TY  - JOUR
A1  - Röth, Thilo
A1  - Nowack, N.
A1  - Baumeister, E.
T1  - Numerische Lösungsansätze zur Auslegung von Stahl-Leichtmetall-Hybriden aus Verbundguss für zukünftige Fahrzeugstrukturen / Nowack, N. ; Röth, T. ; Baumeister, E.
JF  - Berechnung und Simulation im Fahrzeugbau. Bd. 1 : Tagung Würzburg, 27. und 28. September 2006 = Numerical analysis and simulation in vehicle engineering / VDI-Gesellschaft Fahrzeug- und Verkehrstechnik
Y1  - 2006
SN  - 3-18-091967-1
N1  - VDI-Berichte ; 1967
SP  - 363
EP  - 368
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Dahmann, Peter
A1  - Hagemeister, Wilhelm
A1  - Nagel, Günther
A1  - Exner, Peter
T1  - Geregelte Innenzahnradpumpe im Mehrquadrantenbetrieb Geschwindigkeits- und Positionsregelung eines hydraulischen Handlinggerätes
JF  - O+P Ölhydraulik und Pneumatik. 24 (2006), H. 1
Y1  - 2006
SN  - 0341-2660
SP  - 24
EP  - 28
ER  - 
TY  - BOOK
A1  - Havermann, Marc
T1  - PIV measurements in shock tunnels : PivNet 2, Final Workshop, Göttingen, 07. - 08.09.2006
Y1  - 2006
N1  - Publication / Institut Franco-Allemand de Recherches de Saint Louis ; 644
PB  - ISL
CY  - Saint-Louis
ER  - 
TY  - BOOK
A1  - Havermann, Marc
T1  - PIV measurements of compressible vortex rings generated by a shock tube : 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, PT, 26-29.06.2006; axe de recherches 2.14 / Haertig, J.; Rey, C.; Havermann, M. Institut Franco-Allemand de Recherches de Saint-Louis
Y1  - 2006
N1  - Publication / Institut Franco-Allemand de Recherches de Saint Louis ; 645
PB  - ISL
CY  - Saint-Louis
ER  - 
TY  - JOUR
A1  - Havermann, Marc
A1  - Seiler, F.
T1  - Boundary Layer Influence on Supersonic Jet/Cross-Flow Interaction in Hypersonic Flow / Havermann, M. ; Seiler, F.
JF  - Notes on Numerical Fluid Mechanics and Multidisciplinary Design. 92 (2006)
Y1  - 2006
SN  - 1612-2909
N1  - New results in numerical and experimental fluid mechanics ; V ;
ISBN 978-3-540-33287-9
SP  - 281
EP  - 288
PB  - -
ER  - 
TY  - BOOK
A1  - Havermann, Marc
A1  - Seiler, F.
A1  - George, A.
A1  - Srulijes, J.
T1  - Progress in doppler picture velocimetry (DPV) technique : 12th International Symposium on Flow Visualization, DLR, Göttingen, September 10 - 14, 2006 / Institut Franco-Allemand de Recherches de Saint-Louis. Seiler, F. ...
Y1  - 2006
N1  - Publication / Institut Franco-Allemand de Recherches de Saint Louis ; 624
PB  - ISL
CY  - Saint-Louis
ER  - 
TY  - JOUR
A1  - Havermann, Marc
T1  - Systematic Shock Tube Experiments on Vortex Ring Generation and Propagation / Havermann, M. ; Kainuma, M. ; Takayama, K.
JF  - Shock waves : proceedings of the 25th International Symposium on Shock Waves-ISSW25, July 17 - 22, 2005, Bangalore, India / ed.: G. Jagadeesh
Y1  - 2006
SN  - 978-81-7371571-6
N1  - International Symposium on Shock Waves ; 25 (Bangalore) : 2005.07.17-22
ISSW ; 25 (Bangalore) : 2005.07.17-22
PB  - Universities Pr.
CY  - Hyderabad
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
T1  - Numerical Debris Flow Simulation
T2  - Schweizer Numerik Kolloquium : Book of Abstracts 12. April 2006
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - McArdell, B. W.
A1  - Bartelt, Perry
T1  - A comparison of two approaches to modeling multiphase gravity currents
T2  - Geophysical Research Abstracts
Y1  - 2006
N1  - A-08738
VL  - 8
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-10.3.3
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Ballmann, Josef
A1  - Dafnis, Athanasios
A1  - Braun, Carsten
A1  - Korsch, Helge
A1  - Reimerdes, Hans-Günther
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - The HIRENASD project: High Reynolds number aerostructural dynamics experiments in the European Transonic Wind Tunnel (ETW)
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-5.11.2
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Korsch, Helge
A1  - Dafnis, Athanasios
A1  - Reimerdes, Hans-Günther
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Dynamic qualification of the HIRENASD elastic wing model
T2  - Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft für Luft- und Raumfahrt. 2006
Y1  - 2006
SP  - 1441
EP  - 1450
PB  - Dt. Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth (DGLR)
CY  - Bonn
ER  - 
TY  - PAT
A1  - Rainer, Nähle
A1  - Röstel, Reinhard
A1  - Wahle, Michael
T1  - Lagerungssystem in einem Raumfahrzeug : Patentschrift
T1  - Storage system for use inside a spacecraft has damping elements consisting of at least one permanent magnet and vortex flow plate : patent of invention
Y1  - 2006
PB  - Deutsches Patent- und Markenamt
CY  - München
ER  - 
TY  - CHAP
A1  - Loeb, Horst W.
A1  - Schartner, Karl-Heinz
A1  - Seboldt, Wolfgang
A1  - Dachwald, Bernd
A1  - Streppel, Joern
A1  - Meusemann, Hans
A1  - Schülke, Peter
T1  - SEP for a lander mission to the jovian moon europa
T2  - 57th International Astronautical Congress
N2  - Under DLR-contract, Giessen University and DLR Cologne are studying solar-electric propulsion missions (SEP) to the outer regions of the solar system. The most challenging reference mission concerns the transport of a 1.35-tons chemical lander spacecraft into an 80-RJ circular orbit around Jupiter, which would enable to place a 375 kg lander with 50 kg of scientific instruments on the surface of the icy moon "Europa". Thorough analyses show that the best solution in terms of SEP launch mass times thrusting time would be a two-stage EP module and a triple-junction solar array with concentrators which would be deployed step by step. Mission performance optimizations suggest to propel the spacecraft in the first EP stage by 6 gridded ion thrusters, running at 4.0 kV of beam voltage, which would save launch mass, and in the second stage by 4 thrusters with 1.25 to 1.5 kV of positive high voltage saving thrusting time. In this way, the launch mass of the spacecraft would be kept within 5.3 tons. Without a launcher's C3 and interplanetary gravity assists, Jupiter might be reached within about 4 yrs. The spiraling-down into the parking orbit would need another 1.8 yrs. This "large mission" can be scaled down to a smaller one, e.g., by halving all masses, the solar array power, and the number of thrusters. Due to their reliability, long lifetime and easy control, RIT-22 engines have been chosen for mission analysis. Based on precise tests, the thruster performance has been modeled.
Y1  - 2006
U6  - http://dx.doi.org/10.2514/6.IAC-06-C4.4.04
N1  - 57th International Astronautical Congress, 02 October 2006 - 06 October 2006, Valencia, Spain.
