TY  - JOUR
A1  - Muschallik, Lukas
A1  - Molinnus, Denise
A1  - Bongaerts, Johannes
A1  - Pohl, Martina
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Siegert, Petra
A1  - Selmer, Thorsten
T1  - (R,R)-Butane-2,3-diol Dehydrogenase from Bacillus clausii DSM 8716T: Cloning and Expression of the bdhA-Gene, and Initial Characterization of Enzyme
JF  - Journal of Biotechnology
N2  - The gene encoding a putative (R,R)-butane-2,3-diol dehydrogenase (bdhA) from Bacillus clausii DSM 8716T was isolated, sequenced and expressed in Escherichia coli. The amino acid sequence of the encoded protein is only distantly related to previously studied enzymes (identity 33–43%) and exhibited some uncharted peculiarities. An N-terminally StrepII-tagged enzyme variant was purified and initially characterized. The isolated enzyme catalyzed the (R)-specific oxidation of (R,R)- and meso-butane-2,3-diol to (R)- and (S)-acetoin with specific activities of 12 U/mg and 23 U/mg, respectively. Likewise, racemic acetoin was reduced with a specific activity of up to 115 U/mg yielding a mixture of (R,R)- and meso-butane-2,3-diol, while the enzyme reduced butane-2,3-dione (Vmax 74 U/mg) solely to (R,R)-butane-2,3-diol via (R)-acetoin. For these reactions only activity with the co-substrates NADH/NAD+ was observed. The enzyme accepted a selection of vicinal diketones, α-hydroxy ketones and vicinal diols as alternative substrates. Although the physiological function of the enzyme in B. clausii remains elusive, the data presented herein clearly demonstrates that the encoded enzyme is a genuine (R,R)-butane-2,3-diol dehydrogenase with potential for applications in biocatalysis and sensor development.
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.jbiotec.2017.07.020
SN  - 0168-1656
VL  - 258
SP  - 41
EP  - 50
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wilke, Thomas
T1  - [Rezension zu:] Deutsch, Kristina: Jean Marot. Un graveur d'architecture à l'époque de Louis XIV. (= Ars et Scientia; 12), Berlin; Boston 2015.
JF  - ArtHist.net
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - A comparison of complex chemistry mechanisms for hydrogen methane blends based on the Sandia / Sydney Bluff-Body Flame HM1
T2  - Proceedings of the Eleventh Asia‐Pacific Conference on Combustion (ASPACC 2017), New South Wales, Australia, 10-14 December 2017
Y1  - 2017
SN  - 978-1-5108-5646-2
SP  - 262
EP  - 265
ER  - 
TY  - CHAP
A1  - Walenta, Robert
A1  - Schellekens, Twan
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - A decentralised system approach for controlling AGVs with ROS
T2  - AFRICON, Proceedings
Y1  - 2017
SN  - 978-1-5386-2775-4
U6  - http://dx.doi.org/10.1109/AFRCON.2017.8095693
SN  - 2153-0033
N1  - AFRICON <2017, 18-20 Sept., Cape Town, South Africa>
SP  - 1436
EP  - 1441
PB  - IEEE
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Hayashi, Kosuke
A1  - Sakamoto, Azuma
A1  - Werner, Frederik
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - A high-Q resonance-mode measurement of EIS capacitive sensor by elimination of series resistance
JF  - Sensor and Actuators B: Chemical
N2  - An EIS capacitive sensor is a semiconductor-based potentiometric sensor, which is sensitive to the ion concentration or pH value of the solution in contact with the sensing surface. To detect a small change in the ion concentration or pH, a small capacitance change must be detected. Recently, a resonance-mode measurement was proposed, in which an inductor was connected to the EIS capacitive sensor and the resonant frequency was correlated with the pH value. In this study, the Q factor of the resonant circuit was enhanced by canceling the internal resistance of the reference electrode and the internal resistance of the inductor coil with the help of a bypass capacitor and a negative impedance converter, respectively. 1% variation of the signal in the developed system corresponded to a pH change of 3.93 mpH, which was about 1/12 of the conventional method, suggesting a better performance in detection of a small pH change.
KW  - Negative impedance convertor
KW  - Resonance-mode measurement
KW  - Chemical sensor
KW  - EIS capacitive sensor
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.snb.2017.03.002
SN  - 0925-4005
VL  - 248
SP  - 1006
EP  - 1010
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Dörig, Bastian
A1  - Ederer, Thorsten
A1  - Pelz, Peter Franz
A1  - Pfetsch, Marc
A1  - Wolf, Jan
T1  - A mixed-integer nonlinear program for the design of gearboxes
T2  - Operations Research Proceedings 2016
N2  - Gearboxes are mechanical transmission systems that provide speed and torque conversions from a rotating power source. Being a central element of the drive train, they are relevant for the efficiency and durability of motor vehicles. In this work, we present a new approach for gearbox design: Modeling the design problem as a mixed-integer nonlinear program (MINLP) allows us to create gearbox designs from scratch for arbitrary requirements and—given enough time—to compute provably globally optimal designs for a given objective. We show how different degrees of freedom influence the runtime and present an exemplary solution.
Y1  - 2017
SN  - 978-3-319-55701-4
U6  - http://dx.doi.org/10.1007/978-3-319-55702-1_31
SP  - 227
EP  - 233
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Mayer, Jan
A1  - Hentschke, Reinhard
A1  - Hager, Jonathan
A1  - Hojdis, Nils
A1  - Karimi-Varnaneh, Hossein Ali
T1  - A Nano-Mechanical Instability as Primary Contribution to Rolling Resistance
JF  - Scientific Reports
Y1  - 2017
SN  - 2045-2322
VL  - 7
IS  - Article number 11275
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Garibaldi, F.
A1  - Beging, Stefan
A1  - Canese, R.
A1  - Carpinelli, G.
A1  - Clinthorne, N.
A1  - Colilli, S.
A1  - Cosentino, L.
A1  - Finocchiaro, P.
A1  - Giuliani, F.
A1  - Gricia, M.
A1  - Lucentini, M.
A1  - Majewski, S.
A1  - Monno, E.
A1  - Musico, P.
A1  - Santavenere, F.
A1  - Tödter, J.
A1  - Wegener, Hans-Peter
A1  - Ziemons, Karl
T1  - A novel TOF-PET MRI detector for diagnosis and follow up of the prostate cancer
JF  - European Physical Journal Plus
Y1  - 2017
U6  - http://dx.doi.org/10.1140/epjp/i2017-11662-x
SN  - 2190-5444
VL  - 132
IS  - 9
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - de Honde, Lukas
A1  - Porst, Dariusz
A1  - Digel, Ilya
ED  - Fischerauer, Alice
T1  - A randomized, observational thermographic study of the neck region before and after a physiotherapeutic intervention
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 122
EP  - 123
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - A Review of Configuration Design for Distributed Propulsion Transitioning VTOL Aircraft
T2  - Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A System Layout for Cognitive Service Robots
T2  - Cognitive Robot Architectures. Proceedings of EUCognition 2016
Y1  - 2017
SN  - 1613-0073
N1  - CEUR-WS Vol-1855
SP  - 44
EP  - 45
ER  - 
TY  - BOOK
A1  - Schneider, Bettina
A1  - Schneider, Wilhelm
T1  - Abschluss und Abschlussanalyse: systematische Darstellung in Übersichten
Y1  - 2017
SN  - 978-3-7369-9642-7
N1  - Reihe Betriebswirtschaftslehre in Übersichten ; 2
PB  - Cuvillier
CY  - Göttingen
ET  - 6. Auflage, Studienausgabe
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Ruff-Stahl, Hans-Joachim K.
T1  - Advances in Composite Manufacturing of Helicopter Parts
JF  - International Journal of Aviation, Aeronautics, and Aerospace
Y1  - 2017
U6  - http://dx.doi.org/10.15394/ijaaa.2017.1153
SN  - 2374-6793
VL  - 4
IS  - 1
ER  - 
TY  - JOUR
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
T1  - Advances in solar tower technology
JF  - Wiley interdisciplinary reviews : Energy and Environment : WIREs
Y1  - 2017
U6  - http://dx.doi.org/10.1002/wene.217
SN  - 2041-840X
VL  - 6
IS  - 1
SP  - 1
EP  - 19
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Müller, Wolfram
A1  - Jung, Alexander
A1  - Ahammer, Helmut
T1  - Advantages and problems of nonlinear methods applied to analyze physiological time signals: human balance control as an example
JF  - Scientific Reports
Y1  - 2017
SN  - 2045-2322
U6  - http://dx.doi.org/10.1038/s41598-017-02665-5
VL  - 7
IS  - Article number 2464
SP  - 1
EP  - 11
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Buhl, Eva Miriam
A1  - Baumann, Martin
A1  - Schmitz-Rode, Thomas
A1  - Slabu, Ioana
T1  - Agglomeration of magnetic nanoparticles and its effects on magnetic hyperthermia
JF  - Current Directions in Biomedical Engineering
Y1  - 2017
U6  - http://dx.doi.org/10.1515/cdbme-2017-0096
SN  - 2364-5504
VL  - 3
IS  - 2
SP  - 457
EP  - 460
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Marco, Heather G.
