TY - JOUR
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
A1 - Feldmann, Martin
A1 - Pak, Daniel
A1 - Geßler, Achim
T1 - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts
JF - Cement and concrete composites
Y1 - 2008
SN - 0958-9465
VL - Vol. 30
IS - iss. 2
SP - 82
EP - 87
ER -
TY - JOUR
A1 - Reisgen, Uwe
A1 - Schleser, Markus
A1 - Feldmann, Martin
A1 - Pak, Daniel
A1 - Geßler, Achim
T1 - Kleben dünnwandiger Bauteile aus textilbewehrtem Beton
JF - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1 - 2008
SN - 0036-7184
VL - Bd. 60
IS - H. 7/8
SP - 408
EP - 412
ER -
TY - BOOK
A1 - Schleser, Markus
T1 - Einsatz polymerimprägnierter, alkaliresistenter Glastextilien zur Bewehrung zementgebundener Matrices. (Aachener Berichte Fügetechnik ; Bd. 6)
Y1 - 2008
SN - 978-3-8322-7696-6
N1 - Zugl.: Aachen, Techn. Hochsch., Diss., 2008
PB - Shaker
CY - Aachen
ER -
TY - CHAP
A1 - Seiler, Friedrich
A1 - Pichler, Alexander
A1 - Pfaff, Raphael
A1 - George, Alfred
A1 - Srulijes, Julio
T1 - Improved Doppler picture velocimetry and new automated processing
T2 - 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008
Y1 - 2008
SP - 1
EP - 12
ER -
TY - CHAP
A1 - Pfaff, Raphael
A1 - Burnham, Keith J.
T1 - On abstraction and interpretability: a behavioural perspective
T2 - 19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada
Y1 - 2008
SN - 978-0-7695-3331-5 ; 978-0-7695-2719-2
SP - 89
EP - 94
PB - IEEE
CY - Piscataway, NJ
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung ; [wireless technologies, 10. Kongress, 23. - 24. September 2008, Bochum] / Hrsg. Jörg F. Wollert
Y1 - 2008
SN - 978-3-89838-608-1
PB - AKA
CY - Heidelberg
ER -
TY - CHAP
A1 - Röhrig, Christof
A1 - Großmann, Uwe
A1 - Künemund, Frank
A1 - Gansemer, Sebastian
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - Positionsbestimmung mittels Funktechnologien - Vergleich von Verfahren und Technologien mit exemplarischer Demonstration
T2 - Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. Jörg F. Wollert
Y1 - 2008
SN - 978-3-89838-608-1
SP - 337
EP - 348
PB - AKA
CY - Heidelberg
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Technologischer Überblick - welches ist die richtige kabellose Technologie? Grenzen und Möglichkeiten der Funkübertragung sowie der konkreten Nutzung verschiedener Technolgien
T2 - Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. Jörg F. Wollert
Y1 - 2008
SN - 978-3-89838-608-1
SP - 349
PB - AKA
CY - Heidelberg
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - IT ins Auto! IP im Ethernet und der USB können im Kfz gut genutzt werden
JF - Elektronik automotive : Magazin für Entwicklungen in der Kfz-Elektronik und Telematik
Y1 - 2008
SN - 1614-0125
IS - H. 9
SP - 46
EP - 51
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Wollert, Jörg
T1 - Kompensation von Fading und Koexistenzproblemen in IEEE 802.15.4 Netzwerken durch Diversität : die Kombination macht's möglich
T2 - Automation 2008: Lösungen für die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)
Y1 - 2008
SN - 978-3-18-092032-0
SP - 139
EP - 142
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - Ortsbezogene Fernwartungsdienste mit Bluetooth Ranging und Java Micro Edition
T2 - Automation 2008: Lösungen für die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)
Y1 - 2008
SN - 978-3-18-092032-0
SP - 353
EP - 356
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - Location based Services in der Gebäudeautomation
T2 - Wireless Technologies Kongress 2008: von der Technologie zur Anwendung ; [10. Kongress, 23. - 24. September 2008, Bochum]
Y1 - 2008
SN - 978-3-89838-608-1
SP - 313
EP - 322
PB - Aka
CY - Heidelberg
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - A middleware approach for industrial wireless automation networks
T2 - Proceedings of the Eighth IASTED International Conference on Wireless & Optical Communications : May 26 - 28, 2008, Québec City, Quebec, Canada
Y1 - 2008
SN - 978-0-88986-743-7
SP - 76
EP - 82
PB - Acta Pr.
CY - Anaheim, Calif.
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Buda, Aurel
A1 - Wollert, Jörg
T1 - XML-based Middleware approach for industrial wireless communication systems
T2 - IEEE International Conference on Emerging Technologies and Factory Automation, 2008 : ETFA 2008 ; 15 - 18 Sept., 2008, Hamburg, Germany
Y1 - 2008
SN - 978-1-4244-1505-2
U6 - http://dx.doi.org/10.1109/ETFA.2008.4638463
SP - 632
EP - 639
PB - IEEE
CY - Piscataway, NJ
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - Automatische Generierung von Automatisierungsobjekten nach IEC 61131-3 zur einfachen Integration von Funkkomponenten in übergeordnete Steuerungssysteme
T2 - Wireless automation : funkgestützte Kommunikation in der industriellen Automatisierungstechnik ; Tagung Berlin, 28. und 29. Februar 2008. (VDI-Berichte ; 2010)
Y1 - 2008
SN - 978-3-18-092010-8 ; 3-18-092010-8
SP - 75
EP - 84
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Performanceanforderungen von Funkstrecken in der Prozess- und Fertigungsautomation
T2 - Automation 2008: Lösungen für die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)
Y1 - 2008
SN - 978-3-18-092032-0
SP - 247
EP - 248
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - RPRT
A1 - Wollert, Jörg
T1 - DANA - Dynamische Ad-hoc Netzwerke in der Automatisierungstechnik. Schlussbericht. Laufzeit: 01.09.2004 - 30.06.2008 (BMBF-Forschungsbericht; Förderkennzeichen 1714X04)
Y1 - 2008
PB - BMBF
CY - Berlin
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Bluetooth in der Klemme
JF - Computer & Automation : Fachmedium der Automatisierungstechnik
Y1 - 2008
SN - 1615-8512
IS - H. 10
SP - 62
EP - 67
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Bluetooth: Funk für alle(s)? : 10 Jahre Bluetooth: ein Technologie-Über- und -Ausblick
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme
Y1 - 2008
IS - Okt.