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Kahle, Ralph
A1  - Wie, Bong
T1  - Solar sail Kinetic Energy Impactor (KEI) mission design tradeoffs for impacting and deflecting asteroid 99942 Apophis
T2  - AIAA/AAS Astrodynamics Specialist Conference and Exhibit
N2  - Near-Earth asteroid 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several so-called gravitational keyholes during its 2029-encounter. Several pre-2029-deflection scenarios to prevent Apophis from doing this have been investigated so far. Because the keyholes are less than 1 km in size, a pre-2029 kinetic impact is clearly the best option because it requires only a small change in Apophis' orbit to nudge it out of a keyhole. A single solar sail Kinetic Energy Impactor (KEI) spacecraft that impacts Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages at about 0.75 AU would be a feasible option to do this. The spacecraft consists of a 160 m x 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. In this paper, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, solar sail Kinetic Energy Impactor (KEI) spacecraft are still a feasible option to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value. In this paper, we elaborate potential pre- and post-2029 KEI impact scenarios for a launch in 2020, and investigate tradeoffs between different mission parameters.
KW  - Solar Sail
KW  - Asteroid Deflection
KW  - Planetary Protection
KW  - Trajectory Optimization
Y1  - 2006
U6  - http://dx.doi.org/10.2514/6.2006-6178
N1  - AIAA/AAS Astrodynamics Specialist Conference and Exhibit, 21 August 2006 - 24 August 2006, Keystone, Colorado(USA).
SP  - 1
EP  - 20
ER  - 
TY  - PAT
A1  - Pischinger, Martin
A1  - Esch, Thomas
A1  - Duesmann, Klaus
T1  - Elektromagnetischer Aktuator mit gelenkig abgestützter Rückstellfeder
N2  - Die Erfindung betrifft einen elektromagnetischen Aktuator zur Betätigung eines Stellgliedes (7) mit wenigstens einem gesteuert bestrombaren Elektromagneten (1, 2) und einem mit dem Stellglied (7) in Wirkverbindung stehenden Anker (5), der bei Bestromung des Elektromagneten (1, 2) gegen die Kraft wenigstens einer an einem Gehäuse (12) abgestützten Rückstellfeder (10) an der Polfläche (3, 4) des Elektromagneten (1, 2) zur Anlage kommt, und daß zumindest der Anker (5) über eine sphärische Gelenkanordnung (11) auf der Rückstellfeder (10) abgestützt ist.
Y1  - 2023
N1  - Patent DE000019822907B4 2006.07.27
ER  - 
TY  - CHAP
A1  - Huth, Thomas
A1  - Elsen, Olaf
A1  - Hartwig, Christoph
A1  - Esch, Thomas
T1  - Innovative modular valve trains for 2015 - logistic benefits by EMVT
T2  - IFAC Proceedings Volumes, Volume 39, Issue 3
N2  - In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary.
Y1  - 2006
U6  - http://dx.doi.org/10.3182/20060517-3-FR-2903.00172
N1  - Part of special issue "12th IFAC Symposium on Information Control Problems in Manufacturing"
SP  - 315
EP  - 320
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Verbrennungstechnik. - 	6. Aufl., [Umdruck]. - (Angewandte Thermodynamik und Verbrennungstechnik)
Y1  - 2007
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Ohndorf, A.
T1  - 1st ACT Global Trajectory Optimisation Competition : Results found at DLR
JF  - Acta Astronautica. 61 (2007), H. 9
Y1  - 2007
SN  - 0094-5765
N1  - Global Trajectory Optimization ;  Results of the First Competition Organised by the Advanced Concept Team (ACT) of the European Space Agency (ESA)
SP  - 742
EP  - 752
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - McDonald, Malcolm
A1  - McInnes, Colin R.
A1  - Mengali, Giovanni
T1  - Impact of Optical Degradation on Solar Sail Mission Performance
JF  - Journal of Spacecraft and Rockets. 44 (2007), H. 4
Y1  - 2007
SN  - 0022-4650
N1  - 2. ISSN: 1533-6794
SP  - 740
EP  - 749
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Wi, Bong
T1  - Solar Sail Kinetic Energy Impactor Trajectory Optimization for an Asteroid-Deflection Mission
JF  - Journal of Spacecraft and Rockets. 44 (2007), H. 4
Y1  - 2007
SN  - 0022-4650
N1  - 2. ISSN: 1533-6794
SP  - 755
EP  - 764
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Mengali, Giovanni
A1  - Quarta, Alessandro A.
A1  - Circi, Christian
T1  - Refined Solar Sail Force Model with Mission Application / Giovanni Mengali ; Alessandro A. Quarta , Christian Circi ;  Bernd Dachwald
JF  - Journal of Guidance, Control, and Dynamics. 30 (2007), H. 2
Y1  - 2007
SN  - 0162-3192
N1  - 2. ISBN: 0731-5090
SP  - 512
EP  - 520
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - MacDonald, Malcolm
A1  - McInnes, Colin R.
T1  - Heliocentric Solar Sail Orbit Transfers with Locally Optimal Control Laws / Malcolm Macdonald ; Colin McInnes ; Bernd Dachwald
JF  - Journal of Spacecraft and Rockets. 44 (2007), H. 1
Y1  - 2007
SN  - 0022-4650
SP  - 273
EP  - 276
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Carnelli, I.
A1  - Vasile, M.
T1  - Optimizing low-thrust gravity assist interplanetary trajectories using evolutionary neurocontrollers / I. Carnelli ; B. Dachwald ; M. Vasile
JF  - IEEE Congress on Evolutionary Computation, 2007 : CEC 2007 ; 25 - 28 September 2007, Singapore
Y1  - 2007
SN  - 978-1-424-41339-3
N1  - ISBN 10: 1-424-41339-7 ; IEEE Congress on Evolutionary Computation <2007, Singapore> ; 	Institute of Electrical and Electronics Engineers ; Nebent: CEC 2007 ; Parallel als Online-Ausg. erschienen
SP  - 965
EP  - 972
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - BOOK
A1  - Blome, Hans-Joachim
A1  - Zaun, Harald
T1  - Der Urknall : Anfang und Zukunft des Universums 2., aktualisierte Aufl.
Y1  - 2007
SN  - 3-406-50837-5
PB  - Beck
CY  - München
ER  - 
TY  - JOUR
A1  - Gerhardt, Hans Joachim
A1  - Schönwald, J.
A1  - Konrath, B.
T1  - Verwendung von Leichtgas bei Brandsimulationen - unzulässig oder sinnvoll?
JF  - VFDB-Zeitschrift : Forschung, Technik und Management im Brandschutz. 56 (2007), H. 1
Y1  - 2007
SN  - 0042-1804
SP  - 29
EP  - 31
ER  - 
TY  - JOUR
A1  - Ley, Wilfried
A1  - Plescher, Engelbert
A1  - Scholz, Artur
A1  - Piepenbrock, Johannes
T1  - COMPASS-1 picosatellite project / Ley, Wilfried ; Plescher, Engelbert ; Scholz, Artur ; Piepenbrock, Johannes
JF  - Small satellites for earth observation : digest of the 6th International symposium of the International Academy of Astronautics, Berlin, April 23 - 26, 2007 / ed. by Rainer Sandau; Hans-Peter Röser; Arnoldo Valenzuela
Y1  - 2007
SN  - 9783896855718
N1  - Symposium on Small Satellites for Earth Observation ; (6, 2007, Berlin)
SP  - 147
EP  - 150
PB  - Wissenschaft und Technik Verl.
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Wittmann, Klaus
A1  - Bibring, J.-P.
A1  - Rosenbauer, H.
A1  - Boehnhardt, H.
T1  - The Rosetta Lander (“Philae”) Investigations  / Bibring, J.-P. ; Rosenbauer, H. ; Boehnhardt, H. ;  [...] Wittmann, K.
