TY  - BOOK
ED  - Ley, Wilfried
ED  - Hallmann, Willi
ED  - Wittmann, Klaus
T1  - Handbuch der Raumfahrttechnik
Y1  - 2019
SN  - 978-3-446-45429-3
N1  - gedruckt in der Bereichsbibliothek Eupener Str. vorhanden
PB  - Hanser
CY  - München
ET  - 5. Auflage
ER  - 
TY  - BOOK
ED  - Wolf, Martin R.
ED  - Barton, Thomas
ED  - Herrmann, Frank
ED  - Meister, Vera G.
ED  - Müller, Christian
ED  - Seel, Christian
T1  - Angewandte Forschung in der Wirtschaftsinformatik
BT  - Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule für Angewandte Wissenschaften Aachen
Y1  - 2019
SN  - 978-3-944330-62-4
N1  - Buch ist in der Bereichsbibliothek Eupener Str. vorhanden. Signatur: 21 QGT 95-2019
PB  - Mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Abbas, Karim
A1  - Thurn, Laura
A1  - Kessler, Julia
A1  - Eichler, Fabian
T1  - Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901009
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01009
ER  - 
TY  - JOUR
A1  - Achtsnicht, Stefan
A1  - Neuendorf, Christian
A1  - Faßbender, Tobias
A1  - Nölke, Greta
A1  - Offenhäusser, Andreas
A1  - Krause, Hans-Joachim
A1  - Schröper, Florian
T1  - Sensitive and rapid detection of cholera toxin subunit B using magnetic frequency mixing detection
JF  - Plos One
N2  - Cholera is a life-threatening disease caused by the cholera toxin (CT) as produced by some Vibrio cholerae serogroups. In this research we present a method which directly detects the toxin’s B subunit (CTB) in drinking water. For this purpose we performed a magnetic sandwich immunoassay inside a 3D immunofiltration column. We used two different commercially available antibodies to capture CTB and for binding to superparamagnetic beads. ELISA experiments were performed to select the antibody combination. The beads act as labels for the magnetic frequency mixing detection technique. We show that the limit of detection depends on the type of magnetic beads. A nonlinear Hill curve was fitted to the calibration measurements by means of a custom-written python software. We achieved a sensitive and rapid detection of CTB within a broad concentration range from 0.2 ng/ml to more
than 700 ng/ml.
Y1  - 2019
U6  - http://dx.doi.org/10.1371/journal.pone.0219356
SN  - 1932-6203
VL  - 14
IS  - 7
PB  - Plos
CY  - San Francisco
ER  - 
TY  - JOUR
A1  - Achtsnicht, Stefan
A1  - Pourshahidi, Ali Mohammad
A1  - Offenhäusser, Andreas
A1  - Krause, Hans-Joachim
T1  - Multiplex detection of different magnetic beads using frequency scanning in magnetic frequency mixing technique
JF  - Sensors
N2  - In modern bioanalytical methods, it is often desired to detect several targets in one sample within one measurement. Immunological methods including those that use superparamagnetic beads are an important group of techniques for these applications. The goal of this work is to investigate the feasibility of simultaneously detecting different superparamagnetic beads acting as markers using the magnetic frequency mixing technique. The frequency of the magnetic excitation field is scanned while the lower driving frequency is kept constant. Due to the particles’ nonlinear magnetization, mixing frequencies are generated. To record their amplitude and phase information, a direct digitization of the pickup-coil’s signal with subsequent Fast Fourier Transformation is performed. By synchronizing both magnetic beads using frequency scanning in magnetic frequency mixing technique magnetic fields, a stable phase information is gained. In this research, it is shown that the amplitude of the dominant mixing component is proportional to the amount of superparamagnetic beads inside a sample. Additionally, it is shown that the phase does not show this behaviour. Excitation frequency scans of different bead types were performed, showing different phases, without correlation to their diverse amplitudes. Two commercially available beads were selected and a determination of their amount in a mixture is performed as a demonstration for multiplex measurements.
KW  - frequency mixing magnetic detection
KW  - magnetic sandwich immunoassay
KW  - multiparametric immunoassays
Y1  - 2019
U6  - http://dx.doi.org/10.3390/s19112599
SN  - 1424-8220
VL  - 19
IS  - 11
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Achtsnicht, Stefan
A1  - Schönenborn, Kristina
A1  - Offenhäusser, Andreas
A1  - Krause, Hans-Joachim
T1  - Measurement of the magnetophoretic velocity of different superparamagnetic beads
JF  - Journal of Magnetism and Magnetic Materials
N2  - The movement of magnetic beads due to a magnetic field gradient is of great interest in different application fields. In this report we present a technique based on a magnetic tweezers setup to measure the velocity factor of magnetically actuated individual superparamagnetic beads in a fluidic environment. Several beads can be tracked simultaneously in order to gain and improve statistics. Furthermore we show our results for different beads with hydrodynamic diameters between 200 and 1000 nm from diverse manufacturers. These measurement data can, for example, be used to determine design parameters for a magnetic separation system, like maximum flow rate and minimum separation time, or to select suitable beads for fixed experimental requirements.
KW  - magnetophoretic velocity
KW  - superparamagnetic bead
KW  - magnetic tweezers
KW  - magnetic separation
KW  - magnetic actuation
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.jmmm.2018.10.066
SN  - 0304-8853
VL  - 477
IS  - 1
SP  - 244
EP  - 248
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Achtsnicht, Stefan
A1  - Tödter, Julia
A1  - Niehues, Julia
A1  - Telöken, Matthias
A1  - Offenhäusser, Andreas
A1  - Krause, Hans-Joachim
A1  - Schröper, Florian
T1  - 3D printed modular immunofiltration columns for frequency mixing-based multiplex magnetic immunodetection
JF  - Sensors
N2  - For performing point-of-care molecular diagnostics, magnetic immunoassays constitute a promising alternative to established enzyme-linked immunosorbent assays (ELISA) because they are fast, robust and sensitive. Simultaneous detection of multiple biomolecular targets from one body fluid sample is desired. The aim of this work is to show that multiplex magnetic immunodetection based on magnetic frequency mixing by means of modular immunofiltration columns prepared for different targets is feasible. By calculations of the magnetic response signal, the required spacing between the modules was determined. Immunofiltration columns were manufactured by 3D printing and antibody immobilization was performed in a batch approach. It was shown experimentally that two different target molecules in a sample solution could be individually detected in a single assaying step with magnetic measurements of the corresponding immobilization filters. The arrangement order of the filters and of a negative control did not influence the results. Thus, a simple and reliable approach to multi-target magnetic immunodetection was demonstrated.
Y1  - 2019
U6  - http://dx.doi.org/10.3390/s19010148
SN  - 1424-8220
VL  - 19
IS  - 1
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Albanna, Walid
A1  - Lüke, Jan Niklas
A1  - Schubert, Gerrit Alexander
A1  - Dibué-Adjei, Maxine
A1  - Kotliar, Konstantin
A1  - Hescheler, Jürgen
A1  - Clusmann, Hans
A1  - Steiger, Hans-Jakob
A1  - Hänggi, Daniel
A1  - Kamp, Marcel A.
A1  - Schneider, Toni
A1  - Neumaier, Felix
T1  - Modulation of Ca v 2.3 channels by unconjugated bilirubin (UCB) – Candidate mechanism for UCB-induced neuromodulation and neurotoxicity
JF  - Molecular and Cellular Neuroscience
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.mcn.2019.03.003
SN  - 1044-7431
VL  - 96
IS  - 4
SP  - 35
EP  - 46
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Efficient Hashing Algorithm for NN Problem in HD Spaces
T2  - Lecture Notes in Computer Science
Y1  - 2019
SN  - 978-303005498-4
U6  - http://dx.doi.org/10.1007/978-3-030-05499-1_6
N1  - 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018; Funchal; Portugal; 16 January 2018 through 18 January 2018; Code 222779
SP  - 101
EP  - 115
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Optimized Method for 3D Body Scanning Applications Based on KinectFusion
T2  - Communications in Computer and Information Science
Y1  - 2019
U6  - http://dx.doi.org/10.1007/978-3-030-29196-9_6
SN  - 1865-0929
N1  - 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; Funchal; Portugal; 19 January 2018 through 21 January 2018
VL  - 1024
SP  - 100
EP  - 113
PB  - Springer
ER  - 
TY  - JOUR
A1  - Arreola, Julio
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Toward an immobilization method for spore-based biosensors in oxidative environment
JF  - Electrochimica Acta
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.electacta.2019.01.148
VL  - 302
SP  - 394
EP  - 401
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Arreola, Julio
A1  - Keusgen, Michael
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Combined calorimetric gas- and spore-based biosensor array for online monitoring and sterility assurance of gaseous hydrogen peroxide in aseptic filling machines
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bios.2019.111628
SN  - 0956-5663
VL  - 143
IS  - 111628
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Attar, Mandana Hossein Zadeh
A1  - Merk, Hans F.