A1  - Ferrein, Alexander
T1  - AGNES: The African-German Network of Excellence in Science
T2  - Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017
Y1  - 2017
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Schänzle, Christian
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
T1  - Algorithmic system design using scaling and affinity laws
T2  - Operations Research Proceedings 2015
N2  - Energy-efficient components do not automatically lead to energy-efficient systems. Technical Operations Research (TOR) shifts the focus from the single component to the system as a whole and finds its optimal topology and operating strategy simultaneously. In previous works, we provided a preselected construction kit of suitable components for the algorithm. This approach may give rise to a combinatorial explosion if the preselection cannot be cut down to a reasonable number by human intuition. To reduce the number of discrete decisions, we integrate laws derived from similarity theory into the optimization model. Since the physical characteristics of a production series are similar, it can be described by affinity and scaling laws. Making use of these laws, our construction kit can be modeled more efficiently: Instead of a preselection of components, it now encompasses whole model ranges. This allows us to significantly increase the number of possible set-ups in our model. In this paper, we present how to embed this new formulation into a mixed-integer program and assess the run time via benchmarks. We present our approach on the example of a ventilation system design problem.
KW  - Optimal Topology
KW  - Piecewise Linearization
KW  - Ventilation System
KW  - Similarity Theory
Y1  - 2017
SN  - 978-3-319-42901-4
SN  - 978-3-319-42902-1
U6  - http://dx.doi.org/10.1007/978-3-319-42902-1
N1  - International Conference of the German, Austrian and Swiss Operations Research Societies (GOR, ÖGOR, SVOR/ASRO), University of Vienna, Austria, September 1-4, 2015
SP  - 605
EP  - 611
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Hauser, Christine
A1  - Ortner, Marion
A1  - Muggenthaler, Claudia
A1  - Diehl-Schmid, Janine
A1  - Angermann, Susanne
A1  - Hapfelmeier, Alexander
A1  - Schmaderer, Christoph
A1  - Grimmer, Timo
T1  - Altered neurovascular coupling as measured by optical imaging: a biomarker for Alzheimer’s disease
JF  - Scientific Reports
Y1  - 2017
U6  - http://dx.doi.org/10.1038/s41598-017-13349-5
SN  - 2045-2322
N1  - Article 12906
VL  - 7
IS  - 1
SP  - 1
EP  - 11
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Lopes, Pedro
A1  - Leandro, Jorge
A1  - Carvalho, Rita F.
A1  - Bung, Daniel B.
T1  - Alternating skimming flow over a stepped spillway
JF  - Environmental Fluid Mechanics
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s10652-016-9484-x
SN  - 1573-1510
VL  - 17
IS  - 2
SP  - 303
EP  - 322
PB  - Springer
CY  - Berlin
ER  - 
TY  - GEN
A1  - Olbertz, Klaus
T1  - Altersdiskriminierung bei altersabhängiger Staffelung der Urlaubsdauer
T2  - Gesellschafts- und Wirtschaftsrecht : GWR
Y1  - 2018
SN  - 1868-1816
N1  - Anm. zu LAG Mecklenburg-Vorpommern: Entscheidungsbesprechung zum Urteil v. 23.02.2016 - 2 Sa 192/15
SP  - 21
EP  - 21
ER  - 
TY  - JOUR
A1  - Rietsch, Stefan H. G.
A1  - Pfaffenrot, Viktor
A1  - Bitz, Andreas
A1  - Orzada, Stephan
A1  - Brunheim, Sascha
A1  - Lazik-Palm, Andrea
A1  - Theysohn, Jens M.
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
A1  - Kraff, Oliver
T1  - An 8-channel transceiver 7-channel receive RF coil setup for high SNR ultrahigh-field MRI of the shoulder at 7T
JF  - Medical Physics
Y1  - 2017
U6  - http://dx.doi.org/10.1002/mp.12612
SN  - 0094-2405
IS  - Article in press
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - JOUR
A1  - Honarvarfard, Elham
A1  - Gamella, Maria
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
T1  - An enzyme-based reversible Controlled NOT (CNOT) logic gate operating on a semiconductor transducer
JF  - Applied Materials Today
N2  - An enzyme-based biocatalytic system mimicking operation of a logically reversible Controlled NOT (CNOT) gate has been interfaced with semiconductor electronic transducers. Electrolyte–insulator–semiconductor (EIS) structures have been used to transduce chemical changes produced by the enzyme system to an electronically readable capacitive output signal using field-effect features of the EIS device. Two enzymes, urease and esterase, were immobilized on the insulating interface of EIS structure producing local pH changes performing XOR logic operation controlled by various combinations of the input signals represented by urea and ethyl butyrate. Another EIS transducer was functionalized with esterase only, thus performing Identity (ID) logic operation for the ethyl butyrate input. Both semiconductor devices assembled in parallel operated as a logically reversible CNOT gate. The present system, despite its simplicity, demonstrated for the first time logically reversible function of the enzyme system transduced electronically with the semiconductor devices. The biomolecular realization of a CNOT gate interfaced with semiconductors is promising for integration into complex biomolecular networks and future biosensor/biomedical applications.
KW  - Electrolyte–insulator–semiconductor
KW  - Capacitive field-effect
KW  - CNOT
KW  - XOR
KW  - Enzyme logic gate
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.apmt.2017.08.003
SN  - 2352-9407
VL  - 9
SP  - 266
EP  - 270
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Tran, Linda
A1  - Mottaghy, K.
A1  - Arlt-Körfer, Sabine
A1  - Waluga, Christian
A1  - Behbahani, Mehdi
T1  - An experimental study of shear-dependent human platelet adhesion and underlying protein-binding mechanisms in a cylindrical Couette system
JF  - Biomedizinische Technik
Y1  - 2017
U6  - http://dx.doi.org/10.1515/bmt-2015-0034
SN  - 0013-5585
VL  - 62
IS  - 4
SP  - 383
EP  - 392
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Zug, Sebastian
A1  - Niemueller, Tim
A1  - Hochgeschwender, Nico
A1  - Seidensticker, Kai
A1  - Seidel, Martin
A1  - Friedrich, Tim
A1  - Neumann, Tobias
A1  - Karras, Ulrich
A1  - Kraetzschmar, Gerhard K.
A1  - Ferrein, Alexander
T1  - An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues
T2  - RoboCup 2016: Robot World Cup XX. RoboCup 2016.
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - http://dx.doi.org/10.1007/978-3-319-68792-6_13
N1  - Lecture Notes in Computer Science, LNCS, Vol 9776
SP  - 157
EP  - 168
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Bitz, Andreas
A1  - Johst, Sören
A1  - Gratz, Marcel
A1  - Völker, Maximilian N.
A1  - Kraff, Oliver
A1  - Abuelhaija, Ashraf
A1  - Fiedler, Thomas M.
A1  - Solbach, Klaus
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI
JF  - Frontiers in Physics
Y1  - 2017
U6  - http://dx.doi.org/10.3389/fphy.2017.00017
SN  - 2296-424X
N1  - Article number 17
VL  - 5
IS  - Jun
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Mykoniou, K.
A1  - Butenweg, Christoph
T1  - Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables
the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by
employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical
component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results
manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.
KW  - liquid storage tank
KW  - seismic isolation
KW  - elastomeric bearing
KW  - friction pendulum bearing
KW  - simplified approach
Y1  - 2017
N1  - Paper No 2246
SP  - 1
EP  - 14
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Analysis of Big Data Streams to obtain Braking Reliability  Information for Train Protection systems
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Holler, Stefan
T1  - Analysis of cylindrical granular material silos under seismic excitation
JF  - Buildings
N2  - Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil–structure interaction effects are taken into account.