SP - 36
EP - 43
ER -
TY - JOUR
A1 - Kämper, Klaus-Peter
A1 - Picard, Antoni
A1 - Schütze, Andreas
T1 - Können Studierende einen piezoresistiven Drucksensor in einer Woche selbständig fertigen?
JF - Interesse wecken, Motivation steigern, Praxisorientiert ausbilden : Nachwuchsförderung und innovative Ausbildung in Sensorik und Mikrosystemtechnik : [anläßlich der Sondersession auf der Sensor+Test 2007]
Y1 - 2007
SN - 978-3-89750-148-5
N1 - Verlinkt ist der ganze Band.
SP - 26
EP - 35
PB - AWNET
CY - Berlin
ER -
TY - BOOK
A1 - Gebhardt, Andreas
T1 - Generative Fertigungsverfahren - Rapid Prototyping - Rapid Tooling - Rapid Manufacturing, 3. Aufl.
Y1 - 2007
SN - 978-3-446-22666-1
N1 - 2. Aufl. u.d.T.: Gebhardt, Andreas: Rapid Prototyping
PB - Hanser
CY - München
ET - 3
ER -
TY - JOUR
A1 - Kallweit, Stephan
A1 - Dues, Michael
A1 - Müller, Ulli
A1 - Lederer, Thomas
T1 - Einsatz der Particle Image Velocimetry zur Untersuchung von Rohrströmungen / Kallweit, Stephan ; Dues, Michael ; Müller, Ulli ; Lederer, Thomas ; Schroll, Michael ; Willert, Christian
JF - Lasermethoden in der Strömungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....
Y1 - 2007
SN - 978-3-86009-007-7
N1 - Deutsche Gesellschaft für Laser-Anemometrie ; Fachtagung Lasermethoden in der Strömungsmesstechnik <15, 2007, Rostock>
SP - 35
ER -
TY - JOUR
A1 - Kallweit, Stephan
A1 - Kaminsky, R.
A1 - Canneyt, C. van
A1 - Eloot, S.
T1 - High-Speed und Stereo-PIV in einem künstlichen Blutgefäß / Kallweit, S. ; Kaminsky, R. ; Canneyt, C. van ; Eloot, S.
JF - Lasermethoden in der Strömungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....
Y1 - 2007
SN - 978-3-86009-007-7
N1 - Deutsche Gesellschaft für Laser-Anemometrie ; Fachtagung Lasermethoden in der Strömungsmesstechnik <15, 2007, Rostock>
SP - 48
ER -
TY - JOUR
A1 - Kallweit, Stephan
A1 - Vanlanduit, S.
A1 - Vanherzeele, J.
A1 - Brouns, M.
T1 - Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.
JF - PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007
Y1 - 2007
N1 - PIV, Internional Symposium on Particle Image Velocimetry, 7 ; Datei: Vanlanduit.pdf
SP - 1
EP - 14
ER -
TY - JOUR
A1 - Henn, Gudrun
A1 - Polaczek, Christa
T1 - Studienerfolg in den Ingenieurwissenschaften
JF - Das Hochschulwesen : HSW ; Forum für Hochschulforschung, -praxis und -politik
Y1 - 2007
SN - 0018-2974
VL - 55
IS - 5
SP - 144
EP - 147
ER -
TY - CHAP
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
A1 - Chudoba, Rostislav
A1 - Konrad, Martin
ED - Triantafillou, T. C.
T1 - Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics
T2 - Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007
Y1 - 2007
SN - 9608969107
SP - 456
EP - 457
PB - Univ.
CY - Patras
ER -
TY - CHAP
A1 - Schleser, Markus
A1 - Dilthey, Ulrich
A1 - Mund, F.
A1 - Böhm, Stefan
ED - Czarnecki, Lech
ED - Garbacz, Andrzej
T1 - Improvement of textile reinforced concrete by use of polymers
T2 - Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)
Y1 - 2007
SN - 978-3-931681-89-0
SP - 153
EP - 162
PB - Aedificatio Publ.
CY - Freiburg
ER -
TY - CHAP
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
A1 - Hegger, Josef
A1 - Voss, Stefan
ED - Reinhardt, Hans W.
T1 - Load-bearing behaviour of polymer-impregnated textiles in concrete
T2 - Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)
Y1 - 2007
SN - 978-2-35158-046-2
SP - 183
EP - 192
PB - RILEM Publ.
CY - Bagneux
ER -
TY - CHAP
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
A1 - Puterman, Moshe
T1 - Investigation and improvement of concrete reinforced with epoxy impregnated fabrics
T2 - Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007
Y1 - 2007
SN - 978-89-9600450-9
SP - 725
EP - 733
PB - Kangwoon National Univ.