A1  - Kotliar, Konstantin
A1  - Wurpts, Gerda
A1  - Röseler, Stefani
A1  - Moll-Slodowy, Silke
A1  - Plange, Johann
A1  - Baron, Jens Malte
A1  - Balakirski, Galina
T1  - The CD63 basophil activation test as a diagnostic tool for assessing autoimmunity in patients with chronic spontaneous urticaria
JF  - European Journal of Dermatology
Y1  - 2019
U6  - http://dx.doi.org/10.1684/ejd.2019.3680
VL  - 29
IS  - 6
SP  - 614
EP  - 618
ER  - 
TY  - CHAP
A1  - Auth, Gunnar
A1  - Czarnecki, Christian
A1  - Bensberg, Frank
ED  - Draude, Claude
ED  - Lange, Martin
ED  - Sick, Bernhard
ED  - Gesellschaft für Informatik e.V. (GI), 
T1  - Impact of robotic process automation on enterprise architectures
T2  - GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beiträge
N2  - The initial idea of Robotic Process Automation (RPA) is the automation of business processes through the presentation layer of existing application systems. For this simple emulation of user input and output by software robots, no changes of the systems and architecture is required. However, considering strategic aspects of aligning business and technology on an enterprise level as well as the growing capabilities of RPA driven by artificial intelligence, interrelations between RPA and Enterprise Architecture (EA) become visible and pose new questions. In this paper we discuss the relationship between RPA and EA in terms of perspectives and implications. As workin- progress we focus on identifying new questions and research opportunities related to RPA and EA.
KW  - Robotic Process Automation
KW  - Enterprise Architecture
KW  - Software Robots
Y1  - 2019
SN  - 9783885796893
U6  - http://dx.doi.org/10.18420/inf2019_ws05
SN  - 1617-5468
N1  - 50 Jahre Gesellschaft für Informatik – Informatik für Gesellschaft. 16. September, Kassel
SP  - 59
EP  - 65
PB  - Köllen
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Auth, Gunnar
A1  - Czarnecki, Christian
A1  - Bensberg, Frank
A1  - Thor, Andreas
ED  - Barton, Thomas
ED  - Müller, Christian
ED  - Seel, Christian
T1  - Digitalisierung des Forschungsprozesses aus Sicht von Forschenden – durch Serviceintegration zum persönlichen Forschungsinformationssystem
T2  - Hochschulen in Zeiten der Digitalisierung : Lehre, Forschung und Organisation
N2  - In der Diskussion über die Digitalisierung der Forschung spielt die Frage nach der optimalen IT-Unterstützung für Forschende eine wichtige Rolle. Forschende können heute an ihren Hochschulen bzw. Wissenschaftseinrichtungen auf ein breites Angebot interner IT-Dienstleistungen zurückgreifen, das auch kooperative IT-Dienste umfasst, die von mehreren Institutionen in Zusammenarbeit bereitgestellt werden. Außerhalb der eigenen Organisation und des weiteren Verbunds hat sich im Internet zudem ein breites externes Angebot an innovativen, häufig kostenlos nutzbaren Onlinediensten entwickelt. Neben horizontalen Onlinediensten, die sich prinzipiell an jeden Internetnutzer richten (bspw. Dropbox, Twitter, WhatsApp), nimmt auch die Zahl von vertikalen Diensten für wissenschaftliche bzw. Forschungszwecke immer weiter zu (bspw. GoogleScholar, ResearchGate, figshare). Für Forschende eröffnen sich damit vielfältige neue Möglichkeiten, ihren individuellen Forschungsprozess durch digitale Werkzeuge zu verbessern. Aufgrund rechtlicher, technischer und personeller Restriktionen können jedoch interne Dienstleister bei der Identifizierung, Auswahl und Nutzung externer Onlinedienste nur wenig Unterstützung leisten. Aus einer serviceorientierten Perspektive stehen Forschende zunehmend vor dem Problem, wie sich heterogene IT-Dienste interner und externer Anbieter in den eigenen Forschungsprozess integrieren lassen. Als Lösungsansatz skizziert das Kapitel das Konzept eines persönlichen Forschungsinformationssystems
nach Gesichtspunkten eines digitalen Servicesystems.
KW  - Digitalisierung
KW  - Forschung
KW  - Forschungsprozess
KW  - Forschungsinformationssystem
KW  - Serviceintegration
Y1  - 2019
SN  - 978-3-658-26617-2 (Print)
SN  - 978-3-658-26618-9 (Online)
U6  - http://dx.doi.org/10.1007/978-3-658-26618-9_17
SP  - 287
EP  - 307
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Azar, Fouad
A1  - Digel, Ilya
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Utilization of fluorescence spectroscopy and neural networks in clinical analysis
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - Fluorescence topography of human urine in combination with learning algorithms can provide a variant pattern recognition method in analytical clinical chemistry and, eventually, diagnosis.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - http://dx.doi.org/10.17185/duepublico/48750
SP  - 40
EP  - 41
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Baader, Fabian
A1  - Keller, Denis
A1  - Lehmann, Raphael
A1  - Gerber, Lukas
A1  - Reiswich, Martin
A1  - Dachwald, Bernd
A1  - Förstner, Roger
T1  - Operating melting probes for ice penetration under sublimation  conditions and in reduced gravity on a sounding rocket
T2  - Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research
Y1  - 2019
SN  - 0379-6566
N1  - 24th PAC Symposium 2019
ER  - 
TY  - JOUR
A1  - Baringhaus, Ludwig
A1  - Gaigall, Daniel
T1  - On an asymptotic relative efficiency concept based on expected volumes of confidence regions
JF  - Statistics - A Journal of Theoretical and Applied Statistic
N2  - The paper deals with an asymptotic relative efficiency concept for confidence regions of multidimensional parameters that is based on the expected volumes of the confidence regions. Under standard conditions the asymptotic relative efficiencies of confidence regions are seen to be certain powers of the ratio of the limits of the expected volumes. These limits are explicitly derived for confidence regions associated with certain plugin estimators, likelihood ratio tests and Wald tests. Under regularity conditions, the asymptotic relative efficiency of each of these procedures with respect to each one of its competitors is equal to 1. The results are applied to multivariate normal distributions and multinomial distributions in a fairly general setting.
KW  - Volume of confidence regions
KW  - asymptotic relative efficiency
KW  - likelihood ratio test
KW  - multivariate normal distribution
KW  - multinomial distribution
Y1  - 2019
U6  - http://dx.doi.org/10.1080/02331888.2019.1683560
SN  - 1029-4910
VL  - 53
IS  - 6
SP  - 1396
EP  - 1436
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Jänsch, Vanessa K.
T1  - Forschendes Lernen und Studienerfolg: Die Bedeutung epistemischer Neugier
T2  - Forschendes Lernen in der Studieneingangsphase: Empirische Befunde, Fallbeispiele und individuelle Perspektiven
N2  - Forschendes Lernen ist dazu geeignet, epistemische Neugier – definiert als Freude an neuen Erkenntnissen - anzuregen und zu befriedigen. Neben der Selbstwirksamkeit zeigt sich die Neugier als relevant für den Studienerfolg. Allerdings ist bisher nicht geklärt, in welcher Beziehung diese beiden Konstrukte zueinanderstehen.
KW  - Epistemische Neugier
KW  - intrinsische Motivation
KW  - Selbstwirksamkeit
Y1  - 2019
SN  - 978-3-658-25312-7
U6  - http://dx.doi.org/10.1007/978-3-658-25312-7_6
SP  - 99
EP  - 109
PB  - Springer VS
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Bartella, Alexander K.
A1  - Kamal, Mohammad
A1  - Scholl, Ingrid
A1  - Schiffer, Stefan
A1  - Steegmann, Julius
A1  - Ketelsen, Dominik
A1  - Hölzle, Frank W.
A1  - Lethaus, Bernd
T1  - Virtual reality in preoperative imaging in maxillofacial surgery: implementation of “the next level”?
JF  - British Journal of Oral and Maxillofacial Surgery
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bjoms.2019.02.014
SN  - 0266-4356
VL  - 57
IS  - 7
SP  - 644
EP  - 648
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Bayer, Robin
A1  - Hescheler, Jürgen
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Treating arterial hypertension in a cell culture well
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH AachenW
N2  - Hypertension describes the pathological increase of blood pressure, which is most commonly associated with the increase of vascular wall stiffness [1]. Referring to the “Deutsche Bluthochdruck Liga” this pathology shows a growing trend in our aging society. In order to find novel pharmacological and probably personalized treatments, we want to present a functional approach to study biomechanical properties of a human aortic vascular model.
In this method review we will give an overview of recent studies which were carried out with the CellDrum technology [2] and underline the added value to already existing standard procedures known from the field of physiology.
