TY  - JOUR
A1  - Wagner, Torsten
A1  - Rao, C.
A1  - Kloock, Joachim P.
A1  - Yoshinobu, T.
A1  - Otto, R.
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - “LAPS Card”—A novel chip card-based light-addressable potentiometric sensor (LAPS)
JF  - Sensors and Actuators B: Chemical. 118 (2006), H. 1-2
Y1  - 2006
SN  - 0925-4005
N1  - Eurosensors XIX - Eurosensors XIX - The 19th European Conference on Solid-State Transducers
SP  - 33
EP  - 40
ER  - 
TY  - JOUR
A1  - Kellner, Katja
A1  - Lind, Thorsten Patric
T1  - Zur Verjährung des Anspruchs aus § 32b GmbHG
JF  - Zeitschrift für das gesamte Insolvenzrecht : ZInsO
Y1  - 2006
SN  - 1615-8032
IS  - H. 8
SP  - 413
EP  - 414
ER  - 
TY  - BOOK
A1  - Lind, Thorsten Patric
T1  - Zur Auslegung von § 133 InsO, insbesondere im System der Anfechtungstatbestände. (Juristische Reihe Tenea ; 105)
Y1  - 2006
SN  - 3-86504-155-8
PB  - Tenea, Verl. für Medien
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Koplin, Tobias J.
A1  - Siemons, Maike
A1  - Océn-Valéntin, César
A1  - Sanders, Daniel
A1  - Simon, Ulrich
T1  - Workflow for high throughput screening of gas sensing materials
N2  - The workflow of a high throughput screening setup for the rapid identification of new and improved sensor materials is presented. The polyol method was applied to prepare nanoparticular metal oxides as base materials, which were functionalised by surface doping. Using multi-electrode substrates and high throughput impedance spectroscopy (HT-IS) a wide range of materials could be screened in a short time. Applying HT-IS in search of new selective gas sensing materials a NO2-tolerant NO sensing material with reduced sensitivities towards other test gases was identified based on iridium doped zinc oxide. Analogous behaviour was observed for iridium doped indium oxide.
KW  - Biosensor
KW  - High throughput experimentation
KW  - gas sensor
KW  - metal oxide
KW  - doping
KW  - impedance spectroscopy
KW  - nitrogen oxides
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1407
ER  - 
TY  - JOUR
A1  - Laumann, Jörg
T1  - Wirtschaftliche Bemessung von Kranbahnträgern unter Berücksichtigung örtlicher Spannungen infolge Radlasteinleitung
JF  - Stahlbau. 75 (2006), H. 12
Y1  - 2006
SN  - 1437-1049
SP  - 1004
EP  - 1012
ER  - 
TY  - BOOK
A1  - Wollert, Jörg
T1  - Wireless Technologies : 8. Kongress, 27. - 28. September 2006, Dortmund : von der Technologie zur Anwendung / Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 772)
Y1  - 2006
SN  - 3-18-377210-8
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Gerhardt, Hans Joachim
T1  - Wind- und Temperatureinflüsse bei der Planung von Entrauchungseinrichtungen
JF  - VFDB-Zeitschrift : Forschung, Technik und Management im Brandschutz. 55 (2006), H. 3
Y1  - 2006
SN  - 0042-1804
SP  - 115
EP  - 121
ER  - 
TY  - BOOK
A1  - Janz, Norbert
A1  - Goedhuys, Micheline
A1  - Mohnen, Pierre
T1  - What drives productivity in Tanzanian manufacturing firms: technology or institutions? / Goedhuys, Micheline ; Janz, Norbert ; Mohnen, Pierre
Y1  - 2006
N1  - Working paper series // United Nations University, UNU-MERIT ; 2006,037
PB  - UnU-MERIT
CY  - Maastricht
ER  - 
TY  - JOUR
A1  - Jochim, Haldor E.
T1  - Warum Ingenieure nicht rechnen und Controller nicht schätzen können
JF  - EI - Eisenbahningenieur. 57 (2006), H. 1
Y1  - 2006
SN  - 0013-2810
SP  - 54
EP  - 56
ER  - 
TY  - JOUR
A1  - Chwallek, Constanze
A1  - Felden, Brigit
T1  - Wachstumsfinanzierung in der Nachgründungsphase / Chwallek, Constanze ; Felden, Birgit
JF  - Finanz-Betrieb : FB ; Zeitschrift für Unternehmensfinanzierung und Finanzmanagement. 8 (2006), H. 10
Y1  - 2006
SN  - 1437-8981
SP  - 664
EP  - 675
ER  - 
TY  - GEN
A1  - Rongen, Heinz
A1  - Ziemons, Karl
A1  - Schiek, Michael
A1  - Tass, Alexander
T1  - Vorrichtung zur Messung biomedizinischer Daten eines Probanden und Verfahren zur Simulation des Probanden mit in Echtzeit verarbeiteten Daten
T1  - Device for measuring biomedical data from a testee and method for stimulating the testee with data processed in real-time
N2  - Die Erfindung betrifft eine Vorrichtung zur Messung biomedizinischer Daten eines Probanden, mit einem Messsystem zur Erhebung der Daten sowie einer ersten Hardware-Komponente zur Aufzeichnung der Daten. In einer Verbindungsleitung zur Übertragung der Daten vom Messsystem zur ersten Hardware-Komponente zur Aufzeichnung der Daten ist erfindungsgemäss ein Mittel zur galvanischen Auftrennung der Daten angeordnet. Auf diese Weise ist wenigstens die Duplizierung der Daten für Datenverarbeitungszwecke gewährleistet. Die auf diese Weise verarbeiteten Daten werden für ein Verfahren zur Echtzeit-Stimulation eines Probanden genutzt.
Y1  - 2006
N1  - Auch veröffentlicht als EP2007276 ; US2009069662 ; US8301222 ; JP2009535071 ; WO2007118443 ; AT 533401
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Calmes, Laurent
A1  - Lakemeyer, Gerhard
A1  - Wagner, Hermann
T1  - Von Schleiereulen und fussballspielenden Robotern / Calmes, Laurent ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Wagner, Hermann
JF  - RWTH Themen (2006)
Y1  - 2006
SN  - 0179-079X
SP  - 30
EP  - 33
ER  - 
TY  - CHAP
A1  - Merten, Sabine
A1  - Conrad, Thorsten
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Schütze, Andreas
T1  - Virtual Technology Labs - an efficient tool for the preparation of hands-on-MEMS-courses in training foundries
N2  - Hands-on-training in high technology areas is usually limited due to the high cost for lab infrastructure and equipment. One specific example is the field of MEMS, where investment and upkeep of clean rooms with microtechnology equipment is either financed by production or R&D projects greatly reducing the availability for education purposes. For efficient hands-on-courses a MEMS training foundry, currently used jointly by six higher education institutions, was established at FH Kaiserslautern. In a typical one week course, students manufacture a micromachined pressure sensor including all lithography, thin film and packaging steps. This compact and yet complete program is only possible because participants learn to use the different complex machines in advance via a Virtual Training Lab (VTL). In this paper we present the concept of the MEMS training foundry and the VTL preparation together with results from a scientific evaluation of the VTL over the last three years.
