TY  - CHAP
A1  - Altay, Okyay
A1  - Taddei, Francesca
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Vibration mitigation of wind turbine towers with tuned mass dampers
T2  - Wind turbine control and monitoring. (Advances in industrial control)
N2  - Because of its minor environmental impact, electricity generation using wind power is getting remarkable. The further growth of the wind industry depends on technological solutions to the challenges in production and construction of the turbines. Wind turbine tower vibrations, which limit power generation efficiency and cause fatigue problems with high maintenance costs, count as one of the main structural difficulties in the wind energy sector. To mitigate tower vibrations auxiliary measures are necessary. The effectiveness of tuned mass damper is verified by means of a numeric study on a 5 MW onshore reference wind turbine. Hereby, also seismic-induced vibrations and soil–structure interaction are considered. Acquired results show that tuned mass damper can effectively reduce resonant tower vibrations and improve the fatigue life of wind turbines. This chapter is also concerned with tuned liquid column damper and a semiactive application of it. Due to its geometric versatility and low prime costs, tuned liquid column dampers are a good alternative to other damping measures, in particular for slender structures like wind turbines.
Y1  - 2014
SN  - 978-3-319-08412-1 (Print) ; 978-3-319-08413-8 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-319-08413-8_12
SP  - 337
EP  - 373
PB  - Springer
CY  - Cham ; Heidelberg ; New York ; Dordrecht ; London
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Hinzen, Klaus-G.
A1  - Höffer, Rüdiger
T1  - Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.
KW  - Wind turbulence
KW  - Gust wind response
KW  - Spectral analysis
Y1  - 2019
SN  - 978-3-662-57550-5 (Online)
SN  - 978-3-662-57548-2 (Print)
U6  - http://dx.doi.org/10.1007/978-3-662-57550-5_3
SP  - 153
EP  - 196
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kuhlmann, Wolfram
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
A1  - Kempen, Thomas
T1  - Simulation des Tragverhaltens des Aachener Doms im Erdbebenfall
T2  - Die karolingische Pfalzkapelle in Aachen : Material, Bautechnik, Restaurierung. (Arbeitshefte der rheinischen Denkmalpflege ; 78)
Y1  - 2012
SN  - 978-3-88462-325-1
SP  - 237
EP  - 248
PB  - Wernersche Verlags-Gesellschaft
CY  - Worms
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
A1  - Park, Jin
T1  - Seismische Auslegung von Silo- und Tankbauwerken
T2  - Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem konstruktiven Ingenieurbau ; 2010,6)
Y1  - 2010
SP  - 215
EP  - 224
PB  - Univ. der Bundeswehr
CY  - Neubiberg
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Holtschoppen, Britta
T1  - Seismic design of structures and components in industrial units
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - Industrial units consist of the primary load-carrying structure and various process engineering components, the latter being by far the most important in financial terms. In addition, supply structures such as free-standing tanks and silos are usually required for each plant to ensure the supply of material and product storage. Thus, for the earthquake-proof design of industrial plants, design and construction rules are required for the primary structures, the secondary structures and the supply structures. Within the framework of these rules, possible interactions of primary and secondary structures must also be taken into account. Importance factors are used in seismic design in order to take into account the usually higher risk potential of an industrial unit compared to conventional building structures. Industrial facilities must be able to withstand seismic actions because of possibly wide-ranging damage consequences in addition to losses due to production standstill and the destruction of valuable equipment. The chapter presents an integrated concept for the seismic design of industrial units based on current seismic standards and the latest research results. Special attention is devoted to the seismic design of steel thin-walled silos and tank structures.
KW  - Industrial units
KW  - Seismic design
KW  - Tanks
KW  - Silos
KW  - Components
Y1  - 2019
SN  - 978-3-662-57550-5
U6  - http://dx.doi.org/10.1007/978-3-662-57550-5_5
SP  - 359
EP  - 481
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Gkatzogias, Konstantinos
A1  - Veljkoviv, Ana
A1  - Pohoryles, Daniel A.
A1  - Tsionis, Georgios
A1  - Bournas, Dionysios A.