KW  - granular silo
KW  - earthquake engineering
KW  - hypoplasticity
KW  - nonlinear transient analyses
Y1  - 2017
U6  - http://dx.doi.org/10.3390/buildings7030061
SN  - 2075-5309
VL  - 7
IS  - 3
SP  - 1
EP  - 12
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Liebenstund, Lena
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Herrmann, Ulf
A1  - Dueing, Andreas
T1  - Analytic method for material aging and quality analyzing to forecast long time stability of plastic micro heliostat components
T2  - AIP Conference Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.1063/1.4984388
VL  - 1850
IS  - 1
SP  - 030045-1
EP  - 030045-8
ER  - 
TY  - JOUR
A1  - Pfaff, Raphael
T1  - Apps für den Güterwagen? Wie der Güterwagen 4.0 die effiziente Integration der Güterbahn in ERTMS ermöglicht
JF  - Ingenieurspiegel
Y1  - 2017
IS  - 2
SP  - 1
EP  - 2
ER  - 
TY  - JOUR
A1  - Olbertz, Klaus
T1  - Arbeitsrechtliche Aspekte beim Rechtsformwechsel
JF  - Gesellschafts- und Wirtschaftsrecht : GWR
Y1  - 2018
SN  - 1868-1816
SP  - 314
EP  - 317
PB  - Beck
CY  - München
ER  - 
TY  - CHAP
A1  - Thurn, Laura
A1  - Gebhardt, Andreas
T1  - Arousing Enthusiasm for STEM: Teaching 3D Printing Technology
T2  - Conference Proceedings: New Perspectives in Science Education
Y1  - 2017
SN  - 978-88-6292-847-2
SP  - 87
EP  - 92
PB  - liberiauniversitaria.it
CY  - Padua
ER  - 
TY  - CHAP
A1  - Kroll-Ludwigs, Kathrin
ED  - Weller, Marc-Philippe
ED  - Kindler, Peter
T1  - Art. 48 EGBGB: Wahl eines in einem anderen Mitgliedstaat der Europäischen Union erworbenen Namens, Rn. 5-8, Rn. 11-14, Rn. 45-47, Rn. 48-51
T2  - Beck‘scher Online-Großkommentar zum Bürgerlichen Recht (BeckOGK), Band: Internationales Privatrecht
Y1  - 2017
PB  - C.H.Beck
CY  - München
ER  - 
TY  - JOUR
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Artificial Neural Networks and pattern recognition for air-water flow velocity estimation using a single-tip optical fibre probe
JF  - Journal of Hydro-environment Research
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.jher.2017.08.004
SN  - 1570-6443
VL  - 19
IS  - 3
SP  - 150
EP  - 159
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Olbertz, Klaus
T1  - Aufhebungsverträge und Sperrzeit beim Bezug von Arbeitslosengeld - Neue Gestaltungsmöglichkeiten aufgrund geänderter Geschäftsanweisung der Bundesagentur für Arbeit
JF  - NWB - Steuer- und Wirtschaftsrecht
Y1  - 2018
SN  - 1860-9449
IS  - 21
SP  - 1588
EP  - 1593
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schäfer, Johannes
A1  - Wilms, Konrad
A1  - Schleser, Markus
T1  - Aufmischungsarmes, dickschichtiges MSG-Auftragschweißen mit entkoppelter Zweidrahttechnik
JF  - Schweißen und Schneiden
N2  - Für Auftragschweißaufgaben existiert eine Vielzahl an verfahrenstechnischen
Prozessvarianten, die je nach Charakteristik und Anwendungsfall
ausgewählt werden. Ein Nachteil der vorwiegend verwendeten Metall-
Schutzgasschweißprozesse (MSG) für das Auftragschweißen ist durch die
direkte Kopplung von Drahtvorschub zu Energieeintrag gegeben. Die vorgestellte
Zweidraht-Prozessvariante kann durch die Ausbildung eines übertragenen
und eines nicht-übertragenen Lichtbogens die elektrische Leistung
beider Lichtbögen variieren und damit einen direkten Einfluss auf
die Prozessgrößen Abschmelzleistung und Aufschmelzgrad nehmen. Im
Speziellen besteht über die Entkopplung von Drahtvorschub zu Schweißstromstärke
die Möglichkeit eines niederenergetischen Betriebs trotz hoher
Drahtvorschubgeschwindigkeit. Damit lassen sich Aufschmelzgrade
unter 2% umsetzen und Abschmelzleistungen bis zu 15 kg/h realisieren.
Y1  - 2017
SN  - 0036-7184
VL  - 69
IS  - 12
SP  - 838
EP  - 843
PB  - DVS Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Olbertz, Klaus
T1  - Auswirkungen des neuen Entgelttransparenzgesetzes - Viel Aufwand für Unternehmen, wenig Greifbares für Arbeitnehmer
JF  - NWB - Steuer- und Wirtschaftsrecht
Y1  - 2018
SN  - 1860-9449
IS  - 40
SP  - 3068
EP  - 3075
ER  - 
TY  - CHAP
A1  - Ayed, Anis Haj
A1  - Striegan, Constantin J. D.
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Kazari, M.
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
T1  - Automated design space exploration of the hydrogen fueled "Micromix" combustor technology
N2  - Combined with the use of renewable energy sources for
its production, Hydrogen represents a possible alternative gas
turbine fuel for future low emission power generation. Due to
its different physical properties compared to other fuels such
as natural gas, well established gas turbine combustion
systems cannot be directly applied for Dry Low NOx (DLN)
Hydrogen combustion. This makes the development of new
combustion technologies an essential and challenging task
for the future of hydrogen fueled gas turbines.
The newly developed and successfully tested “DLN
Micromix” combustion technology offers a great potential to
burn hydrogen in gas turbines at very low NOx emissions.
Aiming to further develop an existing burner design in terms
of increased energy density, a redesign is required in order to
stabilise the flames at higher mass flows and to maintain low
emission levels.
For this purpose, a systematic design exploration has
been carried out with the support of CFD and optimisation
tools to identify the interactions of geometrical and design
parameters on the combustor performance. Aerodynamic
effects as well as flame and emission formation are observed
and understood time- and cost-efficiently. Correlations
between single geometric values, the pressure drop of the
burner and NOx production have been identified as a result.
This numeric methodology helps to reduce the effort of
manufacturing and testing to few designs for single
validation campaigns, in order to confirm the flame stability
and NOx emissions in a wider operating condition field.
Y1  - 2017
N1  - Proceedings of the 1st Global Power and Propulsion Forum
GPPF 2017, Jan 16-18, 2017, Zurich, Switzerland
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Abbas, Karim
T1  - Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings
T2  - The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16
Y1  - 2017
U6  - http://dx.doi.org/10.1051/matecconf/20179403008
N1  - MATEC Web Conf. Vol 94, 2017, 03008
MATEC Web of Conferences 94, 03008 (2017)
ET  - Vol. 94
ER  - 
TY  - CHAP
A1  - Niemueller, T.
A1  - Lakemeyer, G.
A1  - Reuter, S.
A1  - Jeschke, S.
A1  - Ferrein, Alexander
T1  - Benchmarking of Cyber-Physical Systems in Industrial Robotics: The RoboCup Logistics League as a CPS Benchmark Blueprint
T2  - Cyber-Physical Systems: Foundations, Principles and Applications
N2  - In the future, we expect manufacturing companies to follow a new paradigm that mandates more automation and autonomy in production processes. Such smart factories will offer a variety of production technologies as services that can be combined ad hoc to produce a large number of different product types and variants cost-effectively even in small lot sizes. This is enabled by cyber-physical systems that feature flexible automated planning methods for production scheduling, execution control, and in-factory logistics.

During development, testbeds are required to determine the applicability of integrated systems in such scenarios. Furthermore, benchmarks are needed to quantify and compare system performance in these industry-inspired scenarios at a comprehensible and manageable size which is, at the same time, complex enough to yield meaningful results.

In this chapter, based on our experience in the RoboCup Logistics League (RCLL) as a specific example, we derive a generic blueprint for how a holistic benchmark can be developed, which combines a specific scenario with a set of key performance indicators as metrics to evaluate the overall integrated system and its components.
KW  - Smart factory
KW  - Industry 4.0
KW  - Cyber-physical systems
KW  - Multi-robot systems
KW  - Autonomous mobile robots
Y1  - 2017
U6  - http://dx.doi.org/10.1016/B978-0-12-803801-7.00013-4
SP  - 193
EP  - 207
PB  - Academic Press
CY  - London
ER  - 
TY  - JOUR
A1  - Reichert, Walter
T1  - Berufseinstieg für Wirtschaftsingenieure - Bachelor oder Master?
JF  - Berufsstart
Y1  - 2017
ER  - 
TY  - BOOK
A1  - Timme, Michael
T1  - BGB Crashkurs: der sichere Weg durch die Prüfung
Y1  - 2017
SN  - 978-3-406-70586-1
PB  - C.H. Beck
CY  - München
ET  - 4. Auflage
ER  - 
TY  - CHAP
A1  - Jabbari, Medisa
A1  - Bhattarai, Aroj
A1  - Anding, Ralf
A1  - Staat, Manfred
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Biomechanical simulation of different prosthetic meshes for repairing uterine/vaginal vault prolapse
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 118
EP  - 119
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Birgel, Stefan
A1  - Leschinger, Tim
A1  - Wegmann, Kilian
A1  - Staat, Manfred
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Calculation of muscle forces and joint reaction loads in shoulder area via an OpenSim based computer calculation
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
N1  - In der Druckausgabe des Abstractbandes ist dieser Beitrag lose als Erratum beigefügt.
SP  - 116
EP  - 117
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - JOUR
A1  - Scholl, Fabio
A1  - Morais, Paulo
A1  - Gabriel, Rayla
A1  - Schöning, Michael Josef
A1  - Siqueira, Jose Roberto, Jr.
A1  - Caseli, Luciano
T1  - Carbon nanotubes arranged as smart interfaces in lipid Langmuir-Blodgett films enhancing the enzymatic properties of penicillinase for biosensing applications
JF  - Applied Materials & Interfaces
N2  - In this paper, carbon nanotubes (CNTs) were incorporated in penicillinase-phospholipid Langmuir and Langmuir–Blodgett (LB) films to enhance the enzyme catalytic properties. Adsorption of the penicillinase and CNTs at dimyristoylphosphatidic acid (DMPA) monolayers at the air–water interface was investigated by surface pressure–area isotherms, vibrational spectroscopy, and Brewster angle microscopy. The floating monolayers were transferred to solid supports through the LB technique, forming mixed DMPA-CNTs-PEN films, which were investigated by quartz crystal microbalance, vibrational spectroscopy, and atomic force microscopy. Enzyme activity was studied with UV–vis spectroscopy and the feasibility of the supramolecular device nanostructured as ultrathin films were essayed in a capacitive electrolyte–insulator–semiconductor (EIS) sensor device. The presence of CNTs in the enzyme–lipid LB film not only tuned the catalytic activity of penicillinase but also helped conserve its enzyme activity after weeks, showing increased values of activity. Viability as penicillin sensor was demonstrated with capacitance/voltage and constant capacitance measurements, exhibiting regular and distinctive output signals over all concentrations used in this work. These results may be related not only to the nanostructured system provided by the film, but also to the synergism between the compounds on the active layer, leading to a surface morphology that allowed a fast analyte diffusion because of an adequate molecular accommodation, which also preserved the penicillinase activity. This work therefore demonstrates the feasibility of employing LB films composed of lipids, CNTs, and enzymes as EIS devices for biosensing applications.