KW  - Virtuelles Laboratorium
KW  - Virtuelles Labor
KW  - Hand-on-training
KW  - Virtual Technology Lab
KW  - MEMS ; education and training foundry
Y1  - 2006
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
T1  - Verringerung des Phasenrauschens von Oszillatoren durch Dual-Mode-Resonatoren
JF  - HF-Report. 20 (2006), H. 5-6
Y1  - 2006
SN  - 1431-827X
SP  - 43
EP  - 48
ER  - 
TY  - JOUR
A1  - Timme, Michael
T1  - Vermieters Reaktionspflichten bei nachträglichem Wegfall des Eigenbedarfs
JF  - NZM : neue Zeitschrift für Miet- und Wohnungsrecht ; Miete, Wohnungseigentum, Pacht, Makler- und Bauträgerrecht, Steuern, Wohnungswirtschaft, Versicherung, Immobilienleasing, Time-Sharing. 9 (2006)
Y1  - 2006
SN  - 1434-677X
SP  - 249
EP  - 252
ER  - 
TY  - JOUR
A1  - Winkler, Norbert
T1  - Vermessung
JF  - Zahlentafeln für den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. überarb. Aufl.
Y1  - 2006
SN  - 3-519-65220-X
N1  - Kapitel 3
SP  - 147
EP  - 160
PB  - Teubner
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Winkler, Norbert
T1  - Vermessung
JF  - Beispiele für die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].
Y1  - 2006
SN  - 978-3-8351-0002-2
N1  - Kapitel 2
SP  - 9
EP  - 34
PB  - Teubner
CY  - Wiesbaden
ER  - 
TY  - PAT
A1  - Jeromin, Günter Erich
A1  - Daußmann, Thomas
A1  - Hippchen, Hendrik
A1  - Riß, Patrick
T1  - Verfahren zur enzymatischen Herstellung von optisch aktiven trans-1,2-Cyclopropandicarbonsäurediestern und optisch aktiven trans-1,2-Cyclopropandicarbonsäuremonoestern : Offenlegungsschrift DE102004059469A1 ; Offenlegungsdatum: 14.06.2006 /  Erfinder: Jeromin, Günter E. ; Daußmann, Thomas ; Hippchen, Hendrik ; Riß, Patrick
Y1  - 2006
N1  - Volltext über Datenbank: http://publikationen.dpma.de/
PB  - Deutsches Patent- und Markenamt
CY  - München
ER  - 
TY  - PAT
A1  - Hilgenstock, Jörg
A1  - Lange, Robert
A1  - Riedel, Helmut
A1  - Ringbeck, Thorsten
T1  - Verfahren und Entfernungsmessvorrichtung zum Bestimmen der Entfernung zwischen einem Objekt und der Vorrichtung : [Offenlegungsschrift / Europäische Patentanmeldung]
T1  - Method and distance measuring device for determining the distance between an object and the device
Y1  - 2006
PB  - Deutsches Patent- und Markenamt / Europäisches Patentamt
CY  - München / Den Hague
ER  - 
TY  - JOUR
A1  - Olk, Ulrich
T1  - Unfallverhütung
JF  - Zahlentafeln für den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. überarb. Aufl.
Y1  - 2006
SN  - 3-519-65220-X
N1  - Kapitel 14
SP  - 833
EP  - 929
PB  - Teubner
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Fredebeul-Krein, Markus
A1  - Vogel, Erika
T1  - Underground Storage Facilities in the German natural gas market: A need for access regulation to ensure competition?
JF  - Zeitschrift für Energiewirtschaft. 30 (2006), H. 4
Y1  - 2006
SN  - 0343-5377
SP  - 257
EP  - 270
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Mikulics, M.
A1  - Wu, S.
A1  - Marso, M.
T1  - Ultrafast and Highly Sensitive Photodetectors With Recessed Electrodes Fabricated on Low-Temperature-Grown GaAs. Mikulics, M.; Wu, S.; Marso, M.; Adam, R.; Förster, A.; van der Hart, A.; Kordos, P.; Lüth, H.; Sobolewski, R.
JF  - IEEE Photonics Technology Letters. 18 (2006), H. 7
Y1  - 2006
SP  - 820
EP  - 822
ER  - 
TY  - JOUR
A1  - Streun, M.
A1  - Chavan, U.
A1  - Lame, H.
A1  - Parl, C.
A1  - Müller-Veggian, Mattea
A1  - Ziemons, Karl
T1  - Treating the Gain Non-Uniformity of Multi Channel PMTs by Channel-Specific Trigger Levels
JF  - 2006 IEEE Nuclear Science Symposium Conference Record, Vol. 2.
Y1  - 2006
SN  - 1082-3654
SP  - 1301
EP  - 1304
CY  - San Diego, CA
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Niendorf, Thoralf
T1  - Training of a combined model of larynx and vocal folds with data from MRI measurements
T2  - The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings
Y1  - 2006
SP  - 45
EP  - 46
ER  - 
TY  - BOOK
A1  - Blaß, Hans Joachim
A1  - Bejtka, Ireneusz
A1  - Uibel, Thomas
T1  - Tragfähigkeit von Verbindungen mit selbstbohrenden Holzschrauben mit Vollgewinde
Y1  - 2006
SN  - 3-86644-034-0
PB  - Universitäts-Verl.
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Blaß, Hans Joachim
A1  - Uibel, Thomas
ED  - Kuhlmann, U.
T1  - Tragfähigkeit von stiftförmigen Verbindungsmitteln in Brettsperrholz
T2  - Forschungskolloquium, Holzbau Forschung und Praxis, Stuttgart 2006. Tagungsband
Y1  - 2006
SP  - 167
EP  - 174
PB  - Universität
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Ingebrandt, Sven
A1  - Platen, Johannes
A1  - Offenhäusser, Andreas
A1  - Poghossian, Arshak
ED  - Comini, Elisabetta
T1  - Towards label-free detection of charged macromolecules using field-effect-based structures : Scaling down from capacitive EIS sensor over ISFET to nano-scale devices
JF  - Nanostructured materials and hybrid composites for gas sensors and biomedical applications : symposium held April 18-20, 2006, San Francisco , California, U.S.A.
Y1  - 2006
SN  - 9781558998711
IS  - paper 0915-R05-04
SP  - 89
EP  - 94
ER  - 
TY  - JOUR
A1  - Augenstein, Eckardt
A1  - Herbergs, S.
A1  - Kuperjans, Isabel
T1  - TOP-Energy : ein Werkzeug zur Optimierung der Gebäudeenergieversorgung
JF  - KI : Kälte, Luft, Klimatechnik
Y1  - 2006
SN  - 1865-5432
IS  - 5
SP  - 198
EP  - 201
ER  - 
TY  - JOUR
A1  - Streun, M.
A1  - Brandenburg, G.
A1  - Khodaverdi, M.
A1  - Larue, H.
A1  - Parl, C.
A1  - Ziemons, Karl
T1  - Timemark correction for the ClearPET™ scanners
JF  - 2005 IEEE Nuclear Science Symposium Conference Record, Vol. 4
N2  - The small animal PET scanners developed by the Crystal Clear Collaboration (ClearPETtrade) detect coincidences by analyzing timemarks which are attached to each event. The scanners are able to save complete single list mode data which allows analysis and modification of the timemarks after data acquisition. The timemarks are obtained from the digitally sampled detector pulses by calculating the baseline crossing of the rising edge of the pulse which is approximated as a straight line. But the limited sampling frequency causes a systematic error in the determination of the timemark. This error depends on the phase of the sampling clock at the time of the event. A statistical method that corrects these errors will be presented
Y1  - 2006
SN  - 1082-3654
SP  - 2057
EP  - 2060
ER  - 
TY  - JOUR
A1  - Dikta, Gerhard
T1  - Time series methods to forecast patent filings
JF  - Forecasting innovations : methods for predicting numbers of patent filings ; with 71 tables / Peter Hingley ; Marc Nicolas (ed.),
Y1  - 2006
SN  - 978-3-540-35991-3
U6  - http://dx.doi.org/10.1007/3-540-35992-3_6
N1  - ISBN 3-540-35991-5
SP  - 95
EP  - 124
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Herrmann, Ulf
A1  - Worringer, S.