JF  - Space Science Reviews. 128 (2007), H. 1-4
Y1  - 2007
SN  - 0038-6308
SP  - 205
EP  - 220
ER  - 
TY  - JOUR
A1  - Overduin, James
A1  - Blome, Hans-Joachim
A1  - Hoell, Josef
T1  - Wolfgang Priester: from the big bounce to the Lambda-dominated universe
JF  - Naturwissenschaften
Y1  - 2007
SN  - 0028-1042
VL  - 94
IS  - 6
SP  - 417
EP  - 429
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Robinson, A. E.
T1  - Development of a new test rig for a micro scale hydrogen combustion chamber
JF  - Proceedings of the 2nd European Conference for Aero-Space Sciences : July 1 - 6, 2007, Brussels, Belgium
Y1  - 2007
N1  - European Conference for Aerospace Sciences <2, 2007, Brüssel> ; EUCASS <2, 2007, Brüssel> ; Paper No. 22
SP  - 1
EP  - 8
PB  - -
ER  - 
TY  - JOUR
A1  - Bécret, P.
A1  - Grossen, J.
A1  - Trilla, J.
A1  - Robinson, A.
A1  - Bosschaerts, W.
A1  - Funke, Harald
A1  - Hendrick, P.
T1  - Testing and numerical study of a 10 kW hydrogen micro combustor
JF  - International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications <7, 2007, Freiburg, Breisgau>  ; PowerMEMS ; 7
Y1  - 2007
SP  - 367
EP  - 370
ER  - 
TY  - JOUR
A1  - Robinson, A. E.
A1  - Rönna, Uwe
A1  - Funke, Harald
T1  - Testing of a 10 kW diffusive micro-mix combustor for hydrogen-fuelled micro-scale gas turbines
JF  - International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications <7, 2007, Freiburg, Breisgau>  ; PowerMEMS ; 7
Y1  - 2007
SP  - 225
EP  - 228
ER  - 
TY  - JOUR
A1  - McArdell, Brian W.
A1  - Bartelt, Perry
A1  - Kowalski, Julia
T1  - Field observations of basal forces and fluid pore pressure in a debris flow
JF  - Geophysical Research Letters (GRL)
N2  - Using results from an 8 m2 instrumented force plate we describe field measurements of normal and shear stresses, and fluid pore pressure for a debris flow. The flow depth increased from 0.1 to 1 m within the first 12 s of flow front arrival, remained relatively constant until 100 s, and then gradually decreased to 0.5 m by 600 s. Normal and shear stresses and pore fluid pressure varied in-phase with the flow depth. Calculated bulk densities are ρb = 2000–2250 kg m−3 for the bulk flow and ρf = 1600–1750 kg m−3 for the fluid phase. The ratio of effective normal stress to shear stress yields a Coulomb basal friction angle of ϕ = 26° at the flow front. We did not find a strong correlation between the degree of agitation in the flow, estimated using the signal from a geophone on the force plate, and an assumed dynamic pore fluid pressure. Our data support the idea that excess pore-fluid pressures are long lived in debris flows and therefore contribute to their unusual mobility.
KW  - debris flow
Y1  - 2007
SN  - 0094-8276
VL  - 34
IS  - 7
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - Bartelt, Perry
A1  - McElwaine, J.
T1  - Two-phase debris flow modeling
T2  - Geophysical Research Abstracts
Y1  - 2007
N1  - A-08119
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Chen, B.-H.
A1  - Ballmann, Josef
T1  - Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Wellmer, Georg
A1  - Chen, B.-H.
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Numerical prediction of aeroelastic effects on twin-sting-rig mounted models for rear fuselage and empennage flow investigation in transonic windtunnel
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics, June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Computational study of the aeroelastic equilibrium configuration of a swept wind tunnel wing model in subsonic flow
T2  - High performance computing in science and engineering '06. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2006 /  Wolfgang E. Nagel ... Eds.
N2  - In the Collaborative Research Center SFB 401 at RWTH Aachen University, the numerical aeroelastic method SOFIA for direct numerical aeroelastic simulation is being progressively developed. Numerical results obtained by applying SOFIA were compared with measured data of static and dynamic aeroelastic wind tunnel tests for an elastic swept wing in subsonic flow.
Y1  - 2007
SN  - 978-3-540-36165-7
SP  - 421
EP  - 434
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - RPRT
A1  - Reimer, Lars
A1  - Wellmer, Georg
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Aerodynamische Simulation und Optimierung in der Flugzeugentwicklung. Teilvorhabenbezeichnung: Aerodynamische Optimierung unter Berücksichtigung von Struktureigenschaften auf der Basis reduzierter Strukturmodelle, Verbundvorhaben MEGADESIGN. Schlussbericht. Berichtszeitraum: 01.06.2003-31.05.2007. BMBF-Forschungsbericht
Y1  - 2007
ER  - 
TY  - BOOK
A1  - Braun, Carsten
T1  - Ein modulares Verfahren für die numerische aeroelastische Analyse von Luftfahrzeugen
N2  - Aachen, Techn. Hochschule, Diss., 2007
Y1  - 2007
ER  - 
TY  - JOUR
A1  - Henn, Gudrun
A1  - Polaczek, Christa
T1  - Studienerfolg in den Ingenieurwissenschaften
JF  - Das Hochschulwesen : HSW ; Forum für Hochschulforschung, -praxis und -politik
Y1  - 2007
SN  - 0018-2974
VL  - 55
IS  - 5
SP  - 144
EP  - 147
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. Bd. 1
Y1  - 2007
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. Bd. 2
Y1  - 2007
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
T1  - Low-Thrust Mission Analysis and Global Trajectory Optimization Using Evolutionary Neurocontrol: New Results
T2  - European Workshop on Space Mission Analysis ESA/ESOC, Darmstadt, Germany 10 { 12 Dec 2007
N2  - Interplanetary trajectories for low-thrust spacecraft are often characterized by multiple revolutions around the sun. Unfortunately, the convergence of traditional trajectory optimizers that are based on numerical optimal control methods depends strongly on an adequate initial guess for the control function (if a direct method is used) or for the starting values of the adjoint vector (if an indirect method is used). Especially when many revolutions around the sun are re-
quired, trajectory optimization becomes a very difficult and time-consuming task that involves a lot of experience and expert knowledge in astrodynamics and optimal control theory, because an adequate initial guess is extremely hard to find. Evolutionary neurocontrol (ENC) was proposed as a smart method for low-thrust trajectory optimization that fuses artificial neural networks and evolutionary algorithms to so-called evolutionary neurocontrollers (ENCs) [1]. Inspired by natural archetypes, ENC attacks the trajectoryoptimization problem from the perspective of artificial intelligence and machine learning, a perspective that is quite different from that of optimal control theory. Within the context of ENC, a trajectory is regarded as the result of a spacecraft steering strategy that maps permanently the actual spacecraft state and the actual target state onto the actual spacecraft control vector. This way, the problem of searching the optimal spacecraft trajectory is equivalent to the problem of searching (or "learning") the optimal spacecraft steering strategy. An artificial neural network is used to implement such a spacecraft steering strategy. It can be regarded as a parameterized function (the network function) that is defined by the internal network parameters. Therefore, each distinct set of network parameters defines a different network function and thus a different steering strategy. The problem of searching the optimal steering strategy is now equivalent to the problem of searching the optimal set of network parameters. Evolutionary algorithms that work on a population of (artificial) chromosomes are used to find the optimal network parameters, because the parameters can be easily mapped onto a chromosome. The trajectory optimization problem is solved when the optimal chromosome is found. A comparison of solar sail trajectories that have been published by others [2, 3, 4, 5] with ENC-trajectories has shown that ENCs can be successfully applied for near-globally optimal spacecraft control [1, 6] and that they are able to find trajectories that are closer to the (unknown) global optimum, because they explore the trajectory search space more exhaustively than a human expert can do. The obtained trajectories are fairly accurate with respect to the terminal constraint. If a more accurate trajectory is required, the ENC-solution can be used as an initial guess for a local trajectory optimization method. Using ENC, low-thrust trajectories can be optimized without an initial guess and without expert attendance.