CY - Chancheon
ER -
TY - THES
A1 - Pfaff, Raphael
T1 - Automated processing of the ISL Doppler images
Y1 - 2007
N1 - Hagen, Fernuniv., Bachelorarbeit, 2007
ER -
TY - CHAP
A1 - Pfaff, Raphael
A1 - Pichler, Alexander
A1 - George, Alfred
A1 - Seiler, Friedrich
T1 - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007
T2 - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620
Y1 - 2007
SP - 1
EP - 10
PB - ISL
CY - Saint Louis, France
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Wireless-Technologies-Kongress 2007 : von der Technologie zur Anwendung ; [wireless technologies, 9. Kongress, 18. - 19. September 2007, Stuttgart] / Hrsg. Jörg F. Wollert
Y1 - 2007
SN - 978-3-89838-084-3
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - GEN
A1 - Kämper, Klaus-Peter
T1 - Skript zur Vorlesung Mikrotechnik 1
N2 - Kennwortgeschützter Zugang nur für Studierende bei Prof. Dr. Klaus-Peter Kämper. Sommersemester 2007. Version 2.3 vom 27.02.2007 I-8, 484 S.: Ill.; graph. Darst. Inhaltsverzeichnis: 1 Einführung: Was ist Mikrotechnik? 2 Fertigung im Reinraum 3 Der Werkstoff Silizium 4 Dünnschichttechnologie 5 Photolithographie 6 Ätztechnologie 7 „Bulk Micromachining“ 8 „Surface Micromachining“ 9 Trockenätzen tiefer Mikrostrukturen 10 LIGA-Technik 11 Mikrofunkenerosion 12 Laser in der Mikrotechnik 13 Mechanische Mikrofertigung 14 Photostruktuierbares Glas 15 Aufbau- und Verbindungstechnik
KW - Mikrosystemtechnik
Y1 - 2007
ER -
TY - GEN
A1 - Kämper, Klaus-Peter
T1 - Lecture notes Sensors and Actuators
N2 - Kennwortgeschützter Zugang nur für Studierende bei Prof. Dr. Klaus-Peter Kämper. Wintersemester 2007/2008. Version vom 30.08.2007. 472 Seiten (pdf-Format)
N2 - Password necessarily. Access only for Students by Prof. Dr. Klaus-Peter Kämper. Winter semester 2007/2008. Version 2007-08-30. 472 pages (pdf) Contents 1. Introduction 2. Introduction to Sensors 3. Introduction to Microfabrication 4. Pressure Sensors 5. Acceleration Sensors 6. Angular Rate Sensors 7. Position Sensors 8. Flow Sensors 9. Piezoelectric Actuators 10. Magnetostrictive Actuators 11. Actuators based on Shape Memory Alloys 12. Actuators based on Electrorheological Fluids 13. Actuators based on Magnetorheological Fluids
KW - Sensor
KW - Aktor
KW - Sensoren
KW - Aktoren
KW - Sensores
KW - Actuators
KW - Microfabrication
Y1 - 2007
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Mobility - Integration von Offboard-Devices in Fahrzeugen
T2 - Begleittexte zum Entwicklerforum Kfz-Elektronik & FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...
Y1 - 2007
SP - 47
EP - 54
PB - Design & Elektronik
CY - Poing
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Fahrzeug-Umwelt Kommunikation? Chancen und Herausforderungen
T2 - Begleittexte zum Entwicklerforum Kfz-Elektronik & FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...
Y1 - 2007
SP - 39
EP - 46
PB - Design & Elektronik
CY - Poing
ER -
TY - CHAP
A1 - Vedral, Andreas
A1 - Kruse, Thomas
A1 - Wollert, Jörg
T1 - Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4
T2 - 12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece
Y1 - 2007
SN - 1424408261 ; 9781424408269
U6 - http://dx.doi.org/10.1109/EFTA.2007.4416769
SP - 177
EP - 186
PB - IEEE
CY - Piscataway, NJ
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - UWB, ZigBee und Z-Wave in der Automatisierung : neue Konkurrenzsituation bei Short Range Wireless?
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1 - 2007
SN - 0013-5658
N1 - Printausgabe in der Bibliothek vorhanden: 23 Z 133; 63 ZS 035
VL - Bd. 56
IS - H. 2
SP - 62
EP - 65
ER -
TY - JOUR
A1 - Wollert, Jörg
A1 - Kruse, Thomas
A1 - Vedral, Andreas
T1 - Die Kraft der drei Antennen : zuverlässige Funkkommunikation für die Automatisierungstechnik
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme
Y1 - 2007
SN - 0013-5658; 1611-5120
N1 - Printausgabe in der Bibliothek vorhanden: 23 Z 133; 63 ZS 035
VL - 56
IS - Sonderh. 2
SP - 36
EP - 42
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Funk für die Sicherheit auf vier Rädern : Chancen und Herausforderungen in der Fahrzeug-Umwelt-Kommunikation
JF - Elektronik automotive : Magazin für Entwicklungen in der Kfz-Elektronik und Telematik
Y1 - 2007
SN - 1614-0125
IS - H. 8
SP - 78
EP - 83
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Vredal, Andreas
A1 - Wollert, Jörg
ED - Wollert, Jörg
T1 - Einfache Integration von funkgestützten Kommunikationssystemen in der Automation
T2 - Wireless Technologies : 9. Kongress, 18. - 19. September 2007, Stuttgart ; von der Technologie zur Anwendung
Y1 - 2007
SN - 978-3-89838-084-3
SP - 189
EP - 198
PB - Aka
CY - Berlin
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Wireless in industriellen Anwendungen
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Scout : Leitfaden für Elektronik-Entwickler
Y1 - 2007
SN - 1863-3420
SP - 40
EP - 46
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Jozenfini, B.
A1 - Wollert, Jörg
T1 - Mobile ad-hoc Network for home automation based on ZigBee application framework
T2 - 1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany
Y1 - 2007
SP - 1
EP - 5
PB - Design & Elektronik
CY - Poing
ER -
TY - JOUR
A1 - Kämper, Klaus-Peter
A1 - Picard, A.
A1 - Schütze, A.
A1 - Wallach, D.
T1 - Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; Kämper, K.-P.; Schütze, A.; Wallach, D.; Walter, T.
JF - Mst-News (2006)
Y1 - 2006
SN - 0948-3128
SP - 15, 16
EP - u. 35
ER -
TY - BOOK
A1 - Mautner, Karin
T1 - Numerical treatment of the Black-Scholes variational inequality in computational finance
Y1 - 2006
N1 - Humboldt-Univ., Diss
CY - Berlin
ER -
TY - JOUR
A1 - Enning, Manfred
T1 - Flexcargorail - ein Fahrzeugsystem für effizienten Einzelwagenverkehr / Baier, Martin ; Enning, Manfred
JF - Logistik Management. 8 (2006), H. 3
Y1 - 2006
SN - 1436-6231
SP - 28
EP - 42
ER -
TY - JOUR
A1 - Enning, Manfred
A1 - Stützle, Thorsten
A1 - Viereck, Uwe
A1 - Stribersky, Anton
T1 - Creepage control for use in wheelslide protection systems / Stützle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk
JF - Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control
Y1 - 2006
SN - 0742-5953
ER -
TY - JOUR
A1 - Enning, Manfred
A1 - Stützle, Thorsten
A1 - Viereck, Uwe
A1 - Stribersky, Anton
T1 - Adaptiver Gleitschutz für Schienenfahrzeuge (Adaptive Wheelslide Protection System for Railway Vehicles) / Stützle, Thorsten ; Viereck, Uwe ; Enning, Manfred ; Stribersky, Anton ; Rulka, Wolfgang
JF - at - Automatisierungstechnik . 54 (2006), H. 3
Y1 - 2006
SN - 0178-2312
SP - 139
EP - 148
ER -
TY - JOUR
A1 - Enning, Manfred
A1 - Abel, D.
