Velocity
KW  - Kinetic energy
KW  - Force
KW  - Compliance
KW  - Afterload
KW  - Contractility
KW  - Volume status
KW  - Esophageal Doppler monitor
Y1  - 2012
SN  - 1573-2614
U6  - http://dx.doi.org/10.1007/s10877-012-9386-5
IS  - 26
SP  - 473
EP  - 482
PB  - Springer Nature
CY  - London
ER  - 
TY  - JOUR
A1  - Kaul, D. K.
A1  - Koshkaryev, A.
A1  - Artmann, Gerhard
A1  - Barshtein, G.
A1  - Yedgar, S.
T1  - Additive effect of red blood cell rigidity and adherence to endothelial cells in inducing vascular resistance
JF  - American Journal of Physiology : Heart and Circulation Physiology . 295 (2008), H. 4
Y1  - 2008
SN  - 1522-1539
VL  - 295
IS  - 4
SP  - H1788
EP  - H1793
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Additive manufactured mechanical disentanglement lock
JF  - RTejournal - Forum für Rapid Technologie
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-2-42147
SN  - 1614-0923
VL  - 12
PB  - Fachhochschule Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Schmidt, Frank-Michael
A1  - Hötter, Jan-Steffen
A1  - Sokalla, Wolfgang
A1  - Sokalla, Patrick
T1  - Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry
JF  - Physics Procedia
Y1  - 2010
SN  - 1875-3892
N1  - Laser Assisted Net Shape Engineering 6, Proceedings of the LANE 2010, Part 2
VL  - 5
IS  - 2
SP  - 543
EP  - 549
ER  - 
TY  - JOUR
A1  - Temiz Artmann, Aysegül
A1  - Akhisaroglu, M.
A1  - Sercan, Z.
A1  - Kayatekin, B. M.
T1  - Adhesion of Erythrocytes to Endothelial Cells After Acute Exercise: Differences in Red Blood Cells from Juvenile and Adult Rats. Temiz Artmann, A.; Akhisaroglu, M.; Sercan, Z.; Kayatekin, BM.; Yorukoglu, K.; Kirkali, G.
JF  - Physiological  Research (2005)
Y1  - 2005
SN  - 0862-8408
N1  - pre-press article
ER  - 
TY  - JOUR
A1  - Ketelhut, Maike
A1  - Kolditz, Melanie
A1  - Göll, Fabian
A1  - Braunstein, Bjoern
A1  - Albracht, Kirsten
A1  - Abel, Dirk
T1  - Admittance control of an industrial robot during resistance training
JF  - IFAC-PapersOnLine
N2  - Neuromuscular strength training of the leg extensor muscles plays an important role in the rehabilitation and prevention of age and wealth related diseases. In this paper, we focus on the design and implementation of a Cartesian admittance control scheme for isotonic training, i.e. leg extension and flexion against a predefined weight. For preliminary testing and validation of the designed algorithm an experimental research and development platform consisting of an 
industrial robot and a force plate mounted at its end-effector has been used. Linear, diagonal and arbitrary two-dimensional motion trajectories with different weights for the leg extension and flexion part are applied. The proposed algorithm is easily adaptable to trajectories consisting of arbitrary six-dimensional poses and allows the implementation of individualized trajectories.
KW  - Assistive technology
KW  - Rehabilitation engineering
KW  - Human-Computer interaction
KW  - Automatic control
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.ifacol.2019.12.102
SN  - 2405-8963
N1  - 14th IFAC Symposium on Analysis, Design, and Evaluation of Human Machine Systems HMS 2019
Tallinn, Estonia, 16–91 September 2019
VL  - 52
IS  - 19
SP  - 223
EP  - 228
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Fredebeul-Krein, Markus
T1  - Adopting a coherent institutional framework for the Ukrainian telecom sector: Lessons to be learnt from European and German experience
JF  - Zerkalo Nedeli  (2003)
Y1  - 2003
N1  - (Ukrainian Journal)
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, A.
A1  - Schütze, A.
A1  - Wallach, D.
T1  - Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; Kämper, K.-P.; Schütze, A.; Wallach, D.; Walter, T.