Here, new results for nuclear electric spacecraft and for solar sail spacecraft are presented and it will be shown that ENCs find very good trajectories even for very difficult problems. Trajectory optimization results are presented for 1. NASA's Solar Polar Imager Mission, a mission to attain a highly inclined close solar orbit with a solar sail [7] 2. a mission to de ect asteroid Apophis with a solar sail from a retrograde orbit with a very-high velocity impact [8, 9] 3. JPL's \2nd Global Trajectory Optimization Competition", a grand tour to visit four asteroids from different classes with a NEP spacecraft
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
A1  - Loeb, Horst W.
A1  - Schartner, Karl-Heinz
T1  - A comparison of SEP and NEP for a main belt asteroid sample return mission
T2  - 7th International Symposium on Launcher Technologies, Barcelona, Spain, 02-05 April 2007
N2  - Innovative interplanetary deep space missions, like a main belt asteroid sample
return mission, require ever larger velocity increments (∆V s) and thus ever
more demanding propulsion capabilities. Providing much larger exhaust velocities than chemical high-thrust systems, electric low-thrust space-propulsion
systems can significantly enhance or even enable such high-energy missions. In
1995, a European-Russian Joint Study Group (JSG) presented a study report
on “Advanced Interplanetary Missions Using Nuclear-Electric Propulsion”
(NEP). One of the investigated reference missions was a sample return (SR)
from the main belt asteroid (19) Fortuna. The envisaged nuclear power plant,
Topaz-25, however, could not be realized and also the worldwide developments
in space reactor hardware stalled. In this paper, we investigate, whether such
a mission is also feasible using a solar electric propulsion (SEP) system and
compare our SEP results to corresponding NEP results.
Y1  - 2007
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Kahle, Ralph
A1  - Wie, Bong
T1  - Head-on impact deflection of NEAs: a case study for 99942 Apophis
T2  - Planetary Defense Conference 2007
N2  - Near-Earth asteroid (NEA) 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several less than 1 km-sized gravitational keyholes during its 2029-encounter. A pre-2029 kinetic impact is a very favorable option to nudge the asteroid out of a keyhole. The highest impact velocity and thus deflection can be achieved from a trajectory that is retrograde to Apophis orbit. With a chemical or electric propulsion system, however, many gravity assists and thus a long time is required to achieve this. We show in this paper that the solar sail might be the better propulsion system for such a mission: a solar sail Kinetic Energy Impactor (KEI) spacecraft could impact Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages. The spacecraft consists of a 160 m × 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. For a launch in 2020, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, the solar sail KEI concept is still feasible to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value
Y1  - 2007
N1  - Planetary Defense Conference 2007, Wahington D.C., USA, 05-08 March 2007
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Loeb, Horst Wolfgang
A1  - Schartner, Karl-Heinz
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
T1  - SEP-Sample return from a main belt asteroid
T2  - 30th International Electric Propulsion Conference
N2  - By DLR-contact, sample return missions to the large main-belt asteroid “19, Fortuna” have been studied. The mission scenario has been based on three ion thrusters of the RIT-22 model, which is presently under space qualification, and on solar arrays equipped with triple-junction GaAs solar cells. After having designed the spacecraft, the orbit-to-orbit trajectories for both, a one-way SEP mission with a chemical sample return and an all-SEP return mission, have been optimized using a combination of artificial neural networks with evolutionary algorithms. Additionally, body-to-body trajectories have been
investigated within a launch period between 2012 and 2015. For orbit-to-orbit calculation, the launch masses of the hybrid mission and of the all-SEP mission resulted in 2.05 tons and 1.56 tons, respectively, including a scientific payload of 246 kg. For the related transfer
durations 4.14 yrs and 4.62 yrs were obtained. Finally, a comparison between the mission scenarios based on SEP and on NEP have been carried out favouring clearly SEP.
Y1  - 2007
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Mengali, Giovanni
A1  - Quarta, Alessandro A
A1  - Macdonald, Malcolm
A1  - McInnes, Colin R
T1  - Optical solar sail degradation modelling
T2  - 1st International Symposium on Solar Sailing
N2  - We propose a simple parametric OSSD model that describes the variation of the sail film's optical coefficients with time, depending on the sail film's environmental history, i.e., the radiation dose. The primary intention of our model is not to describe the exact behavior of specific film-coating combinations in the real space environment, but to provide a more general parametric framework for describing the general optical degradation behavior of solar sails.
Y1  - 2007
N1  - 1st International Symposium on Solar Sailing 27–29 June 2007, Herrsching, Germany
SP  - 1
EP  - 27
ER  - 
TY  - CHAP
A1  - Weiss, Alexander
A1  - Abanteriba, Sylvester
A1  - Esch, Thomas
T1  - Investigation of Flow Separation Inside a Conical Rocket Nozzle With the Aid of an Annular Cross Flow
T2  - Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B
N2  - Flow separation is a phenomenon that occurs in all kinds of supersonic nozzles sometimes during run-up and shut-down operations. Especially in expansion nozzles of rocket engines with large area ratio, flow separation can trigger strong side loads that can damage the structure of the nozzle. The investigation presented in this paper seeks to establish measures that may be applied to alter the point of flow separation. In order to achieve this, a supersonic nozzle was placed at the exit plane of the conical nozzle. This resulted in the generation of cross flow surrounding the core jet flow from the conical nozzle. Due to the entrainment of the gas stream from the conical nozzle the pressure in its exit plane was found to be lower than that of the ambient. A Cold gas instead of hot combustion gases was used as the working fluid. A mathematical simulation of the concept was validated by experiment. Measurements confirmed the simulation results that due to the introduction of a second nozzle the pressure in the separated region of the conical nozzle was significantly reduced. It was also established that the boundary layer separation inside the conical nozzle was delayed thus allowing an increased degree of overexpansion. The condition established by the pressure measurements was also demonstrated qualitatively using transparent nozzle configurations.
Y1  - 2007
SN  - 0-7918-4288-6
U6  - http://dx.doi.org/10.1115/FEDSM2007-37387
N1  - Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B. San Diego, California, USA. July 30–August 2, 2007
SP  - 1861
EP  - 1871
PB  - American Society of Mechanical Engineers (ASME)
CY  - New York
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Seboldt, W.
A1  - Loeb, H. W
A1  - Schartner, K.-H.
T1  - Main Belt Asteroid Sample Return Mission Using Solar Electric Propulsion
JF  - Acta Astronautica. 63 (2008), H. 1-4
Y1  - 2008
SN  - 0094-5765
N1  - International Astronautical Federation Congress <58, 2007, Hyderabad> ; International Astronautical Congress <58, 2007, Hyderabad> ; IAC-07-A3.5.07
SP  - 91
EP  - 101
ER  - 
TY  - BOOK
A1  - Ley, Wilfried
T1  - Handbuch der Raumfahrttechnik / Ley, Wilfried ; Wittmann, Klaus ; Hallmann, Willi [Hrsg.]
Y1  - 2008
SN  - 978-3-446-41185-2
PB  - Hanser
CY  - München
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Seboldt, W.
T1  - Solar Sails — Propellantless Propulsion for Near- and Medium-Term Deep-Space Missions  / W. Seboldt ; B. Dachwald
JF  - Advanced Propulsion Systems and Technologies, Today to 2020 / Claudio Bruno (ed.) ... - (Progress in Astronautics and Aeronautics Series ; 223)
Y1  - 2008
SN  - 978-1-56347-929-8
N1  - ISBN 10: 1-56347-929-X  ; American Institute of Aeronautics and Astronautics <New York, NY>
PB  - AIAA
CY  - Reston, Va.