A1 - Bollig, A.
T1 - Modellfabrik macht Automatisierungstechnik erlebbar / Abel, D. ; Bollig, A. ; Enning, M.
JF - RWTH-Themen (2006)
Y1 - 2006
SN - 0179-079X
SP - 12
EP - 14
ER -
TY - JOUR
A1 - Enning, Manfred
A1 - Stützle, T.
A1 - Viereck, U.
T1 - Adaptiver Gleitschutz für Schienenfahrzeuge / Stützle, T. ; Viereck, U. ; Enning, M. ; Rulka, W. ; Stribersky, A. ; Abel, D.
JF - Innovations for Europe : VDE-Kongress 2006, 23. - 25. Oktober 2006 in Aachen / Tagungsleiter: W. Schröppel
Y1 - 2006
SN - 3-8007-2979-2
SP - 401
EP - 406
PB - VDE-Verl.
CY - Berlin
ER -
TY - CHAP
A1 - Raupach, Michael
A1 - Orlowsky, Jeannette
A1 - Büttner, T.
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
ED - Hegger, Josef
T1 - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2 - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1 - 2006
SN - 2-912143-97-7
SP - 77
EP - 88
PB - RILEM Publ.
CY - Bagneux
ER -
TY - CHAP
A1 - Pak, Daniel
A1 - Piegeler, D.
A1 - Feldmann, Markus
A1 - Schleser, Markus
A1 - Dilthey, Ulrich
ED - Hegger, Josef
T1 - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2 - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1 - 2006
SN - 2-912143-97-7
SP - 181
EP - 190
PB - RILEM Publ.
CY - Bagneux
ER -
TY - CHAP
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
ED - Barroso de Aguiar, Jose
ED - Jalali, Said
ED - Camoes, Aires
ED - Ferrera, Rui Miguel
T1 - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2 - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1 - 2006
SN - 972-99179-1-4
SP - 185
EP - 192
PB - Universidade do Minho, Departamento de Engenharia Civil
CY - Guimarães
ER -
TY - JOUR
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
A1 - Hanisch, Vera
A1 - Gries, Thomas
T1 - Garnzugprüfung polymergetränkter Textilien für die Bewehrung von Beton
JF - Technische Textilien
Y1 - 2006
SN - 0323-3243
VL - 49
IS - 1
SP - 48
EP - 50
ER -
TY - JOUR
A1 - Schleser, Markus
A1 - Walk-Lauffer, Bernd
A1 - Raupach, Michael
A1 - Dilthey, Ulrich
T1 - Application of polymers for textile-reinforced concrete
JF - Journal of materials in civil engineering : properties, applications, durability
Y1 - 2006
SN - 0899-1561
VL - 18
IS - 5
SP - 670
EP - 676
ER -
TY - JOUR
A1 - Feldmann, Markus
A1 - Pak, Daniel
A1 - Geßler, Achim
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
T1 - Bonded connections for textile reinforced concrete structures
JF - Cailiao-gongcheng = Journal of materials engineering
Y1 - 2006
SN - 1001-4381
IS - Special iss.
SP - 123
EP - 127
ER -
TY - CHAP
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
A1 - Möller, M.
A1 - Weichhold, O.
ED - Hegger, Josef
T1 - Application of polymers in textile reinforced concrete : from the interface to construction elements
T2 - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1 - 2006
SN - 2-912143-97-7
SP - 55
EP - 64
PB - RILEM Publ.
CY - Bagneux
ER -
TY - THES
A1 - Pfaff, Raphael
T1 - Modelling of nonlinear systems using piecewise defined models
Y1 - 2006
N1 - Coventry, Univ., Masterarbeit, 2006
ER -
TY - CHAP
A1 - Pfaff, Raphael
A1 - Vinsonneau, B.
A1 - Burnham, K. J.
T1 - Multiple models for nonlinear systems
T2 - Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]
Y1 - 2006
SN - 1-84600-013-0
SP - 347
EP - 352
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Langzeitstatistische Untersuchungen zur Qualität von Funkkanälen für das industrielle Umfeld
T2 - Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund ( Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)
Y1 - 2006
SN - 3-18-377210-8
SP - 165
EP - 176
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Grundlagen Wireless - Was kann von Funktechnik erwartet werden?
T2 - Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)
Y1 - 2006
SN - 3-18-377210-8
SP - 314
EP - 323
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Bussysteme
T2 - Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-Jürgen Gevatter ... (Hrsg.). - 2. Aufl.
Y1 - 2006
SN - 3-540-21207-8 ; 978-3-540-21207-2
SP - 475
EP - 653
PB - Springer
CY - Berlin [u.a.]
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Wireless Technologies : 8. Kongress, 27. - 28. September 2006, Dortmund : von der Technologie zur Anwendung / Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 772)
Y1 - 2006
SN - 3-18-377210-8
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Merten, Sabine
A1 - Conrad, Thorsten
A1 - Kämper, Klaus-Peter
A1 - Picard, Antoni
A1 - Schütze, Andreas
T1 - Virtual Technology Labs - an efficient tool for the preparation of hands-on-MEMS-courses in training foundries
N2 - Hands-on-training in high technology areas is usually limited due to the high cost for lab infrastructure and equipment. One specific example is the field of MEMS, where investment and upkeep of clean rooms with microtechnology equipment is either financed by production or R&D projects greatly reducing the availability for education purposes. For efficient hands-on-courses a MEMS training foundry, currently used jointly by six higher education institutions, was established at FH Kaiserslautern. In a typical one week course, students manufacture a micromachined pressure sensor including all lithography, thin film and packaging steps. This compact and yet complete program is only possible because participants learn to use the different complex machines in advance via a Virtual Training Lab (VTL). In this paper we present the concept of the MEMS training foundry and the VTL preparation together with results from a scientific evaluation of the VTL over the last three years.