Herein described CellDrum technology is a system to measure functional mechanical properties of cell monolayers and thin tissue constructs in-vitro. Additionally, the CellDrum enables to elucidate the mechanical response of cells to pharmacological drugs, toxins and vasoactive agents. Due to its highly flexible polymer support, cells can also be mechanically stimulated by steady and cyclic biaxial stretching.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - http://dx.doi.org/10.17185/duepublico/48750
SP  - 5
EP  - 6
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Becker, Willi
A1  - Wolf, Martin
T1  - Entwicklung eines Einführungskonzepts für IT-Service-Management in KMU
T2  - Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian Müller, Christian Seel
N2  - Obwohl es eine Vielzahl von Einführungskonzepten für ITSM gibt, hat sich bisher keines dieser Konzepte auf breiter Linie durchgesetzt. Das gilt in erhöhtem Maße für ITSM-Einführungskonzepte für KMU, wohl nicht zuletzt aufgrund der Tatsache, dass der Mehrwert von ITSM für KMU aufgrund der geringeren Größe der IT-Organisationen nur entsprechend schwieriger generiert werden kann.
Mit diesem Beitrag wird ein Einführungskonzept für ITSM in KMU systematisch hergeleitet. Dafür wurden zunächst die Treiber und Barrieren von ITSM untersucht, um daraus ein umfassendes Wirkmodell zu entwickeln. Da mit diesem Wirkungsmodell die Einflussfaktoren auf den Erfolg von ITSM in KMU deutlich werden, konnte auf dieser Basis ein Einführungskonzept abgeleitet werden, welches insbesondere die positiven Effekte unterstützt bzw.
verstärkt.
Y1  - 2019
SN  - 978-3-944330-62-4
SP  - 129
EP  - 137
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - THES
A1  - Beckmann, Nils
T1  - Characterization of the hydrogen-dry-low-Nox-micromix-combustion-principle for hydrogen-methane fuel mixtures
KW  - Low NOx
KW  - Hydrogen
KW  - Combustion
KW  - Low emission
Y1  - 2019
N1  - Dissertation, RMIT University, August 2019
PB  - RMIT University
CY  - Melbourne
ER  - 
TY  - CHAP
A1  - Bedbur, Christian
A1  - Thull, J.
A1  - Moorkamp, Wilfried
A1  - Uibel, Thomas
T1  - Standardbrücken für Geh- und Radwege
T2  - Tagungsband 4. Aachener Holzbautagung 2019: 12. und 13. September an der FH Aachen
Y1  - 2020
SN  - 2197-4489
SP  - 34
EP  - 45
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Bensberg, Frank
A1  - Buscher, Gandalf
A1  - Czarnecki, Christian
ED  - Nissen, Volker
T1  - Digital transformation and IT topics in the consulting industry: a labor market perspective
T2  - Advances in consulting research : recent findings and practical cases
N2  - Information technologies, such as big data analytics, cloud computing,
cyber physical systems, robotic process automation, and the internet of things, provide a sustainable impetus for the structural development of business sectors as well as the digitalization of markets, enterprises, and processes. Within the consulting industry, the proliferation of these technologies opened up the new segment of digital transformation, which focuses on setting up, controlling, and implementing projects for enterprises from a broad range of sectors. These recent developments raise the question, which requirements evolve for IT consultants as important success factors of those digital transformation projects. Therefore, this empirical contribution provides indications regarding the qualifications and competences necessary for IT consultants in the era of digital transformation from a labor market perspective. On the one hand, this knowledge base is interesting for the academic education of consultants, since it supports a market-oriented design of adequate training measures. On the other hand, insights into the competence requirements for consultants are considered relevant for skill and talent management processes in consulting practice. Assuming that consulting companies pursue a strategic human resource management approach, labor market information may also be useful to discover strategic behavioral patterns.
Y1  - 2019
SN  - 978-3-319-95998-6
SN  - 978-3-030-07125-7
SN  - 978-3-319-95999-3
U6  - http://dx.doi.org/10.1007/978-3-319-95999-3_16
SP  - 341
EP  - 357
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Bergmann, Kevin
A1  - Gräbener, Josefine
A1  - Wild, Dominik
A1  - Ulfers, H.
A1  - Czupalla, Markus
T1  - Study on thermal stabilization of a GEO-stationary telescope baffling system by integral application of phase change material
T2  - International Conference on Environmental Systems
N2  - The utilization of phase change material (PCM) for latent heat storage and thermal control of spacecraft has been demonstrated in the past in few missions only. One limiting factor was the fact that all concepts developed so far envisioned the PCM to be applied as an additional capacitor, encapsulated in its own housing, leading to mass, efficiency and accommodation challenges. Recently, the application of PCM within the scan cavity of a GEOS type satellite has been suggested, in order to tackle thermal issues due to direct sun intrusion (Choi, M., 2014). However, the application of PCM in such complex mechanical structures is extremely challenging. A new concept to tackle this issue is currently under development at the FH Aachen University of Applied Sciences. The concept "Infused Thermal Solutions (ITS)" is based on the idea to 3D print metallic structures in their regular functional shape, but double walled with internal lattice support structures, allowing the infusion of a PCM layer directly into the voids and eliminating the need for additional parts and interfaces. Together with OHB System, FH Aachen theoretically studied the application of this technology to the Meteosat Third Generation (MTG) Infra-Red Sounder (IRS) instrument. The study focuses on the scan cavity and entrance baffling assembly (EBA) of the IRS. It consists of thermal analyses, 3D-redesign and bread boarding of a scaled and PCM infused EBA version. In the thermal design of the alternative EBA, PCM was applied directly into the EBA, simulating the worst hot case sun intrusion of the mission. By applying 4kg of PCM (to a 60kg baffle) the EBA temperature excursions during sun intrusion were limited from 140K to 30K, leading to a significant thermo-opto-elastic performance gain. This paper introduces the ITS concept development status.
Y1  - 2019
N1  - 49th International Conference on Environmental Systems, 7-11 July 2019, Boston, Massachusetts ; ICES-2019-72
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Bertsch, Timo
A1  - Meinecke, Matthias
A1  - Wolf, Martin
A1  - Schmunk, Karina
T1  - Smart-Living-Services nur gegen Daten? Process-Mining als Möglichkeit zur Steigerung der Akzeptanz!
T2  - Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian Müller, Christian Seel
N2  - Seit Jahren etablieren sich Technologien in unserem Alltag, die mit Hilfe von smarten Komponenten neue Services und Vernetzungsmöglichkeiten schaffen. Dieses Paper beschreibt die Ergebnisse einer Studie, die die Akzeptanz von IoT-gestützten, smarten Services im privaten Umfeld untersucht. Dabei wird eine zentrale Datenverarbeitung mit automatisierter Erstellung smarter Services der dezentralen Datenverarbeitung mit manueller Serviceerstellung in sieben Kategorien gegenübergestellt. Die Auswertung der Studie legt die Forschungsfrage nahe, ob das Nutzerverhalten im Kontext Smart Living nicht auch mit einem
dezentralen Lösungsansatz, und somit unabhängig von großen Unternehmen, analysiert werden kann. Hierfür wird im zweiten Teil des Papers die Anwendbarkeit von Process-Mining im Bereich Smart Living untersucht und prototypisch getestet.
Y1  - 2019
SN  - 978-3-944330-62-4
SP  - 216
EP  - 226
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - JOUR
A1  - Bhattarai, Aroj
A1  - Staat, Manfred
T1  - A computational study of organ relocation after laparoscopic pectopexy to repair posthysterectomy vaginal vault prolapse
JF  - Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization
Y1  - 2019
U6  - http://dx.doi.org/10.1080/21681163.2019.1670095
SN  - 2168-1171
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Bleilevens, Christian
A1  - Hill, Aileen
A1  - Grzanna, Tim
A1  - Fechter, Tamara
A1  - Bohnen, Melanie
A1  - Weber, Hans-Joachim
A1  - Beckers, Christian
A1  - Borosch, Sebastian
A1  - Zayat, Rashad
A1  - Benstoem, Carin
A1  - Rossaint, Rolf
A1  - Goetzenich, Andreas
T1  - In vitro head-to-head comparison of anticoagulation properties of two heparin brands in a human blood miniature mock loop
JF  - Interactive cardiovascular and thoracic surgery
Y1  - 2019
U6  - http://dx.doi.org/10.1093/icvts/ivy206
SN  - 1569-9285
VL  - 28
IS  - 1
SP  - 120
EP  - 127
ER  - 
TY  - GEN
A1  - Blottner, Dieter
A1  - Hastermann, Maria
A1  - Muckelt, Paul
A1  - Albracht, Kirsten
A1  - Schoenrock, Britt
A1  - Salanova, Michele
A1  - Warner, Martin
A1  - Gunga, Hans-Christian
A1  - Stokes, Maria
T1  - MYOTONES - Inflight muscle health status monitoring during long-duration space missions onboard the International Space Station: a single case study
T2  - IAC Papers Archive
N2  - The MYOTONES experiment is the first to monitor changes in the basic biomechanical properties (tone, elasticity and stiffness) of the resting human myofascial system due to microgravity with a oninvasive, portable device on board the ISS. The MyotonPRO device applies several brief mechanical stimuli to the surface of the skin, and the natural oscillation signals of the tissue beneath are detected and computed by the MyotonPRO. Thus, an objective, quick and easy determination of the state of the underlying tissue is possible.