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Seboldt, W.
A1  - Lämmerzahl, W.
T1  - Solar Sail Propulsion: An Enabling Technology for Fundamental Physics Missions
JF  - Lasers, Clocks and Drag Free Control : Exploration of Relativistic Gravity in Space / by Hansjörg Dittus ..., eds. - ( Astrophysics and Space Science Library ; 349)
Y1  - 2008
SN  - 978-3-540-34376-9
SP  - 379
EP  - 398
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - BOOK
A1  - Wittmann, Klaus
A1  - Ley, Wilfried [Hrsg.]
A1  - Hallmann, Willi [Hrsg.]
T1  - Handbuch der Raumfahrttechnik : mit 128 Tabellen / Wilfried Ley; Klaus Wittmann; Willi Hallmann (Hrsg.) 3., völlig neu bearb. und erw. Aufl.
Y1  - 2008
SN  - 978-3-446-41185-2
PB  - Hanser
CY  - München
ER  - 
TY  - BOOK
A1  - Esch, Thomas
A1  - Appel, Wolfgang
A1  - Höpke, Friedrich
T1  - Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten ; mit 35 Tabellen / Appel, Wolfgang ; Höpke, Friedrich ... Esch, Thomas [u.a.] 5., vollst. überarb. Aufl.
Y1  - 2008
SN  - 978-3-8348-0374-0
PB  - Vieweg + Teubner
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Trilla, Joan
A1  - Grossen, Jürgen
A1  - Robinson, Alexander
A1  - Funke, Harald
A1  - Bosschaerts, Walter
A1  - Hendrick, Patrick
T1  - Development of a hydrogen combustion chamber for an ultra micro gas turbine
JF  - PowerMEMS 2008, 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, microEMS 2008, 2nd Symposium on Micro Environmental Machine Systems, Sendai, JP, Nov 9-12, 2008
Y1  - 2008
SP  - 101
EP  - 104
ER  - 
TY  - JOUR
A1  - Robinson, A. E.
A1  - Funke, Harald
A1  - Hendrick, P.
A1  - Recker, E.
A1  - Peirs, J.
T1  - Development of a hydrogen fuelled 1 kW ultra micro gas turbine with special respect to designing, testing and mapping of the µ-scale combustor
JF  - IEEE International Conference on Sustainable Energy Technologies, 2008 : ICSET 2008 ; Singapore, 24 - 27 Nov. 2008.
Y1  - 2008
SN  - 978-1-4244-1887-9
SP  - 656
EP  - 660
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - BOOK
A1  - Funke, Harald
T1  - Optimierung und Miniaturisierung der Mikro-Misch-Diffusionsverbrennung von Wasserstoff zur potentiellen Anwendung in einer Ultra-Gasturbine. Schlussbericht.
Y1  - 2008
N1  - Förderkennzeichen: 1729X05
PB  - Fachhochschule Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Havermann, Marc
A1  - Haertig, J.
A1  - Rey, C.
A1  - George, A.
T1  - PIV Measurements in Shock Tunnels and Shock Tubes / Havermann, M. ; Haertig, J. ; Rey, C. ; George, A.
JF  - Particle Image Velocimetry : New Developments and Recent Applications
Y1  - 2008
SN  - 978-3-540-73528-1
N1  - Topics in applied physics. Vol 112.
SP  - 429
EP  - 442
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Havermann, Marc
A1  - Seiler, F.
A1  - Georges, A.
A1  - Srulijes, J.
T1  - Progress in Doppler picture velocimetry (DPV) / Seiler, F. ; George, A. ; Srulijes, J. ; Havermann, M.
JF  - Experiments in Fluids. 44 (2008), H. 3
Y1  - 2008
SN  - 1432-1114
SP  - 389
EP  - 395
PB  - -
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Rönna, Uwe
A1  - Robinson, A. E.
T1  - Development and testing of a 10 kW diffusive micromix combustor for hydrogen-fuelled μ-scale gas turbines
JF  - Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air ; GT2008 ; June 9-13, 2008, Berlin, Germany
Y1  - 2008
N1  - GT2008-50418
SP  - 1
EP  - 8
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Christen, Marc
A1  - Bartelt, Perry
A1  - Kowalski, Julia
A1  - Stoffel, Lukus
T1  - Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS
T2  - Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008
N2  - Numerical models have become an essential part of snow avalanche engineering. Recent
advances in understanding the rheology of flowing snow and the mechanics of entrainment and
deposition have made numerical models more reliable. Coupled with field observations and historical
records, they are especially helpful in understanding avalanche flow in complex terrain. However, the
application of numerical models poses several new challenges to avalanche engineers. A detailed
understanding of the avalanche phenomena is required to specify initial conditions (release zone
dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer
based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this
paper we discuss these problems by presenting the computer model RAMMS, which was specially
designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged
equations governing avalanche flow with first and second-order numerical solution schemes. A
tremendous effort has been invested in the implementation of advanced input and output features.
Simulation results are therefore clearly and easily visualized to simplify their interpretation. More
importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model
performance. In this paper we present the governing differential equations, highlight some of the input
and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that
occurred in April 2008, near Klosters/Monbiel, Switzerland.
KW  - snow
KW  - avalanche
Y1  - 2008
SP  - 709
EP  - 716
ER  - 
TY  - JOUR
A1  - Kowalski, Julia
T1  - Mathematische Murgangmodellierung
JF  - Newsletter Naturgefahren
Y1  - 2008
VL  - 2008
IS  - 2
SP  - 4
EP  - 5
ER  - 
TY  - THES
A1  - Kowalski, Julia
T1  - Two-phase Modeling of Debris Flows
Y1  - 2008
SN  - 978-3-86664-524-0
N1  - Diss., Eidgenössische Technische Hochschule ETH Zürich, Nr. 17827, 2008
PB  - Mensch und Buch
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - McElwaine, J.
T1  - Two-phase debris flow modeling
T2  - Geophysical Research Abstracts
Y1  - 2008
N1  - A-01048
ER  - 
TY  - JOUR
A1  - Polaczek, Christa
A1  - Henn, Gudrun
T1  - Gute Vorkenntnisse verkürzen die Studienzeit
JF  - Mathematikinformation : eine Zeitschrift von Begabtenförderung Mathematik e.V.
Y1  - 2008
SN  - 1612-9156
VL  - 2008
IS  - 49
SP  - 46
EP  - 50
PB  - Begabtenförderung Mathematik
CY  - Neubiberg
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Verbrennungstechnik : Vorlesungsumdruck. 7. Aufl.
Y1  - 2008
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Nowack, N.
A1  - Röth, Thilo
A1  - Bührig-Polaczek, A.
A1  - Klaus, G.
ED  - Hirsch, Jürgen
T1  - Advanced Sheet Metal Components Reinforced by Light Metal Cast Structures
T2  - Aluminium alloys : their physical and mechanical properties ; [proceedings of the 11th International Conference on Aluminium Alloys, 22 - 26 Sept. 2008, Aachen, Germany ; ICAA 11]
Y1  - 2008
SN  - 978-3-527-32367-8
IS  - 2
SP  - 2374
EP  - 2381
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Ohndorf, A.
A1  - Gill, E.
T1  - Optimization of low-thrust Earth-Moon transfers using evolutionary neurocontrol  / Ohndorf, A. ; Dachwald, B. ; Gill, E.
JF  - IEEE Congress on Evolutionary Computation, 2009. CEC '09.