KW - Virtuelles Laboratorium
KW - Virtuelles Labor
KW - Hand-on-training
KW - Virtual Technology Lab
KW - MEMS ; education and training foundry
Y1 - 2006
ER -
TY - JOUR
A1 - Gebhardt, Andreas
T1 - Rapid Manufacturing - eine interdisziplinäre Strategie
N2 - Als um 1987 ein Verfahren namens Stereolithographie und ein Stereolithography Apparatus (SLA) vorgestellt wurden, war der Traum von der Herstellung beliebiger dreidimensionaler Bauteile direkt aus Computerdaten und ohne bauteilspezifische Werkzeuge Realität geworden. Ein Anwendungs-Szenario wurde gleich mitgeliefert. Diese Technologie würde es möglich machen, die gesamte Ersatzteilversorgung der Amerikanischen Pazifikflotte mittels ein paar dieser Maschinen, umfangreicher Datenstätze und genügend Rohmaterial vor Ort auf einem Flugzeugträger direkt nach Bedarf zu fertigen. Diese Vorstellung definierte schon damals die direkte digitale Fertigung, das Rapid Manufacturing. In der Realität bestanden die mit diesem Verfahren hergestellten Bauteile nur aus Kunststoff, waren ungenau, bruchempfindlich und klebrig und allein in der Produktentwicklung, eben als Prototypen zu benutzen. Sie waren schnell verfügbar, weil zu Ihrer Herstellung keine Werkzeuge benötigt wurden. Folgerichtige und zudem modern hießen sie: Rapid Prototyping. Rapid Prototyping wurde schnell zum Synonym eines neuen Zweiges der Fertigungstechnik, der Generativen Fertigungstechnik. Die weitere Entwicklung brachte neue Verfahren, höhere Genauigkeiten, verbesserte Werkstoffe und neue Anwendungen. Die Herstellung von Negativen, also Werkzeugen, mit dem gleichen Verfahren wurde marketing-getrieben Rapid Tooling genannt und als die ersten Bauteile nicht mehr als Prototypen, sondern als Endprodukte eingesetzt wurden, nannte man dies Rapid Manufacturing - das Ziel war erreicht. War das Ziel wirklich erreicht? Ist es Rapid Manufacturing, wenn ein generativ gefertigtes Bauteil die gewünschte Spezifikation erreicht? Was muss passieren, damit aus dem Phänomen Rapid Prototyping eine Strategie wird, die geeignet ist, einen Paradigmenwechsel von der heutigen Hersteller-induzierten Massenproduktion von Massenartikeln zur Verbraucher-induzierten (und verantworteten) Massenproduktion von Einzelteilen für jedermann ermöglichen und möglicherweise unsere Arbeits- und Lebensformen tiefgreifend zu beeinflussen? Im Beitrag wird der Begriff der (Fertigungs-) Strategie „Rapid Manufacturing“ näher beleuchtet. Es wird diskutiert, welche Maßnahmen auf der technischen und der operative Ebene getroffen werden müssen, damit die generative Fertigungstechnik im Sinne dieser Strategie umgesetzt werden kann. Beispiele belegen, dass diese Entwicklung bereits begonnen hat und geben Anregungen für eine konstruktive Diskussion auf der RapidTech 2006.
N2 - As a process called stereolithography and a stereolithography apparatus (SLA) was presented in 1987, the dream of manufacturing any three-dimensional component directly from computer data and without component-specific tools became reality. An application scenario was supplied at the same time. This technology would make it possible to produce the entire spare parts requirement of the American Pacific Fleet merely through the use of a couple of such machines, extensive datasets and enough raw material on board an aircraft carrier directly as required. This image defined direct digital fabrication, rapid manufacturing, even at that time. In reality, this procedure only managed to produce components in plastic which were imprecise, fragile and sticky and only usable as prototypes in product development. They were rapidly available, because no tools were required for their manufacture. Consequentially, they are now known as Rapid Prototyping in modern jargon. Rapid Prototyping quickly became a synonym for a new branch of production engineering known as generative production engineering. Continued development brought new processes, improved accuracy, improved materials and new applications. The manufacturing of negatives, in other words tools, using the same procedure was quickly named rapid tooling by the marketing sector, and once the first components were used as final products instead of just prototypes the process was renamed "rapid manufacturing" - the goal had been reached. Was the goal really reached? Is it rapid manufacturing if a generatively manufactured component reaches the required specifications? What has to happen so that the rapid prototyping phenomenon becomes a strategy which is suitable for enabling the paradigm change from current manufacture-induced mass production of mass articles to consumer-induced (and consumer-responsible) mass production of single parts for anyone, and in all possibility makes dramatic changes in our way of working and living? The lecture includes detailed information about the (production) strategy term "rapid manufacturing". We will be discussing which measures need to be taken on the technical and operative level so that generative production engineering can be implemented in the sense of this strategy. Examples will show that this development has already started, and should provoke stimulation leading to constructive discussion during RapidTech 2006.