Two preflight, four inflight and four post flight measurements were performed on a male astronaut using the same 10 measurement points (MP) for each session. MPs were located on the plantar fascia, Achilles tendon, M. soleus, M. gastrocnemius, M. multifidus, M. splenius capitis, M. deltoideus anterior, M. rectus femoris, infrapatellar tendon, M. tibialis anterior. Subcutaneous tissues thickness above the MPs was measured using ultrasound imaging. Magnetic resonance images (MRI) of lower limb muscles and functional tests were also performed pre- and postflight. 
Our first measurements on board the ISS confirmed increased tone and stiffness of the lumbar multifidus muscle, an important trunk stabilizer, dysfunction of which is known to be associated with back pain. Furthermore, reduced tone and stiffness of Achilles tendon and plantar fascia were observed inflight vs. preflight, confirming previous findings from terrestrial analog studies and parabolic 
flights. Unexpectedly, the deltoid showed negative inflight changes in tone and stiffness, and increased elasticity, suggesting a potential risk of muscle atrophy in longer spaceflight that should be addressed by adequate inflight countermeasure protocols. Most values from limb and back MPS showed deflected patterns (in either directions) from inflight shortly after the re-entry phase on the landing day and one week later. Most parameter values then normalized to baseline after 3 weeks likely due to 1G re-adaptation and possible outcome of the reconditioning protocol. No major changes in subcutaneous tissues thickness above the MPs were found inflight vs preflight, suggesting no bias (i.e., fluid shift, extreme tissue thickening or loss). Pre- and postflight MRI and functional tests showed negligible changes in calf muscle size, power and force, which is likely due to training effects from current inflight exercise protocols.
The MYOTONES experiment is currently ongoing to collect data from further crew members. The potential impact of this research is to better understand the effects of microgravity and countermeasures over the time course of an ISS mission cycle. This will enable exercise countermeasures to be tailored
Y1  - 2019
SN  - 00741795
N1  - International Astronautical Congress: space: the power of the past, the promise of the future - Washington DC, USA/Vereinigte Staaten von Amerika
Dauer: 21.10.2019 → 25.10.2019
PB  - Pergamon
CY  - Oxford
ER  - 
TY  - CHAP
A1  - Blum, Yannik
A1  - Albanna, Walid
A1  - Benninghaus, Anne
A1  - Kotliar, Konstantin
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Vasomotion in retinal vessels of patients presenting post hemorrhagic hydrocephalus following subarachnoid hemorrhage
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - Clearance of blood components and fluid drainage play a crucial role in subarachnoid hemorrhage (SAH) and post hemorrhagic hydrocephalus (PHH). With the involvement of interstitial fluid (ISF) and cerebrospinal fluid (CSF), two pathways for the clearance of fluid and solutes in the brain are proposed. Starting at the level of capillaries, flow of ISF follows along the basement membranes in the walls of cerebral arteries out of the parenchyma to drain into the lymphatics and CSF [1]–[3]. Conversely, it is shown that CSF enters the parenchyma between glial and pial basement membranes of penetrating arteries [4]–[6]. Nevertheless, the involved structures and the contribution of either flow pathway to fluid balance between the subarachnoid space and interstitial space remains controversial. Low frequency oscillations in vascular tone are referred to as vasomotion and corresponding vasomotion waves are modeled as the driving force for flow of ISF out of the parenchyma [7]. Retinal vessel analysis (RVA) allows non-invasive measurement of retinal vessel vasomotion with respect to diameter changes [8]. Thus, the aim of the study is to investigate vasomotion in RVA signals of SAH and PHH patients.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - http://dx.doi.org/10.17185/duepublico/48750
SP  - 38
EP  - 39
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Bosse, Elke
A1  - Barnat, Miriam
T1  - Kombination qualitativer und quantitativer Methoden zur Untersuchung der Studieneinstiegsphase
T2  - Hochschulbildungsforschung : Theoretische, methodologische und methodische Denkanstöße für die Hochschuldidaktik
N2  - Mit Hilfe der Kombination von qualitativen und quantitativen Verfahren zielen Mixed-Methods Ansätze darauf ab, einen vertieften Einblick in komplexe Gegenstände zu gewinnen. In der Hochschulbildungsforschung finden sie zunehmend Anklang, da sie besonders geeignet erscheinen, das vielschichtige Wirkungsgefüge zu erfassen, das das Lehren und Lernen an Hochschulen auszeichnet. Der Beitrag geht den Potenzialen von Mixed-Methods Ansätzen am Beispiel einer Studie zur Studieneingangsphase nach, die den Wirkungszusammenhang zwischen der Nutzung von Angeboten für den Studieneinstieg und der Entwicklung von Studierfähigkeit untersucht. Der Beitrag veranschaulicht die Integration von Methoden und Ergebnissen, um Chancen und Grenzen von Mixed-Methods Studien für die Hochschulbildungsforschung zu diskutieren.
KW  - Mixed-Methods
KW  - Wirkungsforschung
KW  - Hochschule
KW  - Studieneingangsphase
KW  - Studierfähigkeit
Y1  - 2019
SN  - 978-3-658-20309-2
U6  - http://dx.doi.org/10.1007/978-3-658-20309-2_10
SP  - 169
EP  - 184
PB  - Springer VS
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Bosse, Elke
A1  - Barnat, Miriam
ED  - Jenert, Tobias
ED  - Reinmann, Gabi
ED  - Schmohl, Tobias
T1  - Kombination quantitativer und qualitativer  Methoden zur Untersuchung der Studieneingangsphase
T2  - Hochschulbildungsforschung. Theoretische, methodologische und methodische Denkanstöße für die Hochschuldidaktik
Y1  - 2019
SN  - 978-3-658-20308-5
SP  - 169
EP  - 184
PB  - Springer VS
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Sube, Maike
A1  - Schneider, Maike
A1  - Jungemann, Christoph
T1  - Introducing a Cross-University Bachelor’s Programme with Orientation Semester - Enabling a Permeable Academic Education System
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - http://dx.doi.org/10.1109/REM.2019.8744132
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Braun, Sebastian
A1  - Cheng, Chi-Tsun
A1  - Lai, Chow Yin
A1  - Wollert, Jörg
T1  - Microservice Architecture for Automation - Realization by the example of a model-factory’s manufacturing execution system
T2  - Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019
Y1  - 2019
SP  - 33
EP  - 37
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Analysis of volumetric solar radiation absorbers made of wire meshes
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117521
SN  - 0094243X
VL  - 2126
SP  - 030009-1
EP  - 030009-6
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Pilas, Johanna
A1  - Guthmann, Eric
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Towards light-addressable flow control: responsive hydrogels with incorporated graphene oxide as laser-driven actuator structures within microfluidic channels
JF  - Sensor and Actuators B: Chemical
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.snb.2019.02.086
SN  - 0925-4005
VL  - 288
SP  - 579
EP  - 585
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Brockmann, Carsten
A1  - Sultanow, Eldar
A1  - Czarnecki, Christian
ED  - Draude, Claude
ED  - Lange, Martin
ED  - Sick, Bernhard
T1  - Is enterprise architecture still relevant in the digital age?
T2  - GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beiträge
KW  - Preface
KW  - Enterprise Architecture
KW  - Digital Age
Y1  - 2019
SN  - 9783885796893
U6  - http://dx.doi.org/10.18420/inf2019_ws01
SN  - 1617-5468
N1  - 50 Jahre Gesellschaft für Informatik – Informatik für Gesellschaft. 16. September, Kassel
SP  - 21
EP  - 21
PB  - Köllen
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Jessing, Max P.
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Surface regeneration and reusability of label-free DNA biosensors based on weak polyelectrolyte-modified capacitive field-effect structures
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bios.2018.11.019
SN  - 0956-5663
VL  - 126
SP  - 510
EP  - 517
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - BOOK
A1  - Bröder, Alois
A1  - Bauschke, Stefan M.