A1  - Graeter, F.
A1  - Nava, P.
ED  - Romero, Manuel
T1  - Three Years of Operation Experience of the SKAL-ET Collector Loop at SEGS V
T2  - 13th International Symposium Concentrated Solar Power and Chemical Energy Technologies, June 20 - 23, 2006, Seville, Spain
Y1  - 2006
SN  - 84-7834-519-1
PB  - SolarPACES [u.a.]
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schubert, J.
A1  - Ermelenko, Y.
A1  - Vlasov, Y. G.
A1  - Bratov, A.
A1  - Schöning, Michael Josef
T1  - Thin-film sensors with chalcogenide glass materials – a general survey
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 92
EP  - 97
CY  - Warsaw
ER  - 
TY  - JOUR
A1  - Hoffschmidt, Bernhard
A1  - Becker, M.
A1  - Fend, Thomas
T1  - Theoretical and numerical investigation of flow stability in porous materials applied as volumetric solar receivers / M. Becker ; T. Fend ; B. Hoffschmidt ...
JF  - Solar energy. 80 (2006), H. 10
Y1  - 2006
SN  - 0038-092X
N1  - Solar Power and Chemical Energy Systems (SolarPACES’04)
SP  - 1241
EP  - 1248
ER  - 
TY  - JOUR
A1  - Müller-Veggian, Mattea
A1  - Moro, D.
A1  - Ferreti, A.
A1  - Colautti, P.
T1  - The new articulated twin mini TEPC
JF  - Annual Report  2006 / Istituto Nazionale di Fisica Nucleare <Frascati> / Laboratori Nazionali <Legnaro>
Y1  - 2006
SP  - 273
CY  - Legnaro
ER  - 
TY  - CHAP
A1  - Ballmann, Josef
A1  - Dafnis, Athanasios
A1  - Braun, Carsten
A1  - Korsch, Helge
A1  - Reimerdes, Hans-Günther
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - The HIRENASD project: High Reynolds number aerostructural dynamics experiments in the European Transonic Wind Tunnel (ETW)
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-5.11.2
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - JOUR
A1  - Streun, M.
A1  - Brandenburg, G.
A1  - Larue, H.
A1  - Parl, C.
A1  - Ziemons, Karl
T1  - The data acquisition system of ClearPET neuro - a small animal PET scanner
JF  - IEEE Transactions on Nuclear Science
N2  - The Crystal Clear Collaboration has developed a modular system for a small animal PET scanner (ClearPET). The modularity allows the assembly of scanners of different sizes and characteristics in order to satisfy the specific needs of the individual member institutions. The system performs depth of interaction detection by using a phoswich arrangement combining LSO and LuYAP scintillators which are coupled to Multichannel Photomultipliers (PMTs). For each PMT a free running 40 MHz ADC digitizes the signal and the complete scintillation pulse is sampled by an FPGA and sent with 20 MB/s to a PC for preprocessing. The pulse provides information about the gamma energy and the scintillator material which identifies the interaction layer. Furthermore, the exact pulse starting time is obtained from the sampled data. This is important as no hardware coincidence detection is implemented. All single events are recorded and coincidences are identified by software. The system in Jülich (ClearPET Neuro) is equipped with 10240 crystals on 80 PMTs. The paper will present an overview of the data acquisition system.
Y1  - 2006
SN  - 0018-9499
VL  - 53
IS  - 3
SP  - 700
EP  - 703
ER  - 
TY  - JOUR
A1  - Dethloff, Nina
A1  - Kroll-Ludwigs, Kathrin
T1  - The Constitutional Court as Driver of Reforms in German Family Law
JF  - International Survey of Family Law
Y1  - 2018
SP  - 217
EP  - 234
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
A1  - Buda, A.
A1  - Altrock, R.
T1  - The capability of bluetooth for real-time transmission in automation
T2  - Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand
Y1  - 2006
SP  - 168
EP  - 175
PB  - Acta Pr.
CY  - Anaheim, Calif.
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
T1  - Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006
N2  - Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education – Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education – Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company – Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone – Set up your own business 2.5 Level 5: Grow to be Strong – Develop your business 2.6 Level 6: Competitive and independent – Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion
KW  - Technologietransfer
KW  - technology transfer
KW  - technology diffusion
Y1  - 2006
ER  - 
TY  - GEN
A1  - Staat, Manfred
T1  - Technische Mechanik. Vorlesungsmitschrift. Korrigierter Nachdr. der 3. Aufl.
N2  - Überarbeitete, korrigierte und ergänzte Version einer Vorlesungsmitschrift von Sebastian Krämer. 172 S. Inhaltsverzeichnis 0 Einführung in die Mechanik 1 Statik starrer Körper 2 Elastostatik (Festigkeitslehre) 3 Kinematik 4 Kinetik Literatur
KW  - Technische Mechanik
Y1  - 2006
ER  - 
TY  - JOUR
A1  - Havermann, Marc
T1  - Systematic Shock Tube Experiments on Vortex Ring Generation and Propagation / Havermann, M. ; Kainuma, M. ; Takayama, K.
JF  - Shock waves : proceedings of the 25th International Symposium on Shock Waves-ISSW25, July 17 - 22, 2005, Bangalore, India / ed.: G. Jagadeesh
Y1  - 2006
SN  - 978-81-7371571-6
N1  - International Symposium on Shock Waves ; 25 (Bangalore) : 2005.07.17-22
ISSW ; 25 (Bangalore) : 2005.07.17-22
PB  - Universities Pr.
CY  - Hyderabad
ER  - 
TY  - CHAP
A1  - Pijanowska, Dorota G.
A1  - Remiszewska, Elzbieta
A1  - Pederzolli, Cecilia
A1  - Lunelli, Lorenzo
A1  - Vendano, Michele
A1  - Canteri, Roberto
A1  - Dudzinski, Konrad
A1  - Kruk, Jerzy
A1  - Torbicz, Wladyslaw
T1  - Surface modification for microreactor fabrication
N2  - In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff’s base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective.
KW  - Biosensor
KW  - Microreactors
KW  - surface modification
KW  - enzyme immobilisation
KW  - lab-on-a-chip
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1480
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Singh, Virendra
A1  - Dhand, Chetna
A1  - Kaur, Manindar
A1  - Singh, Tejvir
A1  - Witte, Katrin
A1  - Scherer, Ulrich W.
T1  - Study of swift heavy ion modified conduction polymer composites for application as gas sensor
N2  - A polyaniline-based conducting composite was prepared by oxidative polymerisation of aniline in a polyvinylchloride (PVC) matrix. The coherent free standing thin films of the composite were prepared by a solution casting method. The polyvinyl chloride-polyaniline composites exposed to 120 MeV ions of silicon with total ion fluence ranging from 1011 to 1013 ions/cm2, were observed to be more sensitive towards ammonia gas than the unirradiated composite. The response time of the irradiated composites was observed to be comparably shorter. We report for the first time the application of swift heavy ion modified insulating polymer conducting polymer (IPCP) composites for sensing of ammonia gas.