Y1  - 2017
U6  - http://dx.doi.org/10.1021/acsami.7b08095
SN  - 1944-8252
VL  - 9
IS  - 36
SP  - 31054
EP  - 31066
PB  - ACS
CY  - Washington
ER  - 
TY  - PAT
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Bayer, Robin
A1  - Gossmann, Matthias
T1  - Celldrum electrode arrangement for measuring mechanical stress [Patent of invention]
N2  - The invention pertains to a CellDrum electrode arrangement for measuring mechanical stress, comprising a mechanical holder (1 ) and a non-conductive membrane (4), whereby the membrane (4) is at least partially fixed at its circumference to the mechanical holder (1), keeping it in place when the membrane (4) may bend due to forces acting on the membrane (4), the mechanical holder (1) and the membrane (4) forming a container, whereby the membrane (1) within the container comprises an cell- membrane compound layer or biological material (3) adhered to the deformable membrane 4 which in response to stimulation by an agent may exert mechanical stress to the membrane (4) such that the membrane bending stage changes whereby the container may be filled with an electrolyte, whereby an electric contact (2) is arranged allowing to contact said electrolyte when filled into to the container, whereby within a predefined geometry to the fixing of the membrane (4) an electrode (7) is arranged, whereby the electrode (7) is electrically insulated with respect to the electric contact (2) as well as said electrolyte, whereby mechanical stress due to an agent may be measured as a change in capacitance.
Y1  - 2017
N1  - Patent auch unter EP3403090, CN109477828, US2019033245 und LU92948 veröffentlicht.
PB  - WIPO
CY  - Geneva
ER  - 
TY  - JOUR
A1  - Ayed, Anis Haj
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Bohn, D.
T1  - CFD based exploration of the dry-low-NOx hydrogen micromix combustion technology at increased energy densities
JF  - Propulsion and Power Research
KW  - Micromix combustion
KW  - Hydrogen gas turbine
KW  - Hydrogen combustion
KW  - High hydrogen combustion
KW  - Dry-low-NOx (DLN) combustion
Y1  - 2017
SN  - 2212-540X
U6  - http://dx.doi.org/10.1016/j.jppr.2017.01.005
VL  - 6
IS  - 1
SP  - 15
EP  - 24
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Wolf, Martin
A1  - König, Johannes Alexander
ED  - Eibl, Maximilian
ED  - Gaedke, Martin
T1  - Competence Developing Games – Ein Überblick
T2  - INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft für Informatik
N2  - Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu überführen. In diesem Artikel wird der Überbegriff „Competence Developing Games“ definiert und anhand von Beispielen erläutert. Dafür werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erläutert und eine Zuordnung durch-geführt.
KW  - Competence Developing Gam
KW  - Serious Game
KW  - Education
KW  - Gamification
KW  - Bewertungsframework
Y1  - 2017
SN  - 978-3-88579-669-5
U6  - http://dx.doi.org/10.18420/in2017_32
SP  - 385
EP  - 391
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Shahidi, Parham
A1  - Enning, Manfred
T1  - Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Wolisz, Henryk
A1  - Schütz, Thomas
A1  - Blanke, Tobias
A1  - Hagenkamp, Markus
A1  - Kohrn, Markus
A1  - Wesseling, Mark
A1  - Müller, Dirk
T1  - Cost optimal sizing of smart buildings' energy system components considering changing end-consumer electricity markets
JF  - Energy
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.energy.2017.06.025
VL  - 137
SP  - 715
EP  - 728
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Katz, Evgeny
A1  - Schöning, Michael Josef
T1  - Coupling of Biomolecular Logic Gates with Electronic Transducers: From Single Enzyme Logic Gates to Sense/Act/Treat Chips
JF  - Electroanalysis
N2  - The integration of biomolecular logic principles with electronic transducers allows designing novel digital biosensors with direct electrical output, logically triggered drug-release, and closed-loop sense/act/treat systems. This opens new opportunities for advanced personalized medicine in the context of theranostics. In the present work, we will discuss selected examples of recent developments in the field of interfacing enzyme logic gates with electrodes and semiconductor field-effect devices. Special attention is given to an enzyme OR/Reset logic gate based on a capacitive field-effect electrolyte-insulator-semiconductor sensor modified with a multi-enzyme membrane. Further examples are a digital adrenaline biosensor based on an AND logic gate with binary YES/NO output and an integrated closed-loop sense/act/treat system comprising an amperometric glucose sensor, a hydrogel actuator, and an insulin (drug) sensor.
Y1  - 2017
U6  - http://dx.doi.org/10.1002/elan.201700208
SN  - 1521-4109
VL  - 29
IS  - 8
SP  - 1840
EP  - 1849
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Zwilling, Frederik
A1  - Lakemeyer, Gerhard
A1  - Löbach, Matthias
A1  - Reuter, Sebastian
A1  - Jeschke, Sabina
A1  - Ferrein, Alexander
T1  - Cyber-Physical System Intelligence
T2  - Industrial Internet of Things
N2  - Cyber-physical systems are ever more common in manufacturing industries. Increasing their autonomy has been declared an explicit goal, for example, as part of the Industry 4.0 vision. To achieve this system intelligence, principled and software-driven methods are required to analyze sensing data, make goal-directed decisions, and eventually execute and monitor chosen tasks. In this chapter, we present a number of knowledge-based approaches to these problems and case studies with in-depth evaluation results of several different implementations for groups of autonomous mobile robots performing in-house logistics in a smart factory. We focus on knowledge-based systems because besides providing expressive languages and capable reasoning techniques, they also allow for explaining how a particular sequence of actions came about, for example, in the case of a failure.
KW  - Smart factory
KW  - Industry 4.0
KW  - Multi-robot systems
KW  - Autonomous mobile robots
KW  - RoboCup
Y1  - 2017
SN  - 978-3-319-42559-7
U6  - http://dx.doi.org/10.1007/978-3-319-42559-7_17
N1  - Springer Series in Wireless Technology
SP  - 447
EP  - 472
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
T1  - Das Dokumentarische als offene Konstruktion
T2  - Doris Frohnapfel, Documentary derivative
Y1  - 2017
SN  - 978-3-942040-03-7
N1  - Diese Publikation erscheint anlässlich: Doris Frohnapfel, Documentary Derivative, COFA Contemporary 2016, 17.-20.11.2016, Halle 11.2, Stand B 028, Köln
SP  - 5
EP  - 23
PB  - Totalverlag
CY  - Köln
ER  - 
TY  - JOUR
A1  - Balzer, Hermann
A1  - Streit, Daniel
T1  - Das Translationsrisiko multinationaler Konzerne in Deutschland: Eine explorative Analyse von Verständnis, Bedeutung und Management-Praxis mit Hilfe der Critical Incident Technique
JF  - Schmalenbachs Zeitschrift für betriebswirtschaftliche Forschung
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s41471-017-0029-x
SN  - 2366-6153
N1  - Arbeitskreis Finanzierung der Schmalenbach-Gesellschaft e.V.
IS  - Online first
SP  - 1
EP  - 40
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Weber, Niklas
A1  - Wolf, Martin
ED  - Barton, Thomas
T1  - Datenerhebung für die CDG-Forschung
T2  - Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)
Y1  - 2017
SN  - 978-3-944330-56-3
SP  - 218
EP  - 227
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - JOUR
A1  - Golland, Alexander
A1  - Kriegesmann, Torben
ED  - Härting, Niko
T1  - Der Schutz virtueller Identitäten durch die DSGVO
JF  - PinG Privacy in Germany
N2  - Die Frage des Schutzes von virtuellen Identitäten ist – insbesondere bei Online-Medien – von elementarer Bedeutung: Ihre Beantwortung entscheidet über die Anwendbarkeit des Datenschutzrechts auf vermeintlich anonyme Nutzerprofile im Internet. Eine differenzierte Auseinandersetzung mit der Problematik, ob und unter welchen Umständen virtuelle Identitäten dem Datenschutzrecht unterfallen, fehlt bislang. Der vorliegende Beitrag gibt einen Überblick über den Schutz virtueller Identitäten und zeigt Ansätze auf, mittels derer bestimmt werden kann, wann virtuelle Identitäten nach Inkrafttreten der DSGVO durch das Datenschutzrecht geschützt werden.