A1  - Crowley, Helen
A1  - Norlén, Hedvig
A1  - Butenweg, Christoph
A1  - Gervasio, Helena
A1  - Manfredi, Vincenzo
A1  - Masi, Angelo
A1  - Zaharieva, Roumiana
ED  - Gkatzogias, Konstantinos
ED  - Tsionis, Georgios
T1  - Policy practice and regional impact assessment for building renovation
T2  - REEBUILD Integrated Techniques for the Seismic Strengthening & Energy Efficiency of Existing Buildings
N2  - The work presented in this report provides scientific support to building renovation policies in the EU by promoting a holistic point of view on the topic. Integrated renovation can be seen as a nexus between European policies on disaster resilience, energy efficiency and circularity in the building sector. An overview of policy measures for the seismic and energy upgrading of buildings across EU Member States identified only a few available measures for combined upgrading. Regulatory framework, financial instruments and digital tools similar to those for energy renovation, together with awareness and training may promote integrated renovation. A framework for regional prioritisation of building renovation was put forward, considering seismic risk, energy efficiency, and socioeconomic vulnerability independently and in an integrated way. Results indicate that prioritisation of building renovation is a multidimensional problem. Depending on priorities, different integrated indicators should be used to inform policies and accomplish the highest relative or most spread impact across different sectors. The framework was further extended to assess the impact of renovation scenarios across the EU with a focus on priority regions. Integrated renovation can provide a risk-proofed, sustainable, and inclusive built environment, presenting an economic benefit in the order of magnitude of the highest benefit among the separate interventions. Furthermore, it presents the unique capability of reducing fatalities and energy consumption at the same time and, depending on the scenario, to a greater extent.
Y1  - 2022
SN  - 978-92-76-60454-9
U6  - http://dx.doi.org/10.2760/883122
SN  - 1831-9424
SP  - 1
EP  - 68
PB  - Publications Office of the European Union
CY  - Luxembourg
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
T1  - Passt, wackelt und hat Luft: Mauerwerksbauten aus Leichtbeton in Erdbebengebieten
T2  - Beton-Bauteile, 65. Ausgabe (2017): Entwerfen - Planen - Ausführen
Y1  - 2017
SN  - 978-3-7625-3676-5
N1  - gedruckt in der Bereichsbibliothek Bayernallee unter der Signatur 11 XCF 81-2017 vorhanden
SP  - 136
EP  - 140
PB  - Bauverl.
CY  - Gütersloh
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Kalker, Ines
A1  - Mistler, Michael
T1  - Numerical simulation of historic masonry buildings
T2  - Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in archäologischer, historischer und seismologischer Sicht ; Beiträge des Interdisziplinären Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)
Y1  - 2007
SN  - 978-3-515-09030-8 ; 3-515-09030-4
SP  - 171
EP  - 189
PB  - Franz Steiner Verlag
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Gellert, Christoph
A1  - Butenweg, Christoph
T1  - Neuer Ansatz für die Bemessung von Mauerwerksbauten
T2  - Innovationen im konstruktiven Ingenieurbau : Methoden - Materialien - Bauwerke ; Festschrift Professor Hirschfeld / hrsg. von Karl Beucke
Y1  - 2010
SP  - 217
EP  - 224
PB  - Bauhaus-Univ. Weimar
CY  - Weimar
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Bollenbeck, S.
T1  - Mauerwerksbauten unter Erdbebenbelastung
T2  - Bauwerke und Erdbeben
Y1  - 2003
SN  - 3-528-02574-3
SP  - 385
EP  - 397
PB  - Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Bollenbeck, S.
T1  - Mauerwerksbauten
T2  - Bauwerke und Erdbeben / Konstantin Meskouris ; Klaus-G. Hinzen
Y1  - 2003
SN  - 3-528-02574-3 (Print) ; 978-3-322-96831-9 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-322-96831-9_7
SP  - 385
EP  - 397
PB  - Vieweg + Teubner
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
T1  - Erdbebensichere Auslegung von Bauwerken nach DIN 4149:2005
T2  - Betonkalender 2008: Konstruktiver Wasserbau, erdbebensicheres Bauen. Band 2
Y1  - 2008
SN  - 978-3-433-01839-2 (Print) ; 978-3-433-01854-5 (E-Book)
U6  - http://dx.doi.org/10.1002/9783433600702.ch5
SP  - 1
EP  - 54
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Norda, H.
T1  - Erdbebenberechnung von Mauerwerksbauten nach DIN EN 1998-1:2010-12
T2  - Mauerwerksbau-Praxis nach Eurocode / Schubert, Schneider, Schoch (Hrsg.). - 3., vollständig überarbeitete Auflage
Y1  - 2014
SN  - 978-3-410-22739-7
SP  - 367
EP  - 412
PB  - Beuth
CY  - Berlin, Wien, Zürich
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - Erdbebenberechnung von Mauerwerksbauten nach DIN EN 1998-1 (12.2010)
T2  - Mauerwerksbau-Praxis / Schubert; Schneider; Schoch (Hrsg.)