T1  - Strom-Messwandler: Informationen für Anwender
Y1  - 2019
SN  - 978-3-8440-6233-5
N1  - gedruckt in der Bereichsbibliothek Jülich unter der Signatur 61 XXA 10
PB  - Shaker
CY  - Düren
ER  - 
TY  - BOOK
A1  - Buchholtz, Nils
A1  - Barnat, Miriam
A1  - Bosse, Elke
A1  - Heemsoth, Tim
A1  - Vorhölter, Katrin
A1  - Wibowo, Jonas
T1  - Praxistransfer in der tertiären Bildungsforschung: Modelle, Gelingensbedingungen und Nachhaltigkeit
Y1  - 2019
SN  - 978-3-943423-72-3
PB  - Hamburg University Press
CY  - Hamburg
ER  - 
TY  - JOUR
A1  - Bucur, Alexandru
A1  - Lazarescu, Lucian
A1  - Pop, Grigore Marian
A1  - Achimas, Gheorghe
A1  - Gebhardt, Andreas
T1  - Tribological performance of biodegradable lubricants under different surface roughness of tools
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 1
SP  - 172
EP  - 178
ER  - 
TY  - BOOK
A1  - Budelmann, Harald
A1  - Butenweg, Christoph
ED  - Gunkler, Erhard
T1  - Mauerwerksbau: Bemessung und Konstruktion : Baustoffe, Bemessung und Ausführung, Brandschutz und Erdbeben, Nachhaltigkeit, Bewertung und Revitalisierung
Y1  - 2019
SN  - 978-3-8462-0371-2
N1  - gedruckt in der Bereichsbibliothek Bayernallee vorhanden
PB  - Bundesanzeiger Verlag
CY  - Köln
ET  - 2. überarbeitete und aktualisierte Auflage
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Oertel, Mario
T1  - Wave breaking over a submerged horizontal plate: Optical Flow, LES and RANS
T2  - E-proceedings of the 38th IAHR World Congress  September 1-6, 2019, Panama City, Panama
Y1  - 2019
U6  - http://dx.doi.org/10.3850/38WC092019-0509
SP  - 3690
EP  - 3698
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Holtschoppen, Britta
T1  - Seismic design of structures and components in industrial units
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - Industrial units consist of the primary load-carrying structure and various process engineering components, the latter being by far the most important in financial terms. In addition, supply structures such as free-standing tanks and silos are usually required for each plant to ensure the supply of material and product storage. Thus, for the earthquake-proof design of industrial plants, design and construction rules are required for the primary structures, the secondary structures and the supply structures. Within the framework of these rules, possible interactions of primary and secondary structures must also be taken into account. Importance factors are used in seismic design in order to take into account the usually higher risk potential of an industrial unit compared to conventional building structures. Industrial facilities must be able to withstand seismic actions because of possibly wide-ranging damage consequences in addition to losses due to production standstill and the destruction of valuable equipment. The chapter presents an integrated concept for the seismic design of industrial units based on current seismic standards and the latest research results. Special attention is devoted to the seismic design of steel thin-walled silos and tank structures.
KW  - Industrial units
KW  - Seismic design
KW  - Tanks
KW  - Silos
KW  - Components
Y1  - 2019
SN  - 978-3-662-57550-5
U6  - http://dx.doi.org/10.1007/978-3-662-57550-5_5
SP  - 359
EP  - 481
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
A1  - Salatic, Ratko
T1  - Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading
JF  - Bulletin of Earthquake Engineering
Y1  - 2019
U6  - http://dx.doi.org/10.1007/s10518-019-00602-7
SN  - 1573-1456
VL  - 17
SP  - 3397
EP  - 3422
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Campen, R.
A1  - Kowalski, Julia
A1  - Lyons, W.B.
A1  - Tulaczyk, S.
A1  - Dachwald, Bernd
A1  - Pettit, E.
A1  - Welch, K. A.
A1  - Mikucki, J.A.
T1  - Microbial diversity of an Antarctic subglacial community and high‐resolution replicate sampling inform hydrological connectivity in a polar desert
JF  - Environmental Microbiology
Y1  - 2019
U6  - http://dx.doi.org/10.1111/1462-2920.14607
SN  - 1462-2920
IS  - accepted article
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Capri, Miriam
A1  - Morsiani, Cristina
A1  - Santoro, Aurelia
A1  - Moriggi, Manuela
A1  - Conte, Maria
A1  - Martucci, Morena
A1  - Bellavista, Elena
A1  - Fabbri, Cristina
A1  - Giampieri, Enrico
A1  - Albracht, Kirsten
A1  - Flück, Martin
A1  - Ruoss, Severin
A1  - Brocca, Lorenza
A1  - Canepari, Monica
A1  - Longa, Emanuela
A1  - Giulio, Irene Di
A1  - Bottinelli, Roberto
A1  - Cerretelli, Paolo
A1  - Salvioli, Stefano
A1  - Gelfi, Cecilia
A1  - Franceschi, Claudio
A1  - Narici, Marco
A1  - Rittweger, Jörn
T1  - Recovery from 6-month spaceflight at the International Space Station: muscle-related stress into a proinflammatory setting
JF  - The FASEB journal : official publication of the Federation of American Societies for Experimental Biology
Y1  - 2019
U6  - http://dx.doi.org/10.1096/fj.201801625R
VL  - 33
IS  - 4
SP  - 5168
EP  - 5180
ER  - 
TY  - CHAP
A1  - Chavez Bermudez, Victor Francisco
A1  - Wollert, Jörg
T1  - Gateway for Automation Controllers and Cloud based Voice Recognition Services
T2  - KommA, 10. Jahreskolloquium Kommunikation in der Automation
Y1  - 2019
SN  - 978-3-944722-85-6
SP  - 1
EP  - 8
PB  - Institut für Automation und Kommunikation
CY  - Magdeburg
ER  - 
TY  - JOUR
A1  - Claer, Mario
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - Calibration of a Rotating or Revolving Platform with a LiDAR Sensor
JF  - Applied Sciences
Y1  - 2019
U6  - http://dx.doi.org/10.3390/app9112238
SN  - 2076-3417
VL  - Volume 9
IS  - issue 11, 2238
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Cordes, Sven
A1  - Gligorevic, Snjezana
A1  - Blicharski, Peter
T1  - Analysis of sine precision influence on DOA estimation using the MUSIC algorithm
T2  - 2019 20th International Radar Symposium (IRS)
Y1  - 2019
SN  - 978-3-7369-9860-5
U6  - http://dx.doi.org/10.23919/IRS.2019.8768162
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Cornelis, Peter
A1  - Givanoudi, Stella
A1  - Yongabi, Derick
A1  - Iken, Heiko
A1  - Duwé, Sam
A1  - Deschaume, Olivier
A1  - Robbens, Johan
A1  - Dedecker, Peter
A1  - Bartic, Carmen
A1  - Wübbenhorst, Michael
A1  - Schöning, Michael Josef
A1  - Heyndrickx, Marc
A1  - Wagner, Patrick
T1  - Sensitive and specific detection of E. coli using biomimetic receptors in combination with a modified heat-transfer method
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bios.2019.04.026
SN  - 0956-5663
VL  - 136
SP  - 97
EP  - 105
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Czarnecki, Christian
T1  - Robotergesteuerte Prozessautomatisierung
T2  - Enzyklopädie der Wirtschaftsinformatik
T2  - Robotic Process Automation (RPA)
Y1  - 2019
N1  - Online-Lexikon
SP  - 1
EP  - 3
PB  - Gito
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Czarnecki, Christian
A1  - Bensberg, Frank
T1  - Telekommunikationsunternehmen, Anwendungssysteme für
T2  - Enzyklopädie der Wirtschaftsinformatik
Y1  - 2019
N1  - Online-Lexikon
SP  - 1
EP  - 3
PB  - Gito
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Czarnecki, Christian
A1  - Bensberg, Frank
T1  - Enhanced Telecom Operations Map (eTOM)
T2  - Enzyklopädie der Wirtschaftsinformatik
Y1  - 2019
N1  - Online-Lexikon
SP  - 1
EP  - 4
PB  - Gito
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Czarnecki, Christian
A1  - Bensberg, Frank
A1  - Auth, Gunnar
T1  - Die Rolle von Softwarerobotern für die zukünftige Arbeitswelt
JF  - HMD Praxis der Wirtschaftsinformatik
N2  - Im Rahmen der Digitalisierung ist die zunehmende Automatisierung von bisher manuellen Prozessschritten ein Aspekt, der massive Auswirkungen auf die zukünftige Arbeitswelt haben wird. In diesem Kontext werden an den Einsatz von Softwarerobotern zur Prozessautomatisierung hohe Erwartungen geknüpft. Bei den Implementierungsansätzen wird die Diskussion aktuell insbesondere durch Robotic Process Automation (RPA) und Chatbots geprägt. Beide Ansätze verfolgen das gemeinsame Ziel einer 1:1-Automatisierung von menschlichen Handlungen und dadurch ein direktes Ersetzen von Mitarbeitern durch Maschinen. Bei RPA werden Prozesse durch Softwareroboter erlernt und automatisiert ausgeführt. Dabei emulieren RPA-Roboter die Eingaben auf der bestehenden Präsentationsschicht, so dass keine Änderungen an vorhandenen Anwendungssystemen notwendig sind. Am Markt werden bereits unterschiedliche RPA-Lösungen als Softwareprodukte angeboten. Durch Chatbots werden Ein- und Ausgaben von Anwendungssystemen über natürliche Sprache realisiert. Dadurch ist die Automatisierung von unternehmensexterner Kommunikation (z. B. mit Kunden) aber auch von unternehmensinternen Assistenztätigkeiten möglich. Der Beitrag diskutiert die Auswirkungen von Softwarerobotern auf die Arbeitswelt anhand von Anwendungsbeispielen und erläutert die unternehmensindividuelle Entscheidung über den Einsatz von Softwarerobotern anhand von Effektivitäts- und Effizienzzielen.