JF  - Mst-News (2006)
Y1  - 2006
SN  - 0948-3128
SP  - 15, 16
EP  - u. 35
ER  - 
TY  - JOUR
A1  - Selmer, Thorsten
A1  - Brüser, Thomas
A1  - Dahl, Christiane
T1  - ADP Sulfurylase" from Thiobacillus denitrificans Is an Adenylylsulfate:Phosphate Adenylyltransferase and Belongs to a New Family of Nucleotidyltransferases / Brüser, Thomas ; Selmer, Thorsten ; Dahl, Christiane
JF  - Journal of Biological Chemistry. 275 (2000), H. 3
Y1  - 2000
SN  - 1083-351X
SP  - 1691
EP  - 1690
ER  - 
TY  - JOUR
A1  - Lauth, Jakob
A1  - Christmann, K.
A1  - Schwarz, E.
T1  - Adsorption geometry of H on RU(1010) image as determined by LEED and HREELS / Christmann, K. ; Lauth, G. ; Schwarz, E.
JF  - Vacuum. 41 (1990), H. 1-3
Y1  - 1990
SN  - 0042-207X
SP  - 293
EP  - 296
ER  - 
TY  - JOUR
A1  - Akimbekov, N.Sh.
A1  - Digel, Ilya
A1  - O’Heras, C.
A1  - Tastambek, K.T.
A1  - Savitskaya, I.S.
A1  - Ualyeva, P.S.
A1  - Mansurov, Z.A.
A1  - Zhubanova, A.A.
T1  - Adsorption of bacterial lipopol ysaccharides on carbonized ri ce husks obtained in the batch  experiments
JF  - KazNU Bulletin. Biology series
Y1  - 2015
SN  - 1563-0218
VL  - 60
IS  - No 1/2
SP  - 144
EP  - 148
ER  - 
TY  - JOUR
A1  - Zhubanova, Azhar A.
A1  - Aknazarov, S. K.
A1  - Mansurov, Zulkhair
A1  - Digel, Ilya
A1  - Kozhalakova, A. A.
A1  - Akimbekov, Nuraly Shardarbekovich
A1  - O'Heras, Carlos
A1  - Tazhibayeva, S.
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Adsorption of bacterial Lipopolysaccharides and blood plasma proteins on modified carbonized materials
N2  - Bacterial lipopolysaccharides (endotoxins) show strong biological effects at very low concentrations in human beings and many animals when entering the blood stream. These include affecting structure and function of organs and cells, changing metabolic functions, raising body temperature, triggering the coagulation cascade, modifying hemodynamics and causing septic shock. Because of this toxicity, the removal of even minute amounts is essential for safe parenteral administration of drugs and also for septic shock patients' care. The absence of a general method for endotoxin removal from liquid interfaces urgently requires finding new methods and materials to overcome this gap. Nanostructured carbonized plant parts is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study was comparative measurement of endotoxin- and blood proteins-related adsorption rate and adsorption capacity for different carboneous materials produced at different temperatures and under different surface modifications. As a main surface modificator, positively cbarged polymer, polyethileneimine (PEl) was used. Activated carbon materials showed good adsorption properties for LPS and some proteins used in the experiments. During the batch experiments, several techniques (dust removal, autoclaving) were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics. Modification of the surface apparently has not affected hemoglobin binding to the adsorbent's surface. Obtained adsorption isotherms can be used as a powerful tool for designing of future column-based setups for blood purification from LPS, which is especially important for septic shock treatment.
KW  - Kohlenstofffaser
KW  - Lipopolysaccharide
KW  - nanostrukturierte carbonisierte Pflanzenteile
KW  - lipopolysaccharides
KW  - nanostructured carbonized plant parts
Y1  - 2010
ER  - 
TY  - JOUR
A1  - Akimbekov, N.Sh.
A1  - Digel, Ilya
A1  - O´Heras, C.
A1  - Tastambek, K.T.
A1  - Savitskaya, I.S.
A1  - Ualyeva, P.S.
A1  - Mansurov, Z.A.
A1  - Zhubanova, A.A.
T1  - Adsorption of bacterial lipopolysaccharides on carbonized rice husks obtained in the batch experiments
JF  - Experimental Biology
N2  - The  scope  of  this  study  is  the  measurement  of  endotoxin  adsorption  rate  for  carbonized  rice  husk.  It  showed  good  adsorption properties for LPS. During the batch experiments, several techniques were used and optimized for improving the  material’s  adsorption  behavior.  Also,  with  the  results  obtained  it  was  possible  to  differentiate  the  materials  according to their adsorption capacity and kinetic characteristics.