Y1  - 2017
SN  - 2197-1862
U6  - http://dx.doi.org/10.37307/j.2196-9817.2017.02.03
VL  - 5
IS  - 2
SP  - 45
EP  - 50
PB  - Erich Schmidt Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Davrajh, Shaniel
A1  - Ferrein, Alexander
T1  - Design considerations of the duo fugam dual rotor UAV
T2  - 2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)
Y1  - 2017
SN  - 978-1-5386-2314-5
U6  - http://dx.doi.org/10.1109/RoboMech.2017.8261115
SP  - 7
EP  - 13
ER  - 
TY  - CHAP
A1  - Molinnus, Denise
A1  - Hardt, Gabriel
A1  - Käver, Larissa
A1  - Willenberg, Holger S.
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Detection of Adrenaline Based on Bioelectrocatalytical System to Support Tumor Diagnostic Technology
T2  - MDPI Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.3390/proceedings1040506
ER  - 
TY  - JOUR
A1  - Sousa, Marcos A. M.
A1  - Siqueira, Jose R. Jr.
A1  - Vercik, Andres
A1  - Schöning, Michael Josef
A1  - Oliveira, Osvaldo N. Jr.
T1  - Determining the optimized layer-by-layer film architecture with dendrimer/carbon nanotubes for field-effect sensors
JF  - IEEE Sensors Journal
N2  - The capacitive electrolyte–insulator–semiconductor (EIS) structure is a typical device based on a field-effect sensor platform. With a simple silicon-based structure, EIS have been useful for several sensing applications, especially with incorporation of nanostructured films to modulate the ionic transport and the flat-band potential. In this paper, we report on ion transport and changes in flat-band potential in EIS sensors made with layer-by-layer films containing poly(amidoamine) (PAMAM) dendrimer and single-walled carbon nanotubes (SWNTs) adsorbed on p-Si/SiO 2 /Ta 2 O 5 chips with an Al ohmic contact. The impedance spectra were fitted using an equivalent circuit model, from which we could determine parameters such as the double-layer capacitance. This capacitance decreased with the number of bilayers owing to space charge accumulated at the electrolyte–insulator interface, up to three PAMAM/SWNTs bilayers, after which it stabilized. The charge-transfer resistance was also minimum for three bilayers, thus indicating that this is the ideal architecture for an optimized EIS performance. The understanding of the influence of nanostructures and the fine control of operation parameters pave the way for optimizing the design and performance of new EIS sensors.
Y1  - 2017
U6  - http://dx.doi.org/10.1109/JSEN.2017.2653238
SN  - 1558-1748
VL  - 17
IS  - 6
SP  - 1735
EP  - 1740
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
A1  - Dahmann, Peter
T1  - Developing a climbing maintenance robot for tower and rotor blade service of wind turbines
T2  - Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)
Y1  - 2017
SN  - 978-3-319-49058-8
U6  - http://dx.doi.org/10.1007/978-3-319-49058-8_34
N1  - Advances in Robot Design and Intelligent Control ; Vol. 540
SP  - 310
EP  - 319
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Development and Testing of a Low NOX Micromix Combustion Chamber for an Industrial Gas Turbine
JF  - International Journal of Gas Turbine, Propulsion and Power Systems
N2  - The Micromix combustion principle, based on cross-flow mixing of air and hydrogen, promises low emission applications in future gas turbines. The Micromix combustion takes place in several hundreds of miniaturized diffusion-type micro-flames. The major advantage is the inherent safety against flash-back and low NOx-emissions due to a very short residence time of reactants in the flame region. The paper gives insight into the Micromix design and scaling procedure for different energy densities and the interaction of scaling laws and key design drivers in gas turbine integration. Numerical studies, experimental testing, gas turbine integration and interface considerations are evaluated. The aerodynamic stabilization of the miniaturized flamelets and the resulting flow field, flame structure and NOx formation are analysed experimentally and numerically. The results show and confirm the successful adaption of the low NOx Micromix characteristics for a range of different nozzle sizes, energy densities and thermal power output.
Y1  - 2017
U6  - http://dx.doi.org/10.38036/jgpp.9.1_27
SN  - 1882-5079
VL  - 9
IS  - 1
SP  - 27
EP  - 36
ER  - 
TY  - CHAP
A1  - Schneider, Oliver
A1  - Al Hakim, Taher
A1  - Kayser, Peter
A1  - Digel, Ilya
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Development and trials of a test chamber for ultrasound-assisted sampling of living cells from solid surfaces
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 96
EP  - 97
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - JOUR
A1  - Röhlen, Desiree
A1  - Pilas, Johanna
A1  - Schöning, Michael Josef
A1  - Selmer, Thorsten
T1  - Development of an amperometric biosensor platform for the combined determination of l-Malic, Fumaric, and l-Aspartic acid
JF  - Applied Biochemistry and Biotechnology
N2  - Three amperometric biosensors have been developed for the detection of L-malic acid, fumaric acid, and L -aspartic acid, all based on the combination of a malate-specific dehydrogenase (MDH, EC 1.1.1.37) and diaphorase (DIA, EC 1.8.1.4). The stepwise expansion of the malate platform with the enzymes fumarate hydratase (FH, EC 4.2.1.2) and aspartate ammonia-lyase (ASPA, EC 4.3.1.1) resulted in multi-enzyme reaction cascades and, thus, augmentation of the substrate spectrum of the sensors. Electrochemical measurements were carried out in presence of the cofactor β-nicotinamide adenine dinucleotide (NAD+) and the redox mediator hexacyanoferrate (III) (HCFIII). The amperometric detection is mediated by oxidation of hexacyanoferrate (II) (HCFII) at an applied potential of + 0.3 V vs. Ag/AgCl. For each biosensor, optimum working conditions were defined by adjustment of cofactor concentrations, buffer pH, and immobilization procedure. Under these improved conditions, amperometric responses were linear up to 3.0 mM for L-malate and fumarate, respectively, with a corresponding sensitivity of 0.7 μA mM−1 (L-malate biosensor) and 0.4 μA mM−1 (fumarate biosensor). The L-aspartate detection system displayed a linear range of 1.0–10.0 mM with a sensitivity of 0.09 μA mM−1. The sensor characteristics suggest that the developed platform provides a promising method for the detection and differentiation of the three substrates.
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s12010-017-2578-1
SN  - 1559-0291
VL  - 183
SP  - 566
EP  - 581
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Pfaff, Raphael
A1  - Enning, Manfred
T1  - Die nachhaltige Alternative zum autonomen Lastwagen
JF  - Deine Bahn
Y1  - 2017
IS  - 10
SP  - 22
EP  - 26
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
T1  - Die neue Erdbebenfibel. Neue Hilfsmittel für die Leichtbetonindustrie
JF  - Tagungsband 61. Ulmer Beton Tage 2017
Y1  - 2017
ER  - 
TY  - JOUR
A1  - Olbertz, Klaus
A1  - Groth, Alexandra
T1  - Die Reform des Mutterschutzrechts - Überblick über die wesentlichen Änderungen
JF  - NWB - Steuer- und Wirtschaftsrecht
Y1  - 2018
SN  - 1860-9449
IS  - 25
SP  - 1883
EP  - 1891
PB  - NWB Verlag GmbH & Co. KG
CY  - Herne
ER  - 
TY  - BOOK
A1  - Niethammer, Bernhard
A1  - Fissabre, Anke
T1  - Die Steiff Spielwarenfabrik in Giengen / Brenz : Ein unbekanntes Meisterwerk der frühen Moderne
Y1  - 2017
SN  - 978-3-943164-03-9
PB  - Geymüller Verlag für Architektur
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Chen, Chao
A1  - Jost, Peter
A1  - Volker, Hanno
A1  - Kaminski, Marvin
A1  - Wirtssohn, Matti R.
A1  - Engelmann, Ulrich M.
A1  - Krüger, K.
A1  - Schlich, Franziska F.
A1  - Schlockermann, Carl
A1  - Lobo, Ricardo P.S.M.
A1  - Wuttig, Matthias
T1  - Dielectric properties of amorphous phase-change materials
JF  - Physical Review B
Y1  - 2017
U6  - http://dx.doi.org/10.1103/PhysRevB.95.094111
SN  - 2469-9950
VL  - 95
IS  - 9
SP  - Article number 094111
ER  - 
TY  - JOUR
A1  - Dantism, Shahriar
A1  - Takenaga, Shoko
A1  - Wagner, Torsten
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Differential imaging of the metabolism of bacteria and eukaryotic cells based on light-addressable potentiometric sensors
JF  - Electrochimica Acta
N2  - A light-addressable potentiometric sensor (LAPS) is a field-effect-based potentiometric sensor with an electrolyte/insulator/semiconductor (EIS) structure, which is able to monitor analyte concentrations of (bio-)chemical species in aqueous solutions in a spatially resolved way. Therefore, it is also an appropriate tool to record 2D-chemical images of concentration variations on the sensor surface. In the present work, two differential, LAPS-based measurement principles are introduced to determine the metabolic activity of Escherichia coli (E. coli) K12 and Chinese hamster ovary (CHO) cells as test microorganisms. Hereby, we focus on i) the determination of the extracellular acidification rate (ΔpH/min) after adding glucose solutions to the cell suspensions; and ii) recording the amplitude increase of the photocurrent (Iph) related to the produced acids from E. coli K12 bacteria and CHO cells on the sensor surface by 2D-chemical imaging. For this purpose, 3D-printed multi-chamber structures were developed and mounted on the planar sensor-chip surface to define four independent compartments, enabling differential measurements with varying cell concentrations. The differential concept allows eliminating unwanted drift effects and, with the four-chamber structures, measurements on the different cell concentrations were performed simultaneously, thus reducing also the overall measuring time.