Y1  - 2009
SN  - 978-1-4244-2958-5
SP  - 358
EP  - 364
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Carnelli, Ian
A1  - Vasile, Massimiliano
T1  - Evolutionary Neurocontrol: A Novel Method for Low-Thrust Gravity-Assist Trajectory Optimization / Carnelli, Ian ; Dachwald, Bernd ; Vasile, Massimiliano
JF  - Journal of guidance control and dynamics. 32 (2009), H. 2
Y1  - 2009
SN  - 0731-5090
SP  - 616
EP  - 625
PB  - AIAA
CY  - Reston, Va.
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Ball, Andrew J.
A1  - Ulamec, Stephan
A1  - Price, Michael E.
T1  - A small mission for in situ exploration of a primitive binary near-Earth asteroid  / Ball, Andrew J. ; Ulamec, Stephan ; Dachwald, Bernd ; Price, Michael E. ; [u.a.]
JF  - Advances in Space Research. 43 (2009), H. 2
Y1  - 2009
SN  - 0273-1177
SP  - 317
EP  - 324
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - BOOK
A1  - Ley, Wilfried
A1  - Wittmann, Klaus
A1  - Hallmann, Willi
T1  - Handbook of space technology
Y1  - 2009
SN  - 978-0-470-69739-9
PB  - Wiley
CY  - Chichester
ER  - 
TY  - JOUR
A1  - Röth, Thilo
A1  - Nowack, Niels
A1  - Oberschelp, Christian
A1  - Lao, Bin
T1  - Gute Perspektiven für Stahl-Alumnium-Hybride im Automotivebereich / Nowack, Niels ; Oberschelp, Christian ; Lao, Bin ; Klaus, Gerald ; Bührig-Polaczek, Andreas ; Röth, Thilo
JF  - Giesserei : die Zeitschrift für Technik, Innovation und Management. 96 (2009), H. 5
Y1  - 2009
SN  - 0016-9765
SP  - 110
EP  - 123
ER  - 
TY  - JOUR
A1  - Röth, Thilo
A1  - Kern, Daniel
A1  - Kirchner, Karsten
A1  - Vietor, Thomas
T1  - Flexbody : Baukastensystem für Karosseriestrukturen / Kern, Daniel ; Röth, Thilo ; Kirchner, Karsten ; Vietor, Thomas
JF  - Mobiles : Fachzeitschrift für Konstrukteure. 35 (2009), H. 2009/2010
Y1  - 2009
SP  - 73
EP  - 75
PB  - Hochsch. für Angewandte Wiss.
CY  - Hamburg
ER  - 
TY  - CHAP
A1  - Röth, Thilo
A1  - Stark, R.
T1  - Die Rolle der virtuellen Produktentstehung bei der Integration von Karosseriesystemen
T2  - Karosseriekongress Systemintegration in der Karosserietechnik : 17. und 18. März 2009 in Baden-Baden / Kongressleitung: Reiner Stark
Y1  - 2009
SN  - 978-3-9812624-4-5
N1  - Karosseriekongress ; (2009.03.17-18 : ; Baden-Baden)
PB  - VDI-Wissensforum
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Wilson, T. L.
A1  - Blome, Hans-Joachim
T1  - The Pioneer anomaly and a rotating Gödel universe
JF  - Advances in Space Research
Y1  - 2009
SN  - 0273-1177
VL  - 44
IS  - 11
SP  - 1345
EP  - 1353
ER  - 
TY  - JOUR
A1  - Robinson, A. E.
A1  - Funke, Harald
A1  - Wagemakers, R.
A1  - Grossen, J.
A1  - Bosschaerts, W.
A1  - Hendrick, P.
T1  - Numerical and Experimental Investigation of a Micromix Combustor for a Hydrogen Fuelled μ-Scale Gas Turbine
JF  - Proceedings of the ASME Turbo Expo 2009 : : presented at the 2009 ASME Turbo Expo, June 8 - 12, 2009, Orlando, Florida, USA / sponsored by the International Gas Turbine Institute
Y1  - 2009
SN  - 9780791848869
N1  - GT2009-60061
SP  - 253
EP  - 262
PB  - ASME
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Pichler, A.
A1  - George, A.
A1  - Seiler, F.
A1  - Srulijes, J.
A1  - Havermann, Marc
T1  - Doppler Picture Velocimetry (DPV) applied to hypersonics
JF  - Shock Waves [Elektronische Ressource] : 26th International Symposium on Shock Waves, Volume 1 / edited by Klaus Hannemann, Friedrich Seiler
Y1  - 2009
SN  - 978-3-540-85168-4
N1  - International Symposium on Shock Waves ; (26 ; 2007.07.15-20 ; Göttingen) ; ISSW ; (26 ; 2007.07.15-20 ; Göttingen)
SP  - 503
EP  - 508
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Fischer, Jan-Thomas
A1  - Kowalski, Julia
A1  - Pudasaini, Shiva P.
A1  - Miller, S. A.
T1  - Dynamic Avalanche Modeling in Natural Terrain
JF  - International Snow Science Workshop, Davos 2009, Proceedings ; Proc. ISSW 2009
N2  - The powerful avalanche simulation toolbox RAMMS (Rapid Mass Movements) is based on a depth-averaged
hydrodynamic system of equations with a Voellmy-Salm friction relation. The two empirical friction parameters
μ and �  correspond to a dry Coulomb friction and a viscous resistance, respectively. Although μ and � lack a
proper physical explanation, 60 years of acquired avalanche data in the Swiss Alps made a systematic calibration
possible. RAMMS can therefore successfully model avalanche flow depth, velocities, impact pressure and run
out distances. Pudasaini and Hutter (2003) have proposed extended, rigorously derived model equations that
account for local curvature and twist. A coordinate transformation into a reference system, applied to the actual
mountain topography of the natural avalanche path, is performed. The local curvature and the twist of the
avalanche path induce an additional term in the overburden pressure. This leads to a modification of the Coulomb
friction, the free-surface pressure gradient, the pressure induced by the channel, and the gravity components
along and normal to the curved and twisted reference surface. This eventually guides the flow dynamics and
deposits of avalanches. In the present study, we investigate the influence of curvature on avalanche flow in
real mountain terrain. Simulations of real avalanche paths are performed and compared for the different models
approaches. An algorithm to calculate curvature in real terrain is introduced in RAMMS. This leads to a curvature
dependent friction relation in an extended version of the Voellmy-Salm model equations. Our analysis provides
yet another step in interpreting the physical meaning and significance of the friction parameters used in the
RAMMS computational environment.
KW  - snow
KW  - avalanche
Y1  - 2009
SP  - 448
EP  - 452
ER  - 
TY  - CHAP
A1  - Börner, Sebastian
A1  - Funke, Harald
A1  - Hendrick, P.
A1  - Recker, E.
T1  - LES of Jets In Cross-Flow and Application to the “Micromix” Hydrogen Combustion
T2  - XIX International Symposium on Air Breathing Engines 2009 (ISABE 2009) : Proceedings of a meeting held 7-11 September 2009, Montreal, Canada
Y1  - 2009
SN  - 9781615676064
SP  - 1555
EP  - 1561
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - Bugnion, Louis
T1  - An extended shallow flow theory for natural debris flows
Y1  - 2009
N1  - 2009 Portland GSA Annual Meeting (18-21 October 2009); Geological Society of America
VL  - 41
IS  - 7
SP  - 609
EP  - 609
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Wellmer, Georg
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Computational methods for aero-structural analysis and optimisation of aircrafts based on reduced-order structural models
T2  - MEGADESIGN and MegaOpt - German initiatives for aerodynamic simulation and optimization in aircraft design. Results of the closing symposium of the MEGADESIGN and MegaOpt projects, Braunschweig, Germany, 23 - 24 May, 2007 / Norbert Kroll ... (Eds.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 107
N2  - In this part of the MEGADESIGN project, aeroelastic effects are introduced into the aerodynamic analysis of aircrafts by coupling DLR’s flow solvers TAU and FLOWer to a Timoshenko-beam solver. The emerging aeroelastic solvers and a method for the automatic identification of Timoshenko-beam models for wing-box structures were integrated into a simulation environment enabling the combined optimisation of aerodynamic wing shape and structure.