KW  - Biosensor
KW  - Conducing polymer
KW  - ammonia gas sensors
KW  - swift heavy ions
KW  - polymer composites
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1345
ER  - 
TY  - JOUR
A1  - Schneider, Bettina
A1  - Schneider, Wilhelm
T1  - Studienfinanzierung: So kommt man an ein Stipendium
JF  - Das Wirtschaftsstudium : wisu ; Zeitschrift für Ausbildung, Examen, Berufseinstieg und Weiterbildung. 35 (2006), H. 12
Y1  - 2006
SN  - 0340-3084
N1  - in der Bereichsbibliothek Eupener Str. vorhanden unter 43 Z 568-2006
SP  - 1500
EP  - 1502
ER  - 
TY  - BOOK
A1  - Borchert, Jörg
A1  - Schemm, Ralf
A1  - Korth, Swen
T1  - Stromhandel: Institutionen, Marktmodelle, Pricing und Risikomanagement
Y1  - 2006
SN  - 978-3-7910-2542-1
PB  - Schäffer-Poeschel
CY  - Stuttgart
ER  - 
TY  - BOOK
A1  - Müller, Karsten
T1  - Strategien zur Zustandserfassung von Kanalisationen. Aachener Schriften zur Stadtentwässerung. Bd 7
Y1  - 2006
SN  - 978-3-938996-00-3
N1  - Zugl.: Aachen, Techn. Hochsch., Diss., 2005
PB  - Ges. zur Förderung der Siedlungswasserwirtschaft an der RWTH Aachen
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Kaminsky, Radoslav
A1  - Kallweit, Stephan
A1  - Weber, Hans-Joachim
A1  - Simons, Antoine
A1  - Verdonck, Pascal
T1  - Stereo high speed PIV measurements behind two different artificial heart valves
Y1  - 2006
N1  - International Symposium on Applications of Laser Techniques to Fluid Mechanics <13, 2006, Lisboa>
ER  - 
TY  - RPRT
A1  - Conan, Yulian
A1  - D'Haeyer, R.
A1  - Béguin, P.
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
A1  - Bayo, E.
T1  - Steel in low-rise building : a symbiosis of cold formed sections and light rolled profiles : final report. Contract-No. 7215-PP/070. EUR 22080 en
Y1  - 2006
SN  - 92-79-02082-X
PB  - Office for Official Publications of the European Communities
CY  - Luxembourg
ER  - 
TY  - BOOK
A1  - Weigand, Christoph
T1  - Statistik mit und ohne Zufall : eine anwendungsorientierte Einführung ; mit 10 Tabellen / Christoph Weigand
Y1  - 2006
SN  - 3-7908-1693-0
N1  - [Neuere Aufl. vorh.] https://doi.org/10.1007/978-3-662-59309-7
PB  - Physica-Verl.
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Kolymbas, Dimitrios
A1  - Fellin, W.
A1  - Kirsch, Ansgar
T1  - Squeezing due to stress relaxation in foliated rock
JF  - International journal for numerical and analytical methods in geomechanics
Y1  - 2006
U6  - http://dx.doi.org/10.1002/nag.530
SN  - 1096-9853 (E-Journal); 0363-9061 (Print)
VL  - Vol. 30
IS  - Iss. 13
SP  - 1357
EP  - 1367
ER  - 
TY  - JOUR
A1  - Hellwig, Angelika
A1  - Volkmann, Lutz
T1  - Some upper bounds for the domination number
JF  - The journal of combinatorial mathematics and combinatorial computing : JCMCC
Y1  - 2006
SN  - 0835-3026
VL  - Vol. 57
SP  - 187
EP  - 209
ER  - 
TY  - CHAP
A1  - Schwarzer, Klemens
T1  - Solarthermisches Entsalzungssystem mit Wärmerückgewinnung - Erste Feldtestergebnisse
T2  - 16. Symposium Thermische Solarenergie : 17. bis 19. Mai 2006, Kloster Banz, Bad Staffelstein
Y1  - 2006
SN  - 3-934681-45-X
SP  - 173
EP  - 178
PB  - Ostbayer. Technologie-Transfer-Inst.
CY  - Regensburg
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Kahle, Ralph
A1  - Wie, Bong
T1  - Solar Sailing Kinetic Energy Impactor (KEI) Mission Design Tradeoffs for Impacting and Deflecting Asteroid 99942 Apophis
JF  - AIAA Guidance, Navigation, and Control Conference & Exhibit - AIAA Atmospheric Flight Mechanics Conference & Exhibit - AIAA Modeling and Simulation Technologies Conference & Exhibit - AIAA/AAS Astrodynamics Specialist Conference & Exhibit : [21 - 24 August 2006, Keystone, Colorado ; papers]. - (AIAA meeting papers on disc ; [11.]2006,19-20 )
Y1  - 2006
SN  - 1-56347-802-1
N1  - American Institute of Aeronautics and Astronautics <Reston, Va.> ; American Astronautical Society ; AIAA/AAS Astrodynamics Specialist Conference & Exhibit <2006,  Keystone, Colo.> ; AIAA paper number: AIAA-2006-6178
SP  - 1
EP  - 20
PB  - American Institute of Aeronautics and Astronautics
CY  - Reston, Va.
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Ohndorf, A.
A1  - Wie, Bong
T1  - Solar Sail Trajectory Optimization for the Solar Polar Imager (SPI) Mission
JF  - AIAA Guidance, Navigation, and Control Conference & Exhibit - AIAA Atmospheric Flight Mechanics Conference & Exhibit - AIAA Modeling and Simulation Technologies Conference & Exhibit - AIAA/AAS Astrodynamics Specialist Conference & Exhibit : [21 - 24 August 2006, Keystone, Colorado ; papers]. - (AIAA meeting papers on disc ; [11.]2006,19-20 )
Y1  - 2006
SN  - 1-56347-802-1
N1  - American Institute of Aeronautics and Astronautics <Reston, Va.> ; American Astronautical Society ; AIAA/AAS Astrodynamics Specialist Conference & Exhibit <2006,  Keystone, Colo.> ; AIAA paper number: AIAA-2006-6177
PB  - American Institute of Aeronautics and Astronautics
CY  - Reston, Va.
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Kahle, Ralph
A1  - Wie, Bong
T1  - Solar sail Kinetic Energy Impactor (KEI) mission design tradeoffs for impacting and deflecting asteroid 99942 Apophis
T2  - AIAA/AAS Astrodynamics Specialist Conference and Exhibit
N2  - Near-Earth asteroid 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several so-called gravitational keyholes during its 2029-encounter. Several pre-2029-deflection scenarios to prevent Apophis from doing this have been investigated so far. Because the keyholes are less than 1 km in size, a pre-2029 kinetic impact is clearly the best option because it requires only a small change in Apophis' orbit to nudge it out of a keyhole. A single solar sail Kinetic Energy Impactor (KEI) spacecraft that impacts Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages at about 0.75 AU would be a feasible option to do this. The spacecraft consists of a 160 m x 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. In this paper, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, solar sail Kinetic Energy Impactor (KEI) spacecraft are still a feasible option to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value. In this paper, we elaborate potential pre- and post-2029 KEI impact scenarios for a launch in 2020, and investigate tradeoffs between different mission parameters.
KW  - Solar Sail
KW  - Asteroid Deflection
KW  - Planetary Protection
KW  - Trajectory Optimization
Y1  - 2006
U6  - http://dx.doi.org/10.2514/6.2006-6178
N1  - AIAA/AAS Astrodynamics Specialist Conference and Exhibit, 21 August 2006 - 24 August 2006, Keystone, Colorado(USA).
SP  - 1
EP  - 20
ER  - 
TY  - CHAP
A1  - Barek, Jiri
A1  - Fischer, Jan
A1  - Navratil, Tomas
A1  - Peckova, Karolina
A1  - Yosypchuk, Bogdan
T1  - Silver solid amalgam electrodes as sensors for chemical carcinogens
N2  - The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte.