KW  - surface modification
KW  - adsorption
KW  - carbonized rice husk
KW  - lipopolysaccharide
Y1  - 2014
SN  - 1563-0218
N1  - Original in russischer Sprache
VL  - 60
IS  - 1/2
SP  - 144
EP  - 148
PB  - Al-Farabi Kazakh National University
CY  - Almaty
ER  - 
TY  - JOUR
A1  - Kozhalakova, A. A.
A1  - Zhubanova, Azhar A.
A1  - Mansurov, Z. A.
A1  - Digel, Ilya
A1  - Tazhibayeva, S. M.
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Adsorption of bacterial lipopolysaccharides on carbonized rice shell
JF  - Science of Central Asia (2010)
Y1  - 2010
SP  - 50
EP  - 54
ER  - 
TY  - JOUR
A1  - Wiesen, Sebastian
A1  - Tippkötter, Nils
A1  - Muffler, Kai
A1  - Suck, Kirstin
A1  - Sohling, Ulrich
A1  - Ruf, Friedrich
A1  - Ulber, Roland
T1  - Adsorption of fatty acids to layered double hydroxides in aqueous systems
JF  - Adsorption
N2  - Due to their anion exchange characteristics, layered double hydroxides (LDHs) are suitable for the detoxification of aqueous, fatty acid containing fermentation substrates. The aim of this study is to examine the adsorption mechanism, using crude glycerol from plant oil esterification as a model system. Changes in the intercalation structure in relation to the amount of fatty acids adsorbed are monitored by X-ray diffraction and infra-red spectroscopy. Additionally, calcination of LDH is investigated in order to increase the binding capacity for fatty acids. Our data propose that, at ambient temperature, fatty acids can be bound to the hydrotalcite by adsorption or in addition by intercalation, depending on fatty acid concentration. The adsorption of fatty acids from crude glycerol shows a BET-like behavior. Above a fatty acid concentration of 3.5 g L−1, intercalation of fatty acids can be shown by the appearance of an increased interlayer spacing. This observation suggests a two phase adsorption process. Calcination of LDHs allows increasing the binding capacity for fatty acids by more than six times, mainly by reduction of structural CO32−.
Y1  - 2015
VL  - 21
IS  - 6-7
SP  - 459
EP  - 466
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Wiesen, Sebastian
A1  - Tippkötter, Nils
A1  - Muffler, Kai
A1  - Suck, Kirstin
A1  - Sohling, Ulrich
A1  - Ruf, Nils
A1  - Ulber, Roland
T1  - Adsorptive Vorbehandlung von Rohglycerin für die 1,3-Propandiol Fermentation mit Clostridium diolis
JF  - Chemie Ingenieur Technik
N2  - Bei der Gewinnung von Fettsäuren aus Pflanzenölen, z. B. zur Herstellung von Biopolymeren, oder bei der Biodiesel- und Seifenproduktion, fällt Glycerin als Nebenprodukt an. Bei der Biokonversion dieses Rohstoffes zu 1,3-Propandiol wird der Produktionsorganismus Clostridium diolis durch Verunreinigungen im Rohglycerin gehemmt. Als inhibierende Substanzen konnten freie Fettsäuren identifiziert werden. Mithilfe eines adsorptiven Aufarbeitungsverfahrens ist es gelungen, die Fettsäuren zu entfernen und die Konversionseffizienz zu 1,3-Propandiol zu erhöhen.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/cite.201300080
N1  - Englischer Titel: Adsorptive Pretreatment of Crude Glycerol Prior to Fermentation to 1,3-Propanediole by Clostridium Diolis
VL  - 86
IS  - 1-2
SP  - 129
EP  - 135
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Schulze, Sven
A1  - Feyerl, Günter
A1  - Pischinger, Stefan
T1  - Advanced ECMS for hybrid electric heavy-duty trucks with predictive battery discharge and adaptive operating strategy under real driving conditions
JF  - Energies
N2  - To fulfil the CO2 emission reduction targets of the European Union (EU), heavy-duty (HD) trucks need to operate 15% more efficiently by 2025 and 30% by 2030. Their electrification is necessary as conventional HD trucks are already optimized for the long-haul application. The resulting hybrid electric vehicle (HEV) truck gains most of the fuel saving potential by the recuperation of potential energy and its consecutive utilization. The key to utilizing the full potential of HEV-HD trucks is to maximize the amount of recuperated energy and ensure its intelligent usage while keeping the operating point of the internal combustion engine as efficient as possible. To achieve this goal, an intelligent energy management strategy (EMS) based on ECMS is developed for a parallel HEV-HD truck which uses predictive discharge of the battery and adaptive operating strategy regarding the height profile and the vehicle mass. The presented EMS can reproduce the global optimal operating strategy over long phases and lead to a fuel saving potential of up to 2% compared with a heuristic strategy. Furthermore, the fuel saving potential is correlated with the investigated boundary conditions to deepen the understanding of the impact of intelligent EMS for HEV-HD trucks.