KW  - Robotic Process Automation
KW  - Chatbots
KW  - Prozessautomatisierung
KW  - Arbeit 4.0
KW  - Digitalisierung
Y1  - 2019
U6  - http://dx.doi.org/10.1365/s40702-019-00548-z
SN  - 2198-2775
VL  - 56
IS  - 4
SP  - 795
EP  - 808
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
T1  - Global optimization of continuous-thrust trajectories using evolutionary neurocontrol
T2  - Modeling and Optimization in Space Engineering
N2  - Searching optimal continuous-thrust trajectories is usually a difficult and time-consuming task. The solution quality of traditional optimal-control methods depends strongly on an adequate initial guess because the solution is typically close to the initial guess, which may be far from the (unknown) global optimum. Evolutionary neurocontrol attacks continuous-thrust optimization problems from the perspective of artificial intelligence and machine learning, combining artificial neural networks and evolutionary algorithms. This chapter describes the method and shows some example results for single- and multi-phase continuous-thrust trajectory optimization problems to assess its performance. Evolutionary neurocontrol can explore the trajectory search space more exhaustively than a human expert can do with traditional optimal-control methods. Especially for difficult problems, it usually finds solutions that are closer to the global optimum. Another fundamental advantage is that continuous-thrust trajectories can be optimized without an initial guess and without expert supervision.
Y1  - 2019
SN  - 978-3-030-10501-3
SN  - 978-3-030-10500-6
U6  - http://dx.doi.org/10.1007/978-3-030-10501-3_2
N1  - Springer Optimization and Its Applications, vol 144
gedruckt unter der Signatur 21 ZSS 46 in der Bereichsbibliothek Eupener Str. vorhanden
SP  - 33
EP  - 57
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Dantism, Shahriar
A1  - Röhlen, Desiree
A1  - Selmer, Thorsten
A1  - Wagner, Torsten
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Quantitative differential monitoring of the metabolic activity of Corynebacterium glutamicum cultures utilizing a light-addressable potentiometric sensor system
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bios.2019.111332
VL  - 139
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Dantism, Shahriar
A1  - Röhlen, Desiree
A1  - Wagner, Torsten
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - A LAPS-based differential sensor for parallelized metabolism monitoring of various bacteria
JF  - Sensors
N2  - Monitoring the cellular metabolism of bacteria in (bio)fermentation processes is crucial to control and steer them, and to prevent undesired disturbances linked to metabolically inactive microorganisms. In this context, cell-based biosensors can play an important role to improve the quality and increase the yield of such processes. This work describes the simultaneous analysis of the metabolic behavior of three different types of bacteria by means of a differential light-addressable potentiometric sensor (LAPS) set-up. The study includes Lactobacillus brevis, Corynebacterium glutamicum, and Escherichia coli, which are often applied in fermentation processes in bioreactors. Differential measurements were carried out to compensate undesirable influences such as sensor signal drift, and pH value variation during the measurements. Furthermore, calibration curves of the cellular metabolism were established as a function of the glucose concentration or cell number variation with all three model microorganisms. In this context, simultaneous (bio)sensing with the multi-organism LAPS-based set-up can open new possibilities for a cost-effective, rapid detection of the extracellular acidification of bacteria on a single sensor chip. It can be applied to evaluate the metabolic response of bacteria populations in a (bio)fermentation process, for instance, in the biogas fermentation process.
Y1  - 2019
U6  - http://dx.doi.org/10.3390/s19214692
SN  - 1424-8220
VL  - 19
IS  - 21
PB  - MDPI
CY  - Basel
ER  - 
TY  - PAT
A1  - Dauer, David-Raphael
A1  - Hojdis, Nils
A1  - Müller, Norbert
A1  - Recker, Carla
A1  - Schax, Fabian
A1  - Schöffel, Julia
A1  - Tarantola, Gesa
A1  - Weber, Christine
T1  - Schwefelvernetzbare Kautschukmischung, Vulkanisat der Kautschukmischung und Fahrzeugreifen
N2  - Die Erfindung betrifft eine schwefelvernetzbare Kautschukmischung, deren Vulkanisat und einen Fahrzeugreifen. Die schwefelvernetzbare Kautschukmischung enthält wenigstens die folgenden Bestandteile: - wenigstens einen Dienkautschuk; und - 10 bis 300 phr wenigstens einer Kieselsäure; und - 1 bis 30 phf wenigstens eines Silans A mit der allgemeinen Summenformel A-I) A-I)(R1)oSi-R2-(S-R3)q-S-X; und - 0,5 bis 30 phf wenigstens eines Silans B mit der allgemeinen Summenformel B-I) B-I) (R1)oSi-R2-(S-R3)u-S-R2-Si(R1)o wobei q =1, 2 oder 3 ist; und u = 1, 2 oder 3 ist; und X ein Wasserstoffatom oder eine –C(=O)-R8 Gruppe ist wobei R8 ausgewählt ist aus Wasserstoff, C1-C20 Alkylgruppen, vorzugsweise C1-C17, C6-C20- Arylgruppen, vorzugsweise Phenyl, C2-C20-Alkenylgruppen und C7-C20-Aralkylgruppen.
Y1  - 2019
N1  - Patent WO2019105614A1 06.06.2019
auch veröffentlicht unter 
CN111386199A; DE102017221232A1; 
 TW201925306A
ER  - 
TY  - PAT
A1  - Dauer, David-Raphael
A1  - Hojdis, Nils
A1  - Müller, Norbert
A1  - Recker, Carla
A1  - Schax, Fabian
A1  - Schöffel, Julia
A1  - Tarantola, Gesa
A1  - Weber, Christine
T1  - Schwefelvernetzbare Kautschukmischung, Vulkanisat der Kautschukmischung und Fahrzeugreifen
N2  - Die Erfindung betrifft eine schwefelvernetzbare Kautschukmischung, deren Vulkanisat und einen Fahrzeugreifen.Die schwefelvernetzbare Kautschukmischung enthält wenigstens die folgenden Bestandteile:- wenigstens einen Dienkautschuk; und- 10 bis 300 phr wenigstens einer Kieselsäure ; und- 1 bis 30 phf wenigstens eines Silans A mit der allgemeinen Summenformel A-I)und- 0,5 bis 30 phf wenigstens eines Silans B mit der allgemeinen Summenformel B-I)wobei u gleich 0, 1, 2 oder 3 und v gleich 0 oder 1 ist.
Y1  - 2019
N1  - Patent DE102017221236A1 29.05.2019
auch veröffentlicht unter CN111405987A; TW201925305A; WO2019105615A1
ER  - 
TY  - JOUR
A1  - Delaittre, Guillaume
T1  - Telechelic Poly(2-Oxazoline)s
JF  - European Polymer Journal
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.eurpolymj.2019.109281
SN  - 0014-3057
IS  - In Press, Journal Pre-proof, 109281
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Donner, Ralf
A1  - Rabel, Matthias
A1  - Scholl, Ingrid
A1  - Ferrein, Alexander
A1  - Donner, Marc
A1  - Geier, Andreas
A1  - John, André
A1  - Köhler, Christian
A1  - Varga, Sebastian
T1  - Die Extraktion bergbaulich relevanter Merkmale aus 3D-Punktwolken eines untertagetauglichen mobilen Multisensorsystems
T2  - Tagungsband Geomonitoring
Y1  - 2019
U6  - http://dx.doi.org/10.15488/4515
SP  - 91
EP  - 110
ER  - 
TY  - JOUR
A1  - Dotzauer, Martin
A1  - Pfeiffer, Diana
A1  - Lauer, Markus
A1  - Pohl, Marcel
A1  - Mauky, Eric
A1  - Bär, Katharina
A1  - Sonnleitner, Matthias
A1  - Zörner, Wilfried
A1  - Hudde, Jessica
A1  - Schwarz, Björn
A1  - Faßauer, Burkhardt
A1  - Dahmen, Markus
A1  - Rieke, Christian
A1  - Herbert, Johannes
A1  - Thrän, Daniela
T1  - How to measure flexibility – Performance indicators for demand driven power generation from biogas plants
JF  - Renewable Energy
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.renene.2018.10.021
SN  - 0960-1481
SP  - 135
EP  - 146
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - BOOK
A1  - Drumm, Christian
A1  - Knigge, Marlene
A1  - Scheuermann, Bernd
A1  - Weidner, Stefan
T1  - Einstieg in SAP ERP: Geschäftsprozesse, Komponenten, Zusammenhänge : erklärt am Beispielunternehmen Global Bike
Y1  - 2019
SN  - 978-3-8362-6298-9
SN  - 978-3-8362-8206-2 E-ISBN
N1  - auch als E-Book verfügbar
PB  - Rheinwerk Publishing
CY  - Bonn
ET  - 1. Auflage
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
T1  - Big Data Research - How to Structure the Changes of the Past Decade?