Y1  - 2009
SN  - 978-3-642-04092-4
SP  - 135
EP  - 150
PB  - Springer
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Raumfahrtantriebe. 7. Aufl., [Umdruck]
Y1  - 2009
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Gehler, M.
A1  - Ober-Blöbaum, S.
A1  - Dachwald, Bernd
T1  - Application of discrete mechanics and optimal control to spacecraft in non-keplerian motion around small solar system bodies
T2  - Procceedings of the 60th International Astronautical Congress
N2  - Prolonged operations close to small solar system bodies require a sophisticated control logic to minimize propellant mass and maximize operational efficiency. A control logic based on Discrete Mechanics and Optimal Control (DMOC) is proposed and applied to both conventionally propelled and solar sail spacecraft operating at an arbitrarily shaped asteroid in the class of Itokawa. As an example, stand-off inertial hovering is considered, recently identified as a challenging part of the Marco Polo mission. The approach is easily extended to stand-off orbits. We show that DMOC is applicable to spacecraft control at small objects, in particular with regard to the fact that the changes in gravity are exploited by the algorithm to optimally control the spacecraft position. Furthermore, we provide some remarks on promising developments.
KW  - Spacecraft
Y1  - 2009
SN  - 978-161567908-9
N1  - 60th International Astronautical Congress 2009, IAC 2009; Daejeon; South Korea; 12 October 2009 through 16 October 2009
SP  - 1360
EP  - 1371
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Wurm, P.
T1  - Design concept and modeling of an advanced solar photon thruster
T2  - Advances in the Astronautical Sciences
N2  - The so-called "compound solar sail", also known as "Solar Photon Thruster" (SPT), holds the potential of providing significant performance advantages over the flat solar sail. Previous SPT design concepts, however, do not consider shadowing effects and multiple reflections of highly concentrated solar radiation that would inevitably destroy the gossamer sail film. In this paper, we propose a novel advanced SPT (ASPT) design concept that does not suffer from these oversimplifications. We present the equations that describe the thrust force acting on such a sail system and compare its performance with respect to the conventional flat solar sail.
KW  - solar sails
Y1  - 2009
SN  - 978-087703554-1
SN  - 00653438
N1  - 19th AAS/AIAA Space Flight Mechanics Meeting; Savannah, GA; United States; 8 February 2009 through 12 February 2009
SP  - 723
EP  - 740
PB  - American Astronautical Society
CY  - San Diego, Calif.
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Wurm, P.
T1  - Mission analysis for an advanced solar photon thruster
T2  - 60th International Astronautical Congress 2009, IAC 2009
N2  - The so-called "compound solar sail", also known as "Solar Photon Thruster" (SPT), is a solar sail design concept, for which the two basic functions of the solar sail, namely light collection and thrust direction, are uncoupled. In this paper, we introduce a novel SPT concept, termed the Advanced Solar Photon Thruster (ASPT). This model does not suffer from the simplified assumptions that have been made for the analysis of compound solar sails in previous studies. We present the equations that describe the force, which acts on the ASPT. After a detailed design analysis, the performance of the ASPT with respect to the conventional flat solar sail (FSS) is investigated for three interplanetary mission scenarios: An Earth-Venus rendezvous, where the solar sail has to spiral towards the Sun, an Earth-Mars rendezvous, where the solar sail has to spiral away from the Sun, and an Earth-NEA rendezvous (to near-Earth asteroid 1996FG3), where a large orbital eccentricity change is required. The investigated solar sails have realistic near-term characteristic accelerations between 0.1 and 0.2mm/s2. Our results show that a SPT is not superior to the flat solar sail unless very idealistic assumptions are made.
KW  - Interplanetary flight
Y1  - 2009
SN  - 978-161567908-9
N1  - 60th International Astronautical Congress 2009, IAC 2009; Daejeon; South Korea; 12 October 2009 through 16 October 2009
VL  - Vol. 8
SP  - 6838
EP  - 6851
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Schartner, Karl-Heinz
A1  - Loeb, H. W.
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
T1  - Perspectives of electric propulsion for outer planetary and deep space missions
T2  - European Planetary Science Congress 2009
N2  - Solar-electric propulsion (SEP) is superior with
respect to payload capacity, flight time and
flexible launch window to the conventional
interplanetary transfer method using chemical
propulsion combined with gravity assists. This fact
results from the large exhaust velocities of electric
low–thrust propulsion and is favourable also for
missions to the giant planets, Kuiper-belt objects
and even for a heliopause probe (IHP) as shown in
three studies by the authors funded by DLR. They
dealt with a lander for Europa and a sample return
mission from a mainbelt asteroid [1], with the
TANDEM mission [2]; the third recent one
investigates electric propulsion for the transfer to
the edge of the solar system.
All studies are based on triple-junction solar arrays,
on rf-ion thrusters of the qualified RIT-22 type and
they use the intelligent trajectory optimization
program InTrance [3].
Y1  - 2009
N1  - European Planetary Science Congress 2009, 13-18 September, Potsdam, Germany
SP  - 416
EP  - 416
ER  - 
TY  - CHAP
A1  - Spurmann, Jörn
A1  - Ohndorf, Andreas
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
A1  - Löb, Horst
A1  - Schartner, Karl-Heinz
T1  - Interplanetary trajectory optimization for a sep mission to Saturn
T2  - 60th International Astronautical Congress 2009
N2  - The recently proposed NASA and ESA missions to Saturn and Jupiter pose difficult tasks to mission designers because chemical propulsion scenarios are not capable of transferring heavy spacecraft into the outer solar system without the use of gravity assists. Thus our developed mission scenario based on the joint NASA/ESA Titan Saturn System Mission baselines solar electric propulsion to improve mission flexibility and transfer time. For the calculation of near-globally optimal low-thrust trajectories, we have used a method called Evolutionary Neurocontrol, which is implemented in the low-thrust trajectory optimization software InTrance. The studied solar electric propulsion scenario covers trajectory optimization of the interplanetary transfer including variations of the spacecraft's thrust level, the thrust unit's specific impulse and the solar power generator power level. Additionally developed software extensions enabled trajectory optimization with launcher-provided hyperbolic excess energy, a complex solar power generator model and a variable specific impulse ion engine model. For the investigated mission scenario, Evolutionary Neurocontrol yields good optimization results, which also hold valid for the more elaborate spacecraft models. Compared to Cassini/Huygens, the best found solutions have faster transfer times and a higher mission flexibility in general.
KW  - Spacecraft
KW  - Reusable Rocket Engines
KW  - Hybrid Propellants
Y1  - 2009
SN  - 9781615679089
N1  - 60th International Astronautical Congress 2009 (IAC 2009)
Held 12-16 October 2009, Daejeon, Republic of Korea.