KW  - Biosensor
KW  - Solid amalgam electrodes
KW  - voltammetry
KW  - carcinogens
KW  - 3-nitrofluoranthene
KW  - Ostazine Orange
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1554
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Silicon-based chemical and biological field-effect sensors
T2  - Encyclopedia of Sensors. Vol. 9 S - Sk
Y1  - 2006
SN  - 1-58883-065-9
SP  - 463
EP  - 534
PB  - ASP, American Scientific Publ.
CY  - Stevenson Ranch, Calif.
ER  - 
TY  - CHAP
A1  - Loeb, Horst W.
A1  - Schartner, Karl-Heinz
A1  - Seboldt, Wolfgang
A1  - Dachwald, Bernd
A1  - Streppel, Joern
A1  - Meusemann, Hans
A1  - Schülke, Peter
T1  - SEP for a lander mission to the jovian moon europa
T2  - 57th International Astronautical Congress
N2  - Under DLR-contract, Giessen University and DLR Cologne are studying solar-electric propulsion missions (SEP) to the outer regions of the solar system. The most challenging reference mission concerns the transport of a 1.35-tons chemical lander spacecraft into an 80-RJ circular orbit around Jupiter, which would enable to place a 375 kg lander with 50 kg of scientific instruments on the surface of the icy moon "Europa". Thorough analyses show that the best solution in terms of SEP launch mass times thrusting time would be a two-stage EP module and a triple-junction solar array with concentrators which would be deployed step by step. Mission performance optimizations suggest to propel the spacecraft in the first EP stage by 6 gridded ion thrusters, running at 4.0 kV of beam voltage, which would save launch mass, and in the second stage by 4 thrusters with 1.25 to 1.5 kV of positive high voltage saving thrusting time. In this way, the launch mass of the spacecraft would be kept within 5.3 tons. Without a launcher's C3 and interplanetary gravity assists, Jupiter might be reached within about 4 yrs. The spiraling-down into the parking orbit would need another 1.8 yrs. This "large mission" can be scaled down to a smaller one, e.g., by halving all masses, the solar array power, and the number of thrusters. Due to their reliability, long lifetime and easy control, RIT-22 engines have been chosen for mission analysis. Based on precise tests, the thruster performance has been modeled.
Y1  - 2006
U6  - http://dx.doi.org/10.2514/6.IAC-06-C4.4.04
N1  - 57th International Astronautical Congress, 02 October 2006 - 06 October 2006, Valencia, Spain.
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Kroll-Ludwigs, Kathrin
ED  - Staake, Marco
T1  - Selbstverantwortung oder Vertrauenshaftung? – Anwendung von § 311 II Nr. 1 BGB (c.i.c.) auf Eheverträge und Angehörigenbürgschaften
T2  - Verantwortung und Haftung : Leipziger Tagung, 6. bis 9. September 2006 ; Jahrbuch Junger Zivilrechtswissenschaftler 2006 ; [17. Tagung der Gesellschaft Junger Zivilrechtswissenschaftler e.V.]
Y1  - 2006
SP  - 118
EP  - 145
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic resistance of unreinforced masonry buildings
T2  - Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...
Y1  - 2006
SN  - 1-905088-06-X
U6  - http://dx.doi.org/10.4203/ccp.83.9
SP  - Paper 9
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - JOUR
A1  - Krebsbach, M.
A1  - Schiller, C.
A1  - Brunner, D.
A1  - Günther, G.
A1  - Hegglin, M. I.
A1  - Mottaghy, Darius
A1  - Riese, M.
A1  - Spelten, N.
A1  - Wernli, H.
T1  - Seasonal cycles and variability of O_3 and H_2O in the UT/LMS during SPURT
JF  - Atmospheric Chemistry and Physics
Y1  - 2006
U6  - http://dx.doi.org/10.5194/acp-6-109-2006
VL  - 6
IS  - 1
SP  - 109
EP  - 125
ER  - 
TY  - GEN
A1  - Junold, Thomas
T1  - Schwarz. Weiss. Ein dokumentierter Schriftentwurf
T1  - Black. White. A commented type design
N2  - Schwarz und Weiß. Schwarze Glyphen, weiße Gegenformen. Schwarze Zeilen, Weißraum als Gestaltungselement. Schwarze Schrift auf weißem Papier. Schrift als Kommunikationselement. Vereinheitlichte und vereinfachte Formen, dank Jahrhunderte langer Gewöhnung oder Experimentierfeld für Formen, die sich mit verändernden Techniken gleichermaßen verändern? Schrift als Vermittler von Emotionen oder reine Information. Was macht eine Schrift lesbar und was steht einer »Display-Schrift« gut zu Gesicht? Sind Schriftsippen mit über hundert Schnitten Anwenderfreundlich oder eher Grund für Verwirrung. Serifenschrift oder Sans-Serif? Was ist moderner? Sind wir Kinder der Helvetica oder der Frutiger oder eher Enkel der Garamond oder Bodoni? Kann man ein ästhetisches Empfinden für Schrift lernen? Eine Schrift als Beweis, ausgebaut für eine sinnvolle Verwendung, hinterfragt durch einen Markt schon während ihrer Entstehung. Rückführung und Begründung der aufgeführten Fragen auf diese Schrift. Ein Diplom, das nachdenkt über Schrift, das Schrift anbietet, den Dialog mit Schrift fordert.
N2  - When asked why there are so many typefaces, Adrian Frutiger used to reply: “Because there is so many wines.” Source: Fontblog Black and white. Black glyphs, white counters. Black lines of text, white space as design element. Black type on white paper. Type as an element of comunication. Unified and simplified forms, that change along ever-changing technology? Typefaces as mediators of emotion or pure information. What makes a typeface readable and what makes a pure display typeface pleasant? Are typeface superfamilies with more that a hundered styles user friendly or a blessing or a curse? Serifed or unserifed? What is more modern? Are we the children of Helvetica or Frutiger, or the grandchildren of Garamond and Bodoni? Can a sensitivity to the power of type be learned? A typeface as a proof, equipped for sensible use, and questioned by the market already during its conception. Feedback and integration of these questions in the typeface. A “diploma” that thinks about type, that offers type, that calls for dialogue with type. By using type, you take responsibility.
KW  - Schriftkunst
KW  - Forum Typografie
KW  - Typographie
KW  - Spiekermann
KW  - Erik
KW  - Actor
KW  - Schrift
KW  - Open Type
KW  - Schriftentwurf
KW  - Fontlab
KW  - actor
KW  - font
KW  - open type
KW  - typedesign
KW  - fontlab
Y1  - 2006
ER  - 
TY  - JOUR
A1  - Krause, Thomas
T1  - Schalung und Gerüste
JF  - Beispiele für die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].
Y1  - 2006
SN  - 978-3-8351-0002-2
N1  - Kapitel 7
SP  - 122
EP  - 131
PB  - Teubner
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Krause, Thomas
A1  - Kremer, Norbert
T1  - Schalung und Gerüste
JF  - Zahlentafeln für den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. überarb. Aufl.
Y1  - 2006
SN  - 3-519-65220-X
N1  - Kapitel 11
SP  - 709
EP  - 747
PB  - Teubner
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Timme, Michael
T1  - Schadensersatzansprüche gegen den Insolvenzverwalter wegen Nichterfüllung von Masseverbindlichkeiten im Prozess
JF  - Monatsschrift für deutsches Recht : MdR ; Zeitschrift für die Zivilrechts-Praxis. 26 (2006), H. 24
Y1  - 2006
SN  - 0340-1812
SP  - 1381
EP  - 1383
ER  - 
TY  - CHAP
A1  - Türk, Roman
T1  - Sanierung von Hausanschlüssen
N2  - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 23-24. Zusammenfassung des Vortrags.