KW - Rapid prototyping
KW - Rapid Manufacturing
KW - Rapid Prototyping
KW - Stereolithographie
KW - Generative Fertigungstechnik
KW - Rapid prototyping
KW - rapid manufacturing
Y1 - 2006
ER -
TY - CHAP
A1 - Gebhardt, Andreas
T1 - Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006
N2 - Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education – Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education – Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company – Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone – Set up your own business 2.5 Level 5: Grow to be Strong – Develop your business 2.6 Level 6: Competitive and independent – Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion
KW - Technologietransfer
KW - technology transfer
KW - technology diffusion
Y1 - 2006
ER -
TY - JOUR
A1 - Gebhardt, Andreas
T1 - Generative Manufacturing of Ceramic Parts "Vision Rapid Prototyping"
N2 - Table of Contents Introduction 1. Generative Manufacturing Processes 2. Classification of Generative Manufacturing Processes 3. Application of Generative Processes on the Fabrication of Ceramic Parts 3.1 Extrusion 3.2 3D-Printing 3.3 Sintering – Laser Sintering 3.4 Layer-Laminate Processes 3.5 Stereolithography (sometimes written: Stereo Lithography) 4. Layer Milling 5. Conclusion - Vision
KW - Rapid prototyping
KW - Rapid Technologie
KW - Rapid Prototyping
Y1 - 2006
ER -
TY - CHAP
A1 - Vedral, Andreas
A1 - Wollert, Jörg
A1 - Buda, A.
A1 - Altrock, R.
T1 - The capability of bluetooth for real-time transmission in automation
T2 - Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand
Y1 - 2006
SP - 168
EP - 175
PB - Acta Pr.
CY - Anaheim, Calif.
ER -
TY - CHAP
A1 - Vedral, A.
A1 - Wollert, Jörg
T1 - Analysis of error and time behavior of the IEEE 802.15.4 PHY-layer in an industrial environment
T2 - Proceedings / 2006 IEEE International Workshop on Factory Communication Systems : June 28th - 30th, 2006
Y1 - 2006
SN - 1-4244-0379-0
SP - 119
EP - 124
PB - IEEE Operations Center
CY - Piscataway, NJ
ER -
TY - CHAP
A1 - Vredal, Andreas
A1 - Wollert, Jörg
T1 - Praktische Untersuchungen zur Reduzierung der Restfehlerrate von Funksystemen
T2 - Wireless Automation : Chancen, Lösungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)
Y1 - 2006
SN - 3-18-091939-6
SP - 135
EP - 146
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Vedral, Andreas
A1 - Wollert, Jörg
T1 - Die Analyse industrieller funkgestützter Kommunikationskanäle
T2 - Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse & Kongress, 28. - 30. Nov. 2006, Nürnberg
Y1 - 2006
SN - 9783800729944
SP - 279
EP - 288
PB - VDE-Verl.
CY - Berlin
ER -
TY - CHAP
A1 - Vedral, Andreas
A1 - Wollert, Jörg
T1 - Praktische Untersuchungen zum zeitlichen Übertragungs- und Bündelfehlerverhalten der IEEE 802.15.4
T2 - ZigBee & Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, München
Y1 - 2006
PB - Design&Elektronik
CY - Poing
ER -
TY - BOOK
A1 - Engeln-Müllges, Gisela
A1 - Niederdrenk, Klaus
A1 - Wodicka, Reinhard
T1 - Numerik-Algorithmen : Verfahren, Beispiele, Anwendungen. - 9., vollst. überarb. und erw. Aufl.
Y1 - 2005
SN - 3-540-62669-7
PB - Springer
CY - Berlin [u.a.]
ER -
TY - JOUR
A1 - Schmitt, Rolf W.
T1 - Werkstoffe - Oberflächen - Schmierstoffe - Tribologie-Fachtagung 2004 in Göttingen
JF - Erdöl Erdgas Kohle. 121 (2005), H. 1
Y1 - 2005
SN - 0179-3187
SP - 39
EP - 40
ER -
TY - JOUR
A1 - Schmitt, Rolf W.
T1 - Innovationen bei Schmierstoffen und tribologischen Systemen
JF - Stahl und Eisen. 125 (2005), H. 3
Y1 - 2005
SN - 0340-4803
SP - 51
EP - 53
ER -
TY - JOUR
A1 - Kämper, Klaus-Peter
A1 - Merten, Sabine
A1 - Brill, Manfred
A1 - Picard, Antoni
T1 - Praxisorientierte Ingenieurausbildung durch multimedial unterstützte Laborkurse. Merten, Sabine ; Kämper, Klaus-Peter ; Brill, Manfred ; Picard, Antoni
JF - Online-Pädagogik. Bd. 3 Referenzmodelle und Praxisbeispiele / hrsg. von Burkhard Lehmann ...
Y1 - 2005
SN - 3-89676-987-1
PB - Schneider-Verl. Hohengehren
CY - Baltmannsweiler
ER -
TY - JOUR
A1 - Kämper, Klaus-Peter
A1 - Picard, A.
A1 - Schütze, A.
T1 - Die Ausbildungsfoundry pro-mst und das virtuelle Technologielabor: Ein Konzept für eine exzellente praktische MST-Ausbildung in einem modernen Reinraum zu niedrigen Gesamtkosten. Picard, A.; Kämper, K.-P.; Schütze, A.
JF - Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium für Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle
Y1 - 2005
SN - 3-8007-2926-1
N1 - Mikrosystemtechnik-Kongress <2005, Freiburg, Breisgau>
SP - 127
PB - VDE-Verl.
CY - Berlin
ER -
TY - JOUR
A1 - Enning, Manfred
A1 - Zambou, N.
A1 - Abel, D.
T1 - Longitudinal Control of Following Vehicles within Platoon : A Model-Based Predictive Approach / Zambou, N. ; Enning, M. ; Abel, D.
JF - Advances in automotive control 2004 : a proceedings volume from the IFAC symposium, Salerno, Italy, 19 - 23 April 2004 / ed. C. Pianese
Y1 - 2005
SN - 0080442501
N1 - International Federation of Automatic Control ; Symposium on Advances in Automotive Control ; (4, 2004, Salerno)
SP - 733
EP - 738
PB - Elsevier
CY - Oxford
ER -
TY - JOUR
A1 - Kallweit, Stephan
A1 - Kaminsky, R.
A1 - Rossi, M.
A1 - Morbiducci, U.
T1 - Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1 - 2005
SN - 1724-6040
N1 - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP - 946
ER -
TY - JOUR
A1 - Kallweit, Stephan
A1 - Kaminsky, R.
A1 - Rossi, M.
A1 - Morbiducci, U.
T1 - 2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R.
JF - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1 - 2005
SN - 1724-6040
N1 - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP - 921
ER -
TY - JOUR
A1 - Kallweit, Stephan
A1 - Kaminsky, R.