Y1  - 2009
SN  - 978-3-89932-217-0
SP  - 299
EP  - 343
PB  - Bauwerk
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Roeser, W.
T1  - Erdbebenbemessung von Stahlbetontragwerken nach DIN EN 1998-1
T2  - Stahlbetonbau aktuell : Praxishandbuch
Y1  - 2012
SN  - 978-3-410-21932-3 (Print) ; 978-341-02193-3-0 (E-Book)
SP  - A.1
EP  - A.43
PB  - Beuth
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Meyer, Udo
T1  - Erdbebenbemessung bei Mauerwerksbauten
T2  - Mauerwerk-Kalender 2010: Normen für Bemessung und Ausführung
Y1  - 2010
SN  - 3-433-60040-6 ; 978-3-433-60040-5
U6  - http://dx.doi.org/10.1002/9783433600405.ch7
SP  - 141
EP  - 167
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Meyer, Udo
T1  - Erdbebenbemessung bei Mauerwerksbauten
T2  - Mauerwerk Kalender 2021: Kunststoffverankerungen Digitalisierung im Mauerwerksbau
N2  - Der vorliegende Beitrag stellt den seismischen Nachweis von Mauerwerksbauten in Deutschland auf Grundlage der DIN EN 1998‐1/NA vor, wobei auch die wesentlichen Änderungen zu der Norm DIN 4149 vergleichend erläutert werden. Vorgestellt werden die Definition der Erdbebeneinwirkung, das seismische Verhalten von Mauerwerksbauten und die Erläuterung der Rechenverfahren. Darauf aufbauend wird die Anwendung an drei Praxisbeispielen demonstriert.
Y1  - 2021
SN  - 9783433032930
SN  - 9783433610732
U6  - http://dx.doi.org/10.1002/9783433610732.ch12
SP  - 329
EP  - 355
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Weber, Felix
A1  - Bomholt, Frederik
A1  - Butenweg, Christoph
ED  - Bergmeister, Konrad
ED  - Fingerloos, Frank
ED  - Wörner, Johann-Dietrich
T1  - Erdbeben- und Schwingungsschutz von Bauwerken
T2  - 2023 BetonKalender: Wasserundurchlässiger Beton, Brückenbau
N2  - Dieser Beitrag beschreibt die herkömmlichen Maßnahmen wie die Kapazitätsbemessung der Tragwerksstruktur, die Isolation des Bauwerks mittels Basisisolatoren, die Dämpfungserhöhung der Struktur mittels Inter-Story-Dämpfern und die Schwingungsreduktion mittels Schwingungstilgern gegen Einwirkungen durch Erdbeben, Wind, Verkehr und Personen auf die Bauwerke. Ergänzend wird die erdbebengerechte Auslegung und Isolation von nichttragenden Bauteilen behandelt. Für die betrachteten Systeme werden die Bewegungsdifferenzialgleichungen unter Berücksichtigung der wesentlichen Nichtlinearitäten angegeben. Die vorgestellten Weiterentwicklungen in den Bereichen der Basisisolatoren, Dämpfern und Schwingungstilgern zeigen, dass das modellbasierte Design mittels Simulation ein sehr effektives, ökonomisches und dank der heutigen Computerleistung auch zeiteffizientes Werkzeug darstellt.
Y1  - 2022
SN  - 9783433611180
SN  - 9783433033753
U6  - http://dx.doi.org/10.1002/9783433611180.ch16
N1  - Beton-Kalender, 112. Jahrgang (2023): Wasserundurchlässiger Beton, Brückenbau ausleihbar unter der Sig. 11 XCF 3-2023,2
SP  - 779
EP  - 859
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Ebenau, C.
T1  - Entwicklung eines objekt-orientierten FE-Programms
T2  - Forum Bauinformatik - Junge Wissenschaftler forschen, Cottbus '96
Y1  - 1996
SN  - 978-3-18-313504-2
N1  - Fortschritt-Berichte VDI : Reihe 4, Bauingenieurwesen, Band 135
SP  - 60
EP  - 65
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
T1  - Earthquake resistant design of structures according to Eurocode 8
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - The chapter initially provides a summary of the contents of Eurocode 8, its aim being to offer both to the students and to practising engineers an easy introduction into the calculation and dimensioning procedures of this earthquake code. Specifically, the general rules for earthquake-resistant structures, the definition of design response spectra taking behaviour and importance factors into account, the application of linear and non-linear calculation methods and the structural safety verifications at the serviceability and ultimate limit state are presented. The application of linear and non-linear calculation methods and corresponding seismic design rules is demonstrated on practical examples for reinforced concrete, steel and masonry buildings. Furthermore, the seismic assessment of existing buildings is discussed and illustrated on the example of a typical historical masonry building in Italy. The examples are worked out in detail and each step of the design process, from the preliminary analysis to the final design, is explained in detail.