T2  - The Art of Structuring
N2  - In the past decade, many IS researchers focused on researching the phenomenon of Big Data. At the same time, the relevance of data protection gets more attention than ever before. In particular, since the enactment of the European General Data Protection Regulation in May 2018 Information Systems research should provide answers for protecting personal data. The article at hand presents a structuring framework for Big Data research outcome and the consideration of data protection. IS Researchers might use the framework in order to structure Big Data literature and to identify research gaps that should be addressed in the future.
Y1  - 2019
SN  - 978-3-030-06234-7
U6  - http://dx.doi.org/10.1007/978-3-030-06234-7_26
SP  - 271
EP  - 281
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
T1  - Understanding the acceptance of smart home-based insurances
T2  - Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm & Uppsala, Sweden, June 8-14, 2019
Y1  - 2019
SN  - 978-1-7336325-0-8
SP  - 1
EP  - 15
ER  - 
TY  - CHAP
A1  - Eichler, Fabian
A1  - Skupin, Marco
A1  - Thurn, Laura
A1  - Kasch, Susanne
A1  - Schmidt, Thomas
T1  - Operating limits for beam melting of glass materials
T2  - Modern Technologies in Manufacturing (MTeM 2019)
N2  - Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901004
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01004
ER  - 
TY  - JOUR
A1  - Engel, Mareike
A1  - Bayer, Hendrik
A1  - Holtmann, Dirk
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Flavin secretion of Clostridium acetobutylicum in a bioelectrochemical system - Is an iron limitation involved?
JF  - Bioelectrochemistry
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bioelechem.2019.05.014
SN  - 1567-5394
IS  - In Press, Accepted Manuscript
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Engel, Mareike
A1  - Gemünde, Andre
A1  - Holtmann, Dirk
A1  - Müller-Renno, Christine
A1  - Ziegler, Christiane
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Clostridium acetobutylicum’s connecting world: cell appendage formation in bioelectrochemical systems
JF  - ChemElectroChem
Y1  - 2019
U6  - http://dx.doi.org/10.1002/celc.201901656
SN  - 2196-0216
IS  - Accepted Article
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - THES
A1  - Engelmann, Ulrich M.
T1  - Assessing magnetic fluid hyperthermia : magnetic relaxation simulation, modeling of nanoparticle uptake inside pancreatic tumor cells and in vitro efficacy
Y1  - 2019
SN  - 978-3-945954-58-4
N1  - Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2019
PB  - Infinite Science Publishing
CY  - Lübeck
ER  - 
TY  - GEN
A1  - Engelmann, Ulrich M.
T1  - Gesprächsführungskompetenzen für Naturwissenschaftler und Ingenieure. Maßnahmen zur Förderung und curricularen Verankerung von Gesprächsführungskompetenzen an Fachhochschulen
T1  - Conversational Skills for Scientists and Engineers. - Measures for the Development and Curricular Promotion of Conversational Competences at German Universities of Applied Science
Y1  - 2019
U6  - http://dx.doi.org/10.13140/RG.2.2.34026.98248
PB  - Deutsche Gesellschaft für Sprechwissenschaft und Sprecherziehung (DGSS e.V.)
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Seifert, Julian
A1  - Mues, Benedikt
A1  - Roitsch, Stefan
A1  - Ménager, Christine
A1  - Schmidt, Annette M.
A1  - Slabu, Ioana
T1  - Heating efficiency of magnetic nanoparticles decreases with gradual immobilization in hydrogels
JF  - Journal of Magnetism and Magnetic Materials
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.jmmm.2018.09.113
SN  - 0304-8853
VL  - 471
IS  - 1
SP  - 486
EP  - 494
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Shasha, Carolyn
A1  - Teeman, Eric
A1  - Slabu, Iona
A1  - Krishnan, Kannan M.
T1  - Predicting size-dependent heating efficiency of magnetic nanoparticles from experiment and stochastic Néel-Brown Langevin simulation
JF  - Journal of Magnetism and Magnetic Materials
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.jmmm.2018.09.041
SN  - 0304-8853
VL  - 471
IS  - 1
SP  - 450
EP  - 456
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Badri, Sriram
A1  - Wenning, Marius
A1  - Kallweit, Stephan
T1  - Implementation of an Autonomous Tool Trolley in a Production Line
T2  - Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980
Y1  - 2019
SN  - 978-3-030-19648-6
U6  - http://dx.doi.org/10.1007/978-3-030-19648-6_14
SP  - 117
EP  - 125
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Ermolaev, AP
A1  - Erichev, VP
A1  - Antonov, AA
A1  - Grigoryan, GL
A1  - Kotliar, Konstantin
A1  - Levitsky, YV
A1  - Hderi, K
A1  - Mazurova, YV
T1  - Assessing retinal photosensitivity in patients with central vision impairment using a portable perimeter (a preliminary report)
JF  - Vestnik oftalmologii
Y1  - 2019
U6  - http://dx.doi.org/10.17116/oftalma201913503146
N1  - Abstract in Englisch
VL  - 135
IS  - 3
SP  - 46
EP  - 54
ER  - 
TY  - CHAP
A1  - Ernhardt, Selina
A1  - Drumm, Christian
A1  - van Gog, Tamara
A1  - Brand-Gruwel, Saskia
A1  - Jarodzka, Halszka
T1  - Through the eyes of a programmer : a research project on how to foster programming education with eye-tracking technology
T2  - Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule für Angewandte Wissenschaften Aachen
Y1  - 2019
SN  - 978-3-944330-62-4
SP  - 42
EP  - 47
PB  - Mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Eschler, Eric
A1  - Wozniak, Felix
A1  - Richter, Christoph
A1  - Drechsler, Klaus
T1  - Materialanalyse an lokal verstärkten Triaxialgeflechten
T2  - Leichtbau in Forschung und industrieller Anwendung von der Nano- bis zur Makroebene, LLC, Landshuter Leichtbau-Colloquium, 9
Y1  - 2019
SN  - 978-3-9818439-2-7
SP  - 120
EP  - 131
PB  - Leichtbau Cluster
CY  - Landshut
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Bharatheesha, Mukunda
A1  - Schiffer, Stefan
A1  - Corbato, Carlos Hernandez
T1  - TRROS 2018 :  Teaching Robotics with ROS Workshop at ERF 2018;  Proceedings of the Workshop on Teaching Robotics with ROS (held at ERF 2018), co-located with European Robotics Forum 2018 (ERF 2018), Tampere, Finland, March 15th, 2018
T2  - CEUR Workshop Proceedings
Y1  - 2019
SN  - 1613-0073
IS  - Vol-2329
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
A1  - Neumann, Tobias
A1  - Krückel, Kai
A1  - Schiffer, Stefan
T1  - A system for continuous underground site mapping and exploration
Y1  - 2019
U6  - http://dx.doi.org/10.5772/intechopen.85859
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Bil, Cees
A1  - Braun, Carsten
T1  - Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft
JF  - Journal of Aircraft
Y1  - 2019
U6  - http://dx.doi.org/10.2514/1.C035428
SN  - 1533-3868
VL  - 57
IS  - 2
SP  - 245
EP  - 255
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Engine Failure Constraints on the Initial Sizing of Hybrid-Electric GA Aircraft
T2  - AIAA Scitech 2019 Forum
Y1  - 2019
U6  - http://dx.doi.org/10.2514/6.2019-1812
N1  - AIAA Scitech Forum, 2019; San Diego; United States; 7 January 2019 through 11 January 2019
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Götten, Falk
T1  - Neue Ansätze für die Entwicklung von unbemannten Fluggeräten
JF  - Ingenieurspiegel
N2  - Wie sieht das unbemannte Flugzeug von Übermorgen aus? Dieser Frage stellen sich Forscher an der Fachhochschule Aachen. Die weltweit rasant fortschreitende Entwicklung des Marktes für unbemannte Fluggeräte (UAVs - „Unmanned Aerial Vehicles“) bietet großes Potenzial für Wachstum und Wertschöpfung. Unbemannte fliegende Systeme können – für bestimmte Anwendungsgebiete – wesentlich günstiger, kleiner und effizienter ausgelegt werden als bemannte Lösungen. Dabei sind sich viele Unternehmen über das mögliche Potential dieser Technologie noch gar nicht bewusst.
Y1  - 2019
SN  - 1868-5919
N1  - Project: UAV Design
VL  - 2019
IS  - 1
SP  - 67
EP  - 68
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, C.