A1 - Rossi, M.
A1 - Morbiducci, U.
T1 - 3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1 - 2005
SN - 1724-6040
N1 - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP - 868
ER -
TY - JOUR
A1 - Kallweit, Stephan
A1 - Kaminsky, R.
A1 - Rossi, M.
A1 - Scalise, L.
T1 - PIV Measurements with high temporal Resolution behind Artificial Heart Valves / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.
JF - Proceedings of the 6th International Symposium on Particle Image Velocimetry
Y1 - 2005
N1 - link zum abstract
PB - Caltech
CY - Pasadena, CA
ER -
TY - CHAP
A1 - Dilthey, Ulrich
A1 - Brandenburg, Annette
A1 - Schleser, Markus
T1 - Mikrokleben
T2 - Montage hybrider Mikrosysteme : Handhabungs- und Fügetechniken für die Klein- und Mittelserienfertigung
Y1 - 2005
SN - 978-3-540-23706-8
SP - 161
EP - 172
PB - Springer
CY - Berlin [u.a.]
ER -
TY - CHAP
A1 - Kolkmann, Annette
A1 - Gries, Thomas
A1 - Schleser, Markus
A1 - Dilthey, Ulrich
T1 - Innovative yarn structures and coatings for textile reinforced concrete
T2 - All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main
Y1 - 2005
CY - Frankfurt a.M.
ER -
TY - JOUR
A1 - Dilthey, Ulrich
A1 - Schleser, Markus
A1 - Geßler, Achim
A1 - Rettweiler, Timo
A1 - Völling, Boris
T1 - Kleben textilbewehrter Betonbauteile
JF - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8
Y1 - 2005
SN - 0036-7184
SP - 373
EP - 377
ER -
TY - CHAP
A1 - Seiler, Friedrich
A1 - George, Alfred
A1 - Pfaff, Raphael
A1 - Srulijes, Julio
T1 - Stand der Entwicklung des ISL Dopplerbildverfahrens
T2 - GALA : 13. Fachtagung Lasermethoden in der Strömungsmesstechnik : 6. - 8. September 2005, Cottbus
Y1 - 2005
SN - 3-9805613-2-1
SP - 24-1
EP - 24-8
PB - Techn. Univ.
CY - Cottbus
ER -
TY - RPRT
A1 - Pfaff, Raphael
A1 - George, Alfred
A1 - Seiler, Friedrich
A1 - Srulijes, Julio
T1 - Dopplerbild-Verfahren : Entwicklung einer neuen Auswertemethode. (Bericht / ISL / AGARD ; R 124/2005)
Y1 - 2005
PB - ISL
CY - Saint Louis, France
ER -
TY - BOOK
A1 - Merten, Sabine
T1 - Verbesserung der Ausbildung in der Mikrosystemtechnik - virtuelle Labore bereiten auf die Herstellung realer Drucksensoren vor (2 Fassungen: konvertiert und original
N2 - Die Ausbildung in Hochtechnologien wie beispielsweise der Mikrosystemtechnik ist oft durch einen hohen Grad an Komplexität charakterisiert. Damit verbunden sind hohe Kosten für die Errichtung und den Betrieb der speziellen Laborräume und ihre häufig geringe Verfügbarkeit für die Studierenden. Zukünftige Ingenieure sammeln während ihrer Ausbildung aus diesen Gründen nur in beschränktem Umfang praktische Erfahrungen. Die Industrie hingegen fordert Personal mit hoher fachlicher Kompetenz, also fundiertem theoretischen Wissen und umfangreichen praktischen Kenntnissen. Dieser Diskrepanz – qualifizierte Ingenieure auf der einen Seite und eine eher theoretisch ausgerichtete Ausbildung auf der anderen Seite – wird mit einem neuen Blended-Learning-Konzept für MST-Technologiepraktika begegnet. Lernende werden über ein virtuelles Labor, das einen echten Reinraum mit realen Anlagen simuliert, intensiv auf reale Laborpraktika vorbereitet. Dabei geht es im virtuellen Labor gleichermaßen um die Vermittlung von Theorie und Praxis. Nur trainierte Teilnehmer mit einer intensiven Vorbereitung sind in der Lage, relativ eigenständig ein echtes MST-Bauteil innerhalb des anschließenden einwöchigen Laborkurses zu fertigen. Die Wirksamkeit des Konzeptes und die Steigerung des Lernerfolges durch die kombinierten virtuellen und realen Laborkurse wurden im Rahmen der Dissertation begleitend untersucht. Die Ergebnisse flossen direkt in die Weiterentwicklung der Technologiepraktika ein. Die Konzepte und Erkenntnisse sind zudem sehr interessant für die Entwicklung von Blended-Learning-Angeboten in ähnlichen oder anderen Fachgebieten sowie für weitere Bildungseinrichtungen. (Die Dissertation liegt hier in 2 Fassungen vor: Die Originalfassung ist nur bei guter Rechnerausstattung und guter Netzanbindung nutzbar, die konvertierte Fassung ist unverändert, allerdings sind Qualitätseinbußen beim Ausdruck einiger Grafiken möglich)
N2 - Education in high technologies, like e.g. Microsystems technology, is usually characterized by a high degree of complexity. In addition it is usually connected with large economic efforts for invest, operation and maintenance of the special laboratory facilities. The access to such facilities for educational purposes is often quite limited. Therefore engineering students rather rarely gather practical experience in such technologies during their university studies. In contrast, industry has a large demand for engineers with high professional competence, i.e. profound theoretical knowledge combined with substantial practical experience. The newly developed blended learning concept for MST laboratory training tries to bridge the gap between the need for qualified engineers and the more theoretical university education. The learners prepare intensively for real hands-on clean room trainings with a virtual technology laboratory, i.e. a computer simulation of the clean room machines and the corresponding processes. In the virtual technology laboratory the students brush up their theoretical knowledge and at the same time learn to operate the complex clean room machines. Only well trained and intensively prepared students are capable to produce a fully functional MST component within a compact clean room laboratory course of only one week duration and an only modest amount of supervision. The effectivity of this concept and the increase of the learning success due to the specific mixture of virtual and real laboratory sessions has been accompanied and analysed by this dissertation. The results have been used to further improve the laboratory courses. Concepts and results are also very attractive for comparable blended learning proposals in other technical disciplines.