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.electacta.2017.05.196
SN  - 0013-4686
VL  - 246
SP  - 234
EP  - 241
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
T1  - Dimensionen 1-2017 : Magazin der FH Aachen University of Applied Sciences - Struktur und Freiheit
N2  - Inhalt Dimensionen 01-2017:

6 Struktur und Freiheit : Wie die Digitalisierung die Lehre beeinflusst
12 Wie wir in Zukunft konsumieren : Vom intelligenten Kühlschrank bis zur selbst gedruckten Brille
16 Baby unter Beobachtung : Forscher der FH decken massive Sicherheitsmängel bei Babymonitoringsystem auf
18 "In unserem Auge ist viel los" : Anissa Frank hat sich in ihrer Bachelorarbeit mit dem Phänomenen des kreisrunden Makulaloches beschäftigt
20 #totallove : Was kommt nach dem "Hotel Total"?
24 Das graue Wunder : Dirk Thal, Leon Bockstegers und Erick Regehr sind überzeugt: "Beton kann mehr"
26 Auftrieb : Zwei FH-Innovationen landen beim Luftfahrtkonzern Airbus
30 Ich möchte die Kunst demokratisieren : David Gerards bietet Künstlern mit dem "Poebel" eine Plattform
32 Zwischen Orient und Okzident : Unterwegs in Marokko
38 Einfach genau hinhören und horchen : Interview mit Prof. Dr. Hans-Joachim Blome zum Thema Gravitationswellen
42 Die Entdeckung eines Architekten : Auf den Spuren des Architekten Leonardo da Vinci
46 Über den Dächern von Chicago
48 Eine Prothese aus dem 3D-Drucker : Studierende engagieren sich für ein Projekt, das vielen Menschen in Krisenregionen helfen kann
50 Ist der Tod das Ende unserer Persönlichkeit? Prof. Dr. Walter van Laack ist Experte auf dem Gebiet Nahtoderfahrungen
52 Von Aachen in die ganze Welt : Die Summer Schools sind der Exportschlager der FH Aachen
59 Ein Stipendium zum Geburtstag
60 Keine Chance für Shimmy
58 Kopfnuss
61 Neues Buch über Prof. Rudold Schwarz
62 Silber beim PR-Bild-Award
63 Impressum
T3  - Dimensionen -  Magazin der FH Aachen University of Applied Sciences - 2017, 1 
Y1  - 2017
CY  - Aachen
ER  - 
TY  - JOUR
T1  - Dimensionen 2-2017: Magazin der FH Aachen University of Applied Sciences - Blackout : Wenn bei uns allen das Licht ausgeht
N2  - Blackout : Wenn bei uns allen das Licht ausgeht
Inhaltsverzeichnis:
06 Wenn im Elfenbeinturm das Licht ausgeht: Zur gesellschaftlichen Verantwortung der Wissenschaft
12 Mekka der Solarforschung: Das Solar-Institut Jülich feiert Jubiläum- und blick nach vorn
16 Hinter den Steinen: FH Aachen und die Stiftung Smart Building entwickeln gemeinsam den neuen Studiengang Smart Building Engineering
18 Die Biogaspioniere: Das Institut NOWUM-Energy sucht neue Perspektiven für die Energieerzeugung
22 Elektrisierend: Studentin entwirft Tapuya-Bühne für Electrisize Festival
24 keep calm and don´t panic
26 Der Markt als Experimentierfeld: Die Wirtschaft wandelt sich - die FH mischt in der Gründerszene mit
30 Mit einem Studium in ein neues Leben: Betreuungskonzept für Geflüchtete an der FH Aachen
32 Spuren im Staub
34 Auf Archimedes´ Spuren: Studierende stechen mit Betonkanus in See
36 "Ich investiere in Menschen": Interview mit Alexander Wilden, Inhaber der schwartz Gruppe mit Hauptsitz in Simmerath
40 Wie im richtigen Leben: 10 Jahre pro8: Rückblick und Ausblick
42 Zwei Kreuze für die Christuskirche: Entwürfe von Architekturstudienden werden umgesetzt
44 Eine gute Ausbildung ist prkatisch: Florian Kessel macht grenzüberschreitende Karriere
46 Er will das Feuer weitergeben: Holzbaupionier Prof. Hermann Blumer lehrt an der FH
50 Aufwind für innovative Lehre: Fünf Projekte im Rahmen des SQSL-Programms ausgezeichnet
51 Der einsame Turm: Kopfnuss
52 Vom Winde verweht: Benedikt Lösch kommt bei der Segelweltmeisterschaft auf Rang 28
54 Wüstensand und fliegende Roboter: Team des MASKOR-Instituts erreicht Finalrunde beim MBZIRC-Wettbewerb
56 Die Rattan-Revolution: Das Start-up "out for space" erfindet den Werkstoff neu
T3  - Dimensionen -  Magazin der FH Aachen University of Applied Sciences - 2017, 2 
Y1  - 2017
SP  - 62 Seiten
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Bouffier, Anna
A1  - Gaedicke, Sonja
A1  - Leicht-Scholten, Carmen
T1  - Diversifying engineering education: a transdisciplinary approach from RWTH Aachen University
T2  - Strategies for increasing diversity in engineering majors and careers
N2  - Engineers and therefore engineering education are challenged by the increasing complexity of questions to be answered globally. The education of future engineers therefore has to answer with curriculums that build up relevant skills. This chapter will give an example how to bring engineering and social responsibility successful together to build engineers of tomorrow. Through the integration of gender and diversity perspectives, engineering research and teaching is expanded with new perspectives and contents providing an important potential for innovation. Aiming on the enhancement of engineering education with distinctive competencies beyond technical expertise, the teaching approach introduced in the chapter represents key factors to ensure that coming generations of engineers will be able to meet the requirements and challenges a changing globalized world holds for them. The chapter will describe how this approach successfully has been implemented in the curriculum in engineering of a leading technical university in Germany.
Y1  - 2017
SN  - 9781522522126
U6  - http://dx.doi.org/10.4018/978-1-5225-2212-6.ch010
SP  - 201
EP  - 235
PB  - IGI Global
CY  - Hershey, USA
ER  - 
TY  - JOUR
A1  - Steuer-Dankert, Linda
A1  - Sharma, Mamta Rameshwarlal
A1  - Bleck, Wolfgang
A1  - Leicht-Scholten, Carmen
T1  - Diversity and innovation management in large research groups
JF  - International Journal of Innovation Management
N2  - Contemporary research appreciates a diverse workforce as a potential source of innovation. Researchers explore the fine details of why diversity management is central for generating innovations in heterogeneous research groups and how it could be effectively implemented into organizations. Complex research associations that discuss topics with a high impact on society increasingly address the necessity of establishing a diverse workforce to confront the challenges of tomorrow. Characterized by complex management structures as well as hierarchies, research associations have not been a subject of investigation until now. For this reason, the presented research project aims to develop a diversity and innovation management strategy with the ultimate goal of inducing change in the corporate culture. The proposed approach consisted of six phases; the first two phases investigated the status quo of diversity in the existing organizational structures of member institutes and the variety of particular working cultures within the research association. The third and the fourth phases utilized qualitative and quantitative studies. The third phase focused on the connection of management level to diversity and innovation, and the need for diversity and innovation management, and tailor-made methods of implementing them. The first three phases have been accomplished successfully; preliminary results are already available. The fourth phase will mainly focus on exploring the mind-set of the employees. The fifth phase will consolidate the findings in the first four phases into an implementable strategy. The final phase will address the implementation of this strategy into the organization. Phases 4 to 6 have not yet been undertaken
KW  - diversity management
KW  - innovation management
KW  - research association
KW  - change management
KW  - engineering
Y1  - 2017
SN  - 1757-5877
VL  - 5
IS  - 2
SP  - 49
EP  - 72
ER  - 
TY  - JOUR
A1  - Gamella, Maria
A1  - Zakharchenko, Andrey
A1  - Guz, Nataliia
A1  - Masi, Madeline
A1  - Minko, Sergiy
A1  - Kolpashchikov, Dmitry M.
A1  - Iken, Heiko
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
T1  - DNA computing system activated by electrochemically triggered DNA realease from a polymer-brush-modified electrode array
JF  - Electroanalysis
N2  - An array of four independently wired indium tin oxide (ITO) electrodes was used for electrochemically stimulated DNA release and activation of DNA-based Identity, AND and XOR logic gates. Single-stranded DNA molecules were loaded on the mixed poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA)/poly(methacrylic acid) (PMAA) brush covalently attached to the ITO electrodes. The DNA deposition was performed at pH 5.0 when the polymer brush is positively charged due to protonation of tertiary amino groups in PDMAEMA, thus resulting in electrostatic attraction of the negatively charged DNA. By applying electrolysis at −1.0 V(vs. Ag/AgCl reference) electrochemical oxygen reduction resulted in the consumption of hydrogen ions and local pH increase near the electrode surface. The process resulted in recharging the polymer brush to the negative state due to dissociation of carboxylic groups of PMAA, thus repulsing the negatively charged DNA and releasing it from the electrode surface. The DNA release was performed in various combinations from different electrodes in the array assembly. The released DNA operated as input signals for activation of the Boolean logic gates. The developed system represents a step forward in DNA computing, combining for the first time DNA chemical processes with electronic input signals.