KW  - Hausanschluss
KW  - Abwasser
KW  - Kanalnetz
KW  - Kanalbetrieb
Y1  - 2006
ER  - 
TY  - GEN
A1  - Erk, Daniel
A1  - Klefisch, Andrea
A1  - Stellberg, Michael
A1  - Zimmer, Dirk
T1  - Rückenlehne für einen Fahrzeugsitz
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Retkowitz, Daniel
T1  - Rule-Dependencies for Visual Knowledge Specification in Conceptual Design
N2  - In: Proc. of the 11th Intl. Conf. on Computing in Civil and Building Engineering (ICCCBE-XI) ed. Hugues Rivard, Montreal, Canada, Seite 1-12, ACSE (CD-ROM), 2006 Currently, the conceptual design phase is not adequately supported by any CAD tool. Neither the support while elaborating conceptual sketches, nor the automatic proof of correctness with respect to effective restrictions is currently provided by any commercial tool. To enable domain experts to store the common as well as their personal domain knowledge, we develop a visual language for knowledge formalization. In this paper, a major extension to the already existing concepts is introduced. The possibility to define rule dependencies extends the expressiveness of the knowledge definition language and contributes to the usability of our approach.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2006
ER  - 
TY  - JOUR
A1  - Paschmann, Hans
T1  - Robuste Fertigteile aus Glasfaserbeton
JF  - BFT international : concrete plant + precast technology ; Betonwerk + Fertigteil-Technik . 72 (2006), H. 9
Y1  - 2006
SN  - 0373-4331
N1  - gedruckte Ausgabe in der Bereichsbibliothek Bayernallee vorhanden
SP  - 36
EP  - 43
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Roboterfußball - Wissenschaft, die auch Spass macht / Ferrein, Alexander ; Lakemeyer, Gerhard
JF  - RWTH Themen (2006)
Y1  - 2006
SN  - 0179-079X
SP  - 36
EP  - 39
ER  - 
TY  - BOOK
A1  - Baltzer, Wolfgang
T1  - Richtlinien für die Ausstattung und den Betrieb von Straßentunneln : RABT / Forschungsgesellschaft für Straßen- und Verkehrswesen, Arbeitsgruppe Verkehrsführung und Verkehrssicherheit. [Arbeitsgruppe Verkehrsführung und Verkehrssicherheit, Arbeitsausschuss Ausstattung und Betrieb von Straßentunneln. Leiter: Wolfgang Baltzer]. Ausg. 2006
Y1  - 2006
SN  - 3-937356-87-8
N1  - Forschungsgesellschaft für Straßen- und Verkehrswesen, Arbeitsausschuss Ausstattung und Betrieb von Straßentunneln  	. FGSV; 339
PB  - FGSV-Verl.
CY  - Köln
ER  - 
TY  - CHAP
A1  - Sakthivel, Mariappan
A1  - Weppner, Werner
T1  - Response behaviour of a hydrogen sensor based on ionic conducting polymer-metal interfaces prepared by the chemical reduction method
N2  - A solid-state amperometric hydrogen sensor based on a protonated Nafion membrane and catalytic active electrode operating at room temperature was fabricated and tested. Ionic conducting polymer-metal electrode interfaces were prepared chemically by using the impregnation-reduction method. The polymer membrane was impregnated with tetra-ammine platinum chloride hydrate and the metal ions were subsequently reduced by using either sodium tetrahydroborate or potassium tetrahydroborate. The hydrogen sensing characteristics with air as reference gas is reported. The sensors were capable of detecting hydrogen concentrations from 10 ppm to 10% in nitrogen. The response time was in the range of 10-30 s and a stable linear current output was observed. The thin Pt films were characterized by XRD, Infrared Spectroscopy, Optical Microscopy, Atomic Force Microscopy, Scanning Electron Microscopy and EDAX.
KW  - Biosensor
KW  - Hydrogen sensor
KW  - amperometric sensor
KW  - porous Pt electrode
KW  - chemical reduction method
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1399
ER  - 
TY  - CHAP
A1  - Pauksztat, Anja
A1  - Kuperjans, Isabel
A1  - de Hesselle, M.
T1  - Referenzformeln für Energiebedarf und CO2-Emissionen in der Glasindustrie
T2  - Energieeffizienz - Chancen für die Zukunft : Tagung Berlin, 14. und 15. November 2006. - (VDI-Berichte ; 1951)
Y1  - 2006
SN  - 3-18-091951-5
SP  - 179
EP  - 190
PB  - VDI-Verl.
CY  - Düsseldorf
ET  - Nichtred. Ms.-Dr.
ER  - 
TY  - CHAP
A1  - Kurz, Melanie
T1  - Recognition of shape in virtual visualizations
T2  - Proceedings : November 15 - 17, 2006, Technische Universität Darmstadt, Darmstadt, Germany ; PACE, Partners for the advancement of collaborative engineering education
Y1  - 2006
SN  - 978-3-00-020161-5
N1  - International PACE Forum Collaborative Visualization ; (2006, Darmstadt)
SP  - 203
EP  - 209
PB  - Techn. Univ.
CY  - Darmstadt
ER  - 
TY  - BOOK
A1  - Chwallek, Constanze
A1  - Felden, Birgit
T1  - RatingCheck : Wertschöpfungskette / Chwallek, Constanze ; Felden, Birgit
Y1  - 2006
PB  - Deutscher Sparkassen Verlag
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Rapid Manufacturing - eine interdisziplinäre Strategie
N2  - Als um 1987 ein Verfahren namens Stereolithographie und ein Stereolithography Apparatus (SLA) vorgestellt wurden, war der Traum von der Herstellung beliebiger dreidimensionaler Bauteile direkt aus Computerdaten und ohne bauteilspezifische Werkzeuge Realität geworden. Ein Anwendungs-Szenario wurde gleich mitgeliefert. Diese Technologie würde es möglich machen, die gesamte Ersatzteilversorgung der Amerikanischen Pazifikflotte mittels ein paar dieser Maschinen, umfangreicher Datenstätze und genügend Rohmaterial vor Ort auf einem Flugzeugträger direkt nach Bedarf zu fertigen. Diese Vorstellung definierte schon damals die direkte digitale Fertigung, das Rapid Manufacturing. In der Realität bestanden die mit diesem Verfahren hergestellten Bauteile nur aus Kunststoff, waren ungenau, bruchempfindlich und klebrig und allein in der Produktentwicklung, eben als Prototypen zu benutzen. Sie waren schnell verfügbar, weil zu Ihrer Herstellung keine Werkzeuge benötigt wurden. Folgerichtige und zudem modern hießen sie: Rapid Prototyping. Rapid Prototyping wurde schnell zum Synonym eines neuen Zweiges der Fertigungstechnik, der Generativen Fertigungstechnik. Die weitere Entwicklung brachte neue Verfahren, höhere Genauigkeiten, verbesserte Werkstoffe und neue Anwendungen. Die Herstellung von Negativen, also Werkzeugen, mit dem gleichen Verfahren wurde marketing-getrieben Rapid Tooling genannt und als die ersten Bauteile nicht mehr als Prototypen, sondern als Endprodukte eingesetzt wurden, nannte man dies Rapid Manufacturing - das Ziel war erreicht. War das Ziel wirklich erreicht? Ist es Rapid Manufacturing, wenn ein generativ gefertigtes Bauteil die gewünschte Spezifikation erreicht? Was muss passieren, damit aus dem Phänomen Rapid Prototyping eine Strategie wird, die geeignet ist, einen Paradigmenwechsel von der heutigen Hersteller-induzierten Massenproduktion von Massenartikeln zur Verbraucher-induzierten (und verantworteten) Massenproduktion von Einzelteilen für jedermann ermöglichen und möglicherweise unsere Arbeits- und Lebensformen tiefgreifend zu beeinflussen? Im Beitrag wird der Begriff der (Fertigungs-) Strategie „Rapid Manufacturing“ näher beleuchtet. Es wird diskutiert, welche Maßnahmen auf der technischen und der operative Ebene getroffen werden müssen, damit die generative Fertigungstechnik im Sinne dieser Strategie umgesetzt werden kann. Beispiele belegen, dass diese Entwicklung bereits begonnen hat und geben Anregungen für eine konstruktive Diskussion auf der RapidTech 2006.