KW - Mikrosystemtechnik
KW - Virtuelles Laboratorium
KW - Lernprogramm
KW - Hochschule / Lehre / Evaluation
KW - Computersimulation
KW - Drucksensor
KW - Blended-Learning
KW - Reinraumpraktikum
KW - blended learning
KW - hands-on cleanroom training
Y1 - 2005
N1 - Zugl.: Saarbrücken, Univ., Diss., 2005
ER -
TY - CHAP
A1 - Gebhardt, Andreas
A1 - Schmidt, Frank-Michael
T1 - Farbige Prototypen als Werkzeug für den Konstrukteur
T1 - Colored prototypes as instrument for the constructing engineer
N2 - Physische Prototypen, also Anschauungs- und Funktionsmodelle nach den generativen oder Rapid Prototyping (RP) Verfahren haben sich in diesem Zusammenhang vor allem als Hilfsmittel zur effektiven Kommunikation und zur Evaluierung von Produkteigenschaften einen festen Platz in der Produktentstehung erworben. Die positiven Effekte der etablierten RP Verfahren sind unumstritten. Einfachere, schnellere und wirtschaftlichere Maschinen (Prototyper, Fabrikator), vor allem auch für die Büroumgebung, geben neue Impulse im Sinne der Optimierung der heutigen Verfahren. Eine neue Dimension verspricht die Option „Farbe“ der bisher fast ausschließlich monochromen Modelle. Ist Farbe nur „nice to have“ oder welchen Effekt haben farbige Modelle als Werkzeug von Konstrukteuren und Produktenwicklern? Welche Perspektiven bietet „Farbe“ darüber hinaus?
KW - Prototyping
KW - Rapid prototyping
KW - Prototypen
KW - Funktionsmodelle
KW - Produktentstehung
KW - Prototyper
KW - Produktenwicklung
KW - prototypes
KW - working models
KW - product emergence
KW - prototyper
KW - product development
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Werkstoffkunde 3
N2 - Übungsklausur
KW - Werkstoffkunde
KW - Fertigungsverfahren
KW - Übungsklausur
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Fertigungsverfahren I : Urformen ; Skript zur Vorlesung
N2 - Urformen aus dem flüssigen oder teigigen Zustand Im Mittelpunkt stehen alle Gießverfahren. Großtechnische Bedeutung haben neben den Metallgießverfahren vor allem auch Verfahren zum Urformen von Kunststoffen und in steigendem Maße auch solche zur Herstellung von Keramiken und Kompositwerkstoffen
KW - Fertigungsverfahren
KW - Urformen
KW - Gießen
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Fertigungsverfahren I : Umformen ; Skript zur Vorlesung
N2 - Grundlagen, Druck-Umformen (Walzen, Schmieden, Gesenkschmieden), Zugdruckumformen (Durchziehen, Tiefziehen), Zugumformen, Biegeumformen
KW - Umformverfahren
KW - Druck-Umformen
KW - Zugdruckumformen
KW - Zugumformen
KW - Biegeumformen
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Fertigungsverfahren 1
N2 - Übungsklausur
KW - Fertigungsverfahren
KW - Übungsklausur
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Regelungstechnik : Skript zur Vorlesung
N2 - Prinzip und Geschichte der Regelungstechnik; technische Steuerungen und Regelungen; Definition und Stellung innerhalb der Automatisierungstechnik. Elementare Übertragungsglieder, Streckentypen, typische Regler (unstetige Regler, stetige Regler), Reglerentwurf (einfache Verfahren, einschließlich Faustformelverfahren). Stabilitätsanalyse von Regelkreisen (einfache Verfahren, ohne Herleitung der Beweise)
KW - Regelungstechnik
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Digitale Regelungstechnik
N2 - Grundlagen (Prinzip, Komponenten, Abtastung, Aliasing) Algorithmus (Implementierung, Pseudo Code, Ermittlung der Faktoren) Beispiel
KW - Digitale Regelungstechnik
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Fuzzy Regelung
N2 - Überblick Fuzzy-Regler, Fuzzy Sets (Scharfe Mengen, Fuzzy Sets, Formen (stückweise linear, gaußförmig, glockenförmig), Eigenschaften (Gleichheit, Teilmenge)), Fuzzy Operatoren (NICHT, UND, ODER) Fuzzyfizierung Inferenzen (Verarbeitungsvorschrift, Ermittlung der aktiven Regeln, Ermittlung der Fuzzy Mengen, Überlagerung) Defuzzyfizierung (Mean-of-Maximum, Center-of-Gravity, Largest-of-Maximum, Smallest-of-Maximum, Center-of-Singletons) Entwurf, Beispiel, Fuzzy Tools, Internet, Literatur
KW - Regelungstechnik
KW - Fuzzy Regelung
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Regelungstechnik
N2 - Übungsklausur
KW - Regelungstechnik
KW - Übungsklausur
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Lasertechnologie : Laser - Materialbearbeitung ; Grundlagen - Verfahren - Anwendungen
N2 - Theoretische Grundlagen, Grundlagen der Materialbearbeitung mit Laserstrahlung, Aufbau und Funktion von Laser-Bearbeitungsanlagen, Laserstrahl-Schneiden, Laserstrahl-Schweißen, Laserstrahl-Bohren, Beschriften und Markieren mit dem Laser, Oberflächenveredeln mit dem Laser, Lasersicherheit, Umweltschutz
KW - Laser
KW - Materialbearbeitung
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Lasertechnologie
N2 - Übungsklausur
KW - Lasertechnologie
KW - Übungsklausur
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Lasermesstechnik 1
N2 - Strahlquelle, Verfahren, Triangulation, Interferometrie, Laufzeit, Lidar, Holographie, Speckle, Applikationen, Laseroptische Strömungsmessung, Laser Doppler Velocimetry, Particle Image Velocimetry
KW - Lasermesstechnik
Y1 - 2005
ER -