Y1  - 2017
U6  - http://dx.doi.org/10.1002/elan.201600389
SN  - 1521-4109
VL  - 29
IS  - 2
SP  - 398
EP  - 408
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Suryoputri, Nathania
A1  - Ghaderi, Aydin
A1  - Linder, Peter
A1  - Kotliar, Konstantin
A1  - Göttler, Jens
A1  - Sorg, Christian
A1  - Grimmer, Timo
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Does hemodynamic response function change in Alzheimer disease?
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 92
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Czarnecki, Christian
A1  - Dietze, Christian
ED  - Maedche, Alexander
ED  - vom Brocke, Jan
ED  - Hevner, Alan
T1  - Domain-Specific reference modeling in the telecommunications industry
T2  - DESRIST 2017: Designing the Digital Transformation
N2  - The telecommunications industry is currently going through a major transformation. In this context, the enhanced Telecom Operations Map (eTOM) is a domain-specific process reference model that is offered by the industry organization TM Forum. In practice, eTOM is well accepted and confirmed as de facto standard. It provides process definitions and process flows on different levels of detail. This article discusses the reference modeling of eTOM, i.e., the design, the resulting artifact, and its evaluation based on three project cases. The application of eTOM in three projects illustrates the design approach and concrete models on strategic and operational levels. The article follows the Design Science Research (DSR) paradigm. It contributes with concrete design artifacts to the transformational needs of the telecommunications industry and offers lessons-learned from a general DSR perspective.
KW  - enhanced Telecom Operations Map (eTOM)
KW  - Process reference model
KW  - Process design
KW  - Map (eTOM) Process reference model Process design Telecommunications industry
Y1  - 2017
SN  - 978-3-319-59144-5
SN  - 978-3-319-59143-8
U6  - http://dx.doi.org/10.1007/978-3-319-59144-5_19
N1  - Designing the Digital Transformation 12th International Conference, DESRIST 2017, Karlsruhe, Germany, May 30 - June 1, 2017.
SP  - 313
EP  - 329
PB  - Springer
CY  - Cham
ER  - 
TY  - GEN
A1  - Olbertz, Klaus
T1  - Doppelte Abfindung für Arbeitnehmer: Abfindung gemäß § 1 a KSchG und Abfindung gemäß Sozialplan
T2  - Gesellschafts- und Wirtschaftsrecht : GWR
Y1  - 2018
SN  - 1868-1816
N1  - Anm. zu BAG: Entscheidungsbesprechung zum Urteil v. 19.07.2016 - 2 AZR 536/15
SP  - 62
EP  - 62
ER  - 
TY  - JOUR
A1  - Karnatak, Rajat
A1  - Kantz, Holger
A1  - Bialonski, Stephan
T1  - Early warning signal for interior crises in excitable systems
JF  - Physical Review E
Y1  - 2017
U6  - http://dx.doi.org/10.1103/PhysRevE.96.042211
SN  - 2470-0053
VL  - 96
IS  - 4
SP  - 042211
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Echtzeit-Ethernet - Basis für Industrie 4.0
JF  - Design & Elektronik
Y1  - 2017
SN  - 0933-8667
N1  - Echtzeit für Industrie 4.0. - Teil 1
IS  - 12
SP  - 38
EP  - 41
PB  - WEKA-Fachmedien
CY  - Haar, München
ER  - 
TY  - CHAP
A1  - Thurn, Laura
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Kessler, Julia
T1  - Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab
T2  - Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
Y1  - 2017
U6  - http://dx.doi.org/10.1051/matecconf/201713702013
SN  - 2261-236X
N1  - MATEC Web Conf.
Volume 137, 2017
Matec Web of Conferences., 137(2017)02013
ER  - 
TY  - JOUR
A1  - Arreola, Julio
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Effect of O2 plasma on properties of electrolyte-insulator-semiconductor structures
JF  - physica status solidi a : applications and materials sciences
N2  - Prior to immobilization of biomolecules or cells onto biosensor surfaces, the surface must be physically or chemically activated for further functionalization. Organosilanes are a versatile option as they facilitate the immobilization through their terminal groups and also display self-assembly. Incorporating hydroxyl groups is one of the important methods for primary immobilization. This can be done, for example, with oxygen plasma treatment. However, this treatment can affect the performance of the biosensors and this effect is not quite well understood for surface functionalization. In this work, the effect of O2 plasma treatment on EIS sensors was investigated by means of electrochemical characterizations: capacitance–voltage (C–V) and constant capacitance (ConCap) measurements. After O2 plasma treatment, the potential of the EIS sensor dramatically shifts to a more negative value. This was successfully reset by using an annealing process.
KW  - surface functionalization
KW  - O2 plasma
KW  - hydroxylation
KW  - electrolyte-insulator semiconductor sensor (EIS)
KW  - annealing
Y1  - 2017
U6  - http://dx.doi.org/10.1002/pssa.201700025
SN  - 1862-6319
VL  - 214
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Schlemmer, Katharina
A1  - Porst, Dariusz
A1  - Bassam, Rasha
A1  - Artmann, Gerhard
A1  - Digel, Ilya
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Effects of nitric oxide (NO) and ATP on red blood cell phenotype and deformability
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 100
EP  - 101
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Kroll-Ludwigs, Kathrin
ED  - Erman, Walter
ED  - Grunewald, Barbara
ED  - Maier-Reimer, Georg
T1  - Einleitung vor § 1297
T2  - Bürgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG
Y1  - 2018
SN  - 978-3-504-47103-3
SP  - 4415
EP  - 4422
PB  - Verlag Dr. Otto Schmidt
CY  - Köln
ET  - 15., neu bearbeitete Auflage
ER  - 
TY  - JOUR
A1  - Peterson, Leif Arne
A1  - Röth, Thilo
A1  - Uibel, Thomas
T1  - Einsatz von Holzwerkstoffen in Fahrzeugstrukturen
JF  - Bauen mit Holz
Y1  - 2017
SN  - 0005-6545
N1  - gedruckt in der Bereichsbibliothek Bayernallee
IS  - 3
SP  - 32
EP  - 38
PB  - Bruderverlag
CY  - Köln
ER  - 
TY  - JOUR
A1  - Pfaff, Raphael
T1  - Einsatz von offenen Onlinekursen in der Eisenbahnlehre
JF  - Deine Bahn
N2  - Eigene positive Erfahrungen mit Onlinekursen sowie die geringen Studierendenzahlen in der Präsenzlehre gaben den Anstoß zu einem Experiment mit einem offenen Onlinekurs auf der Plattform Udemy. Die Erfahrungen sowohl bei der Erstellung und als auch im Lehrbetrieb waren positiv und führten zu einer neuen Beschäftigung mit Inhalten und Lernenden, getrieben durch die Anforderungen der Lernplattform.
Y1  - 2017
SN  - 0948-7263
IS  - 1
SP  - 12
EP  - 16
PB  - Bahn-Fachverlag
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Honarvarfard, Elham
A1  - Gamella, Maria
A1  - Channaveerappa, Devika
A1  - Darie, Costel C.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
T1  - Electrochemically Stimulated Insulin Release from a Modified Graphene–functionalized Carbon Fiber Electrode
JF  - Electroanalysis
N2  - A graphene-functionalized carbon fiber electrode was modified with adsorbed polyethylenimine to introduce amino functionalities and then with trigonelline and 4-carboxyphenylboronic acid covalently bound to the amino groups. The trigonelline species containing quarterized pyridine groups produced positive charge on the electrode surface regardless of the pH value, while the phenylboronic acid species were neutral below pH 8 and negatively charged above pH 9 (note that their pKa=8.4). The total charge on the monolayer-modified electrode was positive at the neutral pH and negative at pH > 9. Note that 4-carboxyphenylboronic acid was attached to the electrode surface in molar excess to trigonelline, thus allowing the negative charge to dominate on the electrode surface at basic pH. Negatively charged fluorescent dye-labeled insulin (insulin-FITC) was loaded on the modified electrode surface at pH 7.0 due to its electrostatic attraction to the positively charged interface. The local pH in close vicinity to the electrode surface was increased to ca. 9–10 due to consumption of H+ ions upon electrochemical reduction of oxygen proceeding at the potential of −1.0 V (vs. Ag/AgCl) applied on the modified electrode. The process resulted in recharging of the electrode surface to the negative value due to the formation of the negative charge on the phenylboronic acid groups, thus resulting in the electrostatic repulsion of insulin-FITC and stimulating its release from the electrode surface. The insulin release was characterized by fluorescence spectroscopy (using the FITC-labeled insulin), by electrochemical measurements on an iridium oxide, IrOx, electrode and by mass spectrometry. The graphene-functionalized carbon fiber electrode demonstrated significant advantages in the signal-stimulated insulin release comparing with the carbon fiber electrode without the graphene species.