T1  - On Aircraft Design Under the Consideration of Hybrid-Electric Propulsion Systems
T2  - APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)
N2  - A hybrid-electric propulsion system combines the advantages of fuel-based systems and battery powered systems and offers new design freedom. To take full advantage of this technology, aircraft designers must be aware of its key differences, compared to conventional, carbon-fuel based, propulsion systems. This paper gives an overview of the challenges and potential benefits associated with the design of aircraft that use hybrid-electric propulsion systems. It offers an introduction of the most popular hybrid-electric propulsion architectures and critically assess them against the conventional and fully electric propulsion configurations. The effects on operational aspects and design aspects are covered. Special consideration is given to the application of hybrid-electric propulsion technology to both unmanned and vertical take-off and landing aircraft. The authors conclude that electric propulsion technology has the potential to revolutionize aircraft design. However, new and innovative methods must be researched, to realize the full benefit of the technology.
KW  - Hybrid-electric aircraft
KW  - Aircraft design
KW  - Design rules
KW  - Green aircraft
Y1  - 2019
SN  - 978-981-13-3305-7
U6  - http://dx.doi.org/10.1007/978-981-13-3305-7_99
N1  - APISAT 2018 - Asia-Pacific International Symposium on Aerospace Technology. 16-18 October 2018. Chengdu, China.

Lecture Notes in Electrical Engineering (LNEE, volume 459)
SP  - 1261
EP  - 1272
PB  - Springer
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Mass, Primary Energy, and Cost - The Impact of Optimization Objectives on the Initial Sizing of Hybrid-Electric General Aviation Aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany
Y1  - 2019
U6  - http://dx.doi.org/10.25967/490012
SP  - 1
EP  - 17
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Cost Estimation Methods for Hybrid-Electric General Aviation Aircraft
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Khalsa, R.
A1  - Kreyer, Jörg
A1  - Mayntz, Joscha
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Esch, Thomas
A1  - Kemper, Hans
A1  - Schmitz, O.
A1  - Bragard, Michael
T1  - An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt
N2  - In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.
Y1  - 2019
ER  - 
TY  - JOUR
A1  - Finkenberger, Isabel Maria
T1  - Bodenpolitik als Instrument strategischer Transformation
JF  - UrbanLab-Magazin : Fachzeitschrift für Stadt- und Quartierplanung
Y1  - 2019
VL  - 2019
IS  - 05
SP  - 18
EP  - 25
ER  - 
TY  - CHAP
A1  - Finkenberger, Isabel Maria
A1  - Baumeister, Eva-Maria
A1  - Koch, Christian
T1  - Komplement und Verstärker : Wandel durch neue Allianzen
T1  - Amplifier and complement : creating change through new alliances
T2  - Komplement und Verstärker : zum Verhältnis von Stadtplanung, künstlerischen Praktiken und Kulturinstitutionen
Y1  - 2019
SN  - 978-3-86859-578-9
SP  - 10
EP  - 39
PB  - JOVIS Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Finkenberger, Isabel Maria
A1  - Baumeister, Eva-Maria
A1  - Koch, Christian
T1  - Komplement und Verstärker : der Diskurs geht weiter
T1  - Amplifier and complement : the discourse continues
T2  - Komplement und Verstärker : zum Verhältnis von Stadtplanung, künstlerischen Praktiken und Kulturinstitutionen
Y1  - 2019
SN  - 978-3-86859-578-9
SP  - 40
EP  - 49
PB  - JOVIS Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Finkenberger, Isabel Maria
A1  - Baumeister, Eva-Maria
A1  - Koch, Christian
T1  - Themen
T1  - Topics
T2  - Komplement und Verstärker: zum Verhältnis von Stadtplanung, künstlerischen Praktiken und Kulturinstitutionen
Y1  - 2019
SN  - 978-3-86859-578-9
SP  - 50
EP  - 57
PB  - JOVIS Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Finkenberger, Isabel Maria
A1  - Herbert, Saskia
A1  - Malorny, Thomas
A1  - Koch, Christian
T1  - Perforierte Wirklichkeit und mögliche Zukünfte : ein Gespräch
T1  - Perforated reality and possible futures : a conversation
T2  - Komplement und Verstärker : zum Verhältnis von Stadtplanung, künstlerischen Praktiken und Kulturinstitutionen
Y1  - 2019
SN  - 978-3-86859-578-9
SP  - 108
EP  - 129
PB  - JOVIS Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Franzen, Julian
A1  - Stecken, Jannis
A1  - Pfaff, Raphael
A1  - Kuhlenkötter, Bernd
T1  - Using the Digital Shadow for a Prescriptive Optimization of Maintenance and Operation : The Locomotive in the Context of the Cyber-Physical System
T2  - Advances in Production, Logistics and Traffic
N2  - In competition with other modes of transport, rail freight transport is looking for solutions to become more attractive. Short-term success can be achieved through the data-driven optimization of operations and maintenance as well as the application of novel strategies such as prescriptive maintenance. After introducing the concept of prescriptive maintenance, this paper aims to prove that vehicle-focused applications of this approach indeed have the potential to increase attractiveness. However, even greater advantages can be activated if data from the horizontal network of the vehicle is available. Drawing on the state of the art in research and technology in the field of cyber-physical systems (CPS) as well as digital twins and shadows, our work serves to design a system of systems for the horizontal interconnection of a rail vehicle and to conceptualize a draft for a digital twin of a locomotive.
Y1  - 2019
SN  - 978-3-030-13535-5
U6  - http://dx.doi.org/10.1007/978-3-030-13535-5_19
SP  - 265
EP  - 276
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
T1  - Flexible Fuel Operation of a Dry-Low-Nox Micromix Combustor with Variable Hydrogen Methane Mixtures
T2  - Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan
Y1  - 2019
SN  - 978-4-89111-010-9
N1  - IGTC-2019-013
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - An overview on dry low NOx micromix combustor development for hydrogen-rich gas turbine applications
JF  - International Journal of Hydrogen Energy
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.ijhydene.2019.01.161
SN  - 0360-3199
VL  - 44
IS  - 13
SP  - 6978
EP  - 6990
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - Development and Testing of a FuelFlex Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications With Variable Hydrogen Methane Mixtures
T2  - ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition.  June 17–21, 2019 Phoenix, Arizona, USA. Volume 4A: Combustion, Fuels, and Emissions
Y1  - 2019
SN  - 978-0-7918-5861-5
U6  - http://dx.doi.org/10.1115/GT2019-90095
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Abanteriba, Sylvester
T1  - Numerical and Experimental Evaluation of a Dual-Fuel Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications
JF  - Journal of Thermal Science and Engineering Applications
Y1  - 2019
U6  - http://dx.doi.org/10.1115/1.4041495
SN  - 19485085
N1  - Paper No: GT2017-64795
VL  - 11
IS  - 1
SP  - 011015
PB  - ASME
CY  - New York
ER  - 
TY  - JOUR
A1  - Gaigall, Daniel
T1  - On a new approach to the multi-sample goodness-of-fit problem
JF  - Communications in Statistics - Simulation and Computation
N2  - Suppose we have k samples X₁,₁,…,X₁,ₙ₁,…,Xₖ,₁,…,Xₖ,ₙₖ with different sample sizes ₙ₁,…,ₙₖ and unknown underlying distribution functions F₁,…,Fₖ as observations plus k families of distribution functions {G₁(⋅,ϑ);ϑ∈Θ},…,{Gₖ(⋅,ϑ);ϑ∈Θ}, each indexed by elements ϑ from the same parameter set Θ, we consider the new goodness-of-fit problem whether or not (F₁,…,Fₖ) belongs to the parametric family {(G₁(⋅,ϑ),…,Gₖ(⋅,ϑ));ϑ∈Θ}. New test statistics are presented and a parametric bootstrap procedure for the approximation of the unknown null distributions is discussed. Under regularity assumptions, it is proved that the approximation works asymptotically, and the limiting distributions of the test statistics in the null hypothesis case are determined. Simulation studies investigate the quality of the new approach for small and moderate sample sizes. Applications to real-data sets illustrate how the idea can be used for verifying model assumptions.
KW  - Goodness-of-fit test
KW  - Multi-sample problem
KW  - Parametric bootstrap
Y1  - 2019
U6  - http://dx.doi.org/10.1080/03610918.2019.1618472
SN  - 1532-4141
VL  - 53
IS  - 10
SP  - 2971
EP  - 2989
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Galdi, Chiara
A1  - Hartung, Frank
A1  - Dugelay, Jean-Luc
T1  - Socrates: A database of realistic data for source camera recognition on smartphones
T2  - Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM
Y1  - 2019
SN  - 978-989-758-351-3
U6  - http://dx.doi.org/10.5220/0007403706480655
SP  - 648
EP  - 655
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
A1  - Hoetter, Jan-Steffen
T1  - Rapid Tooling
T2  - CIRP Encyclopedia of Production Engineering
Y1  - 2019
SN  - 978-3-662-53120-4
U6  - http://dx.doi.org/10.1007/978-3-662-53120-4
SP  - 39
EP  - 52
PB  - Springer
CY  - Berlin, Heidelberg
ER  -