KW  - Energy management strategies
KW  - ECMS
KW  - CO2 emission reduction targets
KW  - Driving cycle recognition
KW  - Predictive battery discharge
Y1  - 2023
U6  - http://dx.doi.org/10.3390/en16135171
SN  - 1996-1073
N1  - The article belongs to the Special Issue "Energy Management Strategies of Electrified Vehicles toward the Real-World Driving".
VL  - 16
IS  - 13
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Abbas, Karim
A1  - Hedwig, Lukas
A1  - Balc, Nicolae
A1  - Bremen, Sebastian
T1  - Advanced FFF of PEEK: Infill strategies and material characteristics for rapid tooling
JF  - Polymers
N2  - Traditional vulcanization mold manufacturing is complex, costly, and under pressure due to shorter product lifecycles and diverse variations. Additive manufacturing using Fused Filament Fabrication and high-performance polymers like PEEK offer a promising future in this industry. This study assesses the compressive strength of various infill structures (honeycomb, grid, triangle, cubic, and gyroid) when considering two distinct build directions (Z, XY) to enhance PEEK’s economic and resource efficiency in rapid tooling. A comparison with PETG samples shows the behavior of the infill strategies. Additionally, a proof of concept illustrates the application of a PEEK mold in vulcanization. A peak compressive strength of 135.6 MPa was attained in specimens that were 100% solid and subjected to thermal post-treatment. This corresponds to a 20% strength improvement in the Z direction. In terms of time and mechanical properties, the anisotropic grid and isotropic cubic infill have emerged for use in rapid tooling. Furthermore, the study highlights that reducing the layer thickness from 0.15 mm to 0.1 mm can result in a 15% strength increase. The study unveils the successful utilization of a room-temperature FFF-printed PEEK mold in vulcanization injection molding. The parameters and infill strategies identified in this research enable the resource-efficient FFF printing of PEEK without compromising its strength properties. Using PEEK in rapid tooling allows a cost reduction of up to 70% in tool production.
KW  - polyetheretherketone (PEEK)
KW  - rapid tooling
KW  - infill strategy
KW  - compression behavior
KW  - additive manufacturing
KW  - fused filament fabrication
Y1  - 2023
U6  - http://dx.doi.org/10.3390/polym15214293
N1  - This article belongs to the Special Issue "Polymer Materials and Design Processes for Additively Manufactured Products"
VL  - 2023
IS  - 15
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
A1  - Rumiantsev, A.
A1  - Schott, S.
T1  - Advanced on-wafer multiport calibration methods for mono- and mixed-mode device characterization
JF  - On wafer characterization : 63rd ARFTG conference digest, spring 2004, 11 June 2004, Fort Worth, TX / Automatic RF Techniques Group. [Conference chair: John Cable. Publication chair: J. G. Burns]
Y1  - 2004
SN  - 0-7803-8371-0
N1  - Microwave Theory and Techniques Society. ; Automatic RF Techniques Group ; ARFTG conference ; (63 : ; 2004.06.11 : ; Fort Worth, Tex.)
SP  - 91
EP  - 96
PB  - IEEE Operations Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Kaulen, Lars
A1  - Schwabedal, Justus T. C.