N2  - As a process called stereolithography and a stereolithography apparatus (SLA) was presented in 1987, the dream of manufacturing any three-dimensional component directly from computer data and without component-specific tools became reality. An application scenario was supplied at the same time. This technology would make it possible to produce the entire spare parts requirement of the American Pacific Fleet merely through the use of a couple of such machines, extensive datasets and enough raw material on board an aircraft carrier directly as required. This image defined direct digital fabrication, rapid manufacturing, even at that time. In reality, this procedure only managed to produce components in plastic which were imprecise, fragile and sticky and only usable as prototypes in product development. They were rapidly available, because no tools were required for their manufacture. Consequentially, they are now known as Rapid Prototyping in modern jargon. Rapid Prototyping quickly became a synonym for a new branch of production engineering known as generative production engineering. Continued development brought new processes, improved accuracy, improved materials and new applications. The manufacturing of negatives, in other words tools, using the same procedure was quickly named rapid tooling by the marketing sector, and once the first components were used as final products instead of just prototypes the process was renamed "rapid manufacturing" - the goal had been reached. Was the goal really reached? Is it rapid manufacturing if a generatively manufactured component reaches the required specifications? What has to happen so that the rapid prototyping phenomenon becomes a strategy which is suitable for enabling the paradigm change from current manufacture-induced mass production of mass articles to consumer-induced (and consumer-responsible) mass production of single parts for anyone, and in all possibility makes dramatic changes in our way of working and living? The lecture includes detailed information about the (production) strategy term "rapid manufacturing". We will be discussing which measures need to be taken on the technical and operative level so that generative production engineering can be implemented in the sense of this strategy. Examples will show that this development has already started, and should provoke stimulation leading to constructive discussion during RapidTech 2006.
KW  - Rapid prototyping
KW  - Rapid Manufacturing
KW  - Rapid Prototyping
KW  - Stereolithographie
KW  - Generative Fertigungstechnik
KW  - Rapid prototyping
KW  - rapid manufacturing
Y1  - 2006
ER  - 
TY  - JOUR
A1  - Hillgärtner, Michael
A1  - Kappel, U.
T1  - Radiating Impedance of Mains Cabling During Emissions Testing
JF  - EMC Europe 2006 Barcelona : International Symposium on Electromagnetic Compatibility; September 4 - 8, 2006, Campus Nord, Technical University of Catalonia, Barcelona, Spain / [organized by Technical University of Catalonia (UPC) ... Ed. and publ. by: Ferran Silva ...]. - Vol. 1: Proceedings 1
Y1  - 2006
SN  - 84-689-9439-1
N1  - EMC Europe <7,2006,Barcelona>; International Symposium on Electromagnetic Compatibility <7, 2006, Barcelona>
SP  - 17
EP  - 22
CY  - Barcelona
ER  - 
TY  - CHAP
A1  - Mirmohseni, Abdolreza
A1  - Rostamizadeh, Kobra
T1  - Quartz crystal nanobalance in conjunction with principal component analysis for  identification of volatile organic compounds
N2  - Quartz crystal nanobalance (QCN) sensors are considered as powerful masssensitive sensors to determine materials in the sub-nanogram level. In this study, a single piezoelectric quartz crystal nanobalance modified with polystyrene was employed to detect benzene, toluene, ethylbenzene and xylene (BTEX compounds). The frequency shift of the QCN sensor was found to be linear against the BTEX compound concentrations in the range about 1-45 mg l-1. The correlation coefficients for benzene, toluene, ethylbenzene, and xylene were 0.991, 0.9977, 0.9946 and 0.9971, respectively. The principal component analysis was also utilized to process the frequency response data of the single piezoelectric crystal at different times, considering to the different adsorption-desorption dynamics of BTEX compounds. Using principal component analysis, it was found that over 90% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful identification of benzene and toluene was possible through the principal component analysis of the transient responses of the polystyrene modified QCN sensor. The results showed that the polystyrene-modified QCN had favorable identification and quantification performances for the BTEX compounds.
KW  - Biosensor
KW  - Quartz crystal nanobalance (QCN)
KW  - BTEX compounds
KW  - principal component
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1434
ER  - 
TY  - JOUR
A1  - Heger, Michael
T1  - Qualitätsentwicklung des wissenschaftlichen Service. Ansatz und Erfahrungen der Hochschuldidaktik und Studienberatung - Fachhochschule Aachen 2006
JF  - Qualitätsentwicklung an Hochschulen : Erfahrungen und Lehren aus 10 Jahren Evaluation ; Dokumentation zur gleichnamigen Veranstaltung des Projekts Qualitätssicherung der HRK am 3. und 4. November 2005 im Bonner Wissenschaftszentrum / [HRK, Hochschulrektorenkonferenz. Herbsttagung "Qualitätsentwicklung an Hochschulen, Erfahrungen und Lehren aus 10 Jahren Evaluation. Red.: Jörn Alphei ...]
Y1  - 2006
N1  - Beiträge zur Hochschulpolitik ; 2006,8
SP  - 92
EP  - 97
PB  - HRK, Hochschulrektorenkonferenz
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
A1  - Lakemeyer, Gerhard
T1  - Qualitative World Models for Soccer Robots / Schiffer, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard
JF  - Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan Wölfl ... (eds.)
Y1  - 2006
SN  - 3-88722-666-6
SP  - 3
EP  - 14
PB  - Univ.
CY  - Bremen
ER  - 
TY  - CHAP
A1  - Platen, J.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Präparation von selbstjustierenden Nanostrukturen mittels Schichtausdehnungstechnik
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 277
EP  - 280
PB  - VDE Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
T1  - Progress of the manual application of adhesives
T2  - Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China
Y1  - 2006
SP  - 275
EP  - 277
PB  - Beijing Adhesion Society of China
CY  - Beijing
ER  - 
TY  - BOOK
A1  - Havermann, Marc
A1  - Seiler, F.
A1  - George, A.
A1  - Srulijes, J.
T1  - Progress in doppler picture velocimetry (DPV) technique : 12th International Symposium on Flow Visualization, DLR, Göttingen, September 10 - 14, 2006 / Institut Franco-Allemand de Recherches de Saint-Louis. Seiler, F. ...
Y1  - 2006
N1  - Publication / Institut Franco-Allemand de Recherches de Saint Louis ; 624
PB  - ISL
CY  - Saint-Louis
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability. - Überarb. Ausg.
N2  - In: Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in Jülich, 21-24 November 1994. - Vienna , 1996. - Seite: 43 - 55 IAEA-TECDOC-920 Abstract: It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demon­strated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several addi­tional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings.