KW  - Seismic design
KW  - Eurocode 8
KW  - Design examples
KW  - Response spectrum
KW  - Pushover analysis
Y1  - 2019
SN  - 978-3-662-57550-5 (Online)
SN  - 978-3-662-57548-2 (Print)
U6  - http://dx.doi.org/10.1007/978-3-662-57550-5_4
SP  - 197
EP  - 358
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Dynamisches Verhalten von Stahlbetonplatten unter Impact-Belastungen
T2  - Massivbau im Wandel : Festschrift zum 60. Geburtstag von Josef Hegger
Y1  - 2014
SN  - 3-939051-20-9
SP  - 369
EP  - 380
PB  - Ernst
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - Berechnung und Bemessung von durch Erdbeben beanspruchten Mauerwerksbauten nach DIN 4149 (04.2005)
T2  - Mauerwerksbau-Praxis / Schubert ; Schneider ; Schoch (Hrsg.)
Y1  - 2007
SN  - 3-9343-6938-3 ; 978-3-9343-6938-2
SP  - 363
EP  - 393
PB  - Werner Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kuhlmann, W.
A1  - Bettzieche, V.
A1  - Roesler, F.
A1  - Butenweg, Christoph
A1  - Könke, C.
A1  - Meskouris, Konstantin
T1  - Baudynamische Untersuchung von Talsperren des Ruhrverbandes
T2  - Neubewertung der Erdbebensicherheit von Talsperren in Deutschland : DGEB-Workshop, 28. November 2003 in Potsdam = Assessment of the seismic safety of dams in Germany / organisiert von der Deutschen Gesellschaft für Erdbebeningenieurwesen und Baudynamik. K. Meskouris ... (Hrsg.) (DGEB-Publikation ; Nr. 12)
Y1  - 2005
SN  - 3-930108-08-9
SP  - 37
EP  - 48
PB  - DGEB
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, G.
ED  - Papadrakakis, M.
ED  - Topping, B.H.V.
T1  - Automatic design of reinforced concrete structures with parallel computing
T2  - Innovative computational methods for structural mechanics
N2  - A concept for the analysis and optimal design of reinforced concrete structures is described. It is based on a nonlinear optimization algorithm and a finite element program for linear and nonlinear analysis of structures. With the aim of minimal cost design a two stage optimization using efficient gradient algorithm is developed. The optimization problems on global (structural) and local (crosssectional) level are formulated. A parallelization concept for solving the two stage optimization problem in minimal time is presented. Examples are included to illustrate the practical use and the effectively of the parallelization in the area of engineering design.
Y1  - 1999
SN  - 1-874672-05-9
U6  - http://dx.doi.org/10.4203/csets.1.14
SP  - 305
EP  - 318
PB  - Saxe-Coburg Publication
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Roeser, W.
T1  - Auslegung von Bauwerken gegen Erdbeben - Rechenbeispiele
T2  - Stahlbetonbau aktuell 2016 : Praxishandbuch / herausgegeben von: Prof. Dr.-Ing. Josef Hegger, Prof. Dr.-Ing. habil. Peter Mark
Y1  - 2016
SN  - 978-3-410-25202-3 (Print) ; 978-3-410-25203-0 (E-Book)
PB  - Beuth Verlag GmbH
CY  - Berlin ; Wien ; Zürich
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kubalski, Thomas
A1  - Marinkovic, Marko
A1  - Pfetzing, Thomas
A1  - Ismail, Mohammed
A1  - Fehling, Ekkehard
T1  - Ausfachungen aus Ziegelmauerwerk
T2  - Mauerwerk-Kalender 2016: Baustoffe, Sanierung, Eurocode-Praxis
Y1  - 2016
SN  - 978-3-433-03131-5
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Aktuelle Nachweiskonzepte von Mauerwerk unter Erdbebenbeanspruchung
T2  - Wie wollen wir in Zukunft bauen? : Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. Wolfram Jäger, Dresden, 19.04.2011. (Bauforschung und Baupraxis ; H. 10)
Y1  - 2011
SN  - 978-3-86780-216-1
SP  - 233
EP  - 238
PB  - Techn. Univ., Lehrstuhl Tragwerksplanung
CY  - Dresden
ER  -