SP  - 5234
EP  - 5248
ER  - 
TY  - CHAP
A1  - Kemper, Hans
A1  - Hellenbroich, Gereon
A1  - Esch, Thomas
T1  - Concept of an innovative passenger-car hybrid drive for European driving conditions
T2  - Hybrid vehicles and energy management : 6th symposium ; 18th and 19th February 2009, Stadthalle Braunschweig
N2  - The downsizing of spark ignition engines in conjunction with turbocharging is considered to be a promising method for reducing CO₂ emissions. Using this concept, FEV has developed a new, highly efficient drivetrain to demonstrate fuel consumption reduction and drivability in a vehicle based on the Ford Focus ST. The newly designed 1.8L turbocharged gasoline engine incorporates infinitely variable intake and outlet control timing and direct fuel injection utilizing piezo injectors centrally located. In addition, this engine uses a prototype FEV engine control system, with software that was developed and adapted entirely by FEV. The vehicle features a 160 kW engine with a maximum mean effective pressure of 22.4 bar and 34 % savings in simulated fuel consumption. During the first stage, a new electrohydraulically actuated hybrid transmission with seven forward gears and one reverse gear and a single dry starting clutch will be integrated. The electric motor of the hybrid is directly connected to the gear set of the transmission. Utilizing the special gear set layout, the electric motor can provide boost during a change of gears, so that there is no interruption in traction. Therefore, the transmission system combines the advantages of a double clutch controlled gear change (gear change without an interruption in traction) with the efficient, cost-effective design of an automated manual transmission system. Additionally, the transmission provides a purely electric drive system and the operation of an air-conditioning compressor during the engine stop phases. One other alternative is through the use of CAI (Controlled Auto Ignition), which incorporates a process developed by FEV for controlled compression ignition.
Y1  - 2009
SN  - 978-3-937655-20-8
SP  - 264
EP  - 287
PB  - Gesamtzentrum für Verkehr (GZVB)
CY  - Braunschweig
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Esch, Thomas
A1  - Roosen, Peter
ED  - Bartz, Wilfried J.
T1  - Using motor gasoline for aircrafts - coping with growing bio-fuel-caused risks by understanding cause-effect relationship
T2  - Fuels 2009 : mineral oil based and alternative fuels ; 7th international colloquium ; January 14 - 15, 2009
N2  - The utilisation of vehicle-oriented gasoline in general aviation is very desirable for both ecological and economical reasons, as well as for general considerations of availability. As of today vehicle fuels may be used if the respective engine and cell are certified for such an operation. For older planes a supplementary technical certificate is provided for gasoline mixtures with less than 1 % v/v ethanol only, though. Larger admixtures of ethanol may lead to sudden engine malfunction and should be considered as considerable security risks. Major problems are caused by the partially ethanol non-withstanding materials, a necessarily changed stochiometric adjustment of the engine for varying ethanol shares and the tendency for phase separation in the presence of absorbed water. The concepts of the flexible fuel vehicles are only partially applicable in the view of air security.
Y1  - 2009
SN  - 978-3-924813-75-8
SP  - 237
EP  - 244
PB  - Technische Akademie Esslingen (TAE)
CY  - Ostfildern
ER  - 
TY  - JOUR
A1  - Scholz, A.
A1  - Ley, Wilfried
A1  - Dachwald, Bernd
A1  - Miau, J. J.
A1  - Juang, J. C.
T1  - Flight results of the COMPASS-1 picosatellite mission
JF  - Acta Astronautica. 67 (2010), H. 9-10
Y1  - 2010
SN  - 0094-5765
SP  - 1289
EP  - 1298
ER  - 
TY  - JOUR
A1  - Blome, Hans-Joachim
A1  - Chicone, Carmen
A1  - Hehl, Friedrich W.
A1  - Mashhoon, Bahram
T1  - Nonlocal modification of Newtonian gravity
JF  - Physical Review D
Y1  - 2010
SN  - 0556-2821
N1  - 11 pages
VL  - 81
IS  - 6
SP  - 065020
ER  - 
TY  - JOUR
A1  - Esch, Thomas
T1  - Trends in der Nutzfahrzeugantriebstechnik
JF  - Motortechnische Zeitschrift (MTZ)
Y1  - 2010
SN  - 0024-8525
U6  - http://dx.doi.org/10.1007/bf03225608
VL  - 71
IS  - 10
SP  - 652
EP  - 658
PB  - Springer Nature
CY  - Basel
ER  - 
TY  - JOUR
A1  - Maiwald, Volker
A1  - Dachwald, Bernd
T1  - Mission Design for a Multiple-Rendezvous Mission to Jupiter's Trojans
Y1  - 2010
N1  - COSPAR 2010 ; 38th COSPAR Scientific Assembly. Held 18-25 July 2010 in Bremen, Germany [Abstract]
SP  - 3
ER  - 
TY  - JOUR
A1  - Börner, Sebastian
A1  - Funke, Harald
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Control system modifications for a hydrogen fuelled gas-turbine
JF  - ISROMAC 13, 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, HI, US, Apr 4-7, 2010
Y1  - 2010
SN  - 978-1-617-38848-4
SP  - 665
EP  - 670
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Robinson, A. E.
A1  - Hendrick, P.
A1  - Wagemakers, R.
T1  - Design and Testing of a Micromix Combustor With Recuperative Wall Cooling for a Hydrogen Fuelled µ-Scale Gas Turbine
JF  - Proceedings of the ASME Turbo Expo 2010 : presented at the 2010 ASME Turbo Expo, June 14 - 18, 2010, Glasgow, UK / sponsored by the International Gas Turbine Institute / Vol. 5: Industrial and cogeneration ; microturbines and small turbomachinery ; oil and gas applications ; wind turbine technology
Y1  - 2010
SN  - 978-0-7918-4400-7
N1  - GT2010-23453 ; ASME Turbo Expo ; (Glasgow) : 2010.06.14-18
SP  - 587
EP  - 596
PB  - ASME
CY  - New York, NY
ER  - 
TY  - BOOK
A1  - Lemaitre, George
A1  - Blome, Hans-Joachim
ED  - Blome, Hans-Joachim
T1  - Von der klassischen Kosmologie zum Quantenkosmos
Y1  - 2010
SN  - 978-3-8171-3304-8
N1  - Ostwalds Klassiker der exakten Wissenschaften ; Bd. 304
PB  - Deutsch
CY  - Frankfurt am Main
ER  - 
TY  - JOUR
A1  - Lettini, Antonio
A1  - Havermann, Marc
A1  - Guidetti, Marco
A1  - Fornaciari, Andrea
T1  - Improved functionalities and energy saving potential on mobile machines combining electronics with flow sharing valve and variable displacement pump
JF  - IFK 7, 7th International Fluid Power Conference, Efficiency through Fluid Power, 7. Internationales Fluidtechnisches Kolloquium, Workshop Proceedings, Vol. 3, Aachen, DE, 22.-24. Mar, 2010
Y1  - 2010
SN  - 978-3-940565-92-1
N1  - IFK, 7, Internationales Fluidtechnisches Kolloquium, 7., Aachen, DE, 2010-03-22 - 2010-03-24
SP  - 103
EP  - 114
PB  - -
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Robinson, A.
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Low NOx H2 combustion for industrial gas turbines of various power ranges
JF  - 5th International Gas Turbine Conference ETN-IGTC, ETN-2010-42, Brussels, Belgium, October 2010
Y1  - 2010
ER  - 
TY  - JOUR
A1  - Recker, Elmar
A1  - Bosschaerts, Walter
A1  - Wagemakers, Rolf
A1  - Hendrick, Patrick
A1  - Funke, Harald
A1  - Börner, Sebastian
T1  - Experimental study of a round jet in cross-flow at low momentum ratio
JF  - 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics Lisbon, Portugal, 05-08 July, 2010 - 1
Y1  - 2010
SP  - 1
EP  - 13
ER  - 
TY  - THES
A1  - Kowalski, Julia
T1  - Streamline estimation from sparsely sampled q-space Magnetic Resonance data
Y1  - 2010
N1  - Master Thesis in Medical Physics, ETH Zurich
ER  -