A1  - Schneider, Jules
A1  - Ritter, Philipp
A1  - Bialonski, Stephan
T1  - Advanced sleep spindle identification with neural networks
JF  - Scientific Reports
N2  - Sleep spindles are neurophysiological phenomena that appear to be linked to memory formation and other functions of the central nervous system, and that can be observed in electroencephalographic recordings (EEG) during sleep. Manually identified spindle annotations in EEG recordings suffer from substantial intra- and inter-rater variability, even if raters have been highly trained, which reduces the reliability of spindle measures as a research and diagnostic tool. The Massive Online Data Annotation (MODA) project has recently addressed this problem by forming a consensus from multiple such rating experts, thus providing a corpus of spindle annotations of enhanced quality. Based on this dataset, we present a U-Net-type deep neural network model to automatically detect sleep spindles. Our model’s performance exceeds that of the state-of-the-art detector and of most experts in the MODA dataset. We observed improved detection accuracy in subjects of all ages, including older individuals whose spindles are particularly challenging to detect reliably. Our results underline the potential of automated methods to do repetitive cumbersome tasks with super-human performance.
Y1  - 2022
U6  - http://dx.doi.org/10.1038/s41598-022-11210-y
SN  - 2045-2322
N1  - Corresponding author: Stephan Bialonski
VL  - 12
IS  - Article number: 7686
SP  - 1
EP  - 10
PB  - Springer Nature
CY  - London
ER  - 
TY  - JOUR
A1  - Müller-Veggian, Mattea
A1  - Colautti, P.
A1  - Conte, V.
A1  - De Nardo, L.
T1  - Advanced TEPC (Tissue-equivalent proportional counters) for radiation monitoring
JF  - Annual report / Istituto Nazionale di Fisica Nucleare, LNL, Laboratori Nazionali di Legnaro. 1998 (1999)
Y1  - 1999
SP  - 106
ER  - 
TY  - JOUR
A1  - Schwager, Christian
A1  - Flesch, Robert
A1  - Schwarzbözl, Peter
A1  - Herrmann, Ulf
A1  - Teixeira Boura, Cristiano José
T1  - Advanced two phase flow model for transient molten salt receiver system simulation
JF  - Solar Energy
N2  - In order to realistically predict and optimize the actual performance of a concentrating solar power (CSP) plant sophisticated simulation models and methods are required. This paper presents a detailed dynamic simulation model for a Molten Salt Solar Tower (MST) system, which is capable of simulating transient operation including detailed startup and shutdown procedures including drainage and refill. For appropriate representation of the transient behavior of the receiver as well as replication of local bulk and surface temperatures a discretized receiver model based on a novel homogeneous two-phase (2P) flow modelling approach is implemented in Modelica Dymola®. This allows for reasonable representation of the very different hydraulic and thermal properties of molten salt versus air as well as the transition between both. This dynamic 2P receiver model is embedded in a comprehensive one-dimensional model of a commercial scale MST system and coupled with a transient receiver flux density distribution from raytracing based heliostat field simulation. This enables for detailed process prediction with reasonable computational effort, while providing data such as local salt film and wall temperatures, realistic control behavior as well as net performance of the overall system. Besides a model description, this paper presents some results of a validation as well as the simulation of a complete startup procedure. Finally, a study on numerical simulation performance and grid dependencies is presented and discussed.
KW  - Molten salt solar tower
KW  - Molten salt receiver system
KW  - Dynamic simulation
KW  - Two-phase modelling
KW  - Transient flux distribution
Y1  - 2022
U6  - http://dx.doi.org/10.1016/j.solener.2021.12.065
SN  - 0038-092X (print)
SN  - 1471-1257 (online)
VL  - 232
SP  - 362
EP  - 375
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Göttsche, Joachim
A1  - Reilly, S.
A1  - Wittwer, Volker
T1  - Advanced window systems and building energy performance / S. Reilly ; J. Göttsche ; V. Wittwer
JF  - Solar World Congress, 1991 : proceedings of the biennial congress of the International Solar Energy Society, Denver, Colorado, USA, 19-23 August 1991 / ed. by M. E. Arden ...
Y1  - 1991
SN  - 0-08-041690-X
SP  - 3211
EP  - 3216
PB  - Pergamon Press
CY  - Oxford [u.a.]
ER  -