Y1  - 2017
U6  - http://dx.doi.org/10.1002/elan.201700095
SN  - 1521-4109
VL  - 29
IS  - 6
SP  - 1543
EP  - 1553
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Albanna, Walid
A1  - Lueke, Jan Niklas
A1  - Sjapic, Volha
A1  - Kotliar, Konstantin
A1  - Hescheler, Jürgen
A1  - Clusmann, Hans
A1  - Sjapic, Sergej
A1  - Alpdogan, Serdan
A1  - Schneider, Toni
A1  - Schubert, Gerrit Alexander
A1  - Neumaier, Felix
T1  - Electroretinographic Assessment of Inner Retinal Signaling in the Isolated and Superfused Murine Retina
JF  - Current Eye Research
Y1  - 2017
U6  - http://dx.doi.org/10.1080/02713683.2017.1339807
SN  - 1460-2202
IS  - Article in press
SP  - 1
EP  - 9
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - BOOK
A1  - Mühl, Thomas
T1  - Elektrische Messtechnik : Grundlagen, Messverfahren, Anwendungen
Y1  - 2017
SN  - 978-3-658-15719-7
U6  - http://dx.doi.org/10.1007/978-3-658-15720-3
N1  - Signatur: 21 XXA 15(5)
PB  - Springer Vieweg
CY  - Wiesbaden
ET  - 5., überarbeitete und erweiterte Auflage
ER  - 
TY  - JOUR
A1  - Kerpen, Nils B.
A1  - Bung, Daniel B.
A1  - Valero, Daniel
A1  - Schlurmann, Torsten
T1  - Energy dissipation within the wave run-up at stepped revetments
JF  - Journal of Ocean University of China
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s11802-017-3355-z
SN  - 1993-5021
VL  - 16
IS  - 4
SP  - 649
EP  - 654
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Bosse, Elke
A1  - Mergner, Julia
A1  - Jänsch, Vanessa
T1  - Entwicklung studienrelevanter Kompetenzen im Zusammenspiel mit Studieneinstiegsangeboten
T2  - KoBF-Auswertungsworkshop 31.05.-01.06.2017
Y1  - 2017
ER  - 
TY  - JOUR
A1  - Katz, Evgeny
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Enzyme-based logic gates and circuits - analytical applications and interfacing with electronics
JF  - Analytical and Bioanalytical Chemistry
N2  - The paper is an overview of enzyme-based logic gates and their short circuits, with specific examples of Boolean AND and OR gates, and concatenated logic gates composed of multi-step enzyme-biocatalyzed reactions. Noise formation in the biocatalytic reactions and its decrease by adding a “filter” system, converting convex to sigmoid response function, are discussed. Despite the fact that the enzyme-based logic gates are primarily considered as components of future biomolecular computing systems, their biosensing applications are promising for immediate practical use. Analytical use of the enzyme logic systems in biomedical and forensic applications is discussed and exemplified with the logic analysis of biomarkers of various injuries, e.g., liver injury, and with analysis of biomarkers characteristic of different ethnicity found in blood samples on a crime scene. Interfacing of enzyme logic systems with modified electrodes and semiconductor devices is discussed, giving particular attention to the interfaces functionalized with signal-responsive materials. Future perspectives in the design of the biomolecular logic systems and their applications are discussed in the conclusion.
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s00216-016-0079-7
SN  - 1618-2650
VL  - 409
SP  - 81
EP  - 94
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Hebel, Christoph
T1  - Erfahrungen mit der RIN und aktuelle Weiterentwicklungen
JF  - Straßenverkehrstechnik: Organ der Forschungsgesellschaft für Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der Österreichischen Forschungsgesellschaft Straße und Verkehr; Zeitschrift für Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik
Y1  - 2017
SN  - 0039-2219
N1  - gedruckt in der Bereichsbibliothek Bayernallee vorhanden
VL  - 61
IS  - 7
SP  - 443
EP  - 448
PB  - Kirschbaum-Verlag
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Knutzen, S.
ED  - Mai, Andreas
T1  - Erfolgsstrategien für organisationales Lernen
T2  - Hochschulwege 2015 : Wie verändern Projekte die Hochschulen? ; Dokumentation der Tagung in Weimar im März 2015
Y1  - 2017
SN  - 978-3-7439-1763-7
SP  - 91
EP  - 108
PB  - tredition
CY  - Hamburg
ER  - 
TY  - CHAP
A1  - Thomé, Tristan Eberhard
A1  - Czarnecki, Christian
A1  - Auth, Gunnar
A1  - Bensberg, Frank
ED  - Barton, Thomas
ED  - Herrmann, Frank
ED  - Meister, Vera G.
ED  - Müller, Christian
ED  - Seel, Christian
T1  - Erweiterung des Referenzprozessmodells eTOM um die Anforderungen des deutschen IT-Sicherheitsgesetzes
T2  - Prozesse, Technologie, Anwendungen, Systeme und Management 2017. Angewandte Forschung in der Wirtschaftsinformatik
N2  - Kritische Infrastrukturen sind primäre Ziele krimineller Hacker. Der Deutsche Bundestag reagierte darauf am 25. Juli 2015 mit einem Gesetz zur Verbesserung der Sicherheit von ITSystemen, dem IT-Sicherheitsgesetz. Dies verlangt von Betreibern kritischer Infrastrukturen, angemessene Mindeststandards für organisatorische und technische Sicherheit zu implementieren, um den Betrieb und die Verfügbarkeit dieser Infrastruktur zu gewährleisten. Telekommunikationsunternehmen sind einerseits von diesem Gesetz in besonderem Maße betroffen und verfügen andererseits mit dem Rahmenwerk enhanced Telecom Operations Map (eTOM) über ein international anerkanntes Referenzmodell zur Gestaltung von Geschäftsprozessen in dieser Branche. Da sämtliche Telekommunikationsunternehmen in Deutschland verpflichtet sind, das Gesetz innerhalb eines bestimmten Zeitrahmens zu implementieren, präsentiert dieser Beitrag einen Vorschlag zur Erweiterung von eTOM um die relevanten Anforderungen des deutschen IT-Sicherheitsgesetzes.
Y1  - 2017
SN  - 978-3-944330-56-3
N1  - Tagungsband zur 30. AKWI-Jahrestagung
vom 17.09.2017 bis 20.09.2017 an der
Hochschule Aschaffenburg
SP  - 51
EP  - 60
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Lind, Thorsten Patric
T1  - Eröffnung des Insolvenzverfahrens. Erfaßtes Vermögen und Verfahrensbeteiligte. Insolvenzverwalter, Organe der Gläubiger : §§ 56-62, 66-72, 74-79
T2  - Insolvenzrecht : Kommentar / hrsg. von Martin Ahrens; Markus Gehrlein; Andreas Ringstmeier . - 3. Auflage
Y1  - 2017
SN  - 978-3-472-08669-7
N1  - Früher unter dem Titel: Fachanwaltskommentar Insolvenzrecht
SP  - 690 - 752; 776 - 797; 802 - 818
PB  - Luchterhand
CY  - Köln
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Hendrick, P.
T1  - Experimental Evaluation of the Pollutant and Noise Emissions of the GTCP 36-300 Gas Turbine Operated with Kerosene and a Low NOX Micromix Hydrogen Combustor
T2  - 7th European Conference for Aeronautics and Space Sciences, EUCASS 2017
Y1  - 2017
U6  - http://dx.doi.org/10.13009/EUCASS2017-125
ER  - 
TY  - CHAP
A1  - Birkl, Josef
A1  - Diendorfer, Gerhard
A1  - Kern, Alexander
A1  - Thern, Stephan
T1  - Extrem hohe Blitzströme
T1  - Extremly high lightning currents
T2  - 12. VDE/ABB-Blitzschutztagung : Beiträge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg
Y1  - 2017
SN  - 978-3-8007-4459-6
SP  - 146
EP  - 152
ER  - 
TY  - JOUR
A1  - Kilic, S. A.
A1  - Raatschen, Hans-Jürgen
A1  - Körfgen, B.
A1  - Apaydin, N. M.
A1  - Astaneh-Asl, A.
T1  - FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements
JF  - Arabian Journal for Science and Engineering
N2  - This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5 % of the total mass. They were in a frequency range up to 1.2 Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach.
KW  - Suspension bridge
KW  - 3D nonlinear finite element model
KW  - Thin shell finite elements
KW  - Natural frequency
KW  - Effective modal mass
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s13369-016-2316-y
SN  - 2191-4281
VL  - 42
IS  - 3
SP  - 1103
EP  - 1116
PB  - Springer Nature
ER  - 
TY  - JOUR
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Oberländer, Jan
A1  - Kremers, Alexander
A1  - Wagner, Torsten
A1  - Wagner, Patrick H.
A1  - Schöning, Michael Josef
T1  - FEM-based modeling of a calorimetric gas sensor for hydrogen peroxide monitoring
JF  - physica status solidi a : applications and materials sciences
N2  - A physically coupled finite element method (FEM) model is developed to study the response behavior of a calorimetric gas sensor. The modeled sensor serves as a monitoring device of the concentration of gaseous hydrogen peroxide (H2 O2) in a high temperature mixture stream in aseptic sterilization processes. The principle of operation of a calorimetric H2 O2 sensor is analyzed and the results of the numerical model have been validated by using previously published sensor experiments. The deviation in the results between the FEM model and experimental data are presented and discussed.
Y1  - 2017
U6  - http://dx.doi.org/10.1002/pssa.201600912
SN  - 1862-6319
IS  - Early View
PB  - Wiley-VCH
CY  - Weinheim
ER  -