KW  - Bruchmechanik
KW  - probabilistic fracture mechanics
KW  - PFM
Y1  - 2006
ER  - 
TY  - JOUR
A1  - Glaser, Markus
A1  - Schmitz, Philipp
T1  - Privatanleger am Optionsscheinmarkt
Y1  - 2006
SP  - 1
EP  - 46
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Preface of the Special Issue of I3S 2005 in Jülich (Germany)
N2  - International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220
KW  - Biosensor
KW  - I3S 2005
KW  - International Symposium on Sensor Science
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1365
ER  - 
TY  - JOUR
A1  - Heger, Michael
A1  - Thumser, Katrin
A1  - Kroeber, Edith
T1  - Praxisbegleitende Beratung im Rahmen hochschuldidaktischer Weiterbildung / Thumser, Katrin ; Kroeber, Edith ; Heger, Michael
JF  - Consulting, Coaching, Supervision : eine Einführung in Formate und Verfahren hochschuldidaktischer Beratung / AHD, Arbeitsgemeinschaft für Hochschuldidaktik. Johannes Wildt... (Hrsg.)
Y1  - 2006
SN  - 3-7639-3428-6
N1  - Blickpunkt Hochschuldidaktik ; 117
SP  - 68
EP  - 80
PB  - Bertelsmann
CY  - Bielefeld
ER  - 
TY  - CHAP
A1  - Vredal, Andreas
A1  - Wollert, Jörg
T1  - Praktische Untersuchungen zur Reduzierung der Restfehlerrate von Funksystemen
T2  - Wireless Automation : Chancen, Lösungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)
Y1  - 2006
SN  - 3-18-091939-6
SP  - 135
EP  - 146
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Praktische Untersuchungen zum zeitlichen Übertragungs- und Bündelfehlerverhalten der IEEE 802.15.4
T2  - ZigBee & Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, München
Y1  - 2006
PB  - Design&Elektronik
CY  - Poing
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Baturkin, Volodymyr
A1  - Coverstone, Victoria L.
A1  - Dietrich, Benjamin
A1  - Garbe, Gregory P.
A1  - Görlich, Marianne
A1  - Leipold, Manfred
A1  - Lura, Franz
A1  - Macdonald, Malcolm
A1  - McInnes, Colin R.
A1  - Mengali, Giovanni
A1  - Quatra, Alessandro A.
A1  - Rios-Reyes, Leonel
A1  - Scheeres, Daniel J.
A1  - Seboldt, Wolfgang
A1  - Wie, Bong
T1  - Potential Effects of Optical Solar Sail Degradation on Interplanetary Trajectory Design
JF  - Astrodynamics 2005 : proceedings of the AAS/AIAA astrodynamics conference held August 7 - 11, 2005, South Lake Tahoe, California / ed. by Bobby G. Williams. - Pt. 3. - (Advances in the astronautical sciences ; 123,3)
Y1  - 2006
UR  - http://www.spacesailing.net/paper/200508_LakeTahoe_Dachwald+.pdf
SN  - 0-87703-527-X
N1  - Astrodynamics Conference <2005, South Lake Tahoe, Calif.> ; American Astronautical Society ; Number: AAS-05-413
SP  - 2569
EP  - 2592
PB  - Univelt
CY  - San Diego, Calif.
ER  - 
TY  - JOUR
A1  - Naujokat, Anke
T1  - Politikum Betonsanierung : das Beispiel der Münsterschule in Neuss
JF  - Bauwelt. 97  (2006), H. 3
Y1  - 2006
SN  - 0931-6590
SP  - 18
EP  - 21
ER  - 
TY  - JOUR
A1  - Kloock, Joachim P.
A1  - Moreno, Lia
A1  - Bratov, A.
A1  - Huachupoma, S.
A1  - Xu, J.
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Ermolenko, Y.
A1  - Vlasov, Y. G.
A1  - Schöning, Michael Josef
T1  - PLD-prepared cadmium sensors based on chalcogenide glasses —ISFET, LAPS and &#956;ISE semiconductor structures
JF  - Sensors and Actuators B: Chemical. 118 (2006), H. 1-2
Y1  - 2006
SN  - 0925-4005
N1  - Eurosensors XIX - Eurosensors XIX - The 19th European Conference on Solid-State Transducers
SP  - 149
EP  - 155
ER  - 
TY  - CHAP
A1  - Augenstein, Eckardt
A1  - Herbergs, S.
A1  - Kuperjans, Isabel
T1  - Planung und Bewertung der Gebäudeenergieversorgung mit TOP-Energy
T2  - Heizungs- und Raumlufttechnik : 1. Fachtagung Leonberg, 31. Januar bis 1. Februar 2006. - (VDI-Berichte ; Nr. 1921)
Y1  - 2006
SN  - 3-18-091921-3
N1  - Posterbeitrag
SP  - 57
EP  - 60
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Kretschmann, Lars
T1  - Planung und Bauleitung Buschtunnel Aachen
N2  - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 16-17 Der Umbau des Aachener Buschtunnels im Rahmen des europäischen Hochgeschwindigkeitsschienennetzes wird im sogenannten "Neuen Österreichischen Tunnelbauverfahren (NOeT)", also ein Ausbau in Kalotte, Strosse und Sohle durchgeführt.
KW  - Bauplanung
KW  - Bauführung
KW  - Bauleitung
KW  - Tunnelbau
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Gobbelé, Dirk
T1  - Planung der Umbaumaßnahme Hauptbahnhof Aachen
N2  - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 13-15. Bericht über die infrastrukturellen Maßnahmen zum Umbau des Hauptbahnhofs Aachen.
KW  - Bauplanung
KW  - Umbauplanung
KW  - Verkehrsbau
KW  - Hauptbahnhof Aachen
Y1  - 2006
ER  - 
TY  - BOOK
A1  - Havermann, Marc
T1  - PIV measurements of compressible vortex rings generated by a shock tube : 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, PT, 26-29.06.2006; axe de recherches 2.14 / Haertig, J.; Rey, C.; Havermann, M. Institut Franco-Allemand de Recherches de Saint-Louis
Y1  - 2006
N1  - Publication / Institut Franco-Allemand de Recherches de Saint Louis ; 645
PB  - ISL
CY  - Saint-Louis
ER  - 
TY  - BOOK
A1  - Havermann, Marc
T1  - PIV measurements in shock tunnels : PivNet 2, Final Workshop, Göttingen, 07. - 08.09.2006
Y1  - 2006
N1  - Publication / Institut Franco-Allemand de Recherches de Saint Louis ; 644
PB  - ISL
CY  - Saint-Louis
ER  - 
TY  - CHAP
A1  - Himmerich, Jörg
T1  - Pipeline Integrity Management System - Probabilistische Bewertung von Bauwerken am Beispiel von Hochdruckleitungen
N2  - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 21-22. Zusammenfassung des Vortrags.
KW  - Hochdruckleitung
KW  - PIMS
KW  - Pipeline Integrity Management System
Y1  - 2006
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Koshitz, I. N.
A1  - Svetlowa, O. V.
A1  - Zaseeva, M. V.
T1  - Physiological principles of hypotensive therapy of open-angle glaucoma during presbyopic period. Part II Promising algorithms of practical sparing applications / Koshitz, I. N. ; Svetlova, O. V. ; Zaseeva, M. V. ; Shuhaev, S. V. ; Makarov, F. N. ; Kotliar
JF  - Glaukoma (2006)
Y1  - 2006
N1  - Original in Russisch
SP  - 51
EP  - 70
PB  - -
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Koshitz, I. N.
A1  - Svetlova, O. V.
A1  - Zaseeva, M. V.
T1  - Physiological principles of hypotensive therapy of open-angle glaucoma during presbyopic period. Part I Initial theoretical presuppositions, hypotheses and facts / Koshitz, I. N. ; Svetlova, O. V. ; Zaseeva, M. V. ; Shuhaev, S. V. ; Makarov, F. N. ; Kotli
JF  - Glaukoma (2006)
Y1  - 2006
N1  - Original in Russisch
SP  - 35
EP  - 53
PB  - -
ER  -