TY  - JOUR
A1  - Iken, Heiko
A1  - Ahlborn, K.
A1  - Gerlach, F.
A1  - Vonau, W.
A1  - Zander, W.
A1  - Schubert, J.
A1  - Schöning, Michael Josef
T1  - Development of redox glasses and subsequent processing by means of pulsed laser deposition for realizing silicon-based thin-film sensors
JF  - Electrochimica acta
Y1  - 2013
SN  - 1873-3859 (E-Journal); 0013-4686 (Print)
SP  - Available online 30.8.2013
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Meyer-Stork, L. Sebastian
A1  - Höcker, Hartwig
A1  - Berndt, Heinz
T1  - Syntheses and reactions of urethanes of cellobiose and cellulose-containing uretdione groups
JF  - Journal of applied polymer science
Y1  - 1992
SN  - 1097-4628
VL  - 44
IS  - 6
SP  - 1043
EP  - 1049
ER  - 
TY  - JOUR
A1  - Kaltschmitt, Martin
A1  - Thrän, Daniela
A1  - Fredebeul-Krein, Markus
A1  - Vogel, Erika
A1  - Kalitzky, Thomas
A1  - Ehrhart, Karl Martin
A1  - Hoppe, Christian
A1  - Seifert, Stefan
A1  - Sijm, Jos
A1  - Böhringer, Christoph
A1  - Hoffmann, Tim
A1  - Moslener, Ulf
A1  - Sturm, Bodo
A1  - Diekmann, Jochen
A1  - Schleich, Joachim
T1  - CO2-Emissionshandel
JF  - Zeitschrift für Energiewirtschaft
Y1  - 2006
SN  - 0343-5377 (Print) 1866-2765 (Online)
VL  - Vol. 30
IS  - Iss. 4
SP  - 271
EP  - 314
ER  - 
TY  - JOUR
A1  - Merschenz-Quack, Angelika
T1  - Betriebsanweisungen beim Umgang mit Gefahrstoffen
JF  - Elektro-Praktiker : Fachzeitschrift für Handwerk und Industrie
Y1  - 1991
SN  - 0013-5569
VL  - Bd. 45
IS  - H. 10
SP  - 644
EP  - 649
ER  - 
TY  - JOUR
A1  - Mootz, D.
A1  - Merschenz-Quack, Angelika
T1  - Zur Kenntnis der höchsten Hydrate der Schwefelsäure: Bildung und Struktur von H2SO4·6,5 H2O und H2SO4·8H2O
JF  - Zeitschrift für Naturforschung B: Journal of chemical sciences
Y1  - 1987
SN  - 1865-7117 (E-Journal); 0932-0776 (Print)
VL  - 42
IS  - H. 10
SP  - 1231
EP  - 1236
ER  - 
TY  - JOUR
A1  - Hemmerling, H.-J.
A1  - Merschenz-Quack, Angelika
A1  - Wunderlich, H.
T1  - Crystal structures of indeno[1,2-d]imidazoles. XIth European Crystallographic Meeting, Vienna 1988
JF  - Zeitschrift für Kristallographie - Crystalline Materials
Y1  - 1988
SN  - 2196-7105 (E-Books); 2194-4946 (Print)
VL  - 185
IS  - H. 1-4
SP  - 256
ER  - 
TY  - JOUR
A1  - Ramazani, Ali
A1  - Li, Yang
A1  - Mukherjee, Krishnendu
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Abdurakhmanov, Aydemir
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding
JF  - Computational materials science
Y1  - 2013
SN  - 1879-0801 (E-Book); 0927-0256 (Print)
VL  - Vol. 68
SP  - 107
EP  - 116
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schiebahn, Alexander
T1  - Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2013
SN  - 0036-7184
VL  - Bd. 65
IS  - H. 6
SP  - 309
EP  - 313
PB  - DVS Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
A1  - Füssel, Uwe
A1  - Schnick, Michael
A1  - Hertel, Martin
A1  - Jaeckel, Sebastian
T1  - Modelling and visualisation of the GMA process
JF  - Welding and Cutting
Y1  - 2012
SN  - 1612-3433
VL  - 11
IS  - 4
SP  - 242
EP  - 249
PB  - DVS Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Thermisches Direktfügen von Metall und Kusntstoff: eine Alternative zur Klebtechnik
JF  - Adhäsion : Kleben & Dichten
N2  - Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik für Hochlohnländer“ der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktfügen, das eine stoffschlüssige Verbindung zwischen Kunststoff und Metall ermöglicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.
Y1  - 2012
U6  - https://doi.org/10.1007/s35145-012-0005-x
SN  - 0001-8198 (E-Journal); 0001-8198 (Print)
N1  - Printausg. in der Bibliothek der FH Aachen vorhanden: 63 Z 807-2012
VL  - 56
IS  - 11
SP  - 36
EP  - 40
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
A1  - Füssel, Uwe
A1  - Schnick, Michael
A1  - Hertel, Martin
A1  - Jaeckel, Sebastian
T1  - Modellierung und Visualisierung der MSG-Lichtbogenprozesse
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2012
SN  - 0036-7184
VL  - 64
IS  - 4
SP  - 166
EP  - 174
PB  - DVS Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Andrey
T1  - Measuring of plasma properties induced by non-vacuum electron beam welding
JF  - Physics of plasma
N2  - Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel’s method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.
Y1  - 2012
U6  - https://doi.org/10.1063/1.3675874
SN  - 1089-7674 (E-Journal); 1070-664X (Print)
VL  - 19
IS  - 1
SP  - 1
EP  - 7
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Turichin, Gleb
A1  - Valdaitseva, Elena
A1  - Bach, Friedrich-Wilhelm
A1  - Hassel, Thomas
A1  - Beniyashi, Alexander
T1  - Investigation of factors influencing the formation of weld defects in non-vacuum electron beam welding
JF  - The Paton welding journal
N2  - The influence of welding condition parameters and properties of material on formation of defects, such as humping and undercuts, in non-vacuum electron beam welding was investigated. The influence of separate welding parameters on the quality of welds was determined.
Y1  - 2012
SN  - 0957-798X
VL  - 2012
IS  - 2
SP  - 11
EP  - 18
PB  - Paton Publishing House
CY  - Kiev
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Olschok, Simon
A1  - Jakobs, Stefan
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Rossiter, Eduardo
T1  - Laser beam submerged arc hybrid welding
JF  - Physics procedia
N2  - The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.
Y1  - 2012
U6  - https://doi.org/10.1016/j.phpro.2012.10.016
SN  - 1875-3892
N1  - Part of special issue "Laser assisted net shape engineering 7 (LANE 2012)"
VL  - 39
SP  - 75
EP  - 83
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Optimization of laser welding of DP/TRIP steel sheets using statistical approach
JF  - Optics and laser technology
N2  - Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box–Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.
Y1  - 2012
U6  - https://doi.org/10.1016/j.optlastec.2011.06.028
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 255
EP  - 262
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - https://doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
T1  - Virtual welding equipment for simulation of GMAW processes with integration of power source regulation
JF  - Frontiers of materials science
Y1  - 2011
SN  - 2095-0268 (E-Journal); 2095-025X (Print)
VL  - Vol. 5
IS  - Iss. 2
SP  - 79
EP  - 89
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Reisgen, Uwe
A1  - Schleser, Markus
T1  - Laser assisted joining of plastic metal hybrids
JF  - Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)
Y1  - 2011
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
SP  - 370
EP  - 377
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Propawe, Reinhart
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative approach of joining hybrid components
JF  - Journal of laser applications
Y1  - 2011
SN  - 1042-346X
VL  - Vol. 23
IS  - Iss. 3
SP  - 32007
PB  - Laser Institute of America
CY  - Orlando, Fla.
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Harms, Alexander
A1  - Schiebahn, Alexander
A1  - Thiele, Regina
ED  - Kampker, Achim
T1  - Elektromobilität - Herausforderungen an die Fügetechnik
JF  - mobilität morgen - Magazin zu Mobilität und Elektromobilität
Y1  - 2011
VL  - Jg. 1
IS  - Nr. 2
SP  - 16
EP  - 17
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Harms, Alexander
A1  - Schiebahn, Alexander
A1  - Naumov, Andreas
T1  - Erweiterung des Parameterfelds zum Rührreibschweißen mittels konduktiver Unterstützung
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2011
SN  - 0036-7184
VL  - Bd. 63
IS  - H. 12
SP  - 710
EP  - 714
PB  - DVS-Media GmbH
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel
JF  - ISIJ international
Y1  - 2011
SN  - 1347-5460 (E-Journal); 0915-1559 (Print)
VL  - Vol. 51
IS  - No. 3
SP  - 429
EP  - 434
PB  - ISIJ
CY  - Tōkyō
ER  - 
TY  - JOUR
A1  - Glowania, Michael
A1  - Gries, Thomas
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative coating technology for textile reinforcements of concrete applications
JF  - 13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)
Y1  - 2011
SN  - 978-3-03785-008-4
SN  - 1013-9826 (E-Journal) ; 0252-1059 (Print)
SP  - 167
EP  - 173
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - JOUR
A1  - Mukherjee, Krishnendu
A1  - Ramazani, Ali
A1  - Yang, Li
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
T1  - Characterization of gas metal arc welded hot rolled DP600 steel
JF  - Steel research international
Y1  - 2011
SN  - 1869-344X (E-Book); 1611-3683 (Print)
VL  - Vol. 82
IS  - Iss. 12
SP  - 1408
EP  - 1416
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Mukherjee, Krishnendu
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
T1  - Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels
JF  - Materialwissenschaft und Werkstofftechnik
N2  - The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.
Y1  - 2010
U6  - https://doi.org/10.1002/mawe.201000692
SN  - 1521-4052
VL  - 41
IS  - 11
SP  - 972
EP  - 983
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets
JF  - Journal of materials processing technology
N2  - Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking–Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.
Y1  - 2010
U6  - https://doi.org/http10.1016/j.jmatprotec.2010.08.003
SN  - 0924-0136
VL  - 210
IS  - 15
SP  - 2188
EP  - 2196
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels
JF  - Applied surface science
N2  - The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.
Y1  - 2010
U6  - https://doi.org/10.1016/j.apsusc.2010.08.042
SN  - 0169-4332 (E-Journal); 0169-4332 (Print)
VL  - 257
IS  - 5
SP  - 1401
EP  - 1406
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Ahmed, Essam
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
T1  - On formability of tailor laser welded blanks of DP/TRIP steel sheets
JF  - Science and technology of welding and joining
N2  - This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.
Y1  - 2010
U6  - https://doi.org/10.1179/136217110X12731414739754
SN  - 1743-2936
VL  - 15
IS  - 5
SP  - 337
EP  - 342
PB  - Maney
CY  - Leeds
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
T1  - Messung der Strahlqualität einer Elektronenstrahlanlage in Umgebungsatmosphäre
JF  - Materialwissenschaft und Werkstofftechnik
N2  - In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im größeren Maßstab verwendet wird, seine Fähigkeit als qualitatives Werkzeug für die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosphärendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualität, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngrößen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage über die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngrößen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosphärischen Bedingungen beschrieben. Es wird zudem die Abhängigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt.
Y1  - 2010
SN  - 1521-4052
VL  - 41
IS  - 1
SP  - 45
EP  - 52
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Kleben dünnwandiger Bauteile aus textilbewehrtem Beton
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2008
SN  - 0036-7184
VL  - Bd. 60
IS  - H. 7/8
SP  - 408
EP  - 412
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts
JF  - Cement and concrete composites
Y1  - 2008
SN  - 0958-9465
VL  - Vol. 30
IS  - iss. 2
SP  - 82
EP  - 87
ER  - 
TY  - JOUR
A1  - Feldmann, Markus
A1  - Pak, Daniel
A1  - Geßler, Achim
A1  - Schleser, Markus
T1  - Entwicklung eines Bemessungsmodells für punktförmige Verbindungen textibewehrter Betonbauteile
JF  - Bautechnik : Zeitschrift für den gesamten Ingenieurbau
Y1  - 2008
SN  - 0005-6820, 0341-1052, 0932-6359, 0932-8351, 0932-8351
N1  - Printausg. in der Bibliothek der FH Aachen vorhanden: 13 Z 177
VL  - Bd. 85
IS  - 2
SP  - 143
EP  - 147
ER  - 
TY  - JOUR
A1  - Feldmann, Markus
A1  - Pak, Daniel
A1  - Geßler, Achim
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - Bonded connections for textile reinforced concrete structures
JF  - Cailiao-gongcheng = Journal of materials engineering
Y1  - 2006
SN  - 1001-4381
IS  - Special iss.
SP  - 123
EP  - 127
ER  - 
TY  - JOUR
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilthey, Ulrich
T1  - Application of polymers for textile-reinforced concrete
JF  - Journal of materials in civil engineering : properties, applications, durability
Y1  - 2006
SN  - 0899-1561
VL  - 18
IS  - 5
SP  - 670
EP  - 676
ER  - 
TY  - JOUR
A1  - Agrafiotis, Christos C.
A1  - Mavroidis, Ilias
A1  - Konstandopoulos, Athansios G.
A1  - Hoffschmidt, Bernhard
A1  - Stobbe, Per
A1  - Romero, Manuel
A1  - Fernandez-Quero, Valerio
T1  - Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation
JF  - Solar energy materials and solar cells
Y1  - 2007
SN  - 1879-3398 (E-Journal); 0927-0248 (Print)
VL  - Vol. 91
IS  - Iss. 6
SP  - 474
EP  - 488
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Hanisch, Vera
A1  - Gries, Thomas
T1  - Garnzugprüfung polymergetränkter Textilien für die Bewehrung von Beton
JF  - Technische Textilien
Y1  - 2006
SN  - 0323-3243
VL  - 49
IS  - 1
SP  - 48
EP  - 50
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Geßler, Achim
A1  - Rettweiler, Timo
A1  - Völling, Boris
T1  - Kleben textilbewehrter Betonbauteile
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8
Y1  - 2005
SN  - 0036-7184
SP  - 373
EP  - 377
ER  - 
TY  - JOUR
A1  - Sedlacek, G.
A1  - Schätzke, C.
A1  - Geßler, M.
A1  - Schleser, Markus
T1  - Fügen von Bauteilen aus textilbewehrtem Beton
JF  - Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik.  Bd. 79 (2004), H. 12
Y1  - 2004
SN  - 0005-6650
N1  - Printausg. in der Bibliothek der FH Aachen vorhanden: 13 Z 049-2004
SP  - 569
EP  - 575
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Brandenburg, Annette
A1  - Schleser, Markus
T1  - Dispensing and application of unfilled adhesives in the micro range
JF  - Welding and cutting. 3 (2004), H. 4
Y1  - 2004
SN  - 1612-3433
SP  - 250
EP  - 254
ER  - 
TY  - JOUR
A1  - Meliß, Michael
A1  - Windheim, R.
T1  - Energiequelle für morgen :  Möglichkeiten und Grenzen der Windenergienutzung - ein Statusbericht
JF  - VDI-Nachrichten. Bd. 31 (1977), H. 22
Y1  - 1977
SN  - 0042-1758
SP  - 37
EP  - 38
ER  - 
TY  - JOUR
A1  - Meliß, Michael
A1  - Bünde, R.
T1  - Unkonventionelle Energiequellen - Entwicklungsstudien (4)
JF  - Brennstoff, Wärme, Kraft : BWK
Y1  - 1978
SN  - 0006-9612 (Print) ; 1436-4883 (E-Journal)
VL  - 30
IS  - 3
SP  - 120
EP  - 126
PB  - Springer-VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiequellen
JF  - Brennstoff, Wärme, Kraft : BWK
Y1  - 1978
SN  - 0006-9612 (Print) ; 1436-4883 (E-Journal)
VL  - 30
IS  - 4
SP  - 151
EP  - 156
PB  - Springer-VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiequellen
JF  - Brennstoff, Wärme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 31 (1979), H. 4
Y1  - 1979
SN  - 0006-9612 (Print) ; 1436-4883 (E-Journal)
SP  - 147
EP  - 154
ER  - 
TY  - JOUR
A1  - Stein, H.
A1  - Meliß, Michael
T1  - Die Bedeutung der Sonnenenergie für die zukünftige Energieversorgung der Bundesrepublik Deutschland
JF  - Din-Mitteilungen + Elektronorm. Bd. 59 (1980), H. 8
Y1  - 1980
SN  - 0722-2912
SP  - 434
EP  - 440
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiequellen
JF  - Brennstoff, Wärme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 33 (1981), H. 4
Y1  - 1981
SN  - 0006-9612 (Print) ; 1436-4883 (E-Journal)
SP  - 138
EP  - 145
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiequellen
JF  - Brennstoff, Wärme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 34 (1982), H. 4
Y1  - 1982
SN  - 0006-9612 (Print) ; 1436-4883 (E-Journal)
SP  - 182
EP  - 189
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiequellen
JF  - Brennstoff, Wärme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 35 (1983), H. 4
Y1  - 1983
SN  - 0006-9612 (Print) ; 1436-4883 (E-Journal)
SP  - 150
EP  - 155
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiequellen
JF  - Brennstoff, Wärme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 36 (1984), H. 4
Y1  - 1984
SN  - 0006-9612 (Print) ; 1436-4883 (E-Journal)
SP  - 134
EP  - 139
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiequellen
JF  - Brennstoff, Wärme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 37 (1985), H. 4
Y1  - 1985
SN  - 0006-9612 (Print) ; 1436-4883 (E-Journal)
SP  - 145
EP  - 150
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiesysteme (Teil 2)
JF  - Neue Deliwa-Zeitschrift. Bd. 37 (1986) Heft 1
Y1  - 1986
SN  - 0369-383x
SP  - 14
EP  - 19
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiesysteme. Teil 1
JF  - Neue Deliwa-Zeitschrift. Bd. 36 (1985) Heft 12
Y1  - 1985
SN  - 0369-383x
SP  - 568
EP  - 572
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Photovoltaik bietet größtes Potential. NRW-Forschungs- und Entwicklungsarbeiten bereits heute anerkennenswert
JF  - Energie : das Magazin für Wirtschaft, Forschung, Technik, Umwelt. Bd. 41 (1989), H. 12
Y1  - 1989
SN  - 0013-7359
SP  - 32
EP  - 41
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiequellen. Technischer Stand und Wirtschaftlichkeit
JF  - Energiewirtschaftliche Tagesfragen. Jg. 39 (1989), H. 1/2
Y1  - 1989
SN  - 0013-743X ; 0720-6240
SP  - 18
EP  - 25
ER  - 
TY  - JOUR
A1  - Velraj, R.
A1  - Seeniraj, R. V.
A1  - Hafner, B.
A1  - Faber, Christian
A1  - Schwarzer, Klemens
T1  - Heat transfer enhancement in a latent heat storage system
JF  - Solar energy. Vol. 65, iss. 3
Y1  - 1999
SN  - 0038-092X
SP  - 171
EP  - 180
ER  - 
TY  - JOUR
A1  - Schwarzer, Klemens
A1  - Vieira da Silva, Maria Eugenia
A1  - Schwarzer, Tarik
T1  - Field results in Namibia and Brazil of the new solar desalination system for decentralised drinking water production
JF  - Desalination and water treatment. Vol. 31 (2011), iss. 1-3: selected papers presented at EuroMed 2010 — Desalination for Clean Water and Energy: Cooperation among Mediterranean Countries of Europe and MENA Region, 3–7 October 2010, Tel Aviv, Israel
Y1  - 2011
SP  - 379
EP  - 386
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Menzel, S.
A1  - Bäcker, Matthias
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Degradation of thin poly(lactic acid) films: characterization by capacitance-voltage, atomic force microscopy, scanning electron microscopy and contact-angle measurements
JF  - Electrochimica Acta
Y1  - 2013
SN  - 1873-3859 (E-Journal); 0013-4686 (Print)
VL  - Vol. 113
SP  - 779
EP  - 784
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Koll, G.
A1  - Schwarzbözl, P.
A1  - Hennecke, K.
A1  - Hoffschmidt, Bernhard
A1  - Hartz, T.
T1  - Gebündelte Kraft: das solarthermische Versuchskraftwerk Jülich
JF  - BWK : das Energie-Fachmagazin / Hrsg.: Verein Deutscher Ingenieure. Jg. 61 (2009), Nr. 9
Y1  - 2009
SN  - 0006-9612
N1  - Printausg. in der Bibliothek vorhanden: 23 Z 261-2009
SP  - 60
EP  - 62
PB  - Springer-VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Kroker, J.
A1  - Faber, Christian
A1  - Trinkl, C.
A1  - Zörner, W.
T1  - Der Garten bleibt - solares Heizen mit Wärmepumpe und Latentwärmespeicher verzichtet auf großflächige Erdwärmetauscher
JF  - Erneuerbare Energien : das Magazin. 18 (2008), H. 8
Y1  - 2008
SN  - 1436-8773
SP  - 46
EP  - 49
ER  - 
TY  - JOUR
A1  - Timme, Michael
T1  - Begrenzung von Mietbürgschaften gem. § 551 Abs. 4 BGB?
JF  - Der Miet-Rechts-Berater : MietRB
Y1  - 2013
SN  - 1612-040X
IS  - 8
SP  - 248
EP  - 249
PB  - Verlag Dr. Otto Schmidt
CY  - Köln
ER  - 
TY  - JOUR
A1  - Timme, Michael
T1  - Begrenzung von Mietbürgschaften gem. § 551 Abs. 4 BGB?
JF  - Monatsschrift für deutsches Recht : MdR
Y1  - 2013
SN  - 0340-1812 (Print) ; 2194-4202 (E-Journal)
VL  - 16
SP  - 948
EP  - 949
PB  - Verlag Dr. Otto Schmidt
CY  - Köln
ER  - 
TY  - JOUR
A1  - Dietzel, F.
A1  - Weber, Hans-Joachim
A1  - Porschen, W.
A1  - Feinendegen, L. E.
T1  - Zur Wärmeempfindlichkeit von oxischen und hypoxischen Zellen in einem Tumor
JF  - Naturwissenschaften
Y1  - 1976
U6  - https://doi.org/10.1007/BF00622808
SN  - 0028-1042
VL  - 63
IS  - 12
SP  - 585
EP  - 586
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Porschen, W.
A1  - Gartzen, J.
A1  - Gewehr, K.
A1  - Mühlensiepen, H.
A1  - Weber, Hans-Joachim
A1  - Feinedegen, L E.
T1  - In vivo assay of the radiation sensitivity of hypoxic tumour cells : influence of γ-rays, cyclotron neutrons, misonidazole, hyperthermia and mixed modalities
JF  - The British journal of cancer / Supplement
N2  - Tumour cell death can be evaluated in the living mouse by externally measuring the rate of loss of tumour-bound DNA tracer. By sequentially labelling the tumour-bearing animals with ¹²⁵IUdR and ¹³¹IUdR 50 h apart, the average tumour cells at the time of the second injection are labelled by ¹²⁵IUdR and the euoxic tumour cells are specifically labelled with ¹³¹IUdR. Tumour treatment at this stage of labelling permits the observation of the reaction of euoxic cells and average tumour cells and finally yields data on hypoxic cells and thus on the oxygen enhancement ratio. This information adds to results from tumour control and growth delay.

With this technique effects were analysed of 60-Co γ-rays, cyclotron neutrons (E = 6 MeV), misonidazole (500 mg/kg body wt) and hyperthermia (42°C water-bath), or combinations of these.

Misonidazole (15 min before irradiation) altered the oxygen enhancement ratio by a factor of 1·5 for γ-rays and of 1·1 for neutrons; when evaluated from tumour-growth delay and TCD-50 misonidazole gave a dose modifying factor of 1·47 for γ-rays and of 1·2-1·3 for neutrons.

Based on percentage tumour regression 100 days after treatment, the enhancement ratio from hyperthermia (after irradiation) was 2·75 for γ-rays (at 10 Gray) and 2·2 for neutrons (at 3·2 Gray). For neutrons combined with misonidazole and hyperthermia the ratio was 2·4.

These results demonstrate that effects of neutron irradiation may be modified by electron-affinic substances and/or hyperthermia.
Y1  - 1978
SN  - 0306-9443
N1  - Section 6: Sensitization and Hypoxic Cytotoxicity: Effects of Hyperthermia and High Let
IS  - 3
SP  - 194
EP  - 197
PB  - Lewis
CY  - London
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C
JF  - Zeitschrift für Physikalische Chemie
Y1  - 1982
SN  - 0942-9352
VL  - 133
IS  - 2
SP  - 167
EP  - 174
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Dagsoez, A. K.
T1  - Feinbleche schweißen : die Temperaturverteilung in dünnen Stahlblechplatten beim Lichtbogenschweißen
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1971
SN  - 0040-148X
VL  - 63
IS  - 9
SP  - 57
EP  - 59
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Tuelbentci, K.
T1  - Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 3
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1974
SN  - 0040-148X
VL  - 66
IS  - 2
SP  - 43
EP  - 47
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Tuelbentci, K.
T1  - Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 2
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1973
SN  - 0040-148X
VL  - 65
IS  - 52
SP  - 9
EP  - 13
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Tuelbentci, K.
T1  - Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke beim Lichtbogenschweißen ; Teil 1
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1973
SN  - 0040-148X
VL  - 65
IS  - 48
SP  - 13
EP  - 15
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
T1  - Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abhängigkeit von einigen Spritzparametern
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1978
SN  - 0040-148X
VL  - 70
IS  - 39
SP  - 37
EP  - 41
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Anik, Sabri
T1  - Gespritzte Metallbeschichtungen : Eigenschaften lichtbogengespritzter Stahlschichten in Abhängigkeit von einigen Spritzparametern
JF  - Technische Rundschau : TR ; das Schweizer Industrie-Magazin
Y1  - 1978
SN  - 0040-148X
VL  - 70
IS  - 26
SP  - 9
EP  - 13
PB  - Medtrix Group
CY  - Basel
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Experimentelle Ergebnisse zum Lösungsverhalten von Sauerstoff in den Systemen Cu-O-Bi und Cu-O-Pb
JF  - Neue Hütte : metallurgisch-metallkundliche Fachzeitschrift für Forschung und Praxis
Y1  - 1986
SN  - 0028-3207
VL  - 31
IS  - 9
SP  - 344
EP  - 347
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Untersuchungen zum Lösungsverhalten von Sauerstoff in Metallschmelzen
JF  - Neue Hütte : metallurgisch-metallkundliche Fachzeitschrift für Forschung und Praxis
Y1  - 1986
SN  - 0028-3207
VL  - 31
IS  - 7
SP  - 255
EP  - 258
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the lead-antimony system at 1173 K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1987
SN  - 0044-2658
VL  - 40
IS  - 6
SP  - 316
EP  - 319
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the copper-antimony system at 1473K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1988
SN  - 0044-2658
VL  - 41
IS  - 10
SP  - 498
EP  - 501
ER  - 
TY  - JOUR
A1  - Wemhöner, Carsten
A1  - Hafner, Bernd
A1  - Schwarzer, Klemens
T1  - Simulation of solar thermal systems with CARNOT blockset in the environment MATLAB-Simulink
Y1  - 2000
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Die Vorausbestimmung der Stickstofflöslichkeit in binären Eisenschmelzen
JF  - Archiv für das Eisenhüttenwesen : Fachberichte
Y1  - 1984
SN  - 0003-8962
SN  - 1611-3683
VL  - 55
IS  - 8
SP  - 365
EP  - 367
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Über die Voraussetzungen der Wasserstofflöslichkeit in binären Eisenschmelzen
JF  - Archiv für das Eisenhüttenwesen : Fachberichte
Y1  - 1984
SN  - 0003-8962
SN  - 1611-3683
VL  - 55
IS  - 2
SP  - 45
EP  - 48
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C
JF  - Zeitschrift für Metallkunde
Y1  - 1988
SN  - 0044-3093
VL  - 79
IS  - 5
SP  - 336
EP  - 339
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1987
SN  - 0940-483X
SN  - 0005-9021
VL  - 91
IS  - 7
SP  - 790
EP  - 794
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Thermodynamic relations between component activities and gas solubilities in binary metallic systems
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1985
SN  - 0940-483X
SN  - 0005-9021
VL  - 89
IS  - 2
SP  - 130
EP  - 134
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Experiments and theoretical considerations on the solution of oxygen in binary metal alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1983
SN  - 0005-9021
SN  - 0940-483X
VL  - 87
IS  - 12
SP  - 1201
EP  - 1204
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energieträger: Trotz Boom - Natur setzt enge Grenzen
JF  - Energie-Trends. 6 (1994)
Y1  - 1994
SP  - 1
EP  - 3
ER  - 
TY  - JOUR
A1  - Laack, Walter van
A1  - Levers, A.
A1  - Staat, Manfred
T1  - Gonarthrosetherapie auf Kernspinresonanzbasis mit MBST-Vierjahresbeobachtungen
JF  - Orthopädische Nachrichten : Zeitung für Orthopädie und Unfallchirurgie. 2013, H. 7/8
Y1  - 2013
SN  - 1437-2193
SP  - 13
PB  - Biermann
CY  - Köln
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1984
SN  - 0940-483X
SN  - 0005-9021
VL  - 88
IS  - 8
SP  - 707
EP  - 710
ER  - 
TY  - JOUR
A1  - Laack, Walter van
T1  - The genetic code should be seen as a positioning code
JF  - British journal of arts and social sciences. Vol. 14 (2013), No. 1
Y1  - 2013
SN  - 2046-9578
SP  - 93
EP  - 97
ER  - 
TY  - JOUR
A1  - Kramer, Friederike
A1  - Halamkova, Lenka
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
A1  - Halamek, Jan
T1  - Biocatalytic analysis of biomarkers for forensic identification of ethnicity between Caucasian and African American
JF  - The analyst. August 2013
Y1  - 2013
SN  - 1364-5528 (E-Journal); 0003-2654 (Print)
VL  - Vol. 138
SP  - 6251
EP  - 6257
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Meliß, Michael
T1  - Regenerative Energiequellen
JF  - Brennstoff, Wärme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 50 (1998), H. 4
Y1  - 1998
SN  - 0006-9612 (Print) ; 1436-4883 (E-Journal)
N1  - Printausg. in der Bibliothek vorhanden: 63 Z 609-1998
SP  - 74
EP  - 81
ER  - 
TY  - JOUR
A1  - Meliß, Michael
A1  - Neskakis, A.
A1  - Plettner-Marliani, J.
A1  - Lange, C.
A1  - Hövelmann, A.
A1  - Schumacher, J.
T1  - Waste water recycling supplied by renewable energies : basic conditions and possible treatment technologies
JF  - Renewable energy. Vol. 14 (1998), iss. 1-4. 6th Arab International Solar Energy Conference: Bringing Solar Energy into the Daylight, Muscat, Sultanate of Oman, 29.03.-01.04.1998
Y1  - 1998
SN  - 1879-0682 (E-Book); 0960-1481 (Print)
SP  - 325
EP  - 331
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Prediction of thermodynamic properties of oxygen in binary metallic solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 6
SP  - 372
EP  - 375
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Kapoor, Madan Lal
A1  - Frohberg, Martin G.
T1  - Thermodynamic behaviour of oxygen in molten substitutional alloy solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 1
SP  - 53
EP  - 58
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 8
SP  - 530
EP  - 534
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 10
SP  - 665
EP  - 666
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1984
SN  - 0044-3093
VL  - 75
IS  - 8
SP  - 586
EP  - 589
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The calculation of component activities of binary metallic melts from their gas solubilities
JF  - Zeitschrift für Metallkunde
Y1  - 1985
SN  - 0044-3093
VL  - 76
IS  - 2
SP  - 135
EP  - 137
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Topuz, A.
A1  - Tuncel, H. S.
T1  - Einfluß der Parameter beim Diffusionsschweißen der Stähle X 210 Cr 12 und 25 MoCr 4 auf ihre mechanischen Eigenschaften
JF  - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 1991
SN  - 0036-7184
VL  - 43
IS  - 6
SP  - 341
EP  - 344
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Topuz, A.
A1  - Tuncel, H. S.
T1  - Einfluß der Parameter beim Diffusionsschweißen der Stähle X210Cr12 mit 25 CrMo4 auf die Ausbildung der Bindezone
JF  - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 1992
SN  - 0036
VL  - 44
IS  - 2
SP  - 97
EP  - 100
ER  - 
TY  - JOUR
A1  - Bohrn, Ulrich
A1  - Mucha, Andreas
A1  - Werner, Frederik
A1  - Trattner, Barbara
A1  - Bäcker, Matthias
A1  - Krumbe, Christoph
A1  - Schienle, Meinrad
A1  - Stütz, Evamaria
A1  - Schmitt-Landsiedel, Doris
A1  - Fleischer, Maximilian
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - A critical comparison of cell-based sensor systems for the detection of Cr (VI) in aquatic environment
JF  - Sensors and actuators. B: Chemical
Y1  - 2013
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - Vol. 182
SP  - 58
EP  - 65
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Ichimura, Hiroki
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Chemical imaging of the concentration profile of ion diffusion in a microfluidic channel
JF  - Sensors and actuators. B: Chemical
N2  - The chemical imaging sensor is a device to visualize the spatial distribution of chemical species based on the principle of LAPS (light-addressable potentiometric sensor), which is a field-effect chemical sensor based on semiconductor. In this study, the chemical imaging sensor has been applied to investigate the ion profile of laminar flows in a microfluidic channel. The chemical images (pH maps) were collected in a Y-shaped microfluidic channel while injecting HCl and NaCl solutions into two branches. From the chemical images, it was clearly observed that the injected solutions formed laminar flows in the channel. In addition, ion diffusion across the laminar flows was observed, and the diffusion coefficient could be derived by fitting the pH profiles to the Fick's equation.
Y1  - 2013
U6  - https://doi.org/10.1016/j.snb.2013.04.057
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
N1  - Part of special issue "Selected Papers from the 26th European Conference on Solid-State Transducers"
VL  - 189
SP  - 240
EP  - 245
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Jens, Otto
A1  - Kaldenhoff, E.
A1  - Kirschner-Hermanns, R.
A1  - Mühl, Thomas
A1  - Klinge, Uwe
T1  - Elongation of textile pelvic floor implants under load is related to complete loss of effective porosity, thereby favoring incorporation in scar plates
JF  - Journal of biomedical materials research. Part A
N2  - Use of textile structures for reinforcement of pelvic floor structures has to consider mechanical forces to the implant, which are quite different to the tension free conditions of the abdominal wall. Thus, biomechanical analysis of textile devices has to include the impact of strain on stretchability and effective porosity. Prolift® and Prolift + M®, developed for tension free conditions, were tested by measuring stretchability and effective porosity applying mechanical strain. For comparison, we used Dynamesh-PR4®, which was designed for pelvic floor repair to withstand mechanical strain. Prolift® at rest showed moderate porosity with little stretchability but complete loss of effective porosity at strain of 4.9 N/cm. Prolift + M® revealed an increased porosity at rest, but at strain showed high stretchability, with subsequent loss of effective porosity at strain of 2.5 N/cm. Dynamesh PR4® preserved its high porosity even under strain, but as consequence of limited stretchability. Though in tension free conditions Prolift® and Prolift + M® can be considered as large pore class I meshes, application of mechanical strain rapidly lead to collapse of pores. The loss of porosity at mechanical stress can be prevented by constructions with high structural stability. Assessment of porosity under strain was found helpful to define requirements for pelvic floor devices. Clinical studies have to prove whether devices with high porosity as well as high structural stability can improve the patients' outcome.
Y1  - 2014
U6  - https://doi.org/10.1002/jbm.a.34767
SN  - 1552-4965
VL  - 102
IS  - 4
SP  - 1079
EP  - 1084
PB  - Wiley
CY  - New York
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
T1  - From the attempt of certain classical reformulations of quantum mechanics to quasi-probability representations
JF  - Journal of mathematical physics
N2  - The concept of an injective affine embedding of the quantum states into a set of classical states, i.e., into the set of the probability measures on some measurable space, as well as its relation to statistically complete observables is revisited, and its limitation in view of a classical reformulation of the statistical scheme of quantum mechanics is discussed. In particular, on the basis of a theorem concerning a non-denseness property of a set of coexistent effects, it is shown that an injective classical embedding of the quantum states cannot be supplemented by an at least approximate classical description of the quantum mechanical effects. As an alternative approach, the concept of quasi-probability representations of quantum mechanics is considered.
Y1  - 2013
U6  - https://doi.org/10.1063/1.4861939
SN  - 1089-7658 (Online)
SN  - 0022-2488 (Print)
VL  - 55
IS  - 1
PB  - American Institute of Physics
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Anik, Salahaddin
T1  - Stand der Schweißtechnik in der Türkei
JF  - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 1991
SN  - 0036-7184
VL  - 43
IS  - 3
SP  - 142
EP  - 